summaryrefslogtreecommitdiff
path: root/stubs
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01typedefs: Add CPUStateLluís Vilanova1-2/+1
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 145641861239.30295.8564457138934628740.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-23move get_current_ram_size to virtio-balloon.cVladimir Sementsov-Ogievskiy1-5/+0
get_current_ram_size() is used only in virtio-balloon.c This patch moves it into virtio-balloon and make it static, to allow some balloon-specific tuning. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-16all: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-04stubs: Clean up includesPeter Maydell40-1/+40
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-3-git-send-email-peter.maydell@linaro.org
2016-02-02blockdev: Keep track of monitor-owned BDSMax Reitz2-0/+6
As a side effect, we can now make x-blockdev-del's check whether a BDS is actually owned by the monitor explicit. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-17kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIPPaolo Bonzini1-1/+1
This patch adds support for split IRQ chip mode. When KVM_CAP_SPLIT_IRQCHIP is enabled: 1.) The PIC, PIT, and IOAPIC are implemented in userspace while the LAPIC is implemented by KVM. 2.) The software IOAPIC delivers interrupts to the KVM LAPIC via kvm_set_irq. Interrupt delivery is configured via the MSI routing table, for which routes are reserved in target-i386/kvm.c then configured in hw/intc/ioapic.c 3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI, which is handled in target-i386/kvm.c and relayed to the software IOAPIC via ioapic_eoi_broadcast. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02main-loop: suppress warnings under qtestMichael S. Tsirkin1-0/+5
commit 01c22f2cdd4fcf02276ea10f48253850a5fd7259 ("main-loop: Suppress "I/O thread spun" warnings for qtest") doesn't actually disable the warning for everyone since some tests don't run under the qtest accelerator. Check qtest_driver instead. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1448882964-22433-1-git-send-email-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-12monitor/target-ppc: Define target_get_monitor_defAlexey Kardashevskiy2-0/+32
At the moment get_monitor_def() returns only registers from statically defined monitor_defs array. However there is a lot of BOOK3S SPRs which are not in the list and cannot be printed from the monitor. This adds a new target platform hook - target_get_monitor_def(). The hook is called if a register was not found in the static array returned by the target_monitor_defs() hook. The hook is only defined for POWERPC, it returns registered SPRs and fails on unregistered ones providing the user with information on what is actually supported on the running CPU. The register value is saved as uint64_t as it is the biggest supported register size; target_ulong cannot be used because of the stub - it is in a "common" code and cannot include "cpu.h", etc; this is also why the hook prototype is redefined in the stub instead of being included from some header. This replaces static descriptors for GPRs, FPRs, SRs with a helper which looks for a value in a corresponding array in the CPUPPCState. The immediate effect is that all 32 SRs can be printed now (instead of 16); later this can be reused for VSX or TM registers. This replaces callbacks for MSR and XER with static descriptors in monitor_defs as they are stored in CPUPPCState. While we are here, this adds "cr" as a synonym of "ccr". Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-06replay: initialization and deinitializationPavel Dovgalyuk1-0/+9
This patch introduces the functions for enabling the record/replay and for freeing the resources when simulator closes. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-11-06replay: checkpointsPavel Dovgalyuk1-0/+6
This patch introduces checkpoints that synchronize cpu thread and iothread. When checkpoint is met in the code all asynchronous events from the queue are executed. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-11-06replay: recording and replaying clock ticksPavel Dovgalyuk1-0/+13
Clock ticks are considered as the sources of non-deterministic data for virtual machine. This patch implements saving the clock values when they are acquired (virtual, host clock). When replaying the execution corresponding values are read from log and transfered to the module, which wants to read the values. Such a design required the clock polling to be synchronized. Sometimes it is not true - e.g. when timeouts for timer lists are checked. In this case we use a cached value of the clock, passing it to the client code. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2015-11-06replay: interrupts and exceptionsPavel Dovgalyuk1-0/+20
This patch includes modifications of common cpu files. All interrupts and exceptions occured during recording are written into the replay log. These events allow correct replaying the execution by kicking cpu thread when one of these events is found in the log. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05replay: global variables and function stubsPavel Dovgalyuk3-0/+17
This patch adds global variables, defines, function declarations, and function stubs for deterministic VM replay used by external modules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-22Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-0/+7
vhost, pc, virtio features, fixes, cleanups New features: VT-d support for devices behind a bridge vhost-user migration support Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (37 commits) hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT i386: keep cpu_model field in MachineState uptodate vhost: set the correct queue index in case of migration with multiqueue piix: fix resource leak reported by Coverity seccomp: add memfd_create to whitelist vhost-user-test: check ownership during migration vhost-user-test: add live-migration test vhost-user-test: learn to tweak various qemu arguments vhost-user-test: wrap server in TestServer struct vhost-user-test: remove useless static check vhost-user-test: move wait_for_fds() out vhost: add migration block if memfd failed vhost-user: use an enum helper for features mask vhost user: add rarp sending after live migration for legacy guest vhost user: add support of live migration net: add trace_vhost_user_event vhost-user: document migration log vhost: use a function for each call vhost-user: add a migration blocker vhost-user: send log shm fd along with log_base ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22vhost: add vhost_has_free_slot() interfaceIgor Mammedov2-0/+7
it will allow for other parts of QEMU check if it's safe to map memory region during hotplug/runtime. That way hotplug path will have a chance to cancel hotplug operation instead of crashing in vhost_commit(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-19qemu-char: convert vc backend to data-driven creationPaolo Bonzini2-8/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert spice backend to data-driven creationPaolo Bonzini2-15/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert testdev backend to data-driven creationPaolo Bonzini2-8/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert braille backend to data-driven creationPaolo Bonzini2-8/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert msmouse backend to data-driven creationPaolo Bonzini2-8/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16monitor: remove target-specific code from monitor.cPavel Butsykin2-0/+10
Move target-specific code out of /monitor.c to /target-*/monitor.c, this will avoid code cluttering and using random ifdeffery. The solution is quite simple, but solves the issue of the separation of target-specific code from monitor. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01main-loop: introduce qemu_mutex_iothread_lockedPaolo Bonzini1-0/+5
This function will be used to avoid recursive locking of the iothread lock whenever address_space_rw/ld*/st* are called with the BQL held, which is almost always the case. Tracking whether the iothread is owned is very cheap (just use a TLS variable) but requires some care because now the lock must always be taken with qemu_mutex_lock_iothread(). Previously this wasn't the case. Outside TCG mode this is not a problem. In TCG mode, we need to be careful and avoid the "prod out of compiled code" step if already in a VCPU thread. This is easily done with a check on current_cpu, i.e. qemu_in_vcpu_thread(). Hopefully, multithreaded TCG will get rid of the whole logic to kick VCPUs whenever an I/O event occurs! Cc: Frederic Konrad <fred.konrad@greensocs.com> Message-Id: <1434646046-27150-3-git-send-email-pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Finally unused, clean upMarkus Armbruster3-9/+2
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-1/+1
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-12iohandler: Change return type of qemu_set_fd_handler to "void"Fam Zheng1-4/+4
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-14-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12main-loop: Drop qemu_set_fd_handler2Fam Zheng1-9/+0
All users are converted to qemu_set_fd_handler now, drop qemu_set_fd_handler2 and IOHandlerRecord.fd_read_poll. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-9-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12stubs: Add qemu_set_fd_handlerFam Zheng1-0/+8
Some qemu_set_fd_handler2 stub callers will be converted to call qemu_set_fd_handler, add this stub for them before making the change. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Change return type of monitor_cur_is_qmp() to boolMarkus Armbruster1-2/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-11/+0
pci, pc, virtio fixes and cleanups A bunch of fixes all over the place. All of ACPI refactoring has been merged. Legacy pci commands have been dropped. virtio header cleanup initial patches from virtio-1.0 branch Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (130 commits) acpi: drop unused code aml-build: comment fix acpi-build: fix typo in comment acpi: update generated files vhost user:support vhost user nic for non msi guests aml-build: fix build for glib < 2.22 acpi: update generated files Makefile.target: binary depends on config-devices acpi-test-data: update after pci rewrite acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb(). pci-hotplug-old: Has been dead for five major releases, bury pci: Give a few helpers internal linkage acpi: make build_*() routines static to aml-build.c pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs pc: acpi-build: drop template patching and create PCI bus tree dynamically tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation pc: acpi-build: simplify PCI bus tree generation tests: add ACPI blobs for qemu with bridge cases tests: bios-tables-test: add support for testing bridges tests: ACPI test blobs update due to PCI0._CRS changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: hw/pci/pci-hotplug-old.c
2015-03-04pc-dimm: add a function to calculate VM's current RAM sizezhanghailiang1-0/+5
The global parameter 'ram_size' does not take into account the hotplugged memory. In some codes, we use 'ram_size' as current VM's real RAM size, which is not correct. Add function 'get_current_ram_size' to calculate VM's current RAM size, it will enumerate present memory devices and also plus ram_size. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-01pci-hotplug-old: Has been dead for five major releases, buryMarkus Armbruster2-11/+0
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make variable, not as preprocessor macro, killing the code conditional on defined(CONFIG_PCI_HOTPLUG_OLD). In all this time, nobody reported the loss. I only noticed it when I tried to test some error reporting change that forced me to touch this old crap again. Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward compatibility god has been strong enough to sacrifice at its altar about a dozen times, but not strong enough to even once verify the legacy feature's still there, let alone works. Remove the commands along with the code backing them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-10stubs: Fix warning caused by missing include statementStefan Weil1-1/+1
Warning from the Sparse static analysis tool: stubs/qtest.c:14:6: warning: symbol 'qtest_allowed' was not declared. Should it be static? Add the missing include statement which declares qtest_allowed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-10-20block: Code motion to get rid of stubs/blockdev.cMarkus Armbruster2-13/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25block: Keep DriveInfo alive until BlockDriverState diesMarkus Armbruster2-0/+13
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not the BDS. This can happen in three places: * Device model destruction during unplug: blockdev_auto_del() * Xen IDE unplug: pci_piix3_xen_ide_unplug() * drive_del command when no device model is attached: do_drive_del() The other callers of drive_del are on error paths where refcnt == 1. If the user somehow manages to plug in a device model using a BDS that has gone through drive_del(), the legacy configuration passed in DriveInfo doesn't reach the device model, and automatic deletion on unplug doesn't work. Worse, some device models such as scsi-disk crash when DriveInfo doesn't exist. This is theoretical; I didn't research an actual reproducer. The problem was introduced when we replaced DriveInfo reference counting by BDS reference counting in commit a94a3fa..fa510eb. Fix by keeping DriveInfo alive until its BDS dies. This affects qemu_drive_opts: now you can't reuse the same ID for new drive options until the BDS dies. Before, you could, but since the code always attempts to create a BDS with the same ID next, the enclosing operation "create a new drive" failed anyway. Different error path, same result. Unfortunately, the fix involves use of blockdev.c stuff from block.c, which is a layering violation. Fortunately, my forthcoming BlockBackend work will get rid of it again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-18monitor: fix use after freeMichael S. Tsirkin1-2/+1
The function monitor_fdset_dup_fd_find_remove() references member of 'mon_fdset' which - when remove flag is set - may be freed in function monitor_fdset_cleanup(). remove is set by monitor_fdset_dup_fd_remove which in practice does not need the returned value, so make it void, and return -1 from monitor_fdset_dup_fd_find_remove. Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-08-06backends: Introduce chr-testdevPaolo Bonzini2-0/+8
From: Paolo Bonzini <pbonzini@redhat.com> chr-testdev enables a virtio serial channel to be used for guest initiated qemu exits. hw/misc/debugexit already enables guest initiated qemu exits, but only for PC targets. chr-testdev supports any virtio-capable target. kvm-unit-tests/arm is already making use of this backend. Currently there is a single command implemented, "q". It takes a (prefix) argument for the exit code, thus an exit is implemented by writing, e.g. "1q", to the virtio-serial port. It can be used as: $QEMU ... \ -device virtio-serial-device \ -device virtserialport,chardev=ctd -chardev testdev,id=ctd or, use: $QEMU ... \ -device virtio-serial-device \ -device virtconsole,chardev=ctd -chardev testdev,id=ctd to bind it to virtio-serial port0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-24Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell2-7/+0
* remotes/qmp-unstable/queue/qmp: (43 commits) monitor: protect event emission monitor: protect outbuf and mux_out with mutex qemu-char: make writes thread-safe qemu-char: move pty_chr_update_read_handler around qemu-char: do not call chr_write directly qemu-char: introduce qemu_chr_alloc qapi event: clean up qapi event: convert QUORUM events qapi event: convert GUEST_PANICKED qapi event: convert BALLOON_CHANGE qmp: convert ACPI_DEVICE_OST event qapi event: convert SPICE events qapi event: convert VNC events qapi event: convert NIC_RX_FILTER_CHANGED qapi event: convert other BLOCK_JOB events qapi event: convert BLOCK_IMAGE_CORRUPTED qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR qapi event: convert DEVICE_TRAY_MOVED qapi event: convert DEVICE_DELETED qapi event: convert WATCHDOG ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23qapi event: clean upWenchao Xia2-7/+0
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23libqemustub: add more stubs for qemu-charNikolay Nikolaev3-0/+23
Additional stubs: - chr_baum_init - qemu_chr_open_spice_vmc - qemu_chr_open_spice_port Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-1/+6
staging Block pull request # gpg: Signature made Mon 23 Jun 2014 09:53:49 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: block: asynchronously stop the VM on I/O errors vl: allow other threads to do qemu_system_vmstop_request sheepdog: fix NULL dereference in sd_create QemuOpts: check NULL opts in qemu_opt_get functions block: m25p80: Support read only bdrvs. block: m25p80: sync_page(): Deindent function body. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23console: move chardev declarations to sysemu/char.hMichael S. Tsirkin1-1/+1
move generic chardev APIs to sysemu/char.h, to make them available to callers which can not depend on the whole of ui/console.h. This fixes a build error on systems without pixman-devel: ./configure --disable-tools --disable-docs --target-list=arm-linux-user ... pixman none ... make ... In file included from /data/home/nchip/linaro/qemu/include/ui/console.h:4:0, from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2: /data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal error: pixman.h: No such file or directory #include <pixman.h> ^ compilation terminated. Reported-by: Riku Voipio <riku.voipio@iki.fi> Tested-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23block: asynchronously stop the VM on I/O errorsPaolo Bonzini1-1/+6
With virtio-blk dataplane, I/O errors might occur while QEMU is not in the main I/O thread. However, it's invalid to call vm_stop when we're neither in a VCPU thread nor in the main I/O thread, even if we were to take the iothread mutex around it. To avoid this problem, we can raise a request to the main I/O thread, similar to what QEMU does when vm_stop is called from a CPU thread. We know that bdrv_error_action is called from an AIO callback, and the moment at which the callback will fire is not well-defined; it depends on the moment at which the disk or OS finishes the operation, which can happen at any time. Note that QEMU is certainly not in a CPU thread and we do not need to call cpu_stop_current() like vm_stop() does. However, we need to ensure that any action taken by management will result in correct detection of the error _and_ a running VM. In particular: - the event must be raised after the iostatus has been set, so that "info block" will return an iostatus that matches the event. - the VM must be stopped after the iostatus has been set, so that "info block" will return an iostatus that matches the runstate. The ordering between the STOP and BLOCK_IO_ERROR events is preserved; BLOCK_IO_ERROR is documented to come first. This makes bdrv_error_action() thread safe (assuming QMP events are, which is attacked by a separate series). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-19qmp: add query-memory-devices commandIgor Mammedov2-0/+8
... allowing to get state of present memory devices. Currently implemented only for PCDIMMDevice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add qtest for vhost-userNikolay Nikolaev1-2/+4
This test creates a 'server' chardev to listen for vhost-user messages. Once VHOST_USER_SET_MEM_TABLE is received it mmaps each received region, and read 1k bytes from it. The read data is compared to data from readl. The test requires hugetlbfs to be already mounted and writable. The mount point defaults to '/hugetlbfs' and can be specified via the environment variable QTEST_HUGETLBFS_PATH. The rom pc-bios/pxe-virtio.rom is used to instantiate a virtio pcicontroller. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix up coding style MST: disable vhost test temporarily This test needs a bit more work: issues have been found on legacy systems, disable it for now to avoid false positives for people. Will re-enable after issues are addressed. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19libqemustub: add stubs to be able to use qemu-char.cNikolay Nikolaev9-0/+57
chardev depends on lots of external symbols that are not necessarily needed to be able to use, for example, 'socket chardev'. So add stubs for these functions: - bdrv_commit_all - qemu_chr_open_msmouse - is_daemonized - qemu_add_machine_init_done_notifier - monitor_init - qemu_notify_event - vc_init and this array: - serial_hds Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16dump: Make DumpState and endian conversion routines available for ↵Bharata B Rao1-1/+1
arch-specific dump code Make DumpState and endian conversion routines available for arch-specific dump code by moving into dump.h. DumpState will be needed by arch-specific dump code to access target endian information from DumpState->ArchDumpInfo. Also break the dependency of dump.h from stubs/dump.c by creating a separate dump-arch.h. This patch doesn't change any functionality. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [ rebased on top of current master branch, renamed endian helpers to cpu_to_dump{16,32,64}, pass a DumpState * argument to endian helpers, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [agraf: fix to apply] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-04-25qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTEDCole Robinson1-1/+1
The former is only used twice, the latter is used over 30 times, and has a nicer error message. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25monitor: Remove unused monitor_print_filenameCole Robinson2-7/+0
Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-03-14blockdev: Refuse to open encrypted image unless pausedMarkus Armbruster2-0/+7
Opening an encrypted image takes an additional step: setting the key. Between open and the key set, the image must not be used. We have some protection against accidental use in place: you can't unpause a guest while we're missing keys. You can, however, hot-plug block devices lacking keys into a running guest just fine, or insert media lacking keys. In the latter case, notifying the guest of the insert is delayed until the key is set, which may suffice to protect at least some guests in common usage. This patch makes the protection apply in more cases, in a rather heavy-handed way: it doesn't let you open encrypted images unless we're in a paused state. It doesn't extend the protection to users other than the guest (block jobs?). Use of runstate_check() from block.c is disgusting. Best I can do right now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 14:44:50 +0000