summaryrefslogtreecommitdiff
path: root/stubs
AgeCommit message (Collapse)AuthorFilesLines
2014-03-14blockdev: Refuse to open encrypted image unless pausedMarkus Armbruster2-0/+7
Opening an encrypted image takes an additional step: setting the key. Between open and the key set, the image must not be used. We have some protection against accidental use in place: you can't unpause a guest while we're missing keys. You can, however, hot-plug block devices lacking keys into a running guest just fine, or insert media lacking keys. In the latter case, notifying the guest of the insert is delayed until the key is set, which may suffice to protect at least some guests in common usage. This patch makes the protection apply in more cases, in a rather heavy-handed way: it doesn't let you open encrypted images unless we're in a paused state. It doesn't extend the protection to users other than the guest (block jobs?). Use of runstate_check() from block.c is disgusting. Best I can do right now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13main-loop: Suppress "I/O thread spun" warnings for qtestPeter Maydell2-0/+15
When running under qtest we don't actually have any vcpu threads to be starved, so the warning about the I/O thread spinning isn't relevant, and the way qtest manipulates the simulated clock means the warning is produced a lot as a false positive. Suppress it if qtest_enabled(), so 'make check' output is less noisy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-02stubs: Optimize dependencies for gdbstub.cStefan Weil1-1/+3
It does not need qemu-common.h. Including exec/gdbstub.h fixes a warning from static code analyzers and avoids mismatching declarations for xml_builtin. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-26kvm: Introduce kvm_arch_irqchip_createChristoffer Dall2-0/+8
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation for architecture-specific use of the device control API to create IRQ chips. Following patches will implement the ARM irqchip create method to prefer the device control API over the older KVM_CREATE_IRQCHIP API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-17Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori1-5/+1
# By Liu Ping Fan (3) and Jan Kiszka (1) # Via Jan Kiszka * kiszka/queues/slirp: slirp: clean up slirp_update_timeout slirp: set mainloop timeout with more precise value slirp: define timeout as macro slirp: make timeout local Message-id: cover.1379415024.git.jan.kiszka@siemens.com
2013-09-17slirp: set mainloop timeout with more precise valueLiu Ping Fan1-5/+1
If slirp needs to emulate tcp timeout, then the timeout value for mainloop should be more precise, which is determined by slirp's fasttimo or slowtimo. Achieve this by swap the logic sequence of slirp_pollfds_fill and slirp_update_timeout. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-12scsi: prefer UUID to VM name for the initiator namePaolo Bonzini2-0/+13
The UUID is unique even across multiple hosts, thus it is better than a VM name even if it is less user-friendly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-22aio / timers: Rearrange timer.h & make legacy functions call non-legacyAlex Bligh1-1/+1
Rearrange timer.h so it is in order by function type. Make legacy functions call non-legacy functions rather than vice-versa. Convert cpus.c to use new API. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-08dump: rebase from host-private RAMBlock offsets to guest-physical addressesLaszlo Ersek1-1/+2
RAMBlock.offset --> GuestPhysBlock.target_start RAMBlock.offset + RAMBlock.length --> GuestPhysBlock.target_end RAMBlock.length --> GuestPhysBlock.target_end - GuestPhysBlock.target_start "GuestPhysBlock.host_addr" is only used when writing the dump contents. This patch enables "crash" to work with the vmcore by rebasing the vmcore from the left side of the following diagram to the right side: host-private offset relative to ram_addr RAMBlock guest-visible paddrs 0 +-------------------+.....+-------------------+ 0 | ^ | | ^ | | 640 KB | | 640 KB | | v | | v | 0x0000a0000 +-------------------+.....+-------------------+ 0x0000a0000 | ^ | |XXXXXXXXXXXXXXXXXXX| | 384 KB | |XXXXXXXXXXXXXXXXXXX| | v | |XXXXXXXXXXXXXXXXXXX| 0x000100000 +-------------------+.....+-------------------+ 0x000100000 | ^ | | ^ | | 3583 MB | | 3583 MB | | v | | v | 0x0e0000000 +-------------------+.....+-------------------+ 0x0e0000000 | ^ |. |XXXXXXXXXXXXXXXXXXX| | above_4g_mem_size | . |XXXX PCI hole XXXXX| | v | . |XXXX XXXXX| ram_size +-------------------+ . |XXXX 512 MB XXXXX| . .|XXXXXXXXXXXXXXXXXXX| . +-------------------+ 0x100000000 . | ^ | . | above_4g_mem_size | .| v | +-------------------+ ram_size + 512 MB Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-27cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XMLAndreas Färber2-0/+6
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field. Use first_cpu for qSupported and qXfer:features:read: for now. Add a stub for xml_builtin. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-15cpus: Add return value for vm_stop()Kevin Wolf1-1/+1
If flushing the block devices fails, return an error. The VM is stopped anyway. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-28cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber1-0/+4
This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber1-0/+1
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11dump: Drop qmp_dump_guest_memory() stub and build for all targetsAndreas Färber1-8/+0
qmp_dump_guest_memory() calls dump_init() and returns an Error when cpu_get_dump_info() returns an error, as done by the stub. So there is no need to have a stub for qmp_dump_guest_memory(). Enable the documentation of the always-present dump-guest-memory command. That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure completely out of the picture for target CPU features. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10dump: Move stubs into libqemustub.aAndreas Färber2-0/+37
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency on CONFIG_HAVE_CORE_DUMP. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01cpu: Introduce cpu_resume(), for single CPUIgor Mammedov2-0/+6
Also add a stub for it, to make possible to use it in qom/cpu.c, which is shared with user emulators. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLYAndreas Färber1-0/+2
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini2-0/+11
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-21slirp: switch to GPollFDStefan Hajnoczi1-4/+2
Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-12stubs: fully replace qemu-tool.c and qemu-user.cPaolo Bonzini14-2/+126
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-08libqemustub: sysbus_get_default() stubEduardo Habkost2-0/+7
The stub will be used on cases where sysbus.c is not compiled in (e.g. *-user). Note that code that uses NULL as the bus with qdev{_try,}_create() implicitly uses sysbus_get_default() as the bus, and will still require sysbus.c to be compiled in. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08libqemustub: vmstate register/unregister stubsEduardo Habkost2-0/+18
Add vmstate stub functions, so that qdev.o can be used without savevm.o when vmstate support is not necessary (i.e. by *-user). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08libqemustub: Add qemu_[un]register_reset() stubsEduardo Habkost2-0/+14
This will be useful for code that don't call qemu_devices_reset() (e.g. *-user). If qemu_devices_reset() is never called, it means we don't need to keep track of the reset handler list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini5-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-18build: replace weak symbols with a static libraryPaolo Bonzini9-0/+70
Weak symbols were a nice idea, but they turned out not to be a good one. Toolchain support is just too sparse, in particular llvm-gcc is totally broken. This patch uses a surprisingly low-tech approach: a static library. Symbols in a static library are always overridden by symbols in an object file. Furthermore, if you place each function in a separate source file, object files for unused functions will not be taken in. This means that each function can use all the dependencies that it needs (especially QAPI stuff such as error_setg). Thus, all stubs are placed in separate object files and put together in a static library. The library then is linked to all programs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 12:04:16 +0000