summaryrefslogtreecommitdiff
path: root/softmmu_template.h
AgeCommit message (Collapse)AuthorFilesLines
2014-11-03softmmu: provide softmmu access type enumLeon Alrae1-10/+16
New MIPS features depend on the access type and enum is more convenient than using the numbers directly. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-09-01implementing victim TLB for QEMU system emulated TLBXin Tong1-4/+39
QEMU system mode page table walks are expensive. Taken by running QEMU qemu-system-x86_64 system mode on Intel PIN , a TLB miss and walking a 4-level page tables in guest Linux OS takes ~450 X86 instructions on average. QEMU system mode TLB is implemented using a directly-mapped hashtable. This structure suffers from conflict misses. Increasing the associativity of the TLB may not be the solution to conflict misses as all the ways may have to be walked in serial. A victim TLB is a TLB used to hold translations evicted from the primary TLB upon replacement. The victim TLB lies between the main TLB and its refill path. Victim TLB is of greater associativity (fully associative in this patch). It takes longer to lookup the victim TLB, but its likely better than a full page table walk. The memory translation path is changed as follows : Before Victim TLB: 1. Inline TLB lookup 2. Exit code cache on TLB miss. 3. Check for unaligned, IO accesses 4. TLB refill. 5. Do the memory access. 6. Return to code cache. After Victim TLB: 1. Inline TLB lookup 2. Exit code cache on TLB miss. 3. Check for unaligned, IO accesses 4. Victim TLB lookup. 5. If victim TLB misses, TLB refill 6. Do the memory access. 7. Return to code cache The advantage is that victim TLB can offer more associativity to a directly mapped TLB and thus potentially fewer page table walks while still keeping the time taken to flush within reasonable limits. However, placing a victim TLB before the refill path increase TLB refill path as the victim TLB is consulted before the TLB refill. The performance results demonstrate that the pros outweigh the cons. some performance results taken on SPECINT2006 train datasets and kernel boot and qemu configure script on an Intel(R) Xeon(R) CPU E5620 @ 2.40GHz Linux machine are shown in the Google Doc link below. https://docs.google.com/spreadsheets/d/1eiItzekZwNQOal_h-5iJmC4tMDi051m9qidi5_nwvH4/edit?usp=sharing In summary, victim TLB improves the performance of qemu-system-x86_64 by 11% on average on SPECINT2006, kernelboot and qemu configscript and with highest improvement of in 26% in 456.hmmer. And victim TLB does not result in any performance degradation in any of the measured benchmarks. Furthermore, the implemented victim TLB is architecture independent and is expected to benefit other architectures in QEMU as well. Although there are measurement fluctuations, the performance improvement is very significant and by no means in the range of noises. Signed-off-by: Xin Tong <trent.tong@gmail.com> Message-id: 1407202523-23553-1-git-send-email-trent.tong@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: move softmmu_template.h out of include/Paolo Bonzini1-0/+533
It is only included in cputlb.c now. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-354/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-03tcg: Add extended GETPC mechanism for MMU helpers with ldst optimizationYeongkyoon Lee1-8/+8
Add GETPC_EXT which is used by MMU helpers to selectively calculate the code address of accessing guest memory when called from a qemu_ld/st optimized code or a C function. Currently, it supports only i386 and x86-64 hosts. Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-6/+6
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl1-45/+27
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-04-15w64: Fix data types in softmmu*.hStefan Weil1-10/+12
w64 requires uintptr_t. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl1-10/+10
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18softmmu templates: optionally pass CPUState to memory access functionsBlue Swirl1-27/+57
Optionally, make memory access helpers take a parameter for CPUState instead of relying on global env. On most targets, perform simple moves to reorder registers. On i386, switch from regparm(3) calling convention to standard stack-based version. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18i386: Remove REGPARMBlue Swirl1-5/+3
Use stack based calling convention (GCC default) for interfacing with generated code instead of register based convention (regparm(3)). Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-08memory: dispatch directly via MemoryRegionAvi Kivity1-24/+24
Instead of indirecting via io_mem_region, dispatch directly through the MemoryRegion obtained from the iotlb or phys_page_find(). Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-08memory: store section indices in iotlb instead of io indicesAvi Kivity1-4/+4
A step towards eliminating io indices. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-04Remove IO_MEM_SHIFTAvi Kivity1-2/+2
We no longer use any of the lower bits of a ram_addr, so we might as well use them for the io table index. This increases the number of potential I/O handlers by a factor of 8. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert IO_MEM_{RAM,ROM,UNASSIGNED,NOTDIRTY} to MemoryRegionsAvi Kivity1-4/+7
Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED, and IO_MEM_NOTDIRTY io handlers to MemoryRegions. These aren't real regions, since they are never added to the memory hierarchy, but they allow reuse of the dispatch functionality. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Avoid range comparisons on io index typesAvi Kivity1-2/+4
The code sometimes uses range comparisons on io indexes (e.g. index =< IO_MEM_ROM). Avoid these as they make moving to objects harder. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04memory: move mmio access to functionsAvi Kivity1-10/+10
Currently mmio access goes directly to the io_mem_{read,write} arrays. In preparation for eliminating them, add indirection via a function. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl1-4/+4
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01Document softmmu templatesBlue Swirl1-0/+5
Add some comments to describe each file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-05Split TLB addend and target_phys_addr_tPaul Brook1-12/+16
Historically the qemu tlb "addend" field was used for both RAM and IO accesses, so needed to be able to hold both host addresses (unsigned long) and guest physical addresses (target_phys_addr_t). However since the introduction of the iotlb field it has only been used for RAM accesses. This means we can change the type of addend to unsigned long, and remove associated hacks in the big-endian TCG backends. We can also remove the host dependence from target_phys_addr_t. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-29Compile qemu-timer only onceBlue Swirl1-0/+2
Arrange various declarations so that also non-CPU code can access them, adjust users. Move CPU specific code to cpus.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28softmmu: Dont clobber retaddr in slow_ldx().Edgar E. Iglesias1-1/+0
When splitting up unaligned IO accesses, ld calls slow_ld which was clobbering retaddr. AFAIK the problem only shows up when running emulations with -icount that may abort TB execution on IO accesses. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-6/+6
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-6/+6
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-08-24Unbreak large mem support by removing kqemuAnthony Liguori1-6/+0
kqemu introduces a number of restrictions on the i386 target. The worst is that it prevents large memory from working in the default build. Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on the TSC as a time source which will not be reliable on a multiple processor system in userspace. Since most modern processors are multicore, this severely limits the utility of kqemu. kvm is a viable alternative for people looking to accelerate qemu and has the benefit of being supported by the upstream Linux kernel. If someone can implement work arounds to remove the restrictions introduced by kqemu, I'm happy to avoid and/or revert this patch. N.B. kqemu will still function in the 0.11 series but this patch removes it from the 0.12 series. Paul, please Ack or Nack this patch. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl1-2/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-04-19kqemu: merge CONFIG_KQEMU and USE_KQEMUblueswir11-2/+2
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel321-1/+1
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-18Set mem_io_vaddr on io_read (Jan Kiszka)aliguori1-0/+1
Analogously to write accesses, we have to save the memory address also on read accesses in order to support read watchpoints. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5739 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-29Add instruction counter.pbrook1-5/+17
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4799 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-09Clean up MMIO TLB handling.pbrook1-21/+27
The IO index is now stored in its own field, instead of being wedged into the vaddr field. This eliminates the ROMD and watchpoint host pointer weirdness. The IO index space is expanded by 1 bit, and several additional bits are made available in the TLB vaddr field. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4704 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-31use simpler REGPARM convention - make CPUTLBEntry size a power of twobellard1-5/+5
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3935 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Don't compare '\0' against pointers.balrog1-0/+2
Add a note from Fabrice in slow_st template. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3669 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Check permissions for the last byte first in unaligned slow_st accesses ↵balrog1-1/+1
(patch from TeLeMan). git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3665 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-14Replace is_user variable with mmu_idx in softmmu core,j_mayer1-30/+30
allowing support of more than 2 mmu access modes. Add backward compatibility is_user variable in targets code when needed. Implement per target cpu_mmu_index function, avoiding duplicated code and #ifdef TARGET_xxx in softmmu core functions. Implement per target mmu modes definitions. As an example, add PowerPC hypervisor mode definition and Alpha executive and kernel modes definitions. Optimize PowerPC case, precomputing mmu_idx when MSR register changes and using the same definition in code translation code. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths1-2/+2
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-17/+17
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2006-02-08added last_io_time fieldbellard1-0/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1752 c046a42c-6fe2-441c-8c8c-71466251a162
2005-12-05MIPS unaligned accesses exceptions (Daniel Jacobowitz)bellard1-1/+27
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1688 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-28PAGE_EXEC support in TLBsbellard1-8/+11
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1676 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-26use TARGET_PAGE_SIZE (Paul Brook)bellard1-4/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1659 c046a42c-6fe2-441c-8c8c-71466251a162
2005-07-24allow more than 32 bit of physical memorybellard1-10/+10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1526 c046a42c-6fe2-441c-8c8c-71466251a162
2005-01-0364 bit target supportbellard1-12/+16
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1189 c046a42c-6fe2-441c-8c8c-71466251a162
2004-10-03removed access_type hackbellard1-30/+40
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1095 c046a42c-6fe2-441c-8c8c-71466251a162
2004-06-03support for opaque data on memory I/Osbellard1-10/+10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@874 c046a42c-6fe2-441c-8c8c-71466251a162
2004-04-25precise self modifying code supportbellard1-8/+12
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@745 c046a42c-6fe2-441c-8c8c-71466251a162
2004-02-06added generic physical memory dirty bit supportbellard1-5/+5
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@601 c046a42c-6fe2-441c-8c8c-71466251a162
2004-01-18cast to return typebellard1-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@556 c046a42c-6fe2-441c-8c8c-71466251a162
2003-11-09soft mmu fix (aka debian random seg fault fix)bellard1-2/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@443 c046a42c-6fe2-441c-8c8c-71466251a162
2003-10-27full softmmu supportbellard1-32/+50
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@410 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 22:18:03 +0000