summaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)AuthorFilesLines
2015-10-19fw_cfg: insert string blobs via qemu cmdlineGabriel L. Somlo1-1/+6
Allow users to provide custom fw_cfg blobs with ascii string payloads specified directly on the qemu command line. Suggested-by: Jordan Justen <jordan.l.justen@intel.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Message-id: 1443544141-26568-1-git-send-email-somlo@cmu.edu Reviewd-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-12netfilter: add a netbuffer filterYang Hongyang1-0/+17
This filter is to buffer/release packets. Can be used when using MicroCheckpointing or other Remus like VM FT solutions. You can also use it to crudely simulate network delay. Doesn't actually delay individual packets, but batches them together, which is a delay of sorts. Usage: -netdev tap,id=bn0 -object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000 NOTE: Interval is in microseconds, it can't be omitted currently, and can't be 0. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-09-24vhost-user: add multiple queue supportChangchun Ouyang1-2/+3
This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-15ui: convert VNC server to use QCryptoTLSSessionDaniel P. Berrange1-2/+26
Switch VNC server over to using the QCryptoTLSSession object for the TLS session. This removes the direct use of gnutls from the VNC server code. It also removes most knowledge about TLS certificate handling from the VNC server code. This has the nice effect that all the CONFIG_VNC_TLS conditionals go away and the user gets an actual error message when requesting TLS instead of it being silently ignored. With this change, the existing configuration options for enabling TLS with -vnc are deprecated. Old syntax for anon-DH credentials: -vnc hostname:0,tls New syntax: -object tls-creds-anon,id=tls0,endpoint=server \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, no client certs: -vnc hostname:0,tls,x509=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, requiring client certs: -vnc hostname:0,tls,x509verify=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \ -vnc hostname:0,tls-creds=tls0 This aligns VNC with the way TLS credentials are to be configured in the future for chardev, nbd and migration backends. It also has the benefit that the same TLS credentials can be shared across multiple VNC server instances, if desired. If someone uses the deprecated syntax, it will internally result in the creation of a 'tls-creds' object with an ID based on the VNC server ID. This allows backwards compat with the CLI syntax, while still deleting all the original TLS code from the VNC server. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15crypto: introduce new module for TLS x509 credentialsDaniel P. Berrange1-0/+27
Introduce a QCryptoTLSCredsX509 class which is used to manage x509 certificate TLS credentials. This will be the preferred credential type offering strong security characteristics Example CLI configuration: $QEMU -object tls-creds-x509,id=tls0,endpoint=server,\ dir=/path/to/creds/dir,verify-peer=yes The 'id' value in the -object args will be used to associate the credentials with the network services. For example, when the VNC server is later converted it would use $QEMU -object tls-creds-x509,id=tls0,.... \ -vnc 127.0.0.1:1,tls-creds=tls0 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15crypto: introduce new module for TLS anonymous credentialsDaniel P. Berrange1-0/+20
Introduce a QCryptoTLSCredsAnon class which is used to manage anonymous TLS credentials. Use of this class is generally discouraged since it does not offer strong security, but it is required for backwards compatibility with the current VNC server implementation. Simple example CLI configuration: $QEMU -object tls-creds-anon,id=tls0,endpoint=server Example using pre-created diffie-hellman parameters $QEMU -object tls-creds-anon,id=tls0,endpoint=server,\ dir=/path/to/creds/dir The 'id' value in the -object args will be used to associate the credentials with the network services. For example, when the VNC server is later converted it would use $QEMU -object tls-creds-anon,id=tls0,.... \ -vnc 127.0.0.1:1,tls-creds=tls0 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-11help: dd missing newlineLaurent Vivier1-1/+1
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange1-1/+1
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10xen, gfx passthrough: basic graphics passthrough supportTiejun Chen1-0/+3
basic gfx passthrough support: - add a vga type for gfx passthrough - register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-07smbios: implement smbios support for mach-virtWei Huang1-1/+1
This patch generates smbios tables for ARM mach-virt. Also add CONFIG_SMBIOS=y for ARM default config. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com [PMM: Added missing braces around an if().] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-24qemu-doc: fix typosGonglei1-1/+1
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1435917057-9396-1-git-send-email-arei.gonglei@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-20Revert "vhost-user: add multi queue support"Michael S. Tsirkin1-3/+2
This reverts commit 830d70db692e374b55555f4407f96a1ceefdcc97. The interface isn't fully backwards-compatible, which is bad. Let's redo this properly after 2.4. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-02block/iscsi: restore compatiblity with libiscsi 1.9.0Peter Lieven1-1/+2
RHEL7 and others are stuck with libiscsi 1.9.0 since there unfortunately was an ABI breakage after that release. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1435313881-19366-1-git-send-email-pl@kamp.de Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02block/iscsi: add support for request timeoutsPeter Lieven1-0/+4
libiscsi starting with 1.15 will properly support timeout of iscsi commands. The default will remain no timeout, but this can be changed via cmdline parameters, e.g.: qemu -iscsi timeout=30 -drive file=iscsi://... If a timeout occurs a reconnect is scheduled and the timed out command will be requeued for processing after a successful reconnect. The required API call iscsi_set_timeout is present since libiscsi 1.10 which was released in October 2013. However, due to some bugs in the libiscsi code the use is not recommended before version 1.15. Please note that this patch bumps the libiscsi requirement to 1.10 to have all function and macros defined. The patch fixes also a off-by-one error in the NOP timeout calculation which was fixed while touching these code parts. Signed-off-by: Peter Lieven <pl@kamp.de> Message-id: 1434455107-19328-1-git-send-email-pl@kamp.de Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-26target-mips: add Unified Hosting Interface (UHI) supportLeon Alrae1-4/+6
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option will alter the behaviour of SDBBP 1 instruction -- UHI operation will be called instead of generating a debug exception. Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set to -1 if semihosting arguments are passed to indicate that the UHI operations should be used to obtain input arguments. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-23qemu-options: Use @itemx where appropriateMarkus Armbruster1-26/+26
Doesn't appear to make a difference, but let's use it consistently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23qemu-options: Improve -global documentationMarkus Armbruster1-2/+3
Recent commit 3751d7c "vl: allow full-blown QemuOpts syntax for -global" overloaded its existing argument syntax DRIVER.PROP=VALUE with QemuOpts syntax. Unambigious as long as no DRIVER contains '='. Its documentation claims that "the two syntaxes are equivalent." Improve it to spell out how exactly the old syntax gets desugared into the new one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-22Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell1-16/+54
into staging QOM infrastructure fixes and device conversions * Changes to name string ownership for alias properties * Improvements around enum properties * Cleanups around -object handling * New helper functions * Cleanups of qdev init helper functions * Add path argument to qom-tree script * QTest cleanup to use new qtest_add_data_func() consistently # gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: qdev: Un-deprecate qdev_init_nofail() qdev: Deprecated qdev_init() is finally unused, drop qom: Don't pass string table to object_get_enum() function qom: Add an object_property_add_enum() helper function qom: Make enum string tables const-correct qom: Add object_new_with_props() / object_new_withpropv() helpers qom: Add helper function for getting user objects root vl: Create (most) objects before creating chardev backends doc: Document user creatable object types in help text backends: Fix typename of 'policy' enum property in hostmem obj scripts: Add support for path as argument of qom-tree tests: Use qtest_add_data_func() consistently qdev: Free property names after registering gpio aliases qom: strdup() target property name on object_property_add_alias() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19doc: Document user creatable object types in help textDaniel P. Berrange1-16/+54
The QEMU help for -object is essentially useless, just giving users the generic syntax. Move it down into its own section and introduce a nested table where each user creatable object can be documented. The existing memory-backend-file, rng-random and rng-egd object types are documented. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19semihosting: add --semihosting-config arg sub-argumentLeon Alrae1-5/+16
Add new "arg" sub-argument to the --semihosting-config allowing the user to pass multiple input arguments separately. It is required for example by UHI semihosting to construct argc and argv. Also, update ARM semihosting to support new option (at the moment it is the only target which cares about arguments). If the semihosting is enabled and no semihosting args have been specified, then fall back to -kernel/-append. The -append string is split on whitespace before initializing semihosting.argv[1..n]; this is different from what QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole -append), but is more intuitive from UHI user's point of view and Linux kernel just does not care as it concatenates argv[1..n] into single cmdline string anyway. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-16Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150615-1' into ↵Peter Maydell1-1/+3
staging virtio-gpu: pci support bits and virtio-vga. # gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150615-1: virtio-vga: add vgabios configuration virtio-vga: add '-vga virtio' support virtio-vga: add virtio gpu device with vga compatibility virtio-gpu-pci: add virtio pci support virtio-gpu: fix error message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150615' into ↵Peter Maydell1-9/+17
staging s390x/kvm/watchdog 1. Implement a diag288 based watchdog 2. Fix virtio-ccw BIOS for gcc >= 4.9 # gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150615: s390/bios: build with -fdelete-null-pointer-checks watchdog: Add new Virtual Watchdog action INJECT-NMI nmi: Implement inject_nmi() for non-monitor context use s390x/watchdog: diag288 migration support s390x/kvm: diag288 instruction interception and handling s390x/watchdog: introduce diag288 watchdog device watchdog: change option wording to allow for more watchdogs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12throttle: Add throttle group supportAlberto Garcia1-0/+1
The throttle group support use a cooperative round robin scheduling algorithm. The principles of the algorithm are simple: - Each BDS of the group is used as a token in a circular way. - The active BDS computes if a wait must be done and arms the right timer. - If a wait must be done the token timer will be armed so the token will become the next active BDS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12virtio-vga: add '-vga virtio' supportGerd Hoffmann1-1/+3
Some convinience fluff: Add support for '-vga virtio', also add virtio-vga to the list of vga cards so '-device virtio-vga' will turn off the default vga. Written by Dave Airlie and Gerd Hoffmann. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-11s390x/watchdog: introduce diag288 watchdog deviceXu Wang1-0/+3
This patch introduces a new diag288 watchdog device that will, just like other watchdogs, monitor a guest and take corresponding actions when it detects that the guest is not responding. diag288 is s390x specific. The wiring to s390x KVM will be done in separate patches. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split out qemu-option.hx base changes]
2015-06-11watchdog: change option wording to allow for more watchdogsXu Wang1-9/+14
We will introduce a new watchdog for s390x. Lets adopt qemu-options.hx to allow more watchdog devices. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split out qemu-option.hx base changes]
2015-06-10fw_cfg: insert fw_cfg file blobs via qemu cmdlineGabriel L. Somlo1-0/+11
Allow user supplied files to be inserted into the fw_cfg device before starting the guest. Since fw_cfg_add_file() already disallows duplicate fw_cfg file names, qemu will exit with an error message if the user supplies multiple blobs with the same fw_cfg file name, or if a blob name collides with a fw_cfg name programmatically added from within the QEMU source code. A warning message will be printed if the fw_cfg item name does not begin with the prefix "opt/", which is recommended for external, user provided blobs. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-3/+16
* KVM error improvement from Laurent * CONFIG_PARALLEL fix from Mirek * Atomic/optimized dirty bitmap access from myself and Stefan * BUILD_DIR convenience/bugfix from Peter C * Memory leak fix from Shannon * SMM improvements (though still TCG only) from myself and Gerd, acked by mst # gpg: Signature made Fri Jun 5 18:45:20 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (62 commits) update Linux headers from kvm/next atomics: add explicit compiler fence in __atomic memory barriers ich9: implement SMI_LOCK q35: implement TSEG q35: add test for SMRAM.D_LCK q35: implement SMRAM.D_LCK q35: add config space wmask for SMRAM and ESMRAMC q35: fix ESMRAMC default q35: implement high SMRAM hw/i386: remove smram_update target-i386: use memory API to implement SMRAM hw/i386: add a separate region that tracks the SMRAME bit target-i386: create a separate AddressSpace for each CPU vl: run "late" notifiers immediately qom: add object_property_add_const_link vl: allow full-blown QemuOpts syntax for -global pflash_cfi01: add secure property pflash_cfi01: change to new-style MMIO accessors pflash_cfi01: change big-endian property to BIT type target-i386: wake up processors that receive an SMI ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-08machine: Drop use of DEFAULT_RAM_SIZE in help textAlexander Graf1-2/+1
As of commit 076b35b5a (machine: add default_ram_size to machine class) we no longer have a global default ram size, but instead machine specific defaults. When invoking qemu --help we don't know which machine you selected, so we can't tell the user the default RAM size in the help text anymore now. Thus I don't see an easy way to expose the default ram size to the user in the help text. The easiest option IMHO is to just drop this piece of information. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com> Acked-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Message-id: 1433495103-62084-1-git-send-email-agraf@suse.de [PMM: rewrapped long commit message lines] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-05vl: allow full-blown QemuOpts syntax for -globalPaolo Bonzini1-1/+6
-global does not work for drivers that have a dot in their name, such as cfi.pflash01. This is just a parsing limitation, because such globals can be declared easily inside a -readconfig file. To allow this usage, support the full QemuOpts key/value syntax for -global too, for example "-global driver=cfi.pflash01,property=secure,value=on". The two formats do not conflict, because the key/value syntax does not have a period before the first equal sign. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05icount: add sleep parameter to the icount option to set icount_sleep modeVictor CLEMENT1-2/+10
The 'sleep' parameter sets the icount_sleep mode, which is enabled by default. To disable it, add the 'sleep=no' parameter (or 'nosleep') to the qemu -icount option. Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr> Message-Id: <1432912446-9811-3-git-send-email-victor.clement@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-03Add -incoming help textDr. David Alan Gilbert1-1/+8
The help/man text for -incoming defer didn't make it through the merge of the code that implemented it. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-01vhost-user: add multi queue supportOuyang Changchun1-2/+3
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-29hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARMShannon Zhao1-1/+1
Introduce a preliminary framework in virt-acpi-build.c with the main ACPI build functions. It exposes the generated ACPI contents to guest over fw_cfg. The required ACPI v5.1 tables for ARM are: - RSDP: Initial table that points to XSDT - RSDT: Points to FADT GTDT MADT tables - FADT: Generic information about the machine - GTDT: Generic timer description table - MADT: Multiple APIC description table - DSDT: Holds all information about system devices/peripherals, pointed by FADT Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-27net: Change help text to list -netdev instead of -net by defaultThomas Huth1-32/+45
Looking at the output of "qemu-system-xxx -help", you easily get the impression that "-net" is the preferred way instead of "-netdev" to specify host network interface, since the "-net" option is omnipresent but the "-netdev" option is only listed as a one-liner at the end. This is ugly since "-net" is considered as legacy and even might be removed one day. Thus, this patch switches the output to explain the host network interfaces with the "-netdev" option instead, moving the old "-net" option into some few lines at the end. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1431701904-12230-1-git-send-email-thuth@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-04-30qemu-options: trivial spelling fix (messsage)Michael Tokarev1-1/+1
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-03-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-2/+1
Block patches for 2.3.0-rc1 # gpg: Signature made Thu Mar 19 15:03:26 2015 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: block: Fix blockdev-backup not to use funky error class raw-posix: Deprecate aio=threads fallback without O_DIRECT raw-posix: Deprecate host floppy passthrough Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19raw-posix: Deprecate host floppy passthroughMarkus Armbruster1-2/+1
Raise your hand if you have a physical floppy drive in a computer you've powered on in 2015. Okay, I see we got a few weirdos in the audience. That's okay, weirdos are welcome here. Kidding aside, media change detection doesn't fully work, isn't going to be fixed, and floppy passthrough just isn't earning its keep anymore. Deprecate block driver host_floppy now, so we can drop it after a grace period. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19smbios: add max speed comdline option for type-17 (meory device) structureGabriel L. Somlo1-2/+2
Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-16migration: Allow to suppress vmdesc submissionAlexander Graf1-1/+2
We now always send a JSON blob describing the migration file format as part of the migration stream. However, some tools built around QEMU have proven to stumble over this. This patch gives the user the chance to disable said self-describing part of the migration stream. To disable vmdesc submission, just add -machine suppress-vmdesc=on to your QEMU command line. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16s390x: CPACF: Handle key wrap machine optionsTony Krowiak1-1/+11
Check for the aes_key_wrap and dea_key_wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. This patch introduces two new machine options for indicating the state of AES/DEA key wrapping functions. This controls whether the guest will have access to the AES/DEA crypto functions. aes_key_wrap="on | off" is changed to aes-key-wrap="on | off" dea_key_wrap="on | off" is changed to dea-key-wrap="on | off" Check for the aes-key-wrap and dea-key-wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-10qemu-options: fix/document -incoming optionsMichael Tokarev1-3/+21
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10smbios: document cmdline options for smbios type 2-4, 17 structuresGabriel L. Somlo1-3/+29
Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-04qemu-options.hx: improve -m descriptionLuiz Capitulino1-5/+17
Add memory hotplug options to the command-line format. Also, add a complete command-line example and improve description. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com>
2015-01-22spice: add unix address supportMarc-André Lureau1-1/+2
Teach qemu to set up a Spice server with a UNIX socket using the following arguments -spice unix,addr=path. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-11Merge remote-tracking branch ↵Peter Maydell1-1/+11
'remotes/pmaydell/tags/pull-target-arm-20141211' into staging target-arm queue: * pass semihosting exit code out to system * more TrustZone support code (still not enabled yet) * allow user to direct semihosting to gdb or native explicitly rather than always auto-guessing the destination * fix memory leak in realview_init * fix coverity warning in hw/arm/boot * get state migration working for AArch64 CPUs * check errors in kvm_arm_reset_vcpu # gpg: Signature made Thu 11 Dec 2014 12:16:19 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20141211: (33 commits) target-arm: Check error conditions on kvm_arm_reset_vcpu target-arm: Support save/load for 64 bit CPUs target-arm/kvm: make reg sync code common between kvm32/64 arm_gic_kvm: Tell kernel about number of IRQs hw/arm/boot: fix uninitialized scalar variable warning reported by coverity hw/arm/realview.c: Fix memory leak in realview_init() target-arm: make MAIR0/1 banked target-arm: make c13 cp regs banked (FCSEIDR, ...) target-arm: make VBAR banked target-arm: make PAR banked target-arm: make IFAR/DFAR banked target-arm: make DFSR banked target-arm: make IFSR banked target-arm: make DACR banked target-arm: make TTBCR banked target-arm: make TTBR0/1 banked target-arm: make CSSELR banked target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI target-arm: add SCTLR_EL3 and make SCTLR banked target-arm: add MVBAR support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Add the "-semihosting-config" option.Liviu Ionescu1-1/+11
The usual semihosting behaviour is to process the system calls locally and return; unfortuantelly the initial implementation dinamically changed the target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb, is not implemented. The result was that during debug sessions the semihosting calls were discarded. This patch adds a configuration variable and an option to set it on the command line: -semihosting-config [enable=on|off,]target=native|gdb|auto This option enables semihosting and defines where the semihosting calls will be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which means 'gdb' during debug sessions and 'native' otherwise. Signed-off-by: Liviu Ionescu <ilg@livius.net> Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net [PMM: moved declaration and definition of semihosting_target to gdbstub.h and gdbstub.c to fix build failure on linux-user] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-10chardev: Add -qmp-prettyMax Reitz1-0/+8
Add a command line option for adding a QMP monitor using pretty JSON formatting. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-26-machine vmport=auto: Fix handling of VMWare ioport emulation for xenDon Slutz1-3/+5
c/s 9b23cfb76b3a5e9eb5cc899eaf2f46bc46d33ba4 or c/s b154537ad07598377ebf98252fb7d2aff127983b moved the testing of xen_enabled() from pc_init1() to pc_machine_initfn(). xen_enabled() does not return the correct value in pc_machine_initfn(). Changed vmport from a bool to an enum. Added the value "auto" to do the old way. Move check of xen_enabled() back to pc_init1(). Acked-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31-machine vmport=off: Allow disabling of VMWare ioport emulationDr. David Alan Gilbert1-0/+3
This is a pc & q35 only machine opt. VMWare apparently doesn't like running under QEMU due to our incomplete emulation of it's special IO Port. This adds a pc & q35 property to allow it to be turned off. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 09:07:01 +0000