summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-09-27net: limit allocation in nc_sendv_compatPeter Lieven1-2/+6
we only need to allocate enough memory to hold the packet. This might be less than NET_BUFSIZE. Additionally fail early if the packet is larger than NET_BUFSIZE. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27tap: Allow specifying a bridgeAlexey Kardashevskiy1-1/+3
The tap backend is already using qemu-bridge-helper to attach tap interface to a bridge but (unlike the bridge backend) it always uses the default bridge name - br0. This adds a "br" property support to the tap backend. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27filter-rewriter: rewrite tcp packet to keep secondary connectionZhang Chen3-2/+119
We will rewrite tcp packet secondary received and sent. When colo guest is a tcp server. Firstly, client start a tcp handshake. the packet's seq=client_seq, ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror) to secondary guest, secondary get it use filter-redirector. Then,primary guest response pkt (seq=primary_seq,ack=client_seq+1,flag=ACK|SYN). secondary guest response pkt (seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN). In here,we use filter-rewriter save the secondary_seq to it's tcp connection. Finally handshake,client send pkt (seq=client_seq+1,ack=primary_seq+1,flag=ACK). Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1 to secondary_seq+1, recalculate checksum. So the secondary tcp connection kept good. When we send/recv packet. client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH). filter-rewriter rewrite ack and send to secondary guest. primary guest response pkt (seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK) secondary guest response pkt (seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK) we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1. So tcp connection kept good. In code We use offset( = secondary_seq - primary_seq ) to rewrite seq or ack. handle_primary_tcp_pkt: tcp_pkt->th_ack += offset; handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset; Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27filter-rewriter: track connection and parse packetZhang Chen3-0/+65
We use net/colo.h to track connection and parse packet Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27filter-rewriter: introduce filter-rewriter initializationZhang Chen2-0/+106
Filter-rewriter is a part of COLO project. It will rewrite some of secondary packet to make secondary guest's tcp connection established successfully. In this module we will rewrite tcp packet's ack to the secondary from primary,and rewrite tcp packet's seq to the primary from secondary. usage: colo secondary: -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: add TCP, UDP, ICMP packet comparisonZhang Chen1-4/+143
We add TCP,UDP,ICMP packet comparison to replace IP packet comparison. This can increase the accuracy of the package comparison. Less checkpoint more efficiency. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: introduce packet comparison threadZhang Chen3-0/+237
If primary packet is same with secondary packet, we will send primary packet and drop secondary packet, otherwise notify COLO frame to do checkpoint. If primary packet comes but secondary packet does not, after REGULAR_PACKET_CHECK_MS milliseconds we set the primary packet as old_packet,then do a checkpoint. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: track connection and enqueue packetZhang Chen3-10/+190
In this patch we use kernel jhash table to track connection, and then enqueue net packet like this: + CompareState ++ | | +---------------+ +---------------+ +---------------+ |conn list +--->conn +--------->conn | +---------------+ +---------------+ +---------------+ | | | | | | +---------------+ +---v----+ +---v----+ +---v----+ +---v----+ |primary | |secondary |primary | |secondary |packet | |packet + |packet | |packet + +--------+ +--------+ +--------+ +--------+ | | | | +---v----+ +---v----+ +---v----+ +---v----+ |primary | |secondary |primary | |secondary |packet | |packet + |packet | |packet + +--------+ +--------+ +--------+ +--------+ | | | | +---v----+ +---v----+ +---v----+ +---v----+ |primary | |secondary |primary | |secondary |packet | |packet + |packet | |packet + +--------+ +--------+ +--------+ +--------+ We use conn_list to record connection info. When we want to enqueue a packet, firstly get the connection from connection_track_table. then push the packet to g_queue(pri/sec) in it's own conn. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27Jhash: add linux kernel jhashtable in qemuZhang Chen1-0/+1
Jhash will be used by colo-compare and filter-rewriter to save and lookup net connection info Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27net/colo.c: add colo.c to define and handle packetZhang Chen4-4/+234
The net/colo.c is used by colo-compare and filter-rewriter. this can share common data structure like net packet, and other functions. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: introduce colo compare initializationZhang Chen2-0/+271
This a COLO net ascii figure: Primary qemu Secondary qemu +--------------------------------------------------------------+ +----------------------------------------------------------------+ | +----------------------------------------------------------+ | | +-----------------------------------------------------------+ | | | | | | | | | | | guest | | | | guest | | | | | | | | | | | +-------^--------------------------+-----------------------+ | | +---------------------+--------+----------------------------+ | | | | | | ^ | | | | | | | | | | | | +------------------------------------------------------+ | | | | |netfilter| | | | | | netfilter | | | | +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | | | | | | | out | | | | | | filter excute order | | | | | | +-----------------------------+ | | | | | | +-------------------> | | | | | | | | | | | | | | | | TCP | | | | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | | | | | | | | | |in | |in | | | | | | | | | | | | | | | | filter | | filter | | filter +------> colo <------+ +--------> filter +--> adjust | adjust +--> filter | | | | | | mirror | |redirector| |redirector| | | compare | | | | | | redirector | | ack | seq | | redirector | | | | | | | | | | | | | | | | | | | | | | | | | | | | | +----^-----+ +----+-----+ +----------+ | +---------+ | | | | +------------+ +--------+--------------+ +---+--------+ | | | | | tx | rx rx | | | | | tx all | rx | | | | | | | | | | +-----------------------------------------------------------+ | | | | +--------------+ | | | | | | | | | filter excute order | | | | | | | | | | +----------------> | | | +--------------------------------------------------------+ | | +-----------------------------------------+ | | | | | | | | | +--------------------------------------------------------------+ +----------------------------------------------------------------+ |guest receive | guest send | | +--------+----------------------------v------------------------+ | | NOTE: filter direction is rx/tx/all | tap | rx:receive packets sent to the netdev | | tx:receive packets sent by the netdev +--------------------------------------------------------------+ In COLO-compare, we do packet comparing job. Packets coming from the primary char indev will be sent to outdev. Packets coming from the secondary char dev will be dropped after comparing. colo-comapre need two input chardev and one output chardev: primary_in=chardev1-id (source: primary send packet) secondary_in=chardev2-id (source: secondary send packet) outdev=chardev3-id usage: primary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait -chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait -chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait -chardev socket,id=compare0-0,host=3.3.3.3,port=9001 -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait -chardev socket,id=compare_out0,host=3.3.3.3,port=9005 -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0 secondary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=red0,host=3.3.3.3,port=9003 -chardev socket,id=red1,host=3.3.3.3,port=9004 -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27net: hmp_host_net_remove: Del the -net option of the removed host_netShmulik Ladkani1-0/+1
Upon hmp_host_net_remove(), the appropriate -net client is deleted (according to the given vlan_id and device id), as well as the corresponsing hub port. However, the relevant '-net' option that was added by former hmp_host_net_add() call is still present in "net" options group. This makes the following legit HMP sequence erroneous: (qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1 (qemu) host_net_remove 1 n1 (qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1 Duplicate ID 'n1' for net Fix, by deleting the stored '-net' option associated with the given device id. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-14Change net/socket.c to use socket_*() functionsMarc-André Lureau1-56/+71
Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. The task was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13qtail: clean up direct access to tqe_prev fieldIgor Mammedov1-1/+1
instead of accessing tqe_prev field dircetly outside of queue.h use macros to check if element is in list and make sure that afer element is removed from list tqe_prev field could be used to do the same check. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-30Revert "Change net/socket.c to use socket_*() functions"Paolo Bonzini1-27/+28
Since commit 7e8449594c929, the socket connect code is blocking, because calling socket_connect() without callback is blocking. This reverts the commit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-22slirp: fix segv when init failedMarc-André Lureau1-1/+3
Since commit f6c2e66ae8c8a, slirp uses an exit notifier to call slirp_smb_cleanup. However, if init() failed, the notifier isn't added, and removing it will fail: ==18447== Invalid write of size 8 ==18447== at 0x7EF2B5: notifier_remove (notify.c:32) ==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661) ==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134) ==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338) ==18447== by 0x69445B: qemu_del_net_client (net.c:401) ==18447== by 0x6A2B81: net_slirp_init (slirp.c:366) ==18447== by 0x6A4241: net_init_slirp (slirp.c:865) ==18447== by 0x695C6D: net_client_init1 (net.c:1051) ==18447== by 0x695F6E: net_client_init (net.c:1108) ==18447== by 0x696DBA: net_init_netdev (net.c:1498) ==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116) ==18447== by 0x696E60: net_init_clients (net.c:1516) ==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-18net/net: properly handle multiple packets in net_fill_rstate()Zhang Chen1-4/+4
When network is busy, we will receive multiple packets at one time. In that situation, we should keep trying to do the receiving instead of finalizing only the first packet. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier1-1/+1
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-29vhost-user: wait until backend init is completedMarc-André Lureau1-2/+16
The chardev waits for an initial connection before starting qemu, and vhost-user should wait for the backend negotiation to be completed before starting qemu too. vhost-user is started in the net_vhost_user_event callback, which is synchronously called after the socket is connected. Use a VhostUserState.started flag to indicate vhost-user init completed successfully and qemu can be started. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: add get_vhost_net() assertionsMarc-André Lureau1-0/+2
Add a few assertions to be more explicit about the runtime behaviour after the previous patch: get_vhost_net() is non-null after net_vhost_user_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: keep vhost_net after a disconnectionMarc-André Lureau2-17/+20
Many code paths assume get_vhost_net() returns non-null. Keep VhostUserState.vhost_net after a successful vhost_net_init(), instead of freeing it in vhost_net_cleanup(). VhostUserState.vhost_net is thus freed before after being recreated or on final vhost_user_cleanup() and there is no need to save the acked features. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: disconnect on HUPMarc-André Lureau1-5/+1
In some cases, qemu_chr_fe_read_all() on HUP event doesn't raise CHR_EVENT_CLOSED because the read/recv function returns -1 on disconnected peers (for example with tch_chr_recv, an ECONNRESET errno overwritten as EIO). It is simpler to explicitely disconnect on HUP, rising CHR_EVENT_CLOSED if it wasn't disconnected already. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: minor simplificationMarc-André Lureau1-2/+1
Shorten the code and make it more clear by using the specialized function g_str_has_prefix(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into ↵Peter Maydell13-133/+174
staging QAPI patches for 2016-07-19 # gpg: Signature made Tue 19 Jul 2016 19:35:27 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2016-07-19: net: Use correct type for bool flag qapi: Change Netdev into a flat union block: Simplify drive-mirror block: Simplify block_set_io_throttle qapi: Implement boxed types for commands/events qapi: Plumb in 'boxed' to qapi generator lower levels qapi-event: Simplify visit of non-implicit data qapi: Drop useless gen_err_check() qapi: Add type.is_empty() helper qapi: Hide tag_name data member of variants qapi: Special case c_name() for empty type qapi: Require all branches of flat union enum to be covered net: use Netdev instead of NetClientOptions in client init qapi: change QmpInputVisitor to QSLIST qapi: change QmpOutputVisitor to QSLIST Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19net: Use correct type for bool flagEric Blake1-6/+6
is_netdev is only used as a bool, so make it one. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19qapi: Change Netdev into a flat unionEric Blake12-103/+140
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19net: use Netdev instead of NetClientOptions in client initKővágó, Zoltán12-49/+53
This way we no longer need NetClientOptions and can convert Netdev into a flat union. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com> [rework net_client_init1() to pass Netdev by copying from NetdevLegacy, rather than merging the two types - which means that we still need NetClientOptions after all. Rebase to qapi changes. The bulk of the patch is mechanical, replacing 'opts' by 'netdev->opts', while net_client_init1() takes care of converting between legacy and modern types.] Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-18tap: fix memory leak on failure to create a multiqueue tap devicePaolo Bonzini1-6/+16
Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18net: fix incorrect argument to iov_to_bufPaolo Bonzini1-2/+2
Coverity reports a "suspicious sizeof" which is indeed wrong. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18net: fix incorrect access to pointerPaolo Bonzini1-1/+1
This is not dereferencing the pointer, and instead checking only the value of the pointer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-7/+31
* SCSI scanner support * fixes to qemu-char and net exit * FreeBSD fixes * Other small bugfixes # gpg: Signature made Wed 13 Jul 2016 12:30:11 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: hostmem: detect host backend memory is being used properly hostmem: fix QEMU crash by 'info memdev' char: do not use atexit cleanup handler net: do not use atexit for cleanup slirp: use exit notifier for slirp_smb_cleanup tap: use an exit notifier to call down_script util: Fix MIN_NON_ZERO qemu-sockets: use qapi_free_SocketAddress in cleanup disas: avoid including everything in headers compiled from C++ json-streamer: fix double-free on exiting during a parse main-loop: check return value before using pointer Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD. scsi-bus: Use longer sense buffer with scanners scsi-bus: Add SCSI scanner support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-13slirp: use exit notifier for slirp_smb_cleanupPaolo Bonzini1-0/+11
We would like to move back net_cleanup() at the end of main function, like it used to be until f30dbae63a46f23116715dff8d130c, but minimum cleanup is needed regardless at exit() time for slirp's SMB functionality. Use an exit notifier to call slirp_smb_cleanup. If net_cleanup() is called first, then remove the exit notifier as it will become a dangling pointer otherwise. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13tap: use an exit notifier to call down_scriptMarc-André Lureau1-7/+20
We would like to move back net_cleanup() at the end of main function, like it used to be until f30dbae63a46f23116715dff8d130c, but minimum tap cleanup is necessary regarless at exit() time. Use an exit notifier to call TAP down_script. If net_cleanup() is called first, then remove the exit notifier as it will become a dangling pointer otherwise. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster1-1/+1
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster1-3/+3
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-07tap: vhost busy polling supportJason Wang2-1/+7
This patch add the capability of basic vhost net busy polling which is supported by recent kernel. User could configure the maximum number of us that could be spent on busy polling through a new property of tap "poll-us". Cc: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake1-6/+5
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06string-output-visitor: Favor new visit_free() functionEric Blake1-1/+1
Now that we have a polymorphic visit_free(), we no longer need string_output_visitor_cleanup(); however, we still need to expose the subtype for string_output_get_string(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06opts-visitor: Favor new visit_free() functionEric Blake1-3/+2
Now that we have a polymorphic visit_free(), we no longer need opts_visitor_cleanup(); which in turn means we no longer need to return a subtype from opts_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+6
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29vhost-user: disable chardev handlers on closePaolo Bonzini1-0/+5
This otherwise causes a use-after-free if network backend cleanup is performed before character device cleanup. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29char: change qemu_chr_fe_add_watch to return unsignedPaolo Bonzini1-1/+1
g_source_attach can return any value between 1 and UINT_MAX if you let QEMU run long enough. However, qemu_chr_fe_add_watch can also return a negative errno value when the device is disconnected or does not support chr_add_watch. Change it to return zero to avoid overloading these values. Fix the cadence_uart which asserts in this case (easily obtained with "-serial pty"). Tested-by: Bret Ketchum <bcketchum@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-28Change net/socket.c to use socket_*() functionsAshijeet Acharya1-28/+27
Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. Thetask was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-28net: fix qemu_announce_self not emitting packetsPeter Lieven1-1/+1
commit fefe2a78 accidently dropped the code path for injecting raw packets. This feature is needed for sending gratuitous ARPs after an incoming migration has completed. The result is increased network downtime for vservers where the network card is not virtio-net with the VIRTIO_NET_F_GUEST_ANNOUNCE feature. Fixes: fefe2a78abde932e0f340b21bded2c86def1d242 Cc: qemu-stable@nongnu.org Cc: hongyang.yang@easystack.cn Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-20trace: split out trace events for net/ directoryDaniel P. Berrange1-0/+4
Move all trace-events for files in the net/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-17Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+31
pc, pci, virtio: new features, cleanups, fixes Beginning of reconnect support for vhost-user. Misc cleanups and fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 17 Jun 2016 01:28:39 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: MAINTAINERS: add Marcel to PCI msi_init: change return value to 0 on success fix some coding style problems pci core: assert ENOSPC when add capability test: start vhost-user reconnect test tests: append i386 tests vhost-net: save & restore vring enable state vhost-net: save & restore vhost-user acked features vhost-net: do not crash if backend is not present vhost-user: disconnect on start failure qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd tests/vhost-user-bridge: workaround stale vring base tests/vhost-user-bridge: add client mode vhost-user: add ability to know vhost-user backend disconnection pci: fix pci_requester_id() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: tests/Makefile.include
2016-06-17vhost-net: save & restore vhost-user acked featuresMarc-André Lureau1-0/+10
The initial vhost-user connection sets the features to be negotiated with the driver. Renegotiation isn't possible without device reset. To handle reconnection of vhost-user backend, ensure the same set of features are provided, and reuse already acked features. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17vhost-user: disconnect on start failureMarc-André Lureau1-1/+2
If the backend failed to start (for example feature negociation failed), do not exit, but disconnect the char device instead. Slightly more robust for reconnect case. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17vhost-user: add ability to know vhost-user backend disconnectionTetsuya Mukawa1-0/+19
Current QEMU cannot detect vhost-user backend disconnection. The patch adds ability to know it. To know disconnection, add watcher to detect G_IO_HUP event. When G_IO_HUP event is detected, the disconnected socket will be read to cause a CHR_EVENT_CLOSED. Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini1-1/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 13:01:31 +0000