summaryrefslogtreecommitdiff
path: root/net.h
AgeCommit message (Collapse)AuthorFilesLines
2009-10-06Don't exit() in config_error()Markus Armbruster1-2/+2
Propagating errors up the call chain is tedious. In startup code, we can take a shortcut: terminate the program. This is wrong elsewhere, the monitor in particular. config_error() tries to cater for both customers: it terminates the program unless its mon parameter tells it it's working for the monitor. Its users need to return status anyway (unless passing a null mon argument, which none do), which their users need to check. So this automatic exit buys us exactly nothing useful. Only the dangerous delusion that we can get away without returning status. Some of its users fell for that. Their callers continue executing after failure when working for the monitor. This bites monitor command host_net_add in two places: * net_slirp_init() continues after slirp_hostfwd(), slirp_guestfwd(), or slirp_smb() failed, and may end up reporting success. This happens for "host_net_add user guestfwd=foo": it complains about the invalid guest forwarding rule, then happily creates the user network without guest forwarding. * net_client_init() can't detect slirp_guestfwd() failure, and gets fooled by net_slirp_init() lying about success. Suppresses its "Could not initialize device" message. Add the missing error reporting, make sure errors are checked, and drop the exit() from config_error(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Make NICInfo string fields non-constMark McLoughlin1-4/+4
We now only assign strdup()ed strings to these fields, never static strings. aliguori: fix build for ppc_prep and mips_jazz Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster1-2/+3
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Make it obvious that pci_nic_init() can't failMarkus Armbruster1-2/+2
Before this patch, pci_nic_init() returns NULL when it can't find the model in pci_nic_models[]. Except this can't happen, because qemu_check_nic_model_list() just searched for model in pci_nic_models[], and terminated the program on failure. Repeating the search here is pointless. Instead, change qemu_check_nic_model_list() to return the model's array index. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl1-3/+3
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-04monitor: Port handler_3 to use QDictLuiz Capitulino1-4/+2
This commit ports command handlers that receive three arguments to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04monitor: Port handler_2 to use QDictLuiz Capitulino1-3/+4
This commit ports command handlers that receive two arguments to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04net: Fix send queue orderingJan Kiszka1-2/+3
Ensure that packets enqueued for delayed delivery are dequeued in FIFO order. At least one simplistic guest TCP/IP stack became unhappy due to sporadically reordered packet streams. At this chance, switch the send queue implementation to TAILQ. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10net: Fix do_set_link() return typeLuiz Capitulino1-1/+1
do_set_link() returns int, but Monitor handler functions should always return void. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-16qdev: add id= support for pci nics.Gerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin1-0/+1
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Make hostfwd_add/remove multi-instance-awareJan Kiszka1-2/+4
Extend the syntax of hostfwd_add/remove to optionally take a tuple of VLAN ID and slirp stack name. If those are omitted, the commands will continue to work on the first registered slirp stack. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29net: Provide VLAN client lookup helperJan Kiszka1-1/+1
Introduce qemu_find_vlan_client_by_name for VLANClientState lookup based on VLAN ID and client name. This is useful for monitor commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Kill slirp_is_initedJan Kiszka1-1/+0
Avoid the need for slirp_is_inited by refactoring the protected slirp_select_* functions. This also avoids the clearing of all fd sets on select errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Add info usernet for dumping connection statesJan Kiszka1-0/+2
Break out sockstats from the slirp statistics and present them under the new info category "usernet". This patch also improves the current output /wrt proper reporting connection source and destination. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Bind support for host forwarding rulesJan Kiszka1-1/+1
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework monitor commands for host forwardingJan Kiszka1-1/+3
Improve the monitor interface for adding and removing host forwarding rules by splitting it up in two commands and rename them to hostfwd_add and hostfwd_remove. Also split up the paths taken for legacy -redir support and the monitor add command as the latter will be extended later on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Move smb, redir, tftp and bootp parameters and -net channelJan Kiszka1-0/+3
So far a couple of slirp-related parameters were expressed via stand-alone command line options. This it inconsistent and unintuitive. Moreover, it prevents both dynamically reconfigured (host_net_add/ delete) and multi-instance slirp. This patch refactors the configuration by turning -smb, -redir, -tftp and -bootp as well as -net channel into options of "-net user". The old stand-alone command line options are still processed, but no longer advertised. This allows smooth migration of management applications to to the new syntax and also the extension of that syntax later in this series. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-24qemu/net: flag to control the number of vectors a nic hasMichael S. Tsirkin1-0/+4
Add an option to specify the number of MSI-X vectors for PCI NIC cards. This can also be used to disable MSI-X, for compatibility with old qemu. This option currently only affects virtio cards. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22net: add packet length to NetPacketSent callbackMark McLoughlin1-1/+1
virtio-net needs this - for the same purpose that it currently uses the return value from qemu_sendv_packet(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22net: add qemu_purge_queued_packets()Mark McLoughlin1-0/+1
If net client sends packets asynchronously, it needs to purge its queued packets in cleanup() so as to prevent sent callbacks being invoked with a freed client. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster1-0/+1
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Make nic option rom loading less painful.Glauber Costa1-0/+2
The code how it is today, is totally painful to read and keep. To begin with, the code is duplicated with the option rom loading code that linux_boot and vga are already using. This patch introduces a "bootable" state in NICInfo structure, that we can use to keep track of whether or not a given nic should be bootable, avoiding the introduction of yet another global state. With that in hands, we move the code in vl.c to hw/pc.c, and use the already existing infra structure to load those option roms. Error checking code suggested by Mark McLoughlin Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add qemu_send_packet_async()Mark McLoughlin1-0/+8
Add a qemu_send_packet() variant which will queue up the packet if it cannot be sent when all client queues are full. It later invokes the supplied callback when the packet has been sent. If qemu_send_packet_async() returns zero, the caller is expected to not send any more packets until the queued packet has been sent. Packets are queued iff a receive() handler returns zero (indicating queue full) and the caller has provided a sent notification callback (indicating it will stop and start its own queue). We need the packet sending API to support queueing because: - a sending client should process all available packets in one go (e.g. virtio-net emptying its tx ring) - a receiving client may not be able to handle the packet (e.g. -EAGAIN from write() to tapfd) - the sending client could detect this condition in advance (e.g. by select() for writable on tapfd) - that's too much overhead (e.g. a select() call per packet) - therefore the sending client must handle the condition by dropping the packet or queueing it - dropping packets is poor form; we should queue. However, we don't want queueing to be completely transparent. We want the sending client to stop sending packets as soon as a packet is queued. This allows the sending client to be throttled by the receiver. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin1-1/+1
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin1-3/+3
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin1-11/+12
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin1-2/+4
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: Improve parameter error reportingJan Kiszka1-1/+1
As host network devices can also be instantiated via the monitor, errors should then be reported to the related monitor instead of stderr. This requires larger refactoring, so this patch starts small with introducing a helper to catch both cases and convert net_client_init as well as net_slirp_redir. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-27User Networking: Enable removal of redirectionsAlexander Graf1-1/+1
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14PCI network qdev conversionPaul Brook1-0/+7
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-21slirp: Enhance host-guest redirection setup (Jan Kiszka)aliguori1-1/+1
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Untangle nested qemu_send_packet (Jan Kiszka)aliguori1-0/+11
Queue packets that are send during an ongoing packet delivery. This ensures that packets will always arrive in their logical order at each client of a VLAN. Currently, slirp generates such immediate relies, and e.g. packet-sniffing clients on the same VLAN may get confused. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori1-0/+3
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori1-4/+4
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)aliguori1-0/+2
Add monitor command to hot-add PCI devices (nic and storage). Syntax is: pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params It returns the domain, bus and slot for the newly added device on success. It is possible to attach a disk to a device after PCI initialization via the drive_add command. If so, a manual scan of the SCSI bus on the guest is necessary. Save QEMUMachine necessary for drive_init. Add monitor command to hot-remove devices, remove device data on _EJ0 notification. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: add net_client_uninit / qemu_find_vlan_client (Marcelo Tosatti)aliguori1-0/+2
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6600 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: dynamic nic info index allocation (Marcelo Tosatti)aliguori1-0/+1
Dynamically allocate nic info index, so to reuse indexes when devices are removed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6595 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)aliguori1-0/+1
Change the PCI network drivers init functions to return the PCIDev, to inform which slot has been hot-plugged. Also record PCIDevice structure on NICInfo to locate for release on hot-removal. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Add qemu_check_nic_model() and qemu_check_nic_model_list() (Mark McLoughlin)aliguori1-0/+3
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6281 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Allow devices be notified of link status change (Mark McLoughlin)aliguori1-0/+3
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6248 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add 'set_link' monitor command (Mark McLoughlin)aliguori1-0/+2
Add a monitor command to setting a given network device's link status to 'up' or 'down'. Allows simulation of network cable disconnect. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6247 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori1-0/+2
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori1-0/+1
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Assign a name to each VLAN client (Mark McLoughlin)aliguori1-0/+1
Automatically assign a name to each vlan client based on its model, e.g. e1000.0, tap.3 or vde.1. This name is intended to be used by the forthcoming 'set_link' monitor command. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6217 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori1-0/+2
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18consolidate definition for tap script and smb supportaurel321-0/+8
Since the introduction of net.c in r5581 there had been 2 places where the location of the TAP helper scripts and SMB daemon are defined. The following patch move those definitions to net.h so they are accessible for net.c and vl.c but defined only once (Carlo Marcelo Arenas Belon) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6093 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17virtio-net supportaliguori1-0/+7
This adds virtio-net support. This is based on the virtio-net driver that exists in kvm-userspace. This also adds a new qemu_sendv_packet which virtio-net requires. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6073 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Move network redirection code out of vl.c and into net.caliguori1-0/+9
Mostly code motion. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5581 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-28Add a "null" bluetooth HCI and a header file for bluetooth.balrog1-0/+14
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5342 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 18:06:11 +0000