summaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2010-03-17Wrong error message in block_passwd commandShahar Havivi1-1/+6
Signed-off-by: Shahar Havivi <shaharh@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16monitor: New argument type 'O'Markus Armbruster1-4/+50
In the human monitor, it declares a single optional argument to be parsed according to the QemuOptsList given by its name. In QMP, it declares an optional argument for each member of the QemuOptsList. Restriction: only lists with empty desc are supported for now. Good enough for the job at hand. We'll lift the restriction when we need that.
2010-03-16error: Let converted handlers print in human monitorMarkus Armbruster1-43/+37
While fully converted handlers are not supposed to print anything when running in a QMP monitor, they are free to print in a human monitor. For instance, device_add (not yet converted) prints help, and will continue to do so after conversion. Moreover, utility functions converted to QError should remain usable from unconverted handlers. Two problems: * handler_audit() complains when a converted handler prints. Limit that to QMP monitors. * With QMP, handlers need to pass the error object by way of monitor_set_error(). However, we do that both for QMP and for the human monitor. The human monitor prints the error object after the handler returns. If the handler prints anything else, that output "overtakes" the error message. Limit use of monitor_set_error() to QMP monitors. Update handler_audit() accordingly.
2010-03-16monitor: New monitor_cur_is_qmp()Markus Armbruster1-0/+6
2010-03-16error: Rename qemu_error_new() to qerror_report()Markus Armbruster1-40/+40
2010-03-16error: Simplify error sink setupMarkus Armbruster1-6/+0
qemu_error_sink can either point to a monitor or a file. In practice, it always points to the current monitor if we have one, else to stderr. Simply route errors to the current monitor or else to stderr, and remove qemu_error_sink along with the functions to control it. Actually, the old code switches the sink slightly later, in handle_user_command() and handle_qmp_command(), than it gets switched now, implicitly, by setting the current monitor in monitor_read() and monitor_control_read(). Likewise, it switches back slightly earlier (same places). Doesn't make a difference, because there are no calls of qemu_error() in between.
2010-03-16error: Move qemu_error() & friends from monitor.c to own fileMarkus Armbruster1-89/+0
They're about reporting errors, not about the monitor.
2010-03-16monitor: Factor monitor_set_error() out of qemu_error_internal()Markus Armbruster1-8/+13
This separates the monitor part from the QError part.
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster1-3/+4
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-03-16savevm: Fix -loadvm to report errors to stderr, not the monitorMarkus Armbruster1-1/+1
A monitor may not even exist. Change load_vmstate() to use qemu_error() instead of monitor_printf(). Parameter mon is now unused, remove it.
2010-03-09QMP: Introduce WATCHDOG eventLuiz Capitulino1-0/+3
It's emitted whenever the watchdog device's timer expires. The action taken is provided in the 'data' member. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08QMP: Introduce RTC_CHANGE eventLuiz Capitulino1-0/+3
Emitted whenever the RTC time changes. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08QMP: Drop DEBUG eventLuiz Capitulino1-3/+0
This event has been introduced in the first round of QMP commits, turns out that it's based on the usage of the EXCP_DEBUG macro, which has discussable semantics when exposed through QMP. As libvirt doesn't use this, let's just drop it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08Fix hanging user monitor when using balloon commandAdam Litke1-1/+1
This patch application failed. My patch adds a cb() call in do_balloon(), but the change in git has added the cb() call to do_info_balloon(). That is causing qemu segfaults. Applying the following should correct the damage. Thanks. Fix for commit: 5c366a8a3d7ac71beda8499caa815cb3ea95eb58 The cb() call is needed in do_balloon(), not do_info_balloon(). Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-23fix 'i' format handling in memory dumpGleb Natapov1-2/+0
It was broken by 09b9418c6d0. (!env && !is_physical) != (!is_physical) when env is true. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Fix hanging user monitor when using balloon commandAdam Litke1-0/+1
Arghh... Adding missing S-O-B Hi Anthony. I wonder if there was a problem when importing my async command handler patchset. Since the 'balloon' command completes immediately, it must call the completion callback before returning. That call was missing but is added by the patch below. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Report more than one error in handlersLuiz Capitulino1-1/+2
Handlers can generate only one error in a call, we let the programmer know if they brake this rule and clients will only get the first generated error. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Debug stray prints the right wayLuiz Capitulino1-1/+41
QObject Monitor handlers should not call any Monitor print function: they should only build objects, printing is done by common code. Current QMP code will ignore such calls, as we can't send garbage to clients, additionally it will also emit an undefined error on the assumption that print calls usually report errors. However, the right way to deal with this is to rely on a return code. This has been fixed by other commit already. Now, this commit drops the error from monitor_vprintf() and adds a better debugging mechanism for those 'stray' prints: we count them if debug is enabled and let the developer know if a QObject handler is trying to print anything. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Audit handler returnLuiz Capitulino1-1/+31
This commit verifies the following two rules specified by Markus Armbruster: 1. If the handler returns failure, it must have passed an error. If it didn't, it's broken. Report an internal error to the client, and report the bug to the programmer. 2. If the handler returns success, it must not have passed an error. If it did, it's broken. Report the error to the client, and report the bug to the programmer. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Drop the print disabling mechanismLuiz Capitulino1-9/+9
We can ignore calls to monitor_vprintf() in QMP mode and use monitor_puts() directly in monitor_json_emitter(). This allows us to drop this ugly hack. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Debugging supportLuiz Capitulino1-0/+8
Add configure options (--enable-debug-mon and --disable-debug-mon) plus the MON_DEBUG() macro. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Rename cmd_new_ret()Luiz Capitulino1-7/+2
Now that all handlers are converted to cmd_new_ret(), we can rename it back to cmd_new(). But now it returns a value. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_change() to cmd_new_ret()Luiz Capitulino1-22/+38
Not that trivial as the call chain also has to be modified. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_info() to cmd_new_ret()Luiz Capitulino1-3/+5
Note that this function only fails in QMP, in the user Monitor it prints the help text instead. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_physical_memory_save() to cmd_new_ret()Luiz Capitulino1-2/+7
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_memory_save() to cmd_new_ret()Luiz Capitulino1-2/+7
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_closefd() to cmd_new_ret()Luiz Capitulino1-2/+3
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_getfd() to cmd_new_ret()Luiz Capitulino1-5/+6
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_block_set_passwd() to cmd_new_ret()Luiz Capitulino1-2/+5
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_cpu_set() to cmd_new_ret()Luiz Capitulino1-2/+5
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_eject() to cmd_new_ret()Luiz Capitulino1-3/+3
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert do_cont() to cmd_new_ret()Luiz Capitulino1-2/+6
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert simple handlers to cmd_new_ret()Luiz Capitulino1-8/+14
The following handlers always succeed and hence can be converted to cmd_new_ret() in the same commit. - do_stop() - do_quit() - do_system_reset() - do_system_powerdown() - do_migrate_cancel() - do_qmp_capabilities() - do_migrate_set_speed() - do_migrate_set_downtime() Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Introduce cmd_new_ret()Luiz Capitulino1-1/+6
In order to implement the new error handling and debugging mechanism for command handlers, we need to change the cmd_new() callback to return a value. This commit introduces cmd_new_ret(), which returns a value and will be used only temporarily to handle the transition from cmd_new(). That is, as soon as all command handlers are ported to cmd_new_ret(), it will be renamed back to cmd_new() and the new error handling and debugging mechanism will be added on top of it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QMP: Don't leak on connection closeLuiz Capitulino1-4/+8
QMP's chardev event callback doesn't call json_message_parser_destroy() on CHR_EVENT_CLOSED. As the call to json_message_parser_init() on CHR_EVENT_OPENED allocates memory, we'are leaking on close. Fix that by just calling json_message_parser_destroy() on CHR_EVENT_CLOSED. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QError: Don't abort on multiple faultsLuiz Capitulino1-2/+7
Ideally, Monitor code should report an error only once and return the error information up the call chain. To assure that this happens as expected and that no error is lost, we have an assert() in qemu_error_internal(). However, we still have not fully converted handlers using monitor_printf() to report errors. As there can be multiple monitor_printf() calls on an error, the assertion is easily triggered when debugging is enabled; and we will get a memory leak if it's not. The solution to this problem is to allow multiple faults by only reporting the first one, and to release the additional error objects. A better mechanism to report multiple errors to programmers is underway. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Monitor: remove unneeded checksLuiz Capitulino1-5/+0
It's not needed to check the return of qobject_from_jsonf() anymore, as an assert() has been added there. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QMP: Enforce capability negotiation rulesLuiz Capitulino1-1/+17
With this commit QMP will be started in Capabilities Negotiation mode, where the only command allowed to run is 'qmp_capabilities'. All other commands will return CommandNotFound error. Asynchronous messages are not delivered either. When 'qmp_capabilities' is successfully executed QMP enters in Command mode, where all commands (except 'qmp_capabilities') are allowed to run and asynchronous messages are delivered. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QMP: Introduce the qmp_capabilities commandLuiz Capitulino1-0/+11
This command will be used to enable QMP capabilities advertised by the capabilities array. Note that it will be mandatory to issue this command in order to make QMP functional (although this behavior is not being enforced by this commit). Also, as we don't have any capabilities yet, the new command doesn't accept any arguments. I will postpone the decision for a format for this until we get our first capability. Finally, this command is visible from the user Monitor too, in the meaning that you can execute it but it won't do anything. Making it only visible in QMP is beyond this series' goal, as it requires changes in unrelated places. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QMP: Add QEMU's version to the greeting messageLuiz Capitulino1-1/+9
With capability negotiation support clients will only have a chance to check QEMU's version (ie. issue 'query-version') after the negotiation procedure is done. It might be useful to clients to check QEMU's version before negotiating features, though. To allow that, this commit adds the QEMU's version object to the greeting message. Not really sure this is needed, but doesn't hurt anyway. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10QMP: BLOCK_IO_ERROR event handlingLuiz Capitulino1-0/+3
This commit adds the basic definitions for the BLOCK_IO_ERROR event, but actual event emission will be introduced by the next commits. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Use QERR_INVALID_PARAMETER instead of QERR_INVALID_CPU_INDEXMarkus Armbruster1-1/+1
This changes the error message from "Invalid CPU index" to "Invalid parameter index" in the human monitor. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: New argument type 'T'Markus Armbruster1-1/+16
This is a double value with optional suffixes ms, us, ns. We'll need this to get migrate_set_downtime() QMP-ready. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: New argument type 'b'Markus Armbruster1-0/+64
This is a double value with optional suffixes G, g, M, m, K, k. We'll need this to get migrate_set_speed() QMP-ready. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03monitor: Document argument type 'M'Markus Armbruster1-0/+2
Was forgotten in commit b6e098d7. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-28Monitor: Fix command execution regressionLuiz Capitulino1-1/+5
Function is_async_return() added by commit 940cc30d0d4 assumes that 'data', which is returned by handlers, is always a QDict. This is not true, as QLists can also be returned, in this case we'll get a segfault. Fix that by checking if 'data' is a QDict. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-26virtio: Add memory statistics reporting to the balloon driverAdam Litke1-37/+61
When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26New API for asynchronous monitor commandsAdam Litke1-4/+109
Qemu has a number of commands that can operate asynchronously (savevm, migrate, etc) and it will be getting more. For these commands, the user monitor needs to be suspended, but QMP monitors could continue to to accept other commands. This patch introduces a new command API that isolates the details of handling different monitor types from the actual command execution. A monitor command can use this API by implementing the mhandler.cmd_async handler (or info_async if appropriate). This function is responsible for submitting the command and does not return any data although it may raise errors. When the command completes, the QMPCompletion callback should be invoked with its opaque data and the command result. The process for submitting and completing an asynchronous command is different for QMP and user monitors. A user monitor must be suspended at submit time and resumed at completion time. The user_print() function must be passed to the QMPCompletion callback so the result can be displayed properly. QMP monitors are simpler. No submit time setup is required. When the command completes, monitor_protocol_emitter() writes the result in JSON format. This API can also be used to implement synchronous commands. In this case, the cmd_async handler should immediately call the QMPCompletion callback. It is my hope that this new interface will work for all commands, leading to a drastically simplified monitor.c once all commands are ported. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26PCI: Convert pci_info() to QObjectLuiz Capitulino1-1/+2
The returned QObject is a QList of all buses. Each bus is represented by a QDict, which has a key with a QList of all PCI devices attached to it. Each device is represented by a QDict. As has happended to other complex conversions, it's hard to split this commit as part of it are new functions which are called by each other. IMPORTANT: support for printing PCI bridge attached devices is NOT part of this commit, it's going to be added by the next commit, as it's untested. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26monitor.c: fix warnings with _FORTIFY_SOURCEKirill A. Shutemov1-2/+10
CC i386-softmmu/monitor.o cc1: warnings being treated as errors /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result make[1]: *** [monitor.o] Error 1 Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 04:32:18 +0000