summaryrefslogtreecommitdiff
path: root/migration.c
AgeCommit message (Collapse)AuthorFilesLines
2013-06-01migration: Remove duplicate bandwidth_limit setLei Li1-1/+0
bandwidth_limit is double set in migrate_init(), remove one. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-17Revert "migration: don't account sleep time for calculating bandwidth"Michael Roth1-4/+1
This reverts commit 7161082c8d8cf167c508976887a0a63f4db92b51. Reverting this patch fixes a divide-by-zero error in qemu that can be fairly reliably triggered by doing block migration. In this case, the configuration/error was: source: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios -M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive file=disk1.img,if=virtio -drive file=disk2.img,if=virtio -device virtio-net-pci,netdev=net0 -netdev user,id=net0 -monitor unix:/tmp/vm-hmp.sock,server,nowait -qmp unix:/tmp/vm-qmp.sock,server,nowait -vnc :100 16837 Floating point exception(core dumped) target: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios -M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive file=target_disk1.img,if=virtio -drive file=target_disk2.img,if=virtio -device virtio-net-pci,netdev=net0 -netdev user,id=net0 -incoming unix:/tmp/migrate.sock -monitor unix:/tmp/vm-hmp-incoming.sock,server,nowait -qmp unix:/tmp/vm-qmp-incoming.sock,server,nowait -vnc :101 Receiving block device images 20 % 21 % load of migration failed This revert potentially re-introduces a bug that was present in 1.4, but fixes a prevalent issue with block migration so we should revert it for now and take an updated patch later. Conflicts: migration.c * fixed up to remove logic introduced in 7161082c while leaving changes in HEAD intact Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1368739544-31021-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17migration: reflect incoming failure to shellEric Blake1-1/+1
Management apps like libvirt don't know to pay attention to stderr unless there is a non-zero exit status. * migration.c (process_incoming_migration_co): Exit with non-zero status on failure. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1366149041-626-1-git-send-email-eblake@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi1-1/+1
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-26migration: do not sent zero pages in bulk stagePeter Lieven1-1/+2
during bulk stage of ram migration if a page is a zero page do not send it at all. the memory at the destination reads as zero anyway. even if there is an madvise with QEMU_MADV_DONTNEED at the target upon receipt of a zero page I have observed that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously. this patch also updates QMP to return the number of skipped pages in MigrationStats. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: inline migrate_fd_closePaolo Bonzini1-12/+2
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: eliminate s->migration_filePaolo Bonzini1-47/+4
The indirection is useless now. Backends can open s->file directly. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move contents of migration_close to migrate_fd_cleanupPaolo Bonzini1-10/+7
With this patch, the migration_file is not needed anymore. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move rate limiting to QEMUFilePaolo Bonzini1-50/+1
Rate limiting is now simply a byte counter; client call qemu_file_rate_limit() manually to determine if they have to exit. So it is possible and simple to move the functionality to QEMUFile. This makes the remaining functionality of s->file redundant; in the next patch we can remove it and write directly to s->migration_file. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: small changes around rate-limitingPaolo Bonzini1-8/+11
This patch extracts a few small changes from the next patch, which are unrelated to adding generic rate-limiting functionality to QEMUFile. Make migration_set_rate_limit a simple accessor, and use qemu_file_set_rate_limit consistently. Also fix a typo where INT_MAX should have been SIZE_MAX. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_ftell to compute bandwidthPaolo Bonzini1-1/+3
Prepare for when s->bytes_xfer will be removed. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for writing outgoing migration dataPaolo Bonzini1-38/+8
Second, drop the file descriptor indirection, and write directly to the QEMUFile. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for migration channel lifetimePaolo Bonzini1-3/+5
As a start, use QEMUFile to store the destination and close it. qemu_get_fd gets a file descriptor that will be used by the write callbacks. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_file_rate_limit consistentlyPaolo Bonzini1-2/+2
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: remove useless qemu_file_get_error checkPaolo Bonzini1-6/+0
migration_put_buffer is never called if there has been an error. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: detect error before sleepingPaolo Bonzini1-3/+4
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: eliminate last_roundPaolo Bonzini1-6/+5
We will go around the loop exactly once after setting last_round. Eliminate the variable altogether. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11Rename buffered_ to migration_Juan Quintela1-16/+16
This is consistent once that we have moved everything to migration.c Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: yay, buffering is gonePaolo Bonzini1-58/+21
Buffering was needed because blocking writes could take a long time and starve other threads seeking to grab the big QEMU mutex. Now that all writes (except within _complete callbacks) are done outside the big QEMU mutex, we do not need buffering at all. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: run setup callbacks out of big lockPaolo Bonzini1-2/+0
Only the migration_bitmap_sync() call needs the iothread lock. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: run pending/iterate callbacks out of big lockPaolo Bonzini1-2/+2
This makes it possible to do blocking writes directly to the socket, with no buffer in the middle. For RAM, only the migration_bitmap_sync() call needs the iothread lock. For block migration, it is needed by the block layer (including bdrv_drain_all and dirty bitmap access), but because some code is shared between iterate and complete, all of mig_save_device_dirty is run with the lock taken. In the savevm case, the iterate callback runs within the big lock. This is annoying because it complicates the rules. Luckily we do not need to do anything about it: the RAM iterate callback does not need the iothread lock, and block migration never runs during savevm. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: cleanup migration (including thread) in the iothreadPaolo Bonzini1-18/+20
Perform final cleanup in a bottom half, and add joining the thread to the series of cleanup actions. migrate_fd_error remains for connection error, but it doesn't need to cleanup anything anymore. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: prepare to access s->state outside critical sectionsPaolo Bonzini1-12/+21
Accessing s->state outside the big QEMU lock will simplify a bit the locking/unlocking of the iothread lock. We need to keep the lock in migrate_fd_error and migrate_fd_completed, however, because they call migrate_fd_cleanup. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: add migrate_set_state tracepointKazuya Saito1-1/+8
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: do not nest flushing of device dataPaolo Bonzini1-31/+24
Completion of migration is currently done with a "nested" loop that invokes buffered_flush: migrate_fd_completed is called by buffered_file_thread, which calls migrate_fd_cleanup, which calls buffered_close (via qemu_fclose), which flushes the buffer. Simplify this, by reusing the buffered_flush call of buffered_file_thread. Then if qemu_savevm_state_complete was called, and the buffer is empty (including the QEMUFile buffer, for which we need the previous patch), we are done. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: simplify error handlingPaolo Bonzini1-32/+14
Always use qemu_file_get_error to detect errors, since that is how QEMUFile itself drops I/O after an error occurs. There is no need to propagate and check return values all the time. Also remove the "complete" member, since we know that it is set (via migrate_fd_cleanup) only when the state changes. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_file_set_errorPaolo Bonzini1-16/+6
Remove the return value of buffered_flush, pass it via the error code of s->file. Once this is done, the error can be retrieved simply via migrate_fd_close's call to qemu_fclose. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: flush all data to fd when buffered_flush is calledPaolo Bonzini1-0/+2
Including data that resided in the QEMUFile's own buffer. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move more error handling to migrate_fd_cleanupPaolo Bonzini1-6/+10
The next patch will add more cases where qemu_savevm_state_cancel needs to be called; prepare for that already, the function can be called twice with no ill effect. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: always use vm_stop_force_statePaolo Bonzini1-5/+1
vm_stop_force_state does: if (runstate_is_running()) { vm_stop(state); } else { runstate_set(state); } migration.c does: if (runstate_is_running()) { vm_stop(state); } else { vm_stop_force_state(state); } The code run is the same even if we always use vm_stop_force_state in migration.c. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: simplify while loopPaolo Bonzini1-10/+1
Unify the goto around the loop, with the exit condition at the end of it. Both can be expressed as "while (ret >= 0)". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-02-22migration: calculate expected_downtimeJuan Quintela1-0/+5
We removed the calculation in commit e4ed1541ac9413eac494a03532e34beaf8a7d1c5 Now we add it back. We need to create dirty_bytes_rate because we can't include cpu-all.h from migration.c, and there is no other way to include TARGET_PAGE_SIZE. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: don't account sleep time for calculating bandwidthJuan Quintela1-1/+4
While we are sleeping we are not sending, so we should not use that time to estimate our bandwidth. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: calculate end time after we have sent the dataJuan Quintela1-1/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: change initial value of expected_downtimeJuan Quintela1-0/+2
0 is a very bad initial value, what we are trying to get is max_downtime, so that is a much better estimation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-11migration: restrict scope of incoming fd read handlerStefan Hajnoczi1-8/+0
The incoming migration is processed in a coroutine and uses an fd read handler to enter the yielded coroutine when data becomes available. The read handler was set too broadly, so that spurious coroutine entries were be triggered if other coroutine users yielded (like the block layer's bdrv_write() function). Install the fd read only only when yielding for more data to become available. This prevents spurious coroutine entries which break code that assumes only a specific set of places can re-enter the coroutine. This patch fixes crashes in block/raw-posix.c that are triggered with "migrate -b" when qiov becomes a dangling pointer due to a spurious coroutine entry that frees qiov early. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360598505-5512-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-11error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-1/+1
Commit 6daf194d and be62a2eb got rid of a bunch, but they keep coming back. Tracked down with this Coccinelle semantic patch: @r@ expression err, eno, cls, fmt; position p; @@ ( error_report(fmt, ...)@p | error_set(err, cls, fmt, ...)@p | error_set_errno(err, eno, cls, fmt, ...)@p | error_setg(err, fmt, ...)@p | error_setg_errno(err, eno, fmt, ...)@p ) @script:python@ fmt << r.fmt; p << r.p; @@ if "\\n" in str(fmt): print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt) Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1360354939-10994-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-17migration: remove argument to qemu_savevm_state_cancelJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: Only go to the iterate stage if there is anything to sendJuan Quintela1-1/+1
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: unfold rest of migrate_fd_put_ready() into threadJuan Quintela1-54/+41
This will allow us finer control in next patches. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: move exit condition to migration threadJuan Quintela1-6/+8
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: Add buffered_flush error handlingJuan Quintela1-1/+2
Now that we have error handling we can do proper handling of buffered_flush(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: move beginning stage to the migration threadJuan Quintela1-13/+15
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17migration: fix off-by-one in buffered_rate_limitPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
2013-01-17migration: remove double call to migrate_fd_closePaolo Bonzini1-1/+0
The call in buffered_close is enough, because buffered_close is called already by migrate_fd_cleanup. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
2013-01-17migration: make function staticPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
2013-01-17use XFER_LIMIT_RATIO consistentlyPaolo Bonzini1-1/+1
commit 5b4e1eb769eee892b44d3f6b2369b05196442f59 missed this use. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com>
2012-12-20migration: merge QEMUFileBuffered into MigrationStateJuan Quintela1-38/+25
Avoid splitting the state of outgoing migration, more or less arbitrarily, between two data structures. QEMUFileBuffered anyway is used only during migration. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration: fix qemu_get_fd for BufferedFilePaolo Bonzini1-1/+1
Not really used, but nice to have it correct. :) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration: move migration notifierJuan Quintela1-2/+1
At this point, it is waranteed that state is ACTIVE. Old position didn't assured hat. Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 23:57:39 +0000