summaryrefslogtreecommitdiff
path: root/kvm-stub.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-09kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'Peter Maydell1-0/+1
On x86 userspace delivers interrupts to the kernel asynchronously (and therefore VCPU idle management is done in the kernel) if and only if there is an in-kernel irqchip. On other architectures this isn't necessarily true (they may always send interrupts asynchronously), so define a new kvm_async_interrupts_enabled() function instead of misusing kvm_irqchip_in_kernel(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-12virtio: move common irqfd handling out of virtio-pciPaolo Bonzini1-0/+10
All transports can use the same event handler for the irqfd, though the exact mechanics of the assignment will be specific. Note that there are three states: handled by the kernel, handled in userspace, disabled. This also lets virtio use event_notifier_set_handler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Enable use of kvm_irqchip_in_kernel in hwlib codeJan Kiszka1-0/+1
Provide a dummy kvm_kernel_irqchip so that kvm_irqchip_in_kernel can be used by code that is not under CONFIG_KVM protection. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add/remove_irqfdJan Kiszka1-0/+10
Add services to associate an eventfd file descriptor as input with an IRQ line as output. Such a line can be an input pin of an in-kernel irqchip or a virtual line returned by kvm_irqchip_add_route. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Publicize kvm_irqchip_release_virqJan Kiszka1-0/+4
This allows to drop routes created by kvm_irqchip_add_irq/msi_route again. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add_msi_routeJan Kiszka1-0/+8
Add a service that establishes a static route from a virtual IRQ line to an MSI message. Will be used for IRQFD and device assignment. As we will use this service outside of CONFIG_KVM protected code, stub it properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-12kvm: Drop unused kvm_pit_in_kernelJan Kiszka1-6/+0
This is now implied by kvm_irqchip_in_kernel. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-12kvm: allow arbitrarily sized mmio ioeventfdMichael S. Tsirkin1-1/+1
We use a 2 byte ioeventfd for virtio memory, add support for this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber1-11/+11
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-07kvm: Add kvm_has_pit_state2 helperJan Kiszka1-0/+5
To be used for in-kernel PIT emulation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-08kvm: Implement kvm_irqchip_in_kernel like kvm_enabledJan Kiszka1-5/+0
To both avoid that kvm_irqchip_in_kernel always has to be paired with kvm_enabled and that the former ends up in a function call, implement it like the latter. This means keeping the state in a global variable and defining kvm_irqchip_in_kernel as a preprocessor macro. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-01-19kvm: x86: Establish IRQ0 override controlJan Kiszka1-0/+5
KVM is forced to disable the IRQ0 override when we run with in-kernel irqchip but without IRQ routing support of the kernel. Set the fwcfg value correspondingly. This aligns us with qemu-kvm. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl1-1/+1
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-20kvm: Clean up stubsJan Kiszka1-17/+1
No one references kvm_check_extension, kvm_has_vcpu_events, and kvm_has_robust_singlestep outside KVM code. kvm_update_guest_debug is never called, thus has no job besides returning an error. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl1-1/+0
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-14Introduce log_start/log_stop in CPUPhysMemoryClientAnthony PERARD1-10/+0
In order to use log_start/log_stop with Xen as well in the vga code, this two operations have been put in CPUPhysMemoryClient. The two new functions cpu_physical_log_start,cpu_physical_log_stop are used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does no longer depends on kvm header. [ Jan: rebasing and style fixlets ] Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14kvm: Provide sigbus services arch-independentlyJan Kiszka1-0/+5
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery from cpus.c. This patch also fixes --disable-kvm build by providing the missing kvm_on_sigbus_vcpu kvm-stub. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-23kvm: Drop smp_cpus argument from init functionsJan Kiszka1-1/+1
No longer used. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-10kvm: test for ioeventfd support on old kernelsStefan Hajnoczi1-0/+5
There used to be a limit of 6 KVM io bus devices in the kernel. On such a kernel, we can't use many ioeventfds for host notification since the limit is reached too easily. Add an API to test for this condition. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20MCE: Relay UCR MCE to guestMarcelo Tosatti1-0/+5
Port qemu-kvm's commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef Author: Huang Ying <ying.huang@intel.com> Date: Mon Sep 21 10:43:25 2009 +0800 MCE: Relay UCR MCE to guest UCR (uncorrected recovery) MCE is supported in recent Intel CPUs, where some hardware error such as some memory error can be reported without PCC (processor context corrupted). To recover from such MCE, the corresponding memory will be unmapped, and all processes accessing the memory will be killed via SIGBUS. For KVM, if QEMU/KVM is killed, all guest processes will be killed too. So we relay SIGBUS from host OS to guest system via a UCR MCE injection. Then guest OS can isolate corresponding memory and kill necessary guest processes only. SIGBUS sent to main thread (not VCPU threads) will be broadcast to all VCPU threads as UCR MCE. aliguori: fix build Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-15Add kvm_set_ioeventfd_mmio_long definition for non-KVM systemsCam Macdonell1-0/+5
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03remove exec-all.h inclusion from cpu.hPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19provide a stub version of kvm-all.c if !CONFIG_KVMPaolo Bonzini1-0/+137
This allows limited use of kvm functions (which will return ENOSYS) even in once-compiled modules. The patch also improves a bit the error messages for KVM initialization. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [blauwirbel@gmail.com: fixed Win32 build] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 14:39:41 +0000