summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2013-02-23Replace all setjmp()/longjmp() with sigsetjmp()/siglongjmp()Peter Maydell2-1/+9
The setjmp() function doesn't specify whether signal masks are saved and restored; on Linux they are not, but on BSD (including MacOSX) they are. We want to have consistent behaviour across platforms, so we should always use "don't save/restore signal mask" (this is also generally going to be faster). This also works around a bug in MacOSX where the signal-restoration on longjmp() affects the signal mask for a completely different thread, not just the mask for the thread which did the longjmp. The most visible effect of this was that ctrl-C was ignored on MacOSX because the CPU thread did a longjmp which resulted in its signal mask being applied to every thread, so that all threads had SIGINT and SIGTERM blocked. The POSIX-sanctioned portable way to do a jump without affecting signal masks is to siglongjmp() to a sigjmp_buf which was created by calling sigsetjmp() with a zero savemask parameter, so change all uses of setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0) to save the signal mask; however the following siglongjmp() must not restore the signal mask, so the pair can be effectively considered as "sigjmp/longjmp which don't touch the mask".] For Windows we provide a trivial sigsetjmp/siglongjmp in terms of setjmp/longjmp -- this is OK because no user will ever pass a non-zero savemask. The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c are left untouched because these are self-contained singlethreaded test programs intended to be run under QEMU's Linux emulation, so they have neither the portability nor the multithreading issues to deal with. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23qemu-log: Remove qemu_log_try_set_file() and its usersPeter Maydell1-8/+0
Remove the function qemu_log_try_set_file() and its users (which are all in TCG code generation functions for various targets). This function was added to abstract out code which was originally written as "if (!logfile) logfile = stderr;" in order that BUG: case code which did an unguarded "fprintf(logfile, ...)" would not crash if debug logging was not enabled. Since those direct uses of logfile have also been abstracted away into qemu_log() calls which check for a NULL logfile, there is no need for the target-* files to mess with the user's chosen logging settings. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-21ui: add basic GTK gui (v5)Anthony Liguori2-0/+5
This is minimalistic and just contains the basic widget infrastructure. The GUI consists of a menu and a GtkNotebook. To start with, the notebook has its tabs hidden which provides a UI that looks very similar to SDL with the exception of the menu bar. The menu bar allows a user to toggle the visibility of the tabs. Cairo is used for rendering. I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU since it was originally written as a remote display for QEMU. So for the most part, the approach to rendering and keyboard handling should be pretty solid for GTK. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
2013-02-21console: allow VCs to be overridden by UIAnthony Liguori1-1/+5
We want to expose VCs using a VteTerminal widget. We need access to provide our own CharDriverState in order to do this. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-3-git-send-email-aliguori@us.ibm.com
2013-02-21vga: fix byteswapping.Gerd Hoffmann1-1/+2
In case host and guest endianness differ the vga code first creates a shared surface (using qemu_create_displaysurface_from), then goes patch the surface format to indicate that the bytes must be swapped. The switch to pixman broke that hack as the format patching isn't propagated into the pixman image, so ui code using the pixman image directly (such as vnc) uses the wrong format. Fix that by adding a byteswap parameter to qemu_create_displaysurface_from, so we'll use the correct format when creating the surface (and the pixman image) and don't have to patch the format afterwards. [ v2: unbreak xen build ] Cc: qemu-stable@nongnu.org Cc: mark.cave-ayland@ilande.co.uk Cc: agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21aio: convert aio_poll() to g_poll(3)Stefan Hajnoczi1-0/+3
AioHandler already has a GPollFD so we can directly use its events/revents. Add the int pollfds_idx field to AioContext so we can map g_poll(3) results back to AioHandlers. Reuse aio_dispatch() to invoke handlers after g_poll(3). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21iohandler: switch to GPollFDStefan Hajnoczi1-2/+2
Convert iohandler_select_fill() and iohandler_select_poll() to use GPollFD instead of rfds/wfds/xfds. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-7-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21Remove forward declaration of non-existant variableHervé Poussineau1-1/+0
This variable has been removed 5 years ago in 970ac5a3082428dca91171f270dcd95d6f4b2636. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-18Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori4-9/+16
# By Andreas Färber # Via Andreas Färber * afaerber/qom-cpu: (47 commits) target-i386: Split command line parsing out of cpu_x86_register() target-i386: Move cpu_x86_init() target-lm32: Drop unused cpu_lm32_close() prototype target-s390x: Drop unused cpu_s390x_close() prototype spapr_hcall: Replace open-coded CPU loop with qemu_get_cpu() ppce500_spin: Replace open-coded CPU loop with qemu_get_cpu() e500: Replace open-coded loop with qemu_get_cpu() cpu: Add CPUArchState pointer to CPUState cputlb: Pass CPUState to cpu_unlink_tb() cpu: Move current_tb field to CPUState cpu: Move exit_request field to CPUState cpu: Move running field to CPUState cpu: Move host_tid field to CPUState target-cris: Introduce CRISCPU subclasses target-m68k: Pass M68kCPU to m68k_set_irq_level() mcf_intc: Pass M68kCPU to mcf_intc_init() mcf5206: Pass M68kCPU to mcf5206_init() target-m68k: Return M68kCPU from cpu_m68k_init() ppc405_uc: Pass PowerPCCPU to ppc40x_{core,chip,system}_reset() target-xtensa: Move TCG initialization to XtensaCPU initfn ...
2013-02-17host-utils: Use __int128_t for mul[us]64Richard Henderson1-9/+8
Replace some x86_64 specific inline assembly with something that all 64-bit hosts ought to optimize well. At worst this becomes a call to the gcc __multi3 routine, which is no worse than our implementation in util/host-utils.c. With gcc 4.7, we get identical code generation for x86_64. We now get native multiplication on ia64 and s390x hosts. With minor improvements to gcc we can get it for ppc64 as well. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16cpu: Add CPUArchState pointer to CPUStateAndreas Färber1-0/+2
The target-specific ENV_GET_CPU() macros have allowed us to navigate from CPUArchState to CPUState. The reverse direction was not supported. Avoid introducing CPU_GET_ENV() macros by initializing an untyped pointer that is initialized in derived instance_init functions. The field may not be called "env" due to it being poisoned. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Move current_tb field to CPUStateAndreas Färber3-2/+6
Explictly NULL it on CPU reset since it was located before breakpoints. Change vapic_report_tpr_access() argument to CPUState. This also resolves the use of void* for cpu.h independence. Change vAPIC patch_instruction() argument to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Move exit_request field to CPUStateAndreas Färber2-2/+2
Since it was located before breakpoints field, it needs to be reset. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Move running field to CPUStateAndreas Färber2-1/+2
Pass CPUState to cpu_exec_{start,end}() functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Move host_tid field to CPUStateAndreas Färber3-4/+4
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState is no longer used. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16bitops: Remove routines redundant with host-utilsRichard Henderson1-48/+0
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16bitops: Write bitops_flsl in terms of clzlRichard Henderson1-28/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16hbitmap: Use non-bitops ctzlRichard Henderson1-1/+2
Both uses of ctz have already eliminated zero, and thus the difference in edge conditions between the two routines is irrelevant. Signed-off-by: Richard Henderson <rth@twiddle.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16host-utils: Fix coding style and add commentsRichard Henderson1-18/+82
Add function comments to the routines, documenting the corner cases upon which we are standardizing. Fix the few instances of non-standard coding style. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16host-utils: Add host long specific aliases for clz, ctz, ctpopRichard Henderson1-0/+19
We will standardize on these names, rather than the similar routines currently residing in qemu/bitops.h. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename CPULogItem, cpu_log_items to QEMULogItem, qemu_log_itemsPeter Maydell1-3/+3
Rename the typedef CPULogItem and the public array cpu_log_items to names that better reflect the fact that the qemu_log functionality isn't restricted to TCG CPU debug logs any more. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16cpus.c: Drop unnecessary set_cpu_log()Peter Maydell1-1/+0
The set_cpu_log() function in cpus.c is a fairly simple wrapper which is only called from one location. Just inline the code into vl.c, since there is no need to indirect it via cpus.c and the handling of the error case is more appropriate to vl.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename the public-facing cpu_set_log function to qemu_set_logPeter Maydell1-4/+8
Rename the public-facing function cpu_set_log to qemu_set_log. This requires us to rename the internal-only qemu_set_log() to do_qemu_set_log(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Rename cpu_str_to_log_mask to qemu_str_to_log_maskPeter Maydell1-1/+1
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since the qemu_log functionality is no longer restricted to TCG CPU debug logging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Abstract out "print usage message about valid log categories"Peter Maydell1-0/+5
Abstract out the "print a human readable list of all the valid log categories" functionality which is currently duplicated in three separate places. (We leave the monitor.c help_cmd() implementation as-is since it wants to send the message to the monitor and add its own information.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16qemu-log: Unify {cpu_set,set_cpu}_log_filename as qemu_set_log_filenamePeter Maydell2-2/+1
The qemu_log() functionality is no longer specific to TCG CPU debug logs. Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the pointless wrapper set_cpu_log_filename(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16TCG: Move translation block variables to new context inside tcg_ctx: tb_ctxEvgeny Voevodin1-8/+19
It's worth to clean-up translation blocks variables and move them into one context as was suggested by Swirl. Also if we use this context directly inside tcg_ctx, then it speeds up code generation a bit. Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-12migration: make qemu_ftell() public and support writable filesStefan Hajnoczi1-0/+1
Migration .save_live_iterate() functions return the number of bytes transferred. The easiest way of doing this is by calling qemu_ftell(f) at the beginning and end of the function to calculate the difference. Make qemu_ftell() public so that block-migration will be able to use it. Also adjust the ftell calculation for writable files where buf_offset does not include buf_size. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 1360661835-28663-2-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06bswap: Fix width of swap in leul_to_cpuRichard Henderson1-2/+10
The misnamed HOST_LONG_BITS is really HOST_POINTER_BITS. Here we're explicitly using an unsigned long, rather than uintptr_t, so it is more correct to select the swap size via ULONG_MAX. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04cutils: unsigned int parsing functionsEduardo Habkost1-0/+4
There are lots of duplicate parsing code using strto*() in QEMU, and most of that code is broken in one way or another. Even the visitors code have duplicate integer parsing code[1]. This introduces functions to help parsing unsigned int values: parse_uint() and parse_uint_full(). Parsing functions for signed ints and floats will be submitted later. parse_uint_full() has all the checks made by opts_type_uint64() at opts-visitor.c: - Check for NULL (returns -EINVAL) - Check for negative numbers (returns -EINVAL) - Check for empty string (returns -EINVAL) - Check for overflow or other errno values set by strtoll() (returns -errno) - Check for end of string (reject invalid characters after number) (returns -EINVAL) parse_uint() does everything above except checking for the end of the string, so callers can continue parsing the remainder of string after the number. Unit tests included. [1] string-input-visitor.c:parse_int() could use the same parsing code used by opts-visitor.c:opts_type_int(), instead of duplicating that logic. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-02bitops: unify bitops_ffsl with the one in host-utils.h, call it bitops_ctzlPaolo Bonzini3-60/+23
We had two copies of a ffs function for longs with subtly different semantics and, for the one in bitops.h, a confusing name: the result was off-by-one compared to the library function ffsl. Unify the functions into one, and solve the name problem by calling the 0-based functions "bitops_ctzl" and "bitops_ctol" respectively. This also fixes the build on platforms with ffsl, including Mac OS X and Windows. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-02util: Fix compilation of envlist.c for MinGWStefan Weil1-0/+2
MinGW has no strtok_r, so we need a declaration in sysemu/os-win32.h. We must also fix the include statements in util/envlist.c to include that file. We currently don't need an implementation of strtok_r because the code is compiled but not linked for MinGW. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-01qom: remove object_deletePaolo Bonzini1-17/+10
This is now unused. Document the initial reference count of an object and when it will be freed/finalized. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qom: document reference counting of link propertiesPaolo Bonzini1-0/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01accel: change {xen, kvm, tcg, qtest}_allowed from int to boolliguang2-2/+2
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori1-0/+1
# By Kevin Wolf (7) and others # Via Stefan Hajnoczi * stefanha/block: block/raw-posix: Build fix for O_ASYNC vmdk: Allow space in file name parallels: Fix bdrv_open() error handling dmg: Use g_free instead of free dmg: Fix bdrv_open() error handling vpc: Fix bdrv_open() error handling cloop: Fix bdrv_open() error handling bochs: Fix bdrv_open() error handling sheepdog: pass vdi_id to sheep daemon for sd_close() vmdk: Allow selecting SCSI adapter in image creation block: Adds mirroring tests for resized images block: Fix is_allocated_above with resized files qemu-iotests: Add regression test for b7ab0fea
2013-02-01tap: multiqueue supportJason Wang1-1/+0
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: introduce a helper to get the name of an interfaceJason Wang1-0/+1
This patch introduces a helper tap_get_ifname() to get the device name of tap device. This is needed when ifname is unspecified in the command line and qemu were asked to create tap device by itself. In this situation, the name were allocated by kernel, so if multiqueue is asked, we need to fetch its name after creating the first queue. Only linux has this support since it's the only platform that supports multiqueue tap. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: support enabling or disabling a queueJason Wang1-0/+2
This patch introduce a new bit - enabled in TAPState which tracks whether a specific queue/fd is enabled. The tap/fd is enabled during initialization and could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform specific helpers to do the real work. Polling of a tap fd can only done when the tap was enabled. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: multiqueue supportJason Wang1-4/+14
This patch adds basic multiqueue support for qemu. The idea is simple, an array of NetClientStates were introduced in NICState, parse_netdev() were extended to find and match all NetClientStates belongs to the backend and place their pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates that belongs to a nic and NICStates belongs to the netdev. And a queue_index were introduced in NetClientState to track its index. After this, each peers of a NICState were abstracted as a queue. After this change, all NetClientState that belongs to the same backend/nic has the same id. When use want to change the link status, all NetClientStates that belongs to the same backend/nic will be also changed. When user want to delete a device or netdev, all NetClientStates that belongs to the same backend/nic will be deleted also. Changing or deleting an specific queue is not allowed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce NetClientState destructorJason Wang1-0/+2
To allow allocating an array of NetClientState and free it once, this patch introduces destructor of NetClientState. Which could do type specific free, which could be used by multiqueue to free the array once. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_find_net_clients_except()Jason Wang1-0/+2
In multiqueue, all NetClientState that belongs to the same netdev or nic has the same id. So this patches introduces an helper qemu_find_net_clients_except() which finds all NetClientState with the same id. This will be used by multiqueue networking. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: intorduce qemu_del_nic()Jason Wang1-0/+1
To support multiqueue nic, this patch separate the nic destructor from qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween NiCState and NetClientState were not 1:1 in multiqueue. The following patches would refactor this function to support multiqueue nic. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_nic()Jason Wang1-0/+2
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_queue()Jason Wang1-0/+1
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: tap: using bool instead of bitfieldJason Wang1-2/+2
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01vmdk: Allow selecting SCSI adapter in image creationOthmar Pasteka1-0/+1
Introduce a new option "adapter_type" when converting to vmdk images. It can be one of the following: ide (default), buslogic, lsilogic or legacyESX (according to the vmdk spec from vmware). In case of a non-ide adapter, heads is set to 255 instead of the 16. The latter is used for "ide". Also see LP#545089 Signed-off-by: Othmar Pasteka <pasteka@kabsi.at> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30qemu-pixman.h: Avoid mutual inclusion loop with console.hPeter Maydell2-1/+2
Remove an unnecessary mutual inclusion loop between qemu-pixman.h and console.h, since the former was only including the latter for 'PixelFormat*', which can be provided by typedefs.h. This requires a minor adjustment to the files which included qemu-pixman.h, since they were relying on it implicitly dragging in all of console.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-28Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori4-3/+35
* afaerber/qom-cpu: (37 commits) kvm: Pass CPUState to kvm_on_sigbus_vcpu() cpu: Unconditionalize CPUState fields target-m68k: Use type_register() instead of type_register_static() target-unicore32: Use type_register() instead of type_register_static() target-openrisc: Use type_register() instead of type_register_static() target-unicore32: Catch attempt to instantiate abstract type in cpu_init() target-openrisc: Catch attempt to instantiate abstract type in cpu_init() target-m68k: Catch attempt to instantiate abstract type in cpu_init() target-arm: Catch attempt to instantiate abstract type in cpu_init() target-alpha: Catch attempt to instantiate abstract type in cpu_init() qom: Introduce object_class_is_abstract() target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init() target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init() target-m68k: Detect attempt to instantiate non-CPU type in cpu_init() target-alpha: Detect attempt to instantiate non-CPU type in cpu_init() target-arm: Detect attempt to instantiate non-CPU type in cpu_init() cpu: Add model resolution support to CPUClass target-i386: Remove setting tsc-frequency from x86_def_t target-i386: Set custom features/properties without intermediate x86_def_t target-i386: Remove vendor_override field from CPUX86State ... Conflicts: tests/Makefile Resolved simple conflict caused by lack of context in Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-28Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori5-8/+250
# By Paolo Bonzini (14) and others # Via Kevin Wolf * kwolf/for-anthony: (24 commits) ide: Add fall through annotations block: Create proper size file for disk mirror ahci: Add migration support ahci: Change data types in preparation for migration ahci: Remove unused AHCIDevice fields hbitmap: add assertion on hbitmap_iter_init mirror: do nothing on zero-sized disk block/vdi: Check for bad signature block/vdi: Improved return values from vdi_open block/vdi: Improve debug output for signature block: Use error code EMEDIUMTYPE for wrong format in some block drivers block: Add special error code for wrong format mirror: support arbitrarily-sized iterations mirror: support more than one in-flight AIO operation mirror: add buf-size argument to drive-mirror mirror: switch mirror_iteration to AIO mirror: allow customizing the granularity block: allow customizing the granularity of the dirty bitmap block: return count of dirty sectors, not chunks mirror: perform COW if the cluster size is bigger than the granularity ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 00:14:26 +0000