summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2014-06-19Add new vhost-user netdev backendNikolay Nikolaev1-0/+17
Add a new QEMU netdev backend that is intended to invoke vhost_net with the vhost-user backend. It uses an Unix socket chardev to establish a communication with the 'slave' (client and server mode supported). At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon disconnection it will set link_down accordingly and notify virtio-net; the virtio-net interface will go down. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost-backend and VhostBackendTypeNikolay Nikolaev3-2/+15
Use vhost_set_backend_type to initialise a proper vhost_ops structure. In vhost_net_init and vhost_net_start_one call conditionally TAP related initialisation depending on the vhost backend type. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost_ops to vhost_dev struct and replace all relevant ioctlsNikolay Nikolaev2-0/+29
Decouple vhost from the Linux kernel by introducing vhost_ops. The intention is to provide different backends - a 'kernel' backend based on the ioctl interface, and an 'user' backend based on a UNIX domain socket and shared memory interface. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost_net_init will use VhostNetOptions to get all its argumentsNikolay Nikolaev2-2/+8
vhost_dev_init will replace devfd and devpath with a single opaque argument. This is initialised with a file descriptor. When TAP is used (through vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and pass the fd. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Refactor virtio-net to use generic get_vhost_netNikolay Nikolaev1-0/+1
This decouples virtio-net from the TAP netdev backend and allows support for other backends to be implemented. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost: add vhost_get_features and vhost_ack_featuresNikolay Nikolaev1-0/+5
Generalize the features get/ack to be used for both vhost-net and vhost-scsi. In vhost-net add vhost_net_get_feature_bits to select the feature bit set depending on the NetClient kind. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add G_IO_HUP handler for socket chardevNikolay Nikolaev1-0/+1
This is used to detect that the remote end has disconnected. Just call tcp_char_disconnect on receiving this event. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_get_msgfdsNikolay Nikolaev1-1/+14
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set of fds. The function for receiving the fds - unix_process_msgfd is extended to allocate the needed array size. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_set_msgfdsNikolay Nikolaev1-0/+14
This will set an array of file descriptors to the internal structures. The next time a message is send the array will be send as ancillary data. This feature works on the UNIX domain socket backend only. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add chardev API qemu_chr_fe_read_allNikolay Nikolaev1-0/+14
This function will attempt to read data from the chardev trying to fill the buffer up to the given length. Add tcp_chr_disconnect to reuse disconnection code where needed. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add kvm_eventfds_enabled functionNikolay Nikolaev1-0/+11
Add a function to check if the eventfd capability is present in KVM in the host kernel. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-19virtio-net: announce self by guestJason Wang2-0/+22
It's hard to track all mac addresses and their configurations (e.g vlan or ipv6) in qemu. Without this information, it's impossible to build proper garp packet after migration. The only possible solution to this is let guest (who knows all configurations) to do this. So, this patch introduces a new readonly config status bit of virtio-net, VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce presence of its link through config update interrupt.When guest has done the announcement, it should ack the notification through VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by Linux guest). During load, a counter of announcing rounds is set so that after the vm is running it can trigger rounds of config interrupts to notify the guest to build and send the correct garps. Cc: Liuyongan <liuyongan@huawei.com> Cc: Amos Kong <akong@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19migration: introduce self_announce_delay()Jason Wang1-0/+8
This patch introduces self_announce_delay() to calculate the delay for the next announce round. This could be used by other device e.g virtio-net who wants to do announcing by itself. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19migration: export SELF_ANNOUNCE_ROUNDSJason Wang1-0/+2
Export it for other users. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19ich: get rid of spaces in type nameMichael S. Tsirkin2-2/+2
Names with spaces in them are nasty, let's not go there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add "hotplug-memory-region-size" property to PC_MACHINEIgor Mammedov1-0/+1
... it will be used by acpi-build code and by unit tests Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: ACPI BIOS: implement memory hotplug interfaceIgor Mammedov1-0/+21
- provides static SSDT object for memory hotplug that can handle upto 256 hotplugable memory slots - SSDT template for memory devices and runtime generator of them in SSDT table. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add acpi-device link to PCMachineStateIgor Mammedov1-1/+7
the link will used later to access device implementing ACPI functions instead of adhoc lookup in QOM tree. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: migrate piix4 & ich9 MemHotplugStateIgor Mammedov1-0/+7
Adds an optional subsection that allows to migrate current state of acpi_memory_hotplug of ACPI PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:ich9: add memory hotplug handlingIgor Mammedov2-1/+10
Add memory hotplug initialization/handling to ICH9 LPC device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:piix4: add memory hotplug handlingIgor Mammedov2-1/+8
Add memory hotplug initialization/handling to PIIX4_PM device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: resolve conflict in pc.h
2014-06-19acpi: memory hotplug ACPI hardware implementationIgor Mammedov2-0/+32
- implements QEMU hardware part of memory hotplug protocol described at "docs/specs/acpi_mem_hotplug.txt" - handles only memory add notification event for now Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi: rename cpu_hotplug_defs.h to pc-hotplug.hIgor Mammedov2-4/+4
to make it more generic, so it could be used for memory hotplug as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc-dimm: add busy slot check and slot auto-allocationIgor Mammedov1-0/+2
- if slot property is not specified on -device/device_add command, treat default value as request for assigning PCDIMMDevice to the first free slot. - if slot is provided with -device/device_add command, attempt to use it or fail command if it's already occupied. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc-dimm: add busy address check and address auto-allocationIgor Mammedov1-0/+4
- if 'addr' property is not specified on -device/device_add command, treat the default value as request for assigning PCDIMMDevice to the first free memory region. - if 'addr' is provided with -device/device_add command, attempt to use it or fail command if it's already occupied or falls inside of an existing PCDIMMDevice memory region. Note: GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint', however it might be too small to fit difference between 2 addresses. So use 128bit to calculate the difference and normalize result to -1/0/1 return values. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andrey Korolyov <andrey@xdel.ru> MST: commit log tweaks
2014-06-19pc: add memory hotplug handler to PC_MACHINEIgor Mammedov1-0/+8
that will perform mapping of PC_DIMM device into guest's RAM address space Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOSIgor Mammedov1-0/+1
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI BARs mapping could safely start in high memory. Allowing BIOS to start mapping 64-bit PCI BARs at address where it wouldn't conflict with other mappings QEMU might place before it. That permits QEMU to reserve extra address space before 64-bit PCI hole for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: exit QEMU if number of slots more than supported 256Igor Mammedov1-0/+6
... which is imposed by current naming scheme of ACPI memory devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: initialize memory hotplug address spaceIgor Mammedov1-0/+10
initialize and map hotplug memory address space container into guest's RAM address space. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19memory: add memory_region_is_mapped() APIIgor Mammedov1-0/+8
which allows to check if MemoryRegion is already mapped. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: implement pc-dimm device abstractionVasilis Liaskovitis1-0/+73
Each hotplug-able memory slot is a PCDIMMDevice. A hot-add operation for a memory device: - creates a new PCDIMMDevice and makes hotplug controller to map it into guest address space Hotplug operations are done through normal device_add commands. For migration case, all hotplugged memory devices on source should be specified on target's command line using '-device' option with properties set to the same values as on source. To simplify review, patch introduces only PCDIMMDevice QOM skeleton that will be extended by following patches to implement actual memory hotplug and related functions. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qdev: hotplug for bus-less devicesIgor Mammedov1-0/+8
Add get_hotplug_handler() method to machine, and make bus-less device use it during hotplug as a means to discover a hotplug handler controller. The returned controller is used to perform hotplug actions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vl.c: extend -m option to support options for memory hotplugIgor Mammedov1-0/+2
Add following parameters: "slots" - total number of hotplug memory slots "maxmem" - maximum possible memory "slots" and "maxmem" should go in pair and "maxmem" should be greater than "mem" for memory hotplug to be enabled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix build on 32 bit
2014-06-18add memdev backend infrastructureIgor Mammedov1-0/+60
Provides framework for splitting host RAM allocation/ policies into a separate backend that could be used by devices. Initially only legacy RAM backend is provided, which uses memory_region_init_ram() allocator and compatible with every CLI option that affects memory_region_init_ram(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18pc: create custom generic PC machine typeIgor Mammedov1-0/+24
it will be used for PC specific options/variables Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18memory: MemoryRegion: rename parent to containerPaolo Bonzini1-10/+10
Avoid confusion with the QOM parent. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-17exec: introduce qemu_ram_unset_idstr() to unset RAMBlock idstrHu Tao1-0/+1
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-16Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell18-18/+2850
into staging Patch queue for ppc - 2014-06-16 This pull request brings a lot of fun things. Among others we have - e500: u-boot firmware support - sPAPR: magic page enablement - sPAPR: add "compat" CPU option to support older guests - sPAPR: refactorings in preparation for VFIO - POWER8 live migration - mac99: expose bus frequency - little endian core dump, gdb and disas support - new ppc64le-linux-user target - DFP emulation - bug fixes # gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (156 commits) spapr_pci: Advertise MSI quota PPC: KVM: Make pv hcall endian agnostic powerpc: use float64 for frsqrte spapr: Add kvm-type property spapr: Create SPAPRMachine struct linux-user: Tell guest about big host page sizes spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE spapr_hcall: Split h_set_mode() target-ppc: Enable DABRX SPR and limit it to <=POWER7 target-ppc: Enable PPR and VRSAVE SPRs migration target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs KVM: target-ppc: Enable TM state migration target-ppc: Add POWER8's TM SPRs target-ppc: Add POWER8's MMCR2/MMCRS SPRs target-ppc: Enable FSCR facility check for TAR target-ppc: Add POWER8's FSCR SPR target-ppc: Add POWER8's TIR SPR target-ppc: Refactor class init for POWER7/8 target-ppc: Switch POWER7/8 classes to use correct PMU SPRs target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16spapr_pci: Advertise MSI quotaBadari Pulavarty1-0/+2
Hotplug of multiple disks fails due to MSI vector quota check. Number of MSI vectors default to 8 allowing only 4 devices. This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback to INTX. One way to workaround the issue is to increase total MSIs, so that MSI quota check allows us to hotplug multiple disks. This sets the quota to the maximum number of interupts XICS has which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c to xics.h for wider visibility. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> [aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODEAlexey Kardashevskiy1-0/+5
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from the H_SET_MODE, for POWER8 (PowerISA 2.07) only. This defines AIL flags for LPCR special register. This changes @excp_prefix according to the mode, takes effect in TCG. This turns support of a new capability PPC2_ISA207S flag for TCG. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Support little-endian PPC64 in user mode.Doug Kwan1-0/+5
Look at ELF header to determine ABI version on PPC64. This is required for executing the first instruction correctly. Also print correct machine name in uname() system call. Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Introduce bus_offset in sPAPRTCETableAlexey Kardashevskiy1-0/+2
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts from. It is set to 0 for emulated devices. Dynamic DMA windows will use other offset. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Introduce page_shift in sPAPRTCETableAlexey Kardashevskiy1-0/+2
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR spec allows other page sizes and we are going to implement them, we need page size to be configrable. This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT with it where it is possible. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Get rid of window_size in sPAPRTCETableAlexey Kardashevskiy2-4/+1
This removes window_size as it is basically a copy of nb_table shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are going to support windows as big as the entire RAM and this number will be bigger that 32 capacity, we will have to do something about @window_size anyway and removal seems to be the right way to go. This removes dma_window_start/dma_window_size from sPAPRPHBState as they are no longer used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: Allow multiple TCE tables per PHBAlexey Kardashevskiy1-1/+0
At the moment sPAPRPHBState contains a @tcet pointer to the only TCE table. However sPAPR spec allows having more than one DMA window. Since the TCE object is already a child of SPAPR PHB object, there is no need to keep an additional pointer to it in sPAPRPHBState so remove it. This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable objects. This changes the default DMA window properties calculation. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: spapr_iommu: Make DMA window a subregionAlexey Kardashevskiy1-0/+1
Currently the default DMA window is represented by a single MemoryRegion. However there can be more than just one window so we need a "root" memory region to be separated from the actual DMA window(s). This introduces a "root" IOMMU memory region and adds a subregion for the default DMA 32bit window. Following patches will add other subregion(s). This initializes a default DMA window subregion size to the guest RAM size as this window can be switched into "bypass" mode which implements direct DMA mapping. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: Introduce a finish_realize() callbackAlexey Kardashevskiy1-2/+16
The spapr-pci PHB initializes IOMMU for emulated devices only. The upcoming VFIO support will do it different. However both emulated and VFIO PHB types share most of the initialization code. For the type specific things a new finish_realize() callback is introduced. This introduces sPAPRPHBClass derived from PCIHostBridgeClass and adds the callback pointer. This implements finish_realize() for emulated devices. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: Fix compilation] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16macio ide: Do remainder access asynchronouslyAlexander Graf1-0/+5
The macio IDE controller has some pretty nasty magic in its implementation to allow for unaligned sector accesses. We used to handle these accesses synchronously inside the IO callback handler. However, the block infrastructure changed below our feet and now it's impossible to call a synchronous block read/write from the aio callback handler of a previous block access. Work around that limitation by making the unaligned handling bits also go through our asynchronous handler. This fixes booting Mac OS X for me. Reported-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr: Add ibm, client-architecture-support callAlexey Kardashevskiy1-1/+8
The PAPR+ specification defines a ibm,client-architecture-support (CAS) RTAS call which purpose is to provide a negotiation mechanism for the guest and the hypervisor to work out the best compatibility parameters. During the negotiation process, the guest provides an array of various options and capabilities which it supports, the hypervisor adjusts the device tree and (optionally) reboots the guest. At the moment the Linux guest calls CAS method at early boot so SLOF gets called. SLOF allocates a memory buffer for the device tree changes and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options, composes a diff for the device tree, copies it to the buffer provided by SLOF and returns to SLOF. SLOF updates the device tree and returns control to the guest kernel. Only then the Linux guest parses the device tree so it is possible to avoid unnecessary reboot in most cases. The device tree diff is a header with an update format version (defined as 1 in this patch) followed by a device tree with the properties which require update. If QEMU detects that it has to reboot the guest, it silently does so as the guest expects reboot to happen because this is usual pHyp firmware behavior. This defines custom KVMPPC_H_CAS hypercall. The current SLOF already has support for it. This implements stub which returns very basic tree (root node, no properties) to the guest. As the return buffer does not contain any change, no change in behavior is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16dump: Make DumpState and endian conversion routines available for ↵Bharata B Rao2-10/+63
arch-specific dump code Make DumpState and endian conversion routines available for arch-specific dump code by moving into dump.h. DumpState will be needed by arch-specific dump code to access target endian information from DumpState->ArchDumpInfo. Also break the dependency of dump.h from stubs/dump.c by creating a separate dump-arch.h. This patch doesn't change any functionality. Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [ rebased on top of current master branch, renamed endian helpers to cpu_to_dump{16,32,64}, pass a DumpState * argument to endian helpers, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [agraf: fix to apply] Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 23:12:51 +0000