summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2014-03-05qdev: Keep global allocation counter per busAlexander Graf1-0/+2
When we have 2 separate qdev devices that both create a qbus of the same type without specifying a bus name or device name, we end up with two buses of the same name, such as ide.0 on the Mac machines: dev: macio-ide, id "" bus: ide.0 type IDE dev: macio-ide, id "" bus: ide.0 type IDE If we now spawn a device that connects to a ide.0 the last created bus gets the device, with the first created bus inaccessible to the command line. After some discussion on IRC we concluded that the best quick fix way forward for this is to make automated bus-class type based allocation count a global counter. That's what this patch implements. With this we instead get dev: macio-ide, id "" bus: ide.1 type IDE dev: macio-ide, id "" bus: ide.0 type IDE on the example mentioned above. This also means that if you did -device ...,bus=ide.0 you got a device on the first bus (the last created one) before this patch and get that device on the second one (the first created one) now. Breaks migration unless you change bus=ide.0 to bus=ide.1 on the destination. This is intended and makes the bus enumeration work as expected. As per review request follows a list of otherwise affected boards and the reasoning for the conclusion that they are ok: target machine bus id times ------ ------- ------ ----- aarch64 n800 i2c-bus.0 2 aarch64 n810 i2c-bus.0 2 arm n800 i2c-bus.0 2 arm n810 i2c-bus.0 2 -> Devices are only created explicitly on one of the two buses, using s->mpu->i2c[0], so no change to the guest. aarch64 vexpress-a15 virtio-mmio-bus.0 4 aarch64 vexpress-a9 virtio-mmio-bus.0 4 aarch64 virt virtio-mmio-bus.0 32 arm vexpress-a15 virtio-mmio-bus.0 4 arm vexpress-a9 virtio-mmio-bus.0 4 arm virt virtio-mmio-bus.0 32 -> Makes -device bus= work for all virtio-mmio buses. Breaks migration. Workaround for migration from old to new: specify virtio-mmio-bus.4 or .32 respectively rather than .0 on the destination. aarch64 xilinx-zynq-a9 usb-bus.0 2 arm xilinx-zynq-a9 usb-bus.0 2 mips64el fulong2e usb-bus.0 2 -> Normal USB operation not affected. Migration driver needs command line to use the other bus. i386 isapc ide.0 2 x86_64 isapc ide.0 2 mips mips ide.0 2 mips64 mips ide.0 2 mips64el mips ide.0 2 mipsel mips ide.0 2 ppc g3beige ide.0 2 ppc mac99 ide.0 2 ppc prep ide.0 2 ppc64 g3beige ide.0 2 ppc64 mac99 ide.0 2 ppc64 prep ide.0 2 -> Makes -device bus= work for all IDE buses. Breaks migration. Workaround for migration from old to new: specify ide.1 rather than ide.0 on the destination. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05elf-loader: add more return codesAlexey Kardashevskiy2-5/+20
The existing load_elf() just returns -1 if it fails to load ELF. However it could be smarter than this and tell more about the failure such as wrong endianness or incompatible platform. This adds additional return codes for wrong architecture, wrong endianness and if the image is not ELF at all. This adds a load_elf_strerror() helper to convert return codes into string messages. This fixes handling of what load_elf() returns for s390x, other callers just check the return value for <0 and this remains unchanged. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add ISA2.06 divde[o] InstructionsTom Musta1-0/+14
This patch adds the Divide Doubleword Extended instructions. The implementation builds on the unsigned helper provided in the previous patch. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Add ISA2.06 divdeu[o] InstructionsTom Musta1-0/+14
This patch adds the Divide Doubleword Extended Unsigned instructions. This instruction requires dividing a 128-bit value by a 64 bit value. Since 128 bit integer division is not supported in TCG, a helper is used. An architecture independent 128-bit division routine is added to host-utils. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> [agraf: use ||] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05kvm: Add a new machine option kvm-typeAneesh Kumar K.V4-3/+6
Targets like ppc64 support different types of KVM, one which use hypervisor mode and the other which doesn't. Add a new machine option kvm-type that helps in selecting the respective ones We also add a new QEMUMachine callback get_vm_type that helps in mapping the string representation of kvm type specified. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [agraf: spelling fixes, use error_report(), use qemumachine.h] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05KVM: Split QEMUMachine typedef into separate headerAlexander Graf5-2/+20
Older gcc versions (such as the one in SLES11) get confused when you declare a typedef on the same struct twice. To work around that limitation, let's extract the QEMUMachine typedef into a separate header file that is guarded by preprocessor duplicate include checks. This fixes the following type of compile errors for me: In file included from vl.c:125: include/hw/xen/xen.h:39: error: redefinition of typedef "QEMUMachine" include/sysemu/kvm.h:155: error: previous declaration of "QEMUMachine" was here Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-04Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-03-04' ↵Peter Maydell3-7/+7
into staging trivial patches for 2014-03-04 # gpg: Signature made Tue 04 Mar 2014 06:13:56 GMT using RSA key ID 74F0C838 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838 * remotes/mjt/tags/trivial-patches-2014-03-04: vl: Remove unneeded include file qga: Remove unneeded include file qemu-img: Remove unneeded include files exec: Remove unneeded include files util/iov: Use qemu/sockets.h instead of conditional code qjson.h: Remove spurious GCC_FMT_ATTR markup from qobject_from_json() declaration tests/test-int128: Don't use __noclone__ attribute on clang stubs: Optimize dependencies for gdbstub.c tcg: Fix typo in comment (dependancies -> dependencies) bswap: Modify prototypes of st[wl]_{le, be}_p (avoid type conversions) bswap: Modify prototype of stb_p (avoid type conversions) object: Report type in error when not user creatable. include/qemu/host-utils.h: Trivial typo: ctz->cto Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell3-2/+141
* remotes/qmp-unstable/queue/qmp: (32 commits) qapi: Add missing null check to opts_start_struct() qapi: Clean up superfluous null check in qapi_dealloc_type_str() qapi: Clean up null checking in generated visitors qapi: Drop unused code in qapi-commands.py qapi: Drop nonsensical header guard in generated qapi-visit.c qapi: Fix licensing of scripts tests/qapi-schema: Cover flat union types tests/qapi-schema: Cover union types with base tests/qapi-schema: Cover complex types with base tests/qapi-schema: Cover anonymous union types tests/qapi-schema: Cover simple argument types tests/qapi-schema: Cover optional command arguments tests/qapi-schema: Actually check successful QMP command response monitor: Remove left-over code in do_info_profile. qerror: Improve QERR_DEVICE_NOT_ACTIVE message qmp: Check for returned data from __json_read in get_events dump: add 'query-dump-guest-memory-capability' command Define the architecture for compressed dump format dump: make kdump-compressed format available for 'dump-guest-memory' dump: add API to write dump pages ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' ↵Peter Maydell3-24/+52
into staging Several features, fixes and cleanups for kvm/s390: - sclp event facility: cleanup structure. This allows to use realize/unrealize as well as migration support via vmsd - reboot: Two fixes that make reboot much more reliable - ipl: make elf loading more robust - flic interrupt controller: This allows to migrate floating interrupts, as well as clear them on reset etc. - enable async_pf feature of KVM on s390 - several sclp fixes and cleanups - several sigp fixes and cleanups * remotes/borntraeger/tags/kvm-s390-20140227: (22 commits) s390x/ipl: Fix crash of ELF images with arbitrary entry points s390x/kvm: Rework priv instruction handlers s390x/kvm: Add missing SIGP CPU RESET order s390x/kvm: Rework SIGP INITIAL CPU RESET handler s390x/cpu: Use ioctl to reset state in the kernel s390-ccw.img: new binary rom to match latest fixes s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx s390x/event-facility: exploit realize/unrealize s390x/event-facility: add support for live migration s390x/event-facility: code restructure s390x/event-facility: some renaming s390x/sclp: Fixed setting of condition code register s390x/sclp: Add missing checks to SCLP handler s390x/sclp: Fixed the size of sccb and code parameter s390x/eventfacility: mask out commands s390x/virtio-hcall: Specification exception for illegal subcodes s390x/virtio-hcall: Add range check for hypervisor call s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler s390x/async_pf: Check for apf extension and enable pfault ... Conflicts: linux-headers/linux/kvm.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/bonzini/scsi-next' into stagingPeter Maydell1-1/+3
* remotes/bonzini/scsi-next: block/iscsi: fix segfault if writesame fails scsi-disk: Add support for port WWN and index descriptors in VPD page 83h block/iscsi: query for supported VPD pages block/iscsi: fix deadlock on scsi check condition scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b scsi: report thin provisioning errors with werror=report scsi: Change scsi sense buf size to 252 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into stagingPeter Maydell2-0/+3
* remotes/mcayland/qemu-sparc: sun4m: Add Sun CG3 framebuffer initialisation function sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM sun4m: fix slavio timer RUN/STOP bit sun4m: Set HostID in NVRAM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-03qjson.h: Remove spurious GCC_FMT_ATTR markup from qobject_from_json() ↵Peter Maydell1-1/+1
declaration The function qobject_from_json() doesn't actually allow its argument to be a format string -- it passes a NULL va_list* to qobject_from_jsonv(), and the parser code will then never actually interpret %-escape sequences (it tests whether the va_list pointer is NULL and will stop with a parse error). The spurious attribute markup causes clang warnings in some of the test cases where we programmatically construct JSON to feed to qobject_from_json(): tests/test-qmp-input-visitor.c:76:35: warning: format string is not a string literal (potentially insecure) [-Wformat-security] data->obj = qobject_from_json(json_string); ^~~~~~~~~~~ Remove the incorrect attribute. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-02bswap: Modify prototypes of st[wl]_{le, be}_p (avoid type conversions)Stefan Weil1-4/+4
The functions use uint16_t or uint32_t values, so show this in the function prototypes. Non-optimizing compilers will avoid unnecessary type conversions when generating calls of these inline functions. stq_le_p, stq_be_p already use similar prototypes. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-02bswap: Modify prototype of stb_p (avoid type conversions)Stefan Weil1-1/+1
The function uses an uint8_t value, so show this in the function prototype. Non-optimizing compilers will avoid unnecessary type conversions from (u)int8_t to int and back to uint8_t when generating calls of this inline function. stw_p, stl_p and stq_p already use similar prototypes. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-02include/qemu/host-utils.h: Trivial typo: ctz->ctoDr. David Alan Gilbert1-1/+1
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-28qerror: Improve QERR_DEVICE_NOT_ACTIVE messageHani Benhabiles1-1/+1
The error message as currently used is confusing as there are no "balloon" or "spice" devices. (qemu) balloon 1024 balloon: Device 'balloon' has not been activated With this patch: (qemu) balloon 1024 balloon: No balloon device has been activated Signed-off-by: Hani Benhabiles <hani@linux.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add API to write dump pagesqiaonuohan1-0/+7
functions are used to write page to vmcore. vmcore is written page by page. page desc is used to store the information of a page, including a page's size, offset, compression format, etc. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add APIs to operate DataCacheqiaonuohan1-0/+9
DataCache is used to store data temporarily, then the data will be written to vmcore. These functions will be called later when writing data of page to vmcore. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add API to write dump_bitmapqiaonuohan1-0/+2
functions are used to write 1st and 2nd dump_bitmap of kdump-compressed format, which is used to indicate whether the corresponded page is existed in vmcore. 1st and 2nd dump_bitmap are same, because dump level is specified to 1 here. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add API to write dump headerqiaonuohan1-0/+96
the functions are used to write header of kdump-compressed format to vmcore. Header of kdump-compressed format includes: 1. common header: DiskDumpHeader32 / DiskDumpHeader64 2. sub header: KdumpSubHeader32 / KdumpSubHeader64 3. extra information: only elf notes here Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add members to DumpState and init some of themqiaonuohan1-0/+7
add some members to DumpState that will be used in writing vmcore in kdump-compressed format. some of them, like page_size, will be initialized in the patch. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: add API to write header of flatten formatqiaonuohan1-0/+17
flatten format will be used when writing kdump-compressed format. The format is also used by makedumpfile, you can refer to the following URL to get more detailed information about flatten format of kdump-compressed format: http://sourceforge.net/projects/makedumpfile/ The two functions here are used to write start flat header and end flat header to vmcore, and they will be called later when flatten format is used. struct MakedumpfileHeader stored at the head of vmcore is used to indicate the vmcore is in flatten format. struct MakedumpfileHeader { char signature[16]; /* = "makedumpfile" */ int64_t type; /* = 1 */ int64_t version; /* = 1 */ }; And struct MakedumpfileDataHeader, with offset and buf_size set to -1, is used to indicate the end of vmcore in flatten format. struct MakedumpfileDataHeader { int64_t offset; /* = -1 */ int64_t buf_size; /* = -1 */ }; Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: const-qualify the buf of WriteCoreDumpFunctionqiaonuohan1-1/+2
WriteCoreDumpFunction is a function pointer that points to the function used to write content in "buf" into core file, so "buf" should be const-qualify. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-27sun4m: Add Sun CG3 framebuffer initialisation functionMark Cave-Ayland1-0/+1
In order to allow the user to choose the framebuffer for sparc-softmmu, add -vga tcx and -vga cg3 options to the QEMU command line. If no option is specified, the default TCX framebuffer is used. Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the validation rules to allow both displays to be initiated at the higher resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to the normal QEMU sun4m default resolution of 1024x768). Finally move any fprintf(stderr ...) statements in the areas affected by this patch over to the new error_report() function. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27sun4m: Set HostID in NVRAMMark Cave-Ayland1-0/+2
On SparcStations, the HostID field in the NVRAM is equal to the last three bytes of the MAC address (which is also stored in the NVRAM). This constant is used as an identification/serial number on Solaris. Signed-off-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-02-27s390x/event-facility: code restructureHeinz Graalfs2-24/+19
Code restructure in order to simplify class hierarchy - remove S390SCLPDevice abstract base class and move function pointers into new SCLPEventFacilityClass - implement SCLPEventFacility as SysBusDevice - use define constants for instance creation strings The following ascii-art shows the class structure wrt the SCLP EventFacility before (CURRENT) and after the restructure (NEW): ---- CURRENT: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacility | - to be replaced by new SCLPEventFacility, |-------------------------| which will be a SysBusDevice |SCLPEventsBus sbus | |DeviceState *qdev | |unsigned int receive_mask| +-------------------------+ +-------------------------+ | S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass |-------------------------| |DeviceClass qdev | |*(init)() | +-------------------------+ "s390-sclp-event-facility" | instance-of | V "s390-sclp-device" - this is an abstract class +-------------------------+ | S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility |-------------------------| |SysBusDevice busdev | |SCLPEventFacility *ef | | | |*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass |*(event_pending)() | +-------------------------+ ---- NEW: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacilityClass | |-------------------------| |DeviceClass parent_class | | | |*(init)() | |*(command_handler)() | |*(event_pending)() | +-------------------------+ "s390-sclp-event-facility" +-------------------------+ | SCLPEventFacility | |-------------------------| |SysBusDevice parent_class| |SCLPEventsBus sbus | |unsigned int receive_mask| +-------------------------+ Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/kvm: implement floating-interrupt controller deviceJens Freimann1-0/+33
This patch implements a floating-interrupt controller device (flic) which interacts with the s390 flic kvm_device. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-26Merge remote-tracking branch ↵Peter Maydell3-2/+37
'remotes/pmaydell/tags/pull-target-arm-20140226' into staging target-arm queue: * fixes for various Coverity-spotted bugs * support new KVM device control API for VGIC * support KVM VGIC save/restore/migration * more AArch64 system mode foundations * support ARMv8 CRC instructions for A32/T32 * PL330 minor fixes and cleanup # gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits) dma/pl330: implement dmaadnh instruction dma/pl330: Fix buffer depth dma/pl330: Add event debugging printfs dma/pl330: Rename parent_obj dma/pl330: printf format type sweep. dma/pl330: Fix misleading type dma/pl330: Delete overly verbose debug printf target-arm: Add support for AArch32 ARMv8 CRC32 instructions include/qemu/crc32c.h: Rename include guards to match filename target-arm: Add utility function for checking AA32/64 state of an EL target-arm: Implement AArch64 view of CPACR target-arm: A64: Implement MSR (immediate) instructions target-arm: Store AIF bits in env->pstate for AArch32 target-arm: A64: Implement WFI target-arm: Get MMU index information correct for A64 code target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI target-arm: Implement AArch64 dummy breakpoint and watchpoint registers target-arm: Implement AArch64 ID and feature registers target-arm: Implement AArch64 generic timers target-arm: Implement AArch64 MPIDR ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140225' ↵Peter Maydell1-1/+1
into staging migration/next for 20140225 # gpg: Signature made Tue 25 Feb 2014 14:04:31 GMT using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140225: rdma: rename 'x-rdma' => 'rdma' Fix two XBZRLE corruption issues Fix vmstate_info_int32_le comparison/assign qemu_file: use fwrite() correctly Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell2-6/+19
staging Net patches # gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/net-pull-request: virtio-net: use qemu_get_queue() where possible vhost_net: use offload API instead of bypassing it net: remove implicit peer from offload API net: Disable netmap backend when not supported net: add offloading support to netmap backend net: make tap offloading callbacks static net: virtio-net and vmxnet3 use offloading API net: TAP uses NetClientInfo offloading callbacks net: extend NetClientInfo for offloading net: change vnet-hdr TAP prototypes opencores_eth: flush queue whenever can_receive can go from false to true Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26include/qemu/crc32c.h: Rename include guards to match filenameWill Newton1-2/+2
Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393411566-24104-2-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26arm: vgic device control api supportChristoffer Dall1-0/+1
Support creating the ARM vgic device through the device control API and setting the base address for the distributor and cpu interfaces in KVM VMs using this API. Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be created prior to creating the VCPUs, we first test if we can use the device control API in kvm_arch_irqchip_create (using the test flag from the device control API). If we cannot, it means we have to fall back to KVM_CREATE_IRQCHIP and use the older ioctl at this point in time. If however, we can use the device control API, we don't do anything and wait until the arm_gic_kvm driver initializes and let that use the device control API. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Common device control API functionsChristoffer Dall1-0/+22
Introduces two simple functions: int kvm_device_ioctl(int fd, int type, ...); int kvm_create_device(KVMState *s, uint64_t type, bool test); These functions wrap the basic ioctl-based interactions with KVM in a way similar to other KVM ioctl wrappers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Introduce kvm_arch_irqchip_createChristoffer Dall1-0/+12
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation for architecture-specific use of the device control API to create IRQ chips. Following patches will implement the ARM irqchip create method to prefer the device control API over the older KVM_CREATE_IRQCHIP API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26xilinx: Delete hw/include/xilinx.hPeter Crosthwaite1-10/+0
This is now obsolete - remove the header and all its inclusions. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_axi*_init()Peter Crosthwaite1-33/+0
Inline the only usage of each of xilinx_axiethernet_init and xilinx_axidma_init. Converts this init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usage of xilinx_ethlite_create()Peter Crosthwaite1-19/+0
Inline the only usage. Converts this init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_timer_create()Peter Crosthwaite1-15/+0
Inline these usages. Converts these init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_intc_create()Peter Crosthwaite1-13/+0
Inline these usages. Converts these init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-25net: remove implicit peer from offload APIStefan Hajnoczi1-7/+7
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap device). The API was defined to implicitly use nc->peer, saving the caller the trouble. This wasn't ideal because: 1. There are callers who have the peer but not the NIC. Currently they are forced to bypass the API and access peer->info->... directly. 2. The rest of the net.h API uses nc, not nc->peer, so it is inconsistent. This patch pushes nc->peer back up to callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25Fix two XBZRLE corruption issuesDr. David Alan Gilbert1-1/+1
Push zero'd pages into the XBZRLE cache A page that was cached by XBZRLE, zero'd and then XBZRLE'd again was being compared against a stale cache value Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache Since the cache might change before the data hits the wire Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-25net: make tap offloading callbacks staticVincenzo Maffione1-6/+0
Since TAP offloadings are manipulated through a new API, it's not necessary to export them in include/net/tap.h anymore. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: extend NetClientInfo for offloadingVincenzo Maffione1-0/+19
Some new callbacks have been added to generalize the operations done by virtio-net and vmxnet3 frontends to manipulate TAP offloadings. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: change vnet-hdr TAP prototypesVincenzo Maffione1-2/+2
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used to return int, even though they only return true/false values. This patch changes the prototypes to return bool. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell5-12/+13
Block patches # gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (54 commits) iotests: Mixed quorum child device specifications quorum: Simplify quorum_open() quorum: Add unit test. quorum: Add quorum_open() and quorum_close(). quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum. quorum: Add quorum_co_flush(). quorum: Add quorum_invalidate_cache(). quorum: Add quorum_getlength(). quorum: Add quorum mechanism. quorum: Add quorum_aio_readv. blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify. quorum: Add quorum_aio_writev and its dependencies. quorum: Create BDRVQuorumState and BlkDriver and do init. quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB. check-qdict: Test termination of qdict_array_split() check-qdict: Adjust test for qdict_array_split() qdict: Extract non-QDicts in qdict_array_split() qemu-config: Sections must consist of keys qemu-iotests: Check qemu-img command line parsing qemu-img: Allow -o help with incomplete argument list ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-24Merge remote-tracking branch 'remotes/sstabellini/xen-140220' into stagingPeter Maydell1-0/+1
* remotes/sstabellini/xen-140220: xen_disk: fix io accounting Call pci_piix3_xen_ide_unplug from unplug_disks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-24Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell3-2/+32
* remotes/bonzini/configure: build: softmmu targets do not have a "main.o" file configure: Disable libtool if -fPIE does not work with it (bug #1257099) block: convert block drivers linked with libs to modules Makefile: introduce common-obj-m and block-obj-m for DSO Makefile: install modules with "make install" module: implement module loading rules.mak: introduce DSO rules darwin: do not use -mdynamic-no-pic block: use per-object cflags and libs rules.mak: allow per object cflags and libs rules.mak: fix $(obj) to a real relative path util: Split out exec_dir from os_find_datadir Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-22scsi: report thin provisioning errors with werror=reportPaolo Bonzini1-0/+2
SCSI defines a status code for when a thin-provisioned LUNs would exceed the allocated space, map ENOSPC to it. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22scsi: Change scsi sense buf size to 252Fam Zheng1-1/+1
Current buffer size fails the assersion check in like hw/scsi/scsi-bus.c:1655: assert(req->sense_len <= sizeof(req->sense)); when backend (block/iscsi.c) returns more data then 96. Exercise the core dump path by booting an Gentoo ISO with scsi-generic device backed with iscsi (built with libiscsi 1.7.0): x86_64-softmmu/qemu-system-x86_64 \ -drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \ -device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \ -device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \ -boot d \ -cdrom gentoo.iso qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete: Assertion `req->sense_len <= sizeof(req->sense)' failed. According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So increase the value to fix it. Also remove duplicated define for the macro. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-21quorum: Add quorum mechanism.Benoît Canet1-0/+2
This patchset enables the core of the quorum mechanism. The num_children reads are compared to get the majority version and if this version exists more than threshold times the guest won't see the error at all. If a block is corrupted or if an error occurs during an IO or if the quorum cannot be established QMP events are used to report to the management. Use gnutls's SHA-256 to compare versions. --enable-quorum must be used to enable the feature. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 16:54:58 +0000