summaryrefslogtreecommitdiff
path: root/hw/scsi-generic.c
AgeCommit message (Collapse)AuthorFilesLines
2010-11-25scsi: Return SAM status codesHannes Reinecke1-5/+5
Traditionally, the linux stack is using SCSI status codes which are shifted by one as compared to those defined in SAM. A SCSI emulation should naturally return the SAM defined codes, not the linux ones. So to avoid any confusion this patch modifies the existing definitions to match those found in SAM and removes any (now obsolete) byte-shift from the returned status codes. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-21scsi-generic: add missing reset handlerBernhard Kohl1-2/+19
Ensure that pending requests of a SCSI generic device are purged on system reset. This also avoids calling a NULL function in lsi53c895a. The lsi code was recently changed to call the .qdev.reset function. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-09-08scsi: fix and improve debug printsBernhard Kohl1-4/+14
Some of them are not compile clean. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-24Rearrange block headersBlue Swirl1-0/+1
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06scsi: Reject unimplemented error actionsMarkus Armbruster1-0/+9
drive_init() doesn't permit rerror for if=scsi, but that's worthless: we get it via if=none and -device. Moreover, scsi-generic doesn't support werror. Since drive_init() doesn't catch that, option werror was silently ignored even with if=scsi. Wart: unlike drive_init(), we don't reject the default action when it's explicitly specified. That's because we can't distinguish "no rerror option" from "rerror=report", or "no werror" from "rerror=enospc". Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02block: Fix virtual media change for if=noneMarkus Armbruster1-0/+1
BlockDriverState member removable controls whether virtual media change (monitor commands change, eject) is allowed. It is set when the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY. The type hint is only set by drive_init(). It sets BDRV_TYPE_FLOPPY for if=floppy. It sets BDRV_TYPE_CDROM for media=cdrom and if=ide, scsi, xen, or none. if=ide and if=scsi work, because the type hint makes it a CD-ROM. if=xen likewise, I think. For the same reason, if=none works when it's used by ide-drive or scsi-disk. For other guest devices, there are problems: * fdc: you can't change virtual media $ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo QEMU 0.12.50 monitor - type 'help' for more information (qemu) eject foo Device 'foo' is not removable unless you add media=cdrom, but that makes it readonly. * virtio: if you add media=cdrom, you can change virtual media. If you eject, the guest gets I/O errors. If you change, the guest sees the drive's contents suddenly change. * scsi-generic: if you add media=cdrom, you can change virtual media. I didn't test what that does to the guest or the physical device, but it can't be pretty. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-3/+3
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02blockdev: Clean up automatic drive deletionMarkus Armbruster1-1/+1
We automatically delete blockdev host parts on unplug of the guest device. Too much magic, but we can't change that now. The delete happens early in the guest device teardown, before the connection to the host part is severed. Thus, the guest part's pointer to the host part dangles for a brief time. No actual harm comes from this, but we'll catch such dangling pointers a few commits down the road. Clean up the dangling pointers by delaying the automatic deletion until the guest part's pointer is gone. Device usb-storage deliberately makes two qdev properties refer to the same drive, because it automatically creates a second device. Again, too much magic we can't change now. Multiple references worked okay before, but now free_drive() dies for the second one. Zap the extra reference. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-1/+0
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-4/+4
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16error: Move qemu_error & friends into their own headerMarkus Armbruster1-0/+1
2010-02-10block: add topology qdev propertiesChristoph Hellwig1-11/+13
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move status to SCSIRequest.Gerd Hoffmann1-10/+8
Also add and use the scsi_req_complete() helper function for calling the completion callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move dinfo to SCSIDeviceGerd Hoffmann1-12/+11
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add xfer modeGerd Hoffmann1-39/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add request parsing helpers to common code.Gerd Hoffmann1-132/+24
Add helper functions for scsi request parsing to common code. Getting command length, transfer size, and linear block address is handled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move type from SCSIGenericState to SCSIDeviceGerd Hoffmann1-7/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi-defs.hGerd Hoffmann1-7/+1
Largely based on <scsi/scsi.h> from linux. Added into the tree so we can use the defines everywhere, not just in scsi-generic.c (which is linux-specific). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move blocksize from SCSIGenericState to SCSIDeviceGerd Hoffmann1-12/+11
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move scsi command buffer from SCSIGenericReq to SCSIRequest.Gerd Hoffmann1-9/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move SCSIRequest management to common code.Gerd Hoffmann1-21/+8
Create generic functions to allocate, find and release SCSIRequest structs. Make scsi-disk and scsi-generic use them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move request lists to QTAILQ.Gerd Hoffmann1-60/+16
Changes: * Move from open-coded lists to QTAILQ macros. * Move the struct elements to the common data structures (SCSIDevice + SCSIRequest). * Drop free request pools. * Fix request cleanup in the destroy callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: create common SCSIRequest structure.Gerd Hoffmann1-52/+52
Rename the SCSIRequest structs in scsi-disk.c and scsi-generic.c to SCSIDiskReq and SCSIGenericReq. Create a SCSIRequest struct and move the common elements over. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02Fix qemu_free use in scsi-generic.cJean-Christophe DUBOIS1-2/+2
scsi-generic.c is using free() instead of qemu_free(). Fix it. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09scsi: move scsi-disk.h -> scsi.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann1-0/+2
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Implement scsi device destructionGerd Hoffmann1-2/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann1-68/+77
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl1-5/+5
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-03-28new scsi-generic abstraction, use SG_IO (Christoph Hellwig)aliguori1-39/+3
Okay, I started looking into how to handle scsi-generic I/O in the new world order. I think the best is to use the SG_IO ioctl instead of the read/write interface as that allows us to support scsi passthrough on disk/cdrom devices, too. See Hannes patch on the kvm list from August for an example. Now that we always do ioctls we don't need another abstraction than bdrv_ioctl for the synchronous requests for now, and for asynchronous requests I've added a aio_ioctl abstraction keeping it simple. Long-term we might want to move the ops to a higher-level abstraction and let the low-level code fill out the request header, but I'm lazy enough to leave that to the people trying to support scsi-passthrough on a non-Linux OS. Tested lightly by issuing various sg_ commands from sg3-utils in a guest to a host CDROM device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6895 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-12Add specialized block driver scsi generic API (Avi Kivity)aliguori1-17/+22
When a scsi device is backed by a scsi generic device instead of an ordinary host block device, the block API is abused in a couple of annoying ways: - nb_sectors is negative, and specifies a byte count instead of a sector count - offset is ignored, since scsi-generic is essentially a packet protocol This overloading makes hacking the block layer difficult. Remove it by introducing a new explicit API for scsi-generic devices. The new API is still backed by the old implementation, but at least the users are insulated. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6822 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-17scsi-generic: correct error managementaurel321-29/+103
this patch allows to fully use a tape device connected to qemu through the scsi-generic interface. Previous patch introduced tape SCSI commands management, this one improve error case management: - the SCSI controller command completion must be called with the status value, not the sense value. In the case of scsi-generic, the SCSI status is given by the field status of sg_io_hdr_t (the value is left shifted by one regarding status codes defined in /usr/include/scsi/scsi.h) - when a read is aborted due to a mark/EOF/EOD/EOM, the len reported to controller can be 0. LSI controller emulation doesn't know how to manage this. A workaround found is to call the completion routine with SCSI_REASON_DONE just after calling it with SCSI_REASON_DATA with len=0. This patch also manages correctly the block size of the tape device. This patch has been tested with a real tape device "HP C5683A", linux guest (debian etch) and tools like "mt", "tar" and "btape". Windows guest is not better supported than before... Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5497 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-23scsi-generic: decode correctly SCSI tape commands (Laurent Vivier)aliguori1-9/+54
This patch allows to use a "real" SCSI tape with qemu using "-drive /dev/sgX,if=scsi". It allows to decode correctly transfer length when the type of the device is a tape. Some issues remain when the application reading the tape tries to go beyond the end of the stream (but they must be corrected at the SCSI controller level). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5305 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-22scsi-generic: correct 6-bytes commands transfer length (Laurent Vivier)aliguori1-0/+3
According to SCSI documentation, for 6 bytes commands (READ(6), WRITE(6)), if transfer length is 0 it specifies 256 blocks. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5292 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-22scsi-generic: correct usage of memset() (Laurent Vivier)aliguori1-2/+2
void *memset(void *s, int c, size_t n); DESCRIPTION The memset() function fills the first n bytes of the memory area pointed to by s with the constant byte c." Reported by Dietmar Maurer. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5291 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-02suppress a couple of spurious warnings in scsi-generic.caurel321-2/+2
This patch fixes two spurious `may be used uninitialised' warnings when compiling with some compilers. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5127 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-24scsi-generic implemnentation, missing in last commit.ths1-0/+653
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3852 c046a42c-6fe2-441c-8c8c-71466251a162