summaryrefslogtreecommitdiff
path: root/hw/pci/msix.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-02msix: make msix_clr_pending() visible for clientsDmitry Fleytman1-1/+1
This function will be used by e1000e device code. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-11msi_supported -> msi_nonbrokenMichael S. Tsirkin1-1/+1
Rename controller flag to make it clearer what it means. Add some documentation as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-16msix: fix msix_vector_maskedMichael S. Tsirkin1-2/+2
commit 428c3ece97179557f2753071fb0ca97a03437267 ("fix MSI injection on Xen") inadvertently enabled the xen-specific logic unconditionally. Limit it to only when xen is enabled. Additionally, msix data should be read with pci_get_log since the format is pci little-endian. Reported-by: "Daniel P. Berrange" <berrange@redhat.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06fix MSI injection on XenStefano Stabellini1-2/+10
On Xen MSIs can be remapped into pirqs, which are a type of event channels. It's mostly for the benefit of PCI passthrough devices, to avoid the overhead of interacting with the emulated lapic. However remapping interrupts and MSIs is also supported for emulated devices, such as the e1000 and virtio-net. When an interrupt or an MSI is remapped into a pirq, masking and unmasking is done by masking and unmasking the event channel. The masking bit on the PCI config space or MSI-X table should be ignored, but it isn't at the moment. As a consequence emulated devices which use MSI or MSI-X, such as virtio-net, don't work properly (the guest doesn't receive any notifications). The mechanism was working properly when xen_apic was introduced, but I haven't narrowed down which commit in particular is causing the regression. Fix the issue by ignoring the masking bit for MSI and MSI-X which have been remapped into pirqs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-29pci: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
2015-10-24msix: implement pba write (but read-only)Marc-André Lureau1-0/+6
qpci_msix_pending() writes on pba region, causing qemu to SEGV: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffff7fba8c0 (LWP 25882)] 0x0000000000000000 in ?? () (gdb) bt #0 0x0000000000000000 in () #1 0x00005555556556c5 in memory_region_oldmmio_write_accessor (mr=0x5555579f3f80, addr=0, value=0x7fffffffbf68, size=4, shift=0, mask=4294967295, attrs=...) at /home/elmarco/src/qemu/memory.c:434 #2 0x00005555556558e1 in access_with_adjusted_size (addr=0, value=0x7fffffffbf68, size=4, access_size_min=1, access_size_max=4, access=0x55555565563e <memory_region_oldmmio_write_accessor>, mr=0x5555579f3f80, attrs=...) at /home/elmarco/src/qemu/memory.c:506 #3 0x00005555556581eb in memory_region_dispatch_write (mr=0x5555579f3f80, addr=0, data=0, size=4, attrs=...) at /home/elmarco/src/qemu/memory.c:1176 #4 0x000055555560b6f9 in address_space_rw (as=0x555555eff4e0 <address_space_memory>, addr=3759147008, attrs=..., buf=0x7fffffffc1b0 "", len=4, is_write=true) at /home/elmarco/src/qemu/exec.c:2439 #5 0x000055555560baa2 in cpu_physical_memory_rw (addr=3759147008, buf=0x7fffffffc1b0 "", len=4, is_write=1) at /home/elmarco/src/qemu/exec.c:2534 #6 0x000055555564c005 in cpu_physical_memory_write (addr=3759147008, buf=0x7fffffffc1b0, len=4) at /home/elmarco/src/qemu/include/exec/cpu-common.h:80 #7 0x000055555564cd9c in qtest_process_command (chr=0x55555642b890, words=0x5555578de4b0) at /home/elmarco/src/qemu/qtest.c:378 #8 0x000055555564db77 in qtest_process_inbuf (chr=0x55555642b890, inbuf=0x55555641b340) at /home/elmarco/src/qemu/qtest.c:569 #9 0x000055555564dc07 in qtest_read (opaque=0x55555642b890, buf=0x7fffffffc2e0 "writel 0xe0100800 0x0\n", size=22) at /home/elmarco/src/qemu/qtest.c:581 #10 0x000055555574ce3e in qemu_chr_be_write (s=0x55555642b890, buf=0x7fffffffc2e0 "writel 0xe0100800 0x0\n", len=22) at qemu-char.c:306 #11 0x0000555555751263 in tcp_chr_read (chan=0x55555642bcf0, cond=G_IO_IN, opaque=0x55555642b890) at qemu-char.c:2876 #12 0x00007ffff64c9a8a in g_main_context_dispatch (context=0x55555641c400) at gmain.c:3122 (without this patch, this can be reproduced with the ivshmem qtest) Implement an empty mmio write to avoid the crash. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07hw/pci: Use pow2ceil() rather than hand-calculationPeter Maydell1-3/+1
A couple of places in hw/pci use an inline calculation to round a size up to the next largest power of 2. We have a utility routine for this, so use it. (The behaviour of the old code is different if the size value is 0 -- it would leave it as 0 rather than rounding up to 1, but in both cases we know the size can't be 0. In the case where the size value had bit 31 set, the old code would invoke undefined behaviour; the new code will give a result of 0. Presumably that could never happen either.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1437741192-20955-2-git-send-email-peter.maydell@linaro.org
2015-05-31Add stream ID to MSI writePavel Fedin1-2/+1
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus. This patch implements passing these IDs in qemu. SMMU is also known to use stream IDs, therefore this addition can also be useful for implementing platforms with SMMU. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Changes from v1: - Added bus number to the stream ID - Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into msi_send_message() function. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-11Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-11/+19
pc, virtio enhancements Memory hot-unplug support for pc, MSI-X mapping update speedup for virtio-pci, misc refactorings and bugfixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) acpi: update expected files for memory unplug virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net pci: Merge pci_nic_init() into pci_nic_init_nofail() acpi: add a missing backslash to the \_SB scope. qmp-event: add event notification for memory hot unplug error acpi: add hardware implementation for memory hot unplug acpi: fix "Memory device control fields" register acpi: extend aml_field() to support UpdateRule acpi, mem-hotplug: add unplug cb for memory device acpi, mem-hotplug: add unplug request cb for memory device acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus docs: update documentation for memory hot unplug virtio: coding style tweak pci: remove hard-coded bar size in msix_init_exclusive_bar() virtio-pci: speedup MSI-X masking and unmasking virtio: introduce vector to virtqueues mapping virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue monitor: check return value of qemu_find_net_clients_except() monitor: replace the magic number 255 with MAX_QUEUE_NUM ... Conflicts: hw/s390x/s390-virtio-bus.c [PMM: fixed conflict in s390_virtio_scsi_properties and s390_virtio_net_properties arrays; since the result of the two conflicting patches is to empty the property arrays completely, the conflict resolution is to remove them entirely.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27pci: remove hard-coded bar size in msix_init_exclusive_bar()Jason Wang1-11/+19
This patch lets msix_init_exclusive_bar() can calculate the bar and pba size based on the number of MSI-X vectors other than using a hard-coded limit 4096. This is needed to allow device to have more than 128 MSI_X vectors. To keep migration compatibility, keep using 4096 as bar size and 2048 for pba offset. Notes: We don't care about the case that using vectors > 128 for legacy machine type. Since we limit the queue max to 64, so vectors >= 65 is meaningless. Virtio device will be the first user for this. Cc: Keith Busch <keith.busch@intel.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-26Switch non-CPU callers from ld/st*_phys to address_space_ld/st*Peter Maydell1-1/+2
Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2014-08-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-4/+0
SCSI changes that enable sending vendor-specific commands via virtio-scsi. Memory changes for QOMification and automatic tracking of MR lifetime. # gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: mtree: remove write-only field memory: Use canonical path component as the name memory: Use memory_region_name for name access memory: constify memory_region_name exec: Abstract away ref to memory region names loader: Abstract away ref to memory region names tpm_tis: remove instance_finalize callback memory: remove memory_region_destroy memory: convert memory_region_destroy to object_unparent ioport: split deletion and destruction nic: do not destroy memory regions in cleanup functions vga: do not dynamically allocate chain4_alias sysbus: remove unused function sysbus_del_io qom: object: move unparenting to the child property's release callback qom: object: delete properties before calling instance_finalize virtio-scsi: implement parse_cdb scsi-block, scsi-generic: implement parse_cdb scsi-block: extract scsi_block_is_passthrough scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo scsi-bus: prepare scsi_req_new for introduction of parse_cdb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini1-4/+0
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-14pci: Use bus master address space for delivering MSI/MSI-X messagesJan Kiszka1-1/+1
The spec says (and real HW confirms this) that, if the bus master bit is 0, the device will not generate any PCI accesses. MSI and MSI-X messages fall among these, so we should use the corresponding address space to deliver them. This will prevent delivery if bus master support is disabled. Cc: qemu-stable@nongnu.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-11exec: Make stl_*_phys input an AddressSpaceEdgar E. Iglesias1-1/+1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-07-04hw/p*: pass owner to memory_region_init* functionsPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03pci: add VMSTATE_MSIXGerd Hoffmann1-0/+33
Using a trick cut+pasted from vmstate_scsi_device to wind up msix_save and msix_load. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-07msix: add api to access msix messageMichael S. Tsirkin1-1/+1
Will be used by virtio pci. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26msix: expose access to masked/pending stateMichael S. Tsirkin1-3/+3
For use by poll handler. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-26msi: add API to get notified about pending bit pollMichael S. Tsirkin1-1/+12
Update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEADPaolo Bonzini1-0/+560
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: fix path for local includesMichael S. Tsirkin1-4/+4
Include dependencies from pci core using the correct path. This is required now that it's in the separate directory. Need to check whether they can be minimized, for now, keep the code as is. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: move pci core code to hw/pciMichael S. Tsirkin1-0/+562
Move files and modify makefiles to pick them at the new location. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 07:10:19 +0000