summaryrefslogtreecommitdiff
path: root/hw/isa
AgeCommit message (Collapse)AuthorFilesLines
2015-10-22hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNTLaszlo Ersek1-1/+1
Commit 4d00636e97b7 ("ich9: Add the lpc chip", Nov 14 2012) added the ich9_apm_ctrl_changed() ioport write callback function such that it would inject the SMI, in response to a write to the APM_CNT register, on the first CPU, invariably. Since this register is used by guest code to trigger an SMI synchronously, the interrupt should be injected on the VCPU that is performing the write. apm_ioport_writeb() is the .write callback of the "apm_ops" MemoryRegionOps [hw/isa/apm.c]; it is parametrized to call ich9_apm_ctrl_changed() by ich9_lpc_init() [hw/isa/lpc_ich9.c], via apm_init(). Therefore this change affects no other board. ich9_generate_smi() is an unrelated function that is called by the TCO watchdog; a watchdog is likely in its right to (asynchronously) inject interrupts on the first CPU only. This patch allows the combined edk2/OVMF SMM driver stack to work with multiple VCPUs on TCG, using both qemu-system-i386 and qemu-system-x86_64. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09i8257: remove cpu_request_exit irqPaolo Bonzini1-2/+1
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: Richard henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08ich9: implement strap SPKR pin logicPaulo Alcantara1-0/+6
If the signal is sampled high, this indicates that the system is strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system reboot feature). The status of this strap is readable via the NO_REBOOT bit (CC: offset 0x3410:bit 5). The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit may be set or cleared by software if the strap is sampled low but may not override the strap when it indicates "No Reboot". This patch implements the logic where hardware has ability to set SPKR pin through a property named "noreboot" and it's sampled high by default. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07ich9: add TCO interface emulationPaulo Alcantara1-2/+13
This interface provides some registers within a 32-byte range and can be acessed through PCI-to-LPC bridge interface (PMBASE + 0x60). It's commonly used as a watchdog timer to detect system lockups through SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If NO_REBOOT bit is not set in GCS (General Control and Status register), the system will be resetted upon second timeout if TCO_RLD register wasn't previously written to prevent timeout. This patch adds support to TCO watchdog logic and few other features like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection, etc. are not implemented yet. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-06ich9: add smm_enabled field and argumentsPaolo Bonzini1-2/+4
Q35's ACPI device is hard-coding SMM availability to KVM. Place the logic where the board is created instead, so that it will be possible to override it. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06piix4/ich9: do not raise SMI on ACPI enable/disable commandsPaolo Bonzini1-0/+3
These commands are handled entirely by QEMU. Do not raise an SMI when they happen, because Windows (at least 2008r2) expects these commands to work and (depending on the value of APMC_EN at startup) the firmware might not have installed an SMI handler. When this happens (e.g. the kernel supports SMIs, or you are using TCG, but you have used "-machine smm=off") RIP is moved to 0x38000 where there is no code to execute. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23vt82c686: QOMifyGonglei1-15/+32
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23piix4: QOMifyGonglei1-2/+6
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-16Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150615-1' into ↵Peter Maydell1-0/+3
staging virtio-gpu: pci support bits and virtio-vga. # gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150615-1: virtio-vga: add vgabios configuration virtio-vga: add '-vga virtio' support virtio-vga: add virtio gpu device with vga compatibility virtio-gpu-pci: add virtio pci support virtio-gpu: fix error message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12virtio-vga: add '-vga virtio' supportGerd Hoffmann1-0/+3
Some convinience fluff: Add support for '-vga virtio', also add virtio-vga to the list of vga cards so '-device virtio-vga' will turn off the default vga. Written by Dave Airlie and Gerd Hoffmann. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela1-6/+4
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-05ich9: implement SMI_LOCKGerd Hoffmann1-0/+19
Add write mask for the smi enable register, so we can disable write access to certain bits. Open all bits on reset. Disable write access to GBL_SMI_EN when SMI_LOCK (in ich9 lpc pci config space) is set. Write access to SMI_LOCK itself is disabled too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05Move parallel_hds_isa_init to hw/isa/isa-bus.cMiroslav Rezanina1-0/+26
Disabling CONFIG_PARALLEL cause removing parallel_hds_isa_init defined in parallel.c. This function is called during initialization of some boards so disabling CONFIG_PARALLEL cause build failure. This patch moves parallel_hds_isa_init to hw/isa/isa-bus.c so it is included in case of disabled CONFIG_PARALLEL. Build is successful but qemu will abort with "Unknown device" error when function is called. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Message-Id: <1431509970-32154-1-git-send-email-mrezanin@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-2/+2
pc, acpi, virtio, tpm This includes pxb support by Marcel, as well as multiple enhancements all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) vhost: logs sharing hw/acpi: piix4_pm_init(): take fw_cfg object no more hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4" pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size docs: Add PXB documentation apci: fix PXB behaviour if used with unsupported BIOS hw/pxb: add numa_node parameter hw/pci: add support for NUMA nodes hw/pxb: add map_irq func hw/pci: inform bios if the system has extra pci root buses hw/pci: introduce PCI Expander Bridge (PXB) hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query hw/acpi: remove from root bus 0 the crs resources used by other buses. hw/acpi: add _CRS method for extra root busses hw/apci: add _PRT method for extra PCI root busses hw/acpi: add support for i440fx 'snooping' root busses hw/pci: extend PCI config access to support devices behind PXB hw/i386: query only for q35/pc when looking for pci host bridge hw/pci: made pci_bus_num a PCIBusClass method ... Conflicts: hw/i386/pc_piix.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"Laszlo Ersek1-1/+1
This patch only modifies the function prototype and updates all chipset code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled". RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03hw/q35: fix floppy controller definition in ich9Marcel Apfelbaum1-1/+1
In DSDT FDC0 declares the IO region as IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04). Use the same in lpc_ich9 initialization code. Now the floppy drive is detected correctly on Windows. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-03hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irqShannon Zhao1-5/+2
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irqShannon Zhao1-4/+1
Since ich9_lpc_pm_init only requests one irq, so let it just call qemu_allocate_irq. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-02hw: Mark devices picking up char backends actively FIXMEMarkus Armbruster1-0/+2
Character devices defined with -serial and -parallel are for board initialization to wire up. Board code examines serial_hds[] and parallel_hds[] to find them, and creates devices with their qdev chardev properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a chardev property for board code to set: they use serial_hds[] (often via qemu_char_get_next_serial()) or parallel_hds[] in their realize() or init() method to connect to a backend. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is it inconsistent with how the other characrer device models work (they connect to a backend explicitly identified by a "chardev" property), it breaks when the backend has been picked up by the board or a previous -device / device_add already. Example: $ qemu-system-ppc64 -M bamboo -S -device i82378 -device pc87312 -device pc87312 qemu-system-ppc64: -device pc87312: Property 'isa-parallel.chardev' can't take value 'parallel0', it's in use Mark them with suitable FIXME comments. Cc: Li Guang <lig.fnst@cn.fujitsu.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02hw: Mark devices picking up block backends actively FIXMEMarkus Armbruster1-0/+2
Drives defined with if!=none are for board initialization to wire up. Board code calls drive_get() or similar to find them, and creates devices with their qdev drive properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a drive property for board code to set: they call driver_get() or drive_get_next() in their realize() or init() method to implicitly connect to the "next" backend with a certain interface type. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is this inconsistent with how the other block device models work (they connect to a backend explicitly identified by a "drive" property), it breaks when the "next" backend has been picked up by the board already. Example: $ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd Aborted (core dumped) Mark them with suitable FIXME comments. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-26acpi, ich9: Add unplug cb for ich9.Tang Chen1-0/+9
Memory and CPU hot unplug are both asynchronous procedures. When the unplug operation happens, unplug request cb is called first. And when guest OS finished handling unplug, unplug cb will be called to do the real removal of device. This patch adds hotunplug cb to ich9, which memory and CPU hot unplug will use it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26acpi, ich9: Add hotunplug request cb for ich9.Tang Chen1-2/+3
Memory and CPU hot unplug are both asynchronous procedures. They both need unplug request cb when the unplug operation happens. This patch adds hotunplug request cb for ich9, and memory and CPU hot unplug will share it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster3-23/+12
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-13isa: remove isa_mem_base variableHervé Poussineau1-1/+0
Now that isa_mem_base variable is always 0, we can remove its usage. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13piix4: use PCI address space instead of system memoryHervé Poussineau1-1/+1
piix4 is only used on MIPS Malta board, which gives get_system_memory() to pci_register_bus(). Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13isa: add memory space parameter to isa_bus_newHervé Poussineau5-7/+15
Currently, keep current behaviour by always using get_system_memory(). Also use QOM casts when possible. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini1-1/+1
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-15vt82c686: avoid out-of-bounds readPaolo Bonzini1-1/+1
superio_ioport_readb can read the 256th element of the array. Coverity reports an out-of-bounds write in superio_ioport_writeb, but it does not show the corresponding out-of-bounds read because it cannot prove that it can happen. Fix the root cause of the problem (zhanghailang's patch instead fixes the logic in superio_ioport_writeb). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: qemu-stable@nongnu.org
2014-12-10vt82c686: fix coverity warning about out-of-bounds writezhanghailiang1-22/+19
Refactor superio_ioport_writeb to fix the out of bounds write warning. In addition, fix two typos: s/chage/change/ Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster1-2/+2
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()Markus Armbruster1-2/+5
The patch is big, but all it really does is replacing dinfo->bdrv by blk_bs(blk_by_legacy_dinfo(dinfo)) The replacement is repetitive, but the conversion of device models to BlockBackend is imminent, and will shorten it to just blk_legacy_dinfo(dinfo). Line wrapping muddies the waters a bit. I also omit tests whether dinfo->bdrv is null, because it never is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-15qdev: HotplugHandler: Rename unplug callback to unplug_requestIgor Mammedov1-3/+3
'HotplugHandler.unplug' callback is currently used as async call to issue unplug request for device that implements it. Renaming 'unplug' callback to 'unplug_request' should help to avoid confusion about what callback does and would allow to introduce 'unplug' callback that would perform actual device removal when guest is ready for it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-09-02Fix debug print warningGonglei1-2/+3
Steps: 1.enable qemu debug print, using simply scprit as below: grep "//#define DEBUG" * -rl | xargs sed -i "s/\/\/#define DEBUG/#define DEBUG/g" 2. make -j 3. get some warning: hw/i2c/pm_smbus.c: In function 'smb_ioport_writeb': hw/i2c/pm_smbus.c:142: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/i2c/pm_smbus.c:142: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i2c/pm_smbus.c: In function 'smb_ioport_readb': hw/i2c/pm_smbus.c:209: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/intc/i8259.c: In function 'pic_ioport_read': hw/intc/i8259.c:373: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/input/pckbd.c: In function 'kbd_write_command': hw/input/pckbd.c:232: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/input/pckbd.c: In function 'kbd_write_data': hw/input/pckbd.c:333: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_writeb': hw/isa/apm.c:44: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/isa/apm.c:44: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_readb': hw/isa/apm.c:67: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/timer/mc146818rtc.c: In function 'cmos_ioport_write': hw/timer/mc146818rtc.c:394: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i386/pc.c: In function 'port92_write': hw/i386/pc.c:479: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' Fix them. Cc: qemu-trivial@nongnu.org Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15isa-bus: don't use 'Yoda conditions'Gonglei1-1/+1
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15pci-host: update obsolete reference about piix_pci.cGonglei1-1/+1
piix_pci.c has been renamed into piix.c at commit c0907c9e6417cb959dfd9ef6873221536ec91351 update the obsolete reference. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-19acpi: implement ospm_status() method for PIIX4/ICH9_LPC devicesIgor Mammedov1-0/+3
... using TYPE_ACPI_DEVICE_IF interface. Which provides status reporting of ACPI declared memory devices Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: q35: acpi: report error to user on unsupported unplug requestIgor Mammedov1-0/+2
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:ich9: add memory hotplug handlingIgor Mammedov1-0/+20
Add memory hotplug initialization/handling to ICH9 LPC device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: ich9 lpc: make it work with global/compat propertiesIgor Mammedov1-5/+10
Propeties of object should be available after its instances_init() callback is finished and not added in PCIDeviceClass.init which is roughly corresponds to realize() method. Moving properties adding into instances_init will fix missing property error when global/compat property mechanism is used. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela4-8/+3
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-10hw/isa/pc87312: Remove unused function is_parallel_epp()Peter Maydell1-5/+0
The function is_parallel_epp() is unused; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-05PortioList: Store PortioList in device stateKirill Batuzov1-3/+8
PortioList is an abstraction used for construction of MemoryRegionPortioList from MemoryRegionPortio. It can be used later to unmap created memory regions. It also requires proper cleanup because some of the memory inside is allocated dynamically. By moving PortioList ot device state we make it possible to cleanup later and avoid leaking memory. This change spans several target platforms. The following testcases cover all changed lines: qemu-system-ppc -M prep qemu-system-i386 -vga qxl qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-20Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell2-3/+3
into staging QOM infrastructure fixes and device conversions * QTest cleanups and test cases for PCI NICs * NAND fix for "info qtree" * Cleanup and extension of QOM machine tests * IndustryPack test cases and conversion to QOM realize * I2C cleanups * Cleanups of legacy qdev properties # gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (49 commits) qtest: Include system headers before user headers qapi: Refine human printing of sizes qdev: Use QAPI type names for properties qdev: Add enum property types to QAPI schema block: Handle "rechs" and "large" translation options qdev: Remove hex8/32/64 property types qdev: Remove most legacy printers qdev: Use human mode in "info qtree" qapi: Add human mode to StringOutputVisitor qdev: Inline qdev_prop_parse() qdev: Legacy properties are just strings qdev: Legacy properties are now read-only qdev: Remove legacy parsers for hex8/32/64 qdev: Sizes are now parsed by StringInputVisitor qapi: Add size parser to StringInputVisitor qtest: Don't segfault with invalid -qtest option ipack: Move IndustryPack out of hw/char/ ipoctal232: QOM parent field cleanup ipack: QOM parent field cleanup for IPackDevice ipack: QOM parent field cleanup for IPackBus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini1-1/+1
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14i2c: Rename i2c_bus to I2CBusAndreas Färber1-2/+2
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov1-1/+1
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23vt82c686: Clean up use of cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+5
A VT82C686B southbridge has multiple functions. We model each function as a separate qdev. One of them need some special wiring set up in mips_fulong2e_init() to work: the ISA bridge at 05.0. The IDE controller at 05.1 (via-ide) has always had cannot_instantiate_with_device_add_yet set, but there is no obvious reason why device_add could not work for them. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+5
A PIIX3/PIIX4 southbridge has multiple functions. We model each function as a separate qdev. Two of them need some special wiring set up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0, and the SMBus controller at 01.3. The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has always had cannot_instantiate_with_device_add_yet set, but there is no obvious reason why device_add could not work for them. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23ich9: Document why cannot_instantiate_with_device_add_yetMarkus Armbruster1-2/+5
An ICH9 southbridge contains several PCI devices, some of them with multiple functions. We model each function as a separate qdev. Two of them need some special wiring set up in pc_q35_init() to work: the LPC controller at 00:1f.0, and the SMBus controller at 00:1f.3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23sysbus: Set cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+0
device_add plugs devices into suitable bus. For "real" buses, that actually connects the device. For sysbus, the connections need to be made separately, and device_add can't do that. The device would be left unconnected, and could not possibly work. Quite a few, but not all sysbus devices already set cannot_instantiate_with_device_add_yet in their class init function. Set it in their abstract base's class init function sysbus_device_class_init(), and remove the now redundant assignments from device class init functions. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 14:19:51 +0000