summaryrefslogtreecommitdiff
path: root/hw/ide/atapi.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-22block: Don't call bdrv_eject() if the tray state didn't changeLuiz Capitulino1-2/+5
It's not needed. Besides we can then assume that bdrv_eject() is only called when there's a tray state change, which is useful to the DEVICE_TRAY_MOVED event (going to be added in a future commit). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15block: bdrv_aio_* do not return NULLPaolo Bonzini1-7/+1
Initially done with the following semantic patch: @ rule1 @ expression E; statement S; @@ E = ( bdrv_aio_readv | bdrv_aio_writev | bdrv_aio_flush | bdrv_aio_discard | bdrv_aio_ioctl ) (...); ( - if (E == NULL) { ... } | - if (E) { <... S ...> } ) which however missed the occurrence in block/blkverify.c (as it should have done), and left behind some unused variables. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-18atapi: kill MODE SENSE(6), fix MODE SENSE(10)Paolo Bonzini1-12/+8
Mode page 2A of emulated ATAPI DVD-ROM should have page length 0x14 like SCSI CD-ROM, rather than 0x12. Mode page length is off by 8, as it should contain the length of the payload after the first two bytes. MODE SENSE(6) should be thrown out of ATAPI DVD-ROM emulation. It is not specified in the ATAPI list of MMC-2, and MMC-5 prescribes to use MODE SENSE(10). Anyway, its implementation is wrong. Reported-by: Thomas Schmitt <scdbackup@gmx.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-11atapi: implement eject requestsPaolo Bonzini1-3/+8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi/scsi-disk: make mode page values coherent between the twoPaolo Bonzini1-7/+7
This patch adds to scsi-disk the missing mode page 0x01 for both disk and CD-ROM drives, and mode page 0x0e for CD drives only. A few offsets were wrong in atapi.c. Also change the 2Ah mode page to expose DVD media read capabilities in the IDE cdrom. This lets you run dvd+rw-mediainfo on the virtual DVD drives. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi: cleanup/fix mode sense resultsPaolo Bonzini1-4/+6
The first two bytes (after the 8-byte ATAPI header) are the mode page number and the number of bytes after the length field itself. Make this clear in the code. The AUDIO_CTL page was filled with wrong values. It is not anymore in MMC, but at least keep the values sane. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi: move GESN definitions to scsi-defs.hPaolo Bonzini1-37/+6
As a complement to the previous patch, move definitions for GET EVENT STATUS NOTIFICATION from the two functions to scsi-defs.h. The NCR_* constants are just bit values corresponding to the ENC_* values, with no offsets even, so keep just one copy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi/scsi: unify definitions for MMCPaolo Bonzini1-26/+26
The definitions in ide/internal.h are duplicates, since ATAPI commands actually come from SCSI. Use the ones in scsi-defs.h and move the missing ones there. Two exceptions: - MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry" page in scsi-disk.c. It is unused, so pick the latter. - GPCMD_* is left in ide/internal.h, at least for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Don't fail eject when tray is already openMarkus Armbruster1-1/+1
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive already has the requested state. cmd_start_stop_unit() fails when asked to eject while the tray is open and locked. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster1-1/+1
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Leave enforcing tray lock to device modelsMarkus Armbruster1-20/+9
The device model knows best when to accept the guest's eject command. No need to detour through the block layer. bdrv_eject() can't fail anymore. Make it void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray locked stateMarkus Armbruster1-1/+3
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Revert entanglement of bdrv_is_inserted() with tray statusMarkus Armbruster1-7/+8
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is open. Unfortunately, there are two different kinds of users, with conflicting needs. 1. Device models using bdrv_eject(), currently ide-cd and scsi-cd. They expect bdrv_is_inserted() to reflect the tray status. Commit 4be9762a makes them happy. 2. Code that wants to know whether a BlockDriverState has media, such as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them unhappy. In particular, it breaks flush on VM stop for media ejected by the guest. Revert the change to bdrv_is_inserted(). Check the tray status in the device models instead. Note on IDE: Since only ATAPI devices have a tray, and they don't accept ATA commands since the recent commit "ide: Reject ATA commands specific to drive kinds", checking in atapi.c suffices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray open/close stateMarkus Armbruster1-1/+5
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Clean up misleading name in cmd_start_stop_unit()Markus Armbruster1-4/+4
"eject" is misleading; it means "eject" when start is clear, but "load" when start is set. Rename to loej, because that's how MMC-5 calls it, in section 6.40. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil1-2/+2
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-25block: explicit I/O accountingChristoph Hellwig1-9/+20
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and make the hardware models call directly into the accounting helpers. This means: - we do not count internal requests from image formats in addition to guest originating I/O - we do not double count I/O ops if the device model handles it chunk wise - we only account I/O once it actuall is done - can extent I/O accounting to synchronous or coroutine I/O easily - implement I/O latency tracking easily (see the next patch) I've conveted the existing device model callers to the new model, device models that are using synchronous I/O and weren't accounted before haven't been updated yet. Also scsi hasn't been converted to the end-to-end accounting as I want to defer that after the pending scsi layer overhaul. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03ide/atapi: fix set but unusedAlon Levy1-3/+1
Signed-off-by: Alon Levy <alevy@redhat.com> Acked-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03atapi: Explain why we need a 'media not present' stateAmit Shah1-1/+7
After the re-org of the atapi code, it might not be intuitive for a reader of the code to understand why we're inserting a 'media not present' state between cd changes. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-03atapi: Move comment to proper placeAmit Shah1-1/+1
Move misplaced comment for media_is_dvd() Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide/atapi: Introduce CHECK_READY flag for commandsKevin Wolf1-25/+23
Some commands are supposed to report a Not Ready Condition (i.e. they require a medium to be present in order to execute successfully). Instead of duplicating the check in each command implementation, let's add a flag and check it before calling the command. This patch only converts existing checks, it does not introduce new checks for any of the other commands that can/should report a Not Ready Condition. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide/atapi: Replace bdrv_get_geometry calls by s->nb_sectorsKevin Wolf1-15/+6
The disk size can only change when the medium is changed, and the change callback takes care of updating s->nb_sectors in this case. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide/atapi: Use table instead of switch for commandsKevin Wolf1-67/+48
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide/atapi: Factor commands outKevin Wolf1-378/+459
In preparation for a table of function pointers, factor each command out from ide_atapi_cmd() into its own function. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide: Split atapi.c outKevin Wolf1-0/+1083
Besides moving code, this patch only fixes some whitespace issues in the moved code and makes all functions in atapi.c static which can be static. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 09:22:17 +0000