summaryrefslogtreecommitdiff
path: root/hw/i386/kvm
AgeCommit message (Collapse)AuthorFilesLines
2016-11-28pci-assign: sync MSI/MSI-X cap and table with PCIDevicePeter Xu1-0/+4
Since commit e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn"), kvm_irqchip_add_msi_route() starts to use pci_get_msi_message() to fetch MSI info. This requires that we setup MSI related fields in PCIDevice. For most devices, that won't be a problem, as long as we are using general interfaces like msi_init()/msix_init(). However, for pci-assign devices, MSI/MSI-X is treated differently - PCI assign devices are maintaining its own MSI table and cap information in AssignedDevice struct. however that's not synced up with PCIDevice's fields. That will leads to pci_get_msi_message() failed to find correct MSI capability, even with an NULL msix_table. A quick fix is to sync up the two places: both the capability bits and table address for MSI/MSI-X. Reported-by: Changlimin <changlimin@h3c.com> Tested-by: Changlimin <changlimin@h3c.com> Cc: qemu-stable@nongnu.org Fixes: e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1480042522-16551-1-git-send-email-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-31*_run_on_cpu: introduce run_on_cpu_data typePaolo Bonzini1-7/+7
This changes the *_run_on_cpu APIs (and helpers) to pass data in a run_on_cpu_data type instead of a plain void *. This is because we sometimes want to pass a target address (target_ulong) and this fails on 32 bit hosts emulating 64 bit guests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC modeIgor Mammedov1-2/+10
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-17apic: add send_msi() to APICCommonClassRadim Krčmář1-6/+13
The MMIO based interface to APIC doesn't work well with MSIs that have upper address bits set (remapped x2APIC MSIs). A specialized interface is a quick and dirty way to avoid the shortcoming. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-09-27cpus: pass CPUState to run_on_cpu helpersAlex Bennée1-3/+2
CPUState is a fairly common pointer to pass to these helpers. This means if you need other arguments for the async_run_on_cpu case you end up having to do a g_malloc to stuff additional data into the routine. For the current users this isn't a massive deal but for MTTCG this gets cumbersome when the only other parameter is often an address. This adds the typedef run_on_cpu_func for helper functions which has an explicit CPUState * passed as the first parameter. All the users of run_on_cpu and async_run_on_cpu have had their helpers updated to use CPUState where available. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [Sergey Fedorov: - eliminate more CPUState in user data; - remove unnecessary user data passing; - fix target-s390x/kvm.c and target-s390x/misc_helper.c] Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-22kvm: apic: set APIC base as part of kvm_apic_putDr. David Alan Gilbert1-0/+2
The parsing of KVM_SET_LAPIC's input depends on the current value of the APIC base MSR---which indeed is stored in APICCommonState---but for historical reasons APIC base is set through KVM_SET_SREGS together with cr8 (which is really just the APIC TPR) and the actual "special CPU registers". APIC base must now be set before the actual LAPIC registers, so do that in kvm_apic_put. It will be set again to the same value with KVM_SET_SREGS, but that's not a big issue. This only happens since Linux 4.8, which checks for x2apic mode in KVM_SET_LAPIC. However it's really a QEMU bug; until the recent commit 78d6a05 ("x86/lapic: Load LAPIC state at post_load", 2016-09-13) QEMU was indeed setting APIC base (via KVM_SET_SREGS) before the other LAPIC registers. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-19kvm/apic: drop debuggingMichael S. Tsirkin1-1/+0
commit 78d6a05d2f69cbfa6e95f0a4a24a2c934969913b ("x86/lapic: Load LAPIC state at post_load") has some debugging leftovers. Drop them. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-09-15Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-2/+25
* minor patches here and there * MTTCG: lock-free TB lookup * SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi * buffer_is_zero rewrite (except for one patch) * chardev: qemu_chr_fe_write checks * checkpatch improvement for markdown preformatted text * default-configs cleanups * atomics cleanups # gpg: Signature made Tue 13 Sep 2016 18:14:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) cutils: Add generic prefetch cutils: Add SSE4 version cutils: Add test for buffer_is_zero cutils: Remove ppc buffer zero checking cutils: Remove aarch64 buffer zero checking cutils: Rearrange buffer_is_zero acceleration cutils: Export only buffer_is_zero cutils: Remove SPLAT macro cutils: Move buffer_is_zero and subroutines to a new file ppc: do not redefine CPUPPCState x86/lapic: Load LAPIC state at post_load optionrom: do not rely on compiler's bswap optimization checkpatch: Fix whitespace checks for documentation code blocks atomics: Use __atomic_*_n() variant primitives atomics: Remove redundant barrier()'s kvm-all: drop kvm_setup_guest_memory i8257: Make device "i8257" unavailable with -device Revert "megasas: remove useless check for cmd->frame" char: convert qemu_chr_fe_write to qemu_chr_fe_write_all hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: cpus.c tests/Makefile.include
2016-09-13x86/lapic: Load LAPIC state at post_loadDr. David Alan Gilbert1-2/+25
Load the LAPIC state during post_load (rather than when the CPU starts). This allows an interrupt to be delivered from the ioapic to the lapic prior to cpu loading, in particular the RTC that starts ticking as soon as we load it's state. Fixes a case where Windows hangs after migration due to RTC interrupts disappearing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13pic: fix typo in error message: KVM_GET_IRQCHIP -> KVM_SET_IRQCHIPBruce Rogers1-1/+1
Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-07-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-6/+4
pc, pci, virtio: new features, cleanups, fixes - interrupt remapping for intel iommus - a bunch of virtio cleanups - fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 21 Jul 2016 18:49:30 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (57 commits) intel_iommu: avoid unnamed fields virtio: Update migration docs virtio-gpu: Wrap in vmstate virtio-gpu: Use migrate_add_blocker for virgl migration blocking virtio-input: Wrap in vmstate 9pfs: Wrap in vmstate virtio-serial: Wrap in vmstate virtio-net: Wrap in vmstate virtio-balloon: Wrap in vmstate virtio-rng: Wrap in vmstate virtio-blk: Wrap in vmstate virtio-scsi: Wrap in vmstate virtio: Migration helper function and macro virtio-serial: Remove old migration version support virtio-net: Remove old migration version support virtio-scsi: Replace HandleOutput typedef Revert "mirror: Workaround for unexpected iohandler events during completion" virtio-scsi: Call virtio_add_queue_aio virtio-blk: Call virtio_add_queue_aio virtio: Introduce virtio_add_queue_aio ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-21kvm-irqchip: do explicit commit when update irqPeter Xu1-0/+2
In the past, we are doing gsi route commit for each irqchip route update. This is not efficient if we are updating lots of routes in the same time. This patch removes the committing phase in kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all routes updated. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: simplify kvm_irqchip_add_msi_routePeter Xu1-6/+2
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route into the vector number. Vector index provides more information than the MSIMessage, we can retrieve the MSIMessage using the vector easily. This will avoid fetching MSIMessage every time before adding MSI routes. Meanwhile, the vector info will be used in the coming patches to further enable gsi route update notifications. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20(kvm)apic: Add unrealize callbacksIgor Mammedov1-0/+5
Callbacks will do necessary cleanups before APIC device is deleted Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-20apic: kvm-apic: Fix crash due to access to freed memory regionIgor Mammedov1-2/+2
kvm-apic.io_memory memory region had its parent set to NULL at memory_region_init_io() time, so it ended up as a child in /unattached contaner. As result when kvm-apic instance was deleted, the child property /unattached/kvm-apic-msi[XXX] contained a reference to kvm-apic.io_memory address which was freed as part of kvm-apic. Do the same as 'apic' and make kvm-apic instance the owner of the memory region so that it won't end up in /unattached and gets cleanly released along with related kvm-apic instance. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster2-2/+4
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-06-29pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.cLin Ma1-4/+0
In function pci_assign_dev_load_option_rom, For those pci devices don't have 'rom' file under sysfs or if loading ROM from external file, The function returns NULL, and won't set the passed 'size' variable. In these 2 cases, qemu still reports "Invalid ROM" error message, Users may be confused by it. Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <1466010327-22368-1-git-send-email-lma@suse.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-24i386: pci-assign: Fix MSI-X table sizeIdo Yariv1-7/+7
The current code creates a whole page mmio region for the MSI-X table size. However, the page containing the MSI-X table may contain other registers not related to MSI-X. Creating an mmio region for the whole page masks such registers and may break drivers in the guest OS. Since maximal number of entries is known, use that instead to deduce the table size when setting up the mmio region. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+1
pc, pci, virtio: new features, cleanups, fixes Beginning of reconnect support for vhost-user. Misc cleanups and fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 17 Jun 2016 01:28:39 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: MAINTAINERS: add Marcel to PCI msi_init: change return value to 0 on success fix some coding style problems pci core: assert ENOSPC when add capability test: start vhost-user reconnect test tests: append i386 tests vhost-net: save & restore vring enable state vhost-net: save & restore vhost-user acked features vhost-net: do not crash if backend is not present vhost-user: disconnect on start failure qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd tests/vhost-user-bridge: workaround stale vring base tests/vhost-user-bridge: add client mode vhost-user: add ability to know vhost-user backend disconnection pci: fix pci_requester_id() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: tests/Makefile.include
2016-06-17pci: fix pci_requester_id()Peter Xu1-1/+1
This fix SID verification failure when IOMMU IR is enabled with PCI bridges. Existing pci_requester_id() is more like getting BDF info only. Renaming it to pci_get_bdf(). Meanwhile, we provide the correct implementation to get requester ID. VT-d spec 5.1.1 is a good reference to go, though it talks only about interrupt delivery, the rule works exactly the same for non-interrupt cases. Currently, there are three use cases for pci_requester_id(): - PCIX status bits: here we need BDF only, not requester ID. Replacing with pci_get_bdf(). - PCIe Error injection and MSI delivery: for both these cases, we are looking for requester IDs. Here we should use the new impl. To avoid a PCI walk every time we send MSI message, one requester_id cache field is added to PCIDevice to cache the result when initialize PCI device. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini1-1/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini2-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19explicitly include linux/kvm.hPaolo Bonzini2-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster2-0/+2
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-11msi_supported -> msi_nonbrokenMichael S. Tsirkin1-1/+1
Rename controller flag to make it clearer what it means. Add some documentation as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell6-4/+6
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-13pci-assign: Clean up "Failed to assign" error messagesMarkus Armbruster1-8/+8
The arguments of error_setg() & friends should yield a short error string without newlines. Two places try to append additional help to the error message by embedding newlines in the error string. That's nice, but let's do it the right way, with error_append_hint(). Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-20-git-send-email-armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2015-11-05kvmclock: add a new function to update env->tsc.Liang Li1-16/+2
The commit 317b0a6d8 fixed an issue which caused by the outdated env->tsc value, but the fix lead to 'cpu_synchronize_all_states()' called twice during live migration. The 'cpu_synchronize_all_states()' takes about 130us for a VM which has 4 vcpus, it's a bit expensive. Synchronize the whole CPU context just for updating env->tsc is too wasting, this patch use a new function to update the env->tsc. Comparing to 'cpu_synchronize_all_states()', it only takes about 20us. Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1446695464-27116-2-git-send-email-liang.z.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Pass PCI device pointer to MSI routing functionsPavel Fedin1-4/+5
In-kernel ITS emulation on ARM64 will require to supply requester IDs. These IDs can now be retrieved from the device pointer using new pci_requester_id() function. This patch adds pci_dev pointer to KVM GSI routing functions and makes callers passing it. x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c also made passing PCI device pointer instead of NULL for consistency with the rest of the code. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19hw/pci: Introduce pci_requester_id()Pavel Fedin1-1/+1
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ routing code. This patch introduces reusable convenient way to obtain this ID from the device pointer. The new function is now used in some places, where the same calculation was used. MemTxAttrs.stream_id also renamed to requester_id in order to better reflect semantics of the field. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-08pci-assign: do not include sys/io.hPaolo Bonzini1-1/+0
This file does not exist on bionic libc and the functions it defines are in fact not used by pci-assign.c. Remove it. Reported-by: Houcheng Lin <houcheng@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-25hmp: added io apic dump statePavel Butsykin1-0/+10
Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-10hw/pci-assign: split pci-assign.cTiejun Chen1-75/+7
We will try to reuse assign_dev_load_option_rom in xen side, and especially its a good beginning to unify pci assign codes both on kvm and xen in the future. [Fix build for Windows] Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-23pci-assign: QOMifyGonglei1-18/+21
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-26pci-assign: Convert to realizeMarkus Armbruster1-6/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-18monitor: Clean up around monitor_handle_fd_param()Markus Armbruster1-3/+2
monitor_handle_fd_param() is a wrapper around monitor_handle_fd_param2() that feeds errors to qerror_report_err() instead of returning them. qerror_report_err() is inappropriate in many contexts. monitor_handle_fd_param() looks simpler than monitor_handle_fd_param2(), which tempts use. Remove the temptation: drop the wrapper and open-code the (trivial) error handling instead. Replace the open-coded qerror_report_err() by error_report_err() in places that already use error_report(). Turns out that's everywhere. While there, rename monitor_handle_fd_param2() to monitor_fd_param(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18error: Use error_report_err() where appropriateMarkus Armbruster1-6/+3
Coccinelle semantic patch: @@ expression E; @@ - error_report("%s", error_get_pretty(E)); - error_free(E); + error_report_err(E); @@ expression E, S; @@ - error_report("%s", error_get_pretty(E)); + error_report_err(E); ( exit(S); | abort(); ) Trivial manual touch-ups in block/sheepdog.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-15kvm/apic: fix 2.2->2.1 migrationPaolo Bonzini1-3/+7
The wait_for_sipi field is set back to 1 after an INIT, so it was not effective to reset it in kvm_apic_realize. Introduce a reset callback and reset wait_for_sipi there. Reported-by: Igor Mammedov <imammedo@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15valgrind/i386: avoid false positives on KVM_SET_PIT ioctlChristian Borntraeger1-1/+1
struct kvm_pit_state2 contains pad fields. Let's use a designated initializer to avoid false positives from valgrind/memcheck. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15valgrind/i386: avoid false positives on KVM_SET_CLOCK ioctlChristian Borntraeger1-2/+1
kvm_clock_data contains pad fields. Let's use a designated initializer to avoid false positives from valgrind/memcheck. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-13kvmclock: Add comment explaining why we need cpu_clean_all_dirty()Eduardo Habkost1-0/+14
Try to explain why commit 317b0a6d8ba44e9bf8f9c3dbd776c4536843d82c needed a cpu_clean_all_dirty() call just after calling cpu_synchronize_all_states(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Andrey Korolyov <andrey@xdel.ru> Cc: Marcin Gibuła <m.gibula@beyond.pl> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-13apic_common: migrate missing fieldsPavel Dovgalyuk1-0/+3
This patch adds missed sipi_vector and wait_for_sipi fields to a new subsection of the vmstate of the apic_common module. Saving and loading of these fields makes migration of the apic state deterministic. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> [Initialize the field in pre_load and kvm_apic_realize. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-15bootindex: move calling add_boot_device_patch to bootindex setter functionGonglei1-2/+0
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15pci-assign: remove bootindex property from qdev to qomGonglei1-1/+11
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-16kvmclock: Ensure time in migration never goes backwardAlexander Graf1-0/+49
When we migrate we ask the kernel about its current belief on what the guest time would be. However, I've seen cases where the kvmclock guest structure indicates a time more recent than the kvm returned time. To make sure we never go backwards, calculate what the guest would have seen as time at the point of migration and use that value instead of the kernel returned one when it's more recent. This bases the view of the kvmclock after migration on the same foundation in host as well as guest. Signed-off-by: Alexander Graf <agraf@suse.de> Cc: qemu-stable@nongnu.org Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculationMarcelo Tosatti1-0/+4
Ensure proper env->tsc value for kvmclock_current_nsec calculation. Reported-by: Marcin Gibuła <m.gibula@beyond.pl> Analyzed-by: Marcin Gibuła <m.gibula@beyond.pl> Cc: qemu-stable@nongnu.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16pit: fix pit interrupt can't inject into vm after migrationChenLiang1-2/+1
kvm_pit is running in kmod. kvm_pit is going to inject interrupt to vm before cpu_synchronize_all_post_init at dest side. vcpu will lose the pit interrupt, but ack_irq(in kmod) has been 0. ack_irq become 1 after vcpu responds pit interrupt. pit interruptcan inject to vm when ack_irq is 1. By the way, kvm_pit_vm_state_change has save and load state of pit, so pre_save and post_load is unnecessary. Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao1-1/+2
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-8/+0
SCSI changes that enable sending vendor-specific commands via virtio-scsi. Memory changes for QOMification and automatic tracking of MR lifetime. # gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: mtree: remove write-only field memory: Use canonical path component as the name memory: Use memory_region_name for name access memory: constify memory_region_name exec: Abstract away ref to memory region names loader: Abstract away ref to memory region names tpm_tis: remove instance_finalize callback memory: remove memory_region_destroy memory: convert memory_region_destroy to object_unparent ioport: split deletion and destruction nic: do not destroy memory regions in cleanup functions vga: do not dynamically allocate chain4_alias sysbus: remove unused function sysbus_del_io qom: object: move unparenting to the child property's release callback qom: object: delete properties before calling instance_finalize virtio-scsi: implement parse_cdb scsi-block, scsi-generic: implement parse_cdb scsi-block: extract scsi_block_is_passthrough scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo scsi-bus: prepare scsi_req_new for introduction of parse_cdb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini1-8/+0
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 03:17:41 +0000