summaryrefslogtreecommitdiff
path: root/hmp-commands.hx
AgeCommit message (Collapse)AuthorFilesLines
2012-09-05qapi: convert screendumpLuiz Capitulino1-2/+1
Next commits will update devices to propagate errors. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05qapi: convert sendkeyAmos Kong1-1/+1
Convert 'sendkey' to use QAPI. QAPI passes key's index of mapping table to qmp_send_key(), not keycode. So we use help functions to convert key/code to index of key_defs, and 'index' will be converted to 'keycode' inside qmp_send_key(). For qmp, QAPI would check invalid key and raise error. For hmp, invalid key is checked in hmp_send_key(). 'send-key' of QMP doesn't support key in hexadecimal format. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05hmp: rename argumentsAmos Kong1-1/+1
Rename 'string' to 'keys', rename 'hold_time' to 'hold-time'. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05fix doc of using raw values with sendkeyAmos Kong1-3/+3
(qemu) sendkey a (qemu) sendkey 0x1e (qemu) sendkey #0x1e unknown key: '#0x1e' The last command doesn't work, '#' is not requested before raw values, and the raw value in decimal format is not supported. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-08Add migrate_set_cache_size commandOrit Wasserman1-0/+22
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be rounded down to the nearest power of 2). If XBZRLE cache size is too small there will be many cache miss. New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP command to query cache value. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migrate-set-capabilitiesOrit Wasserman1-0/+14
The management can enable/disable a capability for the next migration by using migrate-set-capabilities QMP command. The user can use migrate_set_capability HMP command. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migration capabilitiesOrit Wasserman1-0/+2
The management can query the current migration capabilities using query-migrate-capabilities QMP command. The user can use 'info migrate_capabilities' HMP command. Currently only XBZRLE capability is available. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-06qapi: generalize documentation of streaming commandsPaolo Bonzini1-1/+1
Talk about background operations in general, rather than specifically about streaming. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-13qapi: Convert getfd and closefdCorey Bryant1-4/+2
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04qapi: convert netdev_delLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qapi: convert netdev_addLuiz Capitulino1-2/+1
This is not a full QAPI conversion, but an intermediate step. In essence, do_netdev_add() is split into three functions: 1. netdev_add(): performs the actual work. This function is fully converted to Error (thus, it's "qapi-friendly") 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is coded by hand and not auto-generated (gen=no in the schema). The reason for this it's a lot easier and simpler to with QemuOpts this way 3. hmp_netdev_add(): HMP front-end. This design was suggested by Paolo Bonzini. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04introduce a new monitor command 'dump-guest-memory' to dump guest's memoryWen Congyang1-0/+28
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27block: add 'speed' optional parameter to block-streamStefan Hajnoczi1-2/+2
Allow streaming operations to be started with an initial speed limit. This eliminates the window of time between starting streaming and issuing block-job-set-speed. Users should use the new optional 'speed' parameter instead so that speed limits are in effect immediately when the job starts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27block: change block-job-set-speed argument from 'value' to 'speed'Stefan Hajnoczi1-2/+2
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-20fix block_job_set_speed name in documentationPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-09qapi: convert device_delLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-15qapi: Convert migrateLuiz Capitulino1-2/+1
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-12qmp: convert blockdev-snapshot-sync to a wrapper around transactionsPaolo Bonzini1-3/+6
Simplify the blockdev-snapshot-sync code and gain failsafe operation by turning it into a wrapper around the new transaction command. A new option is also added matching "mode". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-03Merge branch 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensaBlue Swirl1-1/+1
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa: target-xtensa: add breakpoint tests target-xtensa: add DEBUG_SECTION to overlay tool target-xtensa: add DBREAK data breakpoints exec: let cpu_watchpoint_insert accept larger watchpoints exec: fix check_watchpoint exiting cpu_loop exec: add missing breaks to the watch_mem_write target-xtensa: add ICOUNT SR and debug exception target-xtensa: implement instruction breakpoints target-xtensa: add DEBUGCAUSE SR and configuration target-xtensa: fetch 3rd opcode byte only when needed target-xtensa: implement info tlb monitor command target-xtensa: define TLB_TEMPLATE for MMU-less cores
2012-02-24suspend: add system_wakeup monitor commandGerd Hoffmann1-0/+14
This patch adds the system_wakeup monitor command which will simply wake up suspended guests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-18target-xtensa: implement info tlb monitor commandMax Filippov1-1/+1
Command dumps valid ITLB and DTLB entries. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi1-0/+14
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_set_speed commandStefan Hajnoczi1-0/+14
Add block_job_set_speed, which sets the maximum speed for a background block operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi1-0/+13
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-18qapi: Convert block_set_io_throttleLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert changeLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert ejectLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert expire_passwordLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert set_passwordLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-04Expose drive_add on all architecturesAlexander Graf1-2/+0
All architectures can now use drive_add on the monitor. This of course does not mean that there is hotplug support for the specific platform, so in order to actually make use of the new drives you still need to have a hotplug capable device. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori1-1/+1
2011-12-06qapi: Convert migrate_set_speedLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_set_downtimeLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_cancelLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert blockdev_snapshot_syncLuiz Capitulino1-1/+1
Unfortunately, this conversion required an additional change. In the old QMP command, the 'snapshot-file' argument is specified as optional. The idea is to take the snapshot internally if 'snapshot-file' is not passed. However, internal snapshots are not supported yet so the command returns a MissingParamater error if 'snapshot-file' is not passed. Which makes the argument actually required and will cause compatibility breakage if we change that in the future. To fix this the QAPI converted blockdev_snapshot_sync command makes the 'snapshot-file' argument required. Again, in practice it's actually required, so this is not incompatible. If we do implement internal snapshots someday, we'll need a new argument for it. Note that this discussion doesn't affect HMP. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_resizeLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert balloonLuiz Capitulino1-3/+1
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC API, but the new command is a regular synchronous command. There shouldn't be visible differences though, as MONITOR_CMD_ASYNC is internal only. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_passwdLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert set_linkLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert inject-nmiLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert contLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert pmemsaveLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert memsaveLuiz Capitulino1-2/+1
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06pcie_aer: adjust do_pcie_aer_inejct_error -> do_pcie_aer_inject_errorZhi Yong Wu1-1/+1
This function name is a bit wrong. Although it doesn't impact function, it is a bit necessary that we should fixup it. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05block: add -drive copy-on-read=on|offStefan Hajnoczi1-2/+3
This patch adds the -drive copy-on-read=on|off command-line option: copy-on-read=on|off copy-on-read is "on" or "off" and enables whether to copy read backing file sectors into the image file. Copy-on-read avoids accessing the same backing file sectors repeatedly and is useful when the backing file is over a slow network. By default copy-on-read is off. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05hmp/qmp: add block_set_io_throttleZhi Yong Wu1-0/+15
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-31Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-2/+1
Conflicts: ui/spice-core.c
2011-10-27qapi: Convert the cpu commandLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-25spice: turn client_migrate_info to asyncYonit Halperin1-1/+2
RHBZ 737921 Spice client is required to connect to the migration target before/as migration starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client we trigger the connection to the target upon client_migrate_info command. client_migrate_info completion cb will be called after spice client has been connected to the target (or a timeout). See following patches and spice patches. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-10Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-7/+4
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 19:40:23 +0000