summaryrefslogtreecommitdiff
path: root/default-configs/pci.mak
AgeCommit message (Collapse)AuthorFilesLines
2015-10-24config: enable ivshmem on POSIXMarc-André Lureau1-1/+1
ivshmem doesn't actually require kvm, so enable it when POSIX is enabled. (it is required however when ioeventfd is enabled) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-05-11rocker: add new rocker switch deviceScott Feldman1-0/+1
Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-27Give ivshmem its own config optionDavid Gibson1-0/+1
Currently the ivshmem device is built whenever both PCI and KVM support are included. This patch gives it its own config option to allow easier customization of whether to include it. It's enabled by default in the same circumstances as now - when both PCI and KVM are available. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-13pci: Move PCI VGA to pci.makAlexander Graf1-0/+2
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-26hw: misc, add educational driverJiri Slaby1-0/+1
I am using qemu for teaching the Linux kernel at our university. I wrote a simple PCI device that can answer to writes/reads, generate interrupts and perform DMA. As I am dragging it locally over 2 years, I am sending it to you now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [Fix 32-bit compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Support SDHCI devices on PCIKevin O'Connor1-0/+2
Support for PCI devices following the "SD Host Controller Simplified Specification Version 2.00" spec. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-17NVMe: Initial commit for new storage interfaceKeith Busch1-0/+1
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci storage device. NVMe is an open, industry driven storage specification defining an optimized register and command set designed to deliver the full capabilities of non-volatile memory on PCIe SSDs. Further information may be found on the organizations website at: http://www.nvmexpress.org/ This commit implements the minimum from the specification to work with existing drivers. Cc: Keith Busch <keith.busch@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-29audio: enable PCI audio cards for all PCI-enabled targetsPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-0/+1
# By Paolo Bonzini (5) and others # Via Paolo Bonzini * bonzini/scsi-next: vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module vhost-scsi: new device supporting the tcm_vhost Linux kernel module virtio: simplify Makefile conditionals virtio-scsi: create VirtIOSCSICommon vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping scsi: VMWare PVSCSI paravirtual device implementation scsi: avoid assertion failure on VERIFY command Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19scsi: VMWare PVSCSI paravirtual device implementationDmitry Fleytman1-0/+1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> [ Rename files to vmw_pvscsi, fix setting of hostStatus in pvscsi_request_cancelled - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-16pci: add pci test deviceMichael S. Tsirkin1-0/+1
This device is used for kvm unit tests, currently it supports testing performance of ioeventfd. Using updated kvm unittest, here's an example output: mmio-no-eventfd:pci-mem 8796 mmio-wildcard-eventfd:pci-mem 3609 mmio-datamatch-eventfd:pci-mem 3685 portio-no-eventfd:pci-io 5287 portio-wildcard-eventfd:pci-io 1762 portio-datamatch-eventfd:pci-io 1777 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-08hw: move watchdogs to hw/watchdog, configure via default-configs/Paolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25VMXNET3 device implementationDmitry Fleytman1-0/+1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-14Add TEWS TPCI200 IndustryPack emulationAlberto Garcia1-0/+1
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22serial: add pci variantGerd Hoffmann1-0/+2
So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-09esp: move PCI emulation to a new file esp-pci.cHervé Poussineau1-0/+1
sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-03esp: enable for all PCI machinesPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03Revert "megasas: disable due to build breakage"Paolo Bonzini1-0/+1
This reverts commit 92336855975805d88c7979f53bc05c2d47abab04. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-09megasas: disable due to build breakageAnthony Liguori1-1/+0
The Buildbot has detected a new failure on builder default_i386_rhel61 while building qemu. Full details are available at: http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304 The proper fix is non-trivial so let's disable the build by default until it's fixed properly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-02megasas: LSI Megaraid SAS HBA emulationHannes Reinecke1-0/+1
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA. I've tested it to work with Linux, Windows Vista, and Windows7. Signed-off-by: Hannes Reinecke <hare@suse.de> [ Squashed trivial changes from Andreas Faerber, rebased over IOMMU and QBus changes - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-03-19get rid of CONFIG_VIRTIO_SCSIPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi1-0/+1
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-01-17xhci: Initial xHCI implementationHector Martin1-0/+1
Based on the implementation from Hector Martin <hector@marcansoft.com> Hectors's implementation completely sidestepped the qemu usb system and used libusb directly for usb device pass through. So I've ripped out the libusb bits (or left them in disabled, as reference for further coding) and hooked up the qemu subsystem instead. That work is not complete yet though, partly due to limitations of the qemu usb subsystem. Nevertheless I think it is better to continue development in-tree, especially as the qemu usb bits need a bunch of improvements too for decent usb 3.0 support. Current state: - usb-storage emulation should work ok. - Devices which need constant polling (HID emulation like usb-tablet) are known to not work. - ISO xfers are not implemented yet. - superspeed ports are not implemented yet. - usb pass-through is completely untested so far. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26usb: add ehci adapterGerd Hoffmann1-0/+1
This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-17config: add ahci for pci capable machinesAlexander Graf1-0/+1
This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf1-0/+3
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27Split out common pcnet codePaul Brook1-0/+1
The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Fix previous commitPaul Brook1-0/+11
Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 18:25:24 +0000