summaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2010-06-11tcg-s390: Adjust compilation flags.Richard Henderson1-1/+6
Force -m31/-m64 based on s390/s390x target. Force -march=z990. The TCG backend will always require the long-displacement facility, so the compiler may as well make use of that as well. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-11s390x: Don't use a linker script for user-only.Richard Henderson1-0/+3
The default placement of the application at 0x80000000 is fine, and will avoid the default placement for most other guests. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10tcg-i386: Merge 64-bit generation.Richard Henderson1-0/+2
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: display sysconfdir in summaryAurelien Jarno1-0/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10move computation of tools and roms outside of config-host.mak generationPaolo Bonzini1-19/+21
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: move directory defaults earlierPaolo Bonzini1-33/+14
Unify with existing special-purpose configure code for win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: ignore unknown --xyzdir optionsPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce more --xyzdir optionsPaolo Bonzini1-5/+21
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: expand ${prefix} in create_configPaolo Bonzini1-2/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: move all directory entries in config-host.mak closePaolo Bonzini1-7/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: unify handling of xyzdir variablesPaolo Bonzini1-8/+12
Making an xyzdir variable for each directory prepares for the next patches introducing config-host.h defines and configure options for them. It also fixes the problem where overriding prefix at "make install" time did not override it for sysconfdir. Removes some of the differences between sysconfdir and other variables, the rest will go away later. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10rename CONFIG_QEMU_PREFIXPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce confdir and confsuffixPaolo Bonzini1-6/+4
confsuffix was write-only, flesh it out. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: introduce sysconfsuffixPaolo Bonzini1-6/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: dyngen is long time gonePaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: avoid using exprPaolo Bonzini1-2/+9
Just a personal preference against duplicating hieroglyphics. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: bail out early on invalid -cpu optionPaolo Bonzini1-5/+2
It would fail later anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10configure: remove some bashismsAurelien Jarno1-2/+2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-08Fix --enable-user-pie compilation.Richard Henderson1-0/+3
We forgot to propagate -fpie to the libdis-user directory. Signed-off-by: Richard Henderson <rth@twiddle.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-01QMP: Introduce commands documentationJan Kiszka1-0/+4
One of the most important missing feature in QMP today is its supported commands documentation. The plan is to make it part of self-description support, however self-description is a big task we have been postponing for a long time now and still don't know when it's going to be done. In order not to compromise QMP adoption and make users' life easier, this commit adds a simple text documentation which fully describes all QMP supported commands. This is not ideal for a number of reasons (harder to maintain, text-only, etc) but does improve the current situation. To avoid at least divering from the user monitor help and texi snippets, QMP bits are also maintained inside qemu-monitor.hx, and hxtool is extended to generate a single text file from them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-19Fix cross compilationStefan Weil1-1/+11
This patch enhances the algorithm which finds the correct settings for SDL. For cross compilations (when cross_prefix is set), it looks for sdl-config with cross prefix. Here is the complete search order: $(cross_prefix}pkg-config (old, only used for cross compilation) ${cross_prefix}sdl_config (new, only used for cross compilation) pkg-config (old, needs PATH) sdl-config (old, needs PATH) Cross SDL packages (or the user) now can simply set a link (for example /usr/bin/i586-mingw32msvc-sdl-config -> /usr/i586-mingw32msvc/bin/sdl-config) which allows cross compilations without PATH modifications. Without the patch, configure and make (which calls configure) typically need a non-standard PATH. Failing to set this special PATH results in broken builds. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-05Avoid libaio for usermodePaul Brook1-1/+2
Linux AIO is aonly used by system emulation, so should not be linked into the userspace emulatior. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-05-03virtio-9p: Create a commandline option -fsdevGautham R Shenoy1-0/+1
This patch creates a new command line option named -fsdev to hold any file system specific information. The option will currently hold the following attributes: -fsdev fstype id=id,path=path_to_share where fstype: Type of the file system. id: Identifier used to refer to this fsdev path: The path on the host that is identified by this fsdev. [aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext] Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-27target-alpha: Enable NPTL.Richard Henderson1-0/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-25linux-user: Remove ELFLOAD32.Richard Henderson1-6/+0
The ABI-specific types used by linux_binprm and image_info are different after forcing TARGET_ABI32 on. Which means that the parameters that load_elf_binary_multi sees are not those that loader_exec passed. This is inherently broken and is more trouble than it's worth fixing. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-14Use correct cflags for kvm-kmod when cross compilingStefan Weil1-1/+1
Using $pkgconfig instead of pkg-config will use ${cross_prefix}pkg-config if that is available. This fix is needed for cross compilations without modified PATH. Without the fix, PATH must be modified to find the cross pkg-config before the native pkg-config. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08tcg-hppa: Finish the port.Richard Henderson1-1/+4
Delete inline functions from tcg-target.h that don't need to be there, move the others to tcg-target.c. Add 'Z', 'I', 'J' constraints for 0, signed 11-bit, and signed 5-bit respectively. Add GUEST_BASE support similar to ppc64, with the value stored in a register. Add missing registers to reg_alloc_order. Add support for 12-bit branch relocations. Add functions for synthetic operations: addi, mtctl, dep, shd, vshd, ori, andi, shifts, rotates, multiply, branches, setcond. Split out TLB reads from qemu_ld and qemu_st; fix argument loading for tlb external calls. Generate the prologue. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05Split TLB addend and target_phys_addr_tPaul Brook1-3/+0
Historically the qemu tlb "addend" field was used for both RAM and IO accesses, so needed to be able to hold both host addresses (unsigned long) and guest physical addresses (target_phys_addr_t). However since the introduction of the iotlb field it has only been used for RAM accesses. This means we can change the type of addend to unsigned long, and remove associated hacks in the big-endian TCG backends. We can also remove the host dependence from target_phys_addr_t. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-01tcg: initial ia64 supportAurelien Jarno1-14/+6
A few words about design choices: * On IA64, instructions should be grouped by bundle, and dependencies between instructions declared. A first version of this code tried to schedule instructions automatically, but was very complex and too invasive for the current common TCG code (ops not ending at instruction boundaries, code retranslation breaking already generated code, etc.) It was also not very efficient, as dependencies between TCG ops is not available. Instead the option taken by the current implementation does not try to fill the bundle by scheduling instructions, but by providing ops not available as an ia64 instruction, and by offering 22-bit constant loading for most of the instructions. With both options the bundle are filled at approximately the same level. * Up to 128 registers can be affected to a function on IA64, but TCG limits this number to 64, which is actually more than enough. The register affectation is the following: - r0: used to map a constant argument with value 0 - r1: global pointer - r2, r3: internal use - r4 to r6: not used to avoid saving them - r7: env structure - r8 to r11: free for TCG (call clobbered) - r12: stack pointer - r13: thread pointer - r14 to r31: free for TCG (call clobbered) - r32: reserved (return address) - r33: reserved (PFS) - r33 to r63: free for TCG * The IA64 architecture has only 64-bit registers and no 32-bit instructions (the only exception being cmp4). Therefore 64-bit registers and instructions are used for 32-bit ops. The adopted strategy is the same as the ABI, that is the higher 32 bits are undefined. Most ops (and, or, add, shl, etc.) can directly use the 64-bit registers, while some others have to sign-extend (sar, div, etc.) or zero-extend (shr, divu, etc.) the register first. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01ia64 disas supportAurelien Jarno1-0/+4
Taken from binutils SVN, using last GPLv2 version. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01vhost: vhost net supportMichael S. Tsirkin1-0/+37
This adds vhost net device support in qemu. Will be tied to tap device and virtio by following patches. Raw backend is currently missing, will be worked on/submitted separately. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-30Get bsd-user host page protection code working on FreeBSD hostsJuergen Lock1-0/+2
Use kinfo_getvmmap(3) on FeeBSD >= 7.x and /compat/linux/proc on older FreeBSD. (kinfo_getvmmap is preferred since /compat/linux/proc is usually only mounted on hosts also using the Linuxolator.) This patch is a bit hacky because the includes needed for kinfo_getvmmap conflict with other definitions in exec.c by default so I had to `trick around' a little, but I built the result in FreeBSD 6.4-stable and 7.2-stable tbs and on 8-stable on the host so the hacks at least should be stable. (If this is a problem maybe we could also move the kinfo_getvmmap invocations into a seperate source file but that would be more work...) Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27tcg-mips: add guest base supportAurelien Jarno1-0/+3
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26linux-user: add inotify_init1 syscall supportRiku Voipio1-0/+18
New syscall which gets actively used when you have a fresh kernel. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-21Compile most IDE devices only onceBlue Swirl1-0/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile disassemblers only onceBlue Swirl1-0/+25
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13configure: fix --sysconfdir specificationAndre Przywara1-1/+1
--sysconfdir requires a parameter (the path), this should be reflected in the case pattern. Reported-by: Frank Arnold <frank.arnold@amd.com> Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-12Remove userspace target_phys_addr_tPaul Brook1-1/+1
TARGET_PHYS_ADDR_BITS isn't meaningful for userspace emulation, so don't define it. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-09configure: Fix code which creates config.mak filesStefan Weil1-2/+2
These files are created by configure and grow unnecessarily at each new call of configure: roms/seabios/config.mak roms/vgabios/config.mak libhw32/config.mak libhw64/config.mak libhw32/config.mak and libhw64/config.mak set compiler options, and the wrong old code results in very long command lines. The new code always writes a new config.mak instead of appending to an existing one. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09configure: Fix wrong stderr redirectionStefan Weil1-2/+2
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-06Documentation: Modify rule for html output (better looking output format)Stefan Weil1-1/+1
To create html output from texi input, texi2html was used. Output from makeinfo looks cleaner, so replace the old rule and use makeinfo now. For those who want to use their own variant of html output, the macros MAKEINFO and MAKEINFOFLAGS allow customisation. Option "-I ." is not needed (the current directory is searched by default), so remove it. Please note that the build requirements changed, too: makeinfo is required for doc builds. texi2html is no longer used. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-19mingw32: Enable C99/POSIX format stringsStefan Weil1-0/+2
Starting with mingw32-runtime 3.15, C99/POSIX format strings (%zu, %lld, ...) are supported by defining __USE_MINGW_ANSI_STDIO=1. As QEMU uses such format strings, unconditionally define this macro. It won't hurt on older revisions of mingw32-runtime. Tested with manually installed mingw32-runtime 3.15 on debian (cross compiled + wine). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Debugging supportLuiz Capitulino1-0/+10
Add configure options (--enable-debug-mon and --disable-debug-mon) plus the MON_DEBUG() macro. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-08configure: fix the static compilation for sdlTeLeMan1-2/+5
The static compilation for sdl is broken after 79427693174a553d62f3da44aacd3f19ba8df3a7. Signed-off-by: TeLeMan <geleman@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-08configure: Add --enable-docs and --disable-docs to --helpDirk Ullrich1-0/+2
This patch adds the documentation-related options "--enable-docs" and "--disable-docs" to the help message of "configure". Signed-off-by: Dirk Ullrich <dirk.ullrich@googlemail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06Add -static earlier to LDFLAGS for compile_prog()Loïc Minier1-2/+3
Add -static to LDFLAGS earlier as to run the compile_prog() tests with this flags, this will avoid turning on features for which a shared library is available but not a static one. Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06configure: remove debugging code introduced in ↵Aurelien Jarno1-3/+0
aa527b65d8187b97d73f889b6cae7b6ac6f82d32 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06configure: fix compilation on hosts without -fstack-protector-allAurelien Jarno1-2/+5
Commit a0f291fc101a7ab3e40850a329da2cc2f2cd1f2d has enabled -fstack-protector-all on all targets, as the configure test is bogus. GCC only emits a warning and not an error if this option is not supported, so the configure scripts doesn't detect the problem. This patch changes the configure script to try the various flags with -Werror in addition to catch the possible warnings. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-01-28Solaris: test for presence of commands with has()Loïc Minier1-5/+7
Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Add and use has() and path_of() funcsLoïc Minier1-9/+43
Add has() and path_of() funcs and use them across configure; has() will test whether a command or builtin is available; path_of() will search the PATH for executables and return the full pathname if found. Signed-off-by: Loïc Minier <lool@dooz.org Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 22:38:42 +0000