| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 57d6a428 neglected to pass the given flags to blk_aio_prwv(),
which broke discard by WRITE SAME for scsi-disk (the UNMAP bit would be
ignored).
Commit fc1453cd introduced the same bug for blk_write_zeroes(). This is
used for 'qemu-img convert' without has_zero_init (e.g. on a block
device) and for preallocation=falloc in parallels.
Commit 8896e088 is the version for blk_co_write_zeroes(). This function
is only used in qemu-io.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add more useful error information to failure paths in vpc_open
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The check on the max_table_size field not being larger than required is
valid, and in accordance with the VHD spec. However, there have been
VHD images encountered in the wild that have an out-of-spec max table
size that is technically too large.
There is no issue in allowing this larger table size, as we also
later verify that the computed size (used for the pagetable) is
large enough to fit all sectors. In addition, max_table_entries
is bounds checked against SIZE_MAX and INT_MAX.
Remove the strict check, so that we can accomodate these sorts of
images that are benignly out of spec.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Grant Wu <grantwwu@gmail.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The old VHD_MAX_SECTORS value is incorrect, and is a throwback
to the CHS calculations. The VHD specification allows images up to 2040
GiB, which (using 512 byte sectors) corresponds to a maximum number of
sectors of 0xff000000, rather than the old value of 0xfe0001ff.
Update VHD_MAX_SECTORS to reflect the correct value.
Also, update comment references to the actual size limit, and correct
one compare so that we can have sizes up to the limit.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
XenConverter VHD images are another VHD image where current_size is
different from the CHS values in the the format header. Use
current_size as the default, by looking at the creator_app signature
field.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The vpc driver has two methods of determining virtual disk size. The
correct one to use depends on the software that generated the image
file. Add the XenServer creator_app signature so that image size is
correctly detected for those images.
Reported-by: Grant Wu <grantwwu@gmail.com>
Reported-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add more useful error information to failure paths in vpc_create().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commit 57d6a428 broke blk_aio_write_zeroes() because in some write
functions in the call path don't have an explicit length argument but
reuse qiov->size instead. Which is great, except that write_zeroes
doesn't have a qiov, which this commit interprets as 0 bytes.
Consequently, blk_aio_write_zeroes() didn't effectively do anything.
This patch introduces an explicit acb->bytes in BlkAioEmAIOCB and uses
that instead of acb->rwco.size.
The synchronous version of the function is okay because it does pass a
qiov (with the right size and a NULL pointer as its base).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
We reject backing file names with a length of more than 1023 characters
when opening a qcow2 file, so we should not produce such files
ourselves.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_pwrite_sync used to return zero or negative error, while blk_pwrite returns
the number of written bytes when successful. This caused VPC image creation
to fail spectacularly: it wrote the first 512 bytes, and then exited immediately
because of the non-zero answer from blk_pwrite. But the truly spectacular part
is that it returns a positive value (the 512 that blk_pwrite returned) causing
everyone to believe that it succeeded.
This fixes qemu-iotests with vpc format.
Fixes: b8f45cdf7827e39f9a1e6cc446f5972cc6144237
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Using the nested aio_poll() in coroutine is a bad idea. This patch
replaces the aio_poll loop in bdrv_drain with a BH, if called in
coroutine.
For example, the bdrv_drain() in mirror.c can hang when a guest issued
request is pending on it in qemu_co_mutex_lock().
Mirror coroutine in this case has just finished a request, and the block
job is about to complete. It calls bdrv_drain() which waits for the
other coroutine to complete. The other coroutine is a scsi-disk request.
The deadlock happens when the latter is in turn pending on the former to
yield/terminate, in qemu_co_mutex_lock(). The state flow is as below
(assuming a qcow2 image):
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain
while (has tracked request)
aio_poll()
In the scsi-disk coroutine, the qemu_co_mutex_lock() will never return
because the mirror coroutine is blocked in the aio_poll(blocking=true).
With this patch, the added qemu_coroutine_yield() allows the scsi-disk
coroutine to make progress as expected:
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain.enter
> schedule BH
> qemu_coroutine_yield()
> qcow2:qemu_co_mutex_lock.return
> ...
tracked request end
...
(resumed from BH callback)
bdrv_drain.return
...
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-2-git-send-email-famz@redhat.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Block layer patches for 2.6
# gpg: Signature made Tue 05 Apr 2016 16:32:25 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
crypto: Avoid memory leak on failure
qemu-iotests: 149: Use "/usr/bin/env python"
block: Forbid I/O throttling on nodes with multiple parents for 2.6
block: forbid x-blockdev-del from acting on DriveInfo
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit 7836857 introduced a memory leak due to invalid use of
Error vs. visit_type_end(). If visiting the intermediate
members fails, we clear the error and unconditionally use
visit_end_struct() on the same error object; but if that
cleanup succeeds, we then skip the qapi_free call.
Until a later patch adds visit_check_struct(), the only safe
approach is to use two separate error objects.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1459526222-30052-1-git-send-email-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The NBD protocol does not clearly document what will happen
if a client sends NBD_CMD_FLAG_FUA on NBD_CMD_FLUSH.
Historically, both the qemu and upstream NBD servers silently
ignored that flag, but that feels a bit risky. Meanwhile, the
qemu NBD client unconditionally sends the flag (without even
bothering to check whether the caller cares; at least with
NBD_CMD_WRITE the client only sends FUA if requested by a
higher layer).
There is ongoing discussion on the NBD list to fix the
protocol documentation to require that the server MUST ignore
the flag (unless the kernel folks can better explain what FUA
means for a flush), but until those doc improvements land, the
current nbd.git master was recently changed to reject the flag
with EINVAL (see nbd commit ab22e082), which now makes it
impossible for a qemu client to use FLUSH with an upstream NBD
server.
We should not send FUA with flush unless the upstream protocol
documents what it will do, and even then, it should be something
that the caller can opt into, rather than being unconditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459526902-32561-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
parse_uint_full() used to be included from qemu-common.h but was moved
to qemu/cutils.h in commit f348b6d1a53e5271cf1c9f9acc4646b4b98c1771
("util: move declarations out of qemu-common.h").
Cc: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1459341994-20567-3-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
error_setg() used to be included indirectly through qemu/osdep.h. Since
commit da34e65cb4025728566d6504a99916f6e7e1dd6a ("include/qemu/osdep.h:
Don't include qapi/error.h") it requires an explicit include.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1459341994-20567-2-git-send-email-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is optional so that it does not impede the null block driver's
performance unless this behavior is desired.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The only remaining users were block jobs (mirror and backup) which
unconditionally enabled WCE on the BlockBackend of the target image. As
these block jobs don't go through BlockBackend for their I/O requests,
they aren't affected by this setting anyway but always get a writeback
mode, so that call can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The previous patches have successively made blk->enable_write_cache the
true source for the information whether a writethrough mode must be
implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage
we're carrying around, so now's the time to remove it.
At the same time, we remove the 'cache.writeback' option parsing on the
BDS level as the only effect was setting the BDRV_O_CACHE_WB flag.
This change requires test cases that explicitly enabled the option to
drop it. Other than that and the change of the error message when
writethrough is enabled on the BDS level (from "Can't set writethrough
mode" to "doesn't support the option"), there should be no change in
behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Pass through the FUA flag to the lower layer so that the separate flush
can be saved in practically relevant cases where a (raw) format driver
sits on top of the protocol driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The NBD server already used to send a FUA flag when the writethrough
mode was set. This code was a remnant from the times where protocol
drivers actually had to implement writethrough modes. Since nowadays the
block layer sends flushes in writethrough mode and non-root nodes are
always writeback, this was mostly dead code - only mostly because if NBD
was configured to be used without a format, we sent _both_ FUA and an
explicit flush afterwards, which makes the code not technically dead,
but useless overhead.
This patch changes the code so that the block layer's FUA flag is
recognised and translated into a NBD FUA flag. The additional flush is
avoided now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This replaces the existing hack in the iscsi driver that sent the FUA
bit in writethrough mode and ignored the following flush in order to
optimise the number of roundtrips (see commit 73b5394e).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This function will allow drivers to implement BDRV_REQ_FUA natively
instead of sending a separate flush after the write.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Now that WCE is handled on the BlockBackend level, the flag is
meaningless for BDSes. As the schema requires us to fill the field,
we return an enabled write cache for them.
Note that this means that querying the BlockBackend name may return
writethrough as the cache information, whereas querying the node-name of
the root of that same BlockBackend will return writeback.
This may appear odd at first, but it actually makes sense because it
correctly repesents the layer that implements the WCE handling. This
becomes more apparent when you consider nodes that are the root node of
multiple BlockBackends, where each BB can have its own WCE setting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Whether a write cache is used or not is a decision that concerns the
user (e.g. the guest device) rather than the backend. It was already
logically part of the BB level as bdrv_move_feature_fields() always kept
it on top of the BDS tree; with this patch, the core of it (the actual
flag and the additional flushes) is also implemented there.
Direct callers of bdrv_open() must pass BDRV_O_CACHE_WB now if bs
doesn't have a BlockBackend attached.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
We don't want to silently ignore a flush error.
Also, there is little point in avoiding the flush for writethrough modes
and once WCE is moved to the BB layer, we definitely need the flush here
because bdrv_pwrite() won't involve one any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
All callers of blk_new_open() either don't rely on the WCE bit set after
blk_new_open() because they explicitly set it anyway, or they pass
BDRV_O_CACHE_WB unconditionally.
This patch changes blk_new_open() so that it always enables writeback
mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that
used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This patch introduces block driver that implement recording
and replaying of block devices' operations.
All block completion operations are added to the queue.
Queue is flushed at checkpoints and information about processed requests
is recorded to the log. In replay phase the queue is matched with
events read from the log. Therefore block devices requests are processed
deterministically.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
[ kwolf: Rebased onto modified and already applied part of the series ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds callback for flush request. This callback is responsible
for flushing whole block devices stack. bdrv_flush function does not
proceed to underlying devices. It should be performed by this callback
function, if needed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For a couple of releases we have been warning
Encrypted images are deprecated
Support for them will be removed in a future release.
You can use 'qemu-img convert' to convert your image to an unencrypted one.
This warning was issued by system emulators, qemu-img, qemu-nbd
and qemu-io. Such a broad warning was issued because the original
intention was to rip out all the code for dealing with encryption
inside the QEMU block layer APIs.
The new block encryption framework used for the LUKS driver does
not rely on the unloved block layer API for encryption keys,
instead using the QOM 'secret' object type. It is thus no longer
appropriate to warn about encryption unconditionally.
When the qcow/qcow2 drivers are converted to use the new encryption
framework too, it will be practical to keep AES-CBC support present
for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability
with older QEMU versions and liberation of data from existing encrypted
qcow2 files.
This change moves the warning out of the generic block code and
into the qcow/qcow2 drivers. Further, the warning is set to only
appear when running the system emulators, since qemu-img, qemu-io,
qemu-nbd are expected to support qcow2 encryption long term now that
the maint burden has been eliminated.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a block driver that is capable of supporting any full disk
encryption format. This utilizes the previously added block
encryption code, and at this time supports the LUKS format.
The driver code is capable of supporting any format supported
by the QCryptoBlock module, so it registers one block driver
for each format. This patch only registers the "luks" driver
since the "qcow" driver is there only for back-compatibility
with existing qcow built-in encryption.
New LUKS compatible volumes can be formatted using qemu-img
with defaults for all settings.
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0 demo.luks 10G
Alternatively the cryptographic settings can be explicitly
set
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0,cipher-alg=aes-256,\
cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \
demo.luks 10G
And query its size
$ qemu-img info demo.img
image: demo.img
file format: luks
virtual size: 10G (10737418240 bytes)
disk size: 132K
encrypted: yes
Note that it was not necessary to provide the password
when querying info for the volume. The password is only
required when performing I/O on the volume
All volumes created by this new 'luks' driver should be
capable of being opened by the kernel dm-crypt driver.
The only algorithms listed in the LUKS spec that are
not currently supported by this impl are sha512 and
ripemd160 hashes and cast6 cipher.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[ kwolf - Added #include to resolve conflict with da34e65c ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When opening an image it is useful to know whether the caller
intends to perform I/O on the image or not. In the case of
encrypted images this will allow the block driver to avoid
having to prompt for decryption keys when we merely want to
query header metadata about the image. eg qemu-img info
This flag is enforced at the top level only, since even if
we don't want todo I/O on the 'qcow2' file payload, the
underlying 'file' driver will still need todo I/O to read
the qcow2 header, for example.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_query_blk_stats() does not need access to all of BlockStats,
BlockDeviceStats is enough and is what this function is actually
supposed to fill.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is the only instance of bdrv_query_blk_stats() accessing anything
in the BlockStats structure other than s->stats, so let us move it to
its caller (where it makes just as much sense) allowing us to make
bdrv_query_blk_stats() take a pointer to the BlockDeviceStats instead of
BlockStats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Using heap instead of stack for better safety.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fix two places to use literal printf format when possible.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The function is unused since commit f21d96d0 ('block: Use BdrvChild in
BlockBackend').
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Mac OS X can be picky when it comes to allowing the user
to use physical devices in QEMU. Most mounted volumes
appear to be off limits to QEMU. If an issue is detected,
a message is displayed showing the user how to unmount a
volume. Now QEMU uses both CD and DVD media.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
# gpg: Signature made Tue 29 Mar 2016 01:48:09 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
* remotes/cody/tags/block-pull-request:
qemu-iotests: add no-op streaming test
qemu-iotests: fix test_stream_partial()
block: never cancel a streaming job without running stream_complete()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We need to call stream_complete() in order to do all the necessary
clean-ups, even if there's an early failure. At the moment it's only
useful to make sure that s->backing_file_str is not leaked, but it
will become more important if we introduce support for streaming to
any intermediate node.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 2abedf2debc65c250560237f31a8e6756883c8fc.1458566441.git.berto@igalia.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
|
|
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all
that to qemu/iov.h and drop the ill-advised include. Include
qemu/iov.h where the QEMUIOVector stuff is now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
If there's an I/O error in one of Quorum children then QEMU
should emit QUORUM_REPORT_BAD. However this is not working with
read-pattern=fifo. This patch fixes this problem.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: d57e39e8d3e8564003a1e2aadbd29c97286eb2d2.1458034554.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
