summaryrefslogtreecommitdiff
path: root/block/qapi.c
AgeCommit message (Collapse)AuthorFilesLines
2015-06-22qerror: Finally unused, clean upMarkus Armbruster1-6/+0
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake1-1/+1
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-12throttle: add the name of the ThrottleGroup to BlockDeviceInfoAlberto Garcia1-0/+3
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 172df91f09c69c6f0440a697bbd1b3f95b077ee4.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12throttle: Add throttle group supportAlberto Garcia1-1/+4
The throttle group support use a cooperative round robin scheduling algorithm. The principles of the algorithm are simple: - Each BDS of the group is used as a token in a circular way. - The active BDS computes if a wait must be done and arms the right timer. - If a wait must be done the token timer will be armed so the token will become the next active BDS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11qobject: Clean up around qtype_codeMarkus Armbruster1-3/+0
QTYPE_NONE is a sentinel value. No QObject has this type code. Document it properly. Fix dump_qobject() to abort() on QTYPE_NONE, just like for any other invalid type code. Fix to_json() to abort() on all invalid type codes, not just QTYPE_MAX. Clean up Property member qtype's type: it's a qtype_code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-04-28qmp: fill in the image field in BlockDeviceInfoAlberto Garcia1-21/+25
The image field in BlockDeviceInfo is supposed to contain an ImageInfo object. However that is being filled in by bdrv_query_info(), not by bdrv_block_device_info(), which is where BlockDeviceInfo is actually created. Anyone calling bdrv_block_device_info() directly will get a null image field. As a consequence of this, the HMP command 'info block -n -v' crashes QEMU. This patch moves the code that fills in that field from bdrv_query_info() to bdrv_block_device_info(). Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 1429271563-3765-1-git-send-email-berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19block/qapi: Fix Sparse warningStefan Weil1-1/+1
Sparse reports this warning: block/qapi.c:417:47: warning: too long initializer-string for array of char(no space for nul char) Replacing the string by an array of characters fixes this warning. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-06block: add event when disk usage exceeds thresholdFrancesco Romani1-0/+3
Managing applications, like oVirt (http://www.ovirt.org), make extensive use of thin-provisioned disk images. To let the guest run smoothly and be not unnecessarily paused, oVirt sets a disk usage threshold (so called 'high water mark') based on the occupation of the device, and automatically extends the image once the threshold is reached or exceeded. In order to detect the crossing of the threshold, oVirt has no choice but aggressively polling the QEMU monitor using the query-blockstats command. This lead to unnecessary system load, and is made even worse under scale: deployments with hundreds of VMs are no longer rare. To fix this, this patch adds: * A new monitor command `block-set-write-threshold', to set a mark for a given block device. * A new event `BLOCK_WRITE_THRESHOLD', to report if a block device usage exceeds the threshold. * A new `write_threshold' field into the `BlockDeviceInfo' structure, to report the configured threshold. This will allow the managing application to use smarter and more efficient monitoring, greatly reducing the need of polling. [Updated qemu-iotests 067 output to add the new 'write_threshold' property. --Stefan] [Changed g_assert_false() to !g_assert() to fix the build on older glib versions. --Kevin] Signed-off-by: Francesco Romani <fromani@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: add accounting for merged requestsPeter Lieven1-0/+2
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: update string sizes for filename,backing_file,exact_filenameJeff Cody1-2/+2
The string field entries 'filename', 'backing_file', and 'exact_filename' in the BlockDriverState struct are defined as 1024 bytes. However, many places that use these values accept a maximum of PATH_MAX bytes, so we have a mixture of 1024 byte and PATH_MAX byte allocations. This patch makes the BlockDriverStruct field string sizes match usage. This patch also does a few fixes related to the size that needs to happen now: * the block qapi driver is updated to use PATH_MAX bytes * the qcow and qcow2 drivers have an additional safety check * the block vvfat driver is updated to use PATH_MAX bytes for the size of backing_file, for systems where PATH_MAX is < 1024 bytes. * qemu-img uses PATH_MAX rather than 1024. These instances were not changed to be dynamically allocated, however, as the extra temporary 3K in stack usage for qemu-img does not seem worrisome. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-23block: qapi - move string allocation from stack to the heapJeff Cody1-3/+4
Rather than declaring 'backing_filename2' on the stack in bdrv_query_image_info(), dynamically allocate it on the heap. Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-13block: JSON filenames and relative backing filesMax Reitz1-1/+6
When using a relative backing file name, qemu needs to know the directory of the top image file. For JSON filenames, such a directory cannot be easily determined (e.g. how do you determine the directory of a qcow2 BDS directly on top of a quorum BDS?). Therefore, do not allow relative filenames for the backing file of BDSs only having a JSON filename. Furthermore, BDS::exact_filename should be used whenever possible. If BDS::filename is not equal to BDS::exact_filename, the former will always be a JSON object. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/qapi: Add cache information to query-blockKevin Wolf1-0/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-10qmp: Add optional switch "query-nodes" in query-blockstatsFam Zheng1-7/+13
This bool option will allow query all the node names. It iterates all the BDSes that are assigned a name, also in this case don't query up the backing chain. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Include "node-name" if present in query-blockstatsFam Zheng1-0/+5
Node name is a better identifier of BDS. We will want to query statistics of a BDS node buried in the BDS graph, so reporting the node's name if there is one will do the trick. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-24Revert "qemu-img info: show nocow info"Kevin Wolf1-26/+0
This reverts commit 000c4dfff4d7686e2fba3066a477a1290ed60622. The main reason for reverting this commit before the 2.2 release is that it adds a QAPI interface that we don't want to keep: The 'nocow' flag doesn't generally make sense for block nodes, but only for the raw-posix driver. It should therefore be part of ImageInfoSpecific rather than ImageInfo. The commit contains more problems, but unlike the API stability issue they wouldn't justify reverting it. Conflicts: block/qapi.c Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20block: Lift device model API into BlockBackendMarkus Armbruster1-4/+4
Move device model attachment / detachment and the BlockDevOps device model callbacks and their wrappers from BlockDriverState to BlockBackend. Wrapper calls in block.c change from bdrv_dev_FOO_cb(bs, ...) to if (bs->blk) { bdrv_dev_FOO_cb(bs->blk, ...); } No change, because both bdrv_dev_change_media_cb() and bdrv_dev_resize_cb() do nothing when no device model is attached, and a device model can be attached only when bs->blk. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block/qapi: Convert qmp_query_block() to BlockBackendMarkus Armbruster1-7/+8
Much more command code needs conversion. I start with this one because it's using bdrv_dev_* functions, which I'm about to lift into BlockBackend. While there, give bdrv_query_info() internal linkage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster1-3/+3
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_Benoît Canet1-8/+8
The middle term goal is to move the BlockAcctStats structure in the device models. (Capturing I/O accounting statistics in the device models is good for billing) This patch make a small step in this direction by removing a reference to BDRV. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Keith Busch <keith.busch@intel.com> CC: Anthony Liguori <aliguori@amazon.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Markus Armbruster <armbru@redhat.com> CC: Alexander Graf <agraf@suse.de>i Signed-off-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10block: Extract the BlockAcctStats structureBenoît Canet1-9/+10
Extract the block accounting statistics into a structure so the block device models can hold them in the future. CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-15qemu-img info: show nocow infoChunyan Liu1-0/+26
Add nocow info in 'qemu-img info' output to show whether the file currently has NOCOW flag set or not. Signed-off-by: Chunyan Liu <cyliu@suse.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15block: Avoid bdrv_get_geometry() where errors should be detectedMarkus Armbruster1-4/+10
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or bdrv_getlength() instead where that's obviously inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27block: acquire AioContext in qmp_query_blockstats()Stefan Hajnoczi1-0/+4
Make query-blockstats safe for dataplane by acquiring the BlockDriverState's AioContext. This ensures that the dataplane IOThread and the main loop's monitor code do not race. Note the assumption that acquiring the drive's BDS AioContext also protects ->file and ->backing_hd. This assumption is made by other aio_context_acquire() callers too. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27block: make bdrv_query_stats() staticStefan Hajnoczi1-1/+1
This function is only called from block/qapi.c. There is no need to keep it public. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-30block/qapi: Plug memory leak in dump_qobject() case QTYPE_QERRORMarkus Armbruster1-0/+1
Introduced in commit a8d8ecb. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19block: optimize zero writes with bdrv_write_zeroesPeter Lieven1-0/+1
this patch tries to optimize zero write requests by automatically using bdrv_write_zeroes if it is supported by the format. This significantly speeds up file system initialization and should speed zero write test used to test backend storage performance. I ran the following 2 tests on my internal SSD with a 50G QCOW2 container and on an attached iSCSI storage. a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX QCOW2 [off] [on] [unmap] ----- runtime: 14secs 1.1secs 1.1secs filesize: 937M 18M 18M iSCSI [off] [on] [unmap] ---- runtime: 9.3s 0.9s 0.9s b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct QCOW2 [off] [on] [unmap] ----- runtime: 246secs 18secs 18secs filesize: 51G 192K 192K throughput: 203M/s 2.3G/s 2.3G/s iSCSI* [off] [on] [unmap] ---- runtime: 8mins 45secs 33secs throughput: 106M/s 1.2G/s 1.6G/s allocated: 100% 100% 0% * The storage was connected via an 1Gbit interface. It seems to internally handle writing zeroes via WRITESAME16 very fast. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-30block: Use error_abort in bdrv_image_info_specific_dump()Max Reitz1-2/+1
Currently, bdrv_image_info_specific_dump() uses an error variable for visit_type_ImageInfoSpecific, but ignores the result. As this function is used here with an output visitor to transform the ImageInfoSpecific object to a generic QDict, an error should actually be impossible. It is however better to assert that this is indeed the case. This is done by this patch using error_abort instead of an unused local Error variable. Signed-off-by: Max Reitz <mreitz@redhat.com> Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-2/+2
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-24qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.Benoît Canet1-54/+55
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qapi: Add "backing" to BlockStatsFam Zheng1-0/+5
Currently there is no way to query BlockStats of the backing chain. This adds "backing" field into BlockStats to make it possible. The comment of "parent" is reworded. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-29qapi: Change BlockDirtyInfo to listFam Zheng1-0/+5
We have multiple dirty bitmaps in BDS now, switch QAPI to allow query it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-29block: per caller dirty bitmapFam Zheng1-8/+0
Previously a BlockDriverState has only one dirty bitmap, so only one caller (e.g. a block job) can keep track of writing. This changes the dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the lifecycle is managed with these new functions: bdrv_create_dirty_bitmap bdrv_release_dirty_bitmap Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap. In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument is added to these functions, since each caller has its own dirty bitmap: bdrv_get_dirty bdrv_dirty_iter_init bdrv_get_dirty_count bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will internally walk the list of all dirty bitmaps and set them one by one. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11block/qapi: Human-readable ImageInfoSpecific dumpMax Reitz1-0/+121
Add a function for generically dumping the ImageInfoSpecific information in a human-readable format to block/qapi.c. Use this function in bdrv_image_info_dump and qemu-io-cmds.c:info_f to allow qemu-img info resp. qemu-io -c info to print that format specific information. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11block: Add bdrv_get_specific_infoMax Reitz1-0/+3
Add a function for retrieving an ImageInfoSpecific object from a block driver. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-06block: Add iops_size to do the iops accounting for a given io size.Benoît Canet1-0/+3
This feature can be used in case where users are avoiding the iops limit by doing jumbo I/Os hammering the storage backend. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: Add support for throttling burst max in QMP and the command line.Benoît Canet1-0/+26
The max parameter of the leaky bucket throttling algorithm can be used to allow the guest to do bursts. The max value is a pool of I/O that the guest can use without being throttled at all. Throttling is triggered once this pool is empty. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: Enable the new throttling code in the block layer.Benoît Canet1-12/+9
Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07qmp: add ImageInfo in BlockDeviceInfo used by query-blockWenchao Xia1-3/+47
Now image info will be retrieved as an embbed json object inside BlockDeviceInfo, backing chain info and all related internal snapshot info can be got in the enhanced recursive structure of ImageInfo. New recursive member *backing-image is added to reflect the backing chain status. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add image info query function bdrv_query_image_info()Wenchao Xia1-6/+37
This patch adds function bdrv_query_image_info(), which will retrieve image info in qmp object format. The implementation is based on the code moved from qemu-img.c, but uses block layer function to get snapshot info. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add snapshot info query function bdrv_query_snapshot_info_list()Wenchao Xia1-13/+42
This patch adds function bdrv_query_snapshot_info_list(), which will retrieve snapshot info of an image in qmp object format. The implementation is based on the code moved from qemu-img.c with modification to fit more for qmp based block layer API. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-04block: dump snapshot and image info to specified outputWenchao Xia1-30/+36
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now, some internal buffers are still used for format control, which have no chance to be truncated. As a result, these two functions have no more issue of truncation, and they can be used by both qemu and qemu-img with correct parameter specified. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move qmp and info dump related code to block/qapi.cWenchao Xia1-0/+360
This patch is a pure code move patch, except following modification: 1 get_human_readable_size() is changed to static function. 2 dump_human_image_info() is renamed to bdrv_image_info_dump(). 3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs) instead of direct traverse of global array 'bdrv_states'. 4 collect_snapshots() and collect_image_info() are renamed, unused parameter *fmt in collect_image_info() is removed. 5 code style fix. To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H instead of QAPI_H. Now block.h and snapshot.h are at the same level in include path, block_int.h and qapi.h will both include them. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 19:16:04 +0000