summaryrefslogtreecommitdiff
path: root/QMP
AgeCommit message (Collapse)AuthorFilesLines
2013-07-15net: add support of mac-programming over macvtap in QEMU sideAmos Kong1-0/+17
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-07correct RTC_CHANGE_EVENT description (v2)Marcelo Tosatti1-1/+2
Fix RTC_CHANGE event description to match implementation. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-05-15qmp: fix handling of cmd with Equals in qmp-shellZhangleiqiang1-0/+2
qmp: fix handling of cmd with equal mark in qmp-shell qmp-shell splits the argument and value of input command by equal mark("="). But there are commands whose values include equal mark themselves, and the json built by qmp-shell will not correct. For example, when using NBD as the target of block-backup command, the input "block-backup target=nbd+unix:///drive0?socket=/tmp/nbd.sock" will fail, because the json built will be as follows: { "execute":"block-backup", "arguments":{"target":"nbd+unix:///drive0?socket"} } Fix it by joining the sections split by equal mark excluding the first section in __build_cmd function when the length of sections is larger than two. Signed-off-by: zhangleiqiang <zhangleiqiang@huawei.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-30add a new qevent: QEVENT_GUEST_PANICKEDHu Tao1-0/+14
This event will be emited when qemu detects guest panic. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: cf0bc45ecf9ecd3699bc72dc39f8cbab8ed79d8c.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-0/+18
virtio,pci,qom Work by Alex to support VGA assignment, pci and virtio fixes by Stefan, Jason and myself, and a new qmp event for hotplug support by myself. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Alex Williamson (13) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: (23 commits) pcie: Add endpoint capability initialization wrapper roms: switch oldnoconfig to olddefconfig pcie: Mangle types to match topology pci: Create and use API to determine root buses pci: Create pci_bus_is_express helper pci: Q35, Root Ports, and Switches create PCI Express buses pci: Allow PCI bus creation interfaces to specify the type of bus pci: Move PCI and PCIE type defines pci: Create and register a new PCI Express TypeInfo exec: assert that RAMBlock size is non-zero pci: refuse empty ROM files pci_bridge: Remove duplicate IRQ swizzle function pci_bridge: Use a default map_irq function pci: Fix INTx routing notifier recursion pci_bridge: drop formatting from source pci_bridge: factor out common code pci: Teach PCI Bridges about VGA routing pci: Add PCI VGA helpers virtio-pci: guest notifier mask without non-irqfd virtio-net: remove layout assumptions for mq ctrl ...
2013-03-26qmp: add path to device_deleted eventMichael S. Tsirkin1-1/+3
Add QOM path to device deleted event. It now becomes useful to report it for devices which don't have an ID assigned. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-25qmp: fix handling of boolean values in qmp-shellIgor Mammedov1-1/+6
qmp-shell converts only integer arguments and the rest is assumed to be strings which are faithfully sent as quoted strings by json. But QEMU refuses to accept qmp command with boolean argument whose value is escaped as string. Fix it by special-casing true/false keywords and store value as corresponding boolean. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-17qdev: DEVICE_DELETED eventMichael S. Tsirkin1-0/+16
libvirt has a long-standing bug: when removing the device, it can request removal but does not know when the removal completes. Add an event so we can fix this in a robust way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-10-24qmp: add pull_event functionPaolo Bonzini1-0/+20
This function is unlike get_events in that it makes it easy to process one event at a time. This is useful in the mirroring test cases, where we want to process just one event (BLOCK_JOB_ERROR) and leave the others to a helper function. Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: introduce BLOCK_JOB_READY eventPaolo Bonzini1-0/+18
Even for jobs that need to be manually completed, management may want to take care itself of the completion, not requiring the user to issue a command to terminate the job. In this case we want to avoid that they poll us continuously, waiting for completion to become available. Thus, add a new event that signals the phase switch and the availability of the block-job-complete command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24qmp: fix __accept() in qmp.pyJeff Cody1-0/+1
In QEMUMonitorProtocol, commit e9d17b6 removed the __sockfile creation from __negotiate_capabilities(), which breaks _accept(). This causes failures in qemu-io python based tests (i.e. tests 030 and 040). This patch creates the sockfile in __accept() as well. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-04Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-2/+26
* kwolf/for-anthony: (30 commits) qemu-iotests: add tests for streaming error handling qemu-iotests: map underscore to dash in QMP argument names blkdebug: process all set_state rules in the old state stream: add on-error argument block: introduce block job error iostatus: reorganize io error code iostatus: change is_read to a bool iostatus: move BlockdevOnError declaration to QAPI iostatus: rename BlockErrorAction, BlockQMPEventAction qemu-iotests: add test for pausing a streaming operation qmp: add block-job-pause and block-job-resume block: add support for job pause/resume qmp: add 'busy' member to BlockJobInfo block: add block_job_query block: move job APIs to separate files block: fix documentation of block_job_cancel_sync qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE qemu-iotests: add initial tests for live block commit QAPI: add command for live block commit, 'block-commit' block: helper function, to find the base image of a chain ...
2012-09-28block: introduce block job errorPaolo Bonzini1-0/+22
The following behaviors are possible: 'report': The behavior is the same as in 1.1. An I/O error, respectively during a read or a write, will complete the job immediately with an error code. 'ignore': An I/O error, respectively during a read or a write, will be ignored. For streaming, the job will complete with an error and the backing file will be left in place. For mirroring, the sector will be marked again as dirty and re-examined later. 'stop': The job will be paused and the job iostatus will be set to failed or nospace, while the VM will keep running. This can only be specified if the block device has rerror=stop and werror=stop or enospc. 'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others. In all cases, even for 'report', the I/O error is reported as a QMP event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR. It is possible that while stopping the VM a BLOCK_IO_ERROR event will be reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa. This is not really avoidable since stopping the VM completes all pending I/O requests. In fact, it is already possible now that a series of BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop calls bdrv_drain_all and this can generate further errors. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28QAPI: add command for live block commit, 'block-commit'Jeff Cody1-2/+4
The command for live block commit is added, which has the following arguments: device: the block device to perform the commit on (mandatory) base: the base image to commit into; optional (if not specified, it is the underlying original image) top: the top image of the commit - all data from inside top down to base will be committed into base (mandatory for now; see note, below) speed: maximum speed, in bytes/sec Note: Eventually this command will support merging down the active layer, but that code is not yet complete. If the active layer is passed in as top, then an error will be returned. Once merging down the active layer is supported, the 'top' argument may become optional, and default to the active layer. The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will be emitted. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-26Add qemu-ga-client scriptRyota Ozaki1-0/+299
This is an easy-to-use QEMU guest agent client written in Python. It simply provides commands to call guest agent functions like ping, fsfreeze and shutdown. Additionally, it provides extra useful commands, e.g, cat, ifconfig and reboot, by using guet agent functions. Examples: $ export QGA_CLIENT_ADDRESS=/tmp/qga.sock $ qemu-ga-client ping $ qemu-ga-client cat /etc/resolv.conf # Generated by NetworkManager nameserver 10.0.2.3 $ qemu-ga-client fsfreeze status thawed $ qemu-ga-client fsfreeze freeze 2 filesystems frozen The script communicates with a guest agent by means of qmp.QEMUMonitorProtocol. Every commands are called with timeout (3 sec.) to avoid blocking. The script always calls sync command prior to issuing an actual command (except for ping which doesn't need sync). Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-26Support settimeout in QEMUMonitorProtocolRyota Ozaki1-0/+5
This method is used in the following qemu-ga-client script to implement non-blocking operations. Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-26Make negotiation optional in QEMUMonitorProtocolRyota Ozaki1-3/+4
This is a preparation for qemu-ga-client which uses QEMUMonitorProtocol class. The class tries to negotiate capabilities on connect, however, qemu-ga doesn't suppose it and fails. This change makes the negotiation optional, though it's still performed by default for compatibility. Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05Add support for pretty-printing response in qmp-shellDaniel P. Berrange1-13/+33
Add a '-p' arg to the QMP/qmp-shell test program, which uses the python pprint module to pretty-print the dictionary returned from a command $ qmp-shell -p /tmp/qemu Welcome to the QMP low-level shell! Connected to QEMU 1.1.50 (QEMU) query-cpus { u'return': [ { u'CPU': 0, u'current': True, u'halted': True, u'pc': 1048556, u'thread_id': 7108}]} Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qmp: add SUSPEND_DISK eventLuiz Capitulino1-0/+14
Emitted when the guest makes a request to enter S4 state. There are three possible ways of having this event, as described here: http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html I've decided to add a new event and make it indepedent of SHUTDOWN. This means that the SHUTDOWN event will eventually follow the SUSPEND_DISK event. I've choosen this way because of two reasons: 1. Having an indepedent event makes it possible to query for its existence by using query-events 2. In the future, we may allow the user to change what QEMU should do as a result of the guest entering S4. So it's a good idea to keep both events separated Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qmp: qmp-events.txt: add missing doc for the SUSPEND eventLuiz Capitulino1-0/+12
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-13qmp: qmp-events.txt: put events in alphabetical orderLuiz Capitulino1-136/+130
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-13qmp: emit the WAKEUP event when the guest is put to runLuiz Capitulino1-0/+13
Today, the WAKEUP event is emitted when a wakeup _request_ is made. This could be the system_wakeup command, for example. A better semantic would be to emit the event when the guest is already running, as that's what matters in the end. This commit does that change. In theory, this could break compatibility. In practice, it shouldn't happen though, as clients shouldn't rely on timing characteristics of the events. That is, a client relying that the guest is not running when the event arrives may break if the event arrives after the guest is already running. This commit also adds the missing documentation for the WAKEUP event. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-13qmp: switch to the new error format on the wireLuiz Capitulino1-7/+3
IMPORTANT: this BREAKS QMP's compatibility for the error response. This commit changes QMP's wire protocol to make use of the simpler error format introduced by previous commits. There are two important (and mostly incompatible) changes: 1. Almost all error classes have been replaced by GenericError. The only classes that are still supported for compatibility with libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap, DeviceNotFound and MigrationExpected 2. The 'data' field of the error dictionary is gone As an example, an error response like: { "error": { "class": "DeviceNotRemovable", "data": { "device": "virtio0" }, "desc": "Device 'virtio0' is not removable" } } Will now be emitted as: { "error": { "class": "GenericError", "desc": "Device 'virtio0' is not removable" } } Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-06-15Add event notification for guest balloon changesDaniel P. Berrange1-0/+18
After setting a balloon target value, applications have to continually poll 'query-balloon' to determine whether the guest has reacted to this request. The virtio-balloon backend knows exactly when the guest has reacted though, and thus it is possible to emit a JSON event to tell the mgmt application whenever the guest balloon changes. This introduces a new 'qemu_balloon_changed()' API which is to be called by balloon driver backends, whenever they have a change in balloon value. This takes the 'actual' balloon value, as would be found in the BalloonInfo struct. The qemu_balloon_change API emits a JSON monitor event which looks like: {"timestamp": {"seconds": 1337162462, "microseconds": 814521}, "event": "BALLOON_CHANGE", "data": {"actual": 944766976}} * balloon.c, balloon.h: Introduce qemu_balloon_changed() for emitting balloon change events on the monitor * hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever the guest changes the balloon actual value * monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-26qom: quick and dirty QOM filesystem based on FUSEAnthony Liguori1-0/+138
Here's an example session: anthony@titi:~/git/qemu/QMP$ QMP_SERVER=/tmp/server.sock ./qom-fuse tmp anthony@titi:~/git/qemu/QMP$ ls tmp machine sysbus type anthony@titi:~/git/qemu/QMP$ ls tmp/machine i440fx peripheral peripheral-anon type unattached anthony@titi:~/git/qemu/QMP$ ls tmp/machine/i440fx ioapic parent_bus pci.0 type anthony@titi:~/git/qemu/QMP$ ls tmp/machine/i440fx/pci.0 child[0] child[1] child[2] child[3] child[4] child[5] type anthony@titi:~/git/qemu/QMP$ ls tmp/machine/i440fx/pci.0/child[4] addr legacy-addr multifunction type command_serr_enable legacy-command_serr_enable parent_bus ide.0 legacy-multifunction rombar ide.1 legacy-romfile romfile anthony@titi:~/git/qemu/QMP$ cat tmp/machine/i440fx/pci.0/child[4]/type piix3-ide anthony@titi:~/git/qemu/QMP$ ls -al tmp/machine/i440fx/pci.0/child\[4\]/parent_bus lrwxr-xr-x 2 anthony anthony 4096 1969-12-31 18:00 tmp/machine/i440fx/pci.0/child[4]/parent_bus -> ../../../machine/i440fx/pci.0 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-27qmp: document strict parsingPaolo Bonzini1-3/+17
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-22qmp: add DEVICE_TRAY_MOVED eventLuiz Capitulino1-0/+18
It's emitted whenever the tray is moved by the guest or by HMP/QMP commands. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2012-02-22qom: add test toolsAnthony Liguori3-0/+195
Tested-by: Andreas F=E4rber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22qmp: make qmp.py easier to useAnthony Liguori1-0/+6
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi1-0/+24
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi1-0/+29
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-06qmp: add test tool for QMPMark Wu1-0/+126
Anthony wrote this quickly to aid in testing. It's similar to qmp-shell with a few important differences: 1) It is not interactive. That makes it useful for scripting. 2) qmp-shell: (QEMU) set_password protocol=vnc password=foo 3) qmp: $ qmp set_password --protocol=vnc --password=foo 4) Extensible, git-style interface. If an invalid command name is passed, it will try to exec qmp-$1. 5) It attempts to pretty print the JSON responses in a shell friendly format such that tools can work with the output. Hope others will also find it useful. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-02fix spelling in QMP sub directoryDong Xu Wang1-1/+1
Cc: Markus Armbruster <armbru@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-01QMP: add server mode to QEMUMonitorProtocolStefan Hajnoczi1-11/+32
QEMU supports socket chardevs that establish connections like a server or a client. The QEMUMonitorProtocol class only supports connecting as a client. It is not possible to connect race-free when launching QEMU since trying to connect before QEMU has bound and is listening on the socket results in failure. Add the QEMUMonitorProtocol(server=True) argument to bind and listen on the socket. The QEMU process can then be launched and connects to the already existing QMP socket without a race condition: qmp = qmp.QEMUMonitorProtocol(monitor_path, server=True) popen = subprocess.Popen(args) qmp.accept() Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-06-01QMP: add get_events(wait=True) optionStefan Hajnoczi1-3/+8
The get_events() function polls for new QMP events and then returns. It can be useful to wait for the next QMP event so add the boolean 'wait' keyword argument. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-12-09spice: connection events.Gerd Hoffmann1-0/+64
This patch adds support for connection events to spice. The events are quite simliar to the vnc events. Unlike vnc spice uses multiple tcp channels though. qemu will report every single tcp connection (aka spice channel). If you want track spice sessions only you can filter for the main channel (channel-type == 1). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-11-17QMP/qmp-shell: Introduce HMP modeLuiz Capitulino1-1/+78
In which qmp-shell will exclusively use the HMP passthrough feature, this is useful for testing. Example: # ./qmp-shell -H qmp-sock Welcome to the HMP shell! Connected to QEMU 0.13.50 (QEMU) info network VLAN 0 devices: user.0: net=10.0.2.0, restricted=n e1000.0: model=e1000,macaddr=52:54:00:12:34:56 Devices not on any VLAN: (QEMU) Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-11-17QMP: Drop vm-info example scriptLuiz Capitulino2-37/+1
It's broken and not really useful, let's just drop it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-11-17QMP: Revamp the qmp-shell scriptLuiz Capitulino1-35/+144
This commit updates the qmp-shell script to use the new interface introduced by the last commit. Additionally, the following fixes/features are also introduced: o TCP sockets support o Update/add documentation o Simple command-line completion o Fix a number of unhandled errors Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-11-17QMP: Revamp the Python class exampleLuiz Capitulino1-51/+106
This commit simplifies and fixes a number of problems in the Python QEMUMonitorProtocol example class. It's almost a rewrite and it DOES BREAK the qmp-shell script (which is going to be fixed in the next commit). However, I'm not going to split this in different commits because it could get up to 10 commits, it's really not worth it for a simple demo class. Highlights: o TCP sockets support o QMP events support o Add documentation o Fix a number of unhandled errors o Simplify methods that send commands to the Monitor Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-22Trivial fix for QMP/qmp-events.txtHidetoshi Seto1-1/+1
Fix example of STOP event that was just copy-and-pasted. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01QMP/README: Update QMP homepage addressLuiz Capitulino1-1/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-10-01Monitor: Introduce the qmp-commands.hx fileLuiz Capitulino1-1/+1
This file contains a copy of the following information from the qemu-monitor.hx file: o QObject handlers entries o QMP documentation (all SQMP/EQMP sections) Right now it's only used to generate the QMP docs in QMP/, but next commits will turn this into QMP's command dispatch table. It's important to note that QObject handlers entries are going to get duplicated: they will exist in both QMP's and HMP's dispatch tables. This will be fixed in the near future, when we add a proper QMP call interface and HMP is converted to use it. This way we can completely drop QObject handlers entries from HMP's tables. NOTE: HMP specific constructions, like "q|quit", have been dropped. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-08-22QMP: Update README fileLuiz Capitulino1-23/+48
A number of changes I prefer to do in one shot: - Fix example - Small clarifications - Add multiple monitors example - Add 'Development Process' section Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-01QMP: Fix python helper /wrt long return stringsJan Kiszka1-1/+5
Remove the arbitrary limitation of 1024 characters per return string and read complete lines instead. Required for device_show. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01QMP: Teach basic capability negotiation to python exampleJan Kiszka2-0/+2
As sending "qmp_capabilities" on session start became mandatory, both python examples were broken. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-13monitor/QMP: Drop info hpet / query-hpetJan Kiszka1-1/+1
This command was of minimal use before, now it is useless as the hpet become a qdev device and is thus easily discoverable. We should definitely not set query-hpet in QMP's stone, and there is also no good reason to keep it for the interactive monitor. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-01QMP: Introduce commands documentationJan Kiszka1-2/+3
One of the most important missing feature in QMP today is its supported commands documentation. The plan is to make it part of self-description support, however self-description is a big task we have been postponing for a long time now and still don't know when it's going to be done. In order not to compromise QMP adoption and make users' life easier, this commit adds a simple text documentation which fully describes all QMP supported commands. This is not ideal for a number of reasons (harder to maintain, text-only, etc) but does improve the current situation. To avoid at least divering from the user monitor help and texi snippets, QMP bits are also maintained inside qemu-monitor.hx, and hxtool is extended to generate a single text file from them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-19QMP: Add "Downstream extension of QMP" to specMarkus Armbruster1-0/+55
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2010-05-03QMP: Introduce RESUME eventLuiz Capitulino1-0/+12
It's emitted when the Virtual Machine resumes execution. We currently have the STOP event but don't have the matching RESUME one, this means that clients are notified when the VM is stopped but don't get anything when it resumes. Let's fix that as it's already causing some trouble to libvirt. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 21:59:13 +0000