summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02Use $(MAKE) for recursive makeEd Maste1-3/+3
On BSDs "make" is typically BSD make, while "gmake" is GNU make. Signed-off-by: Ed Maste <emaste@freebsd.org> Message-Id: <1427911118-21905-1-git-send-email-emaste@freebsd.org> [Fix $(INSTALLER) too as reported by Fam Zheng. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-18build: pass .d file name to scripts/make_device_config.sh, fix makefile targetPaolo Bonzini1-1/+2
The .d file name must match exactly what is used in the SUBDIR_DEVICES_MAK_DEP variable. Instead of making assumptions in the make_device_config.sh script, just pass it in. Similarly, the makefile target may not match the output file name, because Makefile uses a temporary file. Instead of making assumptions on what the Makefile does, emit the config-devices.mak file to stdout, and use the passed-in destination as the makefile target Reported-by: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10kvm_stat: add kvm_stat.1 man pageStefan Hajnoczi1-0/+9
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Ademar Reis <areis@redhat.com> Reviewed-by: Wei Huang <wei@redhat.com> Message-Id: <1425338947-10296-3-git-send-email-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27Makefile: don't silence mak file test with V=1Michael S. Tsirkin1-3/+3
V=1 should show what's going on, it's not nice to silence things unconditionally. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1424332114-13440-1-git-send-email-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27Makefile: fix up parallel building under MSYS+MinGWVasily Efimov1-2/+2
This patch enables parallel building of QEMU in MSYS+MinGW environment. Currently an attempt to build QEMU in parallel fails on generation of version.lo (and version.o too). The cause of the failure is that when listing prerequisites "Makefile" references "config-host.h" by absolute path in some rules and by relative path in others. Make cannot figure out that these references points to the same file which leads to the race: the generation of "version.*" which requires "$(BUILD_DIR)/config-host.h" is launched in parallel with the generation of "config-host.h" needed by other "Makefile" targets. This patch removes "$(BUILD_DIR)/" prefix from corresponding prerequisite of "version.*". There is no other prerequisites "$(BUILD_DIR)/config-host.h" found. Also note that not every version of MSYS is able to build QEMU in parallel, see: "http://sourceforge.net/p/mingw/bugs/1950/". The suggested version is 1.0.17. Signed-off-by: Vasily Efimov <real@ispras.ru> Message-Id: <1424264377-5992-1-git-send-email-real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-15Makefile: Remove config.status and common.env during 'make distclean'Thomas Huth1-2/+2
config.status and tests/qemu-iotests/common.env are generated files that should be deleted during 'make distclean'. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-26trace: install trace-events fileStefan Hajnoczi1-0/+1
Install the ./trace-events file into the data directory. This file contains the list of trace events that were built into QEMU at compile-time. The file is a handy reference for the set of trace events that the QEMU binary was built with. It is also needed by the simpletrace.py tool that parses binary trace data either emitted from QEMU when built with --enable-trace-backend=simple or by the SystemTap simpletrace script that QEMU provides. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1411486175-3017-1-git-send-email-stefanha@redhat.com
2014-08-15Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+6
into staging Tracing pull request * remotes/stefanha/tags/tracing-pull-request: virtio-rng: add some trace events trace: add some tcg tracing support trace: teach lttng backend to use format strings trace: [tcg] Include TCG-tracing header on all targets trace: [tcg] Include event definitions in "trace.h" trace: [tcg] Generate TCG tracing routines trace: [tcg] Include TCG-tracing helpers trace: [tcg] Define TCG tracing helper routine wrappers trace: [tcg] Define TCG tracing helper routines trace: [tcg] Declare TCG tracing helper routines trace: [tcg] Add 'tcg' event property trace: [tcg] Argument type transformation machinery trace: [tcg] Argument type transformation rules trace: [tcg] Add documentation trace: install simpletrace SystemTap tapset simpletrace: add simpletrace.py --no-header option trace: add tracetool simpletrace_stap format trace: extract stap_escape() function for reuse Conflicts: Makefile.objs
2014-08-12trace: [tcg] Generate TCG tracing routinesLluís Vilanova1-0/+2
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for tracing events in guest code: * trace_${event}_tcg Convenience wrapper that calls the translation-time tracer 'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to generate the TCG code to later trace the event at execution time. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Define TCG tracing helper routine wrappersLluís Vilanova1-0/+1
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG helper wrappers. These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native and TCG argument types to TCG types and call the actual TCG helpers ('gen_helper_trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Define TCG tracing helper routinesLluís Vilanova1-0/+1
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace events in guest code at execution time. The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native argument types to their original types (as defined in "trace-events") and call the tracing routine ('trace_${event}_exec'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Declare TCG tracing helper routinesLluís Vilanova1-0/+2
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace events in guest code at execution time ('trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-09build-sys: Move qapi-{types, visit, event}.o into util-obj-yFam Zheng1-1/+1
These three objects are repeated in multiple times in Makefiles. Let's just add them to libqemuutil.a, and don't list explicitly elsewhere. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-08PPC: e500: Actually install u-boot.e500Cole Robinson1-1/+2
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27qapi: move event definesWenchao Xia1-1/+1
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-24build-sys: introduce install-prog macro to install&strip binaries and use itMichael Tokarev1-10/+2
Use common rule (macro) to install and strip binaries, and use it in all places where we install binaries, instead of fixing bugs like 1319493 in every place. (This fixes https://bugs.launchpad.net/bugs/1319493) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-23qapi: add new schema file qapi-event.jsonWenchao Xia1-1/+2
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi script: add event supportWenchao Xia1-3/+8
qapi-event.py will parse the schema and generate qapi-event.c, then the API in qapi-event.c can be used to handle events in qemu code. All API have prefix "qapi_event". The script mainly includes two parts: generate API for each event define, generate an enum type for all defined events. Since in some cases the real emit behavior may change, for example, qemu-img would not send a event, a callback layer is used to control the behavior. As a result, the stubs at compile time can be saved, the binding of block layer code and monitor code will become looser. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi: Add includes from qapi/ as dependenciesMax Reitz1-3/+6
qapi-schema.json has been split into three smaller JSON files in qapi/. Add them as dependencies for the code generation in the Makefile, so changes to them will result in a rebuilt of all QAPI-dependent code. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-09trace: Multi-backend tracingLluís Vilanova1-2/+2
Adds support to compile QEMU with multiple tracing backends at the same time. For example, you can compile QEMU with: $ ./configure --enable-trace-backends=ftrace,dtrace Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system. This patch allows having both available without recompiling QEMU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-13Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell1-10/+12
* remotes/bonzini/configure: libcacard: remove libcacard-specific CFLAGS and LIBS from global vars build: simplify and fix fix-obj-vars build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax build: add support for per-object -cflags and -libs to all rules Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG) Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL) Makefile: strip tools and modules too build: simplify Makefile.target around unnest-vars invocations build: simplify Makefile.target a bit, use just one rule for softmmu build: Fix per-object variables for Makefile.target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-08qapi: Use an explicit input fileLluís Vilanova1-6/+6
Use an explicit input file on the command-line instead of reading from standard input. It also outputs the proper file name when there's an error. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08qapi: [trivial] Break long command linesLluís Vilanova1-6/+18
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08build: convert some obj-specific CFLAGS to use new foo.o-cflags syntaxMichael Tokarev1-6/+0
Current Makefile system allows using foo.o-cflags variables to store object-specific CFLAGS. Convert some usages of old syntax (using QEMU_CFLAGS += construct) to the new syntax. Do not touch multifile modules for now, as build system isn't ready for this. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)Michael Tokarev1-1/+1
We have $(INSTALL_LIB) which is the same as $(INSTALL_PROG) but uses correct permissions. Loadable objects (modules) are like shared libraries, not like programs. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Fam Zheng <famz@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08Makefile: strip tools and modules tooMichael Tokarev1-4/+12
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some places (for example, Makefile.target), but not all of them. There are a few places remain in main Makefile which still uses $(STRIP_OPT). Replace these places with $(STRIP) too. While at it, simplify variable pattern substitution of the surrounding places, change $(patsubst pat,rep,$(var)) into $(var:pat=rep) which is much easier to read (this is probably a good idea to do everywhere). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Fam Zheng <famz@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-07Makefile: add qga-vss-dll-obj-y to nested variablesTomoki Sekiyama1-0/+1
The build rule for qga/vss-win32/qga-vss.dll is broken by commit ba1183da9a10b94611cad88c44a5c6df005f9b55, because it misses qga-vss-dll-obj-y in the list of nested variables. This fixes build of qga-vss.dll by adding qga-vss-dll-obj-y to the list. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-04-07Makefile: remove bashismMichael Tokarev1-1/+1
When installing modules (when --enable-modules is specified for ./configure), Makefile uses the following construct to replace all slashes with dashes in module name: ${s//\//-} This is a bash-specific substitution mechanism. POSIX does not have it, and some operating systems (for example Debian) does not implement this construct in default shell (for example dash). Use more traditional way to perform the substitution: use `tr' tool. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1396707946-21351-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-17Makefile: Fix "make clean"Fam Zheng1-4/+1
This fixes a dangerous bug: "make clean" after "make distclean" will delete every single file including those under .git, if you do in-tree build! Rationale: A first "make distclean" will unset $(DSOSUF), a following "make distclean" or "make clean" will find all the files and delete it. Fix it by explicitly typing the file extensions here, and combine multiple find invocations into one. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1395020122-4957-1-git-send-email-famz@redhat.com Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-08build: Fix installation of target-dependent filesLluís Vilanova1-1/+1
Pass all the relevant sub-directory make variables. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es
2014-03-04Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into stagingPeter Maydell1-1/+1
* remotes/mcayland/qemu-sparc: sun4m: Add Sun CG3 framebuffer initialisation function sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM sun4m: fix slavio timer RUN/STOP bit sun4m: Set HostID in NVRAM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Makefile: Add missing dependency for system emulation (fix build)Stefan Weil1-0/+1
Comment from Makefile.objs: The system emulation needs this dependency (which was missing in Makefile), otherwise builds without tools (or massive parallel builds) fail. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-27sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROMMark Cave-Ayland1-1/+1
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating systems such as early Solaris that do not have drivers for TCX. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-24Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell1-1/+28
* remotes/bonzini/configure: build: softmmu targets do not have a "main.o" file configure: Disable libtool if -fPIE does not work with it (bug #1257099) block: convert block drivers linked with libs to modules Makefile: introduce common-obj-m and block-obj-m for DSO Makefile: install modules with "make install" module: implement module loading rules.mak: introduce DSO rules darwin: do not use -mdynamic-no-pic block: use per-object cflags and libs rules.mak: allow per object cflags and libs rules.mak: fix $(obj) to a real relative path util: Split out exec_dir from os_find_datadir Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20Makefile: introduce common-obj-m and block-obj-m for DSOFam Zheng1-1/+3
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does for $(block-obj-y). Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20Makefile: install modules with "make install"Fam Zheng1-0/+6
Install all the modules to ${MODDIR}. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20module: implement module loadingFam Zheng1-0/+3
This patch adds loading, stamp checking and initialization of modules. The init function of dynamic module is no longer directly called as __attribute__((constructor)) in static linked version, it is called only after passed the checking of presense of stamp symbol: qemu_stamp_$RELEASEHASH where $RELEASEHASH is generated by hashing version strings and content of configure script. With this, modules built from a different tree/version/configure will not be loaded. The module loading code requires gmodule-2.0. Modules are searched under - CONFIG_MODDIR - executable folder (to allow running qemu-{img,io} in the build directory) - ../ of executable folder (to allow running system emulator in the build directory) Modules are linked under their subdir respectively, then copied to top level of build directory for above convinience, e.g.: $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: introduce DSO rulesFam Zheng1-1/+3
Add necessary rules and flags for shared object generation. The new rules introduced here are: 1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so. 2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern matching in Makefile. It's linked to "-shared" with all its dependencies (multiple *.o) as input. Which means the list of depended objects must be specified in each sub-Makefile.objs: foo.mo-objs := bar.o baz.o qux.o in the same style with foo.o-cflags and foo.o-libs. The objects here will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs. 3) For all files ending up in %.so, the following is added automatically: foo.o-cflags += -fPIC -DBUILD_DSO Also introduce --enable-modules in configure, the option will enable support of shared object build. Otherwise objects are static linked to executables. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: fix $(obj) to a real relative pathFam Zheng1-0/+14
Makefile.target includes rule.mak and unnested common-obj-y, then prefix them with '../', this will ignore object specific QEMU_CFLAGS in subdir Makefile.objs: $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS) Because $(obj) here is './block', instead of '../block'. This doesn't hurt compiling because we basically build all .o from top Makefile, before entering Makefile.target, but it will affact arriving per-object libs support. The starting point of $(obj) is passed in as argument of unnest-vars, as well as nested variables, so that different Makefiles can pass in a right value. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-19Adapt Makefiles to the new LTTng ust interfaceMohamad Gebai1-0/+5
Add generation of new files for LTTng ust. Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-15Add bios-256k.bin to BLOBS on MakefileEduardo Habkost1-1/+1
The default machine-type (pc-i440fx-2.0) now requires bios-256k.bin, but "make install" isn't installing it, so qemu-system-x86_64 won't run out of the box. Add it to BLOBS so it gets installed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: William Dauchy <william@gandi.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-21sun4m: Add FCode ROM for TCX framebufferMark Cave-Ayland1-1/+1
Upstream OpenBIOS now implements SBus probing in order to determine the contents of a physical bus slot, which is required to allow OpenBIOS to identify the framebuffer without help from the fw_cfg interface. SBus probing works by detecting the presence of an FCode program (effectively tokenised Forth) at the base address of each slot, and if present executes it so that it creates its own device node in the OpenBIOS device tree. The FCode ROM is generated as part of the OpenBIOS build and should generally be updated at the same time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-19Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-1/+1
# By Jan Krupa (4) and others # Via Michael Tokarev * mjt/trivial-patches: hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently configure: Use -B switch only for Python versions which support it qga: Fix shutdown command of guest agent to work with SysV console: Remove unused debug code qga: Fix compilation for old versions of MinGW .travis.yml: basic compile and check recipes pci-assign: Fix error_report of pci-stub message qapi: Fix comment for create-type to match code. vl: fix build when configured with no graphic support usb: drop unused USBNetState.inpkt field qemu-char: add missing characters used in keymaps qemu-char: add support for U-prefixed symbols qemu-char: add Czech keymap file qemu-char: add Czech characters to VNC keysyms Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-13qemu-char: add Czech keymap fileJan Krupa1-1/+1
This patch adds Czech keyboard layout to available keymap files and Makefile. Signed-off-by: Jan Krupa <jkrupa@suse.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-07configure: Add config.status to recreate the current configurationStefan Weil1-1/+8
The latest configure invocation was saved in config-host.mak and could be extracted from that file to recreate the configuration. Now it is saved in a new file config.status which can be directly executed to recreate the configuration. The file name and the comments were copied from GNU autoconf. Makefile now uses config.status, but also includes transitional code for the old mechanism. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Fam Zheng <famz@redhat.com>
2013-10-11build: add command check-cleanWenchao Xia1-1/+0
This command will package the clean operations in tests. Now root Makefile simply calls the command and do not care the details of it any more. Original the built binaries for test will not be removed, now they will be deleted in clean operation. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-23Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-1/+3
# By Stefan Weil (8) and others # Via Michael Tokarev * mjt/trivial-patches: tests/.gitignore: ignore test-throttle exec: Fix broken build for MinGW (regression) kvm: Fix compiler warning (clang) tcg-sparc: Fix parenthesis warning Makefile: Remove some more files when cleaning target-i386: Fix segment cache dump iov: avoid "orig_len may be used unitialized" warning vscclient: remove unnecessary use of uninitialized variable trace-events: Clean up with scripts/cleanup-trace-events.pl again tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) *-user: Improve documentation for lock_user function MAINTAINERS: Add missing entry to filelist for TCI target translate-all: Fix formatting of dump output *-user: Fix typo in comment (ulocking -> unlocking) docs: Fix IO port number for CPU present bitmap. q35: Fix typo in constant DEFUALT -> DEFAULT. configure: Undefine _FORTIFY_SOURCE prior using it Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-20Makefile: Remove some more files when cleaningStefan Weil1-1/+3
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-18QMP: fix qmp-commands.txt generation pathLuiz Capitulino1-3/+3
This file should be generated in the BUILD_DIR, as all other docs. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-09-09qemu-ga: Add Windows VSS provider and requester as DLLTomoki Sekiyama1-1/+1
Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 16:13:56 +0000