summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-10-05pci: hotplug windupGerd Hoffmann2-2/+25
Create qdev infrastructure for pci hotplug. PCI bus implementations must register a handler for hotplug. Creating a new PCI device will automagically hot-plug it in case the PCI bus in question supports this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05scsi: hotplug windupGerd Hoffmann2-0/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hotplug windupGerd Hoffmann1-0/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev hotplug: infrastructure and monitor commands.Gerd Hoffmann4-4/+109
Adds device_add and device_del commands. device_add accepts accepts the same syntax like the -device command line switch. device_del expects a device id. So you should tag your devices with ids if you want to remove them later on, like this: device_add pci-ohci,id=ohci device_del ohci Unplugging via pci_del or usb_del works too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch qemu-config to qemu_errorGerd Hoffmann1-4/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann8-15/+56
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann8-11/+13
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: use qdev for device destruction.Gerd Hoffmann3-5/+4
pci_unregister_device is static now and hooked into Devicestate->exit. qdev_free(pci_device) works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Implement scsi device destructionGerd Hoffmann3-11/+21
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Add exit callback to DeviceInfo.Gerd Hoffmann2-0/+4
This adds a exit callback for device destruction to DeviceInfo, so we can hook cleanups into qdev device destruction. Followup patches will put that into use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: device free fixups.Gerd Hoffmann2-4/+38
Two bug fixes: * When freeing a device we unregister even stuff we didn't register in the first place because the ->init() callback failed. * When freeing a device with child busses attached, we fail to zap the child bus (and the devices attached to it). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05parallel: convert isa to qdevGerd Hoffmann5-14/+57
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05update pc-bios/bios.binGerd Hoffmann1-0/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05update pcbios submodule to current masterGerd Hoffmann1-0/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05piix_pci: kill PIIX3IrqStateGerd Hoffmann1-20/+17
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05convert pci bridge to qdevGerd Hoffmann1-18/+48
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05support inplace allocation for pci bus, split irq init.Gerd Hoffmann2-10/+38
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch ide bus to inplace allocation.Gerd Hoffmann4-39/+36
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch usb bus to inplace allocation.Gerd Hoffmann5-15/+12
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann5-22/+19
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05allow qdev busses allocations be inplaceGerd Hoffmann2-3/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05temporary fix for on_vcpuGlauber Costa1-0/+4
Recent changes made on_vcpu hit the abort() path, even with the IO thread disabled. This is because cpu_single_env is no longer set when we call this function. Although the correct fix is a little bit more complicated that that, the recent thread in which I proposed qemu_queue_work (which fixes that, btw), is likely to go on a quite different direction. So for the benefit of those using guest debugging, I'm proposing this simple fix in the interim. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05kvm: Fix guest single-steppingJan Kiszka1-1/+7
Hopefully the last regression of 4c0960c0: KVM_SET_GUEST_DEBUG requires properly synchronized guest registers (on x86: eflags) on entry. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05gdbstub: x86: Switch 64/32 bit registers dynamicallyJan Kiszka2-15/+47
Commit 56aebc891674cd2d07b3f64183415697be200084 changed gdbstub in way that debugging 32 or 16-bit guest code is no longer possible with qemu for x86_64 guest CPUs. Since that commit, qemu only provides registers sets for 64-bit, forcing current and foreseeable gdb to also switch its architecture to 64-bit. And this breaks if the inferior is 32 or 16 bit. No question, this is a gdb issue. But, as it was confirmed in several discusssions with gdb people, it is a non-trivial thing to fix. So until qemu finds a gdb version attach with a rework x86 support, we have to work around it by switching the register layout as the guest switches its execution mode between 16/32 and 64 bit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Enable host-clock-based RTCJan Kiszka5-25/+49
Switch RTC emulations to the new host_clock instead of vm_clock by default. This has the advantage that the emulated RTC will follow automatically the host time while it might be tuned via NTP. vm_clock can still be selected by passing '-rtc clock=vm' on the command line. Note that some RTC emulations (at least M48T59) already use the host time unconditionally while others (namely MC146818) do not. This patch introduces the required infrastructure for selecting the base clock but only converts MC146818 for now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Refactor RTC command line switchesJan Kiszka4-57/+119
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new unified command line switch: -rtc [base=utc|localtime|date][,driftfix=none|slew] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Introduce QEMU_CLOCK_HOSTJan Kiszka2-11/+42
Despite its name QEMU_CLOCK_REALTIME is (normally) not using CLOCK_REALTIME / the host system time as base. In order to allow also non-trivial RTC emulations (MC146818) to follow the host time instead of the virtual guest time, introduce the new clock type QEMU_CLOCK_HOST. It is unconditionally based on CLOCK_REALTIME, thus will follow system time changes of the host. The only limitation of its current implementation is that pending host_clock timers may not fire early if the host time is pushed forward beyond their expiry. So far no urgent need to overcome this limitation was identified, so it's left as simple as it is (expiry on next alarm timer tick). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05win32: Drop dead dyntick timer codeJan Kiszka1-5/+1
nearest_delta_us is calculated but not used. Drop it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Rename QEMU_TIMER_* to QEMU_CLOCK_*Jan Kiszka1-21/+21
These constants select clocks, not timers. And init_timers initializes clocks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix exit on 'pci_add' Monitor commandLuiz Capitulino3-0/+16
If the user issues one of the following commands to the Monitor: pci_add pci_addr=auto nic model=None pci_add pci_addr=auto nic model=? QEMU will exit, because the function used to perform sanity checks (qemu_check_nic_model_list()) exits on error. This function is used by the startup code, where it makes sense to exit on error, but in the Monitor it doesn't. Changing qemu_check_nic_model_list() to not exit on error is not possible though, as it's used by the board init code (the PC one), where all board specific code must have void return. The way I've chosen to fix this was to introduce a new function called pci_nic_supported(), which checks if the NIC is supported and returns true or false accordingly. The new function is used only by the Monitor, it performs the necessary check and returns an error in case the NIC is not supported, thus qemu_check_nic_model_list()'s exit is never trigged. The following should be observed: 1. Only the specified NIC is checked, the default one is assumed to be supported 2. The NIC query command (model=?) won't work with pci_add, the right way to do this with the Monitor is to add a new command Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Correctly free nd structureGlauber Costa1-2/+7
When we "free" a NICInfo structure, we can leak pointers, since we don't do much more than setting used = 0. We free() the model parameter, but we don't set it to NULL. This means that a new user of this structure will see garbage in there. It was not noticed before because reusing a NICInfo is not that common, but it can be, for users of device pci hotplug. A user hit it, described at https://bugzilla.redhat.com/show_bug.cgi?id=524022 This patch memset's the whole structure, guaranteeing that anyone reusing it will see a fresh NICinfo. Also, we free some other strings that are currently leaking. This codebase is quite old, so this patch should feed all stable trees. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05do proper cpu_self checkGlauber Costa1-2/+7
Currently, our check for qemu_cpu_self only checks if there is a cpu currently in execution (represented by cpu_single_env being set). While this might be okay for tcg, it is certainly not okay for kvm, since multiple cpus might be executing. Instead, I propose we use pthread primitives to test if the caller thread is the same as env->thread. For tcg, it will have the same semantics as before, since all CPUStates will point to the same thread, and we'll only have one in execution at a time. Signed-off-by: Glauber Costa <glommer@mothafucka.localdomain> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05bdf: Remove last users of FALSE/TRUEJuan Quintela4-44/+40
This brings bfd_boolean to the wonderful world of <stdbool.h>, it is needed because it defines bdf_boolean as an enum with values true and false, and some architectures use TRUE, FALSE and give problems when you try to use <stdbool.h> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Add -Wold-style-* flagsJuan Quintela1-0/+10
This time, I add them in configure only if target compiler supports it Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05slirp: It needs to use QEMU_CFLAGS not CFLAGSJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Add VMState supportJan Kiszka2-29/+192
Register all relevant fields of Musicpal device states with the VMState framework. This involves a few type changes of state variables. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Make PIT emulation more robustJan Kiszka1-6/+28
Stop the periodic timers of the PIT on reset, disabling via the control register and invalid parameters. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: True reset support for audio deviceJan Kiszka1-2/+4
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: True reset support for GPIOJan Kiszka1-3/+14
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Coding style fixesJan Kiszka2-41/+59
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Clean up typecastsJan Kiszka1-5/+5
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Rework GPIO input eventsJan Kiszka1-75/+75
The qdev_gpio conversion of 343ec8e caused come polarity mismatch of key event pins and left an overly complex solution behind. Take this chance and refactor the GPIO input system of the Musicpal, moving it closer to reality: - Instantiate all 32 GPIO input pins and do the routing only via qdev_connect_gpio_out. - Implement IMR and IER registers. They manage the GPIO pin IRQ. IMR seems to enable IRQs on rising edges, IER on falling ones. At least this matches what the Musicpal fireware require. - Move key pin logic inversion from the GPIO layer to musicpal_key. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05musicpal: Catch null TX qeueuesJan Kiszka1-1/+3
They likely represent invalid queues that should be skipped. We already do this for RX queues. Wish I had a spec... Credits go to malc for analyzing the issue and suggesting this fix. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: port cpu to vmstateJuan Quintela1-259/+240
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05vmstate: Add suppot for field_exist() testJuan Quintela2-17/+49
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: factor out cpu_get/put_fpreg()Juan Quintela1-72/+137
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: factor out cpu_get/put_mttr_var()Juan Quintela1-4/+24
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: factor out cpu_get/put_xmm_reg()Juan Quintela1-4/+24
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: factor out cpu_pre/post_load()Juan Quintela1-18/+39
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05x86: factor out cpu_pre_save()Juan Quintela1-21/+32
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 02:12:48 +0000