summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-06-07correct RTC_CHANGE_EVENT description (v2)Marcelo Tosatti1-1/+2
Fix RTC_CHANGE event description to match implementation. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-07MAINTAINERS: split Monitor (QMP/HMP) entryLuiz Capitulino1-2/+17
This entry doesn't reflect reality for a few years now. This commit splits it into Human Monitor (HMP), QAPI and QMP. Markus is dropped as a maintainer. This is what we have been for the last few years. Also, it's going to help me to offload some of this work to someone else in the near future. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2013-06-07MAINTAINERS: new maintainers for qapi-schema.jsonLuiz Capitulino1-0/+7
I'm facing two problems lately wrt QMP patch review: increasingly lack of bandwidth and lack of background in so many different areas that are getting new QMP commands almost every week. In order to help me mitigate this problem, I'm adding Eric and Markus (besides me) as maintainers of the qapi-schema.json file. Markus has been an old timer reviewer. Eric is being the most active and prolific reviewer of QMP patches for some time now. I believe Markus and Eric will keep doing their work as before, but starting now I'll require the ACK of at least one of them before appling a patch/series that touches the qapi-schema.json file. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2013-06-07Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori25-2561/+2715
# By Kevin Wolf (19) and others # Via Stefan Hajnoczi * stefanha/block: (26 commits) hmp: add parameters device and -v for info block hmp: show ImageInfo in 'info block' qmp: add ImageInfo in BlockDeviceInfo used by query-block block: add image info query function bdrv_query_image_info() block: add snapshot info query function bdrv_query_snapshot_info_list() ide-test: Add FLUSH CACHE test case ide: Set BSY bit during FLUSH ide-test: Add enum value for DEV blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK events Make qemu-io commands available in HMP qemu-io: Use the qemu version for -V qemu-io: Interface cleanup qemu-io: Move remaining helpers from cmd.c qemu-io: Move command_loop() and friends qemu-io: Move functions for registering and running commands qemu-io: Move qemu_strsep() to cutils.c qemu-io: Move 'quit' function qemu-io: Move 'help' function qemu-io: Factor out qemuio_command qemu-io: Split off commands to qemu-io-cmds.c ... Message-id: 1370606325-10680-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-07Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into stagingAnthony Liguori2-5/+5
# By Cornelia Huck # Via Cornelia Huck * cohuck/virtio-ccw-upstr: virtio-ccw: Fix unsetting of indicators. s390x/css: Fix concurrent sense. Message-id: 1370592676-22532-1-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-07hmp: add parameters device and -v for info blockWenchao Xia2-12/+20
With these parameters, user can choose the information to be showed, to avoid message flood in the monitor. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07hmp: show ImageInfo in 'info block'Wenchao Xia1-0/+14
Now human monitor can show image details, include internal snapshot and backing chain info for every block device. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07qmp: add ImageInfo in BlockDeviceInfo used by query-blockWenchao Xia4-8/+125
Now image info will be retrieved as an embbed json object inside BlockDeviceInfo, backing chain info and all related internal snapshot info can be got in the enhanced recursive structure of ImageInfo. New recursive member *backing-image is added to reflect the backing chain status. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add image info query function bdrv_query_image_info()Wenchao Xia3-14/+46
This patch adds function bdrv_query_image_info(), which will retrieve image info in qmp object format. The implementation is based on the code moved from qemu-img.c, but uses block layer function to get snapshot info. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-07block: add snapshot info query function bdrv_query_snapshot_info_list()Wenchao Xia3-15/+49
This patch adds function bdrv_query_snapshot_info_list(), which will retrieve snapshot info of an image in qmp object format. The implementation is based on the code moved from qemu-img.c with modification to fit more for qmp based block layer API. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06ide-test: Add FLUSH CACHE test caseKevin Wolf1-0/+40
This checks in particular that BSY is set while the flush request is in flight. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06ide: Set BSY bit during FLUSHAndreas Färber1-0/+1
The implementation of the ATA FLUSH command invokes a flush at the block layer, which may on raw files on POSIX entail a synchronous fdatasync(). This may in some cases take so long that the SLES 11 SP1 guest driver reports I/O errors and filesystems get corrupted or remounted read-only. Avoid this by setting BUSY_STAT, so that the guest is made aware we are in the middle of an operation and no ATA commands are attempted to be processed concurrently. Addresses BNC#637297. Suggested-by: Gonglei (Arei) <arei.gonglei@huawei.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06ide-test: Add enum value for DEVKevin Wolf1-1/+2
Get rid of the magic number. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06blkdebug: Add BLKDBG_FLUSH_TO_OS/DISK eventsKevin Wolf3-4/+10
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06Make qemu-io commands available in HMPKevin Wolf5-1/+37
It was decided to not make this command available in QMP in order to make clear that this is not supposed to be a stable API and should be used only for testing and debugging purposes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Use the qemu version for -VKevin Wolf1-3/+1
Always printing 0.0.1 and never updating the version number wasn't very useful. qemu-io is released with qemu, so using the same version number makes most sense. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Interface cleanupKevin Wolf3-30/+27
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move remaining helpers from cmd.cKevin Wolf4-154/+105
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move command_loop() and friendsKevin Wolf3-148/+139
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move functions for registering and running commandsKevin Wolf4-178/+148
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move qemu_strsep() to cutils.cKevin Wolf3-21/+22
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move 'quit' functionKevin Wolf3-32/+16
This one only makes sense in the context of the qemu-io tool, so move it to qemu-io.c. Adapt coding style and register it like other commands. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move 'help' functionKevin Wolf3-81/+66
No reason to treat it different from other commands. Move it to qemu-io-cmds.c, adapt the coding style and register it like any other command. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Factor out qemuio_commandKevin Wolf3-39/+31
It's duplicated code. Move it to qemu-io-cmds.c because it's not dependent on any static data of the qemu-io tool. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Split off commands to qemu-io-cmds.cKevin Wolf3-1816/+1838
This is the implementation of all qemu-io commands that make sense to be called from the qemu monitor, i.e. everything except open, close and quit. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Don't use global bs in command implementationsKevin Wolf3-80/+101
Pass in the BlockDriverState to the command handlers instead of using the global variable. This is an important step to make the commands usable outside of qemu-io. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Handle cvtnum() errors in 'alloc'Kevin Wolf1-1/+8
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Make cvtnum() a wrapper around strtosz_suffix()Kevin Wolf3-38/+6
No reason to implement the same thing multiple times. A nice side effect is that fractional numbers like 0.5M can be used in qemu-io now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06cutils: Support 'P' and 'E' suffixes in strtosz()Kevin Wolf5-12/+20
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Remove unused args_commandKevin Wolf3-38/+2
The original intention seems to be something with handling multiple images at once, but this has never been implemented and the only function ever registered is implemented to make everything behave like a "global" command. Just do that unconditionally now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06virtio-ccw: Fix unsetting of indicators.Cornelia Huck1-4/+4
Interpretation of the ccws to register (configuration) indicators contained a thinko: We want to disallow reading from 0, but setting the indicator pointer to 0 is fine. Let's fix the handling for CCW_CMD_SET{,_CONF}_IND. Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-06s390x/css: Fix concurrent sense.Cornelia Huck1-1/+1
Fix an off-by-one error when indicating availablity of concurrent sense data. Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-05blockdev: reset werror/rerror on drive_delStefan Hajnoczi2-0/+6
Paolo Bonzini <pbonzini@redhat.com> suggested the following test case: 1. Launch a guest and wait at the GRUB boot menu: qemu-system-x86_64 -enable-kvm -m 1024 \ -drive if=none,cache=none,file=test.img,id=foo,werror=stop,rerror=stop -device virtio-blk-pci,drive=foo,id=virtio0,addr=4 2. Hot unplug the device: (qemu) drive_del foo 3. Select the first boot menu entry Without this patch the guest pauses due to ENOMEDIUM. The guest is stuck in a continuous pause loop since the I/O request is retried and fails immediately again when the guest is resumed. With this patch the error is reported to the guest. Note that this scenario actually happens sometimes during libvirt disk hot unplug, where device_del is followed by drive_del. I/O may still be submitted to the drive after drive_del if the guest does not process the PCI hot unplug notification. Reported-by: Dafna Ron <dron@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04Merge remote-tracking branch 'sstabellini/xen_fixes_20130603' into stagingAnthony Liguori6-57/+15
* sstabellini/xen_fixes_20130603: xen: use pc_init_pci instead of pc_init_pci_no_kvmclock xen: remove xen_vcpu_init xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional) xen_machine_pv: do not create a dummy CPU in machine->init main_loop: do not set nonblocking if xen_enabled() xen: simplify xen_enabled Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-04Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori18-731/+843
# By Stefan Hajnoczi (6) and others # Via Kevin Wolf * kwolf/for-anthony: block: dump snapshot and image info to specified output block: move qmp and info dump related code to block/qapi.c block: move snapshot code in block.c to block/snapshot.c block: drop bs_snapshots global variable qemu-iotests: make create_image() common qemu-iotests: make compare_images() common qemu-iotests: make cancel_and_wait() common qemu-iotests: make assert_no_active_block_jobs() common block: add block driver read only whitelist qemu-iotests: fix 054 cluster size help output Message-id: 1370349940-4703-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-04Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori22-62/+78
pci: misc cleanups This includes some pci-related cleanups, and fw cfg cleanups which will be useful for on-going pci related work. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 02 Jun 2013 02:46:52 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (8) and Laszlo Ersek (1) # Via Michael S. Tsirkin * mst/tags/for_anthony: pvpanic: use FWCfgState explicitly fw_cfg: fw_cfg is a singleton fw_cfg: add API to find FW cfg object fw_cfg: move typedef to qemu/typedefs.h refer to FWCfgState explicitly apic: rename apic specific bitopts firmware_abi: move to include/hw/nvram/ dec.c - move to pci-bridge q35: set fw_name Message-id: 1370202787-3712-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-04block: dump snapshot and image info to specified outputWenchao Xia4-39/+49
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now, some internal buffers are still used for format control, which have no chance to be truncated. As a result, these two functions have no more issue of truncation, and they can be used by both qemu and qemu-img with correct parameter specified. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move qmp and info dump related code to block/qapi.cWenchao Xia8-347/+408
This patch is a pure code move patch, except following modification: 1 get_human_readable_size() is changed to static function. 2 dump_human_image_info() is renamed to bdrv_image_info_dump(). 3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs) instead of direct traverse of global array 'bdrv_states'. 4 collect_snapshots() and collect_image_info() are renamed, unused parameter *fmt in collect_image_info() is removed. 5 code style fix. To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H instead of QAPI_H. Now block.h and snapshot.h are at the same level in include path, block_int.h and qapi.h will both include them. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move snapshot code in block.c to block/snapshot.cWenchao Xia6-143/+217
All snapshot related code, except bdrv_snapshot_dump() and bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump() will be moved to another file later. bdrv_is_snapshot() is not related with internal snapshot. It also fixes small code style errors reported by check script. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: drop bs_snapshots global variableStefan Hajnoczi3-33/+15
The bs_snapshots global variable points to the BlockDriverState which will be used to save vmstate. This is really a savevm.c concept but was moved into block.c:bdrv_snapshots() when it became clear that hotplug could result in a dangling pointer. While auditing the block layer's global state I came upon bs_snapshots and realized that a variable is not necessary here. Simply find the first BlockDriverState capable of internal snapshots each time this is needed. The behavior of bdrv_snapshots() is preserved across hotplug because new drives are always appended to the bdrv_states list. This means that calling the new find_vmstate_bs() function is idempotent - it returns the same BlockDriverState unless it was hot-unplugged. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04qemu-iotests: make create_image() commonStefan Hajnoczi3-40/+27
Both 030 and 041 use create_image(). Move it to iotests.py. Also drop ImageStreamingTestCase since the class now has no methods. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04qemu-iotests: make compare_images() commonStefan Hajnoczi2-31/+15
The iotests.compare_images() function returns True if two image files have the identical data. Previously this was implemented by converting images to raw and then comparing their contents using Python. Since "qemu-img compare" is now available and is more efficient, switch to it. This function will be reused by the 'drive-backup' test case. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04qemu-iotests: make cancel_and_wait() commonStefan Hajnoczi3-53/+38
The cancel_and_wait() function has been duplicated in 030 and 041. Move it into iotests.py and let it return the event so tests can perform additional asserts. Note that 041's cancel_and_wait(wait_ready=True) is replaced by wait_ready_and_cancel(), which uses the new wait_ready() and cancel_and_wait() underneath. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04qemu-iotests: make assert_no_active_block_jobs() commonStefan Hajnoczi3-61/+57
Tests 030 and 041 both use query-block-jobs to check whether any block jobs are active. Make this code common so that 'drive-backup' and other new feature tests will be able to reuse it. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: add block driver read only whitelistFam Zheng6-28/+61
We may want to include a driver in the whitelist for read only tasks such as diagnosing or exporting guest data (with libguestfs as a good example). This patch introduces a readonly whitelist option, and for backward compatibility, the old configure option --block-drv-whitelist is now an alias to rw whitelist. Drivers in readonly list is only permitted to open file readonly, and returns -ENOTSUP for RW opening. E.g. To include vmdk readonly, and others read+write: ./configure --target-list=x86_64-softmmu \ --block-drv-rw-whitelist=qcow2,raw,file,qed \ --block-drv-ro-whitelist=vmdk Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04qemu-iotests: fix 054 cluster size help outputStefan Hajnoczi1-1/+1
Commit f3f4d2c09b9cf46903ba38425ec46c44185162bd added a hint to increase the cluster size when a large image cannot be created. Test 054 now has outdated output and fails because the golden output does not match. This patch updates the 054 golden output. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-03gtk: don't use g_object_unref on GdkCursorAnthony Liguori1-1/+1
It's not a GObject. Cc: Gerd Hoffman <kraxel@redhat.com> Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - Fix summary to agree with code (Peter)
2013-06-03gtk: don't resize window when enabling scalingAnthony Liguori1-1/+3
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-03fix double free the memslot in kvm_set_phys_memXiao Guangrong1-1/+2
Luiz Capitulino reported that guest refused to boot and qemu complained with: kvm_set_phys_mem: error unregistering overlapping slot: Invalid argument It is caused by commit 235e8982ad that did double free for the memslot so that the second one raises the -EINVAL error Fix it by reset memory size only if it is needed Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-03configure: Report unknown target names more helpfullyPeter Maydell1-0/+13
If the user specifies a target list themselves, check each entry to make sure it's a target we recognise. This allows us to print a helpful error message, rather than falling through (where we would probably eventually end up hitting the uninformative "ERROR: Unsupported target CPU"). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1369062976-301-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 19:04:26 +0000