summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-26Merge remote-tracking branch ↵Peter Maydell20-69/+359
'remotes/pmaydell/tags/pull-target-arm-20160226' into staging target-arm queue: * Clean up handling of bad mode switches writing to CPSR, and implement the ARMv8 requirement that they set PSTATE.IL * Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor register accesses * Don't implement stellaris-pl061-only registers on generic-pl061 * Fix SD card handling for raspi * Add missing include files to MAINTAINERS * Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW * Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF # gpg: Signature made Fri 26 Feb 2016 15:19:07 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20160226: target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW sdhci: add quirk property for card insert interrupt status on Raspberry Pi sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts" MAINTAINERS: Add some missing ARM related header files raspi: fix SD card with recent sdhci changes ARM: PL061: Checking register r/w accesses to reserved area target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps target-arm: Fix handling of SDCR for 32-bit code target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1 target-arm: Make mode switches from Hyp via CPS and MRS illegal target-arm: In v8, make illegal AArch32 mode changes set PSTATE.IL target-arm: Forbid mode switch to Mon from Secure EL1 target-arm: Add Hyp mode checks to bad_mode_switch() target-arm: Add comment about not implementing NSACR.RFR target-arm: In cpsr_write() ignore mode switches from User mode linux-user: Use restrictive mask when calling cpsr_write() target-arm: Raw CPSR writes should skip checks and bank switching target-arm: Add write_type argument to cpsr_write() target-arm: Give CPSR setting on 32-bit exception return its own helper Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26Merge remote-tracking branch ↵Peter Maydell6-65/+165
'remotes/amit-migration/tags/migration-for-2.6-5' into staging migration pull - fix a qcow2 assert - fix for older distros (CentOS 5) - documentation for vmstate flags - minor code rearrangement # gpg: Signature made Fri 26 Feb 2016 15:15:15 GMT using RSA key ID 854083B6 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" * remotes/amit-migration/tags/migration-for-2.6-5: migration (postcopy): move bdrv_invalidate_cache_all of of coroutine context migration (ordinary): move bdrv_invalidate_cache_all of of coroutine context migration/vmstate: document VMStateFlags MAINTAINERS: Add docs/migration.txt to the "Migration" section migration/postcopy-ram: Guard use of sys/eventfd.h with CONFIG_EVENTFD migration: reorder code to make it symmetric Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26migration (postcopy): move bdrv_invalidate_cache_all of of coroutine contextDenis V. Lunev1-10/+19
There is a possibility to hit an assert in qcow2_get_specific_info that s->qcow_version is undefined. This happens when VM in starting from suspended state, i.e. it processes incoming migration, and in the same time 'info block' is called. The problem is that qcow2_invalidate_cache() closes the image and memset()s BDRVQcowState in the middle. The patch moves processing of bdrv_invalidate_cache_all out of coroutine context for postcopy migration to avoid that. This function is called with the following stack: process_incoming_migration_co qemu_loadvm_state qemu_loadvm_state_main loadvm_process_command loadvm_postcopy_handle_run Signed-off-by: Denis V. Lunev <den@openvz.org> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1456304019-10507-3-git-send-email-den@openvz.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26migration (ordinary): move bdrv_invalidate_cache_all of of coroutine contextDenis V. Lunev2-40/+51
There is a possibility to hit an assert in qcow2_get_specific_info that s->qcow_version is undefined. This happens when VM in starting from suspended state, i.e. it processes incoming migration, and in the same time 'info block' is called. The problem is that qcow2_invalidate_cache() closes the image and memset()s BDRVQcowState in the middle. The patch moves processing of bdrv_invalidate_cache_all out of coroutine context for standard migration to avoid that. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Message-Id: <1456304019-10507-2-git-send-email-den@openvz.org> [Amit: Fix a use-after-free bug] Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEFPeter Maydell2-7/+122
The v8 ARM ARM defines that unused spaces in the ID_AA64* system register ranges are Reserved and must RAZ, rather than being UNDEF. Implement this. In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2, and newer versions of the Linux kernel will attempt to read this, which causes them not to boot up on versions of QEMU missing this fix. Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6 is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in the ARMCPU struct so CPUs can override it, though since none do this too will just RAZ. Cc: qemu-stable@nongnu.org Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org>
2016-02-26target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAWEdgar E. Iglesias1-1/+1
Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not having any underlying state. This fixes an issue with booting KVM enabled kernels when EL2 is on. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1456490739-19343-1-git-send-email-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: add quirk property for card insert interrupt status on Raspberry PiAndrew Baumann2-1/+39
This quirk is a workaround for the following hardware behaviour, on which UEFI (specifically, the bootloader for Windows on Pi2) depends: 1. at boot with an SD card present, the interrupt status/enable registers are initially zero 2. upon enabling it in the interrupt enable register, the card insert bit in the interrupt status register is immediately set 3. after a subsequent controller reset, the card insert interrupt does not fire, even if enabled in the interrupt enable register Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: Revert "add optional quirk property to disable card insertion/removal ↵Andrew Baumann2-7/+3
interrupts" This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d. This change was poorly tested on my part. It squelched card insertion interrupts on reset, but that was not necessary because sdhci_reset() clears all the registers (via the call to memset), so the subsequent sdhci_insert_eject_cb() call never sees the card insert interrupt enabled. However, not calling the insert_eject_cb results in prnsts remaining 0, when it actually needs to be updated to indicate card presence and R/O status. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26MAINTAINERS: Add some missing ARM related header filesThomas Huth1-0/+4
Some header files in the include/hw/arm/ directory can be assigned to entries in the MAINTAINERS file. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1456399324-24259-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26raspi: fix SD card with recent sdhci changesAndrew Baumann3-0/+30
Recent changes to sdhci broke SD on raspi. This change mirrors the logic to create the SD card device at the board level. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456351128-5560-1-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26ARM: PL061: Checking register r/w accesses to reserved areaWei Huang1-8/+22
pl061.c emulates two GPIO devices, ARM PL061 and TI Stellaris, which share the same read/write functions (pl061_read and pl061_write). However PL061 and Stellaris have different GPIO register definitions and pl061_read()/pl061_write() doesn't check it. This patch enforces checking on offset, preventing R/W into the reserved memory area. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1455814580-17699-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM trapsPeter Maydell1-7/+36
Implement the performance monitor register traps controlled by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance registers already have an access function to deal with the user-enable bit, and the TPM checks can be added there. We also need a new access function which only implements the TPM checks for use by the few not-EL0-accessible registers and by PMUSERENR_EL0 (which is always EL0-readable). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455892784-11328-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
2016-02-26target-arm: Fix handling of SDCR for 32-bit codePeter Maydell2-8/+19
Fix two issues with our implementation of the SDCR: * it is only present from ARMv8 onwards * it does not contain several of the trap bits present in its 64-bit counterpart the MDCR_EL3 Put the register description in the right place so that it does not get enabled for ARMv7 and earlier, and give it a write function so that we can mask out the bits which should not be allowed to have an effect if EL3 is 32-bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455892784-11328-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
2016-02-26target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1Peter Maydell1-0/+10
If HCR.TGE is 1 then mode changes via CPS and MSR from Monitor to NonSecure PL1 modes are illegal mode changes. Implement this check in bad_mode_switch(). (We don't currently implement HCR.TGE, but this is the only missing check from the v8 ARM ARM G1.9.3 and so it's worth adding now; the rest of the HCR.TGE checks can be added later as necessary.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-12-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Make mode switches from Hyp via CPS and MRS illegalPeter Maydell1-2/+10
Mode switches from Hyp to any other mode via the CPS and MRS instructions are illegal mode switches (though obviously switching via exception return is valid). Add this check to bad_mode_switch(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-11-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: In v8, make illegal AArch32 mode changes set PSTATE.ILPeter Maydell1-3/+12
In v8, the illegal mode changes which are UNPREDICTABLE in v7 are given architected behaviour: * the mode field is unchanged * PSTATE.IL is set (so any subsequent instructions will UNDEF) * any other CPSR fields are written to as normal This is pretty much the same behaviour we picked for our UNPREDICTABLE handling, with the exception that for v8 we need to set the IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-10-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Forbid mode switch to Mon from Secure EL1Peter Maydell1-1/+1
In v8 trying to switch mode to Mon from Secure EL1 is an illegal mode switch. (In v7 this is impossible as all secure modes except User are at EL3.) We can handle this case by making a switch to Mon valid only if the current EL is 3, which then gives the correct answer whether EL3 is AArch32 or AArch64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-9-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add Hyp mode checks to bad_mode_switch()Peter Maydell1-0/+3
We don't actually support Hyp mode yet, but add the correct checks for it to the bad_mode_switch() function for completeness. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-8-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add comment about not implementing NSACR.RFRPeter Maydell1-0/+3
QEMU doesn't implement the NSACR.RFR bit, which is a permitted IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8. Add a comment to bad_mode_switch() to note that this is why FIQ is always a valid mode regardless of the CPU's Secure state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-7-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: In cpsr_write() ignore mode switches from User modePeter Maydell1-0/+1
The only case where we can attempt a cpsr_write() mode switch from User is from the gdbstub; all other cases are handled in the calling code (notably translate.c). Architecturally attempts to alter the mode bits from user mode are simply ignored (and not treated as a bad mode switch, which in v8 sets CPSR.IL). Make mode switches from User ignored in cpsr_write() as well, for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-6-git-send-email-peter.maydell@linaro.org
2016-02-26linux-user: Use restrictive mask when calling cpsr_write()Peter Maydell2-2/+3
When linux-user code is calling cpsr_write(), use a restrictive mask to ensure we are limiting the set of CPSR bits we update. In particular, don't allow the mode bits to be changed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Raw CPSR writes should skip checks and bank switchingPeter Maydell4-6/+7
Raw CPSR writes should skip the architectural checks for whether we're allowed to set the A or F bits and should also not do the switching of register banks if the mode changes. Handle this inside cpsr_write(), which allows us to drop the "manually set the mode bits to avoid the bank switch" code from all the callsites which are using CPSRWriteRaw. This fixes a bug in 32-bit KVM handling where we had forgotten the "manually set the mode bits" part and could thus potentially trash the register state if the mode from the last exit to userspace differed from the mode on this exit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add write_type argument to cpsr_write()Peter Maydell10-16/+26
Add an argument to cpsr_write() to indicate what kind of CPSR write is being requested, since the exact behaviour should differ for the different cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Give CPSR setting on 32-bit exception return its own helperPeter Maydell3-3/+10
The rules for setting the CPSR on a 32-bit exception return are subtly different from those for setting the CPSR via an instruction like MSR or CPS. (In particular, in Hyp mode changing the mode bits is not valid via MSR or CPS.) Split the exception-return case into its own helper for setting CPSR, so we can eventually handle them differently in the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org
2016-02-26migration/vmstate: document VMStateFlagsSascha Silbe1-10/+90
The VMState API is rather sparsely documented. Start by describing the meaning of all VMStateFlags. Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-Id: <1456474693-11662-1-git-send-email-silbe@linux.vnet.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26MAINTAINERS: Add docs/migration.txt to the "Migration" sectionThomas Huth1-0/+1
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1456393669-20678-1-git-send-email-thuth@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160226' into stagingPeter Maydell8-14/+525
MIPS patches 2016-02-26 Changes: * support for FPU and MSA in KVM guest * support for R6 Virtual Processors # gpg: Signature made Fri 26 Feb 2016 11:07:37 GMT using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160226: target-mips: implement R6 multi-threading mips/kvm: Support MSA in MIPS KVM guests mips/kvm: Support FPU in MIPS KVM guests mips/kvm: Support signed 64-bit KVM registers mips/kvm: Support unsigned KVM registers mips/kvm: Implement Config CP0 registers mips/kvm: Implement PRid CP0 register mips/kvm: Remove a couple of noisy DPRINTFs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' ↵Peter Maydell4-0/+0
into staging Update OpenBIOS images # gpg: Signature made Fri 26 Feb 2016 10:45:04 GMT using RSA key ID AE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" * remotes/mcayland/tags/qemu-openbios-signed: Update OpenBIOS images Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26Update OpenBIOS imagesMark Cave-Ayland4-0/+0
Update OpenBIOS images to SVN r1391 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-02-26migration/postcopy-ram: Guard use of sys/eventfd.h with CONFIG_EVENTFDMatthew Fortune1-2/+2
sys/eventfd.h was being guarded only by a check for linux but does not exist on older distributions like CentOS 5. Move the include into the code that uses it and add an appropriate guard. Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <6D39441BF12EF246A7ABCE6654B023536BB85DEB@hhmail02.hh.imgtec.org> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26migration: reorder code to make it symmetricWei Yang1-3/+2
In qemu_savevm_state_complete_precopy(), it iterates on each device to add a json object and transfer related status to destination, while the order of the last two steps could be refined. Current order: json_start_object() save_section_header() vmstate_save() json_end_object() save_section_footer() After the change: json_start_object() save_section_header() vmstate_save() save_section_footer() json_end_object() This patch reorder the code to to make it symmetric. No functional change. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1454626230-16334-1-git-send-email-richard.weiyang@gmail.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26target-mips: implement R6 multi-threadingYongbok Kim7-1/+151
MIPS Release 6 provides multi-threading features which replace pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new CP0.Config5.VP (Virtual Processor) bit which indicates presence of multi-threading support which includes CP0.GlobalNumber register and DVP/EVP instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Support MSA in MIPS KVM guestsJames Hogan1-20/+109
Support the new KVM_CAP_MIPS_MSA capability, which allows MIPS SIMD Architecture (MSA) to be exposed to the KVM guest. The capability is enabled if the guest core has MSA according to its Config3 register. Various config bits are now writeable so that KVM is aware of the configuration (Config3.MSAP) and so that QEMU can save/restore the guest modifiable bits (Config5.MSAEn). The MSACSR/MSAIR registers and the MSA vector registers are now saved/restored. Since the FP registers are a subset of the vector registers, they are omitted if the guest has MSA. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Support FPU in MIPS KVM guestsJames Hogan1-4/+117
Support the new KVM_CAP_MIPS_FPU capability, which allows the host's FPU to be exposed to the KVM guest. The capability is enabled if the guest core has an FPU according to its Config1 register. Various config bits are now writeable so that KVM is aware of the configuration (Config1.FP) and so that QEMU can save/restore the guest modifiable bits (Config5.FRE, Config5.UFR, Config5.UFE). The FCSR/FIR registers and the floating point registers are now saved/restored (depending on the FR mode bit). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Support signed 64-bit KVM registersJames Hogan1-9/+31
Rename kvm_mips_{get,put}_one_reg64() to kvm_mips_{get,put}_one_ureg64() since they take an int64_t pointer, and add separate signed 64-bit accessors. These will be used for double precision floating point registers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Support unsigned KVM registersJames Hogan1-0/+22
Add KVM register access functions for the uint32_t type. This is required for FP and MSA control registers, which are represented as unsigned 32-bit integers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Implement Config CP0 registersJames Hogan1-0/+106
Implement saving and restoring to KVM state of the Config CP0 registers (namely Config, Config1, Config2, Config3, Config4, and Config5). These control the features available to a guest, and a few of the fields will soon be writeable by a guest so QEMU needs to know about them so as not to clobber them on migration/savevm. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Implement PRid CP0 registerJames Hogan1-0/+11
Implement saving and restoring to KVM state of the Processor ID (PRid) CP0 register. This allows QEMU to control the PRid exposed to the guest instead of using the default set by KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26mips/kvm: Remove a couple of noisy DPRINTFsJames Hogan1-2/+0
The DPRINTFs in cpu_mips_io_interrupts_pending() and kvm_arch_pre_run() are particularly noisy during normal execution, and also not particularly helpful. Remove them so that more important debug messages can be more easily seen. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-25Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2016-02-25-tag' ↵Peter Maydell12-61/+170
into staging qemu-ga patch queue for 2.6 * fix w32 build breakage when VSS enabled * fix up wchar handling in guest-set-user-password * fix re-install handling for w32 MSI installer * add w32 support for guest-get-vcpus * add support for enums in guest-file-seek SEEK params instead of relying on platform-specific integer values # gpg: Signature made Thu 25 Feb 2016 16:59:13 GMT using RSA key ID F108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" * remotes/mdroth/tags/qga-pull-2016-02-25-tag: qga: fix w32 breakage due to missing osdep.h includes qga: check utf8-to-utf16 conversion qga: fix off-by-one length check qga: use wide-chars constants for wchar_t comparisons qga: use size_t for wcslen() return value qga: use more idiomatic qemu-style eol operators qga: implement the guest-get-vcpus for windows qemu-ga: Fixed minor version switch issue qga: Support enum names in guest-file-seek Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25qga: fix w32 breakage due to missing osdep.h includesMichael Roth5-9/+8
requester.h relied on qemu/compiler.h definitions to handle GCC_FMT_ATTR() stub, but this include was removed as part of scripted clean-ups via 30456d5: all: Clean up includes under the assumption that all C files would have included it via qemu/osdep.h at that point. requester.cpp was likely missed due to C++ files requiring manual/special handling as well as VSS build options needing to be enabled to trigger build failures. Fix this by including qemu/osdep.h. That in turn pulls in a macro from qapi/error.h that conflicts with a struct field name in requester.h, so fix that as well by renaming the field. While we're at it, fix up provider.cpp/install.cpp to include osdep.h as well. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-25build: [bsd-user] Rename "syscall.h" to "target_syscall.h" in target directoriesLluís Vilanova5-1/+20
This fixes double-definitions in bsd-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25qga: check utf8-to-utf16 conversionMarc-André Lureau1-3/+16
UTF8 to UTF16 conversion can fail for genuine reasons, let's check errors. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: fix off-by-one length checkMarc-André Lureau1-1/+1
Laszlo Ersek said: "The length check is off by one (in the safe direction); it should be (nchars >= 2). The processing should be active for the wide string L"\r\n" -- resulting in the empty wide string --, I believe." Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: use wide-chars constants for wchar_t comparisonsMarc-André Lureau1-2/+4
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: use size_t for wcslen() return valueMarc-André Lureau1-1/+2
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: use more idiomatic qemu-style eol operatorsMarc-André Lureau1-3/+3
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: implement the guest-get-vcpus for windowsGal Hammer1-2/+66
Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> * report rather than assert when VCPU count == 0 * fix up subject: s/set-vcpus/get-vcpus/ Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qemu-ga: Fixed minor version switch issueLeonid Bloch1-1/+1
With automatically generated GUID, on minor version changes, an error occurred, stating that there is a problem with the installer. Now, a notification is shown, warning the user that another version of this product is already installed, and that configuration or removal of the existing version is possible through Add/Remove Programs on the Control Panel (expected behavior). Signed-off-by: Leonid Bloch <leonid@daynix.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-25qga: Support enum names in guest-file-seekEric Blake6-40/+70
Magic constants are a pain to use, especially when we run the risk that our choice of '1' for QGA_SEEK_CUR might differ from the host or guest's choice of SEEK_CUR. Better is to use an enum value, via a qapi alternate type for back-compatibility. With this, {"command":"guest-file-seek", "arguments":{"handle":1, "offset":0, "whence":"cur"}} becomes a synonym for the older {"command":"guest-file-seek", "arguments":{"handle":1, "offset":0, "whence":1}} Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 00:21:58 +0000