summaryrefslogtreecommitdiff
path: root/hw/onenand.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/onenand.c')
-rw-r--r--hw/onenand.c642
1 files changed, 642 insertions, 0 deletions
diff --git a/hw/onenand.c b/hw/onenand.c
new file mode 100644
index 0000000000..d63eceaf23
--- /dev/null
+++ b/hw/onenand.c
@@ -0,0 +1,642 @@
+/*
+ * OneNAND flash memories emulation.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "qemu-common.h"
+#include "flash.h"
+#include "irq.h"
+#include "sysemu.h"
+#include "block.h"
+
+/* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
+#define PAGE_SHIFT 11
+
+/* Fixed */
+#define BLOCK_SHIFT (PAGE_SHIFT + 6)
+
+struct onenand_s {
+ uint32_t id;
+ int shift;
+ target_phys_addr_t base;
+ qemu_irq intr;
+ qemu_irq rdy;
+ BlockDriverState *bdrv;
+ BlockDriverState *bdrv_cur;
+ uint8_t *image;
+ uint8_t *otp;
+ uint8_t *current;
+ ram_addr_t ram;
+ uint8_t *boot[2];
+ uint8_t *data[2][2];
+ int iomemtype;
+ int cycle;
+ int otpmode;
+
+ uint16_t addr[8];
+ uint16_t unladdr[8];
+ int bufaddr;
+ int count;
+ uint16_t command;
+ uint16_t config[2];
+ uint16_t status;
+ uint16_t intstatus;
+ uint16_t wpstatus;
+
+ struct ecc_state_s ecc;
+
+ int density_mask;
+ int secs;
+ int secs_cur;
+ int blocks;
+ uint8_t *blockwp;
+};
+
+enum {
+ ONEN_BUF_BLOCK = 0,
+ ONEN_BUF_BLOCK2 = 1,
+ ONEN_BUF_DEST_BLOCK = 2,
+ ONEN_BUF_DEST_PAGE = 3,
+ ONEN_BUF_PAGE = 7,
+};
+
+enum {
+ ONEN_ERR_CMD = 1 << 10,
+ ONEN_ERR_ERASE = 1 << 11,
+ ONEN_ERR_PROG = 1 << 12,
+ ONEN_ERR_LOAD = 1 << 13,
+};
+
+enum {
+ ONEN_INT_RESET = 1 << 4,
+ ONEN_INT_ERASE = 1 << 5,
+ ONEN_INT_PROG = 1 << 6,
+ ONEN_INT_LOAD = 1 << 7,
+ ONEN_INT = 1 << 15,
+};
+
+enum {
+ ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
+ ONEN_LOCK_LOCKED = 1 << 1,
+ ONEN_LOCK_UNLOCKED = 1 << 2,
+};
+
+void onenand_base_update(void *opaque, target_phys_addr_t new)
+{
+ struct onenand_s *s = (struct onenand_s *) opaque;
+
+ s->base = new;
+
+ /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
+ * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
+ * write boot commands. Also take note of the BWPS bit. */
+ cpu_register_physical_memory(s->base + (0x0000 << s->shift),
+ 0x0200 << s->shift, s->iomemtype);
+ cpu_register_physical_memory(s->base + (0x0200 << s->shift),
+ 0xbe00 << s->shift,
+ (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM);
+ if (s->iomemtype)
+ cpu_register_physical_memory(s->base + (0xc000 << s->shift),
+ 0x4000 << s->shift, s->iomemtype);
+}
+
+void onenand_base_unmap(void *opaque)
+{
+ struct onenand_s *s = (struct onenand_s *) opaque;
+
+ cpu_register_physical_memory(s->base,
+ 0x10000 << s->shift, IO_MEM_UNASSIGNED);
+}
+
+static void onenand_intr_update(struct onenand_s *s)
+{
+ qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
+}
+
+/* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
+static void onenand_reset(struct onenand_s *s, int cold)
+{
+ memset(&s->addr, 0, sizeof(s->addr));
+ s->command = 0;
+ s->count = 1;
+ s->bufaddr = 0;
+ s->config[0] = 0x40c0;
+ s->config[1] = 0x0000;
+ onenand_intr_update(s);
+ qemu_irq_raise(s->rdy);
+ s->status = 0x0000;
+ s->intstatus = cold ? 0x8080 : 0x8010;
+ s->unladdr[0] = 0;
+ s->unladdr[1] = 0;
+ s->wpstatus = 0x0002;
+ s->cycle = 0;
+ s->otpmode = 0;
+ s->bdrv_cur = s->bdrv;
+ s->current = s->image;
+ s->secs_cur = s->secs;
+
+ if (cold) {
+ /* Lock the whole flash */
+ memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
+
+ if (s->bdrv && bdrv_read(s->bdrv, 0, s->boot[0], 8) < 0)
+ cpu_abort(cpu_single_env, "%s: Loading the BootRAM failed.\n",
+ __FUNCTION__);
+ }
+}
+
+static inline int onenand_load_main(struct onenand_s *s, int sec, int secn,
+ void *dest)
+{
+ if (s->bdrv_cur)
+ return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;
+ else if (sec + secn > s->secs_cur)
+ return 1;
+
+ memcpy(dest, s->current + (sec << 9), secn << 9);
+
+ return 0;
+}
+
+static inline int onenand_prog_main(struct onenand_s *s, int sec, int secn,
+ void *src)
+{
+ if (s->bdrv_cur)
+ return bdrv_write(s->bdrv_cur, sec, src, secn) < 0;
+ else if (sec + secn > s->secs_cur)
+ return 1;
+
+ memcpy(s->current + (sec << 9), src, secn << 9);
+
+ return 0;
+}
+
+static inline int onenand_load_spare(struct onenand_s *s, int sec, int secn,
+ void *dest)
+{
+ uint8_t buf[512];
+
+ if (s->bdrv_cur) {
+ if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
+ return 1;
+ memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
+ } else if (sec + secn > s->secs_cur)
+ return 1;
+ else
+ memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
+
+ return 0;
+}
+
+static inline int onenand_prog_spare(struct onenand_s *s, int sec, int secn,
+ void *src)
+{
+ uint8_t buf[512];
+
+ if (s->bdrv_cur) {
+ if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
+ return 1;
+ memcpy(buf + ((sec & 31) << 4), src, secn << 4);
+ return bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0;
+ } else if (sec + secn > s->secs_cur)
+ return 1;
+
+ memcpy(s->current + (s->secs_cur << 9) + (sec << 4), src, secn << 4);
+
+ return 0;
+}
+
+static inline int onenand_erase(struct onenand_s *s, int sec, int num)
+{
+ /* TODO: optimise */
+ uint8_t buf[512];
+
+ memset(buf, 0xff, sizeof(buf));
+ for (; num > 0; num --, sec ++) {
+ if (onenand_prog_main(s, sec, 1, buf))
+ return 1;
+ if (onenand_prog_spare(s, sec, 1, buf))
+ return 1;
+ }
+
+ return 0;
+}
+
+static void onenand_command(struct onenand_s *s, int cmd)
+{
+ int b;
+ int sec;
+ void *buf;
+#define SETADDR(block, page) \
+ sec = (s->addr[page] & 3) + \
+ ((((s->addr[page] >> 2) & 0x3f) + \
+ (((s->addr[block] & 0xfff) | \
+ (s->addr[block] >> 15 ? \
+ s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
+#define SETBUF_M() \
+ buf = (s->bufaddr & 8) ? \
+ s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0]; \
+ buf += (s->bufaddr & 3) << 9;
+#define SETBUF_S() \
+ buf = (s->bufaddr & 8) ? \
+ s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1]; \
+ buf += (s->bufaddr & 3) << 4;
+
+ switch (cmd) {
+ case 0x00: /* Load single/multiple sector data unit into buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_M()
+ if (onenand_load_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+#if 0
+ SETBUF_S()
+ if (onenand_load_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+#endif
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+ break;
+ case 0x13: /* Load single/multiple spare sector into buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_S()
+ if (onenand_load_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+ break;
+ case 0x80: /* Program single/multiple sector data unit from buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_M()
+ if (onenand_prog_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+#if 0
+ SETBUF_S()
+ if (onenand_prog_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+#endif
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+ case 0x1a: /* Program single/multiple spare area sector from buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_S()
+ if (onenand_prog_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+ case 0x1b: /* Copy-back program */
+ SETBUF_S()
+
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+ if (onenand_load_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
+ if (onenand_prog_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ /* TODO: spare areas */
+
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+
+ case 0x23: /* Unlock NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ /* XXX the previous (?) area should be locked automatically */
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+ break;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
+ }
+ break;
+ case 0x2a: /* Lock NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+ break;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
+ }
+ break;
+ case 0x2c: /* Lock-tight NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
+ continue;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
+ }
+ break;
+
+ case 0x71: /* Erase-Verify-Read */
+ s->intstatus |= ONEN_INT;
+ break;
+ case 0x95: /* Multi-block erase */
+ qemu_irq_pulse(s->intr);
+ /* Fall through. */
+ case 0x94: /* Block erase */
+ sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
+ (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
+ << (BLOCK_SHIFT - 9);
+ if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
+
+ s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+ break;
+ case 0xb0: /* Erase suspend */
+ break;
+ case 0x30: /* Erase resume */
+ s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+ break;
+
+ case 0xf0: /* Reset NAND Flash core */
+ onenand_reset(s, 0);
+ break;
+ case 0xf3: /* Reset OneNAND */
+ onenand_reset(s, 0);
+ break;
+
+ case 0x65: /* OTP Access */
+ s->intstatus |= ONEN_INT;
+ s->bdrv_cur = 0;
+ s->current = s->otp;
+ s->secs_cur = 1 << (BLOCK_SHIFT - 9);
+ s->addr[ONEN_BUF_BLOCK] = 0;
+ s->otpmode = 1;
+ break;
+
+ default:
+ s->status |= ONEN_ERR_CMD;
+ s->intstatus |= ONEN_INT;
+ fprintf(stderr, "%s: unknown OneNAND command %x\n",
+ __FUNCTION__, cmd);
+ }
+
+ onenand_intr_update(s);
+}
+
+static uint32_t onenand_read(void *opaque, target_phys_addr_t addr)
+{
+ struct onenand_s *s = (struct onenand_s *) opaque;
+ int offset = (addr - s->base) >> s->shift;
+
+ switch (offset) {
+ case 0x0000 ... 0xc000:
+ return lduw_le_p(s->boot[0] + (addr - s->base));
+
+ case 0xf000: /* Manufacturer ID */
+ return (s->id >> 16) & 0xff;
+ case 0xf001: /* Device ID */
+ return (s->id >> 8) & 0xff;
+ /* TODO: get the following values from a real chip! */
+ case 0xf002: /* Version ID */
+ return (s->id >> 0) & 0xff;
+ case 0xf003: /* Data Buffer size */
+ return 1 << PAGE_SHIFT;
+ case 0xf004: /* Boot Buffer size */
+ return 0x200;
+ case 0xf005: /* Amount of buffers */
+ return 1 | (2 << 8);
+ case 0xf006: /* Technology */
+ return 0;
+
+ case 0xf100 ... 0xf107: /* Start addresses */
+ return s->addr[offset - 0xf100];
+
+ case 0xf200: /* Start buffer */
+ return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
+
+ case 0xf220: /* Command */
+ return s->command;
+ case 0xf221: /* System Configuration 1 */
+ return s->config[0] & 0xffe0;
+ case 0xf222: /* System Configuration 2 */
+ return s->config[1];
+
+ case 0xf240: /* Controller Status */
+ return s->status;
+ case 0xf241: /* Interrupt */
+ return s->intstatus;
+ case 0xf24c: /* Unlock Start Block Address */
+ return s->unladdr[0];
+ case 0xf24d: /* Unlock End Block Address */
+ return s->unladdr[1];
+ case 0xf24e: /* Write Protection Status */
+ return s->wpstatus;
+
+ case 0xff00: /* ECC Status */
+ return 0x00;
+ case 0xff01: /* ECC Result of main area data */
+ case 0xff02: /* ECC Result of spare area data */
+ case 0xff03: /* ECC Result of main area data */
+ case 0xff04: /* ECC Result of spare area data */
+ cpu_abort(cpu_single_env, "%s: imeplement ECC\n", __FUNCTION__);
+ return 0x0000;
+ }
+
+ fprintf(stderr, "%s: unknown OneNAND register %x\n",
+ __FUNCTION__, offset);
+ return 0;
+}
+
+static void onenand_write(void *opaque, target_phys_addr_t addr,
+ uint32_t value)
+{
+ struct onenand_s *s = (struct onenand_s *) opaque;
+ int offset = (addr - s->base) >> s->shift;
+ int sec;
+
+ switch (offset) {
+ case 0x0000 ... 0x01ff:
+ case 0x8000 ... 0x800f:
+ if (s->cycle) {
+ s->cycle = 0;
+
+ if (value == 0x0000) {
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+ onenand_load_main(s, sec,
+ 1 << (PAGE_SHIFT - 9), s->data[0][0]);
+ s->addr[ONEN_BUF_PAGE] += 4;
+ s->addr[ONEN_BUF_PAGE] &= 0xff;
+ }
+ break;
+ }
+
+ switch (value) {
+ case 0x00f0: /* Reset OneNAND */
+ onenand_reset(s, 0);
+ break;
+
+ case 0x00e0: /* Load Data into Buffer */
+ s->cycle = 1;
+ break;
+
+ case 0x0090: /* Read Identification Data */
+ memset(s->boot[0], 0, 3 << s->shift);
+ s->boot[0][0 << s->shift] = (s->id >> 16) & 0xff;
+ s->boot[0][1 << s->shift] = (s->id >> 8) & 0xff;
+ s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
+ break;
+
+ default:
+ fprintf(stderr, "%s: unknown OneNAND boot command %x\n",
+ __FUNCTION__, value);
+ }
+ break;
+
+ case 0xf100 ... 0xf107: /* Start addresses */
+ s->addr[offset - 0xf100] = value;
+ break;
+
+ case 0xf200: /* Start buffer */
+ s->bufaddr = (value >> 8) & 0xf;
+ if (PAGE_SHIFT == 11)
+ s->count = (value & 3) ?: 4;
+ else if (PAGE_SHIFT == 10)
+ s->count = (value & 1) ?: 2;
+ break;
+
+ case 0xf220: /* Command */
+ if (s->intstatus & (1 << 15))
+ break;
+ s->command = value;
+ onenand_command(s, s->command);
+ break;
+ case 0xf221: /* System Configuration 1 */
+ s->config[0] = value;
+ onenand_intr_update(s);
+ qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
+ break;
+ case 0xf222: /* System Configuration 2 */
+ s->config[1] = value;
+ break;
+
+ case 0xf241: /* Interrupt */
+ s->intstatus &= value;
+ if ((1 << 15) & ~s->intstatus)
+ s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
+ ONEN_ERR_PROG | ONEN_ERR_LOAD);
+ onenand_intr_update(s);
+ break;
+ case 0xf24c: /* Unlock Start Block Address */
+ s->unladdr[0] = value & (s->blocks - 1);
+ /* For some reason we have to set the end address to by default
+ * be same as start because the software forgets to write anything
+ * in there. */
+ s->unladdr[1] = value & (s->blocks - 1);
+ break;
+ case 0xf24d: /* Unlock End Block Address */
+ s->unladdr[1] = value & (s->blocks - 1);
+ break;
+
+ default:
+ fprintf(stderr, "%s: unknown OneNAND register %x\n",
+ __FUNCTION__, offset);
+ }
+}
+
+static CPUReadMemoryFunc *onenand_readfn[] = {
+ onenand_read, /* TODO */
+ onenand_read,
+ onenand_read,
+};
+
+static CPUWriteMemoryFunc *onenand_writefn[] = {
+ onenand_write, /* TODO */
+ onenand_write,
+ onenand_write,
+};
+
+void *onenand_init(uint32_t id, int regshift, qemu_irq irq)
+{
+ struct onenand_s *s = (struct onenand_s *) qemu_mallocz(sizeof(*s));
+ int bdrv_index = drive_get_index(IF_MTD, 0, 0);
+ uint32_t size = 1 << (24 + ((id >> 12) & 7));
+ void *ram;
+
+ s->shift = regshift;
+ s->intr = irq;
+ s->rdy = 0;
+ s->id = id;
+ s->blocks = size >> BLOCK_SHIFT;
+ s->secs = size >> 9;
+ s->blockwp = qemu_malloc(s->blocks);
+ s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0;
+ s->iomemtype = cpu_register_io_memory(0, onenand_readfn,
+ onenand_writefn, s);
+ if (bdrv_index == -1)
+ s->image = memset(qemu_malloc(size + (size >> 5)),
+ 0xff, size + (size >> 5));
+ else
+ s->bdrv = drives_table[bdrv_index].bdrv;
+ s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT),
+ 0xff, (64 + 2) << PAGE_SHIFT);
+ s->ram = qemu_ram_alloc(0xc000 << s->shift);
+ ram = phys_ram_base + s->ram;
+ s->boot[0] = ram + (0x0000 << s->shift);
+ s->boot[1] = ram + (0x8000 << s->shift);
+ s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
+ s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
+ s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
+ s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
+
+ onenand_reset(s, 1);
+
+ return s;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 18:20:59 +0000