diff options
| author | bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162> | 2006-04-27 21:32:09 +0000 |
|---|---|---|
| committer | bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162> | 2006-04-27 21:32:09 +0000 |
| commit | 27c7ca7e7750063f6e83e4d126bbd4de2d83f79e (patch) | |
| tree | 39df4cddd799e11c9a527f529855c89f072b1d8c /hw | |
| parent | fdf9b3e831e8e6b5ceb2a44c742da7d1ab558242 (diff) | |
| download | qemu-27c7ca7e7750063f6e83e4d126bbd4de2d83f79e.tar.gz qemu-27c7ca7e7750063f6e83e4d126bbd4de2d83f79e.tar.bz2 qemu-27c7ca7e7750063f6e83e4d126bbd4de2d83f79e.zip | |
SHIX board emulation (Samuel Tardieu)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1862 c046a42c-6fe2-441c-8c8c-71466251a162
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/sh7750.c | 836 | ||||
| -rw-r--r-- | hw/sh7750_regnames.c | 128 | ||||
| -rw-r--r-- | hw/sh7750_regnames.h | 6 | ||||
| -rw-r--r-- | hw/sh7750_regs.h | 1623 | ||||
| -rw-r--r-- | hw/shix.c | 111 | ||||
| -rw-r--r-- | hw/tc58128.c | 181 |
6 files changed, 2885 insertions, 0 deletions
diff --git a/hw/sh7750.c b/hw/sh7750.c new file mode 100644 index 0000000000..041e3eed1b --- /dev/null +++ b/hw/sh7750.c @@ -0,0 +1,836 @@ +/* + * SH7750 device + * + * Copyright (c) 2005 Samuel Tardieu + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include <stdio.h> +#include <assert.h> +#include "vl.h" +#include "sh7750_regs.h" +#include "sh7750_regnames.h" + +typedef struct { + uint8_t data[16]; + uint8_t length; /* Number of characters in the FIFO */ + uint8_t write_idx; /* Index of first character to write */ + uint8_t read_idx; /* Index of first character to read */ +} fifo; + +#define NB_DEVICES 4 + +typedef struct SH7750State { + /* CPU */ + CPUSH4State *cpu; + /* Peripheral frequency in Hz */ + uint32_t periph_freq; + /* SDRAM controller */ + uint16_t rfcr; + /* First serial port */ + CharDriverState *serial1; + uint8_t scscr1; + uint8_t scsmr1; + uint8_t scbrr1; + uint8_t scssr1; + uint8_t scssr1_read; + uint8_t sctsr1; + uint8_t sctsr1_loaded; + uint8_t sctdr1; + uint8_t scrdr1; + /* Second serial port */ + CharDriverState *serial2; + uint16_t sclsr2; + uint16_t scscr2; + uint16_t scfcr2; + uint16_t scfsr2; + uint16_t scsmr2; + uint8_t scbrr2; + fifo serial2_receive_fifo; + fifo serial2_transmit_fifo; + /* Timers */ + uint8_t tstr; + /* Timer 0 */ + QEMUTimer *timer0; + uint16_t tcr0; + uint32_t tcor0; + uint32_t tcnt0; + /* IO ports */ + uint16_t gpioic; + uint32_t pctra; + uint32_t pctrb; + uint16_t portdira; /* Cached */ + uint16_t portpullupa; /* Cached */ + uint16_t portdirb; /* Cached */ + uint16_t portpullupb; /* Cached */ + uint16_t pdtra; + uint16_t pdtrb; + uint16_t periph_pdtra; /* Imposed by the peripherals */ + uint16_t periph_portdira; /* Direction seen from the peripherals */ + uint16_t periph_pdtrb; /* Imposed by the peripherals */ + uint16_t periph_portdirb; /* Direction seen from the peripherals */ + sh7750_io_device *devices[NB_DEVICES]; /* External peripherals */ + /* Cache */ + uint32_t ccr; +} SH7750State; + +/********************************************************************** + Timers +**********************************************************************/ + +/* XXXXX At this time, timer0 works in underflow only mode, that is + the value of tcnt0 is read at alarm computation time and cannot + be read back by the guest OS */ + +static void start_timer0(SH7750State * s) +{ + uint64_t now, next, prescaler; + + if ((s->tcr0 & 6) == 6) { + fprintf(stderr, "rtc clock for timer 0 not supported\n"); + assert(0); + } + + if ((s->tcr0 & 7) == 5) { + fprintf(stderr, "timer 0 configuration not supported\n"); + assert(0); + } + + if ((s->tcr0 & 4) == 4) + prescaler = 1024; + else + prescaler = 4 << (s->tcr0 & 3); + + now = qemu_get_clock(vm_clock); + /* XXXXX */ + next = + now + muldiv64(prescaler * s->tcnt0, ticks_per_sec, + s->periph_freq); + if (next == now) + next = now + 1; + fprintf(stderr, "now=%016llx, next=%016llx\n", now, next); + fprintf(stderr, "timer will underflow in %f seconds\n", + (float) (next - now) / (float) ticks_per_sec); + + qemu_mod_timer(s->timer0, next); +} + +static void timer_start_changed(SH7750State * s) +{ + if (s->tstr & SH7750_TSTR_STR0) { + start_timer0(s); + } else { + fprintf(stderr, "timer 0 is stopped\n"); + qemu_del_timer(s->timer0); + } +} + +static void timer0_cb(void *opaque) +{ + SH7750State *s = opaque; + + s->tcnt0 = (uint32_t) 0; /* XXXXX */ + if (--s->tcnt0 == (uint32_t) - 1) { + fprintf(stderr, "timer 0 underflow\n"); + s->tcnt0 = s->tcor0; + s->tcr0 |= SH7750_TCR_UNF; + if (s->tcr0 & SH7750_TCR_UNIE) { + fprintf(stderr, + "interrupt generation for timer 0 not supported\n"); + assert(0); + } + } + start_timer0(s); +} + +static void init_timers(SH7750State * s) +{ + s->tcor0 = 0xffffffff; + s->tcnt0 = 0xffffffff; + s->timer0 = qemu_new_timer(vm_clock, &timer0_cb, s); +} + +/********************************************************************** + First serial port +**********************************************************************/ + +static int serial1_can_receive(void *opaque) +{ + SH7750State *s = opaque; + + return s->scscr1 & SH7750_SCSCR_RE; +} + +static void serial1_receive_char(SH7750State * s, uint8_t c) +{ + if (s->scssr1 & SH7750_SCSSR1_RDRF) { + s->scssr1 |= SH7750_SCSSR1_ORER; + return; + } + + s->scrdr1 = c; + s->scssr1 |= SH7750_SCSSR1_RDRF; +} + +static void serial1_receive(void *opaque, const uint8_t * buf, int size) +{ + SH7750State *s = opaque; + int i; + + for (i = 0; i < size; i++) { + serial1_receive_char(s, buf[i]); + } +} + +static void serial1_event(void *opaque, int event) +{ + assert(0); +} + +static void serial1_maybe_send(SH7750State * s) +{ + uint8_t c; + + if (s->scssr1 & SH7750_SCSSR1_TDRE) + return; + c = s->sctdr1; + s->scssr1 |= SH7750_SCSSR1_TDRE | SH7750_SCSSR1_TEND; + if (s->scscr1 & SH7750_SCSCR_TIE) { + fprintf(stderr, "interrupts for serial port 1 not implemented\n"); + assert(0); + } + /* XXXXX Check for errors in write */ + qemu_chr_write(s->serial1, &c, 1); +} + +static void serial1_change_scssr1(SH7750State * s, uint8_t mem_value) +{ + uint8_t new_flags; + + /* If transmit disable, TDRE and TEND stays up */ + if ((s->scscr1 & SH7750_SCSCR_TE) == 0) { + mem_value |= SH7750_SCSSR1_TDRE | SH7750_SCSSR1_TEND; + } + + /* Only clear bits which have been read before and do not set any bit + in the flags */ + new_flags = s->scssr1 & ~s->scssr1_read; /* Preserve unread flags */ + new_flags &= mem_value | ~s->scssr1_read; /* Clear read flags */ + + s->scssr1 = (new_flags & 0xf8) | (mem_value & 1); + s->scssr1_read &= mem_value; + + /* If TDRE has been cleared, TEND will also be cleared */ + if ((s->scssr1 & SH7750_SCSSR1_TDRE) == 0) { + s->scssr1 &= ~SH7750_SCSSR1_TEND; + } + + /* Check for transmission to start */ + serial1_maybe_send(s); +} + +static void serial1_update_parameters(SH7750State * s) +{ + QEMUSerialSetParams ssp; + + if (s->scsmr1 & SH7750_SCSMR_CHR_7) + ssp.data_bits = 7; + else + ssp.data_bits = 8; + if (s->scsmr1 & SH7750_SCSMR_PE) { + if (s->scsmr1 & SH7750_SCSMR_PM_ODD) + ssp.parity = 'O'; + else + ssp.parity = 'E'; + } else + ssp.parity = 'N'; + if (s->scsmr1 & SH7750_SCSMR_STOP_2) + ssp.stop_bits = 2; + else + ssp.stop_bits = 1; + fprintf(stderr, "SCSMR1=%04x SCBRR1=%02x\n", s->scsmr1, s->scbrr1); + ssp.speed = s->periph_freq / + (32 * s->scbrr1 * (1 << (2 * (s->scsmr1 & 3)))) - 1; + fprintf(stderr, "data bits=%d, stop bits=%d, parity=%c, speed=%d\n", + ssp.data_bits, ssp.stop_bits, ssp.parity, ssp.speed); + qemu_chr_ioctl(s->serial1, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); +} + +static void scscr1_changed(SH7750State * s) +{ + if (s->scscr1 & (SH7750_SCSCR_TE | SH7750_SCSCR_RE)) { + if (!s->serial1) { + fprintf(stderr, "serial port 1 not bound to anything\n"); + assert(0); + } + serial1_update_parameters(s); + } + if ((s->scscr1 & SH7750_SCSCR_RE) == 0) { + s->scssr1 |= SH7750_SCSSR1_TDRE; + } +} + +static void init_serial1(SH7750State * s, int serial_nb) +{ + CharDriverState *chr; + + s->scssr1 = 0x84; + chr = serial_hds[serial_nb]; + if (!chr) { + fprintf(stderr, + "no serial port associated to SH7750 first serial port\n"); + return; + } + + s->serial1 = chr; + qemu_chr_add_read_handler(chr, serial1_can_receive, + serial1_receive, s); + qemu_chr_add_event_handler(chr, serial1_event); +} + +/********************************************************************** + Second serial port +**********************************************************************/ + +static int serial2_can_receive(void *opaque) +{ + SH7750State *s = opaque; + static uint8_t max_fifo_size[] = { 15, 1, 4, 6, 8, 10, 12, 14 }; + + return s->serial2_receive_fifo.length < + max_fifo_size[(s->scfcr2 >> 9) & 7]; +} + +static void serial2_adjust_receive_flags(SH7750State * s) +{ + static uint8_t max_fifo_size[] = { 1, 4, 8, 14 }; + + /* XXXXX Add interrupt generation */ + if (s->serial2_receive_fifo.length >= + max_fifo_size[(s->scfcr2 >> 7) & 3]) { + s->scfsr2 |= SH7750_SCFSR2_RDF; + s->scfsr2 &= ~SH7750_SCFSR2_DR; + } else { + s->scfsr2 &= ~SH7750_SCFSR2_RDF; + if (s->serial2_receive_fifo.length > 0) + s->scfsr2 |= SH7750_SCFSR2_DR; + else + s->scfsr2 &= ~SH7750_SCFSR2_DR; + } +} + +static void serial2_append_char(SH7750State * s, uint8_t c) +{ + if (s->serial2_receive_fifo.length == 16) { + /* Overflow */ + s->sclsr2 |= SH7750_SCLSR2_ORER; + return; + } + + s->serial2_receive_fifo.data[s->serial2_receive_fifo.write_idx++] = c; + s->serial2_receive_fifo.length++; + serial2_adjust_receive_flags(s); +} + +static void serial2_receive(void *opaque, const uint8_t * buf, int size) +{ + SH7750State *s = opaque; + int i; + + for (i = 0; i < size; i++) + serial2_append_char(s, buf[i]); +} + +static void serial2_event(void *opaque, int event) +{ + /* XXXXX */ + assert(0); +} + +static void serial2_update_parameters(SH7750State * s) +{ + QEMUSerialSetParams ssp; + + if (s->scsmr2 & SH7750_SCSMR_CHR_7) + ssp.data_bits = 7; + else + ssp.data_bits = 8; + if (s->scsmr2 & SH7750_SCSMR_PE) { + if (s->scsmr2 & SH7750_SCSMR_PM_ODD) + ssp.parity = 'O'; + else + ssp.parity = 'E'; + } else + ssp.parity = 'N'; + if (s->scsmr2 & SH7750_SCSMR_STOP_2) + ssp.stop_bits = 2; + else + ssp.stop_bits = 1; + fprintf(stderr, "SCSMR2=%04x SCBRR2=%02x\n", s->scsmr2, s->scbrr2); + ssp.speed = s->periph_freq / + (32 * s->scbrr2 * (1 << (2 * (s->scsmr2 & 3)))) - 1; + fprintf(stderr, "data bits=%d, stop bits=%d, parity=%c, speed=%d\n", + ssp.data_bits, ssp.stop_bits, ssp.parity, ssp.speed); + qemu_chr_ioctl(s->serial2, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); +} + +static void scscr2_changed(SH7750State * s) +{ + if (s->scscr2 & (SH7750_SCSCR_TE | SH7750_SCSCR_RE)) { + if (!s->serial2) { + fprintf(stderr, "serial port 2 not bound to anything\n"); + assert(0); + } + serial2_update_parameters(s); + } +} + +static void init_serial2(SH7750State * s, int serial_nb) +{ + CharDriverState *chr; + + s->scfsr2 = 0x0060; + + chr = serial_hds[serial_nb]; + if (!chr) { + fprintf(stderr, + "no serial port associated to SH7750 second serial port\n"); + return; + } + + s->serial2 = chr; + qemu_chr_add_read_handler(chr, serial2_can_receive, + serial2_receive, s); + qemu_chr_add_event_handler(chr, serial2_event); +} + +static void init_serial_ports(SH7750State * s) +{ + init_serial1(s, 0); + init_serial2(s, 1); +} + +/********************************************************************** + I/O ports +**********************************************************************/ + +int sh7750_register_io_device(SH7750State * s, sh7750_io_device * device) +{ + int i; + + for (i = 0; i < NB_DEVICES; i++) { + if (s->devices[i] == NULL) { + s->devices[i] = device; + return 0; + } + } + return -1; +} + +static uint16_t portdir(uint32_t v) +{ +#define EVENPORTMASK(n) ((v & (1<<((n)<<1))) >> (n)) + return + EVENPORTMASK(15) | EVENPORTMASK(14) | EVENPORTMASK(13) | + EVENPORTMASK(12) | EVENPORTMASK(11) | EVENPORTMASK(10) | + EVENPORTMASK(9) | EVENPORTMASK(8) | EVENPORTMASK(7) | + EVENPORTMASK(6) | EVENPORTMASK(5) | EVENPORTMASK(4) | + EVENPORTMASK(3) | EVENPORTMASK(2) | EVENPORTMASK(1) | + EVENPORTMASK(0); +} + +static uint16_t portpullup(uint32_t v) +{ +#define ODDPORTMASK(n) ((v & (1<<(((n)<<1)+1))) >> (n)) + return + ODDPORTMASK(15) | ODDPORTMASK(14) | ODDPORTMASK(13) | + ODDPORTMASK(12) | ODDPORTMASK(11) | ODDPORTMASK(10) | + ODDPORTMASK(9) | ODDPORTMASK(8) | ODDPORTMASK(7) | ODDPORTMASK(6) | + ODDPORTMASK(5) | ODDPORTMASK(4) | ODDPORTMASK(3) | ODDPORTMASK(2) | + ODDPORTMASK(1) | ODDPORTMASK(0); +} + +static uint16_t porta_lines(SH7750State * s) +{ + return (s->portdira & s->pdtra) | /* CPU */ + (s->periph_portdira & s->periph_pdtra) | /* Peripherals */ + (~(s->portdira | s->periph_portdira) & s->portpullupa); /* Pullups */ +} + +static uint16_t portb_lines(SH7750State * s) +{ + return (s->portdirb & s->pdtrb) | /* CPU */ + (s->periph_portdirb & s->periph_pdtrb) | /* Peripherals */ + (~(s->portdirb | s->periph_portdirb) & s->portpullupb); /* Pullups */ +} + +static void gen_port_interrupts(SH7750State * s) +{ + /* XXXXX interrupts not generated */ +} + +static void porta_changed(SH7750State * s, uint16_t prev) +{ + uint16_t currenta, changes; + int i, r = 0; + +#if 0 + fprintf(stderr, "porta changed from 0x%04x to 0x%04x\n", + prev, porta_lines(s)); + fprintf(stderr, "pdtra=0x%04x, pctra=0x%08x\n", s->pdtra, s->pctra); +#endif + currenta = porta_lines(s); + if (currenta == prev) + return; + changes = currenta ^ prev; + + for (i = 0; i < NB_DEVICES; i++) { + if (s->devices[i] && (s->devices[i]->portamask_trigger & changes)) { + r |= s->devices[i]->port_change_cb(currenta, portb_lines(s), + &s->periph_pdtra, + &s->periph_portdira, + &s->periph_pdtrb, + &s->periph_portdirb); + } + } + + if (r) + gen_port_interrupts(s); +} + +static void portb_changed(SH7750State * s, uint16_t prev) +{ + uint16_t currentb, changes; + int i, r = 0; + + currentb = portb_lines(s); + if (currentb == prev) + return; + changes = currentb ^ prev; + + for (i = 0; i < NB_DEVICES; i++) { + if (s->devices[i] && (s->devices[i]->portbmask_trigger & changes)) { + r |= s->devices[i]->port_change_cb(portb_lines(s), currentb, + &s->periph_pdtra, + &s->periph_portdira, + &s->periph_pdtrb, + &s->periph_portdirb); + } + } + + if (r) + gen_port_interrupts(s); +} + +/********************************************************************** + Memory +**********************************************************************/ + +static void error_access(const char *kind, target_phys_addr_t addr) +{ + fprintf(stderr, "%s to %s (0x%08x) not supported\n", + kind, regname(addr), addr); +} + +static void ignore_access(const char *kind, target_phys_addr_t addr) +{ + fprintf(stderr, "%s to %s (0x%08x) ignored\n", + kind, regname(addr), addr); +} + +static uint32_t sh7750_mem_readb(void *opaque, target_phys_addr_t addr) +{ + SH7750State *s = opaque; + uint8_t r; + + switch (addr) { + case SH7750_SCSSR1_A7: + r = s->scssr1; + s->scssr1_read |= r; + return s->scssr1; + case SH7750_SCRDR1_A7: + s->scssr1 &= ~SH7750_SCSSR1_RDRF; + return s->scrdr1; + default: + error_access("byte read", addr); + assert(0); + } +} + +static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr) +{ + SH7750State *s = opaque; + uint16_t r; + + switch (addr) { + case SH7750_RFCR_A7: + fprintf(stderr, + "Read access to refresh count register, incrementing\n"); + return s->rfcr++; + case SH7750_TCR0_A7: + return s->tcr0; + case SH7750_SCLSR2_A7: + /* Read and clear overflow bit */ + r = s->sclsr2; + s->sclsr2 = 0; + return r; + case SH7750_SCSFR2_A7: + return s->scfsr2; + case SH7750_PDTRA_A7: + return porta_lines(s); + case SH7750_PDTRB_A7: + return portb_lines(s); + default: + error_access("word read", addr); + assert(0); + } +} + +static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr) +{ + SH7750State *s = opaque; + + switch (addr) { + case SH7750_MMUCR_A7: + return s->cpu->mmucr; + case SH7750_PTEH_A7: + return s->cpu->pteh; + case SH7750_PTEL_A7: + return s->cpu->ptel; + case SH7750_TTB_A7: + return s->cpu->ttb; + case SH7750_TEA_A7: + return s->cpu->tea; + case SH7750_TRA_A7: + return s->cpu->tra; + case SH7750_EXPEVT_A7: + return s->cpu->expevt; + case SH7750_INTEVT_A7: + return s->cpu->intevt; + case SH7750_CCR_A7: + return s->ccr; + case 0x1f000030: /* Processor version PVR */ + return 0x00050000; /* SH7750R */ + case 0x1f000040: /* Processor version CVR */ + return 0x00110000; /* Minimum caches */ + case 0x1f000044: /* Processor version PRR */ + return 0x00000100; /* SH7750R */ + default: + error_access("long read", addr); + assert(0); + } +} + +static void sh7750_mem_writeb(void *opaque, target_phys_addr_t addr, + uint32_t mem_value) +{ + SH7750State *s = opaque; + + switch (addr) { + /* PRECHARGE ? XXXXX */ + case SH7750_PRECHARGE0_A7: + case SH7750_PRECHARGE1_A7: + ignore_access("byte write", addr); + return; + case SH7750_SCBRR2_A7: + s->scbrr2 = mem_value; + return; + case SH7750_TSTR_A7: + s->tstr = mem_value; + timer_start_changed(s); + return; + case SH7750_SCSCR1_A7: + s->scscr1 = mem_value; + scscr1_changed(s); + return; + case SH7750_SCSMR1_A7: + s->scsmr1 = mem_value; + return; + case SH7750_SCBRR1_A7: + s->scbrr1 = mem_value; + return; + case SH7750_SCTDR1_A7: + s->scssr1 &= ~SH7750_SCSSR1_TEND; + s->sctdr1 = mem_value; + return; + case SH7750_SCSSR1_A7: + serial1_change_scssr1(s, mem_value); + return; + default: + error_access("byte write", addr); + assert(0); + } +} + +static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr, + uint32_t mem_value) +{ + SH7750State *s = opaque; + uint16_t temp; + + switch (addr) { + /* SDRAM controller */ + case SH7750_SCBRR1_A7: + case SH7750_SCBRR2_A7: + case SH7750_BCR2_A7: + case SH7750_BCR3_A7: + case SH7750_RTCOR_A7: + case SH7750_RTCNT_A7: + case SH7750_RTCSR_A7: + ignore_access("word write", addr); + return; + /* IO ports */ + case SH7750_PDTRA_A7: + temp = porta_lines(s); + s->pdtra = mem_value; + porta_changed(s, temp); + return; + case SH7750_PDTRB_A7: + temp = portb_lines(s); + s->pdtrb = mem_value; + portb_changed(s, temp); + return; + case SH7750_RFCR_A7: + fprintf(stderr, "Write access to refresh count register\n"); + s->rfcr = mem_value; + return; + case SH7750_SCLSR2_A7: + s->sclsr2 = mem_value; + return; + case SH7750_SCSCR2_A7: + s->scscr2 = mem_value; + scscr2_changed(s); + return; + case SH7750_SCFCR2_A7: + s->scfcr2 = mem_value; + return; + case SH7750_SCSMR2_A7: + s->scsmr2 = mem_value; + return; + case SH7750_TCR0_A7: + s->tcr0 = mem_value; + return; + case SH7750_GPIOIC_A7: + s->gpioic = mem_value; + if (mem_value != 0) { + fprintf(stderr, "I/O interrupts not implemented\n"); + assert(0); + } + return; + default: + error_access("word write", addr); + assert(0); + } +} + +static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr, + uint32_t mem_value) +{ + SH7750State *s = opaque; + uint16_t temp; + + switch (addr) { + /* SDRAM controller */ + case SH7750_BCR1_A7: + case SH7750_BCR4_A7: + case SH7750_WCR1_A7: + case SH7750_WCR2_A7: + case SH7750_WCR3_A7: + case SH7750_MCR_A7: + ignore_access("long write", addr); + return; + /* IO ports */ + case SH7750_PCTRA_A7: + temp = porta_lines(s); + s->pctra = mem_value; + s->portdira = portdir(mem_value); + s->portpullupa = portpullup(mem_value); + porta_changed(s, temp); + return; + case SH7750_PCTRB_A7: + temp = portb_lines(s); + s->pctrb = mem_value; + s->portdirb = portdir(mem_value); + s->portpullupb = portpullup(mem_value); + portb_changed(s, temp); + return; + case SH7750_TCNT0_A7: + s->tcnt0 = mem_value & 0xf; + return; + case SH7750_MMUCR_A7: + s->cpu->mmucr = mem_value; + return; + case SH7750_PTEH_A7: + s->cpu->pteh = mem_value; + return; + case SH7750_PTEL_A7: + s->cpu->ptel = mem_value; + return; + case SH7750_TTB_A7: + s->cpu->ttb = mem_value; + return; + case SH7750_TEA_A7: + s->cpu->tea = mem_value; + return; + case SH7750_TRA_A7: + s->cpu->tra = mem_value & 0x000007ff; + return; + case SH7750_EXPEVT_A7: + s->cpu->expevt = mem_value & 0x000007ff; + return; + case SH7750_INTEVT_A7: + s->cpu->intevt = mem_value & 0x000007ff; + return; + case SH7750_CCR_A7: + s->ccr = mem_value; + return; + default: + error_access("long write", addr); + assert(0); + } +} + +static CPUReadMemoryFunc *sh7750_mem_read[] = { + sh7750_mem_readb, + sh7750_mem_readw, + sh7750_mem_readl +}; + +static CPUWriteMemoryFunc *sh7750_mem_write[] = { + sh7750_mem_writeb, + sh7750_mem_writew, + sh7750_mem_writel +}; + +SH7750State *sh7750_init(CPUSH4State * cpu) +{ + SH7750State *s; + int sh7750_io_memory; + + s = qemu_mallocz(sizeof(SH7750State)); + s->cpu = cpu; + s->periph_freq = 60000000; /* 60MHz */ + sh7750_io_memory = cpu_register_io_memory(0, + sh7750_mem_read, + sh7750_mem_write, s); + cpu_register_physical_memory(0x1c000000, 0x04000000, sh7750_io_memory); + init_timers(s); + init_serial_ports(s); + return s; +} diff --git a/hw/sh7750_regnames.c b/hw/sh7750_regnames.c new file mode 100644 index 0000000000..5fcb0d6cca --- /dev/null +++ b/hw/sh7750_regnames.c @@ -0,0 +1,128 @@ +#include "vl.h" +#include "sh7750_regs.h" + +#define REGNAME(r) {r, #r}, + +typedef struct { + uint32_t regaddr; + const char *regname; +} regname_t; + +static regname_t regnames[] = { + REGNAME(SH7750_PTEH_A7) + REGNAME(SH7750_PTEL_A7) + REGNAME(SH7750_PTEA_A7) + REGNAME(SH7750_TTB_A7) + REGNAME(SH7750_TEA_A7) + REGNAME(SH7750_MMUCR_A7) + REGNAME(SH7750_CCR_A7) + REGNAME(SH7750_QACR0_A7) + REGNAME(SH7750_QACR1_A7) + REGNAME(SH7750_TRA_A7) + REGNAME(SH7750_EXPEVT_A7) + REGNAME(SH7750_INTEVT_A7) + REGNAME(SH7750_STBCR_A7) + REGNAME(SH7750_STBCR2_A7) + REGNAME(SH7750_FRQCR_A7) + REGNAME(SH7750_WTCNT_A7) + REGNAME(SH7750_WTCSR_A7) + REGNAME(SH7750_R64CNT_A7) + REGNAME(SH7750_RSECCNT_A7) + REGNAME(SH7750_RMINCNT_A7) + REGNAME(SH7750_RHRCNT_A7) + REGNAME(SH7750_RWKCNT_A7) + REGNAME(SH7750_RDAYCNT_A7) + REGNAME(SH7750_RMONCNT_A7) + REGNAME(SH7750_RYRCNT_A7) + REGNAME(SH7750_RSECAR_A7) + REGNAME(SH7750_RMINAR_A7) + REGNAME(SH7750_RHRAR_A7) + REGNAME(SH7750_RWKAR_A7) + REGNAME(SH7750_RDAYAR_A7) + REGNAME(SH7750_RMONAR_A7) + REGNAME(SH7750_RCR1_A7) + REGNAME(SH7750_RCR2_A7) + REGNAME(SH7750_TOCR_A7) + REGNAME(SH7750_TSTR_A7) + REGNAME(SH7750_TCOR0_A7) + REGNAME(SH7750_TCOR1_A7) + REGNAME(SH7750_TCOR2_A7) + REGNAME(SH7750_TCNT0_A7) + REGNAME(SH7750_TCNT1_A7) + REGNAME(SH7750_TCNT2_A7) + REGNAME(SH7750_TCR0_A7) + REGNAME(SH7750_TCR1_A7) + REGNAME(SH7750_TCR2_A7) + REGNAME(SH7750_TCPR2_A7) + REGNAME(SH7750_BCR1_A7) + REGNAME(SH7750_BCR2_A7) + REGNAME(SH7750_WCR1_A7) + REGNAME(SH7750_WCR2_A7) + REGNAME(SH7750_WCR3_A7) + REGNAME(SH7750_MCR_A7) + REGNAME(SH7750_PCR_A7) + REGNAME(SH7750_RTCSR_A7) + REGNAME(SH7750_RTCNT_A7) + REGNAME(SH7750_RTCOR_A7) + REGNAME(SH7750_RFCR_A7) + REGNAME(SH7750_SAR0_A7) + REGNAME(SH7750_SAR1_A7) + REGNAME(SH7750_SAR2_A7) + REGNAME(SH7750_SAR3_A7) + REGNAME(SH7750_DAR0_A7) + REGNAME(SH7750_DAR1_A7) + REGNAME(SH7750_DAR2_A7) + REGNAME(SH7750_DAR3_A7) + REGNAME(SH7750_DMATCR0_A7) + REGNAME(SH7750_DMATCR1_A7) + REGNAME(SH7750_DMATCR2_A7) + REGNAME(SH7750_DMATCR3_A7) + REGNAME(SH7750_CHCR0_A7) + REGNAME(SH7750_CHCR1_A7) + REGNAME(SH7750_CHCR2_A7) + REGNAME(SH7750_CHCR3_A7) + REGNAME(SH7750_DMAOR_A7) + REGNAME(SH7750_SCRDR1_A7) + REGNAME(SH7750_SCRDR2_A7) + REGNAME(SH7750_SCTDR1_A7) + REGNAME(SH7750_SCTDR2_A7) + REGNAME(SH7750_SCSMR1_A7) + REGNAME(SH7750_SCSMR2_A7) + REGNAME(SH7750_SCSCR1_A7) + REGNAME(SH7750_SCSCR2_A7) + REGNAME(SH7750_SCSSR1_A7) + REGNAME(SH7750_SCSFR2_A7) + REGNAME(SH7750_SCSPTR1_A7) + REGNAME(SH7750_SCSPTR2_A7) + REGNAME(SH7750_SCBRR1_A7) + REGNAME(SH7750_SCBRR2_A7) + REGNAME(SH7750_SCFCR2_A7) + REGNAME(SH7750_SCFDR2_A7) + REGNAME(SH7750_SCLSR2_A7) + REGNAME(SH7750_SCSCMR1_A7) + REGNAME(SH7750_PCTRA_A7) + REGNAME(SH7750_PDTRA_A7) + REGNAME(SH7750_PCTRB_A7) + REGNAME(SH7750_PDTRB_A7) + REGNAME(SH7750_GPIOIC_A7) + REGNAME(SH7750_ICR_A7) + REGNAME(SH7750_IPRA_A7) + REGNAME(SH7750_IPRB_A7) + REGNAME(SH7750_IPRC_A7) + REGNAME(SH7750_BCR3_A7) + REGNAME(SH7750_BCR4_A7) + REGNAME(SH7750_PRECHARGE0_A7) + REGNAME(SH7750_PRECHARGE1_A7) {(uint32_t) - 1, 0} +}; + +const char *regname(uint32_t addr) +{ + unsigned int i; + + for (i = 0; regnames[i].regaddr != (uint32_t) - 1; i++) { + if (regnames[i].regaddr == addr) + return regnames[i].regname; + } + + return "<unknown reg>"; +} diff --git a/hw/sh7750_regnames.h b/hw/sh7750_regnames.h new file mode 100644 index 0000000000..7463709b4c --- /dev/null +++ b/hw/sh7750_regnames.h @@ -0,0 +1,6 @@ +#ifndef _SH7750_REGNAMES_H +#define _SH7750_REGNAMES_H + +const char *regname(uint32_t addr); + +#endif /* _SH7750_REGNAMES_H */ diff --git a/hw/sh7750_regs.h b/hw/sh7750_regs.h new file mode 100644 index 0000000000..44ae95be2b --- /dev/null +++ b/hw/sh7750_regs.h @@ -0,0 +1,1623 @@ +/* + * SH-7750 memory-mapped registers + * This file based on information provided in the following document: + * "Hitachi SuperH (tm) RISC engine. SH7750 Series (SH7750, SH7750S) + * Hardware Manual" + * Document Number ADE-602-124C, Rev. 4.0, 4/21/00, Hitachi Ltd. + * + * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia + * Author: Alexandra Kossovsky <sasha@oktet.ru> + * Victor V. Vengerov <vvv@oktet.ru> + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rtems.com/license/LICENSE. + * + * @(#) sh7750_regs.h,v 1.2.4.1 2003/09/04 18:46:00 joel Exp + */ + +#ifndef __SH7750_REGS_H__ +#define __SH7750_REGS_H__ + +/* + * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and + * in 0x1f000000 - 0x1fffffff (area 7 address) + */ +#define SH7750_P4_BASE 0xff000000 /* Accessable only in + priveleged mode */ +#define SH7750_A7_BASE 0x1f000000 /* Accessable only using TLB */ + +#define SH7750_P4_REG32(ofs) (SH7750_P4_BASE + (ofs)) +#define SH7750_A7_REG32(ofs) (SH7750_A7_BASE + (ofs)) + +/* + * MMU Registers + */ + +/* Page Table Entry High register - PTEH */ +#define SH7750_PTEH_REGOFS 0x000000 /* offset */ +#define SH7750_PTEH SH7750_P4_REG32(SH7750_PTEH_REGOFS) +#define SH7750_PTEH_A7 SH7750_A7_REG32(SH7750_PTEH_REGOFS) +#define SH7750_PTEH_VPN 0xfffffd00 /* Virtual page number */ +#define SH7750_PTEH_VPN_S 10 +#define SH7750_PTEH_ASID 0x000000ff /* Address space identifier */ +#define SH7750_PTEH_ASID_S 0 + +/* Page Table Entry Low register - PTEL */ +#define SH7750_PTEL_REGOFS 0x000004 /* offset */ +#define SH7750_PTEL SH7750_P4_REG32(SH7750_PTEL_REGOFS) +#define SH7750_PTEL_A7 SH7750_A7_REG32(SH7750_PTEL_REGOFS) +#define SH7750_PTEL_PPN 0x1ffffc00 /* Physical page number */ +#define SH7750_PTEL_PPN_S 10 +#define SH7750_PTEL_V 0x00000100 /* Validity (0-entry is invalid) */ +#define SH7750_PTEL_SZ1 0x00000080 /* Page size bit 1 */ +#define SH7750_PTEL_SZ0 0x00000010 /* Page size bit 0 */ +#define SH7750_PTEL_SZ_1KB 0x00000000 /* 1-kbyte page */ +#define SH7750_PTEL_SZ_4KB 0x00000010 /* 4-kbyte page */ +#define SH7750_PTEL_SZ_64KB 0x00000080 /* 64-kbyte page */ +#define SH7750_PTEL_SZ_1MB 0x00000090 /* 1-Mbyte page */ +#define SH7750_PTEL_PR 0x00000060 /* Protection Key Data */ +#define SH7750_PTEL_PR_ROPO 0x00000000 /* read-only in priv mode */ +#define SH7750_PTEL_PR_RWPO 0x00000020 /* read-write in priv mode */ +#define SH7750_PTEL_PR_ROPU 0x00000040 /* read-only in priv or user mode */ +#define SH7750_PTEL_PR_RWPU 0x00000060 /* read-write in priv or user mode */ +#define SH7750_PTEL_C 0x00000008 /* Cacheability + (0 - page not cacheable) */ +#define SH7750_PTEL_D 0x00000004 /* Dirty bit (1 - write has been + performed to a page) */ +#define SH7750_PTEL_SH 0x00000002 /* Share Status bit (1 - page are + shared by processes) */ +#define SH7750_PTEL_WT 0x00000001 /* Write-through bit, specifies the + cache write mode: + 0 - Copy-back mode + 1 - Write-through mode */ + +/* Page Table Entry Assistance register - PTEA */ +#define SH7750_PTEA_REGOFS 0x000034 /* offset */ +#define SH7750_PTEA SH7750_P4_REG32(SH7750_PTEA_REGOFS) +#define SH7750_PTEA_A7 SH7750_A7_REG32(SH7750_PTEA_REGOFS) +#define SH7750_PTEA_TC 0x00000008 /* Timing Control bit + 0 - use area 5 wait states + 1 - use area 6 wait states */ +#define SH7750_PTEA_SA 0x00000007 /* Space Attribute bits: */ +#define SH7750_PTEA_SA_UNDEF 0x00000000 /* 0 - undefined */ +#define SH7750_PTEA_SA_IOVAR 0x00000001 /* 1 - variable-size I/O space */ +#define SH7750_PTEA_SA_IO8 0x00000002 /* 2 - 8-bit I/O space */ +#define SH7750_PTEA_SA_IO16 0x00000003 /* 3 - 16-bit I/O space */ +#define SH7750_PTEA_SA_CMEM8 0x00000004 /* 4 - 8-bit common memory space */ +#define SH7750_PTEA_SA_CMEM16 0x00000005 /* 5 - 16-bit common memory space */ +#define SH7750_PTEA_SA_AMEM8 0x00000006 /* 6 - 8-bit attr memory space */ +#define SH7750_PTEA_SA_AMEM16 0x00000007 /* 7 - 16-bit attr memory space */ + + +/* Translation table base register */ +#define SH7750_TTB_REGOFS 0x000008 /* offset */ +#define SH7750_TTB SH7750_P4_REG32(SH7750_TTB_REGOFS) +#define SH7750_TTB_A7 SH7750_A7_REG32(SH7750_TTB_REGOFS) + +/* TLB exeption address register - TEA */ +#define SH7750_TEA_REGOFS 0x00000c /* offset */ +#define SH7750_TEA SH7750_P4_REG32(SH7750_TEA_REGOFS) +#define SH7750_TEA_A7 SH7750_A7_REG32(SH7750_TEA_REGOFS) + +/* MMU control register - MMUCR */ +#define SH7750_MMUCR_REGOFS 0x000010 /* offset */ +#define SH7750_MMUCR SH7750_P4_REG32(SH7750_MMUCR_REGOFS) +#define SH7750_MMUCR_A7 SH7750_A7_REG32(SH7750_MMUCR_REGOFS) +#define SH7750_MMUCR_AT 0x00000001 /* Address translation bit */ +#define SH7750_MMUCR_TI 0x00000004 /* TLB invalidate */ +#define SH7750_MMUCR_SV 0x00000100 /* Single Virtual Mode bit */ +#define SH7750_MMUCR_SQMD 0x00000200 /* Store Queue Mode bit */ +#define SH7750_MMUCR_URC 0x0000FC00 /* UTLB Replace Counter */ +#define SH7750_MMUCR_URC_S 10 +#define SH7750_MMUCR_URB 0x00FC0000 /* UTLB Replace Boundary */ +#define SH7750_MMUCR_URB_S 18 +#define SH7750_MMUCR_LRUI 0xFC000000 /* Least Recently Used ITLB */ +#define SH7750_MMUCR_LRUI_S 26 + + + + +/* + * Cache registers + * IC -- instructions cache + * OC -- operand cache + */ + +/* Cache Control Register - CCR */ +#define SH7750_CCR_REGOFS 0x00001c /* offset */ +#define SH7750_CCR SH7750_P4_REG32(SH7750_CCR_REGOFS) +#define SH7750_CCR_A7 SH7750_A7_REG32(SH7750_CCR_REGOFS) + +#define SH7750_CCR_IIX 0x00008000 /* IC index enable bit */ +#define SH7750_CCR_ICI 0x00000800 /* IC invalidation bit: + set it to clear IC */ +#define SH7750_CCR_ICE 0x00000100 /* IC enable bit */ +#define SH7750_CCR_OIX 0x00000080 /* OC index enable bit */ +#define SH7750_CCR_ORA 0x00000020 /* OC RAM enable bit + if you set OCE = 0, + you should set ORA = 0 */ +#define SH7750_CCR_OCI 0x00000008 /* OC invalidation bit */ +#define SH7750_CCR_CB 0x00000004 /* Copy-back bit for P1 area */ +#define SH7750_CCR_WT 0x00000002 /* Write-through bit for P0,U0,P3 area */ +#define SH7750_CCR_OCE 0x00000001 /* OC enable bit */ + +/* Queue address control register 0 - QACR0 */ +#define SH7750_QACR0_REGOFS 0x000038 /* offset */ +#define SH7750_QACR0 SH7750_P4_REG32(SH7750_QACR0_REGOFS) +#define SH7750_QACR0_A7 SH7750_A7_REG32(SH7750_QACR0_REGOFS) + +/* Queue address control register 1 - QACR1 */ +#define SH7750_QACR1_REGOFS 0x00003c /* offset */ +#define SH7750_QACR1 SH7750_P4_REG32(SH7750_QACR1_REGOFS) +#define SH7750_QACR1_A7 SH7750_A7_REG32(SH7750_QACR1_REGOFS) + + +/* + * Exeption-related registers + */ + +/* Immediate data for TRAPA instuction - TRA */ +#define SH7750_TRA_REGOFS 0x000020 /* offset */ +#define SH7750_TRA SH7750_P4_REG32(SH7750_TRA_REGOFS) +#define SH7750_TRA_A7 SH7750_A7_REG32(SH7750_TRA_REGOFS) + +#define SH7750_TRA_IMM 0x000003fd /* Immediate data operand */ +#define SH7750_TRA_IMM_S 2 + +/* Exeption event register - EXPEVT */ +#define SH7750_EXPEVT_REGOFS 0x000024 +#define SH7750_EXPEVT SH7750_P4_REG32(SH7750_EXPEVT_REGOFS) +#define SH7750_EXPEVT_A7 SH7750_A7_REG32(SH7750_EXPEVT_REGOFS) + +#define SH7750_EXPEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_EXPEVT_EX_S 0 + +/* Interrupt event register */ +#define SH7750_INTEVT_REGOFS 0x000028 +#define SH7750_INTEVT SH7750_P4_REG32(SH7750_INTEVT_REGOFS) +#define SH7750_INTEVT_A7 SH7750_A7_REG32(SH7750_INTEVT_REGOFS) +#define SH7750_INTEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_INTEVT_EX_S 0 + +/* + * Exception/interrupt codes + */ +#define SH7750_EVT_TO_NUM(evt) ((evt) >> 5) + +/* Reset exception category */ +#define SH7750_EVT_POWER_ON_RST 0x000 /* Power-on reset */ +#define SH7750_EVT_MANUAL_RST 0x020 /* Manual reset */ +#define SH7750_EVT_TLB_MULT_HIT 0x140 /* TLB multiple-hit exception */ + +/* General exception category */ +#define SH7750_EVT_USER_BREAK 0x1E0 /* User break */ +#define SH7750_EVT_IADDR_ERR 0x0E0 /* Instruction address error */ +#define SH7750_EVT_TLB_READ_MISS 0x040 /* ITLB miss exception / + DTLB miss exception (read) */ +#define SH7750_EVT_TLB_READ_PROTV 0x0A0 /* ITLB protection violation / + DTLB protection violation (read) */ +#define SH7750_EVT_ILLEGAL_INSTR 0x180 /* General Illegal Instruction + exception */ +#define SH7750_EVT_SLOT_ILLEGAL_INSTR 0x1A0 /* Slot Illegal Instruction + exception */ +#define SH7750_EVT_FPU_DISABLE 0x800 /* General FPU disable exception */ +#define SH7750_EVT_SLOT_FPU_DISABLE 0x820 /* Slot FPU disable exception */ +#define SH7750_EVT_DATA_READ_ERR 0x0E0 /* Data address error (read) */ +#define SH7750_EVT_DATA_WRITE_ERR 0x100 /* Data address error (write) */ +#define SH7750_EVT_DTLB_WRITE_MISS 0x060 /* DTLB miss exception (write) */ +#define SH7750_EVT_DTLB_WRITE_PROTV 0x0C0 /* DTLB protection violation + exception (write) */ +#define SH7750_EVT_FPU_EXCEPTION 0x120 /* FPU exception */ +#define SH7750_EVT_INITIAL_PGWRITE 0x080 /* Initial Page Write exception */ +#define SH7750_EVT_TRAPA 0x160 /* Unconditional trap (TRAPA) */ + +/* Interrupt exception category */ +#define SH7750_EVT_NMI 0x1C0 /* Non-maskable interrupt */ +#define SH7750_EVT_IRQ0 0x200 /* External Interrupt 0 */ +#define SH7750_EVT_IRQ1 0x220 /* External Interrupt 1 */ +#define SH7750_EVT_IRQ2 0x240 /* External Interrupt 2 */ +#define SH7750_EVT_IRQ3 0x260 /* External Interrupt 3 */ +#define SH7750_EVT_IRQ4 0x280 /* External Interrupt 4 */ +#define SH7750_EVT_IRQ5 0x2A0 /* External Interrupt 5 */ +#define SH7750_EVT_IRQ6 0x2C0 /* External Interrupt 6 */ +#define SH7750_EVT_IRQ7 0x2E0 /* External Interrupt 7 */ +#define SH7750_EVT_IRQ8 0x300 /* External Interrupt 8 */ +#define SH7750_EVT_IRQ9 0x320 /* External Interrupt 9 */ +#define SH7750_EVT_IRQA 0x340 /* External Interrupt A */ +#define SH7750_EVT_IRQB 0x360 /* External Interrupt B */ +#define SH7750_EVT_IRQC 0x380 /* External Interrupt C */ +#define SH7750_EVT_IRQD 0x3A0 /* External Interrupt D */ +#define SH7750_EVT_IRQE 0x3C0 /* External Interrupt E */ + +/* Peripheral Module Interrupts - Timer Unit (TMU) */ +#define SH7750_EVT_TUNI0 0x400 /* TMU Underflow Interrupt 0 */ +#define SH7750_EVT_TUNI1 0x420 /* TMU Underflow Interrupt 1 */ +#define SH7750_EVT_TUNI2 0x440 /* TMU Underflow Interrupt 2 */ +#define SH7750_EVT_TICPI2 0x460 /* TMU Input Capture Interrupt 2 */ + +/* Peripheral Module Interrupts - Real-Time Clock (RTC) */ +#define SH7750_EVT_RTC_ATI 0x480 /* Alarm Interrupt Request */ +#define SH7750_EVT_RTC_PRI 0x4A0 /* Periodic Interrupt Request */ +#define SH7750_EVT_RTC_CUI 0x4C0 /* Carry Interrupt Request */ + +/* Peripheral Module Interrupts - Serial Communication Interface (SCI) */ +#define SH7750_EVT_SCI_ERI 0x4E0 /* Receive Error */ +#define SH7750_EVT_SCI_RXI 0x500 /* Receive Data Register Full */ +#define SH7750_EVT_SCI_TXI 0x520 /* Transmit Data Register Empty */ +#define SH7750_EVT_SCI_TEI 0x540 /* Transmit End */ + +/* Peripheral Module Interrupts - Watchdog Timer (WDT) */ +#define SH7750_EVT_WDT_ITI 0x560 /* Interval Timer Interrupt + (used when WDT operates in + interval timer mode) */ + +/* Peripheral Module Interrupts - Memory Refresh Unit (REF) */ +#define SH7750_EVT_REF_RCMI 0x580 /* Compare-match Interrupt */ +#define SH7750_EVT_REF_ROVI 0x5A0 /* Refresh Counter Overflow + interrupt */ + +/* Peripheral Module Interrupts - Hitachi User Debug Interface (H-UDI) */ +#define SH7750_EVT_HUDI 0x600 /* UDI interrupt */ + +/* Peripheral Module Interrupts - General-Purpose I/O (GPIO) */ +#define SH7750_EVT_GPIO 0x620 /* GPIO Interrupt */ + +/* Peripheral Module Interrupts - DMA Controller (DMAC) */ +#define SH7750_EVT_DMAC_DMTE0 0x640 /* DMAC 0 Transfer End Interrupt */ +#define SH7750_EVT_DMAC_DMTE1 0x660 /* DMAC 1 Transfer End Interrupt */ +#define SH7750_EVT_DMAC_DMTE2 0x680 /* DMAC 2 Transfer End Interrupt */ +#define SH7750_EVT_DMAC_DMTE3 0x6A0 /* DMAC 3 Transfer End Interrupt */ +#define SH7750_EVT_DMAC_DMAE 0x6C0 /* DMAC Address Error Interrupt */ + +/* Peripheral Module Interrupts - Serial Communication Interface with FIFO */ +/* (SCIF) */ +#define SH7750_EVT_SCIF_ERI 0x700 /* Receive Error */ +#define SH7750_EVT_SCIF_RXI 0x720 /* Receive FIFO Data Full or + Receive Data ready interrupt */ +#define SH7750_EVT_SCIF_BRI 0x740 /* Break or overrun error */ +#define SH7750_EVT_SCIF_TXI 0x760 /* Transmit FIFO Data Empty */ + +/* + * Power Management + */ +#define SH7750_STBCR_REGOFS 0xC00004 /* offset */ +#define SH7750_STBCR SH7750_P4_REG32(SH7750_STBCR_REGOFS) +#define SH7750_STBCR_A7 SH7750_A7_REG32(SH7750_STBCR_REGOFS) + +#define SH7750_STBCR_STBY 0x80 /* Specifies a transition to standby mode: + 0 - Transition to SLEEP mode on SLEEP + 1 - Transition to STANDBY mode on SLEEP */ +#define SH7750_STBCR_PHZ 0x40 /* State of peripheral module pins in + standby mode: + 0 - normal state + 1 - high-impendance state */ + +#define SH7750_STBCR_PPU 0x20 /* Peripheral module pins pull-up controls */ +#define SH7750_STBCR_MSTP4 0x10 /* Stopping the clock supply to DMAC */ +#define SH7750_STBCR_DMAC_STP SH7750_STBCR_MSTP4 +#define SH7750_STBCR_MSTP3 0x08 /* Stopping the clock supply to SCIF */ +#define SH7750_STBCR_SCIF_STP SH7750_STBCR_MSTP3 +#define SH7750_STBCR_MSTP2 0x04 /* Stopping the clock supply to TMU */ +#define SH7750_STBCR_TMU_STP SH7750_STBCR_MSTP2 +#define SH7750_STBCR_MSTP1 0x02 /* Stopping the clock supply to RTC */ +#define SH7750_STBCR_RTC_STP SH7750_STBCR_MSTP1 +#define SH7750_STBCR_MSPT0 0x01 /* Stopping the clock supply to SCI */ +#define SH7750_STBCR_SCI_STP SH7750_STBCR_MSTP0 + +#define SH7750_STBCR_STBY 0x80 + + +#define SH7750_STBCR2_REGOFS 0xC00010 /* offset */ +#define SH7750_STBCR2 SH7750_P4_REG32(SH7750_STBCR2_REGOFS) +#define SH7750_STBCR2_A7 SH7750_A7_REG32(SH7750_STBCR2_REGOFS) + +#define SH7750_STBCR2_DSLP 0x80 /* Specifies transition to deep sleep mode: + 0 - transition to sleep or standby mode + as it is specified in STBY bit + 1 - transition to deep sleep mode on + execution of SLEEP instruction */ +#define SH7750_STBCR2_MSTP6 0x02 /* Stopping the clock supply to Store Queue + in the cache controller */ +#define SH7750_STBCR2_SQ_STP SH7750_STBCR2_MSTP6 +#define SH7750_STBCR2_MSTP5 0x01 /* Stopping the clock supply to the User + Break Controller (UBC) */ +#define SH7750_STBCR2_UBC_STP SH7750_STBCR2_MSTP5 + +/* + * Clock Pulse Generator (CPG) + */ +#define SH7750_FRQCR_REGOFS 0xC00000 /* offset */ +#define SH7750_FRQCR SH7750_P4_REG32(SH7750_FRQCR_REGOFS) +#define SH7750_FRQCR_A7 SH7750_A7_REG32(SH7750_FRQCR_REGOFS) + +#define SH7750_FRQCR_CKOEN 0x0800 /* Clock Output Enable + 0 - CKIO pin goes to HiZ/pullup + 1 - Clock is output from CKIO */ +#define SH7750_FRQCR_PLL1EN 0x0400 /* PLL circuit 1 enable */ +#define SH7750_FRQCR_PLL2EN 0x0200 /* PLL circuit 2 enable */ + +#define SH7750_FRQCR_IFC 0x01C0 /* CPU clock frequency division ratio: */ +#define SH7750_FRQCR_IFCDIV1 0x0000 /* 0 - * 1 */ +#define SH7750_FRQCR_IFCDIV2 0x0040 /* 1 - * 1/2 */ +#define SH7750_FRQCR_IFCDIV3 0x0080 /* 2 - * 1/3 */ +#define SH7750_FRQCR_IFCDIV4 0x00C0 /* 3 - * 1/4 */ +#define SH7750_FRQCR_IFCDIV6 0x0100 /* 4 - * 1/6 */ +#define SH7750_FRQCR_IFCDIV8 0x0140 /* 5 - * 1/8 */ + +#define SH7750_FRQCR_BFC 0x0038 /* Bus clock frequency division ratio: */ +#define SH7750_FRQCR_BFCDIV1 0x0000 /* 0 - * 1 */ +#define SH7750_FRQCR_BFCDIV2 0x0008 /* 1 - * 1/2 */ +#define SH7750_FRQCR_BFCDIV3 0x0010 /* 2 - * 1/3 */ +#define SH7750_FRQCR_BFCDIV4 0x0018 /* 3 - * 1/4 */ +#define SH7750_FRQCR_BFCDIV6 0x0020 /* 4 - * 1/6 */ +#define SH7750_FRQCR_BFCDIV8 0x0028 /* 5 - * 1/8 */ + +#define SH7750_FRQCR_PFC 0x0007 /* Peripheral module clock frequency + division ratio: */ +#define SH7750_FRQCR_PFCDIV2 0x0000 /* 0 - * 1/2 */ +#define SH7750_FRQCR_PFCDIV3 0x0001 /* 1 - * 1/3 */ +#define SH7750_FRQCR_PFCDIV4 0x0002 /* 2 - * 1/4 */ +#define SH7750_FRQCR_PFCDIV6 0x0003 /* 3 - * 1/6 */ +#define SH7750_FRQCR_PFCDIV8 0x0004 /* 4 - * 1/8 */ + +/* + * Watchdog Timer (WDT) + */ + +/* Watchdog Timer Counter register - WTCNT */ +#define SH7750_WTCNT_REGOFS 0xC00008 /* offset */ +#define SH7750_WTCNT SH7750_P4_REG32(SH7750_WTCNT_REGOFS) +#define SH7750_WTCNT_A7 SH7750_A7_REG32(SH7750_WTCNT_REGOFS) +#define SH7750_WTCNT_KEY 0x5A00 /* When WTCNT byte register written, + you have to set the upper byte to + 0x5A */ + +/* Watchdog Timer Control/Status register - WTCSR */ +#define SH7750_WTCSR_REGOFS 0xC0000C /* offset */ +#define SH7750_WTCSR SH7750_P4_REG32(SH7750_WTCSR_REGOFS) +#define SH7750_WTCSR_A7 SH7750_A7_REG32(SH7750_WTCSR_REGOFS) +#define SH7750_WTCSR_KEY 0xA500 /* When WTCSR byte register written, + you have to set the upper byte to + 0xA5 */ +#define SH7750_WTCSR_TME 0x80 /* Timer enable (1-upcount start) */ +#define SH7750_WTCSR_MODE 0x40 /* Timer Mode Select: */ +#define SH7750_WTCSR_MODE_WT 0x40 /* Watchdog Timer Mode */ +#define SH7750_WTCSR_MODE_IT 0x00 /* Interval Timer Mode */ +#define SH7750_WTCSR_RSTS 0x20 /* Reset Select: */ +#define SH7750_WTCSR_RST_MAN 0x20 /* Manual Reset */ +#define SH7750_WTCSR_RST_PWR 0x00 /* Power-on Reset */ +#define SH7750_WTCSR_WOVF 0x10 /* Watchdog Timer Overflow Flag */ +#define SH7750_WTCSR_IOVF 0x08 /* Interval Timer Overflow Flag */ +#define SH7750_WTCSR_CKS 0x07 /* Clock Select: */ +#define SH7750_WTCSR_CKS_DIV32 0x00 /* 1/32 of frequency divider 2 input */ +#define SH7750_WTCSR_CKS_DIV64 0x01 /* 1/64 */ +#define SH7750_WTCSR_CKS_DIV128 0x02 /* 1/128 */ +#define SH7750_WTCSR_CKS_DIV256 0x03 /* 1/256 */ +#define SH7750_WTCSR_CKS_DIV512 0x04 /* 1/512 */ +#define SH7750_WTCSR_CKS_DIV1024 0x05 /* 1/1024 */ +#define SH7750_WTCSR_CKS_DIV2048 0x06 /* 1/2048 */ +#define SH7750_WTCSR_CKS_DIV4096 0x07 /* 1/4096 */ + +/* + * Real-Time Clock (RTC) + */ +/* 64-Hz Counter Register (byte, read-only) - R64CNT */ +#define SH7750_R64CNT_REGOFS 0xC80000 /* offset */ +#define SH7750_R64CNT SH7750_P4_REG32(SH7750_R64CNT_REGOFS) +#define SH7750_R64CNT_A7 SH7750_A7_REG32(SH7750_R64CNT_REGOFS) + +/* Second Counter Register (byte, BCD-coded) - RSECCNT */ +#define SH7750_RSECCNT_REGOFS 0xC80004 /* offset */ +#define SH7750_RSECCNT SH7750_P4_REG32(SH7750_RSECCNT_REGOFS) +#define SH7750_RSECCNT_A7 SH7750_A7_REG32(SH7750_RSECCNT_REGOFS) + +/* Minute Counter Register (byte, BCD-coded) - RMINCNT */ +#define SH7750_RMINCNT_REGOFS 0xC80008 /* offset */ +#define SH7750_RMINCNT SH7750_P4_REG32(SH7750_RMINCNT_REGOFS) +#define SH7750_RMINCNT_A7 SH7750_A7_REG32(SH7750_RMINCNT_REGOFS) + +/* Hour Counter Register (byte, BCD-coded) - RHRCNT */ +#define SH7750_RHRCNT_REGOFS 0xC8000C /* offset */ +#define SH7750_RHRCNT SH7750_P4_REG32(SH7750_RHRCNT_REGOFS) +#define SH7750_RHRCNT_A7 SH7750_A7_REG32(SH7750_RHRCNT_REGOFS) + +/* Day-of-Week Counter Register (byte) - RWKCNT */ +#define SH7750_RWKCNT_REGOFS 0xC80010 /* offset */ +#define SH7750_RWKCNT SH7750_P4_REG32(SH7750_RWKCNT_REGOFS) +#define SH7750_RWKCNT_A7 SH7750_A7_REG32(SH7750_RWKCNT_REGOFS) + +#define SH7750_RWKCNT_SUN 0 /* Sunday */ +#define SH7750_RWKCNT_MON 1 /* Monday */ +#define SH7750_RWKCNT_TUE 2 /* Tuesday */ +#define SH7750_RWKCNT_WED 3 /* Wednesday */ +#define SH7750_RWKCNT_THU 4 /* Thursday */ +#define SH7750_RWKCNT_FRI 5 /* Friday */ +#define SH7750_RWKCNT_SAT 6 /* Saturday */ + +/* Day Counter Register (byte, BCD-coded) - RDAYCNT */ +#define SH7750_RDAYCNT_REGOFS 0xC80014 /* offset */ +#define SH7750_RDAYCNT SH7750_P4_REG32(SH7750_RDAYCNT_REGOFS) +#define SH7750_RDAYCNT_A7 SH7750_A7_REG32(SH7750_RDAYCNT_REGOFS) + +/* Month Counter Register (byte, BCD-coded) - RMONCNT */ +#define SH7750_RMONCNT_REGOFS 0xC80018 /* offset */ +#define SH7750_RMONCNT SH7750_P4_REG32(SH7750_RMONCNT_REGOFS) +#define SH7750_RMONCNT_A7 SH7750_A7_REG32(SH7750_RMONCNT_REGOFS) + +/* Year Counter Register (half, BCD-coded) - RYRCNT */ +#define SH7750_RYRCNT_REGOFS 0xC8001C /* offset */ +#define SH7750_RYRCNT SH7750_P4_REG32(SH7750_RYRCNT_REGOFS) +#define SH7750_RYRCNT_A7 SH7750_A7_REG32(SH7750_RYRCNT_REGOFS) + +/* Second Alarm Register (byte, BCD-coded) - RSECAR */ +#define SH7750_RSECAR_REGOFS 0xC80020 /* offset */ +#define SH7750_RSECAR SH7750_P4_REG32(SH7750_RSECAR_REGOFS) +#define SH7750_RSECAR_A7 SH7750_A7_REG32(SH7750_RSECAR_REGOFS) +#define SH7750_RSECAR_ENB 0x80 /* Second Alarm Enable */ + +/* Minute Alarm Register (byte, BCD-coded) - RMINAR */ +#define SH7750_RMINAR_REGOFS 0xC80024 /* offset */ +#define SH7750_RMINAR SH7750_P4_REG32(SH7750_RMINAR_REGOFS) +#define SH7750_RMINAR_A7 SH7750_A7_REG32(SH7750_RMINAR_REGOFS) +#define SH7750_RMINAR_ENB 0x80 /* Minute Alarm Enable */ + +/* Hour Alarm Register (byte, BCD-coded) - RHRAR */ +#define SH7750_RHRAR_REGOFS 0xC80028 /* offset */ +#define SH7750_RHRAR SH7750_P4_REG32(SH7750_RHRAR_REGOFS) +#define SH7750_RHRAR_A7 SH7750_A7_REG32(SH7750_RHRAR_REGOFS) +#define SH7750_RHRAR_ENB 0x80 /* Hour Alarm Enable */ + +/* Day-of-Week Alarm Register (byte) - RWKAR */ +#define SH7750_RWKAR_REGOFS 0xC8002C /* offset */ +#define SH7750_RWKAR SH7750_P4_REG32(SH7750_RWKAR_REGOFS) +#define SH7750_RWKAR_A7 SH7750_A7_REG32(SH7750_RWKAR_REGOFS) +#define SH7750_RWKAR_ENB 0x80 /* Day-of-week Alarm Enable */ + +#define SH7750_RWKAR_SUN 0 /* Sunday */ +#define SH7750_RWKAR_MON 1 /* Monday */ +#define SH7750_RWKAR_TUE 2 /* Tuesday */ +#define SH7750_RWKAR_WED 3 /* Wednesday */ +#define SH7750_RWKAR_THU 4 /* Thursday */ +#define SH7750_RWKAR_FRI 5 /* Friday */ +#define SH7750_RWKAR_SAT 6 /* Saturday */ + +/* Day Alarm Register (byte, BCD-coded) - RDAYAR */ +#define SH7750_RDAYAR_REGOFS 0xC80030 /* offset */ +#define SH7750_RDAYAR SH7750_P4_REG32(SH7750_RDAYAR_REGOFS) +#define SH7750_RDAYAR_A7 SH7750_A7_REG32(SH7750_RDAYAR_REGOFS) +#define SH7750_RDAYAR_ENB 0x80 /* Day Alarm Enable */ + +/* Month Counter Register (byte, BCD-coded) - RMONAR */ +#define SH7750_RMONAR_REGOFS 0xC80034 /* offset */ +#define SH7750_RMONAR SH7750_P4_REG32(SH7750_RMONAR_REGOFS) +#define SH7750_RMONAR_A7 SH7750_A7_REG32(SH7750_RMONAR_REGOFS) +#define SH7750_RMONAR_ENB 0x80 /* Month Alarm Enable */ + +/* RTC Control Register 1 (byte) - RCR1 */ +#define SH7750_RCR1_REGOFS 0xC80038 /* offset */ +#define SH7750_RCR1 SH7750_P4_REG32(SH7750_RCR1_REGOFS) +#define SH7750_RCR1_A7 SH7750_A7_REG32(SH7750_RCR1_REGOFS) +#define SH7750_RCR1_CF 0x80 /* Carry Flag */ +#define SH7750_RCR1_CIE 0x10 /* Carry Interrupt Enable */ +#define SH7750_RCR1_AIE 0x08 /* Alarm Interrupt Enable */ +#define SH7750_RCR1_AF 0x01 /* Alarm Flag */ + +/* RTC Control Register 2 (byte) - RCR2 */ +#define SH7750_RCR2_REGOFS 0xC8003C /* offset */ +#define SH7750_RCR2 SH7750_P4_REG32(SH7750_RCR2_REGOFS) +#define SH7750_RCR2_A7 SH7750_A7_REG32(SH7750_RCR2_REGOFS) +#define SH7750_RCR2_PEF 0x80 /* Periodic Interrupt Flag */ +#define SH7750_RCR2_PES 0x70 /* Periodic Interrupt Enable: */ +#define SH7750_RCR2_PES_DIS 0x00 /* Periodic Interrupt Disabled */ +#define SH7750_RCR2_PES_DIV256 0x10 /* Generated at 1/256 sec interval */ +#define SH7750_RCR2_PES_DIV64 0x20 /* Generated at 1/64 sec interval */ +#define SH7750_RCR2_PES_DIV16 0x30 /* Generated at 1/16 sec interval */ +#define SH7750_RCR2_PES_DIV4 0x40 /* Generated at 1/4 sec interval */ +#define SH7750_RCR2_PES_DIV2 0x50 /* Generated at 1/2 sec interval */ +#define SH7750_RCR2_PES_x1 0x60 /* Generated at 1 sec interval */ +#define SH7750_RCR2_PES_x2 0x70 /* Generated at 2 sec interval */ +#define SH7750_RCR2_RTCEN 0x08 /* RTC Crystal Oscillator is Operated */ +#define SH7750_RCR2_ADJ 0x04 /* 30-Second Adjastment */ +#define SH7750_RCR2_RESET 0x02 /* Frequency divider circuits are reset */ +#define SH7750_RCR2_START 0x01 /* 0 - sec, min, hr, day-of-week, month, + year counters are stopped + 1 - sec, min, hr, day-of-week, month, + year counters operate normally */ + + +/* + * Timer Unit (TMU) + */ +/* Timer Output Control Register (byte) - TOCR */ +#define SH7750_TOCR_REGOFS 0xD80000 /* offset */ +#define SH7750_TOCR SH7750_P4_REG32(SH7750_TOCR_REGOFS) +#define SH7750_TOCR_A7 SH7750_A7_REG32(SH7750_TOCR_REGOFS) +#define SH7750_TOCR_TCOE 0x01 /* Timer Clock Pin Control: + 0 - TCLK is used as external clock + input or input capture control + 1 - TCLK is used as on-chip RTC + output clock pin */ + +/* Timer Start Register (byte) - TSTR */ +#define SH7750_TSTR_REGOFS 0xD80004 /* offset */ +#define SH7750_TSTR SH7750_P4_REG32(SH7750_TSTR_REGOFS) +#define SH7750_TSTR_A7 SH7750_A7_REG32(SH7750_TSTR_REGOFS) +#define SH7750_TSTR_STR2 0x04 /* TCNT2 performs count operations */ +#define SH7750_TSTR_STR1 0x02 /* TCNT1 performs count operations */ +#define SH7750_TSTR_STR0 0x01 /* TCNT0 performs count operations */ +#define SH7750_TSTR_STR(n) (1 << (n)) + +/* Timer Constant Register - TCOR0, TCOR1, TCOR2 */ +#define SH7750_TCOR_REGOFS(n) (0xD80008 + ((n)*12)) /* offset */ +#define SH7750_TCOR(n) SH7750_P4_REG32(SH7750_TCOR_REGOFS(n)) +#define SH7750_TCOR_A7(n) SH7750_A7_REG32(SH7750_TCOR_REGOFS(n)) +#define SH7750_TCOR0 SH7750_TCOR(0) +#define SH7750_TCOR1 SH7750_TCOR(1) +#define SH7750_TCOR2 SH7750_TCOR(2) +#define SH7750_TCOR0_A7 SH7750_TCOR_A7(0) +#define SH7750_TCOR1_A7 SH7750_TCOR_A7(1) +#define SH7750_TCOR2_A7 SH7750_TCOR_A7(2) + +/* Timer Counter Register - TCNT0, TCNT1, TCNT2 */ +#define SH7750_TCNT_REGOFS(n) (0xD8000C + ((n)*12)) /* offset */ +#define SH7750_TCNT(n) SH7750_P4_REG32(SH7750_TCNT_REGOFS(n)) +#define SH7750_TCNT_A7(n) SH7750_A7_REG32(SH7750_TCNT_REGOFS(n)) +#define SH7750_TCNT0 SH7750_TCNT(0) +#define SH7750_TCNT1 SH7750_TCNT(1) +#define SH7750_TCNT2 SH7750_TCNT(2) +#define SH7750_TCNT0_A7 SH7750_TCNT_A7(0) +#define SH7750_TCNT1_A7 SH7750_TCNT_A7(1) +#define SH7750_TCNT2_A7 SH7750_TCNT_A7(2) + +/* Timer Control Register (half) - TCR0, TCR1, TCR2 */ +#define SH7750_TCR_REGOFS(n) (0xD80010 + ((n)*12)) /* offset */ +#define SH7750_TCR(n) SH7750_P4_REG32(SH7750_TCR_REGOFS(n)) +#define SH7750_TCR_A7(n) SH7750_A7_REG32(SH7750_TCR_REGOFS(n)) +#define SH7750_TCR0 SH7750_TCR(0) +#define SH7750_TCR1 SH7750_TCR(1) +#define SH7750_TCR2 SH7750_TCR(2) +#define SH7750_TCR0_A7 SH7750_TCR_A7(0) +#define SH7750_TCR1_A7 SH7750_TCR_A7(1) +#define SH7750_TCR2_A7 SH7750_TCR_A7(2) + +#define SH7750_TCR2_ICPF 0x200 /* Input Capture Interrupt Flag + (1 - input capture has occured) */ +#define SH7750_TCR_UNF 0x100 /* Underflow flag */ +#define SH7750_TCR2_ICPE 0x0C0 /* Input Capture Control: */ +#define SH7750_TCR2_ICPE_DIS 0x000 /* Input Capture function is not used */ +#define SH7750_TCR2_ICPE_NOINT 0x080 /* Input Capture function is used, but + input capture interrupt is not + enabled */ +#define SH7750_TCR2_ICPE_INT 0x0C0 /* Input Capture function is used, + input capture interrupt enabled */ +#define SH7750_TCR_UNIE 0x020 /* Underflow Interrupt Control + (1 - underflow interrupt enabled) */ +#define SH7750_TCR_CKEG 0x018 /* Clock Edge selection: */ +#define SH7750_TCR_CKEG_RAISE 0x000 /* Count/capture on rising edge */ +#define SH7750_TCR_CKEG_FALL 0x008 /* Count/capture on falling edge */ +#define SH7750_TCR_CKEG_BOTH 0x018 /* Count/capture on both rising and + falling edges */ +#define SH7750_TCR_TPSC 0x007 /* Timer prescaler */ +#define SH7750_TCR_TPSC_DIV4 0x000 /* Counts on peripheral clock/4 */ +#define SH7750_TCR_TPSC_DIV16 0x001 /* Counts on peripheral clock/16 */ +#define SH7750_TCR_TPSC_DIV64 0x002 /* Counts on peripheral clock/64 */ +#define SH7750_TCR_TPSC_DIV256 0x003 /* Counts on peripheral clock/256 */ +#define SH7750_TCR_TPSC_DIV1024 0x004 /* Counts on peripheral clock/1024 */ +#define SH7750_TCR_TPSC_RTC 0x006 /* Counts on on-chip RTC output clk */ +#define SH7750_TCR_TPSC_EXT 0x007 /* Counts on external clock */ + +/* Input Capture Register (read-only) - TCPR2 */ +#define SH7750_TCPR2_REGOFS 0xD8002C /* offset */ +#define SH7750_TCPR2 SH7750_P4_REG32(SH7750_TCPR2_REGOFS) +#define SH7750_TCPR2_A7 SH7750_A7_REG32(SH7750_TCPR2_REGOFS) + +/* + * Bus State Controller - BSC + */ +/* Bus Control Register 1 - BCR1 */ +#define SH7750_BCR1_REGOFS 0x800000 /* offset */ +#define SH7750_BCR1 SH7750_P4_REG32(SH7750_BCR1_REGOFS) +#define SH7750_BCR1_A7 SH7750_A7_REG32(SH7750_BCR1_REGOFS) +#define SH7750_BCR1_ENDIAN 0x80000000 /* Endianness (1 - little endian) */ +#define SH7750_BCR1_MASTER 0x40000000 /* Master/Slave mode (1-master) */ +#define SH7750_BCR1_A0MPX 0x20000000 /* Area 0 Memory Type (0-SRAM,1-MPX) */ +#define SH7750_BCR1_IPUP 0x02000000 /* Input Pin Pull-up Control: + 0 - pull-up resistor is on for + control input pins + 1 - pull-up resistor is off */ +#define SH7750_BCR1_OPUP 0x01000000 /* Output Pin Pull-up Control: + 0 - pull-up resistor is on for + control output pins + 1 - pull-up resistor is off */ +#define SH7750_BCR1_A1MBC 0x00200000 /* Area 1 SRAM Byte Control Mode: + 0 - Area 1 SRAM is set to + normal mode + 1 - Area 1 SRAM is set to byte + control mode */ +#define SH7750_BCR1_A4MBC 0x00100000 /* Area 4 SRAM Byte Control Mode: + 0 - Area 4 SRAM is set to + normal mode + 1 - Area 4 SRAM is set to byte + control mode */ +#define SH7750_BCR1_BREQEN 0x00080000 /* BREQ Enable: + 0 - External requests are not + accepted + 1 - External requests are + accepted */ +#define SH7750_BCR1_PSHR 0x00040000 /* Partial Sharing Bit: + 0 - Master Mode + 1 - Partial-sharing Mode */ +#define SH7750_BCR1_MEMMPX 0x00020000 /* Area 1 to 6 MPX Interface: + 0 - SRAM/burst ROM interface + 1 - MPX interface */ +#define SH7750_BCR1_HIZMEM 0x00008000 /* High Impendance Control. Specifies + the state of A[25:0], BS\, CSn\, + RD/WR\, CE2A\, CE2B\ in standby + mode and when bus is released: + 0 - signals go to High-Z mode + 1 - signals driven */ +#define SH7750_BCR1_HIZCNT 0x00004000 /* High Impendance Control. Specifies + the state of the RAS\, RAS2\, WEn\, + CASn\, DQMn, RD\, CASS\, FRAME\, + RD2\ signals in standby mode and + when bus is released: + 0 - signals go to High-Z mode + 1 - signals driven */ +#define SH7750_BCR1_A0BST 0x00003800 /* Area 0 Burst ROM Control */ +#define SH7750_BCR1_A0BST_SRAM 0x0000 /* Area 0 accessed as SRAM i/f */ +#define SH7750_BCR1_A0BST_ROM4 0x0800 /* Area 0 accessed as burst ROM + interface, 4 cosequtive access */ +#define SH7750_BCR1_A0BST_ROM8 0x1000 /* Area 0 accessed as burst ROM + interface, 8 cosequtive access */ +#define SH7750_BCR1_A0BST_ROM16 0x1800 /* Area 0 accessed as burst ROM + interface, 16 cosequtive access */ +#define SH7750_BCR1_A0BST_ROM32 0x2000 /* Area 0 accessed as burst ROM + interface, 32 cosequtive access */ + +#define SH7750_BCR1_A5BST 0x00000700 /* Area 5 Burst ROM Control */ +#define SH7750_BCR1_A5BST_SRAM 0x0000 /* Area 5 accessed as SRAM i/f */ +#define SH7750_BCR1_A5BST_ROM4 0x0100 /* Area 5 accessed as burst ROM + interface, 4 cosequtive access */ +#define SH7750_BCR1_A5BST_ROM8 0x0200 /* Area 5 accessed as burst ROM + interface, 8 cosequtive access */ +#define SH7750_BCR1_A5BST_ROM16 0x0300 /* Area 5 accessed as burst ROM + interface, 16 cosequtive access */ +#define SH7750_BCR1_A5BST_ROM32 0x0400 /* Area 5 accessed as burst ROM + interface, 32 cosequtive access */ + +#define SH7750_BCR1_A6BST 0x000000E0 /* Area 6 Burst ROM Control */ +#define SH7750_BCR1_A6BST_SRAM 0x0000 /* Area 6 accessed as SRAM i/f */ +#define SH7750_BCR1_A6BST_ROM4 0x0020 /* Area 6 accessed as burst ROM + interface, 4 cosequtive access */ +#define SH7750_BCR1_A6BST_ROM8 0x0040 /* Area 6 accessed as burst ROM + interface, 8 cosequtive access */ +#define SH7750_BCR1_A6BST_ROM16 0x0060 /* Area 6 accessed as burst ROM + interface, 16 cosequtive access */ +#define SH7750_BCR1_A6BST_ROM32 0x0080 /* Area 6 accessed as burst ROM + interface, 32 cosequtive access */ + +#define SH7750_BCR1_DRAMTP 0x001C /* Area 2 and 3 Memory Type */ +#define SH7750_BCR1_DRAMTP_2SRAM_3SRAM 0x0000 /* Area 2 and 3 are SRAM or MPX + interface. */ +#define SH7750_BCR1_DRAMTP_2SRAM_3SDRAM 0x0008 /* Area 2 - SRAM/MPX, Area 3 - + synchronous DRAM */ +#define SH7750_BCR1_DRAMTP_2SDRAM_3SDRAM 0x000C /* Area 2 and 3 are synchronous + DRAM interface */ +#define SH7750_BCR1_DRAMTP_2SRAM_3DRAM 0x0010 /* Area 2 - SRAM/MPX, Area 3 - + DRAM interface */ +#define SH7750_BCR1_DRAMTP_2DRAM_3DRAM 0x0014 /* Area 2 and 3 are DRAM + interface */ + +#define SH7750_BCR1_A56PCM 0x00000001 /* Area 5 and 6 Bus Type: + 0 - SRAM interface + 1 - PCMCIA interface */ + +/* Bus Control Register 2 (half) - BCR2 */ +#define SH7750_BCR2_REGOFS 0x800004 /* offset */ +#define SH7750_BCR2 SH7750_P4_REG32(SH7750_BCR2_REGOFS) +#define SH7750_BCR2_A7 SH7750_A7_REG32(SH7750_BCR2_REGOFS) + +#define SH7750_BCR2_A0SZ 0xC000 /* Area 0 Bus Width */ +#define SH7750_BCR2_A0SZ_S 14 +#define SH7750_BCR2_A6SZ 0x3000 /* Area 6 Bus Width */ +#define SH7750_BCR2_A6SZ_S 12 +#define SH7750_BCR2_A5SZ 0x0C00 /* Area 5 Bus Width */ +#define SH7750_BCR2_A5SZ_S 10 +#define SH7750_BCR2_A4SZ 0x0300 /* Area 4 Bus Width */ +#define SH7750_BCR2_A4SZ_S 8 +#define SH7750_BCR2_A3SZ 0x00C0 /* Area 3 Bus Width */ +#define SH7750_BCR2_A3SZ_S 6 +#define SH7750_BCR2_A2SZ 0x0030 /* Area 2 Bus Width */ +#define SH7750_BCR2_A2SZ_S 4 +#define SH7750_BCR2_A1SZ 0x000C /* Area 1 Bus Width */ +#define SH7750_BCR2_A1SZ_S 2 +#define SH7750_BCR2_SZ_64 0 /* 64 bits */ +#define SH7750_BCR2_SZ_8 1 /* 8 bits */ +#define SH7750_BCR2_SZ_16 2 /* 16 bits */ +#define SH7750_BCR2_SZ_32 3 /* 32 bits */ +#define SH7750_BCR2_PORTEN 0x0001 /* Port Function Enable : + 0 - D51-D32 are not used as a port + 1 - D51-D32 are used as a port */ + +/* Wait Control Register 1 - WCR1 */ +#define SH7750_WCR1_REGOFS 0x800008 /* offset */ +#define SH7750_WCR1 SH7750_P4_REG32(SH7750_WCR1_REGOFS) +#define SH7750_WCR1_A7 SH7750_A7_REG32(SH7750_WCR1_REGOFS) +#define SH7750_WCR1_DMAIW 0x70000000 /* DACK Device Inter-Cycle Idle + specification */ +#define SH7750_WCR1_DMAIW_S 28 +#define SH7750_WCR1_A6IW 0x07000000 /* Area 6 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A6IW_S 24 +#define SH7750_WCR1_A5IW 0x00700000 /* Area 5 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A5IW_S 20 +#define SH7750_WCR1_A4IW 0x00070000 /* Area 4 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A4IW_S 16 +#define SH7750_WCR1_A3IW 0x00007000 /* Area 3 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A3IW_S 12 +#define SH7750_WCR1_A2IW 0x00000700 /* Area 2 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A2IW_S 8 +#define SH7750_WCR1_A1IW 0x00000070 /* Area 1 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A1IW_S 4 +#define SH7750_WCR1_A0IW 0x00000007 /* Area 0 Inter-Cycle Idle spec. */ +#define SH7750_WCR1_A0IW_S 0 + +/* Wait Control Register 2 - WCR2 */ +#define SH7750_WCR2_REGOFS 0x80000C /* offset */ +#define SH7750_WCR2 SH7750_P4_REG32(SH7750_WCR2_REGOFS) +#define SH7750_WCR2_A7 SH7750_A7_REG32(SH7750_WCR2_REGOFS) + +#define SH7750_WCR2_A6W 0xE0000000 /* Area 6 Wait Control */ +#define SH7750_WCR2_A6W_S 29 +#define SH7750_WCR2_A6B 0x1C000000 /* Area 6 Burst Pitch */ +#define SH7750_WCR2_A6B_S 26 +#define SH7750_WCR2_A5W 0x03800000 /* Area 5 Wait Control */ +#define SH7750_WCR2_A5W_S 23 +#define SH7750_WCR2_A5B 0x00700000 /* Area 5 Burst Pitch */ +#define SH7750_WCR2_A5B_S 20 +#define SH7750_WCR2_A4W 0x000E0000 /* Area 4 Wait Control */ +#define SH7750_WCR2_A4W_S 17 +#define SH7750_WCR2_A3W 0x0000E000 /* Area 3 Wait Control */ +#define SH7750_WCR2_A3W_S 13 +#define SH7750_WCR2_A2W 0x00000E00 /* Area 2 Wait Control */ +#define SH7750_WCR2_A2W_S 9 +#define SH7750_WCR2_A1W 0x000001C0 /* Area 1 Wait Control */ +#define SH7750_WCR2_A1W_S 6 +#define SH7750_WCR2_A0W 0x00000038 /* Area 0 Wait Control */ +#define SH7750_WCR2_A0W_S 3 +#define SH7750_WCR2_A0B 0x00000007 /* Area 0 Burst Pitch */ +#define SH7750_WCR2_A0B_S 0 + +#define SH7750_WCR2_WS0 0 /* 0 wait states inserted */ +#define SH7750_WCR2_WS1 1 /* 1 wait states inserted */ +#define SH7750_WCR2_WS2 2 /* 2 wait states inserted */ +#define SH7750_WCR2_WS3 3 /* 3 wait states inserted */ +#define SH7750_WCR2_WS6 4 /* 6 wait states inserted */ +#define SH7750_WCR2_WS9 5 /* 9 wait states inserted */ +#define SH7750_WCR2_WS12 6 /* 12 wait states inserted */ +#define SH7750_WCR2_WS15 7 /* 15 wait states inserted */ + +#define SH7750_WCR2_BPWS0 0 /* 0 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS1 1 /* 1 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS2 2 /* 2 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS3 3 /* 3 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS4 4 /* 4 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS5 5 /* 5 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS6 6 /* 6 wait states inserted from 2nd access */ +#define SH7750_WCR2_BPWS7 7 /* 7 wait states inserted from 2nd access */ + +/* DRAM CAS\ Assertion Delay (area 3,2) */ +#define SH7750_WCR2_DRAM_CAS_ASW1 0 /* 1 cycle */ +#define SH7750_WCR2_DRAM_CAS_ASW2 1 /* 2 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW3 2 /* 3 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW4 3 /* 4 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW7 4 /* 7 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW10 5 /* 10 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW13 6 /* 13 cycles */ +#define SH7750_WCR2_DRAM_CAS_ASW16 7 /* 16 cycles */ + +/* SDRAM CAS\ Latency Cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT1 1 /* 1 cycle */ +#define SH7750_WCR2_SDRAM_CAS_LAT2 2 /* 2 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT3 3 /* 3 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT4 4 /* 4 cycles */ +#define SH7750_WCR2_SDRAM_CAS_LAT5 5 /* 5 cycles */ + +/* Wait Control Register 3 - WCR3 */ +#define SH7750_WCR3_REGOFS 0x800010 /* offset */ +#define SH7750_WCR3 SH7750_P4_REG32(SH7750_WCR3_REGOFS) +#define SH7750_WCR3_A7 SH7750_A7_REG32(SH7750_WCR3_REGOFS) + +#define SH7750_WCR3_A6S 0x04000000 /* Area 6 Write Strobe Setup time */ +#define SH7750_WCR3_A6H 0x03000000 /* Area 6 Data Hold Time */ +#define SH7750_WCR3_A6H_S 24 +#define SH7750_WCR3_A5S 0x00400000 /* Area 5 Write Strobe Setup time */ +#define SH7750_WCR3_A5H 0x00300000 /* Area 5 Data Hold Time */ +#define SH7750_WCR3_A5H_S 20 +#define SH7750_WCR3_A4S 0x00040000 /* Area 4 Write Strobe Setup time */ +#define SH7750_WCR3_A4H 0x00030000 /* Area 4 Data Hold Time */ +#define SH7750_WCR3_A4H_S 16 +#define SH7750_WCR3_A3S 0x00004000 /* Area 3 Write Strobe Setup time */ +#define SH7750_WCR3_A3H 0x00003000 /* Area 3 Data Hold Time */ +#define SH7750_WCR3_A3H_S 12 +#define SH7750_WCR3_A2S 0x00000400 /* Area 2 Write Strobe Setup time */ +#define SH7750_WCR3_A2H 0x00000300 /* Area 2 Data Hold Time */ +#define SH7750_WCR3_A2H_S 8 +#define SH7750_WCR3_A1S 0x00000040 /* Area 1 Write Strobe Setup time */ +#define SH7750_WCR3_A1H 0x00000030 /* Area 1 Data Hold Time */ +#define SH7750_WCR3_A1H_S 4 +#define SH7750_WCR3_A0S 0x00000004 /* Area 0 Write Strobe Setup time */ +#define SH7750_WCR3_A0H 0x00000003 /* Area 0 Data Hold Time */ +#define SH7750_WCR3_A0H_S 0 + +#define SH7750_WCR3_DHWS_0 0 /* 0 wait states data hold time */ +#define SH7750_WCR3_DHWS_1 1 /* 1 wait states data hold time */ +#define SH7750_WCR3_DHWS_2 2 /* 2 wait states data hold time */ +#define SH7750_WCR3_DHWS_3 3 /* 3 wait states data hold time */ + +#define SH7750_MCR_REGOFS 0x800014 /* offset */ +#define SH7750_MCR SH7750_P4_REG32(SH7750_MCR_REGOFS) +#define SH7750_MCR_A7 SH7750_A7_REG32(SH7750_MCR_REGOFS) + +#define SH7750_MCR_RASD 0x80000000 /* RAS Down mode */ +#define SH7750_MCR_MRSET 0x40000000 /* SDRAM Mode Register Set */ +#define SH7750_MCR_PALL 0x00000000 /* SDRAM Precharge All cmd. Mode */ +#define SH7750_MCR_TRC 0x38000000 /* RAS Precharge Time at End of + Refresh: */ +#define SH7750_MCR_TRC_0 0x00000000 /* 0 */ +#define SH7750_MCR_TRC_3 0x08000000 /* 3 */ +#define SH7750_MCR_TRC_6 0x10000000 /* 6 */ +#define SH7750_MCR_TRC_9 0x18000000 /* 9 */ +#define SH7750_MCR_TRC_12 0x20000000 /* 12 */ +#define SH7750_MCR_TRC_15 0x28000000 /* 15 */ +#define SH7750_MCR_TRC_18 0x30000000 /* 18 */ +#define SH7750_MCR_TRC_21 0x38000000 /* 21 */ + +#define SH7750_MCR_TCAS 0x00800000 /* CAS Negation Period */ +#define SH7750_MCR_TCAS_1 0x00000000 /* 1 */ +#define SH7750_MCR_TCAS_2 0x00800000 /* 2 */ + +#define SH7750_MCR_TPC 0x00380000 /* DRAM: RAS Precharge Period + SDRAM: minimum number of cycles + until the next bank active cmd + is output after precharging */ +#define SH7750_MCR_TPC_S 19 +#define SH7750_MCR_TPC_SDRAM_1 0x00000000 /* 1 cycle */ +#define SH7750_MCR_TPC_SDRAM_2 0x00080000 /* 2 cycles */ +#define SH7750_MCR_TPC_SDRAM_3 0x00100000 /* 3 cycles */ +#define SH7750_MCR_TPC_SDRAM_4 0x00180000 /* 4 cycles */ +#define SH7750_MCR_TPC_SDRAM_5 0x00200000 /* 5 cycles */ +#define SH7750_MCR_TPC_SDRAM_6 0x00280000 /* 6 cycles */ +#define SH7750_MCR_TPC_SDRAM_7 0x00300000 /* 7 cycles */ +#define SH7750_MCR_TPC_SDRAM_8 0x00380000 /* 8 cycles */ + +#define SH7750_MCR_RCD 0x00030000 /* DRAM: RAS-CAS Assertion Delay time + SDRAM: bank active-read/write cmd + delay time */ +#define SH7750_MCR_RCD_DRAM_2 0x00000000 /* DRAM delay 2 clocks */ +#define SH7750_MCR_RCD_DRAM_3 0x00010000 /* DRAM delay 3 clocks */ +#define SH7750_MCR_RCD_DRAM_4 0x00020000 /* DRAM delay 4 clocks */ +#define SH7750_MCR_RCD_DRAM_5 0x00030000 /* DRAM delay 5 clocks */ +#define SH7750_MCR_RCD_SDRAM_2 0x00010000 /* DRAM delay 2 clocks */ +#define SH7750_MCR_RCD_SDRAM_3 0x00020000 /* DRAM delay 3 clocks */ +#define SH7750_MCR_RCD_SDRAM_4 0x00030000 /* DRAM delay 4 clocks */ + +#define SH7750_MCR_TRWL 0x0000E000 /* SDRAM Write Precharge Delay */ +#define SH7750_MCR_TRWL_1 0x00000000 /* 1 */ +#define SH7750_MCR_TRWL_2 0x00002000 /* 2 */ +#define SH7750_MCR_TRWL_3 0x00004000 /* 3 */ +#define SH7750_MCR_TRWL_4 0x00006000 /* 4 */ +#define SH7750_MCR_TRWL_5 0x00008000 /* 5 */ + +#define SH7750_MCR_TRAS 0x00001C00 /* DRAM: CAS-Before-RAS Refresh RAS + asserting period + SDRAM: Command interval after + synchronous DRAM refresh */ +#define SH7750_MCR_TRAS_DRAM_2 0x00000000 /* 2 */ +#define SH7750_MCR_TRAS_DRAM_3 0x00000400 /* 3 */ +#define SH7750_MCR_TRAS_DRAM_4 0x00000800 /* 4 */ +#define SH7750_MCR_TRAS_DRAM_5 0x00000C00 /* 5 */ +#define SH7750_MCR_TRAS_DRAM_6 0x00001000 /* 6 */ +#define SH7750_MCR_TRAS_DRAM_7 0x00001400 /* 7 */ +#define SH7750_MCR_TRAS_DRAM_8 0x00001800 /* 8 */ +#define SH7750_MCR_TRAS_DRAM_9 0x00001C00 /* 9 */ + +#define SH7750_MCR_TRAS_SDRAM_TRC_4 0x00000000 /* 4 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_5 0x00000400 /* 5 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_6 0x00000800 /* 6 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_7 0x00000C00 /* 7 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_8 0x00001000 /* 8 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_9 0x00001400 /* 9 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_10 0x00001800 /* 10 + TRC */ +#define SH7750_MCR_TRAS_SDRAM_TRC_11 0x00001C00 /* 11 + TRC */ + +#define SH7750_MCR_BE 0x00000200 /* Burst Enable */ +#define SH7750_MCR_SZ 0x00000180 /* Memory Data Size */ +#define SH7750_MCR_SZ_64 0x00000000 /* 64 bits */ +#define SH7750_MCR_SZ_16 0x00000100 /* 16 bits */ +#define SH7750_MCR_SZ_32 0x00000180 /* 32 bits */ + +#define SH7750_MCR_AMX 0x00000078 /* Address Multiplexing */ +#define SH7750_MCR_AMX_S 3 +#define SH7750_MCR_AMX_DRAM_8BIT_COL 0x00000000 /* 8-bit column addr */ +#define SH7750_MCR_AMX_DRAM_9BIT_COL 0x00000008 /* 9-bit column addr */ +#define SH7750_MCR_AMX_DRAM_10BIT_COL 0x00000010 /* 10-bit column addr */ +#define SH7750_MCR_AMX_DRAM_11BIT_COL 0x00000018 /* 11-bit column addr */ +#define SH7750_MCR_AMX_DRAM_12BIT_COL 0x00000020 /* 12-bit column addr */ +/* See SH7750 Hardware Manual for SDRAM address multiplexor selection */ + +#define SH7750_MCR_RFSH 0x00000004 /* Refresh Control */ +#define SH7750_MCR_RMODE 0x00000002 /* Refresh Mode: */ +#define SH7750_MCR_RMODE_NORMAL 0x00000000 /* Normal Refresh Mode */ +#define SH7750_MCR_RMODE_SELF 0x00000002 /* Self-Refresh Mode */ +#define SH7750_MCR_RMODE_EDO 0x00000001 /* EDO Mode */ + +/* SDRAM Mode Set address */ +#define SH7750_SDRAM_MODE_A2_BASE 0xFF900000 +#define SH7750_SDRAM_MODE_A3_BASE 0xFF940000 +#define SH7750_SDRAM_MODE_A2_32BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 2)) +#define SH7750_SDRAM_MODE_A3_32BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 2)) +#define SH7750_SDRAM_MODE_A2_64BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 3)) +#define SH7750_SDRAM_MODE_A3_64BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 3)) + + +/* PCMCIA Control Register (half) - PCR */ +#define SH7750_PCR_REGOFS 0x800018 /* offset */ +#define SH7750_PCR SH7750_P4_REG32(SH7750_PCR_REGOFS) +#define SH7750_PCR_A7 SH7750_A7_REG32(SH7750_PCR_REGOFS) + +#define SH7750_PCR_A5PCW 0xC000 /* Area 5 PCMCIA Wait - Number of wait + states to be added to the number of + waits specified by WCR2 in a low-speed + PCMCIA wait cycle */ +#define SH7750_PCR_A5PCW_0 0x0000 /* 0 waits inserted */ +#define SH7750_PCR_A5PCW_15 0x4000 /* 15 waits inserted */ +#define SH7750_PCR_A5PCW_30 0x8000 /* 30 waits inserted */ +#define SH7750_PCR_A5PCW_50 0xC000 /* 50 waits inserted */ + +#define SH7750_PCR_A6PCW 0x3000 /* Area 6 PCMCIA Wait - Number of wait + states to be added to the number of + waits specified by WCR2 in a low-speed + PCMCIA wait cycle */ +#define SH7750_PCR_A6PCW_0 0x0000 /* 0 waits inserted */ +#define SH7750_PCR_A6PCW_15 0x1000 /* 15 waits inserted */ +#define SH7750_PCR_A6PCW_30 0x2000 /* 30 waits inserted */ +#define SH7750_PCR_A6PCW_50 0x3000 /* 50 waits inserted */ + +#define SH7750_PCR_A5TED 0x0E00 /* Area 5 Address-OE\/WE\ Assertion Delay, + delay time from address output to + OE\/WE\ assertion on the connected + PCMCIA interface */ +#define SH7750_PCR_A5TED_S 9 +#define SH7750_PCR_A6TED 0x01C0 /* Area 6 Address-OE\/WE\ Assertion Delay */ +#define SH7750_PCR_A6TED_S 6 + +#define SH7750_PCR_TED_0WS 0 /* 0 Waits inserted */ +#define SH7750_PCR_TED_1WS 1 /* 1 Waits inserted */ +#define SH7750_PCR_TED_2WS 2 /* 2 Waits inserted */ +#define SH7750_PCR_TED_3WS 3 /* 3 Waits inserted */ +#define SH7750_PCR_TED_6WS 4 /* 6 Waits inserted */ +#define SH7750_PCR_TED_9WS 5 /* 9 Waits inserted */ +#define SH7750_PCR_TED_12WS 6 /* 12 Waits inserted */ +#define SH7750_PCR_TED_15WS 7 /* 15 Waits inserted */ + +#define SH7750_PCR_A5TEH 0x0038 /* Area 5 OE\/WE\ Negation Address delay, + address hold delay time from OE\/WE\ + negation in a write on the connected + PCMCIA interface */ +#define SH7750_PCR_A5TEH_S 3 + +#define SH7750_PCR_A6TEH 0x0007 /* Area 6 OE\/WE\ Negation Address delay */ +#define SH7750_PCR_A6TEH_S 0 + +#define SH7750_PCR_TEH_0WS 0 /* 0 Waits inserted */ +#define SH7750_PCR_TEH_1WS 1 /* 1 Waits inserted */ +#define SH7750_PCR_TEH_2WS 2 /* 2 Waits inserted */ +#define SH7750_PCR_TEH_3WS 3 /* 3 Waits inserted */ +#define SH7750_PCR_TEH_6WS 4 /* 6 Waits inserted */ +#define SH7750_PCR_TEH_9WS 5 /* 9 Waits inserted */ +#define SH7750_PCR_TEH_12WS 6 /* 12 Waits inserted */ +#define SH7750_PCR_TEH_15WS 7 /* 15 Waits inserted */ + +/* Refresh Timer Control/Status Register (half) - RTSCR */ +#define SH7750_RTCSR_REGOFS 0x80001C /* offset */ +#define SH7750_RTCSR SH7750_P4_REG32(SH7750_RTCSR_REGOFS) +#define SH7750_RTCSR_A7 SH7750_A7_REG32(SH7750_RTCSR_REGOFS) + +#define SH7750_RTCSR_KEY 0xA500 /* RTCSR write key */ +#define SH7750_RTCSR_CMF 0x0080 /* Compare-Match Flag (indicates a + match between the refresh timer + counter and refresh time constant) */ +#define SH7750_RTCSR_CMIE 0x0040 /* Compare-Match Interrupt Enable */ +#define SH7750_RTCSR_CKS 0x0038 /* Refresh Counter Clock Selects */ +#define SH7750_RTCSR_CKS_DIS 0x0000 /* Clock Input Disabled */ +#define SH7750_RTCSR_CKS_CKIO_DIV4 0x0008 /* Bus Clock / 4 */ +#define SH7750_RTCSR_CKS_CKIO_DIV16 0x0010 /* Bus Clock / 16 */ +#define SH7750_RTCSR_CKS_CKIO_DIV64 0x0018 /* Bus Clock / 64 */ +#define SH7750_RTCSR_CKS_CKIO_DIV256 0x0020 /* Bus Clock / 256 */ +#define SH7750_RTCSR_CKS_CKIO_DIV1024 0x0028 /* Bus Clock / 1024 */ +#define SH7750_RTCSR_CKS_CKIO_DIV2048 0x0030 /* Bus Clock / 2048 */ +#define SH7750_RTCSR_CKS_CKIO_DIV4096 0x0038 /* Bus Clock / 4096 */ + +#define SH7750_RTCSR_OVF 0x0004 /* Refresh Count Overflow Flag */ +#define SH7750_RTCSR_OVIE 0x0002 /* Refresh Count Overflow Interrupt + Enable */ +#define SH7750_RTCSR_LMTS 0x0001 /* Refresh Count Overflow Limit Select */ +#define SH7750_RTCSR_LMTS_1024 0x0000 /* Count Limit is 1024 */ +#define SH7750_RTCSR_LMTS_512 0x0001 /* Count Limit is 512 */ + +/* Refresh Timer Counter (half) - RTCNT */ +#define SH7750_RTCNT_REGOFS 0x800020 /* offset */ +#define SH7750_RTCNT SH7750_P4_REG32(SH7750_RTCNT_REGOFS) +#define SH7750_RTCNT_A7 SH7750_A7_REG32(SH7750_RTCNT_REGOFS) + +#define SH7750_RTCNT_KEY 0xA500 /* RTCNT write key */ + +/* Refresh Time Constant Register (half) - RTCOR */ +#define SH7750_RTCOR_REGOFS 0x800024 /* offset */ +#define SH7750_RTCOR SH7750_P4_REG32(SH7750_RTCOR_REGOFS) +#define SH7750_RTCOR_A7 SH7750_A7_REG32(SH7750_RTCOR_REGOFS) + +#define SH7750_RTCOR_KEY 0xA500 /* RTCOR write key */ + +/* Refresh Count Register (half) - RFCR */ +#define SH7750_RFCR_REGOFS 0x800028 /* offset */ +#define SH7750_RFCR SH7750_P4_REG32(SH7750_RFCR_REGOFS) +#define SH7750_RFCR_A7 SH7750_A7_REG32(SH7750_RFCR_REGOFS) + +#define SH7750_RFCR_KEY 0xA400 /* RFCR write key */ + +/* + * Direct Memory Access Controller (DMAC) + */ + +/* DMA Source Address Register - SAR0, SAR1, SAR2, SAR3 */ +#define SH7750_SAR_REGOFS(n) (0xA00000 + ((n)*16)) /* offset */ +#define SH7750_SAR(n) SH7750_P4_REG32(SH7750_SAR_REGOFS(n)) +#define SH7750_SAR_A7(n) SH7750_A7_REG32(SH7750_SAR_REGOFS(n)) +#define SH7750_SAR0 SH7750_SAR(0) +#define SH7750_SAR1 SH7750_SAR(1) +#define SH7750_SAR2 SH7750_SAR(2) +#define SH7750_SAR3 SH7750_SAR(3) +#define SH7750_SAR0_A7 SH7750_SAR_A7(0) +#define SH7750_SAR1_A7 SH7750_SAR_A7(1) +#define SH7750_SAR2_A7 SH7750_SAR_A7(2) +#define SH7750_SAR3_A7 SH7750_SAR_A7(3) + +/* DMA Destination Address Register - DAR0, DAR1, DAR2, DAR3 */ +#define SH7750_DAR_REGOFS(n) (0xA00004 + ((n)*16)) /* offset */ +#define SH7750_DAR(n) SH7750_P4_REG32(SH7750_DAR_REGOFS(n)) +#define SH7750_DAR_A7(n) SH7750_A7_REG32(SH7750_DAR_REGOFS(n)) +#define SH7750_DAR0 SH7750_DAR(0) +#define SH7750_DAR1 SH7750_DAR(1) +#define SH7750_DAR2 SH7750_DAR(2) +#define SH7750_DAR3 SH7750_DAR(3) +#define SH7750_DAR0_A7 SH7750_DAR_A7(0) +#define SH7750_DAR1_A7 SH7750_DAR_A7(1) +#define SH7750_DAR2_A7 SH7750_DAR_A7(2) +#define SH7750_DAR3_A7 SH7750_DAR_A7(3) + +/* DMA Transfer Count Register - DMATCR0, DMATCR1, DMATCR2, DMATCR3 */ +#define SH7750_DMATCR_REGOFS(n) (0xA00008 + ((n)*16)) /* offset */ +#define SH7750_DMATCR(n) SH7750_P4_REG32(SH7750_DMATCR_REGOFS(n)) +#define SH7750_DMATCR_A7(n) SH7750_A7_REG32(SH7750_DMATCR_REGOFS(n)) +#define SH7750_DMATCR0_P4 SH7750_DMATCR(0) +#define SH7750_DMATCR1_P4 SH7750_DMATCR(1) +#define SH7750_DMATCR2_P4 SH7750_DMATCR(2) +#define SH7750_DMATCR3_P4 SH7750_DMATCR(3) +#define SH7750_DMATCR0_A7 SH7750_DMATCR_A7(0) +#define SH7750_DMATCR1_A7 SH7750_DMATCR_A7(1) +#define SH7750_DMATCR2_A7 SH7750_DMATCR_A7(2) +#define SH7750_DMATCR3_A7 SH7750_DMATCR_A7(3) + +/* DMA Channel Control Register - CHCR0, CHCR1, CHCR2, CHCR3 */ +#define SH7750_CHCR_REGOFS(n) (0xA0000C + ((n)*16)) /* offset */ +#define SH7750_CHCR(n) SH7750_P4_REG32(SH7750_CHCR_REGOFS(n)) +#define SH7750_CHCR_A7(n) SH7750_A7_REG32(SH7750_CHCR_REGOFS(n)) +#define SH7750_CHCR0 SH7750_CHCR(0) +#define SH7750_CHCR1 SH7750_CHCR(1) +#define SH7750_CHCR2 SH7750_CHCR(2) +#define SH7750_CHCR3 SH7750_CHCR(3) +#define SH7750_CHCR0_A7 SH7750_CHCR_A7(0) +#define SH7750_CHCR1_A7 SH7750_CHCR_A7(1) +#define SH7750_CHCR2_A7 SH7750_CHCR_A7(2) +#define SH7750_CHCR3_A7 SH7750_CHCR_A7(3) + +#define SH7750_CHCR_SSA 0xE0000000 /* Source Address Space Attribute */ +#define SH7750_CHCR_SSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */ +#define SH7750_CHCR_SSA_DYNBSZ 0x20000000 /* Dynamic Bus Sizing I/O space */ +#define SH7750_CHCR_SSA_IO8 0x40000000 /* 8-bit I/O space */ +#define SH7750_CHCR_SSA_IO16 0x60000000 /* 16-bit I/O space */ +#define SH7750_CHCR_SSA_CMEM8 0x80000000 /* 8-bit common memory space */ +#define SH7750_CHCR_SSA_CMEM16 0xA0000000 /* 16-bit common memory space */ +#define SH7750_CHCR_SSA_AMEM8 0xC0000000 /* 8-bit attribute memory space */ +#define SH7750_CHCR_SSA_AMEM16 0xE0000000 /* 16-bit attribute memory space */ + +#define SH7750_CHCR_STC 0x10000000 /* Source Address Wait Control Select, + specifies CS5 or CS6 space wait + control for PCMCIA access */ + +#define SH7750_CHCR_DSA 0x0E000000 /* Source Address Space Attribute */ +#define SH7750_CHCR_DSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */ +#define SH7750_CHCR_DSA_DYNBSZ 0x02000000 /* Dynamic Bus Sizing I/O space */ +#define SH7750_CHCR_DSA_IO8 0x04000000 /* 8-bit I/O space */ +#define SH7750_CHCR_DSA_IO16 0x06000000 /* 16-bit I/O space */ +#define SH7750_CHCR_DSA_CMEM8 0x08000000 /* 8-bit common memory space */ +#define SH7750_CHCR_DSA_CMEM16 0x0A000000 /* 16-bit common memory space */ +#define SH7750_CHCR_DSA_AMEM8 0x0C000000 /* 8-bit attribute memory space */ +#define SH7750_CHCR_DSA_AMEM16 0x0E000000 /* 16-bit attribute memory space */ + +#define SH7750_CHCR_DTC 0x01000000 /* Destination Address Wait Control + Select, specifies CS5 or CS6 + space wait control for PCMCIA + access */ + +#define SH7750_CHCR_DS 0x00080000 /* DREQ\ Select : */ +#define SH7750_CHCR_DS_LOWLVL 0x00000000 /* Low Level Detection */ +#define SH7750_CHCR_DS_FALL 0x00080000 /* Falling Edge Detection */ + +#define SH7750_CHCR_RL 0x00040000 /* Request Check Level: */ +#define SH7750_CHCR_RL_ACTH 0x00000000 /* DRAK is an active high out */ +#define SH7750_CHCR_RL_ACTL 0x00040000 /* DRAK is an active low out */ + +#define SH7750_CHCR_AM 0x00020000 /* Acknowledge Mode: */ +#define SH7750_CHCR_AM_RD 0x00000000 /* DACK is output in read cycle */ +#define SH7750_CHCR_AM_WR 0x00020000 /* DACK is output in write cycle */ + +#define SH7750_CHCR_AL 0x00010000 /* Acknowledge Level: */ +#define SH7750_CHCR_AL_ACTH 0x00000000 /* DACK is an active high out */ +#define SH7750_CHCR_AL_ACTL 0x00010000 /* DACK is an active low out */ + +#define SH7750_CHCR_DM 0x0000C000 /* Destination Address Mode: */ +#define SH7750_CHCR_DM_FIX 0x00000000 /* Destination Addr Fixed */ +#define SH7750_CHCR_DM_INC 0x00004000 /* Destination Addr Incremented */ +#define SH7750_CHCR_DM_DEC 0x00008000 /* Destination Addr Decremented */ + +#define SH7750_CHCR_SM 0x00003000 /* Source Address Mode: */ +#define SH7750_CHCR_SM_FIX 0x00000000 /* Source Addr Fixed */ +#define SH7750_CHCR_SM_INC 0x00001000 /* Source Addr Incremented */ +#define SH7750_CHCR_SM_DEC 0x00002000 /* Source Addr Decremented */ + +#define SH7750_CHCR_RS 0x00000F00 /* Request Source Select: */ +#define SH7750_CHCR_RS_ER_DA_EA_TO_EA 0x000 /* External Request, Dual Address + Mode (External Addr Space-> + External Addr Space) */ +#define SH7750_CHCR_RS_ER_SA_EA_TO_ED 0x200 /* External Request, Single + Address Mode (External Addr + Space -> External Device) */ +#define SH7750_CHCR_RS_ER_SA_ED_TO_EA 0x300 /* External Request, Single + Address Mode, (External + Device -> External Addr + Space) */ +#define SH7750_CHCR_RS_AR_EA_TO_EA 0x400 /* Auto-Request (External Addr + Space -> External Addr Space) */ + +#define SH7750_CHCR_RS_AR_EA_TO_OCP 0x500 /* Auto-Request (External Addr + Space -> On-chip Peripheral + Module) */ +#define SH7750_CHCR_RS_AR_OCP_TO_EA 0x600 /* Auto-Request (On-chip + Peripheral Module -> + External Addr Space */ +#define SH7750_CHCR_RS_SCITX_EA_TO_SC 0x800 /* SCI Transmit-Data-Empty intr + transfer request (external + address space -> SCTDR1) */ +#define SH7750_CHCR_RS_SCIRX_SC_TO_EA 0x900 /* SCI Receive-Data-Full intr + transfer request (SCRDR1 -> + External Addr Space) */ +#define SH7750_CHCR_RS_SCIFTX_EA_TO_SC 0xA00 /* SCIF Transmit-Data-Empty intr + transfer request (external + address space -> SCFTDR1) */ +#define SH7750_CHCR_RS_SCIFRX_SC_TO_EA 0xB00 /* SCIF Receive-Data-Full intr + transfer request (SCFRDR2 -> + External Addr Space) */ +#define SH7750_CHCR_RS_TMU2_EA_TO_EA 0xC00 /* TMU Channel 2 (input capture + interrupt), (external address + space -> external address + space) */ +#define SH7750_CHCR_RS_TMU2_EA_TO_OCP 0xD00 /* TMU Channel 2 (input capture + interrupt), (external address + space -> on-chip peripheral + module) */ +#define SH7750_CHCR_RS_TMU2_OCP_TO_EA 0xE00 /* TMU Channel 2 (input capture + interrupt), (on-chip + peripheral module -> external + address space) */ + +#define SH7750_CHCR_TM 0x00000080 /* Transmit mode: */ +#define SH7750_CHCR_TM_CSTEAL 0x00000000 /* Cycle Steal Mode */ +#define SH7750_CHCR_TM_BURST 0x00000080 /* Burst Mode */ + +#define SH7750_CHCR_TS 0x00000070 /* Transmit Size: */ +#define SH7750_CHCR_TS_QUAD 0x00000000 /* Quadword Size (64 bits) */ +#define SH7750_CHCR_TS_BYTE 0x00000010 /* Byte Size (8 bit) */ +#define SH7750_CHCR_TS_WORD 0x00000020 /* Word Size (16 bit) */ +#define SH7750_CHCR_TS_LONG 0x00000030 /* Longword Size (32 bit) */ +#define SH7750_CHCR_TS_BLOCK 0x00000040 /* 32-byte block transfer */ + +#define SH7750_CHCR_IE 0x00000004 /* Interrupt Enable */ +#define SH7750_CHCR_TE 0x00000002 /* Transfer End */ +#define SH7750_CHCR_DE 0x00000001 /* DMAC Enable */ + +/* DMA Operation Register - DMAOR */ +#define SH7750_DMAOR_REGOFS 0xA00040 /* offset */ +#define SH7750_DMAOR SH7750_P4_REG32(SH7750_DMAOR_REGOFS) +#define SH7750_DMAOR_A7 SH7750_A7_REG32(SH7750_DMAOR_REGOFS) + +#define SH7750_DMAOR_DDT 0x00008000 /* On-Demand Data Transfer Mode */ + +#define SH7750_DMAOR_PR 0x00000300 /* Priority Mode: */ +#define SH7750_DMAOR_PR_0123 0x00000000 /* CH0 > CH1 > CH2 > CH3 */ +#define SH7750_DMAOR_PR_0231 0x00000100 /* CH0 > CH2 > CH3 > CH1 */ +#define SH7750_DMAOR_PR_2013 0x00000200 /* CH2 > CH0 > CH1 > CH3 */ +#define SH7750_DMAOR_PR_RR 0x00000300 /* Round-robin mode */ + +#define SH7750_DMAOR_COD 0x00000010 /* Check Overrun for DREQ\ */ +#define SH7750_DMAOR_AE 0x00000004 /* Address Error flag */ +#define SH7750_DMAOR_NMIF 0x00000002 /* NMI Flag */ +#define SH7750_DMAOR_DME 0x00000001 /* DMAC Master Enable */ + +/* + * Serial Communication Interface - SCI + * Serial Communication Interface with FIFO - SCIF + */ +/* SCI Receive Data Register (byte, read-only) - SCRDR1, SCFRDR2 */ +#define SH7750_SCRDR_REGOFS(n) ((n) == 1 ? 0xE00014 : 0xE80014) /* offset */ +#define SH7750_SCRDR(n) SH7750_P4_REG32(SH7750_SCRDR_REGOFS(n)) +#define SH7750_SCRDR1 SH7750_SCRDR(1) +#define SH7750_SCRDR2 SH7750_SCRDR(2) +#define SH7750_SCRDR_A7(n) SH7750_A7_REG32(SH7750_SCRDR_REGOFS(n)) +#define SH7750_SCRDR1_A7 SH7750_SCRDR_A7(1) +#define SH7750_SCRDR2_A7 SH7750_SCRDR_A7(2) + +/* SCI Transmit Data Register (byte) - SCTDR1, SCFTDR2 */ +#define SH7750_SCTDR_REGOFS(n) ((n) == 1 ? 0xE0000C : 0xE8000C) /* offset */ +#define SH7750_SCTDR(n) SH7750_P4_REG32(SH7750_SCTDR_REGOFS(n)) +#define SH7750_SCTDR1 SH7750_SCTDR(1) +#define SH7750_SCTDR2 SH7750_SCTDR(2) +#define SH7750_SCTDR_A7(n) SH7750_A7_REG32(SH7750_SCTDR_REGOFS(n)) +#define SH7750_SCTDR1_A7 SH7750_SCTDR_A7(1) +#define SH7750_SCTDR2_A7 SH7750_SCTDR_A7(2) + +/* SCI Serial Mode Register - SCSMR1(byte), SCSMR2(half) */ +#define SH7750_SCSMR_REGOFS(n) ((n) == 1 ? 0xE00000 : 0xE80000) /* offset */ +#define SH7750_SCSMR(n) SH7750_P4_REG32(SH7750_SCSMR_REGOFS(n)) +#define SH7750_SCSMR1 SH7750_SCSMR(1) +#define SH7750_SCSMR2 SH7750_SCSMR(2) +#define SH7750_SCSMR_A7(n) SH7750_A7_REG32(SH7750_SCSMR_REGOFS(n)) +#define SH7750_SCSMR1_A7 SH7750_SCSMR_A7(1) +#define SH7750_SCSMR2_A7 SH7750_SCSMR_A7(2) + +#define SH7750_SCSMR1_CA 0x80 /* Communication Mode (C/A\): */ +#define SH7750_SCSMR1_CA_ASYNC 0x00 /* Asynchronous Mode */ +#define SH7750_SCSMR1_CA_SYNC 0x80 /* Synchronous Mode */ +#define SH7750_SCSMR_CHR 0x40 /* Character Length: */ +#define SH7750_SCSMR_CHR_8 0x00 /* 8-bit data */ +#define SH7750_SCSMR_CHR_7 0x40 /* 7-bit data */ +#define SH7750_SCSMR_PE 0x20 /* Parity Enable */ +#define SH7750_SCSMR_PM 0x10 /* Parity Mode: */ +#define SH7750_SCSMR_PM_EVEN 0x00 /* Even Parity */ +#define SH7750_SCSMR_PM_ODD 0x10 /* Odd Parity */ +#define SH7750_SCSMR_STOP 0x08 /* Stop Bit Length: */ +#define SH7750_SCSMR_STOP_1 0x00 /* 1 stop bit */ +#define SH7750_SCSMR_STOP_2 0x08 /* 2 stop bit */ +#define SH7750_SCSMR1_MP 0x04 /* Multiprocessor Mode */ +#define SH7750_SCSMR_CKS 0x03 /* Clock Select */ +#define SH7750_SCSMR_CKS_S 0 +#define SH7750_SCSMR_CKS_DIV1 0x00 /* Periph clock */ +#define SH7750_SCSMR_CKS_DIV4 0x01 /* Periph clock / 4 */ +#define SH7750_SCSMR_CKS_DIV16 0x02 /* Periph clock / 16 */ +#define SH7750_SCSMR_CKS_DIV64 0x03 /* Periph clock / 64 */ + +/* SCI Serial Control Register - SCSCR1(byte), SCSCR2(half) */ +#define SH7750_SCSCR_REGOFS(n) ((n) == 1 ? 0xE00008 : 0xE80008) /* offset */ +#define SH7750_SCSCR(n) SH7750_P4_REG32(SH7750_SCSCR_REGOFS(n)) +#define SH7750_SCSCR1 SH7750_SCSCR(1) +#define SH7750_SCSCR2 SH7750_SCSCR(2) +#define SH7750_SCSCR_A7(n) SH7750_A7_REG32(SH7750_SCSCR_REGOFS(n)) +#define SH7750_SCSCR1_A7 SH7750_SCSCR_A7(1) +#define SH7750_SCSCR2_A7 SH7750_SCSCR_A7(2) + +#define SH7750_SCSCR_TIE 0x80 /* Transmit Interrupt Enable */ +#define SH7750_SCSCR_RIE 0x40 /* Receive Interrupt Enable */ +#define SH7750_SCSCR_TE 0x20 /* Transmit Enable */ +#define SH7750_SCSCR_RE 0x10 /* Receive Enable */ +#define SH7750_SCSCR1_MPIE 0x08 /* Multiprocessor Interrupt Enable */ +#define SH7750_SCSCR2_REIE 0x08 /* Receive Error Interrupt Enable */ +#define SH7750_SCSCR1_TEIE 0x04 /* Transmit End Interrupt Enable */ +#define SH7750_SCSCR1_CKE 0x03 /* Clock Enable: */ +#define SH7750_SCSCR_CKE_INTCLK 0x00 /* Use Internal Clock */ +#define SH7750_SCSCR_CKE_EXTCLK 0x02 /* Use External Clock from SCK */ +#define SH7750_SCSCR1_CKE_ASYNC_SCK_CLKOUT 0x01 /* Use SCK as a clock output + in asynchronous mode */ + +/* SCI Serial Status Register - SCSSR1(byte), SCSFR2(half) */ +#define SH7750_SCSSR_REGOFS(n) ((n) == 1 ? 0xE00010 : 0xE80010) /* offset */ +#define SH7750_SCSSR(n) SH7750_P4_REG32(SH7750_SCSSR_REGOFS(n)) +#define SH7750_SCSSR1 SH7750_SCSSR(1) +#define SH7750_SCSFR2 SH7750_SCSSR(2) +#define SH7750_SCSSR_A7(n) SH7750_A7_REG32(SH7750_SCSSR_REGOFS(n)) +#define SH7750_SCSSR1_A7 SH7750_SCSSR_A7(1) +#define SH7750_SCSFR2_A7 SH7750_SCSSR_A7(2) + +#define SH7750_SCSSR1_TDRE 0x80 /* Transmit Data Register Empty */ +#define SH7750_SCSSR1_RDRF 0x40 /* Receive Data Register Full */ +#define SH7750_SCSSR1_ORER 0x20 /* Overrun Error */ +#define SH7750_SCSSR1_FER 0x10 /* Framing Error */ +#define SH7750_SCSSR1_PER 0x08 /* Parity Error */ +#define SH7750_SCSSR1_TEND 0x04 /* Transmit End */ +#define SH7750_SCSSR1_MPB 0x02 /* Multiprocessor Bit */ +#define SH7750_SCSSR1_MPBT 0x01 /* Multiprocessor Bit Transfer */ + +#define SH7750_SCFSR2_PERN 0xF000 /* Number of Parity Errors */ +#define SH7750_SCFSR2_PERN_S 12 +#define SH7750_SCFSR2_FERN 0x0F00 /* Number of Framing Errors */ +#define SH7750_SCFSR2_FERN_S 8 +#define SH7750_SCFSR2_ER 0x0080 /* Receive Error */ +#define SH7750_SCFSR2_TEND 0x0040 /* Transmit End */ +#define SH7750_SCFSR2_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SH7750_SCFSR2_BRK 0x0010 /* Break Detect */ +#define SH7750_SCFSR2_FER 0x0008 /* Framing Error */ +#define SH7750_SCFSR2_PER 0x0004 /* Parity Error */ +#define SH7750_SCFSR2_RDF 0x0002 /* Receive FIFO Data Full */ +#define SH7750_SCFSR2_DR 0x0001 /* Receive Data Ready */ + +/* SCI Serial Port Register - SCSPTR1(byte) */ +#define SH7750_SCSPTR1_REGOFS 0xE0001C /* offset */ +#define SH7750_SCSPTR1 SH7750_P4_REG32(SH7750_SCSPTR1_REGOFS) +#define SH7750_SCSPTR1_A7 SH7750_A7_REG32(SH7750_SCSPTR1_REGOFS) + +#define SH7750_SCSPTR1_EIO 0x80 /* Error Interrupt Only */ +#define SH7750_SCSPTR1_SPB1IO 0x08 /* 1: Output SPB1DT bit to SCK pin */ +#define SH7750_SCSPTR1_SPB1DT 0x04 /* Serial Port Clock Port Data */ +#define SH7750_SCSPTR1_SPB0IO 0x02 /* 1: Output SPB0DT bit to TxD pin */ +#define SH7750_SCSPTR1_SPB0DT 0x01 /* Serial Port Break Data */ + +/* SCIF Serial Port Register - SCSPTR2(half) */ +#define SH7750_SCSPTR2_REGOFS 0xE80020 /* offset */ +#define SH7750_SCSPTR2 SH7750_P4_REG32(SH7750_SCSPTR2_REGOFS) +#define SH7750_SCSPTR2_A7 SH7750_A7_REG32(SH7750_SCSPTR2_REGOFS) + +#define SH7750_SCSPTR2_RTSIO 0x80 /* 1: Output RTSDT bit to RTS2\ pin */ +#define SH7750_SCSPTR2_RTSDT 0x40 /* RTS Port Data */ +#define SH7750_SCSPTR2_CTSIO 0x20 /* 1: Output CTSDT bit to CTS2\ pin */ +#define SH7750_SCSPTR2_CTSDT 0x10 /* CTS Port Data */ +#define SH7750_SCSPTR2_SPB2IO 0x02 /* 1: Output SPBDT bit to TxD2 pin */ +#define SH7750_SCSPTR2_SPB2DT 0x01 /* Serial Port Break Data */ + +/* SCI Bit Rate Register - SCBRR1(byte), SCBRR2(byte) */ +#define SH7750_SCBRR_REGOFS(n) ((n) == 1 ? 0xE00004 : 0xE80004) /* offset */ +#define SH7750_SCBRR(n) SH7750_P4_REG32(SH7750_SCBRR_REGOFS(n)) +#define SH7750_SCBRR1 SH7750_SCBRR_P4(1) +#define SH7750_SCBRR2 SH7750_SCBRR_P4(2) +#define SH7750_SCBRR_A7(n) SH7750_A7_REG32(SH7750_SCBRR_REGOFS(n)) +#define SH7750_SCBRR1_A7 SH7750_SCBRR_A7(1) +#define SH7750_SCBRR2_A7 SH7750_SCBRR_A7(2) + +/* SCIF FIFO Control Register - SCFCR2(half) */ +#define SH7750_SCFCR2_REGOFS 0xE80018 /* offset */ +#define SH7750_SCFCR2 SH7750_P4_REG32(SH7750_SCFCR2_REGOFS) +#define SH7750_SCFCR2_A7 SH7750_A7_REG32(SH7750_SCFCR2_REGOFS) + +#define SH7750_SCFCR2_RSTRG 0x700 /* RTS2\ Output Active Trigger; RTS2\ + signal goes to high level when the + number of received data stored in + FIFO exceeds the trigger number */ +#define SH7750_SCFCR2_RSTRG_15 0x000 /* 15 bytes */ +#define SH7750_SCFCR2_RSTRG_1 0x000 /* 1 byte */ +#define SH7750_SCFCR2_RSTRG_4 0x000 /* 4 bytes */ +#define SH7750_SCFCR2_RSTRG_6 0x000 /* 6 bytes */ +#define SH7750_SCFCR2_RSTRG_8 0x000 /* 8 bytes */ +#define SH7750_SCFCR2_RSTRG_10 0x000 /* 10 bytes */ +#define SH7750_SCFCR2_RSTRG_14 0x000 /* 14 bytes */ + +#define SH7750_SCFCR2_RTRG 0x0C0 /* Receive FIFO Data Number Trigger, + Receive Data Full (RDF) Flag sets + when number of receive data bytes is + equal or greater than the trigger + number */ +#define SH7750_SCFCR2_RTRG_1 0x000 /* 1 byte */ +#define SH7750_SCFCR2_RTRG_4 0x040 /* 4 bytes */ +#define SH7750_SCFCR2_RTRG_8 0x080 /* 8 bytes */ +#define SH7750_SCFCR2_RTRG_14 0x0C0 /* 14 bytes */ + +#define SH7750_SCFCR2_TTRG 0x030 /* Transmit FIFO Data Number Trigger, + Transmit FIFO Data Register Empty (TDFE) + flag sets when the number of remaining + transmit data bytes is equal or less + than the trigger number */ +#define SH7750_SCFCR2_TTRG_8 0x000 /* 8 bytes */ +#define SH7750_SCFCR2_TTRG_4 0x010 /* 4 bytes */ +#define SH7750_SCFCR2_TTRG_2 0x020 /* 2 bytes */ +#define SH7750_SCFCR2_TTRG_1 0x030 /* 1 byte */ + +#define SH7750_SCFCR2_MCE 0x008 /* Modem Control Enable */ +#define SH7750_SCFCR2_TFRST 0x004 /* Transmit FIFO Data Register Reset, + invalidates the transmit data in the + transmit FIFO */ +#define SH7750_SCFCR2_RFRST 0x002 /* Receive FIFO Data Register Reset, + invalidates the receive data in the + receive FIFO data register and resets + it to the empty state */ +#define SH7750_SCFCR2_LOOP 0x001 /* Loopback Test */ + +/* SCIF FIFO Data Count Register - SCFDR2(half, read-only) */ +#define SH7750_SCFDR2_REGOFS 0xE8001C /* offset */ +#define SH7750_SCFDR2 SH7750_P4_REG32(SH7750_SCFDR2_REGOFS) +#define SH7750_SCFDR2_A7 SH7750_A7_REG32(SH7750_SCFDR2_REGOFS) + +#define SH7750_SCFDR2_T 0x1F00 /* Number of untransmitted data bytes + in transmit FIFO */ +#define SH7750_SCFDR2_T_S 8 +#define SH7750_SCFDR2_R 0x001F /* Number of received data bytes in + receive FIFO */ +#define SH7750_SCFDR2_R_S 0 + +/* SCIF Line Status Register - SCLSR2(half, read-only) */ +#define SH7750_SCLSR2_REGOFS 0xE80024 /* offset */ +#define SH7750_SCLSR2 SH7750_P4_REG32(SH7750_SCLSR2_REGOFS) +#define SH7750_SCLSR2_A7 SH7750_A7_REG32(SH7750_SCLSR2_REGOFS) + +#define SH7750_SCLSR2_ORER 0x0001 /* Overrun Error */ + +/* + * SCI-based Smart Card Interface + */ +/* Smart Card Mode Register - SCSCMR1(byte) */ +#define SH7750_SCSCMR1_REGOFS 0xE00018 /* offset */ +#define SH7750_SCSCMR1 SH7750_P4_REG32(SH7750_SCSCMR1_REGOFS) +#define SH7750_SCSCMR1_A7 SH7750_A7_REG32(SH7750_SCSCMR1_REGOFS) + +#define SH7750_SCSCMR1_SDIR 0x08 /* Smart Card Data Transfer Direction: */ +#define SH7750_SCSCMR1_SDIR_LSBF 0x00 /* LSB-first */ +#define SH7750_SCSCMR1_SDIR_MSBF 0x08 /* MSB-first */ + +#define SH7750_SCSCMR1_SINV 0x04 /* Smart Card Data Inversion */ +#define SH7750_SCSCMR1_SMIF 0x01 /* Smart Card Interface Mode Select */ + +/* Smart-card specific bits in other registers */ +/* SCSMR1: */ +#define SH7750_SCSMR1_GSM 0x80 /* GSM mode select */ + +/* SCSSR1: */ +#define SH7750_SCSSR1_ERS 0x10 /* Error Signal Status */ + +/* + * I/O Ports + */ +/* Port Control Register A - PCTRA */ +#define SH7750_PCTRA_REGOFS 0x80002C /* offset */ +#define SH7750_PCTRA SH7750_P4_REG32(SH7750_PCTRA_REGOFS) +#define SH7750_PCTRA_A7 SH7750_A7_REG32(SH7750_PCTRA_REGOFS) + +#define SH7750_PCTRA_PBPUP(n) 0 /* Bit n is pulled up */ +#define SH7750_PCTRA_PBNPUP(n) (1 << ((n)*2+1)) /* Bit n is not pulled up */ +#define SH7750_PCTRA_PBINP(n) 0 /* Bit n is an input */ +#define SH7750_PCTRA_PBOUT(n) (1 << ((n)*2)) /* Bit n is an output */ + +/* Port Data Register A - PDTRA(half) */ +#define SH7750_PDTRA_REGOFS 0x800030 /* offset */ +#define SH7750_PDTRA SH7750_P4_REG32(SH7750_PDTRA_REGOFS) +#define SH7750_PDTRA_A7 SH7750_A7_REG32(SH7750_PDTRA_REGOFS) + +#define SH7750_PDTRA_BIT(n) (1 << (n)) + +/* Port Control Register B - PCTRB */ +#define SH7750_PCTRB_REGOFS 0x800040 /* offset */ +#define SH7750_PCTRB SH7750_P4_REG32(SH7750_PCTRB_REGOFS) +#define SH7750_PCTRB_A7 SH7750_A7_REG32(SH7750_PCTRB_REGOFS) + +#define SH7750_PCTRB_PBPUP(n) 0 /* Bit n is pulled up */ +#define SH7750_PCTRB_PBNPUP(n) (1 << ((n-16)*2+1)) /* Bit n is not pulled up */ +#define SH7750_PCTRB_PBINP(n) 0 /* Bit n is an input */ +#define SH7750_PCTRB_PBOUT(n) (1 << ((n-16)*2)) /* Bit n is an output */ + +/* Port Data Register B - PDTRB(half) */ +#define SH7750_PDTRB_REGOFS 0x800044 /* offset */ +#define SH7750_PDTRB SH7750_P4_REG32(SH7750_PDTRB_REGOFS) +#define SH7750_PDTRB_A7 SH7750_A7_REG32(SH7750_PDTRB_REGOFS) + +#define SH7750_PDTRB_BIT(n) (1 << ((n)-16)) + +/* GPIO Interrupt Control Register - GPIOIC(half) */ +#define SH7750_GPIOIC_REGOFS 0x800048 /* offset */ +#define SH7750_GPIOIC SH7750_P4_REG32(SH7750_GPIOIC_REGOFS) +#define SH7750_GPIOIC_A7 SH7750_A7_REG32(SH7750_GPIOIC_REGOFS) + +#define SH7750_GPIOIC_PTIREN(n) (1 << (n)) /* Port n is used as a GPIO int */ + +/* + * Interrupt Controller - INTC + */ +/* Interrupt Control Register - ICR (half) */ +#define SH7750_ICR_REGOFS 0xD00000 /* offset */ +#define SH7750_ICR SH7750_P4_REG32(SH7750_ICR_REGOFS) +#define SH7750_ICR_A7 SH7750_A7_REG32(SH7750_ICR_REGOFS) + +#define SH7750_ICR_NMIL 0x8000 /* NMI Input Level */ +#define SH7750_ICR_MAI 0x4000 /* NMI Interrupt Mask */ + +#define SH7750_ICR_NMIB 0x0200 /* NMI Block Mode: */ +#define SH7750_ICR_NMIB_BLK 0x0000 /* NMI requests held pending while + SR.BL bit is set to 1 */ +#define SH7750_ICR_NMIB_NBLK 0x0200 /* NMI requests detected when SR.BL bit + set to 1 */ + +#define SH7750_ICR_NMIE 0x0100 /* NMI Edge Select: */ +#define SH7750_ICR_NMIE_FALL 0x0000 /* Interrupt request detected on falling + edge of NMI input */ +#define SH7750_ICR_NMIE_RISE 0x0100 /* Interrupt request detected on rising + edge of NMI input */ + +#define SH7750_ICR_IRLM 0x0080 /* IRL Pin Mode: */ +#define SH7750_ICR_IRLM_ENC 0x0000 /* IRL\ pins used as a level-encoded + interrupt requests */ +#define SH7750_ICR_IRLM_RAW 0x0080 /* IRL\ pins used as a four independent + interrupt requests */ + +/* Interrupt Priority Register A - IPRA (half) */ +#define SH7750_IPRA_REGOFS 0xD00004 /* offset */ +#define SH7750_IPRA SH7750_P4_REG32(SH7750_IPRA_REGOFS) +#define SH7750_IPRA_A7 SH7750_A7_REG32(SH7750_IPRA_REGOFS) + +#define SH7750_IPRA_TMU0 0xF000 /* TMU0 interrupt priority */ +#define SH7750_IPRA_TMU0_S 12 +#define SH7750_IPRA_TMU1 0x0F00 /* TMU1 interrupt priority */ +#define SH7750_IPRA_TMU1_S 8 +#define SH7750_IPRA_TMU2 0x00F0 /* TMU2 interrupt priority */ +#define SH7750_IPRA_TMU2_S 4 +#define SH7750_IPRA_RTC 0x000F /* RTC interrupt priority */ +#define SH7750_IPRA_RTC_S 0 + +/* Interrupt Priority Register B - IPRB (half) */ +#define SH7750_IPRB_REGOFS 0xD00008 /* offset */ +#define SH7750_IPRB SH7750_P4_REG32(SH7750_IPRB_REGOFS) +#define SH7750_IPRB_A7 SH7750_A7_REG32(SH7750_IPRB_REGOFS) + +#define SH7750_IPRB_WDT 0xF000 /* WDT interrupt priority */ +#define SH7750_IPRB_WDT_S 12 +#define SH7750_IPRB_REF 0x0F00 /* Memory Refresh unit interrupt + priority */ +#define SH7750_IPRB_REF_S 8 +#define SH7750_IPRB_SCI1 0x00F0 /* SCI1 interrupt priority */ +#define SH7750_IPRB_SCI1_S 4 + +/* Interrupt Priority Register ó - IPRó (half) */ +#define SH7750_IPRC_REGOFS 0xD00004 /* offset */ +#define SH7750_IPRC SH7750_P4_REG32(SH7750_IPRC_REGOFS) +#define SH7750_IPRC_A7 SH7750_A7_REG32(SH7750_IPRC_REGOFS) + +#define SH7750_IPRC_GPIO 0xF000 /* GPIO interrupt priority */ +#define SH7750_IPRC_GPIO_S 12 +#define SH7750_IPRC_DMAC 0x0F00 /* DMAC interrupt priority */ +#define SH7750_IPRC_DMAC_S 8 +#define SH7750_IPRC_SCIF 0x00F0 /* SCIF interrupt priority */ +#define SH7750_IPRC_SCIF_S 4 +#define SH7750_IPRC_HUDI 0x000F /* H-UDI interrupt priority */ +#define SH7750_IPRC_HUDI_S 0 + + +/* + * User Break Controller registers + */ +#define SH7750_BARA 0x200000 /* Break address regiser A */ +#define SH7750_BAMRA 0x200004 /* Break address mask regiser A */ +#define SH7750_BBRA 0x200008 /* Break bus cycle regiser A */ +#define SH7750_BARB 0x20000c /* Break address regiser B */ +#define SH7750_BAMRB 0x200010 /* Break address mask regiser B */ +#define SH7750_BBRB 0x200014 /* Break bus cycle regiser B */ +#define SH7750_BASRB 0x000018 /* Break ASID regiser B */ +#define SH7750_BDRB 0x200018 /* Break data regiser B */ +#define SH7750_BDMRB 0x20001c /* Break data mask regiser B */ +#define SH7750_BRCR 0x200020 /* Break control register */ + +#define SH7750_BRCR_UDBE 0x0001 /* User break debug enable bit */ + +/* + * Missing in RTEMS, added for QEMU + */ +#define SH7750_BCR3_A7 0x1f800050 +#define SH7750_BCR4_A7 0x1e0a00f0 +#define SH7750_PRECHARGE0_A7 0x1f900088 +#define SH7750_PRECHARGE1_A7 0x1f940088 + +#endif diff --git a/hw/shix.c b/hw/shix.c new file mode 100644 index 0000000000..9577c092c2 --- /dev/null +++ b/hw/shix.c @@ -0,0 +1,111 @@ +/* + * SHIX 2.0 board description + * + * Copyright (c) 2005 Samuel Tardieu + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +/* + Shix 2.0 board by Alexis Polti, described at + http://perso.enst.fr/~polti/realisations/shix20/ + + More information in target-sh4/README.sh4 +*/ +#include "vl.h" + +#define BIOS_FILENAME "shix_bios.bin" +#define BIOS_ADDRESS 0xA0000000 + +void DMA_run(void) +{ + /* XXXXX */ +} + +void irq_info(void) +{ + /* XXXXX */ +} + +void pic_set_irq(int irq, int level) +{ + /* XXXXX */ +} + +void pic_info() +{ + /* XXXXX */ +} + +void vga_update_display() +{ + /* XXXXX */ +} + +void vga_invalidate_display() +{ + /* XXXXX */ +} + +void vga_screen_dump(const char *filename) +{ + /* XXXXX */ +} + +void shix_init(int ram_size, int vga_ram_size, int boot_device, + DisplayState * ds, const char **fd_filename, int snapshot, + const char *kernel_filename, const char *kernel_cmdline, + const char *initrd_filename) +{ + int ret; + CPUState *env; + struct SH7750State *s; + + printf("Initializing CPU\n"); + env = cpu_init(); + + /* Allocate memory space */ + printf("Allocating ROM\n"); + cpu_register_physical_memory(0x00000000, 0x00004000, IO_MEM_ROM); + printf("Allocating SDRAM 1\n"); + cpu_register_physical_memory(0x08000000, 0x01000000, 0x00004000); + printf("Allocating SDRAM 2\n"); + cpu_register_physical_memory(0x0c000000, 0x01000000, 0x01004000); + + /* Load BIOS in 0 (and access it through P2, 0xA0000000) */ + printf("%s: load BIOS '%s'\n", __func__, BIOS_FILENAME); + ret = load_image(BIOS_FILENAME, phys_ram_base); + if (ret < 0) { /* Check bios size */ + fprintf(stderr, "ret=%d\n", ret); + fprintf(stderr, "qemu: could not load SHIX bios '%s'\n", + BIOS_FILENAME); + exit(1); + } + + /* Register peripherals */ + s = sh7750_init(env); + /* XXXXX Check success */ + tc58128_init(s, "shix_linux_nand.bin", NULL); + fprintf(stderr, "initialization terminated\n"); +} + +QEMUMachine shix_machine = { + "shix", + "shix card", + shix_init +}; diff --git a/hw/tc58128.c b/hw/tc58128.c new file mode 100644 index 0000000000..a8b26f7e8c --- /dev/null +++ b/hw/tc58128.c @@ -0,0 +1,181 @@ +#include <assert.h> +#include "vl.h" + +#define CE1 0x0100 +#define CE2 0x0200 +#define RE 0x0400 +#define WE 0x0800 +#define ALE 0x1000 +#define CLE 0x2000 +#define RDY1 0x4000 +#define RDY2 0x8000 +#define RDY(n) ((n) == 0 ? RDY1 : RDY2) + +typedef enum { WAIT, READ1, READ2, READ3 } state_t; + +typedef struct { + uint8_t *flash_contents; + state_t state; + uint32_t address; + uint8_t address_cycle; +} tc58128_dev; + +static tc58128_dev tc58128_devs[2]; + +#define FLASH_SIZE (16*1024*1024) + +void init_dev(tc58128_dev * dev, char *filename) +{ + int ret, blocks; + + dev->state = WAIT; + dev->flash_contents = qemu_mallocz(FLASH_SIZE); + memset(dev->flash_contents, 0xff, FLASH_SIZE); + if (!dev->flash_contents) { + fprintf(stderr, "could not alloc memory for flash\n"); + exit(1); + } + if (filename) { + /* Load flash image skipping the first block */ + ret = load_image(filename, dev->flash_contents + 528 * 32); + if (ret < 0) { + fprintf(stderr, "ret=%d\n", ret); + fprintf(stderr, "qemu: could not load flash image %s\n", + filename); + exit(1); + } else { + /* Build first block with number of blocks */ + blocks = (ret + 528 * 32 - 1) / (528 * 32); + dev->flash_contents[0] = blocks & 0xff; + dev->flash_contents[1] = (blocks >> 8) & 0xff; + dev->flash_contents[2] = (blocks >> 16) & 0xff; + dev->flash_contents[3] = (blocks >> 24) & 0xff; + fprintf(stderr, "loaded %d bytes for %s into flash\n", ret, + filename); + } + } +} + +void handle_command(tc58128_dev * dev, uint8_t command) +{ + switch (command) { + case 0xff: + fprintf(stderr, "reset flash device\n"); + dev->state = WAIT; + break; + case 0x00: + fprintf(stderr, "read mode 1\n"); + dev->state = READ1; + dev->address_cycle = 0; + break; + case 0x01: + fprintf(stderr, "read mode 2\n"); + dev->state = READ2; + dev->address_cycle = 0; + break; + case 0x50: + fprintf(stderr, "read mode 3\n"); + dev->state = READ3; + dev->address_cycle = 0; + break; + default: + fprintf(stderr, "unknown flash command 0x%02x\n", command); + assert(0); + } +} + +void handle_address(tc58128_dev * dev, uint8_t data) +{ + switch (dev->state) { + case READ1: + case READ2: + case READ3: + switch (dev->address_cycle) { + case 0: + dev->address = data; + if (dev->state == READ2) + dev->address |= 0x100; + else if (dev->state == READ3) + dev->address |= 0x200; + break; + case 1: + dev->address += data * 528 * 0x100; + break; + case 2: + dev->address += data * 528; + fprintf(stderr, "address pointer in flash: 0x%08x\n", + dev->address); + break; + default: + /* Invalid data */ + assert(0); + } + dev->address_cycle++; + break; + default: + assert(0); + } +} + +uint8_t handle_read(tc58128_dev * dev) +{ +#if 0 + if (dev->address % 0x100000 == 0) + fprintf(stderr, "reading flash at address 0x%08x\n", dev->address); +#endif + return dev->flash_contents[dev->address++]; +} + +/* We never mark the device as busy, so interrupts cannot be triggered + XXXXX */ + +int tc58128_cb(uint16_t porta, uint16_t portb, + uint16_t * periph_pdtra, uint16_t * periph_portadir, + uint16_t * periph_pdtrb, uint16_t * periph_portbdir) +{ + int dev; + + if ((porta & CE1) == 0) + dev = 0; + else if ((porta & CE2) == 0) + dev = 1; + else + return 0; /* No device selected */ + + if ((porta & RE) && (porta & WE)) { + /* Nothing to do, assert ready and return to input state */ + *periph_portadir &= 0xff00; + *periph_portadir |= RDY(dev); + *periph_pdtra |= RDY(dev); + return 1; + } + + if (porta & CLE) { + /* Command */ + assert((porta & WE) == 0); + handle_command(&tc58128_devs[dev], porta & 0x00ff); + } else if (porta & ALE) { + assert((porta & WE) == 0); + handle_address(&tc58128_devs[dev], porta & 0x00ff); + } else if ((porta & RE) == 0) { + *periph_portadir |= 0x00ff; + *periph_pdtra &= 0xff00; + *periph_pdtra |= handle_read(&tc58128_devs[dev]); + } else { + assert(0); + } + return 1; +} + +static sh7750_io_device tc58128 = { + RE | WE, /* Port A triggers */ + 0, /* Port B triggers */ + tc58128_cb /* Callback */ +}; + +int tc58128_init(struct SH7750State *s, char *zone1, char *zone2) +{ + init_dev(&tc58128_devs[0], zone1); + init_dev(&tc58128_devs[1], zone2); + return sh7750_register_io_device(s, &tc58128); +} |