summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-01-14xtensa: implement CPU hotplugMax Filippov8-4/+248
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add SMP supportMax Filippov24-199/+967
This is largely based on SMP code from the xtensa-2.6.29-smp tree by Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly other Tensilica folks). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add MX irqchipMax Filippov4-0/+75
MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clear timer IRQ unconditionally in its handlerMax Filippov1-0/+1
PIC irq_ack doesn't clear timer IRQ, because timer interrupt handler usually set up new timer by writing to ccompare register and thus clearing timer IRQ. However timer may not be set up in the IRQ handler, e.g. with tickless idle on SMP, or when CPU is going offline, leaving timer IRQ raised and making do_interrupt attempting to handle it forever. To fix this always write current value of ccompare SR chosen to be linux timer back to that SR on entry to timer interrupt handler. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clean up do_interrupt/do_IRQMax Filippov2-20/+9
- set up irq registers and call irq_enter/irq_exit once for each kernel entry due to interrupt; - don't attempt to clear current IRQ in the do_interrupt, IRQ handler will take care of it; - find pending interrupt with highest priority before every ISR invocation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move built-in PIC to drivers/irqchipMax Filippov3-108/+38
Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move init_mmu declaration to mmu_context.hMax Filippov2-6/+7
Secondary CPUs need this declaration to initialize their MMUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: call check_s32c1i after trap_initMax Filippov1-11/+7
Otherwise exceptions may occur prior to exception handling mechanism initialization, resulting in silently dead system. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: update clockevent setup for SMPMax Filippov1-25/+29
Provide per-cpu ccount_timer objects and use them appropriately. Extract per-cpu clockevent setup function. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: mark ccount as continuous clocksourceBaruch Siach1-0/+1
This allows ccount to be used as highres timer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: enable HAVE_IRQ_TIME_ACCOUNTINGMax Filippov1-0/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: fix __delay for small loop countMax Filippov1-3/+6
Avoid __delay counter underflow for loop counts < 2. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: fix arch spinlock function namesMax Filippov2-14/+37
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: fix build warning in 64-bit build environmentMax Filippov1-2/+2
This fixes the following build warnings: arch/xtensa/mm/misc.S: Assembler messages: arch/xtensa/mm/misc.S:143: Warning: value 0xffffffff30000106 truncated to 0x30000106 arch/xtensa/mm/misc.S:197: Warning: value 0xffffffff30000106 truncated to 0x30000106 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: remove NO_IRQ definitionsMax Filippov2-5/+0
These definitions (-1) were correct when used as a hardware IRQ number, but are incorrect as a mapped IRQ number. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: implement robust futex atomic uaccess opsBaruch Siach2-1/+147
This enables the set_robust_list(2) system call. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: clean up diagnostic, increase verbosityMax Filippov1-11/+12
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: always use fixed tuntap configMax Filippov1-14/+8
The code doesn't handle dynamic TAP interface allocation, so there's no point tracking this case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: enable iss_net_set_macMax Filippov1-3/+2
This allows changing MAC address of the device. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: drop IP setup, clean up MAC setupMax Filippov1-46/+31
Without proper MAC setup network device doesn't work. IP setup is redundant and may be done with 'ip=...' kernel parameter. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: init network interface name before the probeMax Filippov1-7/+7
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: fix command line parameter nameMax Filippov1-1/+1
Now 'ethX=...' syntax can actually be used in kernel command line to specify network interfaces. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: ISS: clean up iss-network driverMax Filippov1-124/+52
No functional changes, remove dead/unused code, clean checkpatch warnings, replace strlen of constant strings with sizeof. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: remove trailing colons in asm statementMax Filippov1-1/+1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clean up include/asm/vectors.hMax Filippov1-9/+3
- drop unused PHYSICAL_MEMORY_ADDRESS and XC_PADDR - fix NMI_VECTOR_VADDR and INTLEVEL7_VECTOR_VADDR definitions: there should be no XCHAL_ prefix in them; - fix the following warning seen with gcc-4.8.1: arch/xtensa/include/asm/vectors.h:71:5: warning: "XCHAL_HAVE_VECBASE" is not defined [-Wundef] Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-12-29Merge tag 'fixes-for-linus' of ↵Linus Torvalds8-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another smallish batch of fixes, it's been quiet due to the holidays. Nothing controversial here, a handful of things across the board" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: pxa: fix USB gadget driver compilation regression ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL ARM: shmobile: r8a7790: fix shdi resource sizes ARM: shmobile: bockw: fixup DMA mask ARM: shmobile: armadillo: Add PWM backlight power supply
2013-12-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "There is a small EFI fix and a big power regression fix in this batch. My queue also had a fix for downing a CPU when there are insufficient number of IRQ vectors available, but I'm holding that one for now due to recent bug reports" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't select EFI from certain special ACPI drivers x86 idle: Repair large-server 50-watt idle-power regression
2013-12-28Merge tag 'omap-for-v3.13/intc-ldp-fix' of ↵Olof Johansson39-169/+269
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Fix a regression for wrong interrupt numbers for some devices after the sparse IRQ conversion, fix DRA7 console output for earlyprintk, and fix the LDP LCD backlight when DSS is built into the kernel and not as a loadable module. * tag 'omap-for-v3.13/intc-ldp-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL + v3.13-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-28Merge tag 'renesas-fixes2-for-v3.13' of ↵Olof Johansson3-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Second Round of Renesas ARM based SoC Fixes for v3.13 * r8a7790 (R-Car H2) based Lager board - Correct SHDI resource sizes This bug has been present since sdhi resources were added to the r8a7790 by 8c9b1aa41853272a ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates") in v3.11-rc2. * r8a7778 (R-Car M1) based Bock-W board - Correct DMA mask This resolves a regression introduced by 4dcfa60071b3d23f ("ARM: DMA-API: better handing of DMA masks for coherent allocations") in v3.12-rc1. * r8a7740 (R-Mobile A1) based Armadillo board - Add PWM backlight power supply This resolves a regression introduced by 22ceeee16eb8f0d0 ("pwm-backlight: Add power supply support") in v3.12. * tag 'renesas-fixes2-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: fix shdi resource sizes ARM: shmobile: bockw: fixup DMA mask ARM: shmobile: armadillo: Add PWM backlight power supply Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-28ARM: pxa: fix USB gadget driver compilation regressionLinus Walleij1-0/+2
After commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" a compilation error was introduced in the PXA25x gadget driver. An attempt to fix the problem was made in commit b144e4ab1ef130e8bf30bcd3e529b7f35112c503 "usb: gadget: fix pxa25x compilation problems" by explictly stating the driver needs the <mach/hardware.h> header, which solved the compilation for a few boards, such as the pxa255-idp and its defconfig. However the Lubbock board has this special clause in drivers/usb/gadget/pxa25x_udc.c: This include file has an implicit dependency on <mach/irqs.h> having been included before <mach/lubbock.h> was included. Before commit 88f718e3fa4d67f3a8dbe79a2f97d722323e4051 "ARM: pxa: delete the custom GPIO header" this implicit dependency for the pxa25x_udc compile on the Lubbock was satisfied by <linux/gpio.h> implicitly including <mach/gpio.h> which was in turn including <mach/irqs.h>, apart from the earlier added <mach/hardware.h>. Fix this by having the PXA25x <mach/lubbock.h> explicitly include <mach/irqs.h>. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-27Merge tag 'for-v3.13-rc/hwmod-fixes-b' of ↵Tony Lindgren3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into debug-ll-and-ldp-backlight-fix A few OMAP hwmod fixes for v3.13-rc. One patch fixes some IRQ problems with GPMC, RNG, and ISP/IVA MMUs on OMAP2/3. The other fixes some problems with DEBUG_LL on DRA7xx. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod_fixes_b_v3.13-rc/20131226021920/
2013-12-27ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy bootingTony Lindgren1-1/+6
Looks like the LCD panel on LDP has been broken quite a while, and recently got fixed by commit 0b2aa8bed3e1 (gpio: twl4030: Fix regression for twl gpio output). However, there's still an issue left where the panel backlight does not come on if the LCD drivers are built into the kernel. Fix the issue by registering the DPI LCD panel only after the twl4030 GPIO has probed. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [tony@atomide.com: updated per Tomi's comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-25ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq dataSuman Anna2-5/+5
Commit 7d7e1eb (ARM: OMAP2+: Prepare for irqs.h removal) and commit ec2c082 (ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ) updated the way interrupts for OMAP2/3 devices are defined in the HWMOD data structures to being an index plus a fixed offset (defined by OMAP_INTC_START). Couple of irqs in the OMAP2/3 hwmod data were misconfigured completely as they were missing this OMAP_INTC_START relative offset. Add this offset back to fix the incorrect irq data for the following modules: OMAP2 - GPMC, RNG OMAP3 - GPMC, ISP MMU & IVA MMU Signed-off-by: Suman Anna <s-anna@ti.com> Fixes: 7d7e1eba7e92 ("ARM: OMAP2+: Prepare for irqs.h removal") Fixes: ec2c0825ca31 ("ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-12-25ARM: DRA7: hwmod: Fix boot crash with DEBUG_LLRajendra Nayak1-1/+1
With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL' we moved from parsing cmdline to identify uart used for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS. On DRA7 though, we seem to be missing this flag, and atleast on the DRA7 EVM where we use uart1 for console, boot fails with DEBUG_LL enabled. Reported-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> # on a different base Signed-off-by: Rajendra Nayak <rnayak@ti.com> Fixes: 7dedd346941d ("ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL") Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-12-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds4-23/+54
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Much smaller batch of fixes this week. Biggest one is a revert of an OMAP display change that removed some non-DT pinmux code that was still needed for 3.13 to get DSI displays to work. There's also a fix that resolves some misdescribed GPIO controller resources on shmobile. The rest are mostly smaller fixes, a couple of MAINTAINERS updates, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Revert "ARM: OMAP2+: Remove legacy mux code for display.c" MAINTAINERS: Add keystone clock drivers MAINTAINERS: Add keystone git tree information ARM: s3c64xx: dt: Fix boot failure due to double clock initialization ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
2013-12-20Merge tag 'arc-fixes-for-3.13-rc5' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Fix busted syscall table due to unistd header inclusion issue" * tag 'arc-fixes-for-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h
2013-12-20Merge tag 'arm64-fixes' of ↵Linus Torvalds1-20/+18
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 ptrace fix from Catalin Marinas. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events
2013-12-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-62/+112
Pull KVM fixes from Paolo Bonzini: "The PPC folks had a large amount of changes queued for 3.13, and now they are fixing the bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Don't drop low-order page address bits powerpc: book3s: kvm: Don't abuse host r2 in exit path powerpc/kvm/booke: Fix build break due to stack frame size warning KVM: PPC: Book3S: PR: Enable interrupts earlier KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu KVM: PPC: Book3S: PR: Don't clobber our exit handler id powerpc: kvm: fix rare but potential deadlock scene KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call KVM: PPC: Book3S HV: Make tbacct_lock irq-safe KVM: PPC: Book3S HV: Refine barriers in guest entry/exit KVM: PPC: Book3S HV: Fix physical address calculations
2013-12-20Merge tag 'renesas-fixes-for-v3.13' of ↵Kevin Hilman2-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Renesas ARM based SoC fixes for v3.13 * r8a7790 (R-Car H1) SoC - Correct GPIO resources in DT. This problem has been present since GPIOs were added to the r8a7790 SoC by f98e10c88aa95bf7 ("ARM: shmobile: r8a7790: Add GPIO controller devices to device tree") in v3.12-rc1. * irqchip renesas-intc-irqpin - Correct register bitfield shift calculation This bug has been present since the renesas-intc-irqpin driver was introduced by 443580486e3b9657 ("irqchip: Renesas INTC External IRQ pin driver") in v3.10-rc1 * Lager board - Do not build the phy fixup unless CONFIG_PHYLIB is enabled This problem was introduced by 48c8b96f21817aad * tag 'renesas-fixes-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20Merge tag 'signed-for-3.13' of git://github.com/agraf/linux-2.6 into kvm-masterPaolo Bonzini13-62/+112
Patch queue for 3.13 - 2013-12-18 This fixes some grave issues we've only found after 3.13-rc1: - Make the modularized HV/PR book3s kvm work well as modules - Fix some race conditions - Fix compilation with certain compilers (booke) - Fix THP for book3s_hv - Fix preemption for book3s_pr Alexander Graf (4): KVM: PPC: Book3S: PR: Don't clobber our exit handler id KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy KVM: PPC: Book3S: PR: Enable interrupts earlier Aneesh Kumar K.V (1): powerpc: book3s: kvm: Don't abuse host r2 in exit path Paul Mackerras (5): KVM: PPC: Book3S HV: Fix physical address calculations KVM: PPC: Book3S HV: Refine barriers in guest entry/exit KVM: PPC: Book3S HV: Make tbacct_lock irq-safe KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call KVM: PPC: Book3S HV: Don't drop low-order page address bits Scott Wood (1): powerpc/kvm/booke: Fix build break due to stack frame size warning pingfan liu (1): powerpc: kvm: fix rare but potential deadlock scene
2013-12-20Merge tag 'stable/for-linus-3.13-rc4-tag' of ↵Linus Torvalds2-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use scratch pages. - Fix block API header for ARM32 and ARM64 to have proper layout - On ARM when mapping guests, stick on PTE_SPECIAL - When using SWIOTLB under ARM, don't call swiotlb functions twice - When unmapping guests memory and if we fail, don't return pages which failed to be unmapped. - Grant driver was using the wrong address on ARM. * tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Seperate the auto-translate logic properly (v2) xen/block: Correctly define structures in public headers on ARM32 and ARM64 arm: xen: foreign mapping PTEs are special. xen/arm64: do not call the swiotlb functions twice xen: privcmd: do not return pages which we have failed to unmap XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
2013-12-20Merge tag 'omap-for-v3.13/display-fix' of ↵Kevin Hilman66-216/+204
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes I accidentally removed some mux code for omap4 that I thought was dead code as omap4 has been booting with device tree only since v3.10. Turns out I also removed some display related mux code, so let's revert that except for the dead code parts. * tag 'omap-for-v3.13/display-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (439 commits) Revert "ARM: OMAP2+: Remove legacy mux code for display.c" +Linux 3.13-rc4
2013-12-19x86 idle: Repair large-server 50-watt idle-power regressionLen Brown1-1/+2
Linux 3.10 changed the timing of how thread_info->flags is touched: x86: Use generic idle loop (7d1a941731fabf27e5fb6edbebb79fe856edb4e5) This caused Intel NHM-EX and WSM-EX servers to experience a large number of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote from deep C-states to shallow C-states, which caused these platforms to experience a significant increase in idle power. Note that this issue was already present before the commit above, however, it wasn't seen often enough to be noticed in power measurements. Here we extend an errata workaround from the Core2 EX "Dunnington" to extend to NHM-EX and WSM-EX, to prevent these immediate returns from MWAIT, reducing idle power on these platforms. While only acpi_idle ran on Dunnington, intel_idle may also run on these two newer systems. As of today, there are no other models that are known to need this tweak. Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com Signed-off-by: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-19arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled eventsWill Deacon1-20/+18
Commit 8f34a1da35ae ("arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints") fixed an issue with GDB trying to zero breakpoint control registers. The problem there is that the arch hw_breakpoint code will attempt to create a (disabled), execute breakpoint of length 0. This will fail validation and report unexpected failure to GDB. To avoid this, we treated disabled breakpoints as HW_BREAKPOINT_EMPTY, but that seems to have broken with recent kernels, causing watchpoints to be treated as TYPE_INST in the core code and returning ENOSPC for any further breakpoints. This patch fixes the problem by prioritising the `enable' field of the breakpoint: if it is cleared, we simply update the perf_event_attr to indicate that the thing is disabled and don't bother changing either the type or the length. This reinforces the behaviour that the breakpoint control register is essentially read-only apart from the enable bit when disabling a breakpoint. Cc: <stable@vger.kernel.org> Reported-by: Aaron Liu <liucy214@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-12-19ARC: Allow conditional multiple inclusion of uapi/asm/unistd.hVineet Gupta1-1/+7
Commit 97bc386fc12d "ARC: Add guard macro to uapi/asm/unistd.h" inhibited multiple inclusion of ARCH unistd.h. This however hosed the system since Generic syscall table generator relies on it being included twice, and in lack-of an empty table was emitted by C preprocessor. Fix that by allowing one exception to rule for the special case (just like Xtensa) Suggested-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-12-19ARM: shmobile: r8a7790: fix shdi resource sizesBen Dooks1-2/+2
The r8a7790.dtsi file has four sdhi nodes which the first two have the wrong resource size for their register block. This causes the sh_modbile_sdhi driver to fail to communicate with card at-all. Change sdhi{0,1} node size from 0x100 to 0x200 to correct these nodes as per Kuninori Morimoto's response to the original patch where all four nodes where changed. sdhi{2,3} are the correct size. This bug has been present since sdhi resources were added to the r8a7790 by 8c9b1aa41853272a ("ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates") in v3.11-rc2. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Tested-by: William Towle <william.towle@codethink.co.uk> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: bockw: fixup DMA maskKuninori Morimoto1-1/+1
4dcfa60071b3d23f0181f27d8519f12e37cefbb9 (ARM: DMA-API: better handing of DMA masks for coherent allocations) exchanged DMA mask check method. Below warning will appear without this patch asoc-simple-card asoc-simple-card.0: \ Coherent DMA mask 0xffffffffffffffff is larger than dma_addr_t allows asoc-simple-card asoc-simple-card.0: \ Driver did not use or check the return value from dma_set_coherent_mask()? Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: Add PWM backlight power supplyLaurent Pinchart1-0/+7
Commit 22ceeee16eb8f0d04de3ef43a5174fb30ec18af9 ("pwm-backlight: Add power supply support") added a mandatory power supply for the PWM backlight. Add a fixed 5V regulator to board code with a consumer supply entry for the backlight device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> (cherry picked from commit ad11cb9a5cf96346f1240995c672cdbb5501785c) Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-18sh: always link in helper functions extracted from libgccGeert Uytterhoeven1-1/+1
E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m: ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined! For "lib-y", if no symbols in a compilation unit are referenced by other units, the compilation unit will not be included in vmlinux. This breaks modules that do reference those symbols. Use "obj-y" instead to fix this. http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/ This doesn't fix all cases. There are others, e.g. udivsi3. This is also not limited to sh, many architectures handle this in the same way. A simple solution is to unconditionally include all helper functions. A more complex solution is to make the choice of "lib-y" or "obj-y" depend on CONFIG_MODULES: obj-$(CONFIG_MODULES) += ... lib-y($CONFIG_MODULES) += ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mundt <lethal@linux-sh.org> Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18mm: fix TLB flush race between migration, and change_protection_rangeRik van Riel2-4/+11
There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 03:04:50 +0000