diff options
| author | Paul Gortmaker <paul.gortmaker@windriver.com> | 2012-05-16 20:33:52 -0400 |
|---|---|---|
| committer | Paul Gortmaker <paul.gortmaker@windriver.com> | 2012-05-17 19:03:54 -0400 |
| commit | a88dc06cd515b3bb9dfa18606e88d0be9a5b6ddd (patch) | |
| tree | b5657c966fad7bb7f8259396bb304324916269e2 | |
| parent | d157be852f6c76dc467f3a03b89263880e14c513 (diff) | |
| download | kernel-common-a88dc06cd515b3bb9dfa18606e88d0be9a5b6ddd.tar.gz kernel-common-a88dc06cd515b3bb9dfa18606e88d0be9a5b6ddd.tar.bz2 kernel-common-a88dc06cd515b3bb9dfa18606e88d0be9a5b6ddd.zip | |
scsi: delete the MCA specific drivers and driver code
The support for CONFIG_MCA is being removed, since the 20
year old hardware simply isn't capable of meeting today's
software demands on CPU and memory resources.
This commit removes the MCA specific SCSI drivers, and the
MCA specific portions of code in dual role ISA/MCA drivers.
Also, the MCA specific SCSI documentation is removed.
Cc: James Bottomley <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| -rw-r--r-- | Documentation/scsi/00-INDEX | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ibmmca.txt | 1402 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-parameters.txt | 6 | ||||
| -rw-r--r-- | Documentation/scsi/scsi_mid_low_api.txt | 2 | ||||
| -rw-r--r-- | drivers/scsi/Kconfig | 83 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 2 | ||||
| -rw-r--r-- | drivers/scsi/aha1542.c | 66 | ||||
| -rw-r--r-- | drivers/scsi/fd_mcs.c | 1354 | ||||
| -rw-r--r-- | drivers/scsi/ibmmca.c | 2379 | ||||
| -rw-r--r-- | drivers/scsi/sim710.c | 124 |
10 files changed, 6 insertions, 5414 deletions
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index b7dd6502bec5..9b0787f965e9 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -56,8 +56,6 @@ g_NCR5380.txt - info on driver for NCR5380 and NCR53c400 based adapters hptiop.txt - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -ibmmca.txt - - info on driver for IBM adapters with MCA bus in2000.txt - info on in2000 driver libsas.txt diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt deleted file mode 100644 index ac41a9fcac77..000000000000 --- a/Documentation/scsi/ibmmca.txt +++ /dev/null @@ -1,1402 +0,0 @@ - - -=< The IBM Microchannel SCSI-Subsystem >=- - - for the IBM PS/2 series - - Low Level Software-Driver for Linux - - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Originally written by Martin Kolinek, December 1995. - Officially modified and maintained by Michael Lang since January 1999. - - Version 4.0a - - Last update: January 3, 2001 - - Before you Start - ---------------- - This is the common README.ibmmca file for all driver releases of the - IBM MCA SCSI driver for Linux. Please note, that driver releases 4.0 - or newer do not work with kernel versions older than 2.4.0, while driver - versions older than 4.0 do not work with kernels 2.4.0 or later! If you - try to compile your kernel with the wrong driver source, the - compilation is aborted and you get a corresponding error message. This is - no bug in the driver; it prevents you from using the wrong source code - with the wrong kernel version. - - Authors of this Driver - ---------------------- - - Chris Beauregard (improvement of the SCSI-device mapping by the driver) - - Martin Kolinek (origin, first release of this driver) - - Klaus Kudielka (multiple SCSI-host management/detection, adaption to - Linux Kernel 2.1.x, module support) - - Michael Lang (assigning original pun/lun mapping, dynamical ldn - assignment, rewritten adapter detection, this file, - patches, official driver maintenance and subsequent - debugging, related with the driver) - - Table of Contents - ----------------- - 1 Abstract - 2 Driver Description - 2.1 IBM SCSI-Subsystem Detection - 2.2 Physical Units, Logical Units, and Logical Devices - 2.3 SCSI-Device Recognition and dynamical ldn Assignment - 2.4 SCSI-Device Order - 2.5 Regular SCSI-Command-Processing - 2.6 Abort & Reset Commands - 2.7 Disk Geometry - 2.8 Kernel Boot Option - 2.9 Driver Module Support - 2.10 Multiple Hostadapter Support - 2.11 /proc/scsi-Filesystem Information - 2.12 /proc/mca-Filesystem Information - 2.13 Supported IBM SCSI-Subsystems - 2.14 Linux Kernel Versions - 3 Code History - 4 To do - 5 Users' Manual - 5.1 Commandline Parameters - 5.2 Troubleshooting - 5.3 Bug reports - 5.4 Support WWW-page - 6 References - 7 Credits to - 7.1 People - 7.2 Sponsors & Supporters - 8 Trademarks - 9 Disclaimer - - * * * - - 1 Abstract - ---------- - This README-file describes the IBM SCSI-subsystem low level driver for - Linux. The descriptions which were formerly kept in the source code have - been taken out of this file to simplify the codes readability. The driver - description has been updated, as most of the former description was already - quite outdated. The history of the driver development is also kept inside - here. Multiple historical developments have been summarized to shorten the - text size a bit. At the end of this file you can find a small manual for - this driver and hints to get it running on your machine. - - 2 Driver Description - -------------------- - 2.1 IBM SCSI-Subsystem Detection - -------------------------------- - This is done in the ibmmca_detect() function. It first checks, if the - Microchannel-bus support is enabled, as the IBM SCSI-subsystem needs the - Microchannel. In a next step, a free interrupt is chosen and the main - interrupt handler is connected to it to handle answers of the SCSI- - subsystem(s). If the F/W SCSI-adapter is forced by the BIOS to use IRQ11 - instead of IRQ14, IRQ11 is used for the IBM SCSI-2 F/W adapter. In a - further step it is checked, if the adapter gets detected by force from - the kernel commandline, where the I/O port and the SCSI-subsystem id can - be specified. The next step checks if there is an integrated SCSI-subsystem - installed. This register area is fixed through all IBM PS/2 MCA-machines - and appears as something like a virtual slot 10 of the MCA-bus. On most - PS/2 machines, the POS registers of slot 10 are set to 0xff or 0x00 if not - integrated SCSI-controller is available. But on certain PS/2s, like model - 9595, this slot 10 is used to store other information which at earlier - stage confused the driver and resulted in the detection of some ghost-SCSI. - If POS-register 2 and 3 are not 0x00 and not 0xff, but all other POS - registers are either 0xff or 0x00, there must be an integrated SCSI- - subsystem present and it will be registered as IBM Integrated SCSI- - Subsystem. The next step checks, if there is a slot-adapter installed on - the MCA-bus. To get this, the first two POS-registers, that represent the - adapter ID are checked. If they fit to one of the ids, stored in the - adapter list, a SCSI-subsystem is assumed to be found in a slot and will be - registered. This check is done through all possible MCA-bus slots to allow - more than one SCSI-adapter to be present in the PS/2-system and this is - already the first point of problems. Looking into the technical reference - manual for the IBM PS/2 common interfaces, the POS2 register must have - different interpretation of its single bits to avoid overlapping I/O - regions. While one can assume, that the integrated subsystem has a fix - I/O-address at 0x3540 - 0x3547, further installed IBM SCSI-adapters must - use a different I/O-address. This is expressed by bit 1 to 3 of POS2 - (multiplied by 8 + 0x3540). Bits 2 and 3 are reserved for the integrated - subsystem, but not for the adapters! The following list shows, how the - bits of POS2 and POS3 should be interpreted. - - The POS2-register of all PS/2 models' integrated SCSI-subsystems has the - following interpretation of bits: - Bit 7 - 4 : Chip Revision ID (Release) - Bit 3 - 2 : Reserved - Bit 1 : 8k NVRAM Disabled - Bit 0 : Chip Enable (EN-Signal) - The POS3-register is interpreted as follows (for most IBM SCSI-subsys.): - Bit 7 - 5 : SCSI ID - Bit 4 - 0 : Reserved = 0 - The slot-adapters have different interpretation of these bits. The IBM SCSI - adapter (w/Cache) and the IBM SCSI-2 F/W adapter use the following - interpretation of the POS2 register: - Bit 7 - 4 : ROM Segment Address Select - Bit 3 - 1 : Adapter I/O Address Select (*8+0x3540) - Bit 0 : Adapter Enable (EN-Signal) - and for the POS3 register: - Bit 7 - 5 : SCSI ID - Bit 4 : Fairness Enable (SCSI ID3 f. F/W) - Bit 3 - 0 : Arbitration Level - The most modern product of the series is the IBM SCSI-2 F/W adapter, it - allows dual-bus SCSI and SCSI-wide addressing, which means, PUNs may be - between 0 and 15. Here, Bit 4 is the high-order bit of the 4-bit wide - adapter PUN expression. In short words, this means, that IBM PS/2 machines - can only support 1 single integrated subsystem by default. Additional - slot-adapters get ports assigned by the automatic configuration tool. - - One day I found a patch in ibmmca_detect(), forcing the I/O-address to be - 0x3540 for integrated SCSI-subsystems, there was a remark placed, that on - integrated IBM SCSI-subsystems of model 56, the POS2 register was showing 5. - This means, that really for these models, POS2 has to be interpreted - sticking to the technical reference guide. In this case, the bit 2 (4) is - a reserved bit and may not be interpreted. These differences between the - adapters and the integrated controllers are taken into account by the - detection routine of the driver on from version >3.0g. - - Every time, a SCSI-subsystem is discovered, the ibmmca_register() function - is called. This function checks first, if the requested area for the I/O- - address of this SCSI-subsystem is still available and assigns this I/O- - area to the SCSI-subsystem. There are always 8 sequential I/O-addresses - taken for each individual SCSI-subsystem found, which are: - - Offset Type Permissions - 0 Command Interface Register 1 Read/Write - 1 Command Interface Register 2 Read/Write - 2 Command Interface Register 3 Read/Write - 3 Command Interface Register 4 Read/Write - 4 Attention Register Read/Write - 5 Basic Control Register Read/Write - 6 Interrupt Status Register Read - 7 Basic Status Register Read - - After the I/O-address range is assigned, the host-adapter is assigned - to a local structure which keeps all adapter information needed for the - driver itself and the mid- and higher-level SCSI-drivers. The SCSI pun/lun - and the adapters' ldn tables are initialized and get probed afterwards by - the check_devices() function. If no further adapters are found, - ibmmca_detect() quits. - - 2.2 Physical Units, Logical Units, and Logical Devices - ------------------------------------------------------ - There can be up to 56 devices on the SCSI bus (besides the adapter): - there are up to 7 "physical units" (each identified by physical unit - number or pun, also called the scsi id, this is the number you select - with hardware jumpers), and each physical unit can have up to 8 - "logical units" (each identified by logical unit number, or lun, - between 0 and 7). The IBM SCSI-2 F/W adapter offers this on up to two - busses and provides support for 30 logical devices at the same time, where - in wide-addressing mode you can have 16 puns with 32 luns on each device. - This section describes the handling of devices on non-F/W adapters. - Just imagine, that you can have 16 * 32 = 512 devices on a F/W adapter - which means a lot of possible devices for such a small machine. - - Typically the adapter has pun=7, so puns of other physical units - are between 0 and 6(15). On a wide-adapter a pun higher than 7 is - possible, but is normally not used. Almost all physical units have only - one logical unit, with lun=0. A CD-ROM jukebox would be an example of a - physical unit with more than one logical unit. - - The embedded microprocessor of the IBM SCSI-subsystem hides the complex - two-dimensional (pun,lun) organization from the operating system. - When the machine is powered-up (or rebooted), the embedded microprocessor - checks, on its own, all 56 possible (pun,lun) combinations, and the first - 15 devices found are assigned into a one-dimensional array of so-called - "logical devices", identified by "logical device numbers" or ldn. The last - ldn=15 is reserved for the subsystem itself. Wide adapters may have - to check up to 15 * 8 = 120 pun/lun combinations. - - 2.3 SCSI-Device Recognition and Dynamical ldn Assignment - -------------------------------------------------------- - One consequence of information hiding is that the real (pun,lun) - numbers are also hidden. The two possibilities to get around this problem - are to offer fake pun/lun combinations to the operating system or to - delete the whole mapping of the adapter and to reassign the ldns, using - the immediate assign command of the SCSI-subsystem for probing through - all possible pun/lun combinations. An ldn is a "logical device number" - which is used by IBM SCSI-subsystems to access some valid SCSI-device. - At the beginning of the development of this driver, the following approach - was used: - - First, the driver checked the ldn's (0 to 6) to find out which ldn's - have devices assigned. This was done by the functions check_devices() and - device_exists(). The interrupt handler has a special paragraph of code - (see local_checking_phase_flag) to assist in the checking. Assume, for - example, that three logical devices were found assigned at ldn 0, 1, 2. - These are presented to the upper layer of Linux SCSI driver - as devices with bogus (pun, lun) equal to (0,0), (1,0), (2,0). - On the other hand, if the upper layer issues a command to device - say (4,0), this driver returns DID_NO_CONNECT error. - - In a second step of the driver development, the following improvement has - been applied: The first approach limited the number of devices to 7, far - fewer than the 15 that it could use, then it just mapped ldn -> - (ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns - and luns, but it all seemed to work. - - The latest development, which is implemented from the driver version 3.0 - and later, realizes the device recognition in the following way: - The physical SCSI-devices on the SCSI-bus are probed via immediate_assign- - and device_inquiry-commands, that is all implemented in a completely new - made check_devices() subroutine. This delivers an exact map of the physical - SCSI-world that is now stored in the get_scsi[][]-array. This means, - that the once hidden pun,lun assignment is now known to this driver. - It no longer believes in default-settings of the subsystem and maps all - ldns to existing pun,lun "by foot". This assures full control of the ldn - mapping and allows dynamical remapping of ldns to different pun,lun, if - there are more SCSI-devices installed than ldns available (n>15). The - ldns from 0 to 6 get 'hardwired' by this driver to puns 0 to 7 at lun=0, - excluding the pun of the subsystem. This assures, that at least simple - SCSI-installations have optimum access-speed and are not touched by - dynamical remapping. The ldns 7 to 14 are put to existing devices with - lun>0 or to non-existing devices, in order to satisfy the subsystem, if - there are less than 15 SCSI-devices connected. In the case of more than 15 - devices, the dynamical mapping goes active. If the get_scsi[][] reports a - device to be existent, but it has no ldn assigned, it gets an ldn out of 7 - to 14. The numbers are assigned in cyclic order, therefore it takes 8 - dynamical reassignments on the SCSI-devices until a certain device - loses its ldn again. This assures that dynamical remapping is avoided - during intense I/O between up to 15 SCSI-devices (means pun,lun - combinations). A further advantage of this method is that people who - build their kernel without probing on all luns will get what they expect, - because the driver just won't assign everything with lun>0 when - multiple lun probing is inactive. - - 2.4 SCSI-Device Order - --------------------- - Because of the now correct recognition of physical pun,lun, and - their report to mid-level- and higher-level-drivers, the new reported puns - can be different from the old, faked puns. Therefore, Linux will eventually - change /dev/sdXXX assignments and prompt you for corrupted superblock - repair on boottime. In this case DO NOT PANIC, YOUR DISKS ARE STILL OK!!! - You have to reboot (CTRL-D) with an old kernel and set the /etc/fstab-file - entries right. After that, the system should come up as errorfree as before. - If your boot-partition is not coming up, also edit the /etc/lilo.conf-file - in a Linux session booted on old kernel and run lilo before reboot. Check - lilo.conf anyway to get boot on other partitions with foreign OSes right - again. But there exists a feature of this driver that allows you to change - the assignment order of the SCSI-devices by flipping the PUN-assignment. - See the next paragraph for a description. - - The problem for this is, that Linux does not assign the SCSI-devices in the - way as described in the ANSI-SCSI-standard. Linux assigns /dev/sda to - the device with at minimum id 0. But the first drive should be at id 6, - because for historical reasons, drive at id 6 has, by hardware, the highest - priority and a drive at id 0 the lowest. IBM was one of the rare producers, - where the BIOS assigns drives belonging to the ANSI-SCSI-standard. Most - other producers' BIOS does not (I think even Adaptec-BIOS). The - IBMMCA_SCSI_ORDER_STANDARD flag, which you set while configuring the - kernel enables to choose the preferred way of SCSI-device-assignment. - Defining this flag would result in Linux determining the devices in the - same order as DOS and OS/2 does on your MCA-machine. This is also standard - on most industrial computers and OSes, like e.g. OS-9. Leaving this flag - undefined will get your devices ordered in the default way of Linux. See - also the remarks of Chris Beauregard from Dec 15, 1997 and the followups - in section 3. - - 2.5 Regular SCSI-Command-Processing - ----------------------------------- - Only three functions get involved: ibmmca_queuecommand(), issue_cmd(), - and interrupt_handler(). - - The upper layer issues a scsi command by calling function - ibmmca_queuecommand(). This function fills a "subsystem control block" - (scb) and calls a local function issue_cmd(), which writes a scb - command into subsystem I/O ports. Once the scb command is carried out, - the interrupt_handler() is invoked. If a device is determined to be - existent and it has not assigned any ldn, it gets one dynamically. - For this, the whole stuff is done in ibmmca_queuecommand(). - - 2.6 Abort & Reset Commands - -------------------------- - These are implemented with busy waiting for interrupt to arrive. - ibmmca_reset() and ibmmca_abort() do not work sufficiently well - up to now and need still a lot of development work. This seems - to be a problem with other low-level SCSI drivers too, however - this should be no excuse. - - 2.7 Disk Geometry - ----------------- - The ibmmca_biosparams() function should return the same disk geometry - as the bios. This is needed for fdisk, etc. The returned geometry is - certainly correct for disks smaller than 1 gigabyte. In the meantime, - it has been proved, that this works fine even with disks larger than - 1 gigabyte. - - 2.8 Kernel Boot Option - ---------------------- - The function ibmmca_scsi_setup() is called if option ibmmcascsi=n - is passed to the kernel. See file linux/init/main.c for details. - - 2.9 Driver Module Support - ------------------------- - Is implemented and tested by K. Kudielka. This could probably not work - on kernels <2.1.0. - - 2.10 Multiple Hostadapter Support - --------------------------------- - This driver supports up to eight interfaces of type IBM-SCSI-Subsystem. - Integrated-, and MCA-adapters are automatically recognized. Unrecognizable - IBM-SCSI-Subsystem interfaces can be specified as kernel-parameters. - - 2.11 /proc/scsi-Filesystem Information - -------------------------------------- - Information about the driver condition is given in - /proc/scsi/ibmmca/<host_no>. ibmmca_proc_info() provides this information. - - This table is quite informative for interested users. It shows the load - of commands on the subsystem and whether you are running the bypassed - (software) or integrated (hardware) SCSI-command set (see below). The - amount of accesses is shown. Read, write, modeselect is shown separately - in order to help debugging problems with CD-ROMs or tapedrives. - - The following table shows the list of 15 logical device numbers, that are - used by the SCSI-subsystem. The load on each ldn is shown in the table, - again, read and write commands are split. The last column shows the amount - of reassignments, that have been applied to the ldns, if you have more than - 15 pun/lun combinations available on the SCSI-bus. - - The last two tables show the pun/lun map and the positions of the ldns - on this pun/lun map. This may change during operation, when a ldn is - reassigned to another pun/lun combination. If the necessity for dynamical - assignments is set to 'no', the ldn structure keeps static. - - 2.12 /proc/mca-Filesystem Information - ------------------------------------- - The slot-file contains all default entries and in addition chip and I/O- - address information of the SCSI-subsystem. This information is provided - by ibmmca_getinfo(). - - 2.13 Supported IBM SCSI-Subsystems - ---------------------------------- - The following IBM SCSI-subsystems are supported by this driver: - - - IBM Fast/Wide SCSI-2 Adapter - - IBM 7568 Industrial Computer SCSI Adapter w/Cache - - IBM Expansion Unit SCSI Controller - - IBM SCSI Adapter w/Cache - - IBM SCSI Adapter - - IBM Integrated SCSI Controller - - All clones, 100% compatible with the chipset and subsystem command - system of IBM SCSI-adapters (forced detection) - - 2.14 Linux Kernel Versions - -------------------------- - The IBM SCSI-subsystem low level driver is prepared to be used with - all versions of Linux between 2.0.x and 2.4.x. The compatibility checks - are fully implemented up from version 3.1e of the driver. This means, that - you just need the latest ibmmca.h and ibmmca.c file and copy it in the - linux/drivers/scsi directory. The code is automatically adapted during - kernel compilation. This is different from kernel 2.4.0! Here version - 4.0 or later of the driver must be used for kernel 2.4.0 or later. Version - 4.0 or later does not work together with older kernels! Driver versions - older than 4.0 do not work together with kernel 2.4.0 or later. They work - on all older kernels. - - 3 Code History - -------------- - Jan 15 1996: First public release. - - Martin Kolinek - - Jan 23 1996: Scrapped code which reassigned scsi devices to logical - device numbers. Instead, the existing assignment (created - when the machine is powered-up or rebooted) is used. - A side effect is that the upper layer of Linux SCSI - device driver gets bogus scsi ids (this is benign), - and also the hard disks are ordered under Linux the - same way as they are under dos (i.e., C: disk is sda, - D: disk is sdb, etc.). - - Martin Kolinek - - I think that the CD-ROM is now detected only if a CD is - inside CD_ROM while Linux boots. This can be fixed later, - once the driver works on all types of PS/2's. - - Martin Kolinek - - Feb 7 1996: Modified biosparam function. Fixed the CD-ROM detection. - For now, devices other than harddisk and CD_ROM are - ignored. Temporarily modified abort() function - to behave like reset(). - - Martin Kolinek - - Mar 31 1996: The integrated scsi subsystem is correctly found - in PS/2 models 56,57, but not in model 76. Therefore - the ibmmca_scsi_setup() function has been added today. - This function allows the user to force detection of - scsi subsystem. The kernel option has format - ibmmcascsi=n - where n is the scsi_id (pun) of the subsystem. Most likely, n is 7. - - Martin Kolinek - - Aug 21 1996: Modified the code which maps ldns to (pun,0). It was - insufficient for those of us with CD-ROM changers. - - Chris Beauregard - - Dec 14 1996: More improvements to the ldn mapping. See check_devices - for details. Did more fiddling with the integrated SCSI detection, - but I think it's ultimately hopeless without actually testing the - model of the machine. The 56, 57, 76 and 95 (ultimedia) all have - different integrated SCSI register configurations. However, the 56 - and 57 are the only ones that have problems with forced detection. - - Chris Beauregard - - Mar 8-16 1997: Modified driver to run as a module and to support - multiple adapters. A structure, called ibmmca_hostdata, is now - present, containing all the variables, that were once only - available for one single adapter. The find_subsystem-routine has vanished. - The hardware recognition is now done in ibmmca_detect directly. - This routine checks for presence of MCA-bus, checks the interrupt - level and continues with checking the installed hardware. - Certain PS/2-models do not recognize a SCSI-subsystem automatically. - Hence, the setup defined by command-line-parameters is checked first. - Thereafter, the routine probes for an integrated SCSI-subsystem. - Finally, adapters are checked. This method has the advantage to cover all - possible combinations of multiple SCSI-subsystems on one MCA-board. Up to - eight SCSI-subsystems can be recognized and announced to the upper-level - drivers with this improvement. A set of defines made changes to other - routines as small as possible. - - Klaus Kudielka - - May 30 1997: (v1.5b) - 1) SCSI-command capability enlarged by the recognition of MODE_SELECT. - This needs the RD-Bit to be disabled on IM_OTHER_SCSI_CMD_CMD which - allows data to be written from the system to the device. It is a - necessary step to be allowed to set blocksize of SCSI-tape-drives and - the tape-speed, without confusing the SCSI-Subsystem. - 2) The recognition of a tape is included in the check_devices routine. - This is done by checking for TYPE_TAPE, that is already defined in - the kernel-scsi-environment. The markup of a tape is done in the - global ldn_is_tape[] array. If the entry on index ldn - is 1, there is a tapedrive connected. - 3) The ldn_is_tape[] array is necessary to distinguish between tape- and - other devices. Fixed blocklength devices should not cause a problem - with the SCB-command for read and write in the ibmmca_queuecommand - subroutine. Therefore, I only derivate the READ_XX, WRITE_XX for - the tape-devices, as recommended by IBM in this Technical Reference, - mentioned below. (IBM recommends to avoid using the read/write of the - subsystem, but the fact was, that read/write causes a command error from - the subsystem and this causes kernel-panic.) - 4) In addition, I propose to use the ldn instead of a fix char for the - display of PS2_DISK_LED_ON(). On 95, one can distinguish between the - devices that are accessed. It shows activity and easyfies debugging. - The tape-support has been tested with a SONY SDT-5200 and a HP DDS-2 - (I do not know yet the type). Optimization and CD-ROM audio-support, - I am working on ... - - Michael Lang - - June 19 1997: (v1.6b) - 1) Submitting the extra-array ldn_is_tape[] -> to the local ld[] - device-array. - 2) CD-ROM Audio-Play seems to work now. - 3) When using DDS-2 (120M) DAT-Tapes, mtst shows still density-code - 0x13 for ordinary DDS (61000 BPM) instead 0x24 for DDS-2. This appears - also on Adaptec 2940 adaptor in a PCI-System. Therefore, I assume that - the problem is independent of the low-level-driver/bus-architecture. - 4) Hexadecimal ldn on PS/2-95 LED-display. - 5) Fixing of the PS/2-LED on/off that it works right with tapedrives and - does not confuse the disk_rw_in_progress counter. - - Michael Lang - - June 21 1997: (v1.7b) - 1) Adding of a proc_info routine to inform in /proc/scsi/ibmmca/<host> the - outer-world about operational load statistics on the different ldns, - seen by the driver. Everybody that has more than one IBM-SCSI should - test this, because I only have one and cannot see what happens with more - than one IBM-SCSI hosts. - 2) Definition of a driver version-number to have a better recognition of - the source when there are existing too much releases that may confuse - the user, when reading about release-specific problems. Up to know, - I calculated the version-number to be 1.7. Because we are in BETA-test - yet, it is today 1.7b. - 3) Sorry for the heavy bug I programmed on June 19 1997! After that, the - CD-ROM did not work any more! The C7-command was a fake impression - I got while programming. Now, the READ and WRITE commands for CD-ROM are - no longer running over the subsystem, but just over - IM_OTHER_SCSI_CMD_CMD. On my observations (PS/2-95), now CD-ROM mounts - much faster(!) and hopefully all fancy multimedia-functions, like direct - digital recording from audio-CDs also work. (I tried it with cdda2wav - from the cdwtools-package and it filled up the harddisk immediately :-).) - To easify boolean logics, a further local device-type in ld[], called - is_cdrom has been included. - 4) If one uses a SCSI-device of unsupported type/commands, one - immediately runs into a kernel-panic caused by Command Error. To better - understand which SCSI-command caused the problem, I extended this - specific panic-message slightly. - - Michael Lang - - June 25 1997: (v1.8b) - 1) Some cosmetic changes for the handling of SCSI-device-types. - Now, also CD-Burners / WORMs and SCSI-scanners should work. For - MO-drives I have no experience, therefore not yet supported. - In logical_devices I changed from different type-variables to one - called 'device_type' where the values, corresponding to scsi.h, - of a SCSI-device are stored. - 2) There existed a small bug, that maps a device, coming after a SCSI-tape - wrong. Therefore, e.g. a CD-ROM changer would have been mapped wrong - -> problem removed. - 3) Extension of the logical_device structure. Now it contains also device, - vendor and revision-level of a SCSI-device for internal usage. - - Michael Lang - - June 26-29 1997: (v2.0b) - 1) The release number 2.0b is necessary because of the completely new done - recognition and handling of SCSI-devices with the adapter. As I got - from Chris the hint, that the subsystem can reassign ldns dynamically, - I remembered this immediate_assign-command, I found once in the handbook. - Now, the driver first kills all ldn assignments that are set by default - on the SCSI-subsystem. After that, it probes on all puns and luns for - devices by going through all combinations with immediate_assign and - probing for devices, using device_inquiry. The found physical(!) pun,lun - structure is stored in get_scsi[][] as device types. This is followed - by the assignment of all ldns to existing SCSI-devices. If more ldns - than devices are available, they are assigned to non existing pun,lun - combinations to satisfy the adapter. With this, the dynamical mapping - was possible to implement. (For further info see the text in the - source code and in the description below. Read the description - below BEFORE installing this driver on your system!) - 2) Changed the name IBMMCA_DRIVER_VERSION to IBMMCA_SCSI_DRIVER_VERSION. - 3) The LED-display shows on PS/2-95 no longer the ldn, but the SCSI-ID - (pun) of the accessed SCSI-device. This is now senseful, because the - pun known within the driver is exactly the pun of the physical device - and no longer a fake one. - 4) The /proc/scsi/ibmmca/<host_no> consists now of the first part, where - hit-statistics of ldns is shown and a second part, where the maps of - physical and logical SCSI-devices are displayed. This could be very - interesting, when one is using more than 15 SCSI-devices in order to - follow the dynamical remapping of ldns. - - Michael Lang - - June 26-29 1997: (v2.0b-1) - 1) I forgot to switch the local_checking_phase_flag to 1 and back to 0 - in the dynamical remapping part in ibmmca_queuecommand for the - device_exist routine. Sorry. - - Michael Lang - - July 1-13 1997: (v3.0b,c) - 1) Merging of the driver-developments of Klaus Kudielka and Michael Lang - in order to get a optimum and unified driver-release for the - IBM-SCSI-Subsystem-Adapter(s). - For people, using the Kernel-release >=2.1.0, module-support should - be no problem. For users, running under <2.1.0, module-support may not - work, because the methods have changed between 2.0.x and 2.1.x. - 2) Added some more effective statistics for /proc-output. - 3) Change typecasting at necessary points from (unsigned long) to - virt_to_bus(). - 4) Included #if... at special points to have specific adaption of the - driver to kernel 2.0.x and 2.1.x. It should therefore also run with - later releases. - 5) Magneto-Optical drives and medium-changers are also recognized, now. - Therefore, we have a completely gapfree recognition of all SCSI- - device-types, that are known by Linux up to kernel 2.1.31. - 6) The flag SCSI_IBMMCA_DEV_RESET has been inserted. If it is set within - the configuration, each connected SCSI-device will get a reset command - during boottime. This can be necessary for some special SCSI-devices. - This flag should be included in Config.in. - (See also the new Config.in file.) - Probable next improvement: bad disk handler. - - Michael Lang - - Sept 14 1997: (v3.0c) - 1) Some debugging and speed optimization applied. - - Michael Lang - - Dec 15, 1997 - - chrisb@truespectra.com - - made the front panel display thingy optional, specified from the - command-line via ibmmcascsi=display. Along the lines of the /LED - option for the OS/2 driver. - - fixed small bug in the LED display that would hang some machines. - - reversed ordering of the drives (using the - IBMMCA_SCSI_ORDER_STANDARD define). This is necessary for two main - reasons: - - users who've already installed Linux won't be screwed. Keep - in mind that not everyone is a kernel hacker. - - be consistent with the BIOS ordering of the drives. In the - BIOS, id 6 is C:, id 0 might be D:. With this scheme, they'd be - backwards. This confuses the crap out of those heathens who've - got a impure Linux installation (which, <wince>, I'm one of). - This whole problem arises because IBM is actually non-standard with - the id to BIOS mappings. You'll find, in fdomain.c, a similar - comment about a few FD BIOS revisions. The Linux (and apparently - industry) standard is that C: maps to scsi id (0,0). Let's stick - with that standard. - - Since this is technically a branch of my own, I changed the - version number to 3.0e-cpb. - - Jan 17, 1998: (v3.0f) - 1) Addition of some statistical info for /proc in proc_info. - 2) Taking care of the SCSI-assignment problem, dealed by Chris at Dec 15 - 1997. In fact, IBM is right, concerning the assignment of SCSI-devices - to driveletters. It is conform to the ANSI-definition of the SCSI- - standard to assign drive C: to SCSI-id 6, because it is the highest - hardware priority after the hostadapter (that has still today by - default everywhere id 7). Also realtime-operating systems that I use, - like LynxOS and OS9, which are quite industrial systems use top-down - numbering of the harddisks, that is also starting at id 6. Now, one - sits a bit between two chairs. On one hand side, using the define - IBMMCA_SCSI_ORDER_STANDARD makes Linux assigning disks conform to - the IBM- and ANSI-SCSI-standard and keeps this driver downward - compatible to older releases, on the other hand side, people is quite - habituated in believing that C: is assigned to (0,0) and much other - SCSI-BIOS do so. Therefore, I moved the IBMMCA_SCSI_ORDER_STANDARD - define out of the driver and put it into Config.in as subitem of - 'IBM SCSI support'. A help, added to Documentation/Configure.help - explains the differences between saying 'y' or 'n' to the user, when - IBMMCA_SCSI_ORDER_STANDARD prompts, so the ordinary user is enabled to - choose the way of assignment, depending on his own situation and gusto. - 3) Adapted SCSI_IBMMCA_DEV_RESET to the local naming convention, so it is - now called IBMMCA_SCSI_DEV_RESET. - 4) Optimization of proc_info and its subroutines. - 5) Added more in-source-comments and extended the driver description by - some explanation about the SCSI-device-assignment problem. - - Michael Lang - - Jan 18, 1998: (v3.0g) - 1) Correcting names to be absolutely conform to the later 2.1.x releases. - This is necessary for - IBMMCA_SCSI_DEV_RESET -> CONFIG_IBMMCA_SCSI_DEV_RESET - IBMMCA_SCSI_ORDER_STANDARD -> CONFIG_IBMMCA_SCSI_ORDER_STANDARD - - Michael Lang - - Jan 18, 1999: (v3.1 MCA-team internal) - 1) The multiple hosts structure is accessed from every subroutine, so there - is no longer the address of the device structure passed from function - to function, but only the hostindex. A call by value, nothing more. This - should really be understood by the compiler and the subsystem should get - the right values and addresses. - 2) The SCSI-subsystem detection was not complete and quite hugely buggy up - to now, compared to the technical manual. The interpretation of the pos2 - register is not as assumed by people before, therefore, I dropped a note - in the ibmmca_detect function to show the registers' interpretation. - The pos-registers of integrated SCSI-subsystems do not contain any - information concerning the IO-port offset, really. Instead, they contain - some info about the adapter, the chip, the NVRAM .... The I/O-port is - fixed to 0x3540 - 0x3547. There can be more than one adapters in the - slots and they get an offset for the I/O area in order to get their own - I/O-address area. See chapter 2 for detailed description. At least, the - detection should now work right, even on models other than 95. The 95ers - came happily around the bug, as their pos2 register contains always 0 - in the critical area. Reserved bits are not allowed to be interpreted, - therefore, IBM is allowed to set those bits as they like and they may - really vary between different PS/2 models. So, now, no interpretation - of reserved bits - hopefully no trouble here anymore. - 3) The command error, which you may get on models 55, 56, 57, 70, 77 and - P70 may have been caused by the fact, that adapters of older design do - not like sending commands to non-existing SCSI-devices and will react - with a command error as a sign of protest. While this error is not - present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI - Adapters. Therefore, I implemented a workaround to forgive those - adapters their protests, but it is marked up in the statistics, so - after a successful boot, you can see in /proc/scsi/ibmmca/<host_number> - how often the command errors have been forgiven to the SCSI-subsystem. - If the number is bigger than 0, you have a SCSI subsystem of older - design, what should no longer matter. - 4) ibmmca_getinfo() has been adapted very carefully, so it shows in the - slotn file really, what is senseful to be presented. - 5) ibmmca_register() has been extended in its parameter list in order to - pass the right name of the SCSI-adapter to Linux. - - Michael Lang - - Feb 6, 1999: (v3.1) - 1) Finally, after some 3.1Beta-releases, the 3.1 release. Sorry, for - the delayed release, but it was not finished with the release of - Kernel 2.2.0. - - Michael Lang - - Feb 10, 1999 (v3.1) - 1) Added a new commandline parameter called 'bypass' in order to bypass - every integrated subsystem SCSI-command consequently in case of - troubles. - 2) Concatenated read_capacity requests to the harddisks. It gave a lot - of troubles with some controllers and after I wanted to apply some - extensions, it jumped out in the same situation, on my w/cache, as like - on D. Weinehalls' Model 56, having integrated SCSI. This gave me the - decisive hint to move the code-part out and declare it global. Now - it seems to work far better and more stable. Let us see what - the world thinks of it... - 3) By the way, only Sony DAT-drives seem to show density code 0x13. A - test with a HP drive gave right results, so the problem is vendor- - specific and not a problem of the OS or the driver. - - Michael Lang - - Feb 18, 1999 (v3.1d) - 1) The abort command and the reset function have been checked for - inconsistencies. From the logical point of thinking, they work - at their optimum, now, but as the subsystem does not answer with an - interrupt, abort never finishes, sigh... - 2) Everything, that is accessed by a busmaster request from the adapter - is now declared as global variable, even the return-buffer in the - local checking phase. This assures, that no accesses to undefined memory - areas are performed. - 3) In ibmmca.h, the line unchecked_isa_dma is added with 1 in order to - avoid memory-pointers for the areas higher than 16MByte in order to - be sure, it also works on 16-Bit Microchannel bus systems. - 4) A lot of small things have been found, but nothing that endangered the - driver operations. Just it should be more stable, now. - - Michael Lang - - Feb 20, 1999 (v3.1e) - 1) I took the warning from the Linux Kernel Hackers Guide serious and - checked the cmd->result return value to the done-function very carefully. - It is obvious, that the IBM SCSI only delivers the tsb.dev_status, if - some error appeared, else it is undefined. Now, this is fixed. Before - any SCB command gets queued, the tsb.dev_status is set to 0, so the - cmd->result won't screw up Linux higher level drivers. - 2) The reset-function has slightly improved. This is still planned for - abort. During the abort and the reset function, no interrupts are - allowed. This is however quite hard to cope with, so the INT-status - register is read. When the interrupt gets queued, one can find its - status immediately on that register and is enabled to continue in the - reset function. I had no chance to test this really, only in a bogus - situation, I got this function running, but the situation was too much - worse for Linux :-(, so tests will continue. - 3) Buffers got now consistent. No open address mapping, as before and - therefore no further troubles with the unassigned memory segmentation - faults that scrambled probes on 95XX series and even on 85XX series, - when the kernel is done in a not so perfectly fitting way. - 4) Spontaneous interrupts from the subsystem, appearing without any - command previously queued are answered with a DID_BAD_INTR result. - 5) Taken into account ZP Gus' proposals to reverse the SCSI-device - scan order. As it does not work on Kernel 2.1.x or 2.2.x, as proposed - by him, I implemented it in a slightly derived way, which offers in - addition more flexibility. - - Michael Lang - - Apr 23, 2000 (v3.2pre1) - 1) During a very long time, I collected a huge amount of bug reports from - various people, trying really quite different things on their SCSI- - PS/2s. Today, all these bug reports are taken into account and should be - mostly solved. The major topics were: - - Driver crashes during boottime by no obvious reason. - - Driver panics while the midlevel-SCSI-driver is trying to inquire - the SCSI-device properties, even though hardware is in perfect state. - - Displayed info for the various slot-cards is interpreted wrong. - The main reasons for the crashes were two: - 1) The commands to check for device information like INQUIRY, - TEST_UNIT_READY, REQUEST_SENSE and MODE_SENSE cause the devices - to deliver information of up to 255 bytes. Midlevel drivers offer - 1024 bytes of space for the answer, but the IBM-SCSI-adapters do - not accept this, as they stick quite near to ANSI-SCSI and report - a COMMAND_ERROR message which causes the driver to panic. The main - problem was located around the INQUIRY command. Now, for all the - mentioned commands, the buffersize sent to the adapter is at - maximum 255 which seems to be a quite reasonable solution. - TEST_UNIT_READY gets a buffersize of 0 to make sure that no - data is transferred in order to avoid any possible command failure. - 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send - a REQUEST_SENSE in order to see where the problem is located. This - REQUEST_SENSE may have various length in its answer-buffer. IBM - SCSI-subsystems report a command failure if the returned buffersize - is different from the sent buffersize, but this can be suppressed by - a special bit, which is now done and problems seem to be solved. - 2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on - 2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes. - 3) Commandline-parameters are recognized again, even under Kernel 2.3.x or - higher. - - Michael Lang - - April 27, 2000 (v3.2pre2) - 1) Bypassed commands get read by the adapter by one cycle instead of two. - This increases SCSI-performance. - 2) Synchronous datatransfer is provided for sure to be 5 MHz on older - SCSI and 10 MHz on internal F/W SCSI-adapter. - 3) New commandline parameters allow to force the adapter to slow down while - in synchronous transfer. Could be helpful for very old devices. - - Michael Lang - - June 2, 2000 (v3.2pre5) - 1) Added Jim Shorney's contribution to make the activity indicator - flashing in addition to the LED-alphanumeric display-panel on - models 95A. To be enabled to choose this feature freely, a new - commandline parameter is added, called 'activity'. - 2) Added the READ_CONTROL bit for test_unit_ready SCSI-command. - 3) Added some suppress_exception bits to read_device_capacity and - all device_inquiry occurrences in the driver code. - 4) Complaints about the various KERNEL_VERSION implementations are - taken into account. Every local_LinuxKernelVersion occurrence is - now replaced by KERNEL_VERSION, defined in linux/version.h. - Corresponding changes were applied to ibmmca.h, too. This was a - contribution to all kernel-parts by Philipp Hahn. - - Michael Lang - - July 17, 2000 (v3.2pre8) - A long period of collecting bug reports from all corners of the world - now lead to the following corrections to the code: - 1) SCSI-2 F/W support crashed with a COMMAND ERROR. The reason for this - was that it is possible to disable Fast-SCSI for the external bus. - The feature-control command, where this crash appeared regularly, tried - to set the maximum speed of 10MHz synchronous transfer speed and that - reports a COMMAND ERROR if external bus Fast-SCSI is disabled. Now, - the feature-command probes down from maximum speed until the adapter - stops to complain, which is at the same time the maximum possible - speed selected in the reference program. So, F/W external can run at - 5 MHz (slow-) or 10 MHz (fast-SCSI). During feature probing, the - COMMAND ERROR message is used to detect if the adapter does not complain. - 2) Up to now, only combined busmode is supported, if you use external - SCSI-devices, attached to the F/W-controller. If dual bus is selected, - only the internal SCSI-devices get accessed by Linux. For most - applications, this should do fine. - 3) Wide-SCSI-addressing (16-Bit) is now possible for the internal F/W - bus on the F/W adapter. If F/W adapter is detected, the driver - automatically uses the extended PUN/LUN <-> LDN mapping tables, which - are now new from 3.2pre8. This allows PUNs between 0 and 15 and should - provide more fun with the F/W adapter. - 4) Several machines use the SCSI: POS registers for internal/undocumented - storage of system relevant info. This confused the driver, mainly on - models 9595, as it expected no onboard SCSI only, if all POS in - the integrated SCSI-area are set to 0x00 or 0xff. Now, the mechanism - to check for integrated SCSI is much more restrictive and these problems - should be history. - - Michael Lang - - July 18, 2000 (v3.2pre9) - This develop rather quickly at the moment. Two major things were still - missing in 3.2pre8: - 1) The adapter PUN for F/W adapters has 4-bits, while all other adapters - have 3-bits. This is now taken into account for F/W. - 2) When you select CONFIG_IBMMCA_SCSI_ORDER_STANDARD, you should - normally get the inverse probing order of your devices on the SCSI-bus. - The ANSI device order gets scrambled in version 3.2pre8!! Now, a new - and tested algorithm inverts the device-order on the SCSI-bus and - automatically avoids accidental access to whatever SCSI PUN the adapter - is set and works with SCSI- and Wide-SCSI-addressing. - - Michael Lang - - July 23, 2000 (v3.2pre10 unpublished) - 1) LED panel display supports wide-addressing in ibmmca=display mode. - 2) Adapter-information and autoadaption to address-space is done. - 3) Auto-probing for maximum synchronous SCSI transfer rate is working. - 4) Optimization to some embedded function calls is applied. - 5) Added some comment for the user to wait for SCSI-devices being probed. - 6) Finished version 3.2 for Kernel 2.4.0. It least, I thought it is but... - - Michael Lang - - July 26, 2000 (v3.2pre11) - 1) I passed a horrible weekend getting mad with NMIs on kernel 2.2.14 and - a model 9595. Asking around in the community, nobody except of me has - seen such errors. Weird, but I am trying to recompile everything on - the model 9595. Maybe, as I use a specially modified gcc, that could - cause problems. But, it was not the reason. The true background was, - that the kernel was compiled for i386 and the 9595 has a 486DX-2. - Normally, no troubles should appear, but for this special machine, - only the right processor support is working fine! - 2) Previous problems with synchronous speed, slowing down from one adapter - to the next during probing are corrected. Now, local variables store - the synchronous bitmask for every single adapter found on the MCA bus. - 3) LED alphanumeric panel support for XX95 systems is now showing some - alive rotator during boottime. This makes sense, when no monitor is - connected to the system. You can get rid of all display activity, if - you do not use any parameter or just ibmmcascsi=activity, for the - harddrive activity LED, existent on all PS/2, except models 8595-XXX. - If no monitor is available, please use ibmmcascsi=display, which works - fine together with the linuxinfo utility for the LED-panel. - - Michael Lang - - July 29, 2000 (v3.2) - 1) Submission of this driver for kernel 2.4test-XX and 2.2.17. - - Michael Lang - - December 28, 2000 (v3.2d / v4.0) - 1) The interrupt handler had some wrong statement to wait for. This - was done due to experimental reasons during 3.2 development but it - has shown that this is not stable enough. Going back to wait for the - adapter to be not busy is best. - 2) Inquiry requests can be shorter than 255 bytes of return buffer. Due - to a bug in the ibmmca_queuecommand routine, this buffer was forced - to 255 at minimum. If the memory address, this return buffer is pointing - to does not offer more space, invalid memory accesses destabilized the - kernel. - 3) version 4.0 is only valid for kernel 2.4.0 or later. This is necessary - to remove old kernel version dependent waste from the driver. 3.2d is - only distributed with older kernels but keeps compatibility with older - kernel versions. 4.0 and higher versions cannot be used with older - kernels anymore!! You must have at least kernel 2.4.0!! - 4) The commandline argument 'bypass' and all its functionality got removed - in version 4.0. This was never really necessary, as all troubles were - based on non-command related reasons up to now, so bypassing commands - did not help to avoid any bugs. It is kept in 3.2X for debugging reasons. - 5) Dynamic reassignment of ldns was again verified and analyzed to be - completely inoperational. This is corrected and should work now. - 6) All commands that get sent to the SCSI adapter were verified and - completed in such a way, that they are now completely conform to the - demands in the technical description of IBM. Main candidates were the - DEVICE_INQUIRY, REQUEST_SENSE and DEVICE_CAPACITY commands. They must - be transferred by bypassing the internal command buffer of the adapter - or else the response can be a random result. GET_POS_INFO would be more - safe in usage, if one could use the SUPRESS_EXCEPTION_SHORT, but this - is not allowed by the technical references of IBM. (Sorry, folks, the - model 80 problem is still a task to be solved in a different way.) - 7) v3.2d is still hold back for some days for testing, while 4.0 is - released. - - Michael Lang - - January 3, 2001 (v4.0a) - 1) A lot of complains after the 2.4.0-prerelease kernel came in about - the impossibility to compile the driver as a module. This problem is - solved. In combination with that problem, some unprecise declaration - of the function option_setup() gave some warnings during compilation. - This is solved, too by a forward declaration in ibmmca.c. - 2) #ifdef argument concerning CONFIG_SCSI_IBMMCA is no longer needed and - was entirely removed. - 3) Some switch statements got optimized in code, as some minor variables - in internal SCSI-command handlers. - - Michael Lang - - 4 To do - ------- - - IBM SCSI-2 F/W external SCSI bus support in separate mode! - - It seems that the handling of bad disks is really bad - - non-existent, in fact. However, a low-level driver cannot help - much, if such things happen. - - 5 Users' Manual - --------------- - 5.1 Commandline Parameters - -------------------------- - There exist several features for the IBM SCSI-subsystem driver. - The commandline parameter format is: - - ibmmcascsi=<command1>,<command2>,<command3>,... - - where commandN can be one of the following: - - display Owners of a model 95 or other PS/2 systems with an - alphanumeric LED display may set this to have their - display showing the following output of the 8 digits: - - ------DA - - where '-' stays dark, 'D' shows the SCSI-device id - and 'A' shows the SCSI hostindex, being currently - accessed. During boottime, this will give the message - - SCSIini* - - on the LED-panel, where the * represents a rotator, - showing the activity during the probing phase of the - driver which can take up to two minutes per SCSI-adapter. - adisplay This works like display, but gives more optical overview - of the activities on the SCSI-bus. The display will have - the following output: - - 6543210A - - where the numbers 0 to 6 light up at the shown position, - when the SCSI-device is accessed. 'A' shows again the SCSI - hostindex. If display nor adisplay is set, the internal - PS/2 harddisk LED is used for media-activities. So, if - you really do not have a system with a LED-display, you - should not set display or adisplay. Keep in mind, that - display and adisplay can only be used alternatively. It - is not recommended to use this option, if you have some - wide-addressed devices e.g. at the SCSI-2 F/W adapter in - your system. In addition, the usage of the display for - other tasks in parallel, like the linuxinfo-utility makes - no sense with this option. - activity This enables the PS/2 harddisk LED activity indicator. - Most PS/2 have no alphanumeric LED display, but some - indicator. So you should use this parameter to activate it. - If you own model 9595 (Server95), you can have both, the - LED panel and the activity indicator in parallel. However, - some PS/2s, like the 8595 do not have any harddisk LED - activity indicator, which means, that you must use the - alphanumeric LED display if you want to monitor SCSI- - activity. - bypass This is obsolete from driver version 4.0, as the adapters - got that far understood, that the selection between - integrated and bypassed commands should now work completely - correct! For historical reasons, the old description is - kept here: - This commandline parameter forces the driver never to use - SCSI-subsystems' integrated SCSI-command set. Except of - the immediate assign, which is of vital importance for - every IBM SCSI-subsystem to set its ldns right. Instead, - the ordinary ANSI-SCSI-commands are used and passed by the - controller to the SCSI-devices, therefore 'bypass'. The - effort, done by the subsystem is quite bogus and at a - minimum and therefore it should work everywhere. This - could maybe solve troubles with old or integrated SCSI- - controllers and nasty harddisks. Keep in mind, that using - this flag will slow-down SCSI-accesses slightly, as the - software generated commands are always slower than the - hardware. Non-harddisk devices always get read/write- - commands in bypass mode. On the most recent releases of - the Linux IBM-SCSI-driver, the bypass command should be - no longer a necessary thing, if you are sure about your - SCSI-hardware! - normal This is the parameter, introduced on the 2.0.x development - rail by ZP Gu. This parameter defines the SCSI-device - scan order in the new industry standard. This means, that - the first SCSI-device is the one with the lowest pun. - E.g. harddisk at pun=0 is scanned before harddisk at - pun=6, which means, that harddisk at pun=0 gets sda - and the one at pun=6 gets sdb. - ansi The ANSI-standard for the right scan order, as done by - IBM, Microware and Microsoft, scans SCSI-devices starting - at the highest pun, which means, that e.g. harddisk at - pun=6 gets sda and a harddisk at pun=0 gets sdb. If you - like to have the same SCSI-device order, as in DOS, OS-9 - or OS/2, just use this parameter. - fast SCSI-I/O in synchronous mode is done at 5 MHz for IBM- - SCSI-devices. SCSI-2 Fast/Wide Adapter/A external bus - should then run at 10 MHz if Fast-SCSI is enabled, - and at 5 MHz if Fast-SCSI is disabled on the external - bus. This is the default setting when nothing is - specified here. - medium Synchronous rate is at 50% approximately, which means - 2.5 MHz for IBM SCSI-adapters and 5.0 MHz for F/W ext. - SCSI-bus (when Fast-SCSI speed enabled on external bus). - slow The slowest possible synchronous transfer rate is set. - This means 1.82 MHz for IBM SCSI-adapters and 2.0 MHz - for F/W external bus at Fast-SCSI speed on the external - bus. - - A further option is that you can force the SCSI-driver to accept a SCSI- - subsystem at a certain I/O-address with a predefined adapter PUN. This - is done by entering - - commandN = I/O-base - commandN+1 = adapter PUN - - e.g. ibmmcascsi=0x3540,7 will force the driver to detect a SCSI-subsystem - at I/O-address 0x3540 with adapter PUN 7. Please only use this method, if - the driver does really not recognize your SCSI-adapter! With driver version - 3.2, this recognition of various adapters was hugely improved and you - should try first to remove your commandline arguments of such type with a - newer driver. I bet, it will be recognized correctly. Even multiple and - different types of IBM SCSI-adapters should be recognized correctly, too. - Use the forced detection method only as last solution! - - Examples: - - ibmmcascsi=adisplay - - This will use the advanced display mode for the model 95 LED alphanumeric - display. - - ibmmcascsi=display,0x3558,7 - - This will activate the default display mode for the model 95 LED display - and will force the driver to accept a SCSI-subsystem at I/O-base 0x3558 - with adapter PUN 7. - - 5.2 Troubleshooting - ------------------- - The following FAQs should help you to solve some major problems with this - driver. - - Q: "Reset SCSI-devices at boottime" halts the system at boottime, why? - A: This is only tested with the IBM SCSI Adapter w/cache. It is not - yet proven to run on other adapters, however you may be lucky. - In version 3.1d this has been hugely improved and should work better, - now. Normally you really won't need to activate this flag in the - kernel configuration, as all post 1989 SCSI-devices should accept - the reset-signal, when the computer is switched on. The SCSI- - subsystem generates this reset while being initialized. This flag - is really reserved for users with very old, very strange or self-made - SCSI-devices. - Q: Why is the SCSI-order of my drives mirrored to the device-order - seen from OS/2 or DOS ? - A: It depends on the operating system, if it looks at the devices in - ANSI-SCSI-standard (starting from pun 6 and going down to pun 0) or - if it just starts at pun 0 and counts up. If you want to be conform - with OS/2 and DOS, you have to activate this flag in the kernel - configuration or you should set 'ansi' as parameter for the kernel. - The parameter 'normal' sets the new industry standard, starting - from pun 0, scanning up to pun 6. This allows you to change your - opinion still after having already compiled the kernel. - Q: Why can't I find IBM MCA SCSI support in the config menu? - A: You have to activate MCA bus support, first. - Q: Where can I find the latest info about this driver? - A: See the file MAINTAINERS for the current WWW-address, which offers - updates, info and Q/A lists. At this file's origin, the webaddress - was: http://www.staff.uni-mainz.de/mlang/linux.html - Q: My SCSI-adapter is not recognized by the driver, what can I do? - A: Just force it to be recognized by kernel parameters. See section 5.1. - If this really happens, do also send e-mail to the maintainer, as - forced detection should be never necessary. Forced detection is in - principal some flaw of the driver adapter detection and goes into - bug reports. - Q: The driver screws up, if it starts to probe SCSI-devices, is there - some way out of it? - A: Yes, that was some recognition problem of the correct SCSI-adapter - and its I/O base addresses. Upgrade your driver to the latest release - and it should be fine again. - Q: I get a message: panic IBM MCA SCSI: command error .... , what can - I do against this? - A: Previously, I followed the way by ignoring command errors by using - ibmmcascsi=forgiveall, but this command no longer exists and is - obsolete. If such a problem appears, it is caused by some segmentation - fault of the driver, which maps to some unallowed area. The latest - version of the driver should be ok, as most bugs have been solved. - Q: There are still kernel panics, even after having set - ibmmcascsi=forgiveall. Are there other possibilities to prevent - such panics? - A: No, get just the latest release of the driver and it should work - better and better with increasing version number. Forget about this - ibmmcascsi=forgiveall, as also ignorecmd are obsolete.! - Q: Linux panics or stops without any comment, but it is probable, that my - harddisk(s) have bad blocks. - A: Sorry, the bad-block handling is still a feeble point of this driver, - but is on the schedule for development in the near future. - Q: Linux panics while dynamically assigning SCSI-ids or ldns. - A: If you disconnect a SCSI-device from the machine, while Linux is up - and the driver uses dynamical reassignment of logical device numbers - (ldn), it really gets "angry" if it won't find devices, that were still - present at boottime and stops Linux. - Q: The system does not recover after an abort-command has been generated. - A: This is regrettably true, as it is not yet understood, why the - SCSI-adapter does really NOT generate any interrupt at the end of - the abort-command. As no interrupt is generated, the abort command - cannot get finished and the system hangs, sorry, but checks are - running to hunt down this problem. If there is a real pending command, - the interrupt MUST get generated after abort. In this case, it - should finish well. - Q: The system gets in bad shape after a SCSI-reset, is this known? - A: Yes, as there are a lot of prescriptions (see the Linux Hackers' - Guide) what has to be done for reset, we still share the bad shape of - the reset functions with all other low level SCSI-drivers. - Astonishingly, reset works in most cases quite ok, but the harddisks - won't run in synchronous mode anymore after a reset, until you reboot. - Q: Why does my XXX w/Cache adapter not use read-prefetch? - A: Ok, that is not completely possible. If a cache is present, the - adapter tries to use it internally. Explicitly, one can use the cache - with a read prefetch command, maybe in future, but this requires - some major overhead of SCSI-commands that risks the performance to - go down more than it gets improved. Tests with that are running. - Q: I have a IBM SCSI-2 Fast/Wide adapter, it boots in some way and hangs. - A: Yes, that is understood, as for sure, your SCSI-2 Fast/Wide adapter - was in such a case recognized as integrated SCSI-adapter or something - else, but not as the correct adapter. As the I/O-ports get assigned - wrongly by that reason, the system should crash in most cases. You - should upgrade to the latest release of the SCSI-driver. The - recommended version is 3.2 or later. Here, the F/W support is in - a stable and reliable condition. Wide-addressing is in addition - supported. - Q: I get an Oops message and something like "killing interrupt". - A: The reason for this is that the IBM SCSI-subsystem only sends a - termination status back, if some error appeared. In former releases - of the driver, it was not checked, if the termination status block - is NULL. From version 3.2, it is taken care of this. - Q: I have a F/W adapter and the driver sees my internal SCSI-devices, - but ignores the external ones. - A: Select combined busmode in the IBM config-program and check for that - no SCSI-id on the external devices appears on internal devices. - Reboot afterwards. Dual busmode is supported, but works only for the - internal bus, yet. External bus is still ignored. Take care for your - SCSI-ids. If combined bus-mode is activated, on some adapters, - the wide-addressing is not possible, so devices with ids between 8 - and 15 get ignored by the driver & adapter! - Q: I have a 9595 and I get a NMI during heavy SCSI I/O e.g. during fsck. - A COMMAND ERROR is reported and characters on the screen are missing. - Warm reboot is not possible. Things look like quite weird. - A: Check the processor type of your 9595. If you have an 80486 or 486DX-2 - processor complex on your mainboard and you compiled a kernel that - supports 80386 processors, it is possible, that the kernel cannot - keep track of the PS/2 interrupt handling and stops on an NMI. Just - compile a kernel for the correct processor type of your PS/2 and - everything should be fine. This is necessary even if one assumes, - that some 80486 system should be downward compatible to 80386 - software. - Q: Some commands hang and interrupts block the machine. After some - timeout, the syslog reports that it tries to call abort, but the - machine is frozen. - A: This can be a busy wait bug in the interrupt handler of driver - version 3.2. You should at least upgrade to 3.2c if you use - kernel < 2.4.0 and driver version 4.0 if you use kernel 2.4.0 or - later (including all test releases). - Q: I have a PS/2 model 80 and more than 16 MBytes of RAM. The driver - completely refuses to work, reports NMIs, COMMAND ERRORs or other - ambiguous stuff. When reducing the RAM size down below 16 MB, - everything is running smoothly. - A: No real answer, yet. In any case, one should force the kernel to - present SCBs only below the 16 MBytes barrier. Maybe this solves the - problem. Not yet tried, but guessing that it could work. To get this, - set unchecked_isa_dma argument of ibmmca.h from 0 to 1. - - 5.3 Bug reports - -------------- - If you really find bugs in the source code or the driver will successfully - refuse to work on your machine, you should send a bug report to me. The - best for this is to follow the instructions on the WWW-page for this - driver. Fill out the bug-report form, placed on the WWW-page and ship it, - so the bugs can be taken into account with maximum efforts. But, please - do not send bug reports about this driver to Linus Torvalds or Leonard - Zubkoff, as Linus is buried in E-Mail and Leonard is supervising all - SCSI-drivers and won't have the time left to look inside every single - driver to fix a bug and especially DO NOT send modified code to Linus - Torvalds or Alan J. Cox which has not been checked here!!! They are both - quite buried in E-mail (as me, sometimes, too) and one should first check - for problems on my local teststand. Recently, I got a lot of - bug reports for errors in the ibmmca.c code, which I could not imagine, but - a look inside some Linux-distribution showed me quite often some modified - code, which did no longer work on most other machines than the one of the - modifier. Ok, so now that there is maintenance service available for this - driver, please use this address first in order to keep the level of - confusion low. Thank you! - - When you get a SCSI-error message that panics your system, a list of - register-entries of the SCSI-subsystem is shown (from Version 3.1d). With - this list, it is very easy for the maintainer to localize the problem in - the driver or in the configuration of the user. Please write down all the - values from this report and send them to the maintainer. This would really - help a lot and makes life easier concerning misunderstandings. - - Use the bug-report form (see 5.4 for its address) to send all the bug- - stuff to the maintainer or write e-mail with the values from the table. - - 5.4 Support WWW-page - -------------------- - The address of the IBM SCSI-subsystem supporting WWW-page is: - - http://www.staff.uni-mainz.de/mlang/linux.html - - Here you can find info about the background of this driver, patches, - troubleshooting support, news and a bugreport form. Please check that - WWW-page regularly for latest hints. If ever this URL changes, please - refer to the MAINTAINERS file in order to get the latest address. - - For the bugreport, please fill out the formular on the corresponding - WWW-page. Read the dedicated instructions and write as much as you - know about your problem. If you do not like such formulars, please send - some e-mail directly, but at least with the same information as required by - the formular. - - If you have extensive bug reports, including Oops messages and - screen-shots, please feel free to send it directly to the address - of the maintainer, too. The current address of the maintainer is: - - Michael Lang <langa2@kph.uni-mainz.de> - - 6 References - ------------ - IBM Corp., "Update for the PS/2 Hardware Interface Technical Reference, - Common Interfaces", Armonk, September 1991, PN 04G3281, - (available in the U.S. for $21.75 at 1-800-IBM-PCTB or in Germany for - around 40,-DM at "Hallo IBM"). - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter with Cache Technical Reference", Armonk, March 1990, PN 68X2365. - - IBM Corp., "Personal System/2 Micro Channel SCSI - Adapter Technical Reference", Armonk, March 1990, PN 68X2397. - - IBM Corp., "SCSI-2 Fast/Wide Adapter/A Technical Reference - Dual Bus", - Armonk, March 1994, PN 83G7545. - - Friedhelm Schmidt, "SCSI-Bus und IDE-Schnittstelle - Moderne Peripherie- - Schnittstellen: Hardware, Protokollbeschreibung und Anwendung", 2. Aufl. - Addison Wesley, 1996. - - Michael K. Johnson, "The Linux Kernel Hackers' Guide", Version 0.6, Chapel - Hill - North Carolina, 1995 - - Andreas Kaiser, "SCSI TAPE BACKUP for OS/2 2.0", Version 2.12, Stuttgart - 1993 - - Helmut Rompel, "IBM Computerwelt GUIDE", What is what bei IBM., Systeme * - Programme * Begriffe, IWT-Verlag GmbH - Muenchen, 1988 - - 7 Credits to - ------------ - 7.1 People - ---------- - Klaus Grimm - who already a long time ago gave me the old code from the - SCSI-driver in order to get it running for some old machine - in our institute. - Martin Kolinek - who wrote the first release of the IBM SCSI-subsystem driver. - Chris Beauregard - who for a long time maintained MCA-Linux and the SCSI-driver - in the beginning. Chris, wherever you are: Cheers to you! - Klaus Kudielka - with whom in the 2.1.x times, I had a quite fruitful - cooperation to get the driver running as a module and to get - it running with multiple SCSI-adapters. - David Weinehall - for his excellent maintenance of the MCA-stuff and the quite - detailed bug reports and ideas for this driver (and his - patience ;-)). - Alan J. Cox - for his bug reports and his bold activities in cross-checking - the driver-code with his teststand. - - 7.2 Sponsors & Supporters - ------------------------- - "Hallo IBM", - IBM-Deutschland GmbH - the service of IBM-Deutschland for customers. Their E-Mail - service is unbeatable. Whatever old stuff I asked for, I - always got some helpful answers. - Karl-Otto Reimers, - IBM Klub - Sparte IBM Geschichte, Sindelfingen - for sending me a copy of the w/Cache manual from the - IBM-Deutschland archives. - Harald Staiger - for his extensive hardware donations which allows me today - still to test the driver in various constellations. - Erich Fritscher - for his very kind sponsoring. - Louis Ohland, - Charles Lasitter - for support by shipping me an IBM SCSI-2 Fast/Wide manual. - In addition, the contribution of various hardware is quite - decessive and will make it possible to add FWSR (RAID) - adapter support to the driver in the near future! So, - complaints about no RAID support won't remain forever. - Yes, folks, that is no joke, RAID support is going to rise! - Erik Weber - for the great deal we made about a model 9595 and the nice - surrounding equipment and the cool trip to Mannheim - second-hand computer market. In addition, I would like - to thank him for his exhaustive SCSI-driver testing on his - 95er PS/2 park. - Anthony Hogbin - for his direct shipment of a SCSI F/W adapter, which allowed - me immediately on the first stage to try it on model 8557 - together with onboard SCSI adapter and some SCSI w/Cache. - Andreas Hotz - for his support by memory and an IBM SCSI-adapter. Collecting - all this together now allows me to try really things with - the driver at maximum load and variety on various models in - a very quick and efficient way. - Peter Jennewein - for his model 30, which serves me as part of my teststand - and his cool remark about how you make an ordinary diskette - drive working and how to connect it to an IBM-diskette port. - Johannes Gutenberg-Universitaet, Mainz & - Institut fuer Kernphysik, Mainz Microtron (MAMI) - for the offered space, the link, placed on the central - homepage and the space to store and offer the driver and - related material and the free working times, which allow - me to answer all your e-mail. - - 8 Trademarks - ------------ - IBM, PS/2, OS/2, Microchannel are registered trademarks of International - Business Machines Corporation - - MS-DOS is a registered trademark of Microsoft Corporation - - Microware, OS-9 are registered trademarks of Microware Systems - - 9 Disclaimer - ------------ - Beside the GNU General Public License and the dependent disclaimers and disclaimers - concerning the Linux-kernel in special, this SCSI-driver comes without any - warranty. Its functionality is tested as good as possible on certain - machines and combinations of computer hardware, which does not exclude, - that data loss or severe damage of hardware is possible while using this - part of software on some arbitrary computer hardware or in combination - with other software packages. It is highly recommended to make backup - copies of your data before using this software. Furthermore, personal - injuries by hardware defects, that could be caused by this SCSI-driver are - not excluded and it is highly recommended to handle this driver with a - maximum of carefulness. - - This driver supports hardware, produced by International Business Machines - Corporation (IBM). - ------- -Michael Lang -(langa2@kph.uni-mainz.de) diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 21e5798526ee..2bfd6f6d2d3d 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -37,9 +37,6 @@ parameters may be changed at runtime by the command eata= [HW,SCSI] - fd_mcs= [HW,SCSI] - See header of drivers/scsi/fd_mcs.c. - fdomain= [HW,SCSI] See header of drivers/scsi/fdomain.c. @@ -48,9 +45,6 @@ parameters may be changed at runtime by the command gvp11= [HW,SCSI] - ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter - See Documentation/mca.txt. - in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index a340b18cd4eb..2b06aba4fa0f 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -30,7 +30,7 @@ the motherboard (or both). Some aic7xxx based HBAs are dual controllers and thus represent two hosts. Like most modern HBAs, each aic7xxx host has its own PCI device address. [The one-to-one correspondence between a SCSI host and a PCI device is common but not required (e.g. with -ISA or MCA adapters).] +ISA adapters).] The SCSI mid level isolates an LLD from other layers such as the SCSI upper layer drivers and the block layer. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 29684c8142b0..7a66d0e97dd3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -807,19 +807,6 @@ config SCSI_FUTURE_DOMAIN To compile this driver as a module, choose M here: the module will be called fdomain. -config SCSI_FD_MCS - tristate "Future Domain MCS-600/700 SCSI support" - depends on MCA_LEGACY && SCSI - ---help--- - This is support for Future Domain MCS 600/700 MCA SCSI adapters. - Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which - is identical to the MCS 700 and hence also supported by this driver. - This driver also supports the Reply SB16/SCSI card (the SCSI part). - It supports multiple adapters in the same system. - - To compile this driver as a module, choose M here: the - module will be called fd_mcs. - config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API @@ -889,76 +876,6 @@ config SCSI_GENERIC_NCR53C400 not detect your card. See the file <file:Documentation/scsi/g_NCR5380.txt> for details. -config SCSI_IBMMCA - tristate "IBMMCA SCSI support" - depends on MCA && SCSI - ---help--- - This is support for the IBM SCSI adapter found in many of the PS/2 - series computers. These machines have an MCA bus, so you need to - answer Y to "MCA support" as well and read - <file:Documentation/mca.txt>. - - If the adapter isn't found during boot (a common problem for models - 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel - option, where <pun> is the id of the SCSI subsystem (usually 7, but - if that doesn't work check your reference diskette). Owners of - model 95 with a LED-matrix-display can in addition activate some - activity info like under OS/2, but more informative, by setting - 'ibmmcascsi=display' as an additional kernel parameter. Try "man - bootparam" or see the documentation of your boot loader about how to - pass options to the kernel. - - To compile this driver as a module, choose M here: the - module will be called ibmmca. - -config IBMMCA_SCSI_ORDER_STANDARD - bool "Standard SCSI-order" - depends on SCSI_IBMMCA - ---help--- - In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks - are assigned to the drive letters, starting with the lowest SCSI-id - (physical number -- pun) to be drive C:, as seen from DOS and - similar operating systems. When looking into papers describing the - ANSI-SCSI-standard, this assignment of drives appears to be wrong. - The SCSI-standard follows a hardware-hierarchy which says that id 7 - has the highest priority and id 0 the lowest. Therefore, the host - adapters are still today everywhere placed as SCSI-id 7 by default. - In the SCSI-standard, the drive letters express the priority of the - disk. C: should be the hard disk, or a partition on it, with the - highest priority. This must therefore be the disk with the highest - SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the - original definition of the SCSI-standard as also industrial- and - process-control-machines, like VME-CPUs running under realtime-OSes - (e.g. LynxOS, OS9) do. - - If you like to run Linux on your MCA-machine with the same - assignment of hard disks as seen from e.g. DOS or OS/2 on your - machine, which is in addition conformant to the SCSI-standard, you - must say Y here. This is also necessary for MCA-Linux users who want - to keep downward compatibility to older releases of the - IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than - June 1997). - - If you like to have the lowest SCSI-id assigned as drive C:, as - modern SCSI-BIOSes do, which does not conform to the standard, but - is widespread and common in the PC-world of today, you must say N - here. If unsure, say Y. - -config IBMMCA_SCSI_DEV_RESET - bool "Reset SCSI-devices at boottime" - depends on SCSI_IBMMCA - ---help--- - By default, SCSI-devices are reset when the machine is powered on. - However, some devices exist, like special-control-devices, - SCSI-CNC-machines, SCSI-printer or scanners of older type, that do - not reset when switched on. If you say Y here, each device connected - to your SCSI-bus will be issued a reset-command after it has been - probed, while the kernel is booting. This may cause problems with - more modern devices, like hard disks, which do not appreciate these - reset commands, and can cause your system to hang. So say Y only if - you know that one of your older devices needs it; N is the safe - answer. - config SCSI_IPS tristate "IBM ServeRAID support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 8deedeaf5608..1a3368b08615 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o -obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o obj-$(CONFIG_SCSI_IN2000) += in2000.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o @@ -100,7 +99,6 @@ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o obj-$(CONFIG_SCSI_7000FASST) += wd7000.o -obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o obj-$(CONFIG_SCSI_EATA) += eata.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_DC390T) += tmscsim.o diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index ede91f378000..f79c8f9e33a4 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -22,7 +22,7 @@ * Added module command-line options * 19-Jul-99 * Modified by Adam Fritzler - * Added proper detection of the AHA-1640 (MCA version of AHA-1540) + * Added proper detection of the AHA-1640 (MCA, now deleted) */ #include <linux/module.h> @@ -37,8 +37,6 @@ #include <linux/spinlock.h> #include <linux/isapnp.h> #include <linux/blkdev.h> -#include <linux/mca.h> -#include <linux/mca-legacy.h> #include <linux/slab.h> #include <asm/dma.h> @@ -71,7 +69,7 @@ #define MAXBOARDS 4 /* Increase this and the sizes of the arrays below, if you need more.. */ -/* Boards 3,4 slots are reserved for ISAPnP/MCA scans */ +/* Boards 3,4 slots are reserved for ISAPnP scans */ static unsigned int bases[MAXBOARDS] __initdata = {0x330, 0x334, 0, 0}; @@ -1009,66 +1007,6 @@ static int __init aha1542_detect(struct scsi_host_template * tpnt) #endif /* - * Find MicroChannel cards (AHA1640) - */ -#ifdef CONFIG_MCA_LEGACY - if(MCA_bus) { - int slot = 0; - int pos = 0; - - for (indx = 0; (slot != MCA_NOTFOUND) && (indx < ARRAY_SIZE(bases)); indx++) { - - if (bases[indx]) - continue; - - /* Detect only AHA-1640 cards -- MCA ID 0F1F */ - slot = mca_find_unused_adapter(0x0f1f, slot); - if (slot == MCA_NOTFOUND) - break; - - /* Found one */ - pos = mca_read_stored_pos(slot, 3); - - /* Decode address */ - if (pos & 0x80) { - if (pos & 0x02) { - if (pos & 0x01) - bases[indx] = 0x334; - else - bases[indx] = 0x234; - } else { - if (pos & 0x01) - bases[indx] = 0x134; - } - } else { - if (pos & 0x02) { - if (pos & 0x01) - bases[indx] = 0x330; - else - bases[indx] = 0x230; - } else { - if (pos & 0x01) - bases[indx] = 0x130; - } - } - - /* No need to decode IRQ and Arb level -- those are - * read off the card later. - */ - printk(KERN_INFO "Found an AHA-1640 in MCA slot %d, I/O 0x%04x\n", slot, bases[indx]); - - mca_set_adapter_name(slot, "Adapter AHA-1640"); - mca_set_adapter_procfn(slot, NULL, NULL); - mca_mark_as_used(slot); - - /* Go on */ - slot++; - } - - } -#endif - - /* * Hunt for ISA Plug'n'Pray Adaptecs (AHA1535) */ diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c deleted file mode 100644 index 53bfcaa86f09..000000000000 --- a/drivers/scsi/fd_mcs.c +++ /dev/null @@ -1,1354 +0,0 @@ -/* fd_mcs.c -- Future Domain MCS 600/700 (or IBM OEM) driver - * - * FutureDomain MCS-600/700 v0.2 03/11/1998 by ZP Gu (zpg@castle.net) - * - * This driver is cloned from fdomain.* to specifically support - * the Future Domain MCS 600/700 MCA SCSI adapters. Some PS/2s - * also equipped with IBM Fast SCSI Adapter/A which is an OEM - * of MCS 700. - * - * This driver also supports Reply SB16/SCSI card (the SCSI part). - * - * What makes this driver different is that this driver is MCA only - * and it supports multiple adapters in the same system, IRQ - * sharing, some driver statistics, and maps highest SCSI id to sda. - * All cards are auto-detected. - * - * Assumptions: TMC-1800/18C50/18C30, BIOS >= 3.4 - * - * LILO command-line options: - * fd_mcs=<FIFO_COUNT>[,<FIFO_SIZE>] - * - * ******************************************************** - * Please see Copyrights/Comments in fdomain.* for credits. - * Following is from fdomain.c for acknowledgement: - * - * Created: Sun May 3 18:53:19 1992 by faith@cs.unc.edu - * Revised: Wed Oct 2 11:10:55 1996 by r.faith@ieee.org - * Author: Rickard E. Faith, faith@cs.unc.edu - * Copyright 1992, 1993, 1994, 1995, 1996 Rickard E. Faith - * - * $Id: fdomain.c,v 5.45 1996/10/02 15:13:06 root Exp $ - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - ************************************************************************** - - NOTES ON USER DEFINABLE OPTIONS: - - DEBUG: This turns on the printing of various debug information. - - ENABLE_PARITY: This turns on SCSI parity checking. With the current - driver, all attached devices must support SCSI parity. If none of your - devices support parity, then you can probably get the driver to work by - turning this option off. I have no way of testing this, however, and it - would appear that no one ever uses this option. - - FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the - 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by - the SCSI device, an interrupt will be raised. Therefore, this could be as - low as 0, or as high as 16. Note, however, that values which are too high - or too low seem to prevent any interrupts from occurring, and thereby lock - up the machine. I have found that 2 is a good number, but throughput may - be increased by changing this value to values which are close to 2. - Please let me know if you try any different values. - [*****Now a runtime option*****] - - RESELECTION: This is no longer an option, since I gave up trying to - implement it in version 4.x of this driver. It did not improve - performance at all and made the driver unstable (because I never found one - of the two race conditions which were introduced by the multiple - outstanding command code). The instability seems a very high price to pay - just so that you don't have to wait for the tape to rewind. If you want - this feature implemented, send me patches. I'll be happy to send a copy - of my (broken) driver to anyone who would like to see a copy. - - **************************************************************************/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/proc_fs.h> -#include <linux/delay.h> -#include <linux/mca.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <scsi/scsicam.h> -#include <linux/mca-legacy.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -#define DRIVER_VERSION "v0.2 by ZP Gu<zpg@castle.net>" - -/* START OF USER DEFINABLE OPTIONS */ - -#define DEBUG 0 /* Enable debugging output */ -#define ENABLE_PARITY 1 /* Enable SCSI Parity */ - -/* END OF USER DEFINABLE OPTIONS */ - -#if DEBUG -#define EVERY_ACCESS 0 /* Write a line on every scsi access */ -#define ERRORS_ONLY 1 /* Only write a line if there is an error */ -#define DEBUG_MESSAGES 1 /* Debug MESSAGE IN phase */ -#define DEBUG_ABORT 1 /* Debug abort() routine */ -#define DEBUG_RESET 1 /* Debug reset() routine */ -#define DEBUG_RACE 1 /* Debug interrupt-driven race condition */ -#else -#define EVERY_ACCESS 0 /* LEAVE THESE ALONE--CHANGE THE ONES ABOVE */ -#define ERRORS_ONLY 0 -#define DEBUG_MESSAGES 0 -#define DEBUG_ABORT 0 -#define DEBUG_RESET 0 -#define DEBUG_RACE 0 -#endif - -/* Errors are reported on the line, so we don't need to report them again */ -#if EVERY_ACCESS -#undef ERRORS_ONLY -#define ERRORS_ONLY 0 -#endif - -#if ENABLE_PARITY -#define PARITY_MASK 0x08 -#else -#define PARITY_MASK 0x00 -#endif - -enum chip_type { - unknown = 0x00, - tmc1800 = 0x01, - tmc18c50 = 0x02, - tmc18c30 = 0x03, -}; - -enum { - in_arbitration = 0x02, - in_selection = 0x04, - in_other = 0x08, - disconnect = 0x10, - aborted = 0x20, - sent_ident = 0x40, -}; - -enum in_port_type { - Read_SCSI_Data = 0, - SCSI_Status = 1, - TMC_Status = 2, - FIFO_Status = 3, /* tmc18c50/tmc18c30 only */ - Interrupt_Cond = 4, /* tmc18c50/tmc18c30 only */ - LSB_ID_Code = 5, - MSB_ID_Code = 6, - Read_Loopback = 7, - SCSI_Data_NoACK = 8, - Interrupt_Status = 9, - Configuration1 = 10, - Configuration2 = 11, /* tmc18c50/tmc18c30 only */ - Read_FIFO = 12, - FIFO_Data_Count = 14 -}; - -enum out_port_type { - Write_SCSI_Data = 0, - SCSI_Cntl = 1, - Interrupt_Cntl = 2, - SCSI_Mode_Cntl = 3, - TMC_Cntl = 4, - Memory_Cntl = 5, /* tmc18c50/tmc18c30 only */ - Write_Loopback = 7, - IO_Control = 11, /* tmc18c30 only */ - Write_FIFO = 12 -}; - -struct fd_hostdata { - unsigned long _bios_base; - int _bios_major; - int _bios_minor; - volatile int _in_command; - Scsi_Cmnd *_current_SC; - enum chip_type _chip; - int _adapter_mask; - int _fifo_count; /* Number of 512 byte blocks before INTR */ - - char _adapter_name[64]; -#if DEBUG_RACE - volatile int _in_interrupt_flag; -#endif - - int _SCSI_Mode_Cntl_port; - int _FIFO_Data_Count_port; - int _Interrupt_Cntl_port; - int _Interrupt_Status_port; - int _Interrupt_Cond_port; - int _Read_FIFO_port; - int _Read_SCSI_Data_port; - int _SCSI_Cntl_port; - int _SCSI_Data_NoACK_port; - int _SCSI_Status_port; - int _TMC_Cntl_port; - int _TMC_Status_port; - int _Write_FIFO_port; - int _Write_SCSI_Data_port; - - int _FIFO_Size; /* = 0x2000; 8k FIFO for - pre-tmc18c30 chips */ - /* simple stats */ - int _Bytes_Read; - int _Bytes_Written; - int _INTR_Processed; -}; - -#define FD_MAX_HOSTS 3 /* enough? */ - -#define HOSTDATA(shpnt) ((struct fd_hostdata *) shpnt->hostdata) -#define bios_base (HOSTDATA(shpnt)->_bios_base) -#define bios_major (HOSTDATA(shpnt)->_bios_major) -#define bios_minor (HOSTDATA(shpnt)->_bios_minor) -#define in_command (HOSTDATA(shpnt)->_in_command) -#define current_SC (HOSTDATA(shpnt)->_current_SC) -#define chip (HOSTDATA(shpnt)->_chip) -#define adapter_mask (HOSTDATA(shpnt)->_adapter_mask) -#define FIFO_COUNT (HOSTDATA(shpnt)->_fifo_count) -#define adapter_name (HOSTDATA(shpnt)->_adapter_name) -#if DEBUG_RACE -#define in_interrupt_flag (HOSTDATA(shpnt)->_in_interrupt_flag) -#endif -#define SCSI_Mode_Cntl_port (HOSTDATA(shpnt)->_SCSI_Mode_Cntl_port) -#define FIFO_Data_Count_port (HOSTDATA(shpnt)->_FIFO_Data_Count_port) -#define Interrupt_Cntl_port (HOSTDATA(shpnt)->_Interrupt_Cntl_port) -#define Interrupt_Status_port (HOSTDATA(shpnt)->_Interrupt_Status_port) -#define Interrupt_Cond_port (HOSTDATA(shpnt)->_Interrupt_Cond_port) -#define Read_FIFO_port (HOSTDATA(shpnt)->_Read_FIFO_port) -#define Read_SCSI_Data_port (HOSTDATA(shpnt)->_Read_SCSI_Data_port) -#define SCSI_Cntl_port (HOSTDATA(shpnt)->_SCSI_Cntl_port) -#define SCSI_Data_NoACK_port (HOSTDATA(shpnt)->_SCSI_Data_NoACK_port) -#define SCSI_Status_port (HOSTDATA(shpnt)->_SCSI_Status_port) -#define TMC_Cntl_port (HOSTDATA(shpnt)->_TMC_Cntl_port) -#define TMC_Status_port (HOSTDATA(shpnt)->_TMC_Status_port) -#define Write_FIFO_port (HOSTDATA(shpnt)->_Write_FIFO_port) -#define Write_SCSI_Data_port (HOSTDATA(shpnt)->_Write_SCSI_Data_port) -#define FIFO_Size (HOSTDATA(shpnt)->_FIFO_Size) -#define Bytes_Read (HOSTDATA(shpnt)->_Bytes_Read) -#define Bytes_Written (HOSTDATA(shpnt)->_Bytes_Written) -#define INTR_Processed (HOSTDATA(shpnt)->_INTR_Processed) - -struct fd_mcs_adapters_struct { - char *name; - int id; - enum chip_type fd_chip; - int fifo_size; - int fifo_count; -}; - -#define REPLY_ID 0x5137 - -static struct fd_mcs_adapters_struct fd_mcs_adapters[] = { - {"Future Domain SCSI Adapter MCS-700(18C50)", - 0x60e9, - tmc18c50, - 0x2000, - 4}, - {"Future Domain SCSI Adapter MCS-600/700(TMC-1800)", - 0x6127, - tmc1800, - 0x2000, - 4}, - {"Reply Sound Blaster/SCSI Adapter", - REPLY_ID, - tmc18c30, - 0x800, - 2}, -}; - -#define FD_BRDS ARRAY_SIZE(fd_mcs_adapters) - -static irqreturn_t fd_mcs_intr(int irq, void *dev_id); - -static unsigned long addresses[] = { 0xc8000, 0xca000, 0xce000, 0xde000 }; -static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 }; -static unsigned short interrupts[] = { 3, 5, 10, 11, 12, 14, 15, 0 }; - -/* host information */ -static int found = 0; -static struct Scsi_Host *hosts[FD_MAX_HOSTS + 1] = { NULL }; - -static int user_fifo_count = 0; -static int user_fifo_size = 0; - -#ifndef MODULE -static int __init fd_mcs_setup(char *str) -{ - static int done_setup = 0; - int ints[3]; - - get_options(str, 3, ints); - if (done_setup++ || ints[0] < 1 || ints[0] > 2 || ints[1] < 1 || ints[1] > 16) { - printk("fd_mcs: usage: fd_mcs=FIFO_COUNT, FIFO_SIZE\n"); - return 0; - } - - user_fifo_count = ints[0] >= 1 ? ints[1] : 0; - user_fifo_size = ints[0] >= 2 ? ints[2] : 0; - return 1; -} - -__setup("fd_mcs=", fd_mcs_setup); -#endif /* !MODULE */ - -static void print_banner(struct Scsi_Host *shpnt) -{ - printk("scsi%d <fd_mcs>: ", shpnt->host_no); - - if (bios_base) { - printk("BIOS at 0x%lX", bios_base); - } else { - printk("No BIOS"); - } - - printk(", HostID %d, %s Chip, IRQ %d, IO 0x%lX\n", shpnt->this_id, chip == tmc18c50 ? "TMC-18C50" : (chip == tmc18c30 ? "TMC-18C30" : (chip == tmc1800 ? "TMC-1800" : "Unknown")), shpnt->irq, shpnt->io_port); -} - - -static void do_pause(unsigned amount) -{ /* Pause for amount*10 milliseconds */ - do { - mdelay(10); - } while (--amount); -} - -static void fd_mcs_make_bus_idle(struct Scsi_Host *shpnt) -{ - outb(0, SCSI_Cntl_port); - outb(0, SCSI_Mode_Cntl_port); - if (chip == tmc18c50 || chip == tmc18c30) - outb(0x21 | PARITY_MASK, TMC_Cntl_port); /* Clear forced intr. */ - else - outb(0x01 | PARITY_MASK, TMC_Cntl_port); -} - -static int fd_mcs_detect(struct scsi_host_template * tpnt) -{ - int loop; - struct Scsi_Host *shpnt; - - /* get id, port, bios, irq */ - int slot; - u_char pos2, pos3, pos4; - int id, port, irq; - unsigned long bios; - - /* if not MCA machine, return */ - if (!MCA_bus) - return 0; - - /* changeable? */ - id = 7; - - for (loop = 0; loop < FD_BRDS; loop++) { - slot = 0; - while (MCA_NOTFOUND != (slot = mca_find_adapter(fd_mcs_adapters[loop].id, slot))) { - - /* if we get this far, an adapter has been detected and is - enabled */ - - printk(KERN_INFO "scsi <fd_mcs>: %s at slot %d\n", fd_mcs_adapters[loop].name, slot + 1); - - pos2 = mca_read_stored_pos(slot, 2); - pos3 = mca_read_stored_pos(slot, 3); - pos4 = mca_read_stored_pos(slot, 4); - - /* ready for next probe */ - slot++; - - if (fd_mcs_adapters[loop].id == REPLY_ID) { /* reply card */ - static int reply_irq[] = { 10, 11, 14, 15 }; - - bios = 0; /* no bios */ - - if (pos2 & 0x2) - port = ports[pos4 & 0x3]; - else - continue; - - /* can't really disable it, same as irq=10 */ - irq = reply_irq[((pos4 >> 2) & 0x1) + 2 * ((pos4 >> 4) & 0x1)]; - } else { - bios = addresses[pos2 >> 6]; - port = ports[(pos2 >> 4) & 0x03]; - irq = interrupts[(pos2 >> 1) & 0x07]; - } - - if (irq) { - /* claim the slot */ - mca_set_adapter_name(slot - 1, fd_mcs_adapters[loop].name); - - /* check irq/region */ - if (request_irq(irq, fd_mcs_intr, IRQF_SHARED, "fd_mcs", hosts)) { - printk(KERN_ERR "fd_mcs: interrupt is not available, skipping...\n"); - continue; - } - - /* request I/O region */ - if (request_region(port, 0x10, "fd_mcs")) { - printk(KERN_ERR "fd_mcs: I/O region is already in use, skipping...\n"); - continue; - } - /* register */ - if (!(shpnt = scsi_register(tpnt, sizeof(struct fd_hostdata)))) { - printk(KERN_ERR "fd_mcs: scsi_register() failed\n"); - release_region(port, 0x10); - free_irq(irq, hosts); - continue; - } - - - /* save name */ - strcpy(adapter_name, fd_mcs_adapters[loop].name); - - /* chip/fifo */ - chip = fd_mcs_adapters[loop].fd_chip; - /* use boot time value if available */ - FIFO_COUNT = user_fifo_count ? user_fifo_count : fd_mcs_adapters[loop].fifo_count; - FIFO_Size = user_fifo_size ? user_fifo_size : fd_mcs_adapters[loop].fifo_size; - -/* FIXME: Do we need to keep this bit of code inside NOT_USED around at all? */ -#ifdef NOT_USED - /* *************************************************** */ - /* Try to toggle 32-bit mode. This only - works on an 18c30 chip. (User reports - say this works, so we should switch to - it in the near future.) */ - outb(0x80, port + IO_Control); - if ((inb(port + Configuration2) & 0x80) == 0x80) { - outb(0x00, port + IO_Control); - if ((inb(port + Configuration2) & 0x80) == 0x00) { - chip = tmc18c30; - FIFO_Size = 0x800; /* 2k FIFO */ - - printk("FIRST: chip=%s, fifo_size=0x%x\n", (chip == tmc18c30) ? "tmc18c30" : "tmc18c50", FIFO_Size); - } - } - - /* That should have worked, but appears to - have problems. Let's assume it is an - 18c30 if the RAM is disabled. */ - - if (inb(port + Configuration2) & 0x02) { - chip = tmc18c30; - FIFO_Size = 0x800; /* 2k FIFO */ - - printk("SECOND: chip=%s, fifo_size=0x%x\n", (chip == tmc18c30) ? "tmc18c30" : "tmc18c50", FIFO_Size); - } - /* *************************************************** */ -#endif - - /* IBM/ANSI scsi scan ordering */ - /* Stick this back in when the scsi.c changes are there */ - shpnt->reverse_ordering = 1; - - - /* saving info */ - hosts[found++] = shpnt; - - shpnt->this_id = id; - shpnt->irq = irq; - shpnt->io_port = port; - shpnt->n_io_port = 0x10; - - /* save */ - bios_base = bios; - adapter_mask = (1 << id); - - /* save more */ - SCSI_Mode_Cntl_port = port + SCSI_Mode_Cntl; - FIFO_Data_Count_port = port + FIFO_Data_Count; - Interrupt_Cntl_port = port + Interrupt_Cntl; - Interrupt_Status_port = port + Interrupt_Status; - Interrupt_Cond_port = port + Interrupt_Cond; - Read_FIFO_port = port + Read_FIFO; - Read_SCSI_Data_port = port + Read_SCSI_Data; - SCSI_Cntl_port = port + SCSI_Cntl; - SCSI_Data_NoACK_port = port + SCSI_Data_NoACK; - SCSI_Status_port = port + SCSI_Status; - TMC_Cntl_port = port + TMC_Cntl; - TMC_Status_port = port + TMC_Status; - Write_FIFO_port = port + Write_FIFO; - Write_SCSI_Data_port = port + Write_SCSI_Data; - - Bytes_Read = 0; - Bytes_Written = 0; - INTR_Processed = 0; - - /* say something */ - print_banner(shpnt); - - /* reset */ - outb(1, SCSI_Cntl_port); - do_pause(2); - outb(0, SCSI_Cntl_port); - do_pause(115); - outb(0, SCSI_Mode_Cntl_port); - outb(PARITY_MASK, TMC_Cntl_port); - /* done reset */ - } - } - - if (found == FD_MAX_HOSTS) { - printk("fd_mcs: detecting reached max=%d host adapters.\n", FD_MAX_HOSTS); - break; - } - } - - return found; -} - -static const char *fd_mcs_info(struct Scsi_Host *shpnt) -{ - return adapter_name; -} - -static int TOTAL_INTR = 0; - -/* - * inout : decides on the direction of the dataflow and the meaning of the - * variables - * buffer: If inout==FALSE data is being written to it else read from it - * *start: If inout==FALSE start of the valid data in the buffer - * offset: If inout==FALSE offset from the beginning of the imaginary file - * from which we start writing into the buffer - * length: If inout==FALSE max number of bytes to be written into the buffer - * else number of bytes in the buffer - */ -static int fd_mcs_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout) -{ - int len = 0; - - if (inout) - return (-ENOSYS); - - *start = buffer + offset; - - len += sprintf(buffer + len, "Future Domain MCS-600/700 Driver %s\n", DRIVER_VERSION); - len += sprintf(buffer + len, "HOST #%d: %s\n", shpnt->host_no, adapter_name); - len += sprintf(buffer + len, "FIFO Size=0x%x, FIFO Count=%d\n", FIFO_Size, FIFO_COUNT); - len += sprintf(buffer + len, "DriverCalls=%d, Interrupts=%d, BytesRead=%d, BytesWrite=%d\n\n", TOTAL_INTR, INTR_Processed, Bytes_Read, Bytes_Written); - - if ((len -= offset) <= 0) - return 0; - if (len > length) - len = length; - return len; -} - -static int fd_mcs_select(struct Scsi_Host *shpnt, int target) -{ - int status; - unsigned long timeout; - - outb(0x82, SCSI_Cntl_port); /* Bus Enable + Select */ - outb(adapter_mask | (1 << target), SCSI_Data_NoACK_port); - - /* Stop arbitration and enable parity */ - outb(PARITY_MASK, TMC_Cntl_port); - - timeout = 350; /* 350mS -- because of timeouts - (was 250mS) */ - - do { - status = inb(SCSI_Status_port); /* Read adapter status */ - if (status & 1) { /* Busy asserted */ - /* Enable SCSI Bus (on error, should make bus idle with 0) */ - outb(0x80, SCSI_Cntl_port); - return 0; - } - udelay(1000); /* wait one msec */ - } while (--timeout); - - /* Make bus idle */ - fd_mcs_make_bus_idle(shpnt); -#if EVERY_ACCESS - if (!target) - printk("Selection failed\n"); -#endif -#if ERRORS_ONLY - if (!target) { - static int flag = 0; - - if (!flag) /* Skip first failure for all chips. */ - ++flag; - else - printk("fd_mcs: Selection failed\n"); - } -#endif - return 1; -} - -static void my_done(struct Scsi_Host *shpnt, int error) -{ - if (in_command) { - in_command = 0; - outb(0x00, Interrupt_Cntl_port); - fd_mcs_make_bus_idle(shpnt); - current_SC->result = error; - current_SC->scsi_done(current_SC); - } else { - panic("fd_mcs: my_done() called outside of command\n"); - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif -} - -/* only my_done needs to be protected */ -static irqreturn_t fd_mcs_intr(int irq, void *dev_id) -{ - unsigned long flags; - int status; - int done = 0; - unsigned data_count, tmp_count; - - int i = 0; - struct Scsi_Host *shpnt; - - TOTAL_INTR++; - - /* search for one adapter-response on shared interrupt */ - while ((shpnt = hosts[i++])) { - if ((inb(TMC_Status_port)) & 1) - break; - } - - /* return if some other device on this IRQ caused the interrupt */ - if (!shpnt) { - return IRQ_NONE; - } - - INTR_Processed++; - - outb(0x00, Interrupt_Cntl_port); - - /* Abort calls my_done, so we do nothing here. */ - if (current_SC->SCp.phase & aborted) { -#if DEBUG_ABORT - printk("Interrupt after abort, ignoring\n"); -#endif - /* return IRQ_HANDLED; */ - } -#if DEBUG_RACE - ++in_interrupt_flag; -#endif - - if (current_SC->SCp.phase & in_arbitration) { - status = inb(TMC_Status_port); /* Read adapter status */ - if (!(status & 0x02)) { -#if EVERY_ACCESS - printk(" AFAIL "); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, DID_BUS_BUSY << 16); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - current_SC->SCp.phase = in_selection; - - outb(0x40 | FIFO_COUNT, Interrupt_Cntl_port); - - outb(0x82, SCSI_Cntl_port); /* Bus Enable + Select */ - outb(adapter_mask | (1 << scmd_id(current_SC)), SCSI_Data_NoACK_port); - - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, TMC_Cntl_port); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } else if (current_SC->SCp.phase & in_selection) { - status = inb(SCSI_Status_port); - if (!(status & 0x01)) { - /* Try again, for slow devices */ - if (fd_mcs_select(shpnt, scmd_id(current_SC))) { -#if EVERY_ACCESS - printk(" SFAIL "); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, DID_NO_CONNECT << 16); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else { -#if EVERY_ACCESS - printk(" AltSel "); -#endif - /* Stop arbitration and enable parity */ - outb(0x10 | PARITY_MASK, TMC_Cntl_port); - } - } - current_SC->SCp.phase = in_other; - outb(0x90 | FIFO_COUNT, Interrupt_Cntl_port); - outb(0x80, SCSI_Cntl_port); -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; - } - - /* current_SC->SCp.phase == in_other: this is the body of the routine */ - - status = inb(SCSI_Status_port); - - if (status & 0x10) { /* REQ */ - - switch (status & 0x0e) { - - case 0x08: /* COMMAND OUT */ - outb(current_SC->cmnd[current_SC->SCp.sent_command++], Write_SCSI_Data_port); -#if EVERY_ACCESS - printk("CMD = %x,", current_SC->cmnd[current_SC->SCp.sent_command - 1]); -#endif - break; - case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, TMC_Cntl_port); - } - break; - case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */ - if (chip != tmc1800 && !current_SC->SCp.have_data_in) { - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, TMC_Cntl_port); - } - break; - case 0x0c: /* STATUS IN */ - current_SC->SCp.Status = inb(Read_SCSI_Data_port); -#if EVERY_ACCESS - printk("Status = %x, ", current_SC->SCp.Status); -#endif -#if ERRORS_ONLY - if (current_SC->SCp.Status && current_SC->SCp.Status != 2 && current_SC->SCp.Status != 8) { - printk("ERROR fd_mcs: target = %d, command = %x, status = %x\n", current_SC->device->id, current_SC->cmnd[0], current_SC->SCp.Status); - } -#endif - break; - case 0x0a: /* MESSAGE OUT */ - outb(MESSAGE_REJECT, Write_SCSI_Data_port); /* Reject */ - break; - case 0x0e: /* MESSAGE IN */ - current_SC->SCp.Message = inb(Read_SCSI_Data_port); -#if EVERY_ACCESS - printk("Message = %x, ", current_SC->SCp.Message); -#endif - if (!current_SC->SCp.Message) - ++done; -#if DEBUG_MESSAGES || EVERY_ACCESS - if (current_SC->SCp.Message) { - printk("fd_mcs: message = %x\n", current_SC->SCp.Message); - } -#endif - break; - } - } - - if (chip == tmc1800 && !current_SC->SCp.have_data_in && (current_SC->SCp.sent_command >= current_SC->cmd_len)) { - /* We have to get the FIFO direction - correct, so I've made a table based - on the SCSI Standard of which commands - appear to require a DATA OUT phase. - */ - /* - p. 94: Command for all device types - CHANGE DEFINITION 40 DATA OUT - COMPARE 39 DATA OUT - COPY 18 DATA OUT - COPY AND VERIFY 3a DATA OUT - INQUIRY 12 - LOG SELECT 4c DATA OUT - LOG SENSE 4d - MODE SELECT (6) 15 DATA OUT - MODE SELECT (10) 55 DATA OUT - MODE SENSE (6) 1a - MODE SENSE (10) 5a - READ BUFFER 3c - RECEIVE DIAGNOSTIC RESULTS 1c - REQUEST SENSE 03 - SEND DIAGNOSTIC 1d DATA OUT - TEST UNIT READY 00 - WRITE BUFFER 3b DATA OUT - - p.178: Commands for direct-access devices (not listed on p. 94) - FORMAT UNIT 04 DATA OUT - LOCK-UNLOCK CACHE 36 - PRE-FETCH 34 - PREVENT-ALLOW MEDIUM REMOVAL 1e - READ (6)/RECEIVE 08 - READ (10) 3c - READ CAPACITY 25 - READ DEFECT DATA (10) 37 - READ LONG 3e - REASSIGN BLOCKS 07 DATA OUT - RELEASE 17 - RESERVE 16 DATA OUT - REZERO UNIT/REWIND 01 - SEARCH DATA EQUAL (10) 31 DATA OUT - SEARCH DATA HIGH (10) 30 DATA OUT - SEARCH DATA LOW (10) 32 DATA OUT - SEEK (6) 0b - SEEK (10) 2b - SET LIMITS (10) 33 - START STOP UNIT 1b - SYNCHRONIZE CACHE 35 - VERIFY (10) 2f - WRITE (6)/PRINT/SEND 0a DATA OUT - WRITE (10)/SEND 2a DATA OUT - WRITE AND VERIFY (10) 2e DATA OUT - WRITE LONG 3f DATA OUT - WRITE SAME 41 DATA OUT ? - - p. 261: Commands for sequential-access devices (not previously listed) - ERASE 19 - LOAD UNLOAD 1b - LOCATE 2b - READ BLOCK LIMITS 05 - READ POSITION 34 - READ REVERSE 0f - RECOVER BUFFERED DATA 14 - SPACE 11 - WRITE FILEMARKS 10 ? - - p. 298: Commands for printer devices (not previously listed) - ****** NOT SUPPORTED BY THIS DRIVER, since 0b is SEEK (6) ***** - SLEW AND PRINT 0b DATA OUT -- same as seek - STOP PRINT 1b - SYNCHRONIZE BUFFER 10 - - p. 315: Commands for processor devices (not previously listed) - - p. 321: Commands for write-once devices (not previously listed) - MEDIUM SCAN 38 - READ (12) a8 - SEARCH DATA EQUAL (12) b1 DATA OUT - SEARCH DATA HIGH (12) b0 DATA OUT - SEARCH DATA LOW (12) b2 DATA OUT - SET LIMITS (12) b3 - VERIFY (12) af - WRITE (12) aa DATA OUT - WRITE AND VERIFY (12) ae DATA OUT - - p. 332: Commands for CD-ROM devices (not previously listed) - PAUSE/RESUME 4b - PLAY AUDIO (10) 45 - PLAY AUDIO (12) a5 - PLAY AUDIO MSF 47 - PLAY TRACK RELATIVE (10) 49 - PLAY TRACK RELATIVE (12) a9 - READ HEADER 44 - READ SUB-CHANNEL 42 - READ TOC 43 - - p. 370: Commands for scanner devices (not previously listed) - GET DATA BUFFER STATUS 34 - GET WINDOW 25 - OBJECT POSITION 31 - SCAN 1b - SET WINDOW 24 DATA OUT - - p. 391: Commands for optical memory devices (not listed) - ERASE (10) 2c - ERASE (12) ac - MEDIUM SCAN 38 DATA OUT - READ DEFECT DATA (12) b7 - READ GENERATION 29 - READ UPDATED BLOCK 2d - UPDATE BLOCK 3d DATA OUT - - p. 419: Commands for medium changer devices (not listed) - EXCHANGE MEDIUM 46 - INITIALIZE ELEMENT STATUS 07 - MOVE MEDIUM a5 - POSITION TO ELEMENT 2b - READ ELEMENT STATUS b8 - REQUEST VOL. ELEMENT ADDRESS b5 - SEND VOLUME TAG b6 DATA OUT - - p. 454: Commands for communications devices (not listed previously) - GET MESSAGE (6) 08 - GET MESSAGE (10) 28 - GET MESSAGE (12) a8 - */ - - switch (current_SC->cmnd[0]) { - case CHANGE_DEFINITION: - case COMPARE: - case COPY: - case COPY_VERIFY: - case LOG_SELECT: - case MODE_SELECT: - case MODE_SELECT_10: - case SEND_DIAGNOSTIC: - case WRITE_BUFFER: - - case FORMAT_UNIT: - case REASSIGN_BLOCKS: - case RESERVE: - case SEARCH_EQUAL: - case SEARCH_HIGH: - case SEARCH_LOW: - case WRITE_6: - case WRITE_10: - case WRITE_VERIFY: - case 0x3f: - case 0x41: - - case 0xb1: - case 0xb0: - case 0xb2: - case 0xaa: - case 0xae: - - case 0x24: - - case 0x38: - case 0x3d: - - case 0xb6: - - case 0xea: /* alternate number for WRITE LONG */ - - current_SC->SCp.have_data_in = -1; - outb(0xd0 | PARITY_MASK, TMC_Cntl_port); - break; - - case 0x00: - default: - - current_SC->SCp.have_data_in = 1; - outb(0x90 | PARITY_MASK, TMC_Cntl_port); - break; - } - } - - if (current_SC->SCp.have_data_in == -1) { /* DATA OUT */ - while ((data_count = FIFO_Size - inw(FIFO_Data_Count_port)) > 512) { -#if EVERY_ACCESS - printk("DC=%d, ", data_count); -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count > 0) { -#if EVERY_ACCESS - printk("%d OUT, ", data_count); -#endif - if (data_count == 1) { - Bytes_Written++; - - outb(*current_SC->SCp.ptr++, Write_FIFO_port); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; - tmp_count = data_count << 1; - outsw(Write_FIFO_port, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += tmp_count; - Bytes_Written += tmp_count; - current_SC->SCp.this_residual -= tmp_count; - } - } - if (!current_SC->SCp.this_residual) { - if (current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } else - break; - } - } - } else if (current_SC->SCp.have_data_in == 1) { /* DATA IN */ - while ((data_count = inw(FIFO_Data_Count_port)) > 0) { -#if EVERY_ACCESS - printk("DC=%d, ", data_count); -#endif - if (data_count > current_SC->SCp.this_residual) - data_count = current_SC->SCp.this_residual; - if (data_count) { -#if EVERY_ACCESS - printk("%d IN, ", data_count); -#endif - if (data_count == 1) { - Bytes_Read++; - *current_SC->SCp.ptr++ = inb(Read_FIFO_port); - --current_SC->SCp.this_residual; - } else { - data_count >>= 1; /* Number of words */ - tmp_count = data_count << 1; - insw(Read_FIFO_port, current_SC->SCp.ptr, data_count); - current_SC->SCp.ptr += tmp_count; - Bytes_Read += tmp_count; - current_SC->SCp.this_residual -= tmp_count; - } - } - if (!current_SC->SCp.this_residual && current_SC->SCp.buffers_residual) { - --current_SC->SCp.buffers_residual; - ++current_SC->SCp.buffer; - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - } - } - } - - if (done) { -#if EVERY_ACCESS - printk(" ** IN DONE %d ** ", current_SC->SCp.have_data_in); -#endif - -#if EVERY_ACCESS - printk("BEFORE MY_DONE. . ."); -#endif - spin_lock_irqsave(shpnt->host_lock, flags); - my_done(shpnt, (current_SC->SCp.Status & 0xff) - | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16)); - spin_unlock_irqrestore(shpnt->host_lock, flags); -#if EVERY_ACCESS - printk("RETURNING.\n"); -#endif - - } else { - if (current_SC->SCp.phase & disconnect) { - outb(0xd0 | FIFO_COUNT, Interrupt_Cntl_port); - outb(0x00, SCSI_Cntl_port); - } else { - outb(0x90 | FIFO_COUNT, Interrupt_Cntl_port); - } - } -#if DEBUG_RACE - in_interrupt_flag = 0; -#endif - return IRQ_HANDLED; -} - -static int fd_mcs_release(struct Scsi_Host *shpnt) -{ - int i, this_host, irq_usage; - - release_region(shpnt->io_port, shpnt->n_io_port); - - this_host = -1; - irq_usage = 0; - for (i = 0; i < found; i++) { - if (shpnt == hosts[i]) - this_host = i; - if (shpnt->irq == hosts[i]->irq) - irq_usage++; - } - - /* only for the last one */ - if (1 == irq_usage) - free_irq(shpnt->irq, hosts); - - found--; - - for (i = this_host; i < found; i++) - hosts[i] = hosts[i + 1]; - - hosts[found] = NULL; - - return 0; -} - -static int fd_mcs_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) -{ - struct Scsi_Host *shpnt = SCpnt->device->host; - - if (in_command) { - panic("fd_mcs: fd_mcs_queue() NOT REENTRANT!\n"); - } -#if EVERY_ACCESS - printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->target, *(unsigned char *) SCpnt->cmnd, - scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); -#endif - - fd_mcs_make_bus_idle(shpnt); - - SCpnt->scsi_done = done; /* Save this for the done function */ - current_SC = SCpnt; - - /* Initialize static data */ - - if (scsi_bufflen(current_SC)) { - current_SC->SCp.buffer = scsi_sglist(current_SC); - current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); - current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1; - } else { - current_SC->SCp.ptr = NULL; - current_SC->SCp.this_residual = 0; - current_SC->SCp.buffer = NULL; - current_SC->SCp.buffers_residual = 0; - } - - - current_SC->SCp.Status = 0; - current_SC->SCp.Message = 0; - current_SC->SCp.have_data_in = 0; - current_SC->SCp.sent_command = 0; - current_SC->SCp.phase = in_arbitration; - - /* Start arbitration */ - outb(0x00, Interrupt_Cntl_port); - outb(0x00, SCSI_Cntl_port); /* Disable data drivers */ - outb(adapter_mask, SCSI_Data_NoACK_port); /* Set our id bit */ - in_command = 1; - outb(0x20, Interrupt_Cntl_port); - outb(0x14 | PARITY_MASK, TMC_Cntl_port); /* Start arbitration */ - - return 0; -} - -static DEF_SCSI_QCMD(fd_mcs_queue) - -#if DEBUG_ABORT || DEBUG_RESET -static void fd_mcs_print_info(Scsi_Cmnd * SCpnt) -{ - unsigned int imr; - unsigned int irr; - unsigned int isr; - struct Scsi_Host *shpnt = SCpnt->host; - - if (!SCpnt || !SCpnt->host) { - printk("fd_mcs: cannot provide detailed information\n"); - } - - printk("%s\n", fd_mcs_info(SCpnt->host)); - print_banner(SCpnt->host); - switch (SCpnt->SCp.phase) { - case in_arbitration: - printk("arbitration "); - break; - case in_selection: - printk("selection "); - break; - case in_other: - printk("other "); - break; - default: - printk("unknown "); - break; - } - - printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", - SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, - scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); - printk("sent_command = %d, have_data_in = %d, timeout = %d\n", SCpnt->SCp.sent_command, SCpnt->SCp.have_data_in, SCpnt->timeout); -#if DEBUG_RACE - printk("in_interrupt_flag = %d\n", in_interrupt_flag); -#endif - - imr = (inb(0x0a1) << 8) + inb(0x21); - outb(0x0a, 0xa0); - irr = inb(0xa0) << 8; - outb(0x0a, 0x20); - irr += inb(0x20); - outb(0x0b, 0xa0); - isr = inb(0xa0) << 8; - outb(0x0b, 0x20); - isr += inb(0x20); - - /* Print out interesting information */ - printk("IMR = 0x%04x", imr); - if (imr & (1 << shpnt->irq)) - printk(" (masked)"); - printk(", IRR = 0x%04x, ISR = 0x%04x\n", irr, isr); - - printk("SCSI Status = 0x%02x\n", inb(SCSI_Status_port)); - printk("TMC Status = 0x%02x", inb(TMC_Status_port)); - if (inb(TMC_Status_port) & 1) - printk(" (interrupt)"); - printk("\n"); - printk("Interrupt Status = 0x%02x", inb(Interrupt_Status_port)); - if (inb(Interrupt_Status_port) & 0x08) - printk(" (enabled)"); - printk("\n"); - if (chip == tmc18c50 || chip == tmc18c30) { - printk("FIFO Status = 0x%02x\n", inb(shpnt->io_port + FIFO_Status)); - printk("Int. Condition = 0x%02x\n", inb(shpnt->io_port + Interrupt_Cond)); - } - printk("Configuration 1 = 0x%02x\n", inb(shpnt->io_port + Configuration1)); - if (chip == tmc18c50 || chip == tmc18c30) - printk("Configuration 2 = 0x%02x\n", inb(shpnt->io_port + Configuration2)); -} -#endif - -static int fd_mcs_abort(Scsi_Cmnd * SCpnt) -{ - struct Scsi_Host *shpnt = SCpnt->device->host; - - unsigned long flags; -#if EVERY_ACCESS || ERRORS_ONLY || DEBUG_ABORT - printk("fd_mcs: abort "); -#endif - - spin_lock_irqsave(shpnt->host_lock, flags); - if (!in_command) { -#if EVERY_ACCESS || ERRORS_ONLY - printk(" (not in command)\n"); -#endif - spin_unlock_irqrestore(shpnt->host_lock, flags); - return FAILED; - } else - printk("\n"); - -#if DEBUG_ABORT - fd_mcs_print_info(SCpnt); -#endif - - fd_mcs_make_bus_idle(shpnt); - - current_SC->SCp.phase |= aborted; - - current_SC->result = DID_ABORT << 16; - - /* Aborts are not done well. . . */ - my_done(shpnt, DID_ABORT << 16); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - return SUCCESS; -} - -static int fd_mcs_bus_reset(Scsi_Cmnd * SCpnt) { - struct Scsi_Host *shpnt = SCpnt->device->host; - unsigned long flags; - -#if DEBUG_RESET - static int called_once = 0; -#endif - -#if ERRORS_ONLY - if (SCpnt) - printk("fd_mcs: SCSI Bus Reset\n"); -#endif - -#if DEBUG_RESET - if (called_once) - fd_mcs_print_info(current_SC); - called_once = 1; -#endif - - spin_lock_irqsave(shpnt->host_lock, flags); - - outb(1, SCSI_Cntl_port); - do_pause(2); - outb(0, SCSI_Cntl_port); - do_pause(115); - outb(0, SCSI_Mode_Cntl_port); - outb(PARITY_MASK, TMC_Cntl_port); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - - /* Unless this is the very first call (i.e., SCPnt == NULL), everything - is probably hosed at this point. We will, however, try to keep - things going by informing the high-level code that we need help. */ - return SUCCESS; -} - -#include <scsi/scsi_ioctl.h> - -static int fd_mcs_biosparam(struct scsi_device * disk, struct block_device *bdev, - sector_t capacity, int *info_array) -{ - unsigned char *p = scsi_bios_ptable(bdev); - int size = capacity; - - /* BIOS >= 3.4 for MCA cards */ - /* This algorithm was provided by Future Domain (much thanks!). */ - - if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */ - && p[4]) { /* Partition type */ - /* The partition table layout is as follows: - - Start: 0x1b3h - Offset: 0 = partition status - 1 = starting head - 2 = starting sector and cylinder (word, encoded) - 4 = partition type - 5 = ending head - 6 = ending sector and cylinder (word, encoded) - 8 = starting absolute sector (double word) - c = number of sectors (double word) - Signature: 0x1fe = 0x55aa - - So, this algorithm assumes: - 1) the first partition table is in use, - 2) the data in the first entry is correct, and - 3) partitions never divide cylinders - - Note that (1) may be FALSE for NetBSD (and other BSD flavors), - as well as for Linux. Note also, that Linux doesn't pay any - attention to the fields that are used by this algorithm -- it - only uses the absolute sector data. Recent versions of Linux's - fdisk(1) will fill this data in correctly, and forthcoming - versions will check for consistency. - - Checking for a non-zero partition type is not part of the - Future Domain algorithm, but it seemed to be a reasonable thing - to do, especially in the Linux and BSD worlds. */ - - info_array[0] = p[5] + 1; /* heads */ - info_array[1] = p[6] & 0x3f; /* sectors */ - } else { - /* Note that this new method guarantees that there will always be - less than 1024 cylinders on a platter. This is good for drives - up to approximately 7.85GB (where 1GB = 1024 * 1024 kB). */ - if ((unsigned int) size >= 0x7e0000U) - { - info_array[0] = 0xff; /* heads = 255 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else if ((unsigned int) size >= 0x200000U) { - info_array[0] = 0x80; /* heads = 128 */ - info_array[1] = 0x3f; /* sectors = 63 */ - } else { - info_array[0] = 0x40; /* heads = 64 */ - info_array[1] = 0x20; /* sectors = 32 */ - } - } - /* For both methods, compute the cylinders */ - info_array[2] = (unsigned int) size / (info_array[0] * info_array[1]); - kfree(p); - return 0; -} - -static struct scsi_host_template driver_template = { - .proc_name = "fd_mcs", - .proc_info = fd_mcs_proc_info, - .detect = fd_mcs_detect, - .release = fd_mcs_release, - .info = fd_mcs_info, - .queuecommand = fd_mcs_queue, - .eh_abort_handler = fd_mcs_abort, - .eh_bus_reset_handler = fd_mcs_bus_reset, - .bios_param = fd_mcs_biosparam, - .can_queue = 1, - .this_id = 7, - .sg_tablesize = 64, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c deleted file mode 100644 index cd09132d5d7d..000000000000 --- a/drivers/scsi/ibmmca.c +++ /dev/null @@ -1,2379 +0,0 @@ -/* - Low Level Linux Driver for the IBM Microchannel SCSI Subsystem for - Linux Kernel >= 2.4.0. - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Written by Martin Kolinek, December 1995. - Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang - See the file Documentation/scsi/ibmmca.txt for a detailed description - of this driver, the commandline arguments and the history of its - development. - See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest - updates, info and ADF-files for adapters supported by this driver. - - Alan Cox <alan@lxorguk.ukuu.org.uk> - Updated for Linux 2.5.45 to use the new error handler, cleaned up the - lock macros and did a few unavoidable locking tweaks, plus one locking - fix in the irq and completion path. - - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/mca.h> -#include <linux/spinlock.h> -#include <linux/init.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -/* Common forward declarations for all Linux-versions: */ -static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *); -static int ibmmca_abort (Scsi_Cmnd *); -static int ibmmca_host_reset (Scsi_Cmnd *); -static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *); -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout); - - - -/* current version of this driver-source: */ -#define IBMMCA_SCSI_DRIVER_VERSION "4.0b-ac" - -/* driver configuration */ -#define IM_MAX_HOSTS 8 /* maximum number of host adapters */ -#define IM_RESET_DELAY 60 /* seconds allowed for a reset */ - -/* driver debugging - #undef all for normal operation */ -/* if defined: count interrupts and ignore this special one: */ -#undef IM_DEBUG_TIMEOUT //50 -#define TIMEOUT_PUN 0 -#define TIMEOUT_LUN 0 -/* verbose interrupt: */ -#undef IM_DEBUG_INT -/* verbose queuecommand: */ -#undef IM_DEBUG_CMD -/* verbose queucommand for specific SCSI-device type: */ -#undef IM_DEBUG_CMD_SPEC_DEV -/* verbose device probing */ -#undef IM_DEBUG_PROBE - -/* device type that shall be displayed on syslog (only during debugging): */ -#define IM_DEBUG_CMD_DEVICE TYPE_TAPE - -/* relative addresses of hardware registers on a subsystem */ -#define IM_CMD_REG(h) ((h)->io_port) /*Command Interface, (4 bytes long) */ -#define IM_ATTN_REG(h) ((h)->io_port+4) /*Attention (1 byte) */ -#define IM_CTR_REG(h) ((h)->io_port+5) /*Basic Control (1 byte) */ -#define IM_INTR_REG(h) ((h)->io_port+6) /*Interrupt Status (1 byte, r/o) */ -#define IM_STAT_REG(h) ((h)->io_port+7) /*Basic Status (1 byte, read only) */ - -/* basic I/O-port of first adapter */ -#define IM_IO_PORT 0x3540 -/* maximum number of hosts that can be found */ -#define IM_N_IO_PORT 8 - -/*requests going into the upper nibble of the Attention register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_IMM_CMD 0x10 /*immediate command */ -#define IM_SCB 0x30 /*Subsystem Control Block command */ -#define IM_LONG_SCB 0x40 /*long Subsystem Control Block command */ -#define IM_EOI 0xe0 /*end-of-interrupt request */ - -/*values for bits 7,1,0 of Basic Control reg. (bits 6-2 reserved) */ -#define IM_HW_RESET 0x80 /*hardware reset */ -#define IM_ENABLE_DMA 0x02 /*enable subsystem's busmaster DMA */ -#define IM_ENABLE_INTR 0x01 /*enable interrupts to the system */ - -/*to interpret the upper nibble of Interrupt Status register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_SCB_CMD_COMPLETED 0x10 -#define IM_SCB_CMD_COMPLETED_WITH_RETRIES 0x50 -#define IM_LOOP_SCATTER_BUFFER_FULL 0x60 -#define IM_ADAPTER_HW_FAILURE 0x70 -#define IM_IMMEDIATE_CMD_COMPLETED 0xa0 -#define IM_CMD_COMPLETED_WITH_FAILURE 0xc0 -#define IM_CMD_ERROR 0xe0 -#define IM_SOFTWARE_SEQUENCING_ERROR 0xf0 - -/*to interpret bits 3-0 of Basic Status register (bits 7-4 reserved) */ -#define IM_CMD_REG_FULL 0x08 -#define IM_CMD_REG_EMPTY 0x04 -#define IM_INTR_REQUEST 0x02 -#define IM_BUSY 0x01 - -/*immediate commands (word written into low 2 bytes of command reg) */ -#define IM_RESET_IMM_CMD 0x0400 -#define IM_FEATURE_CTR_IMM_CMD 0x040c -#define IM_DMA_PACING_IMM_CMD 0x040d -#define IM_ASSIGN_IMM_CMD 0x040e -#define IM_ABORT_IMM_CMD 0x040f -#define IM_FORMAT_PREP_IMM_CMD 0x0417 - -/*SCB (Subsystem Control Block) structure */ -struct im_scb { - unsigned short command; /*command word (read, etc.) */ - unsigned short enable; /*enable word, modifies cmd */ - union { - unsigned long log_blk_adr; /*block address on SCSI device */ - unsigned char scsi_cmd_length; /*6,10,12, for other scsi cmd */ - } u1; - unsigned long sys_buf_adr; /*physical system memory adr */ - unsigned long sys_buf_length; /*size of sys mem buffer */ - unsigned long tsb_adr; /*Termination Status Block adr */ - unsigned long scb_chain_adr; /*optional SCB chain address */ - union { - struct { - unsigned short count; /*block count, on SCSI device */ - unsigned short length; /*block length, on SCSI device */ - } blk; - unsigned char scsi_command[12]; /*other scsi command */ - } u2; -}; - -/*structure scatter-gather element (for list of system memory areas) */ -struct im_sge { - void *address; - unsigned long byte_length; -}; - -/*structure returned by a get_pos_info command: */ -struct im_pos_info { - unsigned short pos_id; /* adapter id */ - unsigned char pos_3a; /* pos 3 (if pos 6 = 0) */ - unsigned char pos_2; /* pos 2 */ - unsigned char int_level; /* interrupt level IRQ 11 or 14 */ - unsigned char pos_4a; /* pos 4 (if pos 6 = 0) */ - unsigned short connector_size; /* MCA connector size: 16 or 32 Bit */ - unsigned char num_luns; /* number of supported luns per device */ - unsigned char num_puns; /* number of supported puns */ - unsigned char pacing_factor; /* pacing factor */ - unsigned char num_ldns; /* number of ldns available */ - unsigned char eoi_off; /* time EOI and interrupt inactive */ - unsigned char max_busy; /* time between reset and busy on */ - unsigned short cache_stat; /* ldn cachestat. Bit=1 = not cached */ - unsigned short retry_stat; /* retry status of ldns. Bit=1=disabled */ - unsigned char pos_4b; /* pos 4 (if pos 6 = 1) */ - unsigned char pos_3b; /* pos 3 (if pos 6 = 1) */ - unsigned char pos_6; /* pos 6 */ - unsigned char pos_5; /* pos 5 */ - unsigned short max_overlap; /* maximum overlapping requests */ - unsigned short num_bus; /* number of SCSI-busses */ -}; - -/*values for SCB command word */ -#define IM_NO_SYNCHRONOUS 0x0040 /*flag for any command */ -#define IM_NO_DISCONNECT 0x0080 /*flag for any command */ -#define IM_READ_DATA_CMD 0x1c01 -#define IM_WRITE_DATA_CMD 0x1c02 -#define IM_READ_VERIFY_CMD 0x1c03 -#define IM_WRITE_VERIFY_CMD 0x1c04 -#define IM_REQUEST_SENSE_CMD 0x1c08 -#define IM_READ_CAPACITY_CMD 0x1c09 -#define IM_DEVICE_INQUIRY_CMD 0x1c0b -#define IM_READ_LOGICAL_CMD 0x1c2a -#define IM_OTHER_SCSI_CMD_CMD 0x241f - -/* unused, but supported, SCB commands */ -#define IM_GET_COMMAND_COMPLETE_STATUS_CMD 0x1c07 /* command status */ -#define IM_GET_POS_INFO_CMD 0x1c0a /* returns neat stuff */ -#define IM_READ_PREFETCH_CMD 0x1c31 /* caching controller only */ -#define IM_FOMAT_UNIT_CMD 0x1c16 /* format unit */ -#define IM_REASSIGN_BLOCK_CMD 0x1c18 /* in case of error */ - -/*values to set bits in the enable word of SCB */ -#define IM_READ_CONTROL 0x8000 -#define IM_REPORT_TSB_ONLY_ON_ERROR 0x4000 -#define IM_RETRY_ENABLE 0x2000 -#define IM_POINTER_TO_LIST 0x1000 -#define IM_SUPRESS_EXCEPTION_SHORT 0x0400 -#define IM_BYPASS_BUFFER 0x0200 -#define IM_CHAIN_ON_NO_ERROR 0x0001 - -/*TSB (Termination Status Block) structure */ -struct im_tsb { - unsigned short end_status; - unsigned short reserved1; - unsigned long residual_byte_count; - unsigned long sg_list_element_adr; - unsigned short status_length; - unsigned char dev_status; - unsigned char cmd_status; - unsigned char dev_error; - unsigned char cmd_error; - unsigned short reserved2; - unsigned short reserved3; - unsigned short low_of_last_scb_adr; - unsigned short high_of_last_scb_adr; -}; - -/*subsystem uses interrupt request level 14 */ -#define IM_IRQ 14 -/*SCSI-2 F/W may evade to interrupt 11 */ -#define IM_IRQ_FW 11 - -/* Model 95 has an additional alphanumeric display, which can be used - to display SCSI-activities. 8595 models do not have any disk led, which - makes this feature quite useful. - The regular PS/2 disk led is turned on/off by bits 6,7 of system - control port. */ - -/* LED display-port (actually, last LED on display) */ -#define MOD95_LED_PORT 0x108 -/* system-control-register of PS/2s with diskindicator */ -#define PS2_SYS_CTR 0x92 -/* activity displaying methods */ -#define LED_DISP 1 -#define LED_ADISP 2 -#define LED_ACTIVITY 4 -/* failed intr */ -#define CMD_FAIL 255 - -/* The SCSI-ID(!) of the accessed SCSI-device is shown on PS/2-95 machines' LED - displays. ldn is no longer displayed here, because the ldn mapping is now - done dynamically and the ldn <-> pun,lun maps can be looked-up at boottime - or during uptime in /proc/scsi/ibmmca/<host_no> in case of trouble, - interest, debugging or just for having fun. The left number gives the - host-adapter number and the right shows the accessed SCSI-ID. */ - -/* display_mode is set by the ibmmcascsi= command line arg */ -static int display_mode = 0; -/* set default adapter timeout */ -static unsigned int adapter_timeout = 45; -/* for probing on feature-command: */ -static unsigned int global_command_error_excuse = 0; -/* global setting by command line for adapter_speed */ -static int global_adapter_speed = 0; /* full speed by default */ - -/* Panel / LED on, do it right for F/W addressin, too. adisplay will - * just ignore ids>7, as the panel has only 7 digits available */ -#define PS2_DISK_LED_ON(ad,id) { if (display_mode & LED_DISP) { if (id>9) \ - outw((ad+48)|((id+55)<<8), MOD95_LED_PORT ); else \ - outw((ad+48)|((id+48)<<8), MOD95_LED_PORT ); } else \ - if (display_mode & LED_ADISP) { if (id<7) outb((char)(id+48),MOD95_LED_PORT+1+id); \ - outb((char)(ad+48), MOD95_LED_PORT); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); } - -/* Panel / LED off */ -/* bug fixed, Dec 15, 1997, where | was replaced by & here */ -#define PS2_DISK_LED_OFF() { if (display_mode & LED_DISP) \ - outw(0x2020, MOD95_LED_PORT ); else if (display_mode & LED_ADISP) { \ - outl(0x20202020,MOD95_LED_PORT); outl(0x20202020,MOD95_LED_PORT+4); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); } - -/* types of different supported hardware that goes to hostdata special */ -#define IBM_SCSI2_FW 0 -#define IBM_7568_WCACHE 1 -#define IBM_EXP_UNIT 2 -#define IBM_SCSI_WCACHE 3 -#define IBM_SCSI 4 -#define IBM_INTEGSCSI 5 - -/* other special flags for hostdata structure */ -#define FORCED_DETECTION 100 -#define INTEGRATED_SCSI 101 - -/* List of possible IBM-SCSI-adapters */ -static short ibmmca_id_table[] = { - 0x8efc, - 0x8efd, - 0x8ef8, - 0x8eff, - 0x8efe, - /* No entry for integrated SCSI, that's part of the register */ - 0 -}; - -static const char *ibmmca_description[] = { - "IBM SCSI-2 F/W Adapter", /* special = 0 */ - "IBM 7568 Industrial Computer SCSI Adapter w/Cache", /* special = 1 */ - "IBM Expansion Unit SCSI Controller", /* special = 2 */ - "IBM SCSI Adapter w/Cache", /* special = 3 */ - "IBM SCSI Adapter", /* special = 4 */ - "IBM Integrated SCSI Controller", /* special = 5 */ -}; - -/* Max number of logical devices (can be up from 0 to 14). 15 is the address -of the adapter itself. */ -#define MAX_LOG_DEV 15 - -/*local data for a logical device */ -struct logical_device { - struct im_scb scb; /* SCSI-subsystem-control-block structure */ - struct im_tsb tsb; /* SCSI command complete status block structure */ - struct im_sge sge[16]; /* scatter gather list structure */ - unsigned char buf[256]; /* SCSI command return data buffer */ - Scsi_Cmnd *cmd; /* SCSI-command that is currently in progress */ - int device_type; /* type of the SCSI-device. See include/scsi/scsi.h - for interpretation of the possible values */ - int block_length; /* blocksize of a particular logical SCSI-device */ - int cache_flag; /* 1 if this is uncached, 0 if cache is present for ldn */ - int retry_flag; /* 1 if adapter retry is disabled, 0 if enabled */ -}; - -/* statistics of the driver during operations (for proc_info) */ -struct Driver_Statistics { - /* SCSI statistics on the adapter */ - int ldn_access[MAX_LOG_DEV + 1]; /* total accesses on a ldn */ - int ldn_read_access[MAX_LOG_DEV + 1]; /* total read-access on a ldn */ - int ldn_write_access[MAX_LOG_DEV + 1]; /* total write-access on a ldn */ - int ldn_inquiry_access[MAX_LOG_DEV + 1]; /* total inquiries on a ldn */ - int ldn_modeselect_access[MAX_LOG_DEV + 1]; /* total mode selects on ldn */ - int scbs; /* short SCBs queued */ - int long_scbs; /* long SCBs queued */ - int total_accesses; /* total accesses on all ldns */ - int total_interrupts; /* total interrupts (should be - same as total_accesses) */ - int total_errors; /* command completed with error */ - /* dynamical assignment statistics */ - int total_scsi_devices; /* number of physical pun,lun */ - int dyn_flag; /* flag showing dynamical mode */ - int dynamical_assignments; /* number of remappings of ldns */ - int ldn_assignments[MAX_LOG_DEV + 1]; /* number of remappings of each - ldn */ -}; - -/* data structure for each host adapter */ -struct ibmmca_hostdata { - /* array of logical devices: */ - struct logical_device _ld[MAX_LOG_DEV + 1]; - /* array to convert (pun, lun) into logical device number: */ - unsigned char _get_ldn[16][8]; - /*array that contains the information about the physical SCSI-devices - attached to this host adapter: */ - unsigned char _get_scsi[16][8]; - /* used only when checking logical devices: */ - int _local_checking_phase_flag; - /* report received interrupt: */ - int _got_interrupt; - /* report termination-status of SCSI-command: */ - int _stat_result; - /* reset status (used only when doing reset): */ - int _reset_status; - /* code of the last SCSI command (needed for panic info): */ - int _last_scsi_command[MAX_LOG_DEV + 1]; - /* identifier of the last SCSI-command type */ - int _last_scsi_type[MAX_LOG_DEV + 1]; - /* last blockcount */ - int _last_scsi_blockcount[MAX_LOG_DEV + 1]; - /* last locgical block address */ - unsigned long _last_scsi_logical_block[MAX_LOG_DEV + 1]; - /* Counter that points on the next reassignable ldn for dynamical - remapping. The default value is 7, that is the first reassignable - number in the list at boottime: */ - int _next_ldn; - /* Statistics-structure for this IBM-SCSI-host: */ - struct Driver_Statistics _IBM_DS; - /* This hostadapters pos-registers pos2 until pos6 */ - unsigned int _pos[8]; - /* assign a special variable, that contains dedicated info about the - adaptertype */ - int _special; - /* connector size on the MCA bus */ - int _connector_size; - /* synchronous SCSI transfer rate bitpattern */ - int _adapter_speed; -}; - -/* macros to access host data structure */ -#define subsystem_pun(h) ((h)->this_id) -#define subsystem_maxid(h) ((h)->max_id) -#define ld(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_ld) -#define get_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_ldn) -#define get_scsi(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_scsi) -#define local_checking_phase_flag(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_local_checking_phase_flag) -#define got_interrupt(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_got_interrupt) -#define stat_result(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_stat_result) -#define reset_status(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_reset_status) -#define last_scsi_command(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_command) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define last_scsi_blockcount(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_blockcount) -#define last_scsi_logical_block(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_logical_block) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define next_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_next_ldn) -#define IBM_DS(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_IBM_DS) -#define special(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_special) -#define subsystem_connector_size(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_connector_size) -#define adapter_speed(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_adapter_speed) -#define pos2(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[2]) -#define pos3(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[3]) -#define pos4(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[4]) -#define pos5(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[5]) -#define pos6(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[6]) - -/* Define a arbitrary number as subsystem-marker-type. This number is, as - described in the ANSI-SCSI-standard, not occupied by other device-types. */ -#define TYPE_IBM_SCSI_ADAPTER 0x2F - -/* Define 0xFF for no device type, because this type is not defined within - the ANSI-SCSI-standard, therefore, it can be used and should not cause any - harm. */ -#define TYPE_NO_DEVICE 0xFF - -/* define medium-changer. If this is not defined previously, e.g. Linux - 2.0.x, define this type here. */ -#ifndef TYPE_MEDIUM_CHANGER -#define TYPE_MEDIUM_CHANGER 0x08 -#endif - -/* define possible operations for the immediate_assign command */ -#define SET_LDN 0 -#define REMOVE_LDN 1 - -/* ldn which is used to probe the SCSI devices */ -#define PROBE_LDN 0 - -/* reset status flag contents */ -#define IM_RESET_NOT_IN_PROGRESS 0 -#define IM_RESET_IN_PROGRESS 1 -#define IM_RESET_FINISHED_OK 2 -#define IM_RESET_FINISHED_FAIL 3 -#define IM_RESET_NOT_IN_PROGRESS_NO_INT 4 -#define IM_RESET_FINISHED_OK_NO_INT 5 - -/* define undefined SCSI-command */ -#define NO_SCSI 0xffff - -/*-----------------------------------------------------------------------*/ - -/* if this is nonzero, ibmmcascsi option has been passed to the kernel */ -static int io_port[IM_MAX_HOSTS] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -static int scsi_id[IM_MAX_HOSTS] = { 7, 7, 7, 7, 7, 7, 7, 7 }; - -/* fill module-parameters only, when this define is present. - (that is kernel version 2.1.x) */ -#if defined(MODULE) -static char *boot_options = NULL; -module_param(boot_options, charp, 0); -module_param_array(io_port, int, NULL, 0); -module_param_array(scsi_id, int, NULL, 0); - -MODULE_LICENSE("GPL"); -#endif -/*counter of concurrent disk read/writes, to turn on/off disk led */ -static int disk_rw_in_progress = 0; - -static unsigned int pos[8]; /* whole pos register-line for diagnosis */ -/* Taking into account the additions, made by ZP Gu. - * This selects now the preset value from the configfile and - * offers the 'normal' commandline option to be accepted */ -#ifdef CONFIG_IBMMCA_SCSI_ORDER_STANDARD -static char ibm_ansi_order = 1; -#else -static char ibm_ansi_order = 0; -#endif - -static void issue_cmd(struct Scsi_Host *, unsigned long, unsigned char); -static void internal_done(Scsi_Cmnd * cmd); -static void check_devices(struct Scsi_Host *, int); -static int immediate_assign(struct Scsi_Host *, unsigned int, unsigned int, unsigned int, unsigned int); -static int immediate_feature(struct Scsi_Host *, unsigned int, unsigned int); -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *, unsigned int); -#endif -static int device_inquiry(struct Scsi_Host *, int); -static int read_capacity(struct Scsi_Host *, int); -static int get_pos_info(struct Scsi_Host *); -static char *ti_p(int); -static char *ti_l(int); -static char *ibmrate(unsigned int, int); -static int probe_display(int); -static int probe_bus_mode(struct Scsi_Host *); -static int device_exists(struct Scsi_Host *, int, int *, int *); -static int option_setup(char *); -/* local functions needed for proc_info */ -static int ldn_access_load(struct Scsi_Host *, int); -static int ldn_access_total_read_write(struct Scsi_Host *); - -static irqreturn_t interrupt_handler(int irq, void *dev_id) -{ - unsigned int intr_reg; - unsigned int cmd_result; - unsigned int ldn; - unsigned long flags; - Scsi_Cmnd *cmd; - int lastSCSI; - struct device *dev = dev_id; - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - - spin_lock_irqsave(shpnt->host_lock, flags); - - if(!(inb(IM_STAT_REG(shpnt)) & IM_INTR_REQUEST)) { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_NONE; - } - - /* the reset-function already did all the job, even ints got - renabled on the subsystem, so just return */ - if ((reset_status(shpnt) == IM_RESET_NOT_IN_PROGRESS_NO_INT) || (reset_status(shpnt) == IM_RESET_FINISHED_OK_NO_INT)) { - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - - /*must wait for attention reg not busy, then send EOI to subsystem */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - cpu_relax(); - } - - /*get command result and logical device */ - intr_reg = (unsigned char) (inb(IM_INTR_REG(shpnt))); - cmd_result = intr_reg & 0xf0; - ldn = intr_reg & 0x0f; - /* get the last_scsi_command here */ - lastSCSI = last_scsi_command(shpnt)[ldn]; - outb(IM_EOI | ldn, IM_ATTN_REG(shpnt)); - - /*these should never happen (hw fails, or a local programming bug) */ - if (!global_command_error_excuse) { - switch (cmd_result) { - /* Prevent from Ooopsing on error to show the real reason */ - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - printk(KERN_ERR "IBM MCA SCSI: Fatal Subsystem ERROR!\n"); - printk(KERN_ERR " Last cmd=0x%x, ena=%x, len=", lastSCSI, ld(shpnt)[ldn].scb.enable); - if (ld(shpnt)[ldn].cmd) - printk("%ld/%ld,", (long) (scsi_bufflen(ld(shpnt)[ldn].cmd)), (long) (ld(shpnt)[ldn].scb.sys_buf_length)); - else - printk("none,"); - if (ld(shpnt)[ldn].cmd) - printk("Blocksize=%d", ld(shpnt)[ldn].scb.u2.blk.length); - else - printk("Blocksize=none"); - printk(", host=%p, ldn=0x%x\n", shpnt, ldn); - if (ld(shpnt)[ldn].cmd) { - printk(KERN_ERR "Blockcount=%d/%d\n", last_scsi_blockcount(shpnt)[ldn], ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR "Logical block=%lx/%lx\n", last_scsi_logical_block(shpnt)[ldn], ld(shpnt)[ldn].scb.u1.log_blk_adr); - } - printk(KERN_ERR "Reason given: %s\n", (cmd_result == IM_ADAPTER_HW_FAILURE) ? "HARDWARE FAILURE" : (cmd_result == IM_SOFTWARE_SEQUENCING_ERROR) ? "SOFTWARE SEQUENCING ERROR" : (cmd_result == IM_CMD_ERROR) ? "COMMAND ERROR" : "UNKNOWN"); - /* if errors appear, enter this section to give detailed info */ - printk(KERN_ERR "IBM MCA SCSI: Subsystem Error-Status follows:\n"); - printk(KERN_ERR " Command Type................: %x\n", last_scsi_type(shpnt)[ldn]); - printk(KERN_ERR " Attention Register..........: %x\n", inb(IM_ATTN_REG(shpnt))); - printk(KERN_ERR " Basic Control Register......: %x\n", inb(IM_CTR_REG(shpnt))); - printk(KERN_ERR " Interrupt Status Register...: %x\n", intr_reg); - printk(KERN_ERR " Basic Status Register.......: %x\n", inb(IM_STAT_REG(shpnt))); - if ((last_scsi_type(shpnt)[ldn] == IM_SCB) || (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB)) { - printk(KERN_ERR " SCB-Command.................: %x\n", ld(shpnt)[ldn].scb.command); - printk(KERN_ERR " SCB-Enable..................: %x\n", ld(shpnt)[ldn].scb.enable); - printk(KERN_ERR " SCB-logical block address...: %lx\n", ld(shpnt)[ldn].scb.u1.log_blk_adr); - printk(KERN_ERR " SCB-system buffer address...: %lx\n", ld(shpnt)[ldn].scb.sys_buf_adr); - printk(KERN_ERR " SCB-system buffer length....: %lx\n", ld(shpnt)[ldn].scb.sys_buf_length); - printk(KERN_ERR " SCB-tsb address.............: %lx\n", ld(shpnt)[ldn].scb.tsb_adr); - printk(KERN_ERR " SCB-Chain address...........: %lx\n", ld(shpnt)[ldn].scb.scb_chain_adr); - printk(KERN_ERR " SCB-block count.............: %x\n", ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR " SCB-block length............: %x\n", ld(shpnt)[ldn].scb.u2.blk.length); - } - printk(KERN_ERR " Send this report to the maintainer.\n"); - panic("IBM MCA SCSI: Fatal error message from the subsystem (0x%X,0x%X)!\n", lastSCSI, cmd_result); - break; - } - } else { - /* The command error handling is made silent, but we tell the - * calling function, that there is a reported error from the - * adapter. */ - switch (cmd_result) { - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - global_command_error_excuse = CMD_FAIL; - break; - default: - global_command_error_excuse = 0; - break; - } - } - /* if no panic appeared, increase the interrupt-counter */ - IBM_DS(shpnt).total_interrupts++; - /*only for local checking phase */ - if (local_checking_phase_flag(shpnt)) { - stat_result(shpnt) = cmd_result; - got_interrupt(shpnt) = 1; - reset_status(shpnt) = IM_RESET_FINISHED_OK; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - /* handling of commands coming from upper level of scsi driver */ - if (last_scsi_type(shpnt)[ldn] == IM_IMM_CMD) { - /* verify ldn, and may handle rare reset immediate command */ - if ((reset_status(shpnt) == IM_RESET_IN_PROGRESS) && (last_scsi_command(shpnt)[ldn] == IM_RESET_IMM_CMD)) { - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - } else { - /*reset disk led counter, turn off disk led */ - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - } - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else if (last_scsi_command(shpnt)[ldn] == IM_ABORT_IMM_CMD) { - /* react on SCSI abort command */ -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Interrupt from SCSI-abort.\n"); -#endif - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) - cmd->result = DID_NO_CONNECT << 16; - else - cmd->result = DID_ABORT << 16; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); /* should be the internal_done */ - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - } - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_TIMEOUT - if (cmd) { - if ((cmd->target == TIMEOUT_PUN) && (cmd->device->lun == TIMEOUT_LUN)) { - spin_unlock_irqsave(shpnt->host_lock, flags); - printk("IBM MCA SCSI: Ignoring interrupt from pun=%x, lun=%x.\n", cmd->target, cmd->device->lun); - return IRQ_HANDLED; - } - } -#endif - /*if no command structure, just return, else clear cmd */ - if (!cmd) - { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - -#ifdef IM_DEBUG_INT - printk("cmd=%02x ireg=%02x ds=%02x cs=%02x de=%02x ce=%02x\n", cmd->cmnd[0], intr_reg, ld(shpnt)[ldn].tsb.dev_status, ld(shpnt)[ldn].tsb.cmd_status, ld(shpnt)[ldn].tsb.dev_error, ld(shpnt)[ldn].tsb.cmd_error); -#endif - /*if this is end of media read/write, may turn off PS/2 disk led */ - if ((ld(shpnt)[ldn].device_type != TYPE_NO_LUN) && (ld(shpnt)[ldn].device_type != TYPE_NO_DEVICE)) { - /* only access this, if there was a valid device addressed */ - if (--disk_rw_in_progress == 0) - PS2_DISK_LED_OFF(); - } - - /* IBM describes the status-mask to be 0x1e, but this is not conform - * with SCSI-definition, I suppose, the reason for it is that IBM - * adapters do not support CMD_TERMINATED, TASK_SET_FULL and - * ACA_ACTIVE as returning statusbyte information. (ML) */ - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - cmd->result = (unsigned char) (ld(shpnt)[ldn].tsb.dev_status & 0x1e); - IBM_DS(shpnt).total_errors++; - } else - cmd->result = 0; - /* write device status into cmd->result, and call done function */ - if (lastSCSI == NO_SCSI) { /* unexpected interrupt :-( */ - cmd->result |= DID_BAD_INTR << 16; - printk("IBM MCA SCSI: WARNING - Interrupt from non-pending SCSI-command!\n"); - } else /* things went right :-) */ - cmd->result |= DID_OK << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; -} - -static void issue_cmd(struct Scsi_Host *shpnt, unsigned long cmd_reg, - unsigned char attn_reg) -{ - unsigned long flags; - /* must wait for attention reg not busy */ - while (1) { - spin_lock_irqsave(shpnt->host_lock, flags); - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irqrestore(shpnt->host_lock, flags); - } - /* write registers and enable system interrupts */ - outl(cmd_reg, IM_CMD_REG(shpnt)); - outb(attn_reg, IM_ATTN_REG(shpnt)); - spin_unlock_irqrestore(shpnt->host_lock, flags); -} - -static void internal_done(Scsi_Cmnd * cmd) -{ - cmd->SCp.Status++; - return; -} - -/* SCSI-SCB-command for device_inquiry */ -static int device_inquiry(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; /* prepare statusblock */ - for (retr = 0; retr < 3; retr++) { - /* fill scb with inquiry command */ - scb->command = IM_DEVICE_INQUIRY_CMD | IM_NO_DISCONNECT; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_DEVICE_INQUIRY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 255; /* maximum bufferlength gives max info */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /* issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int read_capacity(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with read capacity command */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_READ_CAPACITY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 8; - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if got capacity, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int get_pos_info(struct Scsi_Host *shpnt) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[MAX_LOG_DEV].scb); - tsb = &(ld(shpnt)[MAX_LOG_DEV].tsb); - buf = (unsigned char *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - ld(shpnt)[MAX_LOG_DEV].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with get_pos_info command */ - scb->command = IM_GET_POS_INFO_CMD; - scb->enable = IM_READ_CONTROL | IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_GET_POS_INFO_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - if (special(shpnt) == IBM_SCSI2_FW) - scb->sys_buf_length = 256; /* get all info from F/W adapter */ - else - scb->sys_buf_length = 18; /* get exactly 18 bytes for other SCSI */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to ldn=15, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - - /*if got POS-stuff, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /* if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -/* SCSI-immediate-command for assign. This functions maps/unmaps specific - ldn-numbers on SCSI (PUN,LUN). It is needed for presetting of the - subsystem and for dynamical remapping od ldns. */ -static int immediate_assign(struct Scsi_Host *shpnt, unsigned int pun, - unsigned int lun, unsigned int ldn, - unsigned int operation) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - switch (special(shpnt)) { - case IBM_SCSI2_FW: - imm_cmd = (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20) | ((pun & 8) << 24); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - default: - imm_cmd = inl(IM_CMD_REG(shpnt)); - imm_cmd &= (unsigned long) (0xF8000000); /* keep reserved bits */ - imm_cmd |= (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - } - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_ASSIGN_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -static int immediate_feature(struct Scsi_Host *shpnt, unsigned int speed, unsigned int timeout) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - imm_cmd = IM_FEATURE_CTR_IMM_CMD; - imm_cmd |= (unsigned long) ((speed & 0x7) << 29); - imm_cmd |= (unsigned long) ((timeout & 0x1fff) << 16); - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_FEATURE_CTR_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - /* we need to run into command errors in order to probe for the - * right speed! */ - global_command_error_excuse = 1; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - if (global_command_error_excuse == CMD_FAIL) { - global_command_error_excuse = 0; - return 2; - } else - global_command_error_excuse = 0; - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *shpnt, unsigned int ldn) -{ - int retries; - int ticks; - unsigned long imm_command; - - for (retries = 0; retries < 3; retries++) { - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xFFFF0000); /* keep reserved bits */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - last_scsi_command(shpnt)[ldn] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - issue_cmd(shpnt, (unsigned long) (imm_command), IM_IMM_CMD | ldn); - ticks = IM_RESET_DELAY * HZ; - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just complain */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - /* did not work, finish */ - return 1; - } - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retries >= 3) - return 0; - else - return 1; -} -#endif - -/* type-interpreter for physical device numbers */ -static char *ti_p(int dev) -{ - switch (dev) { - case TYPE_IBM_SCSI_ADAPTER: - return ("A"); - case TYPE_DISK: - return ("D"); - case TYPE_TAPE: - return ("T"); - case TYPE_PROCESSOR: - return ("P"); - case TYPE_WORM: - return ("W"); - case TYPE_ROM: - return ("R"); - case TYPE_SCANNER: - return ("S"); - case TYPE_MOD: - return ("M"); - case TYPE_MEDIUM_CHANGER: - return ("C"); - case TYPE_NO_LUN: - return ("+"); /* show NO_LUN */ - } - return ("-"); /* TYPE_NO_DEVICE and others */ -} - -/* interpreter for logical device numbers (ldn) */ -static char *ti_l(int val) -{ - const char hex[16] = "0123456789abcdef"; - static char answer[2]; - - answer[1] = (char) (0x0); - if (val <= MAX_LOG_DEV) - answer[0] = hex[val]; - else - answer[0] = '-'; - return (char *) &answer; -} - -/* transfers bitpattern of the feature command to values in MHz */ -static char *ibmrate(unsigned int speed, int i) -{ - switch (speed) { - case 0: - return i ? "5.00" : "10.00"; - case 1: - return i ? "4.00" : "8.00"; - case 2: - return i ? "3.33" : "6.66"; - case 3: - return i ? "2.86" : "5.00"; - case 4: - return i ? "2.50" : "4.00"; - case 5: - return i ? "2.22" : "3.10"; - case 6: - return i ? "2.00" : "2.50"; - case 7: - return i ? "1.82" : "2.00"; - } - return "---"; -} - -static int probe_display(int what) -{ - static int rotator = 0; - const char rotor[] = "|/-\\"; - - if (!(display_mode & LED_DISP)) - return 0; - if (!what) { - outl(0x20202020, MOD95_LED_PORT); - outl(0x20202020, MOD95_LED_PORT + 4); - } else { - outb('S', MOD95_LED_PORT + 7); - outb('C', MOD95_LED_PORT + 6); - outb('S', MOD95_LED_PORT + 5); - outb('I', MOD95_LED_PORT + 4); - outb('i', MOD95_LED_PORT + 3); - outb('n', MOD95_LED_PORT + 2); - outb('i', MOD95_LED_PORT + 1); - outb((char) (rotor[rotator]), MOD95_LED_PORT); - rotator++; - if (rotator > 3) - rotator = 0; - } - return 0; -} - -static int probe_bus_mode(struct Scsi_Host *shpnt) -{ - struct im_pos_info *info; - int num_bus = 0; - int ldn; - - info = (struct im_pos_info *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - if (get_pos_info(shpnt)) { - if (info->connector_size & 0xf000) - subsystem_connector_size(shpnt) = 16; - else - subsystem_connector_size(shpnt) = 32; - num_bus |= (info->pos_4b & 8) >> 3; - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - if ((special(shpnt) == IBM_SCSI_WCACHE) || (special(shpnt) == IBM_7568_WCACHE)) { - if (!((info->cache_stat >> ldn) & 1)) - ld(shpnt)[ldn].cache_flag = 0; - } - if (!((info->retry_stat >> ldn) & 1)) - ld(shpnt)[ldn].retry_flag = 0; - } -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: SCSI-Cache bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].cache_flag); - } - printk("\nIBM MCA SCSI: SCSI-Retry bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].retry_flag); - } - printk("\n"); -#endif - } - return num_bus; -} - -/* probing scsi devices */ -static void check_devices(struct Scsi_Host *shpnt, int adaptertype) -{ - int id, lun, ldn, ticks; - int count_devices; /* local counter for connected device */ - int max_pun; - int num_bus; - int speedrun; /* local adapter_speed check variable */ - - /* assign default values to certain variables */ - ticks = 0; - count_devices = 0; - IBM_DS(shpnt).dyn_flag = 0; /* normally no need for dynamical ldn management */ - IBM_DS(shpnt).total_errors = 0; /* set errorcounter to 0 */ - next_ldn(shpnt) = 7; /* next ldn to be assigned is 7, because 0-6 is 'hardwired' */ - - /* initialize the very important driver-informational arrays/structs */ - memset(ld(shpnt), 0, sizeof(ld(shpnt))); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - last_scsi_command(shpnt)[ldn] = NO_SCSI; /* emptify last SCSI-command storage */ - last_scsi_type(shpnt)[ldn] = 0; - ld(shpnt)[ldn].cache_flag = 1; - ld(shpnt)[ldn].retry_flag = 1; - } - memset(get_ldn(shpnt), TYPE_NO_DEVICE, sizeof(get_ldn(shpnt))); /* this is essential ! */ - memset(get_scsi(shpnt), TYPE_NO_DEVICE, sizeof(get_scsi(shpnt))); /* this is essential ! */ - for (lun = 0; lun < 8; lun++) { - /* mark the adapter at its pun on all luns */ - get_scsi(shpnt)[subsystem_pun(shpnt)][lun] = TYPE_IBM_SCSI_ADAPTER; - get_ldn(shpnt)[subsystem_pun(shpnt)][lun] = MAX_LOG_DEV; /* make sure, the subsystem - ldn is active for all - luns. */ - } - probe_display(0); /* Supercool display usage during SCSI-probing. */ - /* This makes sense, when booting without any */ - /* monitor connected on model XX95. */ - - /* STEP 1: */ - adapter_speed(shpnt) = global_adapter_speed; - speedrun = adapter_speed(shpnt); - while (immediate_feature(shpnt, speedrun, adapter_timeout) == 2) { - probe_display(1); - if (speedrun == 7) - panic("IBM MCA SCSI: Cannot set Synchronous-Transfer-Rate!\n"); - speedrun++; - if (speedrun > 7) - speedrun = 7; - } - adapter_speed(shpnt) = speedrun; - /* Get detailed information about the current adapter, necessary for - * device operations: */ - num_bus = probe_bus_mode(shpnt); - - /* num_bus contains only valid data for the F/W adapter! */ - if (adaptertype == IBM_SCSI2_FW) { /* F/W SCSI adapter: */ - /* F/W adapter PUN-space extension evaluation: */ - if (num_bus) { - printk(KERN_INFO "IBM MCA SCSI: Separate bus mode (wide-addressing enabled)\n"); - subsystem_maxid(shpnt) = 16; - } else { - printk(KERN_INFO "IBM MCA SCSI: Combined bus mode (wide-addressing disabled)\n"); - subsystem_maxid(shpnt) = 8; - } - printk(KERN_INFO "IBM MCA SCSI: Sync.-Rate (F/W: 20, Int.: 10, Ext.: %s) MBytes/s\n", ibmrate(speedrun, adaptertype)); - } else /* all other IBM SCSI adapters: */ - printk(KERN_INFO "IBM MCA SCSI: Synchronous-SCSI-Transfer-Rate: %s MBytes/s\n", ibmrate(speedrun, adaptertype)); - - /* assign correct PUN device space */ - max_pun = subsystem_maxid(shpnt); - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Current SCSI-host index: %d\n", shpnt); - printk("IBM MCA SCSI: Removing default logical SCSI-device mapping."); -#else - printk(KERN_INFO "IBM MCA SCSI: Dev. Order: %s, Mapping (takes <2min): ", (ibm_ansi_order) ? "ANSI" : "New"); -#endif - for (ldn = 0; ldn < MAX_LOG_DEV; ldn++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); /* remove ldn (wherever) */ - } - lun = 0; /* default lun is 0 */ -#ifndef IM_DEBUG_PROBE - printk("cleared,"); -#endif - /* STEP 2: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Scanning SCSI-devices."); -#endif - for (id = 0; id < max_pun; id++) -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - /* if pun is not the adapter: */ - /* set ldn=0 to pun,lun */ - immediate_assign(shpnt, id, lun, PROBE_LDN, SET_LDN); - if (device_inquiry(shpnt, PROBE_LDN)) { /* probe device */ - get_scsi(shpnt)[id][lun] = (unsigned char) (ld(shpnt)[PROBE_LDN].buf[0]); - /* entry, even for NO_LUN */ - if (ld(shpnt)[PROBE_LDN].buf[0] != TYPE_NO_LUN) - count_devices++; /* a existing device is found */ - } - /* remove ldn */ - immediate_assign(shpnt, id, lun, PROBE_LDN, REMOVE_LDN); - } - } -#ifndef IM_DEBUG_PROBE - printk("scanned,"); -#endif - /* STEP 3: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Mapping SCSI-devices."); -#endif - ldn = 0; - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8 && ldn < MAX_LOG_DEV; lun++) -#endif - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - if (get_scsi(shpnt)[id][lun] != TYPE_NO_LUN && get_scsi(shpnt)[id][lun] != TYPE_NO_DEVICE) { - /* Only map if accepted type. Always enter for - lun == 0 to get no gaps into ldn-mapping for ldn<7. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET - printk("resetting device at ldn=%x ... ", ldn); - immediate_reset(shpnt, ldn); -#endif - ldn++; - } else { - /* device vanished, probably because we don't know how to - * handle it or because it has problems */ - if (lun > 0) { - /* remove mapping */ - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); - } else - ldn++; - } - } else if (lun == 0) { - /* map lun == 0, even if no device exists */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - ldn++; - } - } - } - /* STEP 4: */ - - /* map remaining ldns to non-existing devices */ - for (lun = 1; lun < 8 && ldn < MAX_LOG_DEV; lun++) - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - if (get_scsi(shpnt)[id][lun] == TYPE_NO_LUN || get_scsi(shpnt)[id][lun] == TYPE_NO_DEVICE) { - probe_display(1); - /* Map remaining ldns only to NON-existing pun,lun - combinations to make sure an inquiry will fail. - For MULTI_LUN, it is needed to avoid adapter autonome - SCSI-remapping. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; - ldn++; - } - } -#ifndef IM_DEBUG_PROBE - printk("mapped."); -#endif - printk("\n"); -#ifdef IM_DEBUG_PROBE - if (ibm_ansi_order) - printk("IBM MCA SCSI: Device order: IBM/ANSI (pun=7 is first).\n"); - else - printk("IBM MCA SCSI: Device order: New Industry Standard (pun=0 is first).\n"); -#endif - -#ifdef IM_DEBUG_PROBE - /* Show the physical and logical mapping during boot. */ - printk("IBM MCA SCSI: Determined SCSI-device-mapping:\n"); - printk(" Physical SCSI-Device Map Logical SCSI-Device Map\n"); - printk("ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - printk("%2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_p(get_scsi(shpnt)[id][lun])); - printk(" %2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_l(get_ldn(shpnt)[id][lun])); - printk("\n"); - } -#endif - - /* assign total number of found SCSI-devices to the statistics struct */ - IBM_DS(shpnt).total_scsi_devices = count_devices; - - /* decide for output in /proc-filesystem, if the configuration of - SCSI-devices makes dynamical reassignment of devices necessary */ - if (count_devices >= MAX_LOG_DEV) - IBM_DS(shpnt).dyn_flag = 1; /* dynamical assignment is necessary */ - else - IBM_DS(shpnt).dyn_flag = 0; /* dynamical assignment is not necessary */ - - /* If no SCSI-devices are assigned, return 1 in order to cause message. */ - if (ldn == 0) - printk("IBM MCA SCSI: Warning: No SCSI-devices found/assigned!\n"); - - /* reset the counters for statistics on the current adapter */ - IBM_DS(shpnt).scbs = 0; - IBM_DS(shpnt).long_scbs = 0; - IBM_DS(shpnt).total_accesses = 0; - IBM_DS(shpnt).total_interrupts = 0; - IBM_DS(shpnt).dynamical_assignments = 0; - memset(IBM_DS(shpnt).ldn_access, 0x0, sizeof(IBM_DS(shpnt).ldn_access)); - memset(IBM_DS(shpnt).ldn_read_access, 0x0, sizeof(IBM_DS(shpnt).ldn_read_access)); - memset(IBM_DS(shpnt).ldn_write_access, 0x0, sizeof(IBM_DS(shpnt).ldn_write_access)); - memset(IBM_DS(shpnt).ldn_inquiry_access, 0x0, sizeof(IBM_DS(shpnt).ldn_inquiry_access)); - memset(IBM_DS(shpnt).ldn_modeselect_access, 0x0, sizeof(IBM_DS(shpnt).ldn_modeselect_access)); - memset(IBM_DS(shpnt).ldn_assignments, 0x0, sizeof(IBM_DS(shpnt).ldn_assignments)); - probe_display(0); - return; -} - -static int device_exists(struct Scsi_Host *shpnt, int ldn, int *block_length, int *device_type) -{ - unsigned char *buf; - /* if no valid device found, return immediately with 0 */ - if (!(device_inquiry(shpnt, ldn))) - return 0; - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - if (*buf == TYPE_ROM) { - *device_type = TYPE_ROM; - *block_length = 2048; /* (standard blocksize for yellow-/red-book) */ - return 1; - } - if (*buf == TYPE_WORM) { - *device_type = TYPE_WORM; - *block_length = 2048; - return 1; - } - if (*buf == TYPE_DISK) { - *device_type = TYPE_DISK; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_MOD) { - *device_type = TYPE_MOD; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_TAPE) { - *device_type = TYPE_TAPE; - *block_length = 0; /* not in use (setting by mt and mtst in op.) */ - return 1; - } - if (*buf == TYPE_PROCESSOR) { - *device_type = TYPE_PROCESSOR; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_SCANNER) { - *device_type = TYPE_SCANNER; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_MEDIUM_CHANGER) { - *device_type = TYPE_MEDIUM_CHANGER; - *block_length = 0; /* One never knows, what to expect on a medium - changer device. */ - return 1; - } - return 0; -} - -static void internal_ibmmca_scsi_setup(char *str, int *ints) -{ - int i, j, io_base, id_base; - char *token; - - io_base = 0; - id_base = 0; - if (str) { - j = 0; - while ((token = strsep(&str, ",")) != NULL) { - if (!strcmp(token, "activity")) - display_mode |= LED_ACTIVITY; - if (!strcmp(token, "display")) - display_mode |= LED_DISP; - if (!strcmp(token, "adisplay")) - display_mode |= LED_ADISP; - if (!strcmp(token, "normal")) - ibm_ansi_order = 0; - if (!strcmp(token, "ansi")) - ibm_ansi_order = 1; - if (!strcmp(token, "fast")) - global_adapter_speed = 0; - if (!strcmp(token, "medium")) - global_adapter_speed = 4; - if (!strcmp(token, "slow")) - global_adapter_speed = 7; - if ((*token == '-') || (isdigit(*token))) { - if (!(j % 2) && (io_base < IM_MAX_HOSTS)) - io_port[io_base++] = simple_strtoul(token, NULL, 0); - if ((j % 2) && (id_base < IM_MAX_HOSTS)) - scsi_id[id_base++] = simple_strtoul(token, NULL, 0); - j++; - } - } - } else if (ints) { - for (i = 0; i < IM_MAX_HOSTS && 2 * i + 2 < ints[0]; i++) { - io_port[i] = ints[2 * i + 2]; - scsi_id[i] = ints[2 * i + 2]; - } - } - return; -} - -#if 0 - FIXME NEED TO MOVE TO SYSFS - -static int ibmmca_getinfo(char *buf, int slot, void *dev_id) -{ - struct Scsi_Host *shpnt; - int len, speciale, connectore, k; - unsigned int pos[8]; - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - spin_lock_irqsave(dev->host_lock, flags); - - shpnt = dev; /* assign host-structure to local pointer */ - len = 0; /* set filled text-buffer index to 0 */ - /* get the _special contents of the hostdata structure */ - speciale = ((struct ibmmca_hostdata *) shpnt->hostdata)->_special; - connectore = ((struct ibmmca_hostdata *) shpnt->hostdata)->_connector_size; - for (k = 2; k < 4; k++) - pos[k] = ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k]; - if (speciale == FORCED_DETECTION) { /* forced detection */ - len += sprintf(buf + len, - "Adapter category: forced detected\n" "***************************************\n" "*** Forced detected SCSI Adapter ***\n" "*** No chip-information available ***\n" "***************************************\n"); - } else if (speciale == INTEGRATED_SCSI) { - /* if the integrated subsystem has been found automatically: */ - len += sprintf(buf + len, - "Adapter category: integrated\n" "Chip revision level: %d\n" "Chip status: %s\n" "8 kByte NVRAM status: %s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 1) ? "enabled" : "disabled", (pos[2] & 2) ? "locked" : "accessible"); - } else if ((speciale >= 0) && (speciale < ARRAY_SIZE(subsys_list))) { - /* if the subsystem is a slot adapter */ - len += sprintf(buf + len, "Adapter category: slot-card\n" "ROM Segment Address: "); - if ((pos[2] & 0xf0) == 0xf0) - len += sprintf(buf + len, "off\n"); - else - len += sprintf(buf + len, "0x%x\n", ((pos[2] & 0xf0) << 13) + 0xc0000); - len += sprintf(buf + len, "Chip status: %s\n", (pos[2] & 1) ? "enabled" : "disabled"); - len += sprintf(buf + len, "Adapter I/O Offset: 0x%x\n", ((pos[2] & 0x0e) << 2)); - } else { - len += sprintf(buf + len, "Adapter category: unknown\n"); - } - /* common subsystem information to write to the slotn file */ - len += sprintf(buf + len, "Subsystem PUN: %d\n", shpnt->this_id); - len += sprintf(buf + len, "I/O base address range: 0x%x-0x%x\n", (unsigned int) (shpnt->io_port), (unsigned int) (shpnt->io_port + 7)); - len += sprintf(buf + len, "MCA-slot size: %d bits", connectore); - /* Now make sure, the bufferlength is devidable by 4 to avoid - * paging problems of the buffer. */ - while (len % sizeof(int) != (sizeof(int) - 1)) - len += sprintf(buf + len, " "); - len += sprintf(buf + len, "\n"); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - - return len; -} -#endif - -static struct scsi_host_template ibmmca_driver_template = { - .proc_name = "ibmmca", - .proc_info = ibmmca_proc_info, - .name = "IBM SCSI-Subsystem", - .queuecommand = ibmmca_queuecommand, - .eh_abort_handler = ibmmca_abort, - .eh_host_reset_handler = ibmmca_host_reset, - .bios_param = ibmmca_biosparam, - .can_queue = 16, - .this_id = 7, - .sg_tablesize = 16, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, -}; - -static int ibmmca_probe(struct device *dev) -{ - struct Scsi_Host *shpnt; - int port, id, i, j, k, irq, enabled, ret = -EINVAL; - struct mca_device *mca_dev = to_mca_device(dev); - const char *description = ibmmca_description[mca_dev->index]; - - /* First of all, print the version number of the driver. This is - * important to allow better user bugreports in case of already - * having problems with the MCA_bus probing. */ - printk(KERN_INFO "IBM MCA SCSI: Version %s\n", IBMMCA_SCSI_DRIVER_VERSION); - /* The POS2-register of all PS/2 model SCSI-subsystems has the following - * interpretation of bits: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 2 : Reserved - * Bit 1 : 8k NVRAM Disabled - * Bit 0 : Chip Enable (EN-Signal) - * The POS3-register is interpreted as follows: - * Bit 7 - 5 : SCSI ID - * Bit 4 : Reserved = 0 - * Bit 3 - 0 : Reserved = 0 - * (taken from "IBM, PS/2 Hardware Interface Technical Reference, Common - * Interfaces (1991)"). - * In short words, this means, that IBM PS/2 machines only support - * 1 single subsystem by default. The slot-adapters must have another - * configuration on pos2. Here, one has to assume the following - * things for POS2-register: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 1 : port offset factor - * Bit 0 : Chip Enable (EN-Signal) - * As I found a patch here, setting the IO-registers to 0x3540 forced, - * as there was a 0x05 in POS2 on a model 56, I assume, that the - * port 0x3540 must be fix for integrated SCSI-controllers. - * Ok, this discovery leads to the following implementation: (M.Lang) */ - - /* first look for the IBM SCSI integrated subsystem on the motherboard */ - for (j = 0; j < 8; j++) /* read the pos-information */ - pos[j] = mca_device_read_pos(mca_dev, j); - id = (pos[3] & 0xe0) >> 5; /* this is correct and represents the PUN */ - enabled = (pos[2] &0x01); - if (!enabled) { - printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n"); - printk(KERN_WARNING " SCSI-operations may not work.\n"); - } - - /* pos2 = pos3 = 0xff if there is no integrated SCSI-subsystem present, but - * if we ignore the settings of all surrounding pos registers, it is not - * completely sufficient to only check pos2 and pos3. */ - /* Therefore, now the following if statement is used to - * make sure, we see a real integrated onboard SCSI-interface and no - * internal system information, which gets mapped to some pos registers - * on models 95xx. */ - if (mca_dev->slot == MCA_INTEGSCSI && - ((!pos[0] && !pos[1] && pos[2] > 0 && - pos[3] > 0 && !pos[4] && !pos[5] && - !pos[6] && !pos[7]) || - (pos[0] == 0xff && pos[1] == 0xff && - pos[2] < 0xff && pos[3] < 0xff && - pos[4] == 0xff && pos[5] == 0xff && - pos[6] == 0xff && pos[7] == 0xff))) { - irq = IM_IRQ; - port = IM_IO_PORT; - } else { - irq = IM_IRQ; - port = IM_IO_PORT + ((pos[2] &0x0e) << 2); - if ((mca_dev->index == IBM_SCSI2_FW) && (pos[6] != 0)) { - printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n"); - printk(KERN_ERR " Impossible to determine adapter PUN!\n"); - printk(KERN_ERR " Guessing adapter PUN = 7.\n"); - id = 7; - } else { - id = (pos[3] & 0xe0) >> 5; /* get subsystem PUN */ - if (mca_dev->index == IBM_SCSI2_FW) { - id |= (pos[3] & 0x10) >> 1; /* get subsystem PUN high-bit - * for F/W adapters */ - } - } - if ((mca_dev->index == IBM_SCSI2_FW) && - (pos[4] & 0x01) && (pos[6] == 0)) { - /* IRQ11 is used by SCSI-2 F/W Adapter/A */ - printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n"); - irq = IM_IRQ_FW; - } - } - - - - /* give detailed information on the subsystem. This helps me - * additionally during debugging and analyzing bug-reports. */ - printk(KERN_INFO "IBM MCA SCSI: %s found, io=0x%x, scsi id=%d,\n", - description, port, id); - if (mca_dev->slot == MCA_INTEGSCSI) - printk(KERN_INFO " chip rev.=%d, 8K NVRAM=%s, subsystem=%s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 2) ? "locked" : "accessible", (pos[2] & 1) ? "enabled." : "disabled."); - else { - if ((pos[2] & 0xf0) == 0xf0) - printk(KERN_DEBUG " ROM Addr.=off,"); - else - printk(KERN_DEBUG " ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000); - - printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled."); - } - - /* check I/O region */ - if (!request_region(port, IM_N_IO_PORT, description)) { - printk(KERN_ERR "IBM MCA SCSI: Unable to get I/O region 0x%x-0x%x (%d ports).\n", port, port + IM_N_IO_PORT - 1, IM_N_IO_PORT); - goto out_fail; - } - - /* register host */ - shpnt = scsi_host_alloc(&ibmmca_driver_template, - sizeof(struct ibmmca_hostdata)); - if (!shpnt) { - printk(KERN_ERR "IBM MCA SCSI: Unable to register host.\n"); - goto out_release; - } - - dev_set_drvdata(dev, shpnt); - if(request_irq(irq, interrupt_handler, IRQF_SHARED, description, dev)) { - printk(KERN_ERR "IBM MCA SCSI: failed to request interrupt %d\n", irq); - goto out_free_host; - } - - /* request I/O region */ - special(shpnt) = mca_dev->index; /* important assignment or else crash! */ - subsystem_connector_size(shpnt) = 0; /* preset slot-size */ - shpnt->irq = irq; /* assign necessary stuff for the adapter */ - shpnt->io_port = port; - shpnt->n_io_port = IM_N_IO_PORT; - shpnt->this_id = id; - shpnt->max_id = 8; /* 8 PUNs are default */ - /* now, the SCSI-subsystem is connected to Linux */ - -#ifdef IM_DEBUG_PROBE - ctrl = (unsigned int) (inb(IM_CTR_REG(found))); /* get control-register status */ - printk("IBM MCA SCSI: Control Register contents: %x, status: %x\n", ctrl, inb(IM_STAT_REG(found))); - printk("IBM MCA SCSI: This adapters' POS-registers: "); - for (i = 0; i < 8; i++) - printk("%x ", pos[i]); - printk("\n"); -#endif - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - - for (i = 0; i < 16; i++) /* reset the tables */ - for (j = 0; j < 8; j++) - get_ldn(shpnt)[i][j] = MAX_LOG_DEV; - - /* check which logical devices exist */ - /* after this line, local interrupting is possible: */ - local_checking_phase_flag(shpnt) = 1; - check_devices(shpnt, mca_dev->index); /* call by value, using the global variable hosts */ - local_checking_phase_flag(shpnt) = 0; - - /* an ibm mca subsystem has been detected */ - - for (k = 2; k < 7; k++) - ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k]; - ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = INTEGRATED_SCSI; - mca_device_set_name(mca_dev, description); - /* FIXME: NEED TO REPLUMB TO SYSFS - mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt); - */ - mca_device_set_claim(mca_dev, 1); - if (scsi_add_host(shpnt, dev)) { - dev_printk(KERN_ERR, dev, "IBM MCA SCSI: scsi_add_host failed\n"); - goto out_free_host; - } - scsi_scan_host(shpnt); - - return 0; - out_free_host: - scsi_host_put(shpnt); - out_release: - release_region(port, IM_N_IO_PORT); - out_fail: - return ret; -} - -static int __devexit ibmmca_remove(struct device *dev) -{ - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - scsi_remove_host(shpnt); - release_region(shpnt->io_port, shpnt->n_io_port); - free_irq(shpnt->irq, dev); - scsi_host_put(shpnt); - return 0; -} - -/* The following routine is the SCSI command queue for the midlevel driver */ -static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) -{ - unsigned int ldn; - unsigned int scsi_cmd; - struct im_scb *scb; - struct Scsi_Host *shpnt; - int current_ldn; - int id, lun; - int target; - int max_pun; - int i; - struct scatterlist *sg; - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* if (target,lun) is NO LUN or not existing at all, return error */ - if ((get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_LUN) || (get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_DEVICE)) { - cmd->result = DID_NO_CONNECT << 16; - if (done) - done(cmd); - return 0; - } - - /*if (target,lun) unassigned, do further checks... */ - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - if (ldn >= MAX_LOG_DEV) { /* on invalid ldn do special stuff */ - if (ldn > MAX_LOG_DEV) { /* dynamical remapping if ldn unassigned */ - current_ldn = next_ldn(shpnt); /* stop-value for one circle */ - while (ld(shpnt)[next_ldn(shpnt)].cmd) { /* search for a occupied, but not in */ - /* command-processing ldn. */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - if (current_ldn == next_ldn(shpnt)) { /* One circle done ? */ - /* no non-processing ldn found */ - scmd_printk(KERN_WARNING, cmd, - "IBM MCA SCSI: Cannot assign SCSI-device dynamically!\n" - " On ldn 7-14 SCSI-commands everywhere in progress.\n" - " Reporting DID_NO_CONNECT for device.\n"); - cmd->result = DID_NO_CONNECT << 16; /* return no connect */ - if (done) - done(cmd); - return 0; - } - } - - /* unmap non-processing ldn */ - for (id = 0; id < max_pun; id++) - for (lun = 0; lun < 8; lun++) { - if (get_ldn(shpnt)[id][lun] == next_ldn(shpnt)) { - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - get_scsi(shpnt)[id][lun] = TYPE_NO_DEVICE; - /* unmap entry */ - } - } - /* set reduced interrupt_handler-mode for checking */ - local_checking_phase_flag(shpnt) = 1; - /* map found ldn to pun,lun */ - get_ldn(shpnt)[target][cmd->device->lun] = next_ldn(shpnt); - /* change ldn to the right value, that is now next_ldn */ - ldn = next_ldn(shpnt); - /* unassign all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* set only LDN for remapped device */ - immediate_assign(shpnt, target, cmd->device->lun, ldn, SET_LDN); - /* get device information for ld[ldn] */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { - ld(shpnt)[ldn].cmd = NULL; /* To prevent panic set 0, because - devices that were not assigned, - should have nothing in progress. */ - get_scsi(shpnt)[target][cmd->device->lun] = ld(shpnt)[ldn].device_type; - /* increase assignment counters for statistics in /proc */ - IBM_DS(shpnt).dynamical_assignments++; - IBM_DS(shpnt).ldn_assignments[ldn]++; - } else - /* panic here, because a device, found at boottime has - vanished */ - panic("IBM MCA SCSI: ldn=0x%x, SCSI-device on (%d,%d) vanished!\n", ldn, target, cmd->device->lun); - /* unassign again all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* remap all ldns, as written in the pun/lun table */ - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - for (id = 0; id < max_pun; id++) { - if (get_ldn(shpnt)[id][lun] <= MAX_LOG_DEV) - immediate_assign(shpnt, id, lun, get_ldn(shpnt)[id][lun], SET_LDN); - } - /* set back to normal interrupt_handling */ - local_checking_phase_flag(shpnt) = 0; -#ifdef IM_DEBUG_PROBE - /* Information on syslog terminal */ - printk("IBM MCA SCSI: ldn=0x%x dynamically reassigned to (%d,%d).\n", ldn, target, cmd->device->lun); -#endif - /* increase next_ldn for next dynamical assignment */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - } else { /* wall against Linux accesses to the subsystem adapter */ - cmd->result = DID_BAD_TARGET << 16; - if (done) - done(cmd); - return 0; - } - } - - /*verify there is no command already in progress for this log dev */ - if (ld(shpnt)[ldn].cmd) - panic("IBM MCA SCSI: cmd already in progress for this ldn.\n"); - - /*save done in cmd, and save cmd for the interrupt handler */ - cmd->scsi_done = done; - ld(shpnt)[ldn].cmd = cmd; - - /*fill scb information independent of the scsi command */ - scb = &(ld(shpnt)[ldn].scb); - ld(shpnt)[ldn].tsb.dev_status = 0; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE; - scb->tsb_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].tsb)); - scsi_cmd = cmd->cmnd[0]; - - if (scsi_sg_count(cmd)) { - BUG_ON(scsi_sg_count(cmd) > 16); - - scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) { - ld(shpnt)[ldn].sge[i].address = (void *) (isa_page_to_bus(sg_page(sg)) + sg->offset); - ld(shpnt)[ldn].sge[i].byte_length = sg->length; - } - scb->enable |= IM_POINTER_TO_LIST; - scb->sys_buf_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].sge[0])); - scb->sys_buf_length = scsi_sg_count(cmd) * sizeof(struct im_sge); - } else { - scb->sys_buf_adr = isa_virt_to_bus(scsi_sglist(cmd)); - /* recent Linux midlevel SCSI places 1024 byte for inquiry - * command. Far too much for old PS/2 hardware. */ - switch (scsi_cmd) { - /* avoid command errors by setting bufferlengths to - * ANSI-standard. Beware of forcing it to 255, - * this could SEGV the kernel!!! */ - case INQUIRY: - case REQUEST_SENSE: - case MODE_SENSE: - case MODE_SELECT: - if (scsi_bufflen(cmd) > 255) - scb->sys_buf_length = 255; - else - scb->sys_buf_length = scsi_bufflen(cmd); - break; - case TEST_UNIT_READY: - scb->sys_buf_length = 0; - break; - default: - scb->sys_buf_length = scsi_bufflen(cmd); - break; - } - } - /*fill scb information dependent on scsi command */ - -#ifdef IM_DEBUG_CMD - printk("issue scsi cmd=%02x to ldn=%d\n", scsi_cmd, ldn); -#endif - - /* for specific device-type debugging: */ -#ifdef IM_DEBUG_CMD_SPEC_DEV - if (ld(shpnt)[ldn].device_type == IM_DEBUG_CMD_DEVICE) - printk("(SCSI-device-type=0x%x) issue scsi cmd=%02x to ldn=%d\n", ld(shpnt)[ldn].device_type, scsi_cmd, ldn); -#endif - - /* for possible panics store current command */ - last_scsi_command(shpnt)[ldn] = scsi_cmd; - last_scsi_type(shpnt)[ldn] = IM_SCB; - /* update statistical info */ - IBM_DS(shpnt).total_accesses++; - IBM_DS(shpnt).ldn_access[ldn]++; - - switch (scsi_cmd) { - case READ_6: - case WRITE_6: - case READ_10: - case WRITE_10: - case READ_12: - case WRITE_12: - /* Distinguish between disk and other devices. Only disks (that are the - most frequently accessed devices) should be supported by the - IBM-SCSI-Subsystem commands. */ - switch (ld(shpnt)[ldn].device_type) { - case TYPE_DISK: /* for harddisks enter here ... */ - case TYPE_MOD: /* ... try it also for MO-drives (send flames as */ - /* you like, if this won't work.) */ - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) { - /* read command preparations */ - scb->enable |= IM_READ_CONTROL; - IBM_DS(shpnt).ldn_read_access[ldn]++; /* increase READ-access on ldn stat. */ - scb->command = IM_READ_DATA_CMD | IM_NO_DISCONNECT; - } else { /* write command preparations */ - IBM_DS(shpnt).ldn_write_access[ldn]++; /* increase write-count on ldn stat. */ - scb->command = IM_WRITE_DATA_CMD | IM_NO_DISCONNECT; - } - if (scsi_cmd == READ_6 || scsi_cmd == WRITE_6) { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[3]) << 0) | (((unsigned) cmd->cmnd[2]) << 8) | ((((unsigned) cmd->cmnd[1]) & 0x1f) << 16); - scb->u2.blk.count = (unsigned) cmd->cmnd[4]; - } else { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[5]) << 0) | (((unsigned) cmd->cmnd[4]) << 8) | (((unsigned) cmd->cmnd[3]) << 16) | (((unsigned) cmd->cmnd[2]) << 24); - scb->u2.blk.count = (((unsigned) cmd->cmnd[8]) << 0) | (((unsigned) cmd->cmnd[7]) << 8); - } - last_scsi_logical_block(shpnt)[ldn] = scb->u1.log_blk_adr; - last_scsi_blockcount(shpnt)[ldn] = scb->u2.blk.count; - scb->u2.blk.length = ld(shpnt)[ldn].block_length; - break; - /* for other devices, enter here. Other types are not known by - Linux! TYPE_NO_LUN is forbidden as valid device. */ - case TYPE_ROM: - case TYPE_TAPE: - case TYPE_PROCESSOR: - case TYPE_WORM: - case TYPE_SCANNER: - case TYPE_MEDIUM_CHANGER: - /* If there is a sequential-device, IBM recommends to use - IM_OTHER_SCSI_CMD_CMD instead of subsystem READ/WRITE. - This includes CD-ROM devices, too, due to the partial sequential - read capabilities. */ - scb->command = IM_OTHER_SCSI_CMD_CMD; - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) - /* enable READ */ - scb->enable |= IM_READ_CONTROL; - scb->enable |= IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - /* Read/write on this non-disk devices is also displayworthy, - so flash-up the LED/display. */ - break; - } - break; - case INQUIRY: - IBM_DS(shpnt).ldn_inquiry_access[ldn]++; - scb->command = IM_DEVICE_INQUIRY_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - break; - case TEST_UNIT_READY: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - scb->u1.scsi_cmd_length = 6; - memcpy(scb->u2.scsi_command, cmd->cmnd, 6); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - case READ_CAPACITY: - /* the length of system memory buffer must be exactly 8 bytes */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable |= IM_READ_CONTROL | IM_BYPASS_BUFFER; - if (scb->sys_buf_length > 8) - scb->sys_buf_length = 8; - break; - /* Commands that need read-only-mode (system <- device): */ - case REQUEST_SENSE: - scb->command = IM_REQUEST_SENSE_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - break; - /* Commands that need write-only-mode (system -> device): */ - case MODE_SELECT: - case MODE_SELECT_10: - IBM_DS(shpnt).ldn_modeselect_access[ldn]++; - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; /*Select needs WRITE-enabled */ - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - /* For other commands, read-only is useful. Most other commands are - running without an input-data-block. */ - default: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - } - /*issue scb command, and return */ - if (++disk_rw_in_progress == 1) - PS2_DISK_LED_ON(shpnt->host_no, target); - - if (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB) { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_LONG_SCB | ldn); - IBM_DS(shpnt).long_scbs++; - } else { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - IBM_DS(shpnt).scbs++; - } - return 0; -} - -static DEF_SCSI_QCMD(ibmmca_queuecommand) - -static int __ibmmca_abort(Scsi_Cmnd * cmd) -{ - /* Abort does not work, as the adapter never generates an interrupt on - * whatever situation is simulated, even when really pending commands - * are running on the adapters' hardware ! */ - - struct Scsi_Host *shpnt; - unsigned int ldn; - void (*saved_done) (Scsi_Cmnd *); - int target; - int max_pun; - unsigned long imm_command; - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort subroutine called...\n"); -#endif - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* get logical device number, and disable system interrupts */ - printk(KERN_WARNING "IBM MCA SCSI: Sending abort to device pun=%d, lun=%d.\n", target, cmd->device->lun); - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - - /*if cmd for this ldn has already finished, no need to abort */ - if (!ld(shpnt)[ldn].cmd) { - return SUCCESS; - } - - /* Clear ld.cmd, save done function, install internal done, - * send abort immediate command (this enables sys. interrupts), - * and wait until the interrupt arrives. - */ - saved_done = cmd->scsi_done; - cmd->scsi_done = internal_done; - cmd->SCp.Status = 0; - last_scsi_command(shpnt)[ldn] = IM_ABORT_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_ABORT_IMM_CMD); - /* must wait for attention reg not busy */ - /* FIXME - timeout, politeness */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - } - /* write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | ldn, IM_ATTN_REG(shpnt)); -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort queued to adapter...\n"); -#endif - spin_unlock_irq(shpnt->host_lock); - while (!cmd->SCp.Status) - yield(); - spin_lock_irq(shpnt->host_lock); - cmd->scsi_done = saved_done; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort returned with adapter response...\n"); -#endif - - /*if abort went well, call saved done, then return success or error */ - if (cmd->result == (DID_ABORT << 16)) - { - cmd->result |= DID_ABORT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort finished with success.\n"); -#endif - return SUCCESS; - } else { - cmd->result |= DID_NO_CONNECT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort failed.\n"); -#endif - return FAILED; - } -} - -static int ibmmca_abort(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_abort(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int __ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt; - Scsi_Cmnd *cmd_aid; - int ticks, i; - unsigned long imm_command; - - BUG_ON(cmd == NULL); - - ticks = IM_RESET_DELAY * HZ; - shpnt = cmd->device->host; - - if (local_checking_phase_flag(shpnt)) { - printk(KERN_WARNING "IBM MCA SCSI: unable to reset while checking devices.\n"); - return FAILED; - } - - /* issue reset immediate command to subsystem, and wait for interrupt */ - printk("IBM MCA SCSI: resetting all devices.\n"); - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - last_scsi_command(shpnt)[0xf] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[0xf] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - /* must wait for attention reg not busy */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irq(shpnt->host_lock); - yield(); - spin_lock_irq(shpnt->host_lock); - } - /*write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | 0xf, IM_ATTN_REG(shpnt)); - /* wait for interrupt finished or intr_stat register to be set, as the - * interrupt will not be executed, while we are in here! */ - - /* FIXME: This is really really icky we so want a sleeping version of this ! */ - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks && ((inb(IM_INTR_REG(shpnt)) & 0x8f) != 0x8f)) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just return an error */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - return FAILED; - } - - if ((inb(IM_INTR_REG(shpnt)) & 0x8f) == 0x8f) { - /* analysis done by this routine and not by the intr-routine */ - if (inb(IM_INTR_REG(shpnt)) == 0xaf) - reset_status(shpnt) = IM_RESET_FINISHED_OK_NO_INT; - else if (inb(IM_INTR_REG(shpnt)) == 0xcf) - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - else /* failed, 4get it */ - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS_NO_INT; - outb(IM_EOI | 0xf, IM_ATTN_REG(shpnt)); - } - - /* if reset failed, just return an error */ - if (reset_status(shpnt) == IM_RESET_FINISHED_FAIL) { - printk(KERN_ERR "IBM MCA SCSI: reset failed.\n"); - return FAILED; - } - - /* so reset finished ok - call outstanding done's, and return success */ - printk(KERN_INFO "IBM MCA SCSI: Reset successfully completed.\n"); - for (i = 0; i < MAX_LOG_DEV; i++) { - cmd_aid = ld(shpnt)[i].cmd; - if (cmd_aid && cmd_aid->scsi_done) { - ld(shpnt)[i].cmd = NULL; - cmd_aid->result = DID_RESET << 16; - } - } - return SUCCESS; -} - -static int ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_host_reset(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info) -{ - int size = capacity; - info[0] = 64; - info[1] = 32; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 128; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 255; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) - info[2] = 1023; - } - } - return 0; -} - -/* calculate percentage of total accesses on a ldn */ -static int ldn_access_load(struct Scsi_Host *shpnt, int ldn) -{ - if (IBM_DS(shpnt).total_accesses == 0) - return (0); - if (IBM_DS(shpnt).ldn_access[ldn] == 0) - return (0); - return (IBM_DS(shpnt).ldn_access[ldn] * 100) / IBM_DS(shpnt).total_accesses; -} - -/* calculate total amount of r/w-accesses */ -static int ldn_access_total_read_write(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_read_access[i] + IBM_DS(shpnt).ldn_write_access[i]; - return (a); -} - -static int ldn_access_total_inquiry(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_inquiry_access[i]; - return (a); -} - -static int ldn_access_total_modeselect(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_modeselect_access[i]; - return (a); -} - -/* routine to display info in the proc-fs-structure (a deluxe feature) */ -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout) -{ - int len = 0; - int i, id, lun; - unsigned long flags; - int max_pun; - - - spin_lock_irqsave(shpnt->host_lock, flags); /* Check it */ - - max_pun = subsystem_maxid(shpnt); - - len += sprintf(buffer + len, "\n IBM-SCSI-Subsystem-Linux-Driver, Version %s\n\n\n", IBMMCA_SCSI_DRIVER_VERSION); - len += sprintf(buffer + len, " SCSI Access-Statistics:\n"); - len += sprintf(buffer + len, " Device Scanning Order....: %s\n", (ibm_ansi_order) ? "IBM/ANSI" : "New Industry Standard"); -#ifdef CONFIG_SCSI_MULTI_LUN - len += sprintf(buffer + len, " Multiple LUN probing.....: Yes\n"); -#else - len += sprintf(buffer + len, " Multiple LUN probing.....: No\n"); -#endif - len += sprintf(buffer + len, " This Hostnumber..........: %d\n", shpnt->host_no); - len += sprintf(buffer + len, " Base I/O-Port............: 0x%x\n", (unsigned int) (IM_CMD_REG(shpnt))); - len += sprintf(buffer + len, " (Shared) IRQ.............: %d\n", IM_IRQ); - len += sprintf(buffer + len, " Total Interrupts.........: %d\n", IBM_DS(shpnt).total_interrupts); - len += sprintf(buffer + len, " Total SCSI Accesses......: %d\n", IBM_DS(shpnt).total_accesses); - len += sprintf(buffer + len, " Total short SCBs.........: %d\n", IBM_DS(shpnt).scbs); - len += sprintf(buffer + len, " Total long SCBs..........: %d\n", IBM_DS(shpnt).long_scbs); - len += sprintf(buffer + len, " Total SCSI READ/WRITE..: %d\n", ldn_access_total_read_write(shpnt)); - len += sprintf(buffer + len, " Total SCSI Inquiries...: %d\n", ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI Modeselects.: %d\n", ldn_access_total_modeselect(shpnt)); - len += sprintf(buffer + len, " Total SCSI other cmds..: %d\n", IBM_DS(shpnt).total_accesses - ldn_access_total_read_write(shpnt) - - ldn_access_total_modeselect(shpnt) - - ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI command fails.: %d\n\n", IBM_DS(shpnt).total_errors); - len += sprintf(buffer + len, " Logical-Device-Number (LDN) Access-Statistics:\n"); - len += sprintf(buffer + len, " LDN | Accesses [%%] | READ | WRITE | ASSIGNMENTS\n"); - len += sprintf(buffer + len, " -----|--------------|-----------|-----------|--------------\n"); - for (i = 0; i <= MAX_LOG_DEV; i++) - len += sprintf(buffer + len, " %2X | %3d | %8d | %8d | %8d\n", i, ldn_access_load(shpnt, i), IBM_DS(shpnt).ldn_read_access[i], IBM_DS(shpnt).ldn_write_access[i], IBM_DS(shpnt).ldn_assignments[i]); - len += sprintf(buffer + len, " -----------------------------------------------------------\n\n"); - len += sprintf(buffer + len, " Dynamical-LDN-Assignment-Statistics:\n"); - len += sprintf(buffer + len, " Number of physical SCSI-devices..: %d (+ Adapter)\n", IBM_DS(shpnt).total_scsi_devices); - len += sprintf(buffer + len, " Dynamical Assignment necessary...: %s\n", IBM_DS(shpnt).dyn_flag ? "Yes" : "No "); - len += sprintf(buffer + len, " Next LDN to be assigned..........: 0x%x\n", next_ldn(shpnt)); - len += sprintf(buffer + len, " Dynamical assignments done yet...: %d\n", IBM_DS(shpnt).dynamical_assignments); - len += sprintf(buffer + len, "\n Current SCSI-Device-Mapping:\n"); - len += sprintf(buffer + len, " Physical SCSI-Device Map Logical SCSI-Device Map\n"); - len += sprintf(buffer + len, " ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_p(get_scsi(shpnt)[id][lun])); - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_l(get_ldn(shpnt)[id][lun])); - len += sprintf(buffer + len, "\n"); - } - - len += sprintf(buffer + len, "(A = IBM-Subsystem, D = Harddisk, T = Tapedrive, P = Processor, W = WORM,\n"); - len += sprintf(buffer + len, " R = CD-ROM, S = Scanner, M = MO-Drive, C = Medium-Changer, + = unprovided LUN,\n"); - len += sprintf(buffer + len, " - = nothing found, nothing assigned or unprobed LUN)\n\n"); - - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return len; -} - -static int option_setup(char *str) -{ - int ints[IM_MAX_HOSTS]; - char *cur = str; - int i = 1; - - while (cur && isdigit(*cur) && i < IM_MAX_HOSTS) { - ints[i++] = simple_strtoul(cur, NULL, 0); - if ((cur = strchr(cur, ',')) != NULL) - cur++; - } - ints[0] = i - 1; - internal_ibmmca_scsi_setup(cur, ints); - return 1; -} - -__setup("ibmmcascsi=", option_setup); - -static struct mca_driver ibmmca_driver = { - .id_table = ibmmca_id_table, - .driver = { - .name = "ibmmca", - .bus = &mca_bus_type, - .probe = ibmmca_probe, - .remove = __devexit_p(ibmmca_remove), - }, -}; - -static int __init ibmmca_init(void) -{ -#ifdef MODULE - /* If the driver is run as module, read from conf.modules or cmd-line */ - if (boot_options) - option_setup(boot_options); -#endif - - return mca_register_driver_integrated(&ibmmca_driver, MCA_INTEGSCSI); -} - -static void __exit ibmmca_exit(void) -{ - mca_unregister_driver(&ibmmca_driver); -} - -module_init(ibmmca_init); -module_exit(ibmmca_exit); diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c index 8ac6ce792b69..a318264a4ba1 100644 --- a/drivers/scsi/sim710.c +++ b/drivers/scsi/sim710.c @@ -17,7 +17,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *---------------------------------------------------------------------------- * - * MCA card detection code by Trent McNair. + * MCA card detection code by Trent McNair. (now deleted) * Fixes to not explicitly nul bss data from Xavier Bestel. * Some multiboard fixes from Rolf Eike Beer. * Auto probing of EISA config space from Trevor Hemsley. @@ -32,7 +32,6 @@ #include <linux/blkdev.h> #include <linux/device.h> #include <linux/init.h> -#include <linux/mca.h> #include <linux/eisa.h> #include <linux/interrupt.h> #include <scsi/scsi_host.h> @@ -43,7 +42,7 @@ #include "53c700.h" -/* Must be enough for both EISA and MCA */ +/* Must be enough for EISA */ #define MAX_SLOTS 8 static __u8 __initdata id_array[MAX_SLOTS] = { [0 ... MAX_SLOTS-1] = 7 }; @@ -89,7 +88,7 @@ param_setup(char *str) __setup("sim710=", param_setup); static struct scsi_host_template sim710_driver_template = { - .name = "LSI (Symbios) 710 MCA/EISA", + .name = "LSI (Symbios) 710 EISA", .proc_name = "sim710", .this_id = 7, .module = THIS_MODULE, @@ -169,114 +168,6 @@ sim710_device_remove(struct device *dev) return 0; } -#ifdef CONFIG_MCA - -/* CARD ID 01BB and 01BA use the same pos values */ -#define MCA_01BB_IO_PORTS { 0x0000, 0x0000, 0x0800, 0x0C00, 0x1000, 0x1400, \ - 0x1800, 0x1C00, 0x2000, 0x2400, 0x2800, \ - 0x2C00, 0x3000, 0x3400, 0x3800, 0x3C00, \ - 0x4000, 0x4400, 0x4800, 0x4C00, 0x5000 } - -#define MCA_01BB_IRQS { 3, 5, 11, 14 } - -/* CARD ID 004f */ -#define MCA_004F_IO_PORTS { 0x0000, 0x0200, 0x0300, 0x0400, 0x0500, 0x0600 } -#define MCA_004F_IRQS { 5, 9, 14 } - -static short sim710_mca_id_table[] = { 0x01bb, 0x01ba, 0x004f, 0}; - -static __init int -sim710_mca_probe(struct device *dev) -{ - struct mca_device *mca_dev = to_mca_device(dev); - int slot = mca_dev->slot; - int pos[3]; - unsigned int base; - int irq_vector; - short id = sim710_mca_id_table[mca_dev->index]; - static int io_004f_by_pos[] = MCA_004F_IO_PORTS; - static int irq_004f_by_pos[] = MCA_004F_IRQS; - static int io_01bb_by_pos[] = MCA_01BB_IO_PORTS; - static int irq_01bb_by_pos[] = MCA_01BB_IRQS; - char *name; - int clock; - - pos[0] = mca_device_read_stored_pos(mca_dev, 2); - pos[1] = mca_device_read_stored_pos(mca_dev, 3); - pos[2] = mca_device_read_stored_pos(mca_dev, 4); - - /* - * 01BB & 01BA port base by bits 7,6,5,4,3,2 in pos[2] - * - * 000000 <disabled> 001010 0x2800 - * 000001 <invalid> 001011 0x2C00 - * 000010 0x0800 001100 0x3000 - * 000011 0x0C00 001101 0x3400 - * 000100 0x1000 001110 0x3800 - * 000101 0x1400 001111 0x3C00 - * 000110 0x1800 010000 0x4000 - * 000111 0x1C00 010001 0x4400 - * 001000 0x2000 010010 0x4800 - * 001001 0x2400 010011 0x4C00 - * 010100 0x5000 - * - * 00F4 port base by bits 3,2,1 in pos[0] - * - * 000 <disabled> 001 0x200 - * 010 0x300 011 0x400 - * 100 0x500 101 0x600 - * - * 01BB & 01BA IRQ is specified in pos[0] bits 7 and 6: - * - * 00 3 10 11 - * 01 5 11 14 - * - * 00F4 IRQ specified by bits 6,5,4 in pos[0] - * - * 100 5 101 9 - * 110 14 - */ - - if (id == 0x01bb || id == 0x01ba) { - base = io_01bb_by_pos[(pos[2] & 0xFC) >> 2]; - irq_vector = - irq_01bb_by_pos[((pos[0] & 0xC0) >> 6)]; - - clock = 50; - if (id == 0x01bb) - name = "NCR 3360/3430 SCSI SubSystem"; - else - name = "NCR Dual SIOP SCSI Host Adapter Board"; - } else if ( id == 0x004f ) { - base = io_004f_by_pos[((pos[0] & 0x0E) >> 1)]; - irq_vector = - irq_004f_by_pos[((pos[0] & 0x70) >> 4) - 4]; - clock = 50; - name = "NCR 53c710 SCSI Host Adapter Board"; - } else { - return -ENODEV; - } - mca_device_set_name(mca_dev, name); - mca_device_set_claim(mca_dev, 1); - base = mca_device_transform_ioport(mca_dev, base); - irq_vector = mca_device_transform_irq(mca_dev, irq_vector); - - return sim710_probe_common(dev, base, irq_vector, clock, - 0, id_array[slot]); -} - -static struct mca_driver sim710_mca_driver = { - .id_table = sim710_mca_id_table, - .driver = { - .name = "sim710", - .bus = &mca_bus_type, - .probe = sim710_mca_probe, - .remove = __devexit_p(sim710_device_remove), - }, -}; - -#endif /* CONFIG_MCA */ - #ifdef CONFIG_EISA static struct eisa_device_id sim710_eisa_ids[] = { { "CPQ4410" }, @@ -344,10 +235,6 @@ static int __init sim710_init(void) param_setup(sim710); #endif -#ifdef CONFIG_MCA - err = mca_register_driver(&sim710_mca_driver); -#endif - #ifdef CONFIG_EISA err = eisa_driver_register(&sim710_eisa_driver); #endif @@ -361,11 +248,6 @@ static int __init sim710_init(void) static void __exit sim710_exit(void) { -#ifdef CONFIG_MCA - if (MCA_bus) - mca_unregister_driver(&sim710_mca_driver); -#endif - #ifdef CONFIG_EISA eisa_driver_unregister(&sim710_eisa_driver); #endif |