Imported Upstream version 1.2.22upstream/1.2.22upstream

Change-Id: I4d17734839f021e46aef7a30483ac17e8c85fb1d
Signed-off-by: sangwan.kwon <sangwan.kwon@samsung.com>

1 files changed, 279 insertions, 204 deletions

diff --git a/Makefile.in b/Makefile.in
index 25e60871..6b235436 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,6 +16,61 @@
 
 
 VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -36,29 +90,22 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(srcdir)/xmlsec-config.in $(srcdir)/xmlsec-gcrypt.pc.in \
-	$(srcdir)/xmlsec-gnutls.pc.in $(srcdir)/xmlsec-nss.pc.in \
-	$(srcdir)/xmlsec-openssl.pc.in $(srcdir)/xmlsec.pc.in \
-	$(srcdir)/xmlsec.spec.in $(srcdir)/xmlsecConf.sh.in \
-	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
-	TODO config.guess config.sub depcomp install-sh ltmain.sh \
-	missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/configure.in
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = xmlsec1.pc xmlsec1Conf.sh xmlsec1-config \
-	xmlsec1-openssl.pc xmlsec1-gnutls.pc xmlsec1-gcrypt.pc \
-	xmlsec1-nss.pc xmlsec1.spec
+CONFIG_CLEAN_FILES = xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gnutls.pc \
+	xmlsec1-gcrypt.pc xmlsec1-nss.pc xmlsec1.spec xmlsec1Conf.sh \
+	xmlsec1-config
 CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
@@ -90,30 +137,71 @@ am__uninstall_files_from_dir = { \
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \
 	"$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
 SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(srcdir)/xmlsec-config.in $(srcdir)/xmlsec-gcrypt.pc.in \
+	$(srcdir)/xmlsec-gnutls.pc.in $(srcdir)/xmlsec-nss.pc.in \
+	$(srcdir)/xmlsec-openssl.pc.in $(srcdir)/xmlsec.pc.in \
+	$(srcdir)/xmlsec.spec.in $(srcdir)/xmlsecConf.sh.in AUTHORS \
+	COPYING ChangeLog INSTALL NEWS README TODO compile \
+	config.guess config.sub install-sh ltmain.sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -123,6 +211,7 @@ am__remove_distdir = \
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -150,6 +239,7 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -189,6 +279,10 @@ GNUTLS_CRYPTO_LIB = @GNUTLS_CRYPTO_LIB@
 GNUTLS_LIBS = @GNUTLS_LIBS@
 GNUTLS_MIN_VERSION = @GNUTLS_MIN_VERSION@
 GREP = @GREP@
+GTKDOC_MKDB = @GTKDOC_MKDB@
+GTKDOC_MKHTML = @GTKDOC_MKHTML@
+GTKDOC_MKTMPL = @GTKDOC_MKTMPL@
+GTKDOC_SCAN = @GTKDOC_SCAN@
 HELP2MAN = @HELP2MAN@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -208,6 +302,7 @@ LIBXSLT_CFLAGS = @LIBXSLT_CFLAGS@
 LIBXSLT_CONFIG = @LIBXSLT_CONFIG@
 LIBXSLT_LIBS = @LIBXSLT_LIBS@
 LIBXSLT_MIN_VERSION = @LIBXSLT_MIN_VERSION@
+LIBXSLT_PC_FILE_COND = @LIBXSLT_PC_FILE_COND@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
@@ -246,6 +341,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
 PKGCONFIG_PRESENT = @PKGCONFIG_PRESENT@
 PKG_CONFIG = @PKG_CONFIG@
 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
@@ -262,7 +358,6 @@ XMLSEC_APP_DEFINES = @XMLSEC_APP_DEFINES@
 XMLSEC_CFLAGS = @XMLSEC_CFLAGS@
 XMLSEC_CORE_CFLAGS = @XMLSEC_CORE_CFLAGS@
 XMLSEC_CORE_LIBS = @XMLSEC_CORE_LIBS@
-XMLSEC_CRYPTO = @XMLSEC_CRYPTO@
 XMLSEC_CRYPTO_CFLAGS = @XMLSEC_CRYPTO_CFLAGS@
 XMLSEC_CRYPTO_DISABLED_LIST = @XMLSEC_CRYPTO_DISABLED_LIST@
 XMLSEC_CRYPTO_EXTRA_LDFLAGS = @XMLSEC_CRYPTO_EXTRA_LDFLAGS@
@@ -270,6 +365,7 @@ XMLSEC_CRYPTO_LIB = @XMLSEC_CRYPTO_LIB@
 XMLSEC_CRYPTO_LIBS = @XMLSEC_CRYPTO_LIBS@
 XMLSEC_CRYPTO_LIST = @XMLSEC_CRYPTO_LIST@
 XMLSEC_CRYPTO_PC_FILES_LIST = @XMLSEC_CRYPTO_PC_FILES_LIST@
+XMLSEC_DEFAULT_CRYPTO = @XMLSEC_DEFAULT_CRYPTO@
 XMLSEC_DEFINES = @XMLSEC_DEFINES@
 XMLSEC_DL_INCLUDES = @XMLSEC_DL_INCLUDES@
 XMLSEC_DL_LIBS = @XMLSEC_DL_LIBS@
@@ -289,6 +385,7 @@ XMLSEC_NO_DSA = @XMLSEC_NO_DSA@
 XMLSEC_NO_GCRYPT = @XMLSEC_NO_GCRYPT@
 XMLSEC_NO_GNUTLS = @XMLSEC_NO_GNUTLS@
 XMLSEC_NO_GOST = @XMLSEC_NO_GOST@
+XMLSEC_NO_GOST2012 = @XMLSEC_NO_GOST2012@
 XMLSEC_NO_HMAC = @XMLSEC_NO_HMAC@
 XMLSEC_NO_LIBXSLT = @XMLSEC_NO_LIBXSLT@
 XMLSEC_NO_MD5 = @XMLSEC_NO_MD5@
@@ -303,7 +400,6 @@ XMLSEC_NO_SHA256 = @XMLSEC_NO_SHA256@
 XMLSEC_NO_SHA384 = @XMLSEC_NO_SHA384@
 XMLSEC_NO_SHA512 = @XMLSEC_NO_SHA512@
 XMLSEC_NO_X509 = @XMLSEC_NO_X509@
-XMLSEC_NO_XKMS = @XMLSEC_NO_XKMS@
 XMLSEC_NO_XMLDSIG = @XMLSEC_NO_XMLDSIG@
 XMLSEC_NO_XMLENC = @XMLSEC_NO_XMLENC@
 XMLSEC_NSS_CFLAGS = @XMLSEC_NSS_CFLAGS@
@@ -318,6 +414,7 @@ XMLSEC_VERSION_MAJOR = @XMLSEC_VERSION_MAJOR@
 XMLSEC_VERSION_MINOR = @XMLSEC_VERSION_MINOR@
 XMLSEC_VERSION_SAFE = @XMLSEC_VERSION_SAFE@
 XMLSEC_VERSION_SUBMINOR = @XMLSEC_VERSION_SUBMINOR@
+XSLTPROC = @XSLTPROC@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
@@ -374,7 +471,7 @@ NULL =
 SAFE_VERSION = @XMLSEC_VERSION_SAFE@
 SUBDIRS = include src apps man docs
 TEST_APP = apps/xmlsec1$(EXEEXT)
-DEFAULT_CRYPTO = @XMLSEC_CRYPTO@
+DEFAULT_CRYPTO = @XMLSEC_DEFAULT_CRYPTO@
 bin_SCRIPTS = xmlsec1-config
 pkgconfig_DATA = xmlsec1.pc @XMLSEC_CRYPTO_PC_FILES_LIST@
 pkgconfigdir = $(libdir)/pkgconfig
@@ -462,7 +559,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -483,8 +579,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -498,10 +594,6 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 xmlsec1.pc: $(top_builddir)/config.status $(srcdir)/xmlsec.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
-xmlsec1Conf.sh: $(top_builddir)/config.status $(srcdir)/xmlsecConf.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-xmlsec1-config: $(top_builddir)/config.status $(srcdir)/xmlsec-config.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
 xmlsec1-openssl.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-openssl.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 xmlsec1-gnutls.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-gnutls.pc.in
@@ -512,10 +604,17 @@ xmlsec1-nss.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-nss.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 xmlsec1.spec: $(top_builddir)/config.status $(srcdir)/xmlsec.spec.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1Conf.sh: $(top_builddir)/config.status $(srcdir)/xmlsecConf.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-config: $(top_builddir)/config.status $(srcdir)/xmlsec-config.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 install-binSCRIPTS: $(bin_SCRIPTS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
@@ -555,8 +654,11 @@ distclean-libtool:
 	-rm -f libtool config.lt
 install-confexecDATA: $(confexec_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(confexecdir)" || $(MKDIR_P) "$(DESTDIR)$(confexecdir)"
 	@list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(confexecdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(confexecdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -573,8 +675,11 @@ uninstall-confexecDATA:
 	dir='$(DESTDIR)$(confexecdir)'; $(am__uninstall_files_from_dir)
 install-m4dataDATA: $(m4data_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
 	@list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(m4datadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(m4datadir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -591,8 +696,11 @@ uninstall-m4dataDATA:
 	dir='$(DESTDIR)$(m4datadir)'; $(am__uninstall_files_from_dir)
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -609,22 +717,25 @@ uninstall-pkgconfigDATA:
 	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -639,57 +750,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -705,12 +771,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -722,15 +783,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -739,9 +796,31 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -777,13 +856,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -815,40 +891,42 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -859,8 +937,6 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -872,18 +948,19 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -906,7 +983,7 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -1046,29 +1123,30 @@ ps-am:
 uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \
 	uninstall-m4dataDATA uninstall-pkgconfigDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-binSCRIPTS \
-	install-confexecDATA install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am \
-	install-m4dataDATA install-man install-pdf install-pdf-am \
-	install-pkgconfigDATA install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am \
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
+	dist-tarZ dist-xz dist-zip distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binSCRIPTS install-confexecDATA install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-m4dataDATA install-man install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am \
 	uninstall-binSCRIPTS uninstall-confexecDATA \
 	uninstall-m4dataDATA uninstall-pkgconfigDATA
 
+.PRECIOUS: Makefile
+
 
 docs: docs-man
 	@(cd docs && $(MAKE) docs)
@@ -1082,30 +1160,34 @@ docs-man:
 check: check-all check-info
 
 check-all: $(TEST_APP) 
-	@($(PRECHECK_COMMANDS) && \
 	for crypto in $(CHECK_CRYPTO_LIST) ; do \
-	    echo "=================== Checking xmlsec-$$crypto =================================" && \
-	    $(SHELL) ./tests/testrun.sh \
-	        $(ABS_SRCDIR)/tests/testKeys.sh \
-	        $$crypto \
-	        $(ABS_SRCDIR)/tests \
-	        $(ABS_BUILDDIR)/$(TEST_APP) der \
-	    && \
-	    $(SHELL) ./tests/testrun.sh \
-	        $(ABS_SRCDIR)/tests/testDSig.sh \
-	        $$crypto \
-	        $(ABS_SRCDIR)/tests \
-	        $(ABS_BUILDDIR)/$(TEST_APP) \
-	        der \
-	    && \
-	    $(SHELL) ./tests/testrun.sh \
-	        $(ABS_SRCDIR)/tests/testEnc.sh \
-	        $$crypto \
-	        $(ABS_SRCDIR)/tests \
-	        $(ABS_BUILDDIR)/$(TEST_APP) \
-	        der \
-	    ; \
-	done; )
+		make check-crypto-$$crypto ; \
+	done
+
+check-crypto-%: $(TEST_APP) 
+	@($(PRECHECK_COMMANDS) && \
+    echo "=================== Checking xmlsec-$* =================================" && \
+    $(SHELL) ./tests/testrun.sh \
+        $(ABS_SRCDIR)/tests/testKeys.sh \
+        $* \
+        $(ABS_SRCDIR)/tests \
+        $(ABS_BUILDDIR)/$(TEST_APP) der \
+    && \
+    $(SHELL) ./tests/testrun.sh \
+        $(ABS_SRCDIR)/tests/testDSig.sh \
+        $* \
+        $(ABS_SRCDIR)/tests \
+        $(ABS_BUILDDIR)/$(TEST_APP) \
+        der \
+    && \
+    $(SHELL) ./tests/testrun.sh \
+        $(ABS_SRCDIR)/tests/testEnc.sh \
+        $* \
+        $(ABS_SRCDIR)/tests \
+        $(ABS_BUILDDIR)/$(TEST_APP) \
+        der \
+    ; \
+	)
 
 check-info:
 	@echo "---------------------------- ATTENTION -----------------------------------"
@@ -1144,20 +1226,13 @@ check-enc: $(TEST_APP)
 	    der \
 	)
 
-check-xkms: $(TEST_APP) 	
-	@($(PRECHECK_COMMANDS) && \
-	$(SHELL) ./tests/testrun.sh \
-	    $(ABS_SRCDIR)/tests/testXKMS.sh \
-	    $(DEFAULT_CRYPTO) \
-	    $(ABS_SRCDIR)/tests \
-	    $(ABS_BUILDDIR)/$(TEST_APP) \
-	    der \
-	)
-
 memcheck-res:
 	@grep -i 'ERROR SUMMARY' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
 	@grep -i 'in use at exit' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
-	@grep -i 'total heap usage' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'definitely lost:' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'indirectly lost:' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'possibly lost:' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'still reachable:' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
 
 memcheck: $(TEST_APP)
 	@(export DEBUG_MEMORY=1 && $(MAKE) check && $(MAKE) memcheck-res)