Imported Upstream version 2.7.3upstream/2.7.3upstream

3 files changed, 785 insertions, 0 deletions

diff --git a/man/Makefile.am b/man/Makefile.am
new file mode 100644
index 0000000..0a7311e
--- /dev/null
+++ b/man/Makefile.am
@@ -0,0 +1,37 @@
+# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+# 
+
+drivermandir = $(DRIVER_MAN_DIR)
+
+driverman_PRE = $(DRIVER_NAME).man
+
+driverman_DATA = $(driverman_PRE:man=$(DRIVER_MAN_SUFFIX))
+
+EXTRA_DIST = $(DRIVER_NAME).man
+
+CLEANFILES = $(driverman_DATA)
+
+SUFFIXES = .$(DRIVER_MAN_SUFFIX) .man
+
+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
+.man.$(DRIVER_MAN_SUFFIX):
+	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
diff --git a/man/Makefile.in b/man/Makefile.in
new file mode 100644
index 0000000..ad88b80
--- /dev/null
+++ b/man/Makefile.in
@@ -0,0 +1,481 @@
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+# 
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = man
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(drivermandir)"
+DATA = $(driverman_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASE_CFLAGS = @BASE_CFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
+DRIVER_NAME = @DRIVER_NAME@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MAN_SUBSTS = @MAN_SUBSTS@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
+MTDEV_CFLAGS = @MTDEV_CFLAGS@
+MTDEV_LIBS = @MTDEV_LIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRICT_CFLAGS = @STRICT_CFLAGS@
+STRIP = @STRIP@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
+VERSION = @VERSION@
+XI22_CFLAGS = @XI22_CFLAGS@
+XI22_LIBS = @XI22_LIBS@
+XORG_CFLAGS = @XORG_CFLAGS@
+XORG_LIBS = @XORG_LIBS@
+XORG_MAN_PAGE = @XORG_MAN_PAGE@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+inputdir = @inputdir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sdkdir = @sdkdir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+drivermandir = $(DRIVER_MAN_DIR)
+driverman_PRE = $(DRIVER_NAME).man
+driverman_DATA = $(driverman_PRE:man=$(DRIVER_MAN_SUFFIX))
+EXTRA_DIST = $(DRIVER_NAME).man
+CLEANFILES = $(driverman_DATA)
+SUFFIXES = .$(DRIVER_MAN_SUFFIX) .man
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .$(DRIVER_MAN_SUFFIX) .man
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign man/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-drivermanDATA: $(driverman_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(drivermandir)" || $(MKDIR_P) "$(DESTDIR)$(drivermandir)"
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(drivermandir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(drivermandir)" || exit $$?; \
+	done
+
+uninstall-drivermanDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(driverman_DATA)'; test -n "$(drivermandir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(drivermandir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(drivermandir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-drivermanDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-drivermanDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-drivermanDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-drivermanDATA
+
+
+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
+.man.$(DRIVER_MAN_SUFFIX):
+	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/man/evdev.man b/man/evdev.man
new file mode 100644
index 0000000..2709d7a
--- /dev/null
+++ b/man/evdev.man
@@ -0,0 +1,267 @@
+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH EVDEV __drivermansuffix__ __vendorversion__
+.SH NAME
+evdev \- Generic Linux input driver
+.SH SYNOPSIS
+.nf
+.B "Section \*qInputDevice\*q"
+.BI "  Identifier \*q" devname \*q
+.B  "  Driver \*qevdev\*q"
+.BI "  Option \*qDevice\*q   \*q" devpath \*q
+.BI "  Option \*qEmulate3Buttons\*q     \*q" True \*q
+.BI "  Option \*qEmulate3Timeout\*q     \*q" 50 \*q
+.BI "  Option \*qGrabDevice\*q     \*q" False \*q
+\ \ ...
+.B EndSection
+.fi
+.SH DESCRIPTION
+.B evdev 
+is an __xservername__ input driver for Linux\'s generic event devices.  It
+therefore supports all input devices that the kernel knows about, including
+most mice, keyboards, tablets and touchscreens.
+.B evdev
+is the default driver on the major Linux distributions.
+.PP
+The 
+.B evdev
+driver can serve as both a pointer and a keyboard input device. Multiple
+input devices are supported by multiple instances of this driver, with one
+InputDevice section of your __xconfigfile__ for each input device that will
+use this driver.
+.PP
+It is recommended that
+.B evdev
+devices are configured through the
+.B InputClass
+directive (refer to __xconfigfile__(__filemansuffix__)) instead of manual
+per-device configuration. Devices configured in the
+__xconfigfile__(__filemansuffix__) are not hot-plug capable.
+.PP
+.SH SUPPORTED HARDWARE
+In general, any input device that the kernel has a driver for can be accessed
+through the 
+.B evdev
+driver.  See the Linux kernel documentation for a complete list.
+.PP
+.SH CONFIGURATION DETAILS
+Please refer to __xconfigfile__(__filemansuffix__) for general configuration
+details and for options that can be used with all input drivers.  This
+section only covers configuration details specific to this driver.
+.PP
+The following driver 
+.B Options
+are supported:
+.TP 7
+.BI "Option \*qButtonMapping\*q \*q" string \*q
+Sets the button mapping for this device. The mapping is a space-separated list
+of button mappings that correspond in order to the physical buttons on the
+device (i.e. the first number is the mapping for button 1, etc.). The default
+mapping is "1 2 3 ... 32". A mapping of 0 deactivates the button. Multiple
+buttons can have the same mapping.
+For example, a left-handed mouse with deactivated scroll-wheel would use a
+mapping of "3 2 1 0 0". Invalid mappings are ignored and the default mapping
+is used. Buttons not specified in the user's mapping use the default mapping.
+.TP 7
+.BI "Option \*qDevice\*q \*q" string \*q
+Specifies the device through which the device can be accessed.  This will 
+generally be of the form \*q/dev/input/eventX\*q, where X is some integer.
+The mapping from device node to hardware is system-dependent. Property:
+"Device Node" (read-only).
+.TP 7
+.BI "Option \*qDragLockButtons\*q \*q" "L1 B2 L3 B4" \*q
+Sets \*qdrag lock buttons\*q that simulate holding a button down, so
+that low dexterity people do not have to hold a button down at the
+same time they move a mouse cursor. Button numbers occur in pairs,
+with the lock button number occurring first, followed by the button
+number that is the target of the lock button. Property: "Evdev
+Drag Lock Buttons".
+.TP 7
+.BI "Option \*qDragLockButtons\*q \*q" "M1" \*q
+Sets a \*qmaster drag lock button\*q that acts as a \*qMeta Key\*q
+indicating that the next button pressed is to be
+\*qdrag locked\*q. Property: "Evdev Drag Lock Buttons".
+.TP 7
+.TP 7
+.BI "Option \*qEmulate3Buttons\*q \*q" boolean \*q
+Enable/disable the emulation of the third (middle) mouse button for mice
+which only have two physical buttons.  The third button is emulated by
+pressing both buttons simultaneously.  Default: off. Property: "Evdev Middle
+Button Emulation".
+.TP 7
+.BI "Option \*qEmulate3Timeout\*q \*q" integer \*q
+Sets the timeout (in milliseconds) that the driver waits before deciding
+if two buttons where pressed "simultaneously" when 3 button emulation is
+enabled.  Default: 50. Property: "Evdev Middle Button Timeout".
+.TP 7
+.BI "Option \*qEmulateWheel\*q \*q" boolean \*q
+Enable/disable "wheel" emulation.  Wheel emulation means emulating button
+press/release events when the mouse is moved while a specific real button
+is pressed.  Wheel button events (typically buttons 4 and 5) are
+usually used for scrolling.  Wheel emulation is useful for getting wheel-like
+behaviour with trackballs.  It can also be useful for mice with 4 or
+more buttons but no wheel.  See the description of the
+.BR EmulateWheelButton ,
+.BR EmulateWheelInertia ,
+.BR EmulateWheelTimeout ,
+.BR XAxisMapping ,
+and
+.B YAxisMapping
+options.  Default: off. Property "Evdev Wheel Emulation".
+.TP 7
+.BI "Option \*qEmulateWheelButton\*q \*q" integer \*q
+Specifies which button must be held down to enable wheel emulation mode.
+While this button is down, X and/or Y pointer movement will generate button
+press/release events as specified for the
+.B XAxisMapping
+and
+.B YAxisMapping
+settings. If the button is 0 and
+.BR EmulateWheel
+is on, any motion of the device is converted into wheel events. Default: 4.
+Property: "Evdev Wheel Emulation Button".
+.TP 7
+.BI "Option \*qEmulateWheelInertia\*q \*q" integer \*q
+Specifies how far (in pixels) the pointer must move to generate button
+press/release events in wheel emulation mode.  Default: 10. Property: "Evdev
+Wheel Emulation Inertia".
+.TP 7
+.BI "Option \*qEmulateWheelTimeout\*q \*q" integer \*q
+Specifies the time in milliseconds the
+.BR EmulateWheelButton
+must be pressed before wheel emulation is started. If the
+.BR EmulateWheelButton
+is released before this timeout, the original button press/release event
+is sent.  Default: 200. Property: "Evdev Wheel Emulation Timeout".
+.TP 7
+.BI "Option \*qEmulateThirdButton\*q \*q" boolean \*q
+Enable third button emulation. Third button emulation emits a right button
+event (by default) by pressing and holding the first button. The first
+button must be held down for the configured timeout and must not move more
+than the configured threshold for the emulation to activate. Otherwise, the
+first button event is posted as normal. Default: off.  Property: "Evdev
+Third Button Emulation".
+.TP 7
+.BI "Option \*qEmulateThirdButtonTimeout\*q \*q" integer \*q
+Specifies the timeout in milliseconds between the initial button press and
+the generation of the emulated button event.
+Default: 1000. Property: "Evdev Third Button Emulation Timeout".
+.TP 7
+.BI "Option \*qEmulateThirdButtonButton\*q \*q" integer \*q
+Specifies the physical button number to be emitted if third button emulation
+is triggered.
+Default: 3.  Property: "Evdev Third Button Button".
+.TP 7
+.BI "Option \*qEmulateThirdButtonMoveThreshold\*q \*q" integer \*q
+Specifies the maximum move fuzz in device coordinates for third button
+emulation. If the device moves by more than this threshold before the third
+button emulation is triggered, the emulation is cancelled and a first button
+event is generated as normal.
+Default: 20. Property: "Evdev Third Button Emulation Threshold".
+.TP 7
+.BI "Option \*qGrabDevice\*q \*q" boolean \*q
+Force a grab on the event device. Doing so will ensure that no other driver
+can initialise the same device and it will also stop the device from sending
+events to /dev/kbd or /dev/input/mice. Events from this device will not be
+sent to virtual devices (e.g. rfkill or the Macintosh mouse button emulation).
+Default: disabled.
+.TP 7
+.BI "Option \*qInvertX\*q \*q" Bool \*q
+.TP 7
+.BI "Option \*qInvertY\*q \*q" Bool \*q
+Invert the given axis. Default: off. Property: "Evdev Axis Inversion".
+.TP 7
+.BI "Option \*qIgnoreRelativeAxes\*q \*q" Bool \*q
+.TP 7
+.BI "Option \*qIgnoreAbsoluteAxes\*q \*q" Bool \*q
+Ignore the specified type of axis. Default: unset. The X server cannot deal
+with devices that have both relative and absolute axes. Evdev tries to guess
+wich axes to ignore given the device type and disables absolute axes for
+mice and relative axes for tablets, touchscreens and touchpad. These options
+allow to forcibly disable an axis type. Mouse wheel axes are exempt and will
+work even if relative axes are ignored. No property, this configuration must
+be set in the configuration.
+.br
+If either option is set to False, the driver will not ignore the specified
+axes regardless of the presence of other axes. This may trigger buggy
+behavior and events from this axis are always forwarded. Users are
+discouraged from setting this option.
+.TP 7
+.BI "Option \*qCalibration\*q \*q" "min-x max-x min-y max-y" \*q
+Calibrates the X and Y axes for devices that need to scale to a different
+coordinate system than reported to the X server. This feature is required
+for devices that need to scale to a different coordinate system than
+originally reported by the kernel (e.g. touchscreens). The scaling to the
+custom coordinate system is done in-driver and the X server is unaware of
+the transformation. Property: "Evdev Axis Calibration".
+.TP 7
+.B Option \*qMode\*q \*qRelative\*q\fP|\fP\*qAbsolute\*q
+Sets the mode of the device if device has absolute axes.
+The default value for touchpads is relative, for other absolute.
+This option has no effect on devices without absolute axes.
+.TP 7
+.BI "Option \*qSwapAxes\*q \*q" Bool \*q
+Swap x/y axes. Default: off. Property: "Evdev Axes Swap".
+.TP 7
+.BI "Option \*qXAxisMapping\*q \*q" "N1 N2" \*q
+Specifies which buttons are mapped to motion in the X direction in wheel
+emulation mode.  Button number
+.I N1
+is mapped to the negative X axis motion and button number
+.I N2
+is mapped to the positive X axis motion.  Default: no mapping. Property:
+"Evdev Wheel Emulation Axes".
+.TP 7
+.BI "Option \*qYAxisMapping\*q \*q" "N1 N2" \*q
+Specifies which buttons are mapped to motion in the Y direction in wheel
+emulation mode.  Button number
+.I N1
+is mapped to the negative Y axis motion and button number
+.I N2
+is mapped to the positive Y axis motion.  Default: "4 5". Property:
+"Evdev Wheel Emulation Axes".
+
+.SH SUPPORTED PROPERTIES
+The following properties are provided by the
+.B evdev
+driver.
+.TP 7
+.BI "Evdev Axis Calibration"
+4 32-bit values, order min-x, max-x, min-y, max-y or 0 values to disable
+in-driver axis calibration.
+.TP 7
+.BI "Evdev Axis Inversion"
+2 boolean values (8 bit, 0 or 1), order X, Y. 1 inverts the axis.
+.TP 7
+.BI "Evdev Axes Swap"
+1 boolean value (8 bit, 0 or 1). 1 swaps x/y axes.
+.TP 7
+.BI "Evdev Drag Lock Buttons"
+8-bit. Either 1 value or pairs of values. Value range 0-32, 0 disables a
+value.
+.TP 7
+.BI "Evdev Middle Button Emulation"
+1 boolean value (8 bit, 0 or 1).
+.TP 7
+.BI "Evdev Middle Button Timeout"
+1 16-bit positive value.
+.TP 7
+.BI "Evdev Wheel Emulation"
+1 boolean value (8 bit, 0 or 1).
+.TP 7
+.BI "Evdev Wheel Emulation Axes"
+4 8-bit values, order X up, X down, Y up, Y down. 0 disables a value.
+.TP 7
+.BI "Evdev Wheel Emulation Button"
+1 8-bit value, allowed range 0-32, 0 disables the button.
+.TP 7
+.BI "Evdev Wheel Emulation Inertia"
+1 16-bit positive value.
+.TP 7
+.BI "Evdev Wheel Emulation Timeout"
+1 16-bit positive value.
+
+.SH AUTHORS
+Kristian Høgsberg, Peter Hutterer
+.SH "SEE ALSO"
+__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)