diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..b3e01ea --- /dev/null +++ b/Makefile @@ -0,0 +1,392 @@ +# +# This code contains changes by +# Gunnar Ritter, Freiburg i. Br., Germany, 2002. All rights reserved. +# +# Conditions 1, 2, and 4 and the no-warranty notice below apply +# to these changes. +# +# +# Copyright (c) 1980, 1993 +# The Regents of the University of California. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# 3. All advertising materials mentioning features or use of this software +# must display the following acknowledgement: +# This product includes software developed by the University of +# California, Berkeley and its contributors. +# 4. Neither the name of the University nor the names of its contributors +# may be used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +# SUCH DAMAGE. +# +# +# Copyright(C) Caldera International Inc. 2001-2002. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# Redistributions of source code and documentation must retain the +# above copyright notice, this list of conditions and the following +# disclaimer. +# Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# All advertising materials mentioning features or use of this software +# must display the following acknowledgement: +# This product includes software developed or owned by Caldera +# International, Inc. +# Neither the name of Caldera International, Inc. nor the names of +# other contributors may be used to endorse or promote products +# derived from this software without specific prior written permission. +# +# USE OF THE SOFTWARE PROVIDED FOR UNDER THIS LICENSE BY CALDERA +# INTERNATIONAL, INC. AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR +# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL CALDERA INTERNATIONAL, INC. BE +# LIABLE FOR ANY DIRECT, INDIRECT INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# from Makefile 7.13.1.3 (2.11BSD GTE) 1996/10/23 +# +# @(#)Makefile 1.50 (gritter) 2/20/05 +# + +# +# Destinations for installation. $(PRESERVEDIR) is used for recovery files. +# It will get mode 1777. +# +PREFIX = /usr/local +BINDIR = $(PREFIX)/bin +LIBEXECDIR = $(PREFIX)/libexec +MANDIR = $(PREFIX)/share/man +PRESERVEDIR = /var/preserve + +# +# DESTDIR is prepended to the installation paths. It is mostly useful +# for package building and should be left empty otherwise. +# +DESTDIR = + +# +# A BSD-like install program. GNU install will fit well here, too. +# +INSTALL = /usr/ucb/install + +# +# Compiler and linker flags. +# +# On HP-UX, add -D_INCLUDE__STDC_A1_SOURCE to CPPFLAGS. +# +#CFLAGS = +#CPPFLAGS = +#LDFLAGS = +#LDADD = + +# +# All of the following settings are quite recommended, so you should only +# change them if it becomes really necessary. +# +# Remove -DMB to build without multibyte character support. This will be +# necessary if the compiler complains about a missing wchar.h, wctype.h, +# mbtowc(), mbrtowc(), btowc(), wcwidth() etc. You will likely also have +# to use the old regular expression code in these cases (see below). +# Remove -DBIT8 to get a 7bit-only ex. This setting is mostly provided for +# testing the internationalization code against the older version and +# should not normally be removed. +# Add -DNO_BE_BACKSLASH to make backslash a regular character inside RE +# bracket expressions. This is required for POSIX conformance but +# conflicts with historical practice for ex. +# +# Some historic comments: +# +# Ex is very large - this version will not fit on PDP-11's without overlay +# software. Things that can be turned off to save +# space include LISPCODE (-l flag, showmatch and lisp options), CHDIR (the +# previously undocumented chdir command.) +# +# If your system expands tabs to 4 spaces you should -DTABS=4 below +# +FEATURES = -DLISPCODE -DCHDIR -DFASTTAG -DUCVISUAL -DMB -DBIT8 + +# +# This disables the LC_CTYPE locale settings and assumes all characters +# upwards from octal 0240 are printable ones, like in ISO 8859-1. It +# should only be used if the system's locales are broken. It cannot be +# used in combination with -DMB. +# +#CHARSET = -DISO8859_1 + +# +# If you want LC_MESSAGES support using catgets(), define this. To make +# any practical use of it, you also have to create a message catalogue, +# put it in a proper location and change UNKNOWN to its name. See your +# system's documentation on "gencat" or on language support in general +# for further information. This setting is not interesting at the current +# time unless you want to contribute internationalized message catalogues. +# +#LANGMSG = -DLANGMSG -DCATNAME='"UNKNOWN"' + +# +# For POSIX regular expressions, e.g. the star applied to subexpressions +# as in \(ab\)* and localized regular expressions like [:class:], [.c.], +# and [=c=], you need Caldera's 'UNIX(R) Regular Expression Library' or +# the included derivative of it. +# +# Comment out the three following lines if you do not have it or if it +# does not compile; it needs some advanced multibyte character support +# (wchar.h, wctype.h, btowc() etc.) which is not provided by older +# compilation environments. +# +REINC = -I./libuxre -DUXRE +RELIB = -L./libuxre -luxre +RETGT = uxre + +# +# VMUNIX should be correct for any modern Unix. +# +# Historic comments: +# +# VMUNIX makes ex considerably larger, raising +# many limits and improving speed and simplicity of maintenance. It is +# suitable only for a VAX or other large machine, and then probably only in +# a paged system. +# +# Don't define VFORK unless your system has the VFORK system call, +# which is like fork but the two processes have only one data space until the +# child execs. This speeds up ex by saving the memory copy. +# +# Note by Gunnar Ritter: vfork() is unreliable and one of the worst +# hacks in Unix history. Do not define VFORK unless you have a +# special good reason for that. +# +OSTYPE = -DVMUNIX + +# +# On VMUNIX systems, ex can normally edit files up to 32 MB of size. LARGEF +# raises this limit to around 1 GB, but ex will consume much more of core +# and temp file space then. +# +#LARGEF = -DLARGEF + +# +# The next setting is a crucial one since it determines the way ex +# gets its knowledge about the terminal's capabilities. If you get +# weird results, try using another library here. Uncomment exactly +# one entry. +# +# On System V, the terminfo library may be more accurate than the termcap +# file. To use it, link against the curses library. +# +#TERMLIB = curses +# +# You may also get terminfo access by using the ncurses library. +# +#TERMLIB = ncurses +# +# The preferred choice for ex on Linux distributions, other systems that +# provide a good termcap file, or when setting the TERMCAP environment +# variable is deemed sufficient, is the included 2.11BSD termcap library. +# +TERMLIB = termlib + +# +# Since ex uses sbrk() internally, a conflict with the libc's version of +# malloc() must be avoided. There are two ways to work around this problem. +# The first is to allocate a static pool for all malloc purposes. This will +# work on any kind of system. +# +#MALLOC=malloc.o +# +# If mmap() can be used to allocate anonymous memory, this is the preferred +# choice as it allows to grow memory dynamically as it is needed. This will +# usually work unless you are compiling for a vector machine or another +# unusual enviroment. +MALLOC=mapmalloc.o + +############################################################################### +# # +# That's it. You do not normally need to change anything below here. # +# # +############################################################################### + +#WARN = -Wall -Wno-parentheses -Werror + +STRIP = -s +RECOVER = -DEXRECOVER=\"$(LIBEXECDIR)/exrecover\" \ + -DEXPRESERVE=\"$(LIBEXECDIR)/expreserve\" +CCFLAGS = $(CFLAGS) $(WARN) $(CPPFLAGS) $(FEATURES) $(CHARSET) $(OSTYPE) \ + $(LARGEF) $(RECOVER) $(LANGMSG) $(REINC) $(RPMCFLAGS) +TLIB = libterm/libtermlib.a +INCLUDE = /usr/include +OBJS = ex.o ex_addr.o ex_cmds.o ex_cmds2.o ex_cmdsub.o \ + ex_data.o ex_extern.o ex_get.o ex_io.o ex_put.o ex_re.o \ + ex_set.o ex_subr.o ex_tagio.o ex_temp.o ex_tty.o ex_unix.o \ + ex_v.o ex_vadj.o ex_vget.o ex_vmain.o ex_voper.o \ + ex_vops.o ex_vops2.o ex_vops3.o ex_vput.o ex_vwind.o \ + printf.o ex_version.o $(MALLOC) +HDRS = ex.h ex_argv.h ex_re.h ex_temp.h ex_tty.h ex_tune.h ex_vars.h \ + ex_vis.h libterm/libterm.h +SRC1 = ex.c ex_addr.c ex_cmds.c ex_cmds2.c ex_cmdsub.c +SRC2 = ex_data.c ex_get.c ex_io.c ex_put.c ex_re.c +SRC3 = ex_set.c ex_subr.c ex_tagio.c ex_temp.c ex_tty.c ex_unix.c +SRC4 = ex_v.c ex_vadj.c ex_vget.c ex_vmain.c ex_voper.c +SRC5 = ex_vops.c ex_vops2.c ex_vops3.c ex_vput.c ex_vwind.c +SRC6 = printf.c expreserve.c exrecover.c ex_version.c +SRC7 = mapmalloc.c malloc.c + +.SUFFIXES: .o .c +.c.o: ; $(CC) $(CCFLAGS) -c $< + +all: $(RETGT) exrecover expreserve ex + +ex: $(TLIB) $(OBJS) + $(CC) -o ex $(LDFLAGS) $(OBJS) $(LDADD) -Llibterm -l$(TERMLIB) $(RELIB) + size ex + +$(TLIB): libterm/termcap.c libterm/tgoto.c libterm/tputs.c libterm/libterm.h + @cd libterm && $(MAKE) CC="$(CC)" \ + COPT="$(CFLAGS) $(WARN) $(CPPFLAGS) $(OSTYPE)" + +exrecover: exrecover.o $(MALLOC) + $(CC) -o exrecover $(LDFLAGS) exrecover.o $(MALLOC) $(LDADD) + +expreserve: expreserve.o + $(CC) -o expreserve $(LDFLAGS) expreserve.o $(LDADD) + +ex_vars.h: ex_data.c + sh makeoptions $(CCFLAGS) + +uxre: + @cd libuxre && $(MAKE) CC="$(CC)" \ + COPT="$(CFLAGS) $(WARN) $(CPPFLAGS) $(OSTYPE)" + +clean: + @cd libterm && $(MAKE) clean + @test ! -d libuxre || (cd libuxre && $(MAKE) clean) +# If we dont have ex we cant make it so don't rm ex_vars.h + -rm -f ex exrecover expreserve *.o x*.[cs] core errs trace + +mrproper: clean + -rm -f log + +# install in standard place + +install-man: + test -d $(DESTDIR)$(PREFIX) || mkdir -p $(DESTDIR)$(PREFIX) + test -d $(DESTDIR)$(MANDIR) || mkdir -p $(DESTDIR)$(MANDIR) + test -d $(DESTDIR)$(MANDIR)/man1 || mkdir -p $(DESTDIR)$(MANDIR)/man1 + rm -f $(DESTDIR)$(MANDIR)/man1/ex.1 $(DESTDIR)$(MANDIR)/man1/edit.1 \ + $(DESTDIR)$(MANDIR)/man1/vedit.1 \ + $(DESTDIR)$(MANDIR)/man1/vi.1 \ + $(DESTDIR)$(MANDIR)/man1/view.1 + $(INSTALL) -c -m 644 ex.1 $(DESTDIR)$(MANDIR)/man1/ex.1 + $(INSTALL) -c -m 644 vi.1 $(DESTDIR)$(MANDIR)/man1/vi.1 + ln -s ex.1 $(DESTDIR)$(MANDIR)/man1/edit.1 + ln -s vi.1 $(DESTDIR)$(MANDIR)/man1/vedit.1 + ln -s vi.1 $(DESTDIR)$(MANDIR)/man1/view.1 + +install: all install-man + rm -f $(DESTDIR)$(BINDIR)/ex $(DESTDIR)$(BINDIR)/edit \ + $(DESTDIR)$(BINDIR)/vedit $(DESTDIR)$(BINDIR)/vi \ + $(DESTDIR)$(BINDIR)/view + test -d $(DESTDIR)$(BINDIR) || mkdir -p $(DESTDIR)$(BINDIR) +# special provisions for sticky install + if test -f $(DESTDIR)$(BINDIR)/ex; \ + then test -f $(DESTDIR)$(BINDIR)/ex.old.$$$$ && exit 1; \ + chmod 755 $(DESTDIR)$(BINDIR)/ex; \ + echo q | $(DESTDIR)$(BINDIR)/ex; \ + mv $(DESTDIR)$(BINDIR)/ex $(DESTDIR)$(BINDIR)/ex.old.$$$$; \ + rm -f $(DESTDIR)$(BINDIR)/ex.old.$$$$; \ + fi + $(INSTALL) -c $(STRIP) -m 1755 ex $(DESTDIR)$(BINDIR)/ex + test -d $(DESTDIR)$(LIBEXECDIR) || mkdir -p $(DESTDIR)$(LIBEXECDIR) + $(INSTALL) -c $(STRIP) exrecover $(DESTDIR)$(LIBEXECDIR)/exrecover + $(INSTALL) -c $(STRIP) expreserve $(DESTDIR)$(LIBEXECDIR)/expreserve + ln -s ex $(DESTDIR)$(BINDIR)/edit + ln -s ex $(DESTDIR)$(BINDIR)/vedit + ln -s ex $(DESTDIR)$(BINDIR)/vi + ln -s ex $(DESTDIR)$(BINDIR)/view + test -d $(DESTDIR)$(PRESERVEDIR) || mkdir -p $(DESTDIR)$(PRESERVEDIR) + chmod 1777 $(DESTDIR)$(PRESERVEDIR) + +ex.o: config.h ex_argv.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h +ex.o: ex_vars.h libterm/libterm.h +ex_addr.o: config.h ex.h ex_proto.h ex_re.h ex_tune.h ex_vars.h +ex_cmds.o: config.h ex_argv.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h +ex_cmds.o: ex_vars.h ex_vis.h libterm/libterm.h +ex_cmds2.o: config.h ex_argv.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h +ex_cmds2.o: ex_vars.h ex_vis.h libterm/libterm.h +ex_cmdsub.o: config.h ex_argv.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h +ex_cmdsub.o: ex_vars.h ex_vis.h libterm/libterm.h +ex_data.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h +ex_data.o: libterm/libterm.h +ex_extern.o: config.h ex_argv.h ex.h ex_proto.h ex_re.h ex_temp.h ex_tty.h +ex_extern.o: ex_tune.h ex_vars.h ex_vis.h libterm/libterm.h +ex_get.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h +ex_get.o: libterm/libterm.h +ex_io.o: config.h ex_argv.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h +ex_io.o: ex_vars.h ex_vis.h libterm/libterm.h +ex_put.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_put.o: libterm/libterm.h +ex_re.o: config.h ex.h ex_proto.h ex_re.h ex_tune.h ex_vars.h +ex_set.o: config.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h ex_vars.h +ex_set.o: libterm/libterm.h +ex_subr.o: config.h ex.h ex_proto.h ex_re.h ex_tty.h ex_tune.h ex_vars.h +ex_subr.o: ex_vis.h libterm/libterm.h +ex_tagio.o: config.h ex.h ex_proto.h ex_tune.h ex_vars.h +ex_temp.o: config.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h ex_vars.h +ex_temp.o: ex_vis.h libterm/libterm.h +ex_tty.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h +ex_tty.o: libterm/libterm.h +ex_unix.o: config.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h ex_vars.h +ex_unix.o: ex_vis.h libterm/libterm.h +ex_v.o: config.h ex.h ex_proto.h ex_re.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_v.o: libterm/libterm.h +ex_vadj.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vadj.o: libterm/libterm.h +ex_vget.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vget.o: libterm/libterm.h +ex_vmain.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vmain.o: libterm/libterm.h +ex_voper.o: config.h ex.h ex_proto.h ex_re.h ex_tty.h ex_tune.h ex_vars.h +ex_voper.o: ex_vis.h libterm/libterm.h +ex_vops.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vops.o: libterm/libterm.h +ex_vops2.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vops2.o: libterm/libterm.h +ex_vops3.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vops3.o: libterm/libterm.h +ex_vput.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vput.o: libterm/libterm.h +ex_vwind.o: config.h ex.h ex_proto.h ex_tty.h ex_tune.h ex_vars.h ex_vis.h +ex_vwind.o: libterm/libterm.h +expreserve.o: config.h +exrecover.o: config.h ex.h ex_proto.h ex_temp.h ex_tty.h ex_tune.h ex_vars.h +exrecover.o: libterm/libterm.h +malloc.o: config.h +mapmalloc.o: config.h +printf.o: config.h |