# Makefile.in generated by automake 1.11.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- Mode: Makefile -*- # # Makefile.am - automake file for Raptor docs # # Copyright (C) 2000-2010, David Beckett http://www.dajobe.org/ # Copyright (C) 2000-2005, University of Bristol, UK http://www.bristol.ac.uk/ # # This package is Free Software and part of Redland http://librdf.org/ # # It is licensed under the following three licenses as alternatives: # 1. GNU Lesser General Public License (LGPL) V2.1 or any newer version # 2. GNU General Public License (GPL) V2 or any newer version # 3. Apache License, V2.0 or any newer version # # You may not use this file except in compliance with at least one of # the above three licenses. # # See LICENSE.html or LICENSE.txt at the top of this package for the # complete terms and further detail along with the license texts for # the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively. # # # -*- mode: makefile -*- #################################### # Everything below here is generic # #################################### VPATH = @srcdir@ am__make_dryrun = \ { \ am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ *) \ for am__flg in $$MAKEFLAGS; do \ case $$am__flg in \ *=*|--*) ;; \ *n*) am__dry=yes; break;; \ esac; \ done;; \ esac; \ test $$am__dry = yes; \ } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make subdir = docs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/src/raptor_config.h CONFIG_CLEAN_FILES = version.xml CONFIG_CLEAN_VPATH_FILES = AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man3dir = $(mandir)/man3 am__installdirs = "$(DESTDIR)$(man3dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CURL_CONFIG = @CURL_CONFIG@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MEM = @MEM@ MEM_LIBS = @MEM_LIBS@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@ RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@ RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@ RAPTOR_PARSERS = @RAPTOR_PARSERS@ RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@ RAPTOR_VERSION = @RAPTOR_VERSION@ RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@ RAPTOR_VERSION_MAJOR = @RAPTOR_VERSION_MAJOR@ RAPTOR_VERSION_MINOR = @RAPTOR_VERSION_MINOR@ RAPTOR_VERSION_RELEASE = @RAPTOR_VERSION_RELEASE@ RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@ RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@ RECHO = @RECHO@ RECHO_C = @RECHO_C@ RECHO_N = @RECHO_N@ RPM_RELEASE = @RPM_RELEASE@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TAR = @TAR@ VERSION = @VERSION@ XML_CONFIG = @XML_CONFIG@ XSLT_CONFIG = @XSLT_CONFIG@ YACC = @YACC@ YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # The name of the module. DOC_MODULE = raptor2 # The top-level SGML file. DOC_MAIN_SGML_FILE = raptor-docs.xml # Extra options to supply to gtkdoc-scan SCAN_OPTIONS = --deprecated-guards="RAPTOR_DISABLE_DEPRECATED" # The directory containing the source code. Relative to $(srcdir) DOC_SOURCE_DIR = ../src # Used for dependencies HFILE_GLOB = $(builddir)/raptor-fake.h CFILE_GLOB = $(top_srcdir)/src/raptor_*.c IGNORE_CFILES = \ n3_lexer.c \ n3_parser.c \ raptor_nfc_test.c \ raptor_rss_common.c \ raptor_xsd.c \ turtle_lexer.c \ turtle_parser.c \ turtle_common.c \ parsedate.c \ strcasecmp.c # Use fixed version of raptor2.h EXTRA_HFILES = $(builddir)/raptor-fake.h # Headers to ignore: yes raptor2.h is intended to be in this list # since it is added as a fixed file raptor-fake.h by EXTRA_HFILES above IGNORE_HFILES = \ n3_common.h \ n3_lexer.h \ n3_parser.h \ parsedate.h \ raptor.h \ raptor2.h \ raptor_config.h \ raptor_internal.h \ raptor_nfc.h \ raptor_rss.h \ turtle_common.h \ turtle_lexer.h \ turtle_parser.h \ win32_raptor_config.h \ git-version.h # CFLAGS and LDFLAGS for compiling scan program. Only needed # if $(DOC_MODULE).types is non-empty. AM_CPPFLAGS = GTKDOC_LIBS = # Extra options to supply to gtkdoc-mkdb MKDB_OPTIONS = --sgml-mode --output-format=xml --ignore-files="$(IGNORE_CFILES)" # Extra options to supply to gtkdoc-mktmpl MKTMPL_OPTIONS = # Non-autogenerated (XML, other) files to be included in $(DOC_MAIN_SGML_FILE) content_files = \ raptor-changes.xml \ raptor-formats.xml \ raptor-parsers.xml \ raptor-serializers.xml \ raptor-tutorial-intro.xml \ raptor-tutorial-querying-functionality.xml \ raptor-tutorial-parsing.xml \ raptor-tutorial-serializing.xml \ version.xml \ rdfprint.c \ rdfcat.c \ rdfserialize.c # Images to copy into HTML directory HTML_IMAGES = # Extra options to supply to gtkdoc-fixref FIXXREF_OPTIONS = # gtkdoc might not define this DISTCLEANFILES = raptor-fake.h @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute # We set GPATH here; this gives us semantics for GNU make # which are more like other make's VPATH, when it comes to # whether a source that is a target of one rule is then # searched for in VPATH/GPATH. # GPATH = $(srcdir) TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) SETUP_FILES = \ $(content_files) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) libraptor2.html \ raptor1-eol.html $(man_MANS) version.xml.in upgrade-script.pl DOC_STAMPS = setup-build.stamp scan-build.stamp tmpl-build.stamp sgml-build.stamp \ html-build.stamp pdf-build.stamp \ tmpl.stamp sgml.stamp html.stamp pdf.stamp SCANOBJ_FILES = \ $(DOC_MODULE).args \ $(DOC_MODULE).hierarchy \ $(DOC_MODULE).interfaces \ $(DOC_MODULE).prerequisites \ $(DOC_MODULE).signals REPORT_FILES = \ $(DOC_MODULE)-undocumented.txt \ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp man_MANS = libraptor2.3 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu docs/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/gtk-doc.make: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man3: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(man_MANS)'; \ test -n "$(man3dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.3[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ done; } uninstall-man3: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man3dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.3[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am check: check-am all-am: Makefile $(MANS) all-local installdirs: for dir in "$(DESTDIR)$(man3dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-local dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man3 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-local uninstall-man uninstall-man: uninstall-man3 .MAKE: install-am install-strip .PHONY: all all-am all-local check check-am clean clean-generic \ clean-libtool clean-local dist-hook distclean \ distclean-generic distclean-libtool distclean-local distdir \ dvi dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-man3 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ maintainer-clean-local mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ uninstall-local uninstall-man uninstall-man3 @ENABLE_GTK_DOC_TRUE@all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) @ENABLE_GTK_DOC_FALSE@all-local: docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) $(REPORT_FILES): sgml-build.stamp #### setup #### setup-build.stamp: -@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ echo ' DOC Preparing build'; \ files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ test -f $(abs_srcdir)/$$file && \ cp -pu $(abs_srcdir)/$$file $(abs_builddir)/ || true; \ done; \ fi; \ test -d $(abs_srcdir)/tmpl && \ { cp -rp $(abs_srcdir)/tmpl $(abs_builddir)/; \ chmod -R u+w $(abs_builddir)/tmpl; } \ fi @touch setup-build.stamp #### scan #### scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB) @echo ' DOC Scanning header files' @_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES) @if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \ echo " DOC Introspecting gobjects"; \ scanobj_options=""; \ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ scanobj_options="--verbose"; \ fi; \ fi; \ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \ else \ for i in $(SCANOBJ_FILES) ; do \ test -f $$i || touch $$i ; \ done \ fi @touch scan-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true #### templates #### tmpl-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt @echo ' DOC Rebuilding template files' @gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS) @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ if test -w $(abs_srcdir) ; then \ cp -rp $(abs_builddir)/tmpl $(abs_srcdir)/; \ fi \ fi @touch tmpl-build.stamp tmpl.stamp: tmpl-build.stamp @true $(srcdir)/tmpl/*.sgml: @true #### xml #### sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files) @echo ' DOC Building XML' @-chmod -R u+w $(srcdir) @_source_dir='' ; \ for i in $(DOC_SOURCE_DIR) ; do \ _source_dir="$${_source_dir} --source-dir=$$i" ; \ done ; \ gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS) @touch sgml-build.stamp sgml.stamp: sgml-build.stamp @true #### html #### html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) @echo ' DOC Building HTML' @rm -rf html @mkdir html @mkhtml_options=""; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkhtml_options="$$mkhtml_options --verbose"; \ fi; \ fi; \ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \ if test "$(?)" = "0"; then \ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \ fi; \ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) -@test "x$(HTML_IMAGES)" = "x" || \ for file in $(HTML_IMAGES) ; do \ if test -f $(abs_srcdir)/$$file ; then \ cp $(abs_srcdir)/$$file $(abs_builddir)/html; \ fi; \ if test -f $(abs_builddir)/$$file ; then \ cp $(abs_builddir)/$$file $(abs_builddir)/html; \ fi; \ done; @echo ' DOC Fixing cross-references' @gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) @touch html-build.stamp #### pdf #### pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) @echo ' DOC Building PDF' @rm -f $(DOC_MODULE).pdf @mkpdf_options=""; \ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \ if test "$(?)" = "0"; then \ if test "x$(V)" = "x1"; then \ mkpdf_options="$$mkpdf_options --verbose"; \ fi; \ fi; \ if test "x$(HTML_IMAGES)" != "x"; then \ for img in $(HTML_IMAGES); do \ part=`dirname $$img`; \ echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \ if test $$? != 0; then \ mkpdf_options="$$mkpdf_options --imgdir=$$part"; \ fi; \ done; \ fi; \ gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS) @touch pdf-build.stamp ############## clean-local: @rm -f *~ *.bak @rm -rf .libs distclean-local: @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \ rm -rf tmpl; \ fi maintainer-clean-local: clean @rm -rf xml html install-data-local: @installfiles=`echo $(builddir)/html/*`; \ if test "$$installfiles" = '$(builddir)/html/*'; \ then echo 1>&2 'Nothing to install' ; \ else \ if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ $(mkinstalldirs) $${installdir} ; \ for i in $$installfiles; do \ echo ' $(INSTALL_DATA) '$$i ; \ $(INSTALL_DATA) $$i $${installdir}; \ done; \ if test -n "$(DOC_MODULE_VERSION)"; then \ mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ fi; \ $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \ fi uninstall-local: @if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ rm -rf $${installdir} # # Require gtk-doc when making dist # @ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc: @ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc: @ENABLE_GTK_DOC_FALSE@ @echo "*** gtk-doc must be installed and enabled in order to make dist" @ENABLE_GTK_DOC_FALSE@ @false dist-hook: dist-check-gtkdoc dist-hook-local @mkdir $(distdir)/tmpl @mkdir $(distdir)/html @-cp ./tmpl/*.sgml $(distdir)/tmpl @cp ./html/* $(distdir)/html @-cp ./$(DOC_MODULE).pdf $(distdir)/ @-cp ./$(DOC_MODULE).types $(distdir)/ @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/ @cd $(distdir) && rm -f $(DISTCLEANFILES) @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html .PHONY : dist-hook-local docs raptor-fake.h: $(top_builddir)/src/raptor2.h $(top_srcdir)/scripts/fix-gtkdoc-header.pl $(PERL) $(top_srcdir)/scripts/fix-gtkdoc-header.pl < $< > $@ @MAINTAINER_MODE_TRUE@libraptor2.html: $(srcdir)/libraptor2.3 $(top_srcdir)/scripts/fix-groff-xhtml @MAINTAINER_MODE_TRUE@ -groff -man -Thtml -P-l $< | tidy -asxml -wrap 1000 2>/dev/null | $(PERL) $(top_srcdir)/scripts/fix-groff-xhtml $@ @MAINTAINER_MODE_TRUE@rdfcat.c: $(top_srcdir)/examples/rdfcat.c @MAINTAINER_MODE_TRUE@ $(install_sh_DATA) $? $@ @MAINTAINER_MODE_TRUE@rdfprint.c: $(top_srcdir)/examples/rdfprint.c @MAINTAINER_MODE_TRUE@ $(install_sh_DATA) $? $@ @MAINTAINER_MODE_TRUE@rdfserialize.c: $(top_srcdir)/examples/rdfserialize.c @MAINTAINER_MODE_TRUE@ $(install_sh_DATA) $? $@ @MAINTAINER_MODE_TRUE@raptor-tutorial-parsing.xml: rdfcat.c @MAINTAINER_MODE_TRUE@raptor-tutorial-serializing.xml: rdfprint.c rdfserialize.c @MAINTAINER_MODE_TRUE@raptor-changes.xml: $(srcdir)/raptor-1-to-2-map.tsv $(top_srcdir)/scripts/process-changes.pl @MAINTAINER_MODE_TRUE@ $(PERL) $(top_srcdir)/scripts/process-changes.pl --docbook-xml $@ $(PACKAGE) $(srcdir)/raptor-1-to-2-map.tsv @MAINTAINER_MODE_TRUE@raptor-formats.xml: $(top_builddir)/scripts/build-formats @MAINTAINER_MODE_TRUE@ $(top_builddir)/scripts/build-formats > $@ @MAINTAINER_MODE_TRUE@$(top_builddir)/scripts/build-formats: @MAINTAINER_MODE_TRUE@ cd $(top_builddir)/scripts && $(MAKE) build-formats @MAINTAINER_MODE_TRUE@upgrade-script.pl: $(top_srcdir)/scripts/process-changes.pl $(srcdir)/raptor-1-to-2-map.tsv @MAINTAINER_MODE_TRUE@ $(PERL) $(top_srcdir)/scripts/process-changes.pl --upgrade-script $@ $(PACKAGE) $(srcdir)/raptor-1-to-2-map.tsv dist-hook-local: docs # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: