diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 171 |
1 files changed, 132 insertions, 39 deletions
@@ -326,7 +326,7 @@ seccomp="" glusterfs="" glusterfs_discard="no" glusterfs_zerofill="no" -virtio_blk_data_plane="" +archipelago="" gtk="" gtkabi="" vte="" @@ -388,6 +388,7 @@ cpp="${CPP-$cc -E}" objcopy="${OBJCOPY-${cross_prefix}objcopy}" ld="${LD-${cross_prefix}ld}" libtool="${LIBTOOL-${cross_prefix}libtool}" +nm="${NM-${cross_prefix}nm}" strip="${STRIP-${cross_prefix}strip}" windres="${WINDRES-${cross_prefix}windres}" pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}" @@ -1087,9 +1088,12 @@ for opt do ;; --enable-glusterfs) glusterfs="yes" ;; - --disable-virtio-blk-data-plane) virtio_blk_data_plane="no" + --disable-archipelago) archipelago="no" ;; - --enable-virtio-blk-data-plane) virtio_blk_data_plane="yes" + --enable-archipelago) archipelago="yes" + ;; + --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane) + echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2 ;; --disable-gtk) gtk="no" ;; @@ -1344,7 +1348,7 @@ Advanced options (experts only): --enable-linux-aio enable Linux AIO support --disable-cap-ng disable libcap-ng support --enable-cap-ng enable libcap-ng support - --disable-attr disables attr and xattr support + --disable-attr disable attr and xattr support --enable-attr enable attr and xattr support --disable-blobs disable installing provided firmware blobs --enable-docs enable documentation build @@ -1375,20 +1379,22 @@ Advanced options (experts only): --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb) --disable-seccomp disable seccomp support - --enable-seccomp enables seccomp support + --enable-seccomp enable seccomp support --with-coroutine=BACKEND coroutine backend. Supported options: gthread, ucontext, sigaltstack, windows --disable-coroutine-pool disable coroutine freelist (worse performance) --enable-coroutine-pool enable coroutine freelist (better performance) --enable-glusterfs enable GlusterFS backend --disable-glusterfs disable GlusterFS backend + --enable-archipelago enable Archipelago backend + --disable-archipelago disable Archipelago backend --enable-gcov enable test coverage analysis with gcov --gcov=GCOV use specified gcov [$gcov_tool] --disable-tpm disable TPM support --enable-tpm enable TPM support --disable-libssh2 disable ssh block device support --enable-libssh2 enable ssh block device support - --disable-vhdx disables support for the Microsoft VHDX image format + --disable-vhdx disable support for the Microsoft VHDX image format --enable-vhdx enable support for the Microsoft VHDX image format --disable-quorum disable quorum block filter support --enable-quorum enable quorum block filter support @@ -1723,6 +1729,7 @@ fi cat > $TMPC <<EOF #include <sys/socket.h> +#include <linux/ip.h> int main(void) { return sizeof(struct mmsghdr); } EOF if compile_prog "" "" ; then @@ -1816,7 +1823,8 @@ fi # libseccomp check if test "$seccomp" != "no" ; then - if $pkg_config --atleast-version=2.1.0 libseccomp; then + if test "$cpu" = "i386" || test "$cpu" = "x86_64" && + $pkg_config --atleast-version=2.1.1 libseccomp; then libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`" QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`" seccomp="yes" @@ -2708,6 +2716,12 @@ for i in $glib_modules; do fi done +# g_test_trap_subprocess added in 2.38. Used by some tests. +glib_subprocess=yes +if ! $pkg_config --atleast-version=2.38 glib-2.0; then + glib_subprocess=no +fi + ########################################## # SHA command probe for modules if test "$modules" = yes; then @@ -2729,7 +2743,7 @@ fi if test "$pixman" = ""; then if test "$want_tools" = "no" -a "$softmmu" = "no"; then pixman="none" - elif $pkg_config pixman-1 > /dev/null 2>&1; then + elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then pixman="system" else pixman="internal" @@ -2745,11 +2759,12 @@ if test "$pixman" = "none"; then pixman_cflags= pixman_libs= elif test "$pixman" = "system"; then + # pixman version has been checked above pixman_cflags=`$pkg_config --cflags pixman-1` pixman_libs=`$pkg_config --libs pixman-1` else if test ! -d ${source_path}/pixman/pixman; then - error_exit "pixman not present. Your options:" \ + error_exit "pixman >= 0.21.8 not present. Your options:" \ " (1) Preferred: Install the pixman devel package (any recent" \ " distro should have packages as Xorg needs pixman too)." \ " (2) Fetch the pixman submodule, using:" \ @@ -2928,16 +2943,6 @@ else fi ########################################## -# adjust virtio-blk-data-plane based on linux-aio - -if test "$virtio_blk_data_plane" = "yes" -a \ - "$linux_aio" != "yes" ; then - error_exit "virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio" -elif test -z "$virtio_blk_data_plane" ; then - virtio_blk_data_plane=$linux_aio -fi - -########################################## # attr probe if test "$attr" != "no" ; then @@ -3071,6 +3076,33 @@ EOF fi fi + +########################################## +# archipelago probe +if test "$archipelago" != "no" ; then + cat > $TMPC <<EOF +#include <stdio.h> +#include <xseg/xseg.h> +#include <xseg/protocol.h> +int main(void) { + xseg_initialize(); + return 0; +} +EOF + archipelago_libs=-lxseg + if compile_prog "" "$archipelago_libs"; then + archipelago="yes" + libs_tools="$archipelago_libs $libs_tools" + libs_softmmu="$archipelago_libs $libs_softmmu" + else + if test "$archipelago" = "yes" ; then + feature_not_found "Archipelago backend support" "Install libxseg devel" + fi + archipelago="no" + fi +fi + + ########################################## # glusterfs probe if test "$glusterfs" != "no" ; then @@ -3086,7 +3118,8 @@ if test "$glusterfs" != "no" ; then fi else if test "$glusterfs" = "yes" ; then - feature_not_found "GlusterFS backend support" "Install glusterfs-api devel" + feature_not_found "GlusterFS backend support" \ + "Install glusterfs-api devel >= 3" fi glusterfs="no" fi @@ -3276,6 +3309,21 @@ if compile_prog "" "" ; then fallocate_punch_hole=yes fi +# check for posix_fallocate +posix_fallocate=no +cat > $TMPC << EOF +#include <fcntl.h> + +int main(void) +{ + posix_fallocate(0, 0, 0); + return 0; +} +EOF +if compile_prog "" "" ; then + posix_fallocate=yes +fi + # check for sync_file_range sync_file_range=no cat > $TMPC << EOF @@ -3420,6 +3468,37 @@ if compile_prog "" "" ; then sendfile=yes fi +# check for timerfd support (glibc 2.8 and newer) +timerfd=no +cat > $TMPC << EOF +#include <sys/timerfd.h> + +int main(void) +{ + return(timerfd_create(CLOCK_REALTIME, 0)); +} +EOF +if compile_prog "" "" ; then + timerfd=yes +fi + +# check for setns and unshare support +setns=no +cat > $TMPC << EOF +#include <sched.h> + +int main(void) +{ + int ret; + ret = setns(0, 0); + ret = unshare(0); + return ret; +} +EOF +if compile_prog "" "" ; then + setns=yes +fi + # Check if tools are available to build documentation. if test "$docs" != "no" ; then if has makeinfo && has pod2man; then @@ -3531,7 +3610,8 @@ EOF spice_server_version=$($pkg_config --modversion spice-server) else if test "$spice" = "yes" ; then - feature_not_found "spice" "Install spice-server and spice-protocol devel" + feature_not_found "spice" \ + "Install spice-server(>=0.12.0) and spice-protocol(>=0.12.3) devel" fi spice="no" fi @@ -3562,7 +3642,7 @@ EOF smartcard_nss="yes" else if test "$smartcard_nss" = "yes"; then - feature_not_found "nss" + feature_not_found "nss" "Install nss devel >= 3.12.8" fi smartcard_nss="no" fi @@ -3578,7 +3658,7 @@ if test "$libusb" != "no" ; then libs_softmmu="$libs_softmmu $libusb_libs" else if test "$libusb" = "yes"; then - feature_not_found "libusb" "Install libusb devel" + feature_not_found "libusb" "Install libusb devel >= 1.0.13" fi libusb="no" fi @@ -3892,12 +3972,11 @@ else fi ######################################## -# check if we have valgrind/valgrind.h and valgrind/memcheck.h +# check if we have valgrind/valgrind.h valgrind_h=no cat > $TMPC << EOF #include <valgrind/valgrind.h> -#include <valgrind/memcheck.h> int main(void) { return 0; } @@ -4003,7 +4082,7 @@ if test "$libnfs" != "no" ; then LIBS="$LIBS $libnfs_libs" else if test "$libnfs" = "yes" ; then - feature_not_found "libnfs" + feature_not_found "libnfs" "Install libnfs devel >= 1.9.3" fi libnfs="no" fi @@ -4133,9 +4212,9 @@ EOF fi fi -# add pixman flags after all config tests are done -QEMU_CFLAGS="$QEMU_CFLAGS $pixman_cflags $fdt_cflags" -libs_softmmu="$libs_softmmu $pixman_libs" +# prepend pixman and ftd flags after all config tests are done +QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS" +libs_softmmu="$pixman_libs $libs_softmmu" echo "Install prefix $prefix" echo "BIOS directory `eval echo $qemu_datadir`" @@ -4250,7 +4329,7 @@ echo "seccomp support $seccomp" echo "coroutine backend $coroutine" echo "coroutine pool $coroutine_pool" echo "GlusterFS support $glusterfs" -echo "virtio-blk-data-plane $virtio_blk_data_plane" +echo "Archipelago support $archipelago" echo "gcov $gcov_tool" echo "gcov enabled $gcov" echo "TPM support $tpm" @@ -4459,6 +4538,9 @@ fi if test "$fallocate_punch_hole" = "yes" ; then echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak fi +if test "$posix_fallocate" = "yes" ; then + echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak +fi if test "$sync_file_range" = "yes" ; then echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak fi @@ -4486,6 +4568,12 @@ fi if test "$sendfile" = "yes" ; then echo "CONFIG_SENDFILE=y" >> $config_host_mak fi +if test "$timerfd" = "yes" ; then + echo "CONFIG_TIMERFD=y" >> $config_host_mak +fi +if test "$setns" = "yes" ; then + echo "CONFIG_SETNS=y" >> $config_host_mak +fi if test "$inotify" = "yes" ; then echo "CONFIG_INOTIFY=y" >> $config_host_mak fi @@ -4510,6 +4598,9 @@ if test "$bluez" = "yes" ; then echo "CONFIG_BLUEZ=y" >> $config_host_mak echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak fi +if test "glib_subprocess" = "yes" ; then + echo "CONFIG_HAS_GLIB_SUBPROCESS_TESTS=y" >> $config_host_mak +fi echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak if test "$gtk" = "yes" ; then echo "CONFIG_GTK=y" >> $config_host_mak @@ -4688,6 +4779,11 @@ if test "$glusterfs_zerofill" = "yes" ; then echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak fi +if test "$archipelago" = "yes" ; then + echo "CONFIG_ARCHIPELAGO=m" >> $config_host_mak + echo "ARCHIPELAGO_LIBS=$archipelago_libs" >> $config_host_mak +fi + if test "$libssh2" = "yes" ; then echo "CONFIG_LIBSSH2=m" >> $config_host_mak echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak @@ -4698,10 +4794,6 @@ if test "$quorum" = "yes" ; then echo "CONFIG_QUORUM=y" >> $config_host_mak fi -if test "$virtio_blk_data_plane" = "yes" ; then - echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak -fi - if test "$vhdx" = "yes" ; then echo "CONFIG_VHDX=y" >> $config_host_mak fi @@ -4808,6 +4900,7 @@ echo "AS=$as" >> $config_host_mak echo "CPP=$cpp" >> $config_host_mak echo "OBJCOPY=$objcopy" >> $config_host_mak echo "LD=$ld" >> $config_host_mak +echo "NM=$nm" >> $config_host_mak echo "WINDRES=$windres" >> $config_host_mak echo "LIBTOOL=$libtool" >> $config_host_mak echo "CFLAGS=$CFLAGS" >> $config_host_mak @@ -4816,6 +4909,7 @@ echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak if test "$sparse" = "yes" ; then echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak + echo "CXX := REAL_CC=\"\$(CXX)\" cgcc" >> $config_host_mak echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak fi @@ -4936,7 +5030,7 @@ case "$target_name" in aarch64) TARGET_BASE_ARCH=arm bflt="yes" - gdb_xml_files="aarch64-core.xml aarch64-fpu.xml" + gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" ;; cris) ;; @@ -4965,6 +5059,8 @@ case "$target_name" in TARGET_BASE_ARCH=mips echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak ;; + tricore) + ;; moxie) ;; or32) @@ -5013,6 +5109,7 @@ case "$target_name" in echo "TARGET_ABI32=y" >> $config_target_mak ;; s390x) + gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml" ;; unicore32) ;; @@ -5292,10 +5389,6 @@ for rom in seabios vgabios ; do echo "LD=$ld" >> $config_mak done -if test "$docs" = "yes" ; then - mkdir -p QMP -fi - # set up qemu-iotests in this build directory iotests_common_env="tests/qemu-iotests/common.env" iotests_check="tests/qemu-iotests/check" |