Imported Upstream version 3.7.3

Change-Id: I340c8ed6916f5312452a0b7b1bf0f0b7a2d91264
Signed-off-by: DongHun Kwak <dh0128.kwak@samsung.com>

1 files changed, 533 insertions, 533 deletions

diff --git a/aclocal.m4 b/aclocal.m4
index 9bc175c..db21f54 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -20,539 +20,6 @@ You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# Configure paths for GLIB
-# Owen Taylor     1997-2001
-
-dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject,
-dnl gthread, or gio is specified in MODULES, pass to pkg-config
-dnl
-AC_DEFUN([AM_PATH_GLIB_2_0],
-[dnl 
-dnl Get the cflags and libraries from pkg-config
-dnl
-AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
-		    , enable_glibtest=yes)
-
-  pkg_config_args=glib-2.0
-  for module in . $4
-  do
-      case "$module" in
-         gmodule) 
-             pkg_config_args="$pkg_config_args gmodule-2.0"
-         ;;
-         gmodule-no-export) 
-             pkg_config_args="$pkg_config_args gmodule-no-export-2.0"
-         ;;
-         gobject) 
-             pkg_config_args="$pkg_config_args gobject-2.0"
-         ;;
-         gthread) 
-             pkg_config_args="$pkg_config_args gthread-2.0"
-         ;;
-         gio*) 
-             pkg_config_args="$pkg_config_args $module-2.0"
-         ;;
-      esac
-  done
-
-  PKG_PROG_PKG_CONFIG([0.16])
-
-  no_glib=""
-
-  if test "x$PKG_CONFIG" = x ; then
-    no_glib=yes
-    PKG_CONFIG=no
-  fi
-
-  min_glib_version=ifelse([$1], ,2.0.0,$1)
-  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-
-  if test x$PKG_CONFIG != xno ; then
-    ## don't try to run the test against uninstalled libtool libs
-    if $PKG_CONFIG --uninstalled $pkg_config_args; then
-	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
-	  enable_glibtest=no
-    fi
-
-    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
-	  :
-    else
-	  no_glib=yes
-    fi
-  fi
-
-  if test x"$no_glib" = x ; then
-    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
-    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
-    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
-    GLIB_COMPILE_RESOURCES=`$PKG_CONFIG --variable=glib_compile_resources gio-2.0`
-
-    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
-    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
-    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_glibtest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-      LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of pkg-config to some extent)
-dnl
-      rm -f conf.glibtest
-      AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int 
-main ()
-{
-  unsigned int major, minor, micro;
-  char *tmp_version;
-
-  fclose (fopen ("conf.glibtest", "w"));
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = g_strdup("$min_glib_version");
-  if (sscanf(tmp_version, "%u.%u.%u", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_glib_version");
-     exit(1);
-   }
-
-  if ((glib_major_version != $glib_config_major_version) ||
-      (glib_minor_version != $glib_config_minor_version) ||
-      (glib_micro_version != $glib_config_micro_version))
-    {
-      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-             glib_major_version, glib_minor_version, glib_micro_version);
-      printf ("*** was found! If pkg-config was correct, then it is best\n");
-      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
-      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-      printf("*** required on your system.\n");
-      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
-      printf("*** to point to the correct configuration files\n");
-    } 
-  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-           (glib_micro_version != GLIB_MICRO_VERSION))
-    {
-      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-      printf("*** library (version %d.%d.%d)\n",
-	     glib_major_version, glib_minor_version, glib_micro_version);
-    }
-  else
-    {
-      if ((glib_major_version > major) ||
-        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-      {
-        return 0;
-       }
-     else
-      {
-        printf("\n*** An old version of GLIB (%u.%u.%u) was found.\n",
-               glib_major_version, glib_minor_version, glib_micro_version);
-        printf("*** You need a version of GLIB newer than %u.%u.%u. The latest version of\n",
-	       major, minor, micro);
-        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-        printf("***\n");
-        printf("*** If you have already installed a sufficiently new version, this error\n");
-        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
-        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
-        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
-        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-        printf("*** so that the correct libraries are found at run-time))\n");
-      }
-    }
-  return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_glib" = x ; then
-     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$PKG_CONFIG" = "no" ; then
-       echo "*** A new enough version of pkg-config was not found."
-       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
-     else
-       if test -f conf.glibtest ; then
-        :
-       else
-          echo "*** Could not run GLIB test program, checking why..."
-          ac_save_CFLAGS="$CFLAGS"
-          ac_save_LIBS="$LIBS"
-          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-          LIBS="$LIBS $GLIB_LIBS"
-          AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means GLIB is incorrectly installed."])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     GLIB_CFLAGS=""
-     GLIB_LIBS=""
-     GLIB_GENMARSHAL=""
-     GOBJECT_QUERY=""
-     GLIB_MKENUMS=""
-     GLIB_COMPILE_RESOURCES=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(GLIB_CFLAGS)
-  AC_SUBST(GLIB_LIBS)
-  AC_SUBST(GLIB_GENMARSHAL)
-  AC_SUBST(GOBJECT_QUERY)
-  AC_SUBST(GLIB_MKENUMS)
-  AC_SUBST(GLIB_COMPILE_RESOURCES)
-  rm -f conf.glibtest
-])
-
-dnl GNOME_CODE_COVERAGE
-dnl
-dnl Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be
-dnl included in the CFLAGS and LIBS/LDFLAGS variables of every build target
-dnl (program or library) which should be built with code coverage support.
-dnl Also defines GNOME_CODE_COVERAGE_RULES which should be substituted in your
-dnl Makefile; and $enable_code_coverage which can be used in subsequent
-dnl configure output.
-dnl
-dnl Note that all optimisation flags in CFLAGS must be disabled when code
-dnl coverage is enabled.
-dnl
-dnl Derived from Makefile.decl in GLib, originally licenced under LGPLv2.1+.
-dnl This file is licenced under GPLv3. For the full gnome-common licence
-dnl (GPLv3), see the COPYING file.
-dnl
-dnl Usage example:
-dnl configure.ac:
-dnl    GNOME_CODE_COVERAGE
-dnl
-dnl Makefile.am:
-dnl    @GNOME_CODE_COVERAGE_RULES@
-dnl    my_program_LIBS = … $(CODE_COVERAGE_LDFLAGS) …
-dnl    my_program_CFLAGS = … $(CODE_COVERAGE_CFLAGS) …
-dnl
-dnl This results in a “check-code-coverage” rule being added to any Makefile.am
-dnl which includes “@GNOME_CODE_COVERAGE_RULES@” (assuming the module has been
-dnl configured with --enable-code-coverage). Running `make check-code-coverage`
-dnl in that directory will run the module’s test suite (`make check`) and build
-dnl a code coverage report detailing the code which was touched, then print the
-dnl URI for the report.
-
-AC_DEFUN([GNOME_CODE_COVERAGE],[
-	dnl Check for --enable-code-coverage
-	AC_MSG_CHECKING([whether to build with code coverage support])
-	AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no)
-	AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
-	AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
-	AC_MSG_RESULT($enable_code_coverage)
-
-	AS_IF([ test "$enable_code_coverage" = "yes" ], [
-		dnl Check if gcc is being used
-		AS_IF([ test "$GCC" = "no" ], [
-			AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
-		])
-
-		# List of supported lcov versions.
-		lcov_version_list="1.6 1.7 1.8 1.9"
-
-		AC_CHECK_PROG([LCOV], [lcov], [lcov])
-		AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
-
-		AS_IF([ test "$LCOV" ], [
-			AC_CACHE_CHECK([for lcov version], gnome_cv_lcov_version, [
-				gnome_cv_lcov_version=invalid
-				lcov_version=`$LCOV -v 2>/dev/null | $SED -e 's/^.* //'`
-				for lcov_check_version in $lcov_version_list; do
-					if test "$lcov_version" = "$lcov_check_version"; then
-						gnome_cv_lcov_version="$lcov_check_version (ok)"
-					fi
-				done
-			])
-		], [
-			lcov_msg="To enable code coverage reporting you must have one of the following lcov versions installed: $lcov_version_list"
-			AC_MSG_ERROR([$lcov_msg])
-		])
-
-		case $gnome_cv_lcov_version in
-			""|invalid[)]
-				lcov_msg="You must have one of the following versions of lcov: $lcov_version_list (found: $lcov_version)."
-				AC_MSG_ERROR([$lcov_msg])
-				LCOV="exit 0;"
-			;;
-		esac
-
-		AS_IF([ test -z "$GENHTML" ], [
-			AC_MSG_ERROR([Could not find genhtml from the lcov package])
-		])
-
-		dnl Build the code coverage flags
-		CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
-		CODE_COVERAGE_LDFLAGS="-lgcov"
-
-		AC_SUBST([CODE_COVERAGE_CFLAGS])
-		AC_SUBST([CODE_COVERAGE_LDFLAGS])
-	])
-
-GNOME_CODE_COVERAGE_RULES='
-# Code coverage
-#
-# Optional:
-#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
-#    (Default: $(top_builddir))
-#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
-#    by lcov for code coverage. (Default:
-#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
-#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
-#    reports to be created. (Default:
-#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
-#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance.
-#    (Default: empty)
-#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
-#    instance. (Default: empty)
-#
-# The generated report will be titled using the $(PACKAGE_NAME) and
-# $(PACKAGE_VERSION). In order to add the current git hash to the title,
-# use the git-version-gen script, available online.
-
-# Optional variables
-CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
-CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
-CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
-CODE_COVERAGE_LCOV_OPTIONS ?=
-CODE_COVERAGE_GENHTML_OPTIONS ?=
-
-# Use recursive makes in order to ignore errors during check
-check-code-coverage:
-ifdef CODE_COVERAGE_ENABLED
-	-$(MAKE) $(AM_MAKEFLAGS) -k check
-	$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
-else
-	@echo "Need to reconfigure with --enable-code-coverage"
-endif
-
-# Capture code coverage data
-code-coverage-capture: code-coverage-capture-hook
-ifdef CODE_COVERAGE_ENABLED
-	$(LCOV) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS)
-	$(LCOV) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" --output-file "$(CODE_COVERAGE_OUTPUT_FILE)"
-	-rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
-	LANG=C $(GENHTML) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
-	@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
-else
-	@echo "Need to reconfigure with --enable-code-coverage"
-endif
-
-# Hook rule executed before code-coverage-capture, overridable by the user
-code-coverage-capture-hook:
-
-clean: code-coverage-clean
-code-coverage-clean:
-	-$(LCOV) --directory $(top_builddir) -z
-	-rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
-	-find . -name "*.gcda" -o -name "*.gcov" -delete
-
-GITIGNOREFILES ?=
-GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
-
-DISTCHECK_CONFIGURE_FLAGS ?=
-DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
-
-.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
-'
-
-	AC_SUBST([GNOME_CODE_COVERAGE_RULES])
-	m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([GNOME_CODE_COVERAGE_RULES])])
-])
-
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=m4_default([$1], [0.9.0])
-	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_RESULT([no])
-		PKG_CONFIG=""
-	fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
-    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_default([$2], [:])
-m4_ifvaln([$3], [else
-  $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
-    pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
-    PKG_CHECK_EXISTS([$3],
-                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
-		      test "x$?" != "x0" && pkg_failed=yes ],
-		     [pkg_failed=yes])
- else
-    pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
-   	AC_MSG_RESULT([no])
-        _PKG_SHORT_ERRORS_SUPPORTED
-        if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
-        else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
-        fi
-	# Put the nasty error message in config.log where it belongs
-	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
-	m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])[]dnl
-        ])
-elif test $pkg_failed = untried; then
-     	AC_MSG_RESULT([no])
-	m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
-        ])
-else
-	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-        AC_MSG_RESULT([yes])
-	$3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
 # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
 # Foundation, Inc.
 #
@@ -1851,6 +1318,539 @@ AC_SUBST([am__tar])
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
+dnl GNOME_CODE_COVERAGE
+dnl
+dnl Defines CODE_COVERAGE_CFLAGS and CODE_COVERAGE_LDFLAGS which should be
+dnl included in the CFLAGS and LIBS/LDFLAGS variables of every build target
+dnl (program or library) which should be built with code coverage support.
+dnl Also defines GNOME_CODE_COVERAGE_RULES which should be substituted in your
+dnl Makefile; and $enable_code_coverage which can be used in subsequent
+dnl configure output.
+dnl
+dnl Note that all optimisation flags in CFLAGS must be disabled when code
+dnl coverage is enabled.
+dnl
+dnl Derived from Makefile.decl in GLib, originally licenced under LGPLv2.1+.
+dnl This file is licenced under GPLv3. For the full gnome-common licence
+dnl (GPLv3), see the COPYING file.
+dnl
+dnl Usage example:
+dnl configure.ac:
+dnl    GNOME_CODE_COVERAGE
+dnl
+dnl Makefile.am:
+dnl    @GNOME_CODE_COVERAGE_RULES@
+dnl    my_program_LIBS = … $(CODE_COVERAGE_LDFLAGS) …
+dnl    my_program_CFLAGS = … $(CODE_COVERAGE_CFLAGS) …
+dnl
+dnl This results in a “check-code-coverage” rule being added to any Makefile.am
+dnl which includes “@GNOME_CODE_COVERAGE_RULES@” (assuming the module has been
+dnl configured with --enable-code-coverage). Running `make check-code-coverage`
+dnl in that directory will run the module’s test suite (`make check`) and build
+dnl a code coverage report detailing the code which was touched, then print the
+dnl URI for the report.
+
+AC_DEFUN([GNOME_CODE_COVERAGE],[
+	dnl Check for --enable-code-coverage
+	AC_MSG_CHECKING([whether to build with code coverage support])
+	AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no)
+	AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
+	AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
+	AC_MSG_RESULT($enable_code_coverage)
+
+	AS_IF([ test "$enable_code_coverage" = "yes" ], [
+		dnl Check if gcc is being used
+		AS_IF([ test "$GCC" = "no" ], [
+			AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
+		])
+
+		# List of supported lcov versions.
+		lcov_version_list="1.6 1.7 1.8 1.9"
+
+		AC_CHECK_PROG([LCOV], [lcov], [lcov])
+		AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
+
+		AS_IF([ test "$LCOV" ], [
+			AC_CACHE_CHECK([for lcov version], gnome_cv_lcov_version, [
+				gnome_cv_lcov_version=invalid
+				lcov_version=`$LCOV -v 2>/dev/null | $SED -e 's/^.* //'`
+				for lcov_check_version in $lcov_version_list; do
+					if test "$lcov_version" = "$lcov_check_version"; then
+						gnome_cv_lcov_version="$lcov_check_version (ok)"
+					fi
+				done
+			])
+		], [
+			lcov_msg="To enable code coverage reporting you must have one of the following lcov versions installed: $lcov_version_list"
+			AC_MSG_ERROR([$lcov_msg])
+		])
+
+		case $gnome_cv_lcov_version in
+			""|invalid[)]
+				lcov_msg="You must have one of the following versions of lcov: $lcov_version_list (found: $lcov_version)."
+				AC_MSG_ERROR([$lcov_msg])
+				LCOV="exit 0;"
+			;;
+		esac
+
+		AS_IF([ test -z "$GENHTML" ], [
+			AC_MSG_ERROR([Could not find genhtml from the lcov package])
+		])
+
+		dnl Build the code coverage flags
+		CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+		CODE_COVERAGE_LDFLAGS="-lgcov"
+
+		AC_SUBST([CODE_COVERAGE_CFLAGS])
+		AC_SUBST([CODE_COVERAGE_LDFLAGS])
+	])
+
+GNOME_CODE_COVERAGE_RULES='
+# Code coverage
+#
+# Optional:
+#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
+#    (Default: $(top_builddir))
+#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
+#    by lcov for code coverage. (Default:
+#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
+#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
+#    reports to be created. (Default:
+#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
+#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the lcov instance.
+#    (Default: empty)
+#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
+#    instance. (Default: empty)
+#
+# The generated report will be titled using the $(PACKAGE_NAME) and
+# $(PACKAGE_VERSION). In order to add the current git hash to the title,
+# use the git-version-gen script, available online.
+
+# Optional variables
+CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
+CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
+CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
+CODE_COVERAGE_LCOV_OPTIONS ?=
+CODE_COVERAGE_GENHTML_OPTIONS ?=
+
+# Use recursive makes in order to ignore errors during check
+check-code-coverage:
+ifdef CODE_COVERAGE_ENABLED
+	-$(MAKE) $(AM_MAKEFLAGS) -k check
+	$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
+else
+	@echo "Need to reconfigure with --enable-code-coverage"
+endif
+
+# Capture code coverage data
+code-coverage-capture: code-coverage-capture-hook
+ifdef CODE_COVERAGE_ENABLED
+	$(LCOV) --directory $(CODE_COVERAGE_DIRECTORY) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_OPTIONS)
+	$(LCOV) --directory $(CODE_COVERAGE_DIRECTORY) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" --output-file "$(CODE_COVERAGE_OUTPUT_FILE)"
+	-rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
+	LANG=C $(GENHTML) --prefix $(CODE_COVERAGE_DIRECTORY) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
+	@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
+else
+	@echo "Need to reconfigure with --enable-code-coverage"
+endif
+
+# Hook rule executed before code-coverage-capture, overridable by the user
+code-coverage-capture-hook:
+
+clean: code-coverage-clean
+code-coverage-clean:
+	-$(LCOV) --directory $(top_builddir) -z
+	-rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+	-find . -name "*.gcda" -o -name "*.gcov" -delete
+
+GITIGNOREFILES ?=
+GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+
+DISTCHECK_CONFIGURE_FLAGS ?=
+DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
+
+.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
+'
+
+	AC_SUBST([GNOME_CODE_COVERAGE_RULES])
+	m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([GNOME_CODE_COVERAGE_RULES])])
+])
+
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Configure paths for GLIB
+# Owen Taylor     1997-2001
+
+dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject,
+dnl gthread, or gio is specified in MODULES, pass to pkg-config
+dnl
+AC_DEFUN([AM_PATH_GLIB_2_0],
+[dnl 
+dnl Get the cflags and libraries from pkg-config
+dnl
+AC_ARG_ENABLE(glibtest, [  --disable-glibtest      do not try to compile and run a test GLIB program],
+		    , enable_glibtest=yes)
+
+  pkg_config_args=glib-2.0
+  for module in . $4
+  do
+      case "$module" in
+         gmodule) 
+             pkg_config_args="$pkg_config_args gmodule-2.0"
+         ;;
+         gmodule-no-export) 
+             pkg_config_args="$pkg_config_args gmodule-no-export-2.0"
+         ;;
+         gobject) 
+             pkg_config_args="$pkg_config_args gobject-2.0"
+         ;;
+         gthread) 
+             pkg_config_args="$pkg_config_args gthread-2.0"
+         ;;
+         gio*) 
+             pkg_config_args="$pkg_config_args $module-2.0"
+         ;;
+      esac
+  done
+
+  PKG_PROG_PKG_CONFIG([0.16])
+
+  no_glib=""
+
+  if test "x$PKG_CONFIG" = x ; then
+    no_glib=yes
+    PKG_CONFIG=no
+  fi
+
+  min_glib_version=ifelse([$1], ,2.0.0,$1)
+  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
+
+  if test x$PKG_CONFIG != xno ; then
+    ## don't try to run the test against uninstalled libtool libs
+    if $PKG_CONFIG --uninstalled $pkg_config_args; then
+	  echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
+	  enable_glibtest=no
+    fi
+
+    if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
+	  :
+    else
+	  no_glib=yes
+    fi
+  fi
+
+  if test x"$no_glib" = x ; then
+    GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
+    GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
+    GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
+    GLIB_COMPILE_RESOURCES=`$PKG_CONFIG --variable=glib_compile_resources gio-2.0`
+
+    GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
+    GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
+    glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_glibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GLIB_CFLAGS"
+      LIBS="$GLIB_LIBS $LIBS"
+dnl
+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
+dnl checks the results of pkg-config to some extent)
+dnl
+      rm -f conf.glibtest
+      AC_TRY_RUN([
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int 
+main ()
+{
+  unsigned int major, minor, micro;
+  char *tmp_version;
+
+  fclose (fopen ("conf.glibtest", "w"));
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_glib_version");
+  if (sscanf(tmp_version, "%u.%u.%u", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_glib_version");
+     exit(1);
+   }
+
+  if ((glib_major_version != $glib_config_major_version) ||
+      (glib_minor_version != $glib_config_minor_version) ||
+      (glib_micro_version != $glib_config_micro_version))
+    {
+      printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
+             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+             glib_major_version, glib_minor_version, glib_micro_version);
+      printf ("*** was found! If pkg-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+      printf("*** to point to the correct configuration files\n");
+    } 
+  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+	   (glib_minor_version != GLIB_MINOR_VERSION) ||
+           (glib_micro_version != GLIB_MICRO_VERSION))
+    {
+      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+	     glib_major_version, glib_minor_version, glib_micro_version);
+    }
+  else
+    {
+      if ((glib_major_version > major) ||
+        ((glib_major_version == major) && (glib_minor_version > minor)) ||
+        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GLIB (%u.%u.%u) was found.\n",
+               glib_major_version, glib_minor_version, glib_micro_version);
+        printf("*** You need a version of GLIB newer than %u.%u.%u. The latest version of\n",
+	       major, minor, micro);
+        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
+        printf("*** correct copy of pkg-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_glib" = x ; then
+     AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$PKG_CONFIG" = "no" ; then
+       echo "*** A new enough version of pkg-config was not found."
+       echo "*** See http://www.freedesktop.org/software/pkgconfig/"
+     else
+       if test -f conf.glibtest ; then
+        :
+       else
+          echo "*** Could not run GLIB test program, checking why..."
+          ac_save_CFLAGS="$CFLAGS"
+          ac_save_LIBS="$LIBS"
+          CFLAGS="$CFLAGS $GLIB_CFLAGS"
+          LIBS="$LIBS $GLIB_LIBS"
+          AC_TRY_LINK([
+#include <glib.h>
+#include <stdio.h>
+],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GLIB is incorrectly installed."])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GLIB_CFLAGS=""
+     GLIB_LIBS=""
+     GLIB_GENMARSHAL=""
+     GOBJECT_QUERY=""
+     GLIB_MKENUMS=""
+     GLIB_COMPILE_RESOURCES=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GLIB_CFLAGS)
+  AC_SUBST(GLIB_LIBS)
+  AC_SUBST(GLIB_GENMARSHAL)
+  AC_SUBST(GOBJECT_QUERY)
+  AC_SUBST(GLIB_MKENUMS)
+  AC_SUBST(GLIB_COMPILE_RESOURCES)
+  rm -f conf.glibtest
+])
+
 m4_include([m4/as-ac-expand.m4])
 m4_include([m4/jhflags.m4])
 m4_include([m4/libtool.m4])