diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 931 |
1 files changed, 931 insertions, 0 deletions
diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 000000000..d4ccb1737 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,931 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Automake source file for the Parma Polyhedra Library. +# Copyright (C) 2001-2010 Roberto Bagnara <bagnara@cs.unipr.it> +# Copyright (C) 2010-2011 BUGSENG srl (http://bugseng.com) +# +# This file is part of the Parma Polyhedra Library (PPL). +# +# The PPL is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; either version 3 of the License, or (at your +# option) any later version. +# +# The PPL is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02111-1307, USA. +# +# For the most up-to-date information see the Parma Polyhedra Library +# site: http://www.cs.unipr.it/ppl/ . + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +DIST_COMMON = README $(am__configure_deps) $(dist_noinst_HEADERS) \ + $(dist_noinst_SCRIPTS) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(srcdir)/ppl.lsm.in $(top_srcdir)/configure COPYING ChangeLog \ + INSTALL NEWS TODO compile config.guess config.rpath config.sub \ + depcomp install-sh ltmain.sh missing mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_ciao.m4 \ + $(top_srcdir)/m4/ac_check_fpu_control.m4 \ + $(top_srcdir)/m4/ac_check_gmp.m4 \ + $(top_srcdir)/m4/ac_check_sicstus_prolog.m4 \ + $(top_srcdir)/m4/ac_check_swi_prolog.m4 \ + $(top_srcdir)/m4/ac_check_xsb_prolog.m4 \ + $(top_srcdir)/m4/ac_check_yap.m4 \ + $(top_srcdir)/m4/ac_cxx_attribute_weak.m4 \ + $(top_srcdir)/m4/ac_cxx_double_binary_format.m4 \ + $(top_srcdir)/m4/ac_cxx_double_exact_output.m4 \ + $(top_srcdir)/m4/ac_cxx_flexible_arrays.m4 \ + $(top_srcdir)/m4/ac_cxx_float_binary_format.m4 \ + $(top_srcdir)/m4/ac_cxx_float_exact_output.m4 \ + $(top_srcdir)/m4/ac_cxx_ieee_inexact_flag.m4 \ + $(top_srcdir)/m4/ac_cxx_limit_memory.m4 \ + $(top_srcdir)/m4/ac_cxx_long_double_binary_format.m4 \ + $(top_srcdir)/m4/ac_cxx_long_double_exact_output.m4 \ + $(top_srcdir)/m4/ac_cxx_plain_char_is_signed.m4 \ + $(top_srcdir)/m4/ac_cxx_proper_long_double.m4 \ + $(top_srcdir)/m4/ac_cxx_remainder_bug.m4 \ + $(top_srcdir)/m4/ac_prog_jar.m4 \ + $(top_srcdir)/m4/ac_prog_java.m4 \ + $(top_srcdir)/m4/ac_prog_javac.m4 \ + $(top_srcdir)/m4/ac_prog_javah.m4 \ + $(top_srcdir)/m4/ac_text_md5sum.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/m4.m4 \ + $(top_srcdir)/m4/ocaml.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = ppl.lsm +CONFIG_CLEAN_VPATH_FILES = +SCRIPTS = $(dist_noinst_SCRIPTS) +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +HEADERS = $(dist_noinst_HEADERS) $(nodist_noinst_HEADERS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 \ + $(distdir).tar.lzma $(distdir).zip +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CIAO_PROLOG = @CIAO_PROLOG@ +CIAO_PROLOG_INCLUDE_OPTIONS = @CIAO_PROLOG_INCLUDE_OPTIONS@ +CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GNU_PROLOG = @GNU_PROLOG@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +ISODATE = @ISODATE@ +JAR = @JAR@ +JAVA = @JAVA@ +JAVAC = @JAVAC@ +JAVAH = @JAVAH@ +JNIFLAGS = @JNIFLAGS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBEXT = @LIBEXT@ +LIBGMP = @LIBGMP@ +LIBGMPXX = @LIBGMPXX@ +LIBGMPXX_PREFIX = @LIBGMPXX_PREFIX@ +LIBGMP_PREFIX = @LIBGMP_PREFIX@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBGMP = @LTLIBGMP@ +LTLIBGMPXX = @LTLIBGMPXX@ +LTLIBOBJS = @LTLIBOBJS@ +M4 = @M4@ +M4_DEBUGFILE = @M4_DEBUGFILE@ +MAKEINFO = @MAKEINFO@ +MD5SUM = @MD5SUM@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OCAMLBEST = @OCAMLBEST@ +OCAMLBUILD = @OCAMLBUILD@ +OCAMLC = @OCAMLC@ +OCAMLCDOTOPT = @OCAMLCDOTOPT@ +OCAMLDEP = @OCAMLDEP@ +OCAMLDOC = @OCAMLDOC@ +OCAMLLIB = @OCAMLLIB@ +OCAMLMKLIB = @OCAMLMKLIB@ +OCAMLMKTOP = @OCAMLMKTOP@ +OCAMLOPT = @OCAMLOPT@ +OCAMLOPTDOTOPT = @OCAMLOPTDOTOPT@ +OCAMLVERSION = @OCAMLVERSION@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PPL_VERSION_BETA = @PPL_VERSION_BETA@ +PPL_VERSION_MAJOR = @PPL_VERSION_MAJOR@ +PPL_VERSION_MINOR = @PPL_VERSION_MINOR@ +PPL_VERSION_REVISION = @PPL_VERSION_REVISION@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SHREXT = @SHREXT@ +SICSTUS_PROLOG_INCLUDE_OPTIONS = @SICSTUS_PROLOG_INCLUDE_OPTIONS@ +STRIP = @STRIP@ +SWI_PROLOG = @SWI_PROLOG@ +SWI_PROLOG_INCLUDE_OPTIONS = @SWI_PROLOG_INCLUDE_OPTIONS@ +SWI_PROLOG_LD = @SWI_PROLOG_LD@ +SWI_PROLOG_LD_OPTIONS = @SWI_PROLOG_LD_OPTIONS@ +TEXT_MD5SUM = @TEXT_MD5SUM@ +VALGRIND = @VALGRIND@ +VERSION = @VERSION@ +XSB_PROLOG_INCLUDE_OPTIONS = @XSB_PROLOG_INCLUDE_OPTIONS@ +YAP_PROLOG = @YAP_PROLOG@ +YAP_PROLOG_INCLUDE_OPTIONS = @YAP_PROLOG_INCLUDE_OPTIONS@ +YAP_PROLOG_LD_OPTIONS = @YAP_PROLOG_LD_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +ciao_prolog = @ciao_prolog@ +coefficient_mnemonic = @coefficient_mnemonic@ +datadir = @datadir@ +datarootdir = @datarootdir@ +debug_flag = @debug_flag@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +extra_includes = @extra_includes@ +extra_libraries = @extra_libraries@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +mlgmp_dir = @mlgmp_dir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +required_instantiations = @required_instantiations@ +required_instantiations_c_cxx_headers = @required_instantiations_c_cxx_headers@ +required_instantiations_c_cxx_objects = @required_instantiations_c_cxx_objects@ +required_instantiations_c_cxx_sources = @required_instantiations_c_cxx_sources@ +required_instantiations_canonical_names = @required_instantiations_canonical_names@ +required_instantiations_java_classes = @required_instantiations_java_classes@ +required_instantiations_java_cxx_headers = @required_instantiations_java_cxx_headers@ +required_instantiations_java_cxx_headers_sources = @required_instantiations_java_cxx_headers_sources@ +required_instantiations_java_cxx_objects = @required_instantiations_java_cxx_objects@ +required_instantiations_java_cxx_sources = @required_instantiations_java_cxx_sources@ +required_instantiations_java_sources = @required_instantiations_java_sources@ +required_instantiations_ocaml_cxx_headers = @required_instantiations_ocaml_cxx_headers@ +required_instantiations_ocaml_cxx_objects = @required_instantiations_ocaml_cxx_objects@ +required_instantiations_ocaml_cxx_sources = @required_instantiations_ocaml_cxx_sources@ +required_instantiations_prolog_cxx_headers = @required_instantiations_prolog_cxx_headers@ +required_instantiations_prolog_cxx_objects = @required_instantiations_prolog_cxx_objects@ +required_instantiations_prolog_cxx_sources = @required_instantiations_prolog_cxx_sources@ +required_instantiations_prolog_generated_test_sources = @required_instantiations_prolog_generated_test_sources@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sicstus_prolog = @sicstus_prolog@ +srcdir = @srcdir@ +subdirs = @subdirs@ +swi_prolog = @swi_prolog@ +swi_prolog_ld = @swi_prolog_ld@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +uudecode = @uudecode@ +xsb_prolog = @xsb_prolog@ +yap_prolog = @yap_prolog@ + +# Tell aclocal where to find `.m4' files. +ACLOCAL_AMFLAGS = -I m4 +SUBDIRS = . utils src Watchdog tests interfaces demos doc m4 +dist_noinst_SCRIPTS = \ +configure + +nodist_noinst_HEADERS = \ +ppl-config.h + +dist_noinst_HEADERS = \ +instchk.hh + +DISTCHECK_CONFIGURE_FLAGS = \ +--enable-shared --enable-watchdog + + +# Kludge: we need to force building `ppl-config.h' on `make dist', +# hence we list it in `EXTRA_DIST'; but we do not want to distribute +# it, hence we erase it in `dist-hook'. +EXTRA_DIST = \ +ppl-config.h \ +ppl-config.h.in \ +ppl-config.sed \ +ppl.lsm.in \ +BUGS \ +CREDITS \ +ChangeLog_2001-2008 \ +README.alpha \ +README.arm \ +README.configure \ +README.solaris \ +STANDARDS + +DISTCLEANFILES = \ +ppl-config.h + +distcleancheck_listfiles = \ + find -type f -exec sh -c 'test -f $(srcdir)/{} || echo {}' ';' + +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +ppl.lsm: $(top_builddir)/config.status $(srcdir)/ppl.lsm.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(SCRIPTS) $(HEADERS) config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + + +ppl-config.h: config.h $(srcdir)/ppl-config.sed + $(SED) -f $(srcdir)/ppl-config.sed $< >$@ + +ppl-config.h.in: config.h.in $(srcdir)/ppl-config.sed + $(SED) -f $(srcdir)/ppl-config.sed $< >$@ + +# Kludge: we need to force building `ppl-config.h' on `make dist', +# hence we list it in `EXTRA_DIST'; but we do not want to distribute +# it, hence we erase it in `dist-hook'. +dist-hook: + rm -f $(distdir)/ppl-config.h \ + && $(SED) -e "s/^enableval=thorough$$/enableval=quick/g" \ + -e "s/^default_interfaces=\$${available_interfaces}$$/default_interfaces=\$${non_prolog_interfaces}/g" \ + <$(distdir)/configure.ac >$(distdir)/configure.ac.new \ + && touch $(distdir)/configure.ac.new -r $(distdir)/configure.ac \ + && mv -f $(distdir)/configure.ac.new $(distdir)/configure.ac + $(SED) -e "s/^enableval=thorough$$/enableval=quick/g" \ + -e "s/^default_interfaces=\$${available_interfaces}$$/default_interfaces=\$${non_prolog_interfaces}/g" \ + <$(distdir)/configure >$(distdir)/configure.new \ + && touch $(distdir)/configure.new -r $(distdir)/configure \ + && mv -f $(distdir)/configure.new $(distdir)/configure \ + && chmod +x $(distdir)/configure + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |