diff options
Diffstat (limited to 'config')
| -rwxr-xr-x | config | 967 |
1 files changed, 967 insertions, 0 deletions
@@ -0,0 +1,967 @@ +#!/bin/sh +# +# OpenSSL config: determine the operating system and run ./Configure +# +# "config -h" for usage information. +# +# this is a merge of minarch and GuessOS from the Apache Group. +# Originally written by Tim Hudson <tjh@cryptsoft.com>. + +# Original Apache Group comments on GuessOS + +# Simple OS/Platform guesser. Similar to config.guess but +# much, much smaller. Since it was developed for use with +# Apache, it follows under Apache's regular licensing +# with one specific addition: Any changes or additions +# to this script should be Emailed to the Apache +# group (apache@apache.org) in general and to +# Jim Jagielski (jim@jaguNET.com) in specific. +# +# Be as similar to the output of config.guess/config.sub +# as possible. + +PREFIX="" +SUFFIX="" +TEST="false" +EXE="" + +# pick up any command line args to config +for i +do +case "$i" in +-d*) PREFIX="debug-";; +-t*) TEST="true";; +-h*) TEST="true"; cat <<EOF +Usage: config [options] + -d Add a debug- prefix to machine choice. + -t Test mode, do not run the Configure perl script. + -h This help. + +Any other text will be passed to the Configure perl script. +See INSTALL for instructions. + +EOF +;; +*) options=$options" $i" ;; +esac +done + +# First get uname entries that we use below + +[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" +[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" +[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" +[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" + + +# Now test for ISC and SCO, since it is has a braindamaged uname. +# +# We need to work around FreeBSD 1.1.5.1 +( +XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` +if [ "x$XREL" != "x" ]; then + if [ -f /etc/kconfig ]; then + case "$XREL" in + 4.0|4.1) + echo "${MACHINE}-whatever-isc4"; exit 0 + ;; + esac + else + case "$XREL" in + 3.2v4.2) + echo "whatever-whatever-sco3"; exit 0 + ;; + 3.2v5.0*) + echo "whatever-whatever-sco5"; exit 0 + ;; + 4.2MP) + case "x${VERSION}" in + x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; + x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; + x2*) echo "whatever-whatever-unixware2"; exit 0 ;; + esac + ;; + 4.2) + echo "whatever-whatever-unixware1"; exit 0 + ;; + 5*) + case "x${VERSION}" in + # We hardcode i586 in place of ${MACHINE} for the + # following reason. The catch is that even though Pentium + # is minimum requirement for platforms in question, + # ${MACHINE} gets always assigned to i386. Now, problem + # with i386 is that it makes ./config pass 386 to + # ./Configure, which in turn makes make generate + # inefficient SHA-1 (for this moment) code. + x[678]*) echo "i586-sco-unixware7"; exit 0 ;; + esac + ;; + esac + fi +fi +# Now we simply scan though... In most cases, the SYSTEM info is enough +# +case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in + MPE/iX:*) + MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` + echo "parisc-hp-MPE/iX"; exit 0 + ;; + A/UX:*) + echo "m68k-apple-aux3"; exit 0 + ;; + + AIX:[3-9]:4:*) + echo "${MACHINE}-ibm-aix"; exit 0 + ;; + + AIX:*:[5-9]:*) + echo "${MACHINE}-ibm-aix"; exit 0 + ;; + + AIX:*) + echo "${MACHINE}-ibm-aix3"; exit 0 + ;; + + BeOS:*:BePC) + if [ -e /boot/develop/headers/be/bone ]; then + echo "beos-x86-bone"; exit 0 + else + echo "beos-x86-r5"; exit 0 + fi + ;; + + dgux:*) + echo "${MACHINE}-dg-dgux"; exit 0 + ;; + + HI-UX:*) + echo "${MACHINE}-hi-hiux"; exit 0 + ;; + + HP-UX:*) + HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "$HPUXVER" in + 1[0-9].*) # HPUX 10 and 11 targets are unified + echo "${MACHINE}-hp-hpux1x"; exit 0 + ;; + *) + echo "${MACHINE}-hp-hpux"; exit 0 + ;; + esac + ;; + + IRIX:5.*) + echo "mips2-sgi-irix"; exit 0 + ;; + + IRIX:6.*) + echo "mips3-sgi-irix"; exit 0 + ;; + + IRIX64:*) + echo "mips4-sgi-irix64"; exit 0 + ;; + + Linux:[2-9].*) + echo "${MACHINE}-whatever-linux2"; exit 0 + ;; + + Linux:1.*) + echo "${MACHINE}-whatever-linux1"; exit 0 + ;; + + GNU*) + echo "hurd-x86"; exit 0; + ;; + + LynxOS:*) + echo "${MACHINE}-lynx-lynxos"; exit 0 + ;; + + BSD/OS:4.*) # BSD/OS always says 386 + echo "i486-whatever-bsdi4"; exit 0 + ;; + + BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) + case `/sbin/sysctl -n hw.model` in + Pentium*) + echo "i586-whatever-bsdi"; exit 0 + ;; + *) + echo "i386-whatever-bsdi"; exit 0 + ;; + esac; + ;; + + BSD/386:*|BSD/OS:*) + echo "${MACHINE}-whatever-bsdi"; exit 0 + ;; + + FreeBSD:*:*:*386*) + VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` + MACH=`sysctl -n hw.model` + ARCH='whatever' + case ${MACH} in + *386* ) MACH="i386" ;; + *486* ) MACH="i486" ;; + Pentium\ II*) MACH="i686" ;; + Pentium* ) MACH="i586" ;; + * ) MACH="$MACHINE" ;; + esac + case ${MACH} in + i[0-9]86 ) ARCH="pc" ;; + esac + echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 + ;; + + FreeBSD:*) + echo "${MACHINE}-whatever-freebsd"; exit 0 + ;; + + NetBSD:*:*:*386*) + echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 + ;; + + NetBSD:*) + echo "${MACHINE}-whatever-netbsd"; exit 0 + ;; + + OpenBSD:*) + echo "${MACHINE}-whatever-openbsd"; exit 0 + ;; + + OpenUNIX:*) + echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 + ;; + + OSF1:*:*:*alpha*) + OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` + case "$OSFMAJOR" in + 4|5) + echo "${MACHINE}-dec-tru64"; exit 0 + ;; + 1|2|3) + echo "${MACHINE}-dec-osf"; exit 0 + ;; + *) + echo "${MACHINE}-dec-osf"; exit 0 + ;; + esac + ;; + + QNX:*) + case "$RELEASE" in + 4*) + echo "${MACHINE}-whatever-qnx4" + ;; + 6*) + echo "${MACHINE}-whatever-qnx6" + ;; + *) + echo "${MACHINE}-whatever-qnx" + ;; + esac + exit 0 + ;; + + Paragon*:*:*:*) + echo "i860-intel-osf1"; exit 0 + ;; + + Rhapsody:*) + echo "ppc-apple-rhapsody"; exit 0 + ;; + + Darwin:*) + case "$MACHINE" in + Power*) + echo "ppc-apple-darwin${VERSION}" + ;; + *) + echo "i686-apple-darwin${VERSION}" + ;; + esac + exit 0 + ;; + + SunOS:5.*) + echo "${MACHINE}-whatever-solaris2"; exit 0 + ;; + + SunOS:*) + echo "${MACHINE}-sun-sunos4"; exit 0 + ;; + + UNIX_System_V:4.*:*) + echo "${MACHINE}-whatever-sysv4"; exit 0 + ;; + + VOS:*:*:i786) + echo "i386-stratus-vos"; exit 0 + ;; + + VOS:*:*:*) + echo "hppa1.1-stratus-vos"; exit 0 + ;; + + *:4*:R4*:m88k) + echo "${MACHINE}-whatever-sysv4"; exit 0 + ;; + + DYNIX/ptx:4*:*) + echo "${MACHINE}-whatever-sysv4"; exit 0 + ;; + + *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) + echo "i486-ncr-sysv4"; exit 0 + ;; + + ULTRIX:*) + echo "${MACHINE}-unknown-ultrix"; exit 0 + ;; + + SINIX*|ReliantUNIX*) + echo "${MACHINE}-siemens-sysv4"; exit 0 + ;; + + POSIX-BC*) + echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" + ;; + + machten:*) + echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; + ;; + + library:*) + echo "${MACHINE}-ncr-sysv4"; exit 0 + ;; + + ConvexOS:*:11.0:*) + echo "${MACHINE}-v11-${SYSTEM}"; exit 0; + ;; + + NEWS-OS:4.*) + echo "mips-sony-newsos4"; exit 0; + ;; + + MINGW*) + echo "${MACHINE}-whatever-mingw"; exit 0; + ;; + CYGWIN*) + case "$RELEASE" in + [bB]*|1.0|1.[12].*) + echo "${MACHINE}-whatever-cygwin_pre1.3" + ;; + *) + echo "${MACHINE}-whatever-cygwin" + ;; + esac + exit 0 + ;; + + *"CRAY T3E") + echo "t3e-cray-unicosmk"; exit 0; + ;; + + *CRAY*) + echo "j90-cray-unicos"; exit 0; + ;; + + NONSTOP_KERNEL*) + echo "nsr-tandem-nsk"; exit 0; + ;; + + vxworks*) + echo "${MACHINE}-whatever-vxworks"; exit 0; + ;; +esac + +# +# Ugg. These are all we can determine by what we know about +# the output of uname. Be more creative: +# + +# Do the Apollo stuff first. Here, we just simply assume +# that the existance of the /usr/apollo directory is proof +# enough +if [ -d /usr/apollo ]; then + echo "whatever-apollo-whatever" + exit 0 +fi + +# Now NeXT +ISNEXT=`hostinfo 2>/dev/null` +case "$ISNEXT" in + *'NeXT Mach 3.3'*) + echo "whatever-next-nextstep3.3"; exit 0 + ;; + *NeXT*) + echo "whatever-next-nextstep"; exit 0 + ;; +esac + +# At this point we gone through all the one's +# we know of: Punt + +echo "${MACHINE}-whatever-${SYSTEM}" +exit 0 +) 2>/dev/null | ( + +# --------------------------------------------------------------------------- +# this is where the translation occurs into SSLeay terms +# --------------------------------------------------------------------------- + +# Only set CC if not supplied already +if [ -z "$CROSS_COMPILE$CC" ]; then + GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null` + if [ "$GCCVER" != "" ]; then + # then strip off whatever prefix egcs prepends the number with... + # Hopefully, this will work for any future prefixes as well. + GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` + # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion + # does give us what we want though, so we use that. We just just the + # major and minor version numbers. + # peak single digit before and after first dot, e.g. 2.95.1 gives 29 + GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` + CC=gcc + else + CC=cc + fi +fi +GCCVER=${GCCVER:-0} +if [ "$SYSTEM" = "HP-UX" ];then + # By default gcc is a ILP32 compiler (with long long == 64). + GCC_BITS="32" + if [ $GCCVER -ge 30 ]; then + # PA64 support only came in with gcc 3.0.x. + # We check if the preprocessor symbol __LP64__ is defined... + if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then + : # __LP64__ has slipped through, it therefore is not defined + else + GCC_BITS="64" + fi + fi +fi +if [ "$SYSTEM" = "SunOS" ]; then + if [ $GCCVER -ge 30 ]; then + # 64-bit ABI isn't officially supported in gcc 3.0, but it appears + # to be working, at the very least 'make test' passes... + if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then + GCC_ARCH="-m64" + else + GCC_ARCH="-m32" + fi + fi + # check for WorkShop C, expected output is "cc: blah-blah C x.x" + CCVER=`(cc -V 2>&1) 2>/dev/null | \ + egrep -e '^cc: .* C [0-9]\.[0-9]' | \ + sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` + CCVER=${CCVER:-0} + if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then + CC=cc # overrides gcc!!! + if [ $CCVER -eq 50 ]; then + echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" + echo " patch #107357-01 or later applied." + sleep 5 + fi + fi +fi + +if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then + # check for Compaq C, expected output is "blah-blah C Vx.x" + CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ + egrep -e '.* C V[0-9]\.[0-9]' | \ + sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` + CCCVER=${CCCVER:-0} + if [ $CCCVER -gt 60 ]; then + CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably + # only on hash routines and des, otherwise gcc (2.95) + # keeps along rather tight... + fi +fi + +if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc + (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc +fi + +CCVER=${CCVER:-0} + +# read the output of the embedded GuessOS +read GUESSOS + +echo Operating system: $GUESSOS + +# now map the output into SSLeay terms ... really should hack into the +# script above so we end up with values in vars but that would take +# more time that I want to waste at the moment +case "$GUESSOS" in + uClinux*64*) + OUT=uClinux-dist64 + ;; + uClinux*) + OUT=uClinux-dist + ;; + mips2-sgi-irix) + CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` + CPU=${CPU:-0} + if [ $CPU -ge 4000 ]; then + options="$options -mips2" + fi + OUT="irix-$CC" + ;; + mips3-sgi-irix) + #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` + #CPU=${CPU:-0} + #if [ $CPU -ge 5000 ]; then + # options="$options -mips4" + #else + # options="$options -mips3" + #fi + OUT="irix-mips3-$CC" + ;; + mips4-sgi-irix64) + echo "WARNING! If you wish to build 64-bit library, then you have to" + echo " invoke './Configure irix64-mips4-$CC' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` + #CPU=${CPU:-0} + #if [ $CPU -ge 5000 ]; then + # options="$options -mips4" + #else + # options="$options -mips3" + #fi + OUT="irix-mips3-$CC" + ;; + ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; + ppc-apple-darwin*) + ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null` + if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then + echo "WARNING! If you wish to build 64-bit library, then you have to" + echo " invoke './Configure darwin64-ppc-cc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + fi + if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then + OUT="darwin64-ppc-cc" + else + OUT="darwin-ppc-cc" + fi ;; + i?86-apple-darwin*) + ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null` + if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then + echo "WARNING! If you wish to build 64-bit library, then you have to" + echo " invoke './Configure darwin64-x86_64-cc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + fi + if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then + OUT="darwin64-x86_64-cc" + else + OUT="darwin-i386-cc" + fi ;; + armv6+7-*-iphoneos) + options="$options -arch%20armv6 -arch%20armv7" + OUT="iphoneos-cross" ;; + *-*-iphoneos) + options="$options -arch%20${MACHINE}" + OUT="iphoneos-cross" ;; + alpha-*-linux2) + ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` + case ${ISA:-generic} in + *[678]) OUT="linux-alpha+bwx-$CC" ;; + *) OUT="linux-alpha-$CC" ;; + esac + if [ "$CC" = "gcc" ]; then + case ${ISA:-generic} in + EV5|EV45) options="$options -mcpu=ev5";; + EV56|PCA56) options="$options -mcpu=ev56";; + *) options="$options -mcpu=ev6";; + esac + fi + ;; + ppc64-*-linux2) + echo "WARNING! If you wish to build 64-bit library, then you have to" + echo " invoke './Configure linux-ppc64' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + OUT="linux-ppc" + ;; + ppc-*-linux2) OUT="linux-ppc" ;; + ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;; + ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;; + pentium-*-vxworks*) OUT="vxworks-pentium" ;; + simlinux-*-vxworks*) OUT="vxworks-simlinux" ;; + mips-*-vxworks*) OUT="vxworks-mips";; + ia64-*-linux?) OUT="linux-ia64" ;; + sparc64-*-linux2) + echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure linux64-sparcv9' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + OUT="linux-sparcv9" ;; + sparc-*-linux2) + KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` + case ${KARCH:-sun4} in + sun4u*) OUT="linux-sparcv9" ;; + sun4m) OUT="linux-sparcv8" ;; + sun4d) OUT="linux-sparcv8" ;; + *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; + esac ;; + parisc*-*-linux2) + # 64-bit builds under parisc64 linux are not supported and + # compiler is expected to generate 32-bit objects... + CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` + CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` + + # ??TODO ?? Model transformations + # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off + # assuming no further arch. identification will ever be used by GCC. + # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. + # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers + # for these chips in the future. + # PA7300LC -> 7100LC (1.1) + # PA8200 -> 8000 (2.0) + # PA8500 -> 8000 (2.0) + # PA8600 -> 8000 (2.0) + + CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` + # Finish Model transformations + + options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" + OUT="linux-generic32" ;; + armv[1-3]*-*-linux2) OUT="linux-generic32" ;; + armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;; + arm*-*-linux2) OUT="linux-armv4" ;; + sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; + sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; + m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; + s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; + s390x-*-linux2) + # To be uncommented when glibc bug is fixed, see Configure... + #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then + # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you" + # echo " have to invoke './Configure linux32-s390x' *manually*." + # if [ "$TEST" = "false" -a -t -1 ]; then + # echo " You have about 5 seconds to press Ctrl-C to abort." + # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + # fi + #fi + OUT="linux64-s390x" + ;; + x86_64-*-linux?) OUT="linux-x86_64" ;; + *86-*-linux2) OUT="linux-elf" + if [ "$GCCVER" -gt 28 ]; then + if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then + options="$options -march=pentium" + fi + if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then + options="$options -march=pentiumpro" + fi + if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then + options="$options -march=k6" + fi + fi ;; + *-*-linux1) OUT="linux-aout" ;; + *-*-linux2) OUT="linux-generic32" ;; + sun4[uv]*-*-solaris2) + OUT="solaris-sparcv9-$CC" + ISA64=`(isalist) 2>/dev/null | grep sparcv9` + if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then + if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then + echo "WARNING! If you wish to build 64-bit library, then you have to" + echo " invoke './Configure solaris64-sparcv9-cc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then + # $GCC_ARCH denotes default ABI chosen by compiler driver + # (first one found on the $PATH). I assume that user + # expects certain consistency with the rest of his builds + # and therefore switch over to 64-bit. <appro> + OUT="solaris64-sparcv9-gcc" + echo "WARNING! If you wish to build 32-bit library, then you have to" + echo " invoke './Configure solaris-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + elif [ "$GCC_ARCH" = "-m32" ]; then + echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + fi + fi + if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then + OUT="solaris64-sparcv9-$CC" + fi + ;; + sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; + sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; + sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; + *86*-*-solaris2) + ISA64=`(isalist) 2>/dev/null | grep amd64` + if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then + OUT="solaris64-x86_64-$CC" + else + OUT="solaris-x86-$CC" + if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then + options="$options no-sse2" + fi + fi + ;; + *-*-sunos4) OUT="sunos-$CC" ;; + + *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; + alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;; + powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;; + sparc64-*-*bsd*) OUT="BSD-sparc64" ;; + ia64-*-*bsd*) OUT="BSD-ia64" ;; + amd64-*-*bsd*) OUT="BSD-x86_64" ;; + *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... + if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD + libc=/usr/lib/libc.so + else # OpenBSD + # ld searches for highest libc.so.* and so do we + libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null` + fi + case "`(file -L $libc) 2>/dev/null`" in + *ELF*) OUT="BSD-x86-elf" ;; + *) OUT="BSD-x86"; options="$options no-sse2" ;; + esac ;; + *-*-*bsd*) OUT="BSD-generic32" ;; + + *-*-osf) OUT="osf1-alpha-cc" ;; + *-*-tru64) OUT="tru64-alpha-cc" ;; + *-*-[Uu]nix[Ww]are7) + if [ "$CC" = "gcc" ]; then + OUT="unixware-7-gcc" ; options="$options no-sse2" + else + OUT="unixware-7" ; options="$options no-sse2 -D__i386__" + fi + ;; + *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; + *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; + *-*-vos) + options="$options no-threads no-shared no-asm no-dso" + EXE=".pm" + OUT="vos-$CC" ;; + BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; + RM*-siemens-sysv4) OUT="ReliantUNIX" ;; + *-siemens-sysv4) OUT="SINIX" ;; + *-hpux1*) + if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then + OUT="hpux64-parisc2-gcc" + fi + [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` + KERNEL_BITS=${KERNEL_BITS:-32} + CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` + CPU_VERSION=${CPU_VERSION:-0} + # See <sys/unistd.h> for further info on CPU_VERSION. + if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU + if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then + OUT="hpux64-ia64-cc" + else + OUT="hpux-ia64-cc" + fi + elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU + OUT=${OUT:-"hpux-parisc2-${CC}"} + if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then + echo "WARNING! If you wish to build 64-bit library then you have to" + echo " invoke './Configure hpux64-parisc2-cc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + fi + elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU + OUT="hpux-parisc-${CC}" + elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU + OUT="hpux-parisc-${CC}" + else # Motorola(?) CPU + OUT="hpux-$CC" + fi + options="$options -D_REENTRANT" ;; + *-hpux) OUT="hpux-parisc-$CC" ;; + *-aix) + [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` + KERNEL_BITS=${KERNEL_BITS:-32} + OBJECT_MODE=${OBJECT_MODE:-32} + if [ "$CC" = "gcc" ]; then + OUT="aix-gcc" + if [ $OBJECT_MODE -eq 64 ]; then + echo 'Your $OBJECT_MODE was found to be set to 64' + OUT="aix64-gcc" + fi + elif [ $OBJECT_MODE -eq 64 ]; then + echo 'Your $OBJECT_MODE was found to be set to 64' + OUT="aix64-cc" + else + OUT="aix-cc" + if [ $KERNEL_BITS -eq 64 ]; then + echo "WARNING! If you wish to build 64-bit kit, then you have to" + echo " invoke './Configure aix64-cc' *manually*." + if [ "$TEST" = "false" -a -t 1 ]; then + echo " You have ~5 seconds to press Ctrl-C to abort." + (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 + fi + fi + fi + if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then + : # this applies even to Power3 and later, as they return PowerPC_POWER[345] + else + options="$options no-asm" + fi + ;; + # these are all covered by the catchall below + # *-dgux) OUT="dgux" ;; + mips-sony-newsos4) OUT="newsos4-gcc" ;; + *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; + *-*-cygwin) OUT="Cygwin" ;; + t3e-cray-unicosmk) OUT="cray-t3e" ;; + j90-cray-unicos) OUT="cray-j90" ;; + nsr-tandem-nsk) OUT="tandem-c89" ;; + beos-*) OUT="$GUESSOS" ;; + x86pc-*-qnx6) OUT="QNX6-i386" ;; + *-*-qnx6) OUT="QNX6" ;; + x86-*-android|i?86-*-android) OUT="android-x86" ;; + armv[7-9]*-*-android) OUT="android-armv7" ;; + *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; +esac + +# NB: This atalla support has been superceded by the ENGINE support +# That contains its own header and definitions anyway. Support can +# be enabled or disabled on any supported platform without external +# headers, eg. by adding the "hw-atalla" switch to ./config or +# perl Configure +# +# See whether we can compile Atalla support +#if [ -f /usr/include/atasi.h ] +#then +# options="$options -DATALLA" +#fi + +if expr "$options" : '.*no\-asm' > /dev/null; then :; else + sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \ + grep \\--noexecstack >/dev/null && \ + options="$options -Wa,--noexecstack" +fi + +# gcc < 2.8 does not support -march=ultrasparc +if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] +then + echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." + echo " Upgrade to gcc-2.8 or later." + sleep 5 + OUT=solaris-sparcv8-gcc +fi +if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] +then + echo "WARNING! Falling down to 'linux-sparcv8'." + echo " Upgrade to gcc-2.8 or later." + sleep 5 + OUT=linux-sparcv8 +fi + +case "$GUESSOS" in + i386-*) options="$options 386" ;; +esac + +for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha +do + if [ ! -d crypto/$i ] + then + options="$options no-$i" + fi +done + +# Discover Kerberos 5 (since it's still a prototype, we don't +# do any guesses yet, that's why this section is commented away. +#if [ -d /usr/kerberos ]; then +# krb5_dir=/usr/kerberos +# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ +# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ +# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ +# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ +# -a \( -f $krb5_dir/include/krb5.h \) ]; then +# options="$options --with-krb5-flavor=MIT" +# fi +#elif [ -d /usr/heimdal ]; then +# krb5_dir=/usr/heimdal +# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ +# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ +# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ +# -a \( -f $krb5_dir/include/krb5.h \) ]; then +# options="$options --with-krb5-flavor=Heimdal" +# fi +#fi + +if [ -z "$OUT" ]; then + OUT="$CC" +fi + +if [ ".$PERL" = . ] ; then + for i in . `echo $PATH | sed 's/:/ /g'`; do + if [ -f "$i/perl5$EXE" ] ; then + PERL="$i/perl5$EXE" + break; + fi; + done +fi + +if [ ".$PERL" = . ] ; then + for i in . `echo $PATH | sed 's/:/ /g'`; do + if [ -f "$i/perl$EXE" ] ; then + if "$i/perl$EXE" -e 'exit($]<5.0)'; then + PERL="$i/perl$EXE" + break; + fi; + fi; + done +fi + +if [ ".$PERL" = . ] ; then + echo "You need Perl 5." + exit 1 +fi + +# run Configure to check to see if we need to specify the +# compiler for the platform ... in which case we add it on +# the end ... otherwise we leave it off + +$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null +if [ $? = "0" ]; then + OUT="$OUT-$CC" +fi + +OUT="$PREFIX$OUT" + +$PERL ./Configure LIST | grep "$OUT" > /dev/null +if [ $? = "0" ]; then + echo Configuring for $OUT + + if [ "$TEST" = "true" ]; then + echo $PERL ./Configure $OUT $options + else + $PERL ./Configure $OUT $options + fi +else + echo "This system ($OUT) is not supported. See file INSTALL for details." +fi +) |