diff options
Diffstat (limited to 'Makefile.build')
| -rw-r--r-- | Makefile.build | 493 |
1 files changed, 493 insertions, 0 deletions
diff --git a/Makefile.build b/Makefile.build new file mode 100644 index 000000000..2fbe1ba7d --- /dev/null +++ b/Makefile.build @@ -0,0 +1,493 @@ +# Copyright 2012 the V8 project authors. All rights reserved. +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of Google Inc. nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +# Variable default definitions. Override them by exporting them in your shell. +CXX ?= g++ +LINK ?= g++ +OUTDIR ?= out +TESTJOBS ?= +GYPFLAGS ?= +TESTFLAGS ?= +ANDROID_NDK_ROOT ?= +ANDROID_NDK_HOST_ARCH ?= +ANDROID_TOOLCHAIN ?= +ANDROID_V8 ?= /data/local/tmp/v8 +NACL_SDK_ROOT ?= + +# Special build flags. Use them like this: "make library=shared" + +# library=shared || component=shared_library +ifeq ($(library), shared) + GYPFLAGS += -Dcomponent=shared_library +endif +ifdef component + GYPFLAGS += -Dcomponent=$(component) +endif +# console=readline +ifdef console + GYPFLAGS += -Dconsole=$(console) +endif +# disassembler=on +ifeq ($(disassembler), on) + GYPFLAGS += -Dv8_enable_disassembler=1 +endif +# objectprint=on +ifeq ($(objectprint), on) + GYPFLAGS += -Dv8_object_print=1 +endif +# verifyheap=on +ifeq ($(verifyheap), on) + GYPFLAGS += -Dv8_enable_verify_heap=1 +endif +# backtrace=off +ifeq ($(backtrace), off) + GYPFLAGS += -Dv8_enable_backtrace=0 +else + GYPFLAGS += -Dv8_enable_backtrace=1 +endif +# verifypredictable=on +ifeq ($(verifypredictable), on) + GYPFLAGS += -Dv8_enable_verify_predictable=1 +endif +# snapshot=off +ifeq ($(snapshot), off) + GYPFLAGS += -Dv8_use_snapshot='false' +endif +# extrachecks=on/off +ifeq ($(extrachecks), on) + GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1 +endif +ifeq ($(extrachecks), off) + GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0 +endif +# gdbjit=on/off +ifeq ($(gdbjit), on) + GYPFLAGS += -Dv8_enable_gdbjit=1 +endif +ifeq ($(gdbjit), off) + GYPFLAGS += -Dv8_enable_gdbjit=0 +endif +# vtunejit=on +ifeq ($(vtunejit), on) + GYPFLAGS += -Dv8_enable_vtunejit=1 +endif +# optdebug=on +ifeq ($(optdebug), on) + GYPFLAGS += -Dv8_optimized_debug=2 +endif +# unalignedaccess=on +ifeq ($(unalignedaccess), on) + GYPFLAGS += -Dv8_can_use_unaligned_accesses=true +endif +# randomseed=12345, disable random seed via randomseed=0 +ifdef randomseed + GYPFLAGS += -Dv8_random_seed=$(randomseed) +endif +# soname_version=1.2.3 +ifdef soname_version + GYPFLAGS += -Dsoname_version=$(soname_version) +endif +# werror=no +ifeq ($(werror), no) + GYPFLAGS += -Dwerror='' +endif +# presubmit=no +ifeq ($(presubmit), no) + TESTFLAGS += --no-presubmit +endif +# strictaliasing=off (workaround for GCC-4.5) +ifeq ($(strictaliasing), off) + GYPFLAGS += -Dv8_no_strict_aliasing=1 +endif +# regexp=interpreted +ifeq ($(regexp), interpreted) + GYPFLAGS += -Dv8_interpreted_regexp=1 +endif +# i18nsupport=off +ifeq ($(i18nsupport), off) + GYPFLAGS += -Dv8_enable_i18n_support=0 + TESTFLAGS += --noi18n +endif +# deprecation_warnings=on +ifeq ($(deprecationwarnings), on) + GYPFLAGS += -Dv8_deprecation_warnings=1 +endif +# asan=/path/to/clang++ +ifneq ($(strip $(asan)),) + GYPFLAGS += -Dasan=1 + export CXX=$(asan) + export CXX_host=$(asan) + export LINK=$(asan) + export ASAN_SYMBOLIZER_PATH="$(dir $(asan))llvm-symbolizer" +endif + +# arm specific flags. +# arm_version=<number | "default"> +ifneq ($(strip $(arm_version)),) + GYPFLAGS += -Darm_version=$(arm_version) +else +# Deprecated (use arm_version instead): armv7=false/true +ifeq ($(armv7), false) + GYPFLAGS += -Darm_version=6 +else +ifeq ($(armv7), true) + GYPFLAGS += -Darm_version=7 +endif +endif +endif +# hardfp=on/off. Deprecated, use armfloatabi +ifeq ($(hardfp),on) + GYPFLAGS += -Darm_float_abi=hard +else +ifeq ($(hardfp),off) + GYPFLAGS += -Darm_float_abi=softfp +endif +endif +# fpu: armfpu=xxx +# xxx: vfp, vfpv3-d16, vfpv3, neon. +ifeq ($(armfpu),) + GYPFLAGS += -Darm_fpu=default +else + GYPFLAGS += -Darm_fpu=$(armfpu) +endif +# float abi: armfloatabi=softfp/hard +ifeq ($(armfloatabi),) +ifeq ($(hardfp),) + GYPFLAGS += -Darm_float_abi=default +endif +else + GYPFLAGS += -Darm_float_abi=$(armfloatabi) +endif +# armthumb=on/off +ifeq ($(armthumb), off) + GYPFLAGS += -Darm_thumb=0 +else +ifeq ($(armthumb), on) + GYPFLAGS += -Darm_thumb=1 +endif +endif +# arm_test_noprobe=on +# With this flag set, by default v8 will only use features implied +# by the compiler (no probe). This is done by modifying the default +# values of enable_armv7, enable_vfp3, enable_32dregs and enable_neon. +# Modifying these flags when launching v8 will enable the probing for +# the specified values. +ifeq ($(arm_test_noprobe), on) + GYPFLAGS += -Darm_test_noprobe=on +endif + +# ----------------- available targets: -------------------- +# - "builddeps": pulls in external dependencies for building +# - "dependencies": pulls in all external dependencies +# - "grokdump": rebuilds heap constants lists used by grokdump +# - any arch listed in ARCHES (see below) +# - any mode listed in MODES +# - every combination <arch>.<mode>, e.g. "ia32.release" +# - "native": current host's architecture, release mode +# - any of the above with .check appended, e.g. "ia32.release.check" +# - "android": cross-compile for Android/ARM +# - "nacl" : cross-compile for Native Client (ia32 and x64) +# - default (no target specified): build all DEFAULT_ARCHES and MODES +# - "check": build all targets and run all tests +# - "<arch>.clean" for any <arch> in ARCHES +# - "clean": clean all ARCHES + +# ----------------- internal stuff ------------------------ + +# Architectures and modes to be compiled. Consider these to be internal +# variables, don't override them (use the targets instead). +ARCHES = ia32 x64 x32 arm arm64 mips mipsel mips64el x87 +DEFAULT_ARCHES = ia32 x64 arm +MODES = release debug optdebug +DEFAULT_MODES = release debug +ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel android_x87 +NACL_ARCHES = nacl_ia32 nacl_x64 + +# List of files that trigger Makefile regeneration: +GYPFILES = build/all.gyp build/features.gypi build/standalone.gypi \ + build/toolchain.gypi samples/samples.gyp src/compiler/compiler.gyp \ + src/d8.gyp test/cctest/cctest.gyp tools/gyp/v8.gyp + +# If vtunejit=on, the v8vtune.gyp will be appended. +ifeq ($(vtunejit), on) + GYPFILES += src/third_party/vtune/v8vtune.gyp +endif +# Generates all combinations of ARCHES and MODES, e.g. "ia32.release". +BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES))) +ANDROID_BUILDS = $(foreach mode,$(MODES), \ + $(addsuffix .$(mode),$(ANDROID_ARCHES))) +NACL_BUILDS = $(foreach mode,$(MODES), \ + $(addsuffix .$(mode),$(NACL_ARCHES))) +# Generates corresponding test targets, e.g. "ia32.release.check". +CHECKS = $(addsuffix .check,$(BUILDS)) +QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS)) +ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS)) +NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS)) +# File where previously used GYPFLAGS are stored. +ENVFILE = $(OUTDIR)/environment + +.PHONY: all check clean builddeps dependencies $(ENVFILE).new native \ + qc quickcheck $(QUICKCHECKS) \ + $(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \ + $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \ + $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \ + $(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \ + must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \ + $(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \ + must-set-NACL_SDK_ROOT + +# Target definitions. "all" is the default. +all: $(DEFAULT_MODES) + +# Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile +# having been created before. +buildbot: + $(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \ + builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)" + +# Compile targets. MODES and ARCHES are convenience targets. +.SECONDEXPANSION: +$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES)) + +$(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES)) + +# Defines how to build a particular target (e.g. ia32.release). +$(BUILDS): $(OUTDIR)/Makefile.$$@ + @$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \ + CXX="$(CXX)" LINK="$(LINK)" \ + BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \ + python -c "print \ + raw_input().replace('opt', '').capitalize()") \ + builddir="$(shell pwd)/$(OUTDIR)/$@" + +native: $(OUTDIR)/Makefile.native + @$(MAKE) -C "$(OUTDIR)" -f Makefile.native \ + CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \ + builddir="$(shell pwd)/$(OUTDIR)/$@" + +$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES)) + +$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \ + must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android + @$(MAKE) -f Makefile.android $@ \ + ARCH="$(basename $@)" \ + MODE="$(subst .,,$(suffix $@))" \ + OUTDIR="$(OUTDIR)" \ + GYPFLAGS="$(GYPFLAGS)" + +$(NACL_ARCHES): $(addprefix $$@.,$(MODES)) + +$(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \ + Makefile.nacl must-set-NACL_SDK_ROOT + @$(MAKE) -f Makefile.nacl $@ \ + ARCH="$(basename $@)" \ + MODE="$(subst .,,$(suffix $@))" \ + OUTDIR="$(OUTDIR)" \ + GYPFLAGS="$(GYPFLAGS)" + +# Test targets. +check: all + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \ + $(TESTFLAGS) + +$(addsuffix .check,$(MODES)): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --mode=$(basename $@) $(TESTFLAGS) + +$(addsuffix .check,$(ARCHES)): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch=$(basename $@) $(TESTFLAGS) + +$(CHECKS): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(basename $@) $(TESTFLAGS) + +$(addsuffix .quickcheck,$(MODES)): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --mode=$(basename $@) $(TESTFLAGS) --quickcheck + +$(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch=$(basename $@) $(TESTFLAGS) --quickcheck + +$(QUICKCHECKS): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck + +$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@) + @tools/android-sync.sh $(basename $@) $(OUTDIR) \ + $(shell pwd) $(ANDROID_V8) + +$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(basename $@) \ + --timeout=600 \ + --command-prefix="tools/android-run.py" $(TESTFLAGS) + +$(addsuffix .check, $(ANDROID_ARCHES)): \ + $(addprefix $$(basename $$@).,$(MODES)).check + +$(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@) + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(basename $@) \ + --timeout=600 --nopresubmit --noi18n \ + --command-prefix="tools/nacl-run.py" + +$(addsuffix .check, $(NACL_ARCHES)): \ + $(addprefix $$(basename $$@).,$(MODES)).check + +native.check: native + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \ + --arch-and-mode=. $(TESTFLAGS) + +SUPERFASTTESTMODES = ia32.release +FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release +FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug + +COMMA = , +EMPTY = +SPACE = $(EMPTY) $(EMPTY) +quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES)) + tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \ + --download-data mozilla webkit + tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck +qc: quickcheck + +# Clean targets. You can clean each architecture individually, or everything. +$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)): + rm -f $(OUTDIR)/Makefile.$(basename $@)* + rm -rf $(OUTDIR)/$(basename $@).release + rm -rf $(OUTDIR)/$(basename $@).debug + rm -rf $(OUTDIR)/$(basename $@).optdebug + find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete + +native.clean: + rm -f $(OUTDIR)/Makefile.native + rm -rf $(OUTDIR)/native + find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete + +clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean gtags.clean + +# GYP file generation targets. +OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS)) +$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE) + $(eval CXX_TARGET_ARCH:=$(shell $(CXX) -v 2>&1 | grep ^Target: | \ + cut -f 2 -d " " | cut -f 1 -d "-" )) + $(eval CXX_TARGET_ARCH:=$(subst aarch64,arm64,$(CXX_TARGET_ARCH))) + $(eval V8_TARGET_ARCH:=$(subst .,,$(suffix $(basename $@)))) + PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(shell pwd)/build:$(PYTHONPATH):$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \ + GYP_GENERATORS=make \ + build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ + -Ibuild/standalone.gypi --depth=. \ + -Dv8_target_arch=$(V8_TARGET_ARCH) \ + $(if $(findstring $(CXX_TARGET_ARCH),$(V8_TARGET_ARCH)), \ + -Dtarget_arch=$(V8_TARGET_ARCH),) \ + $(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \ + -S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS) + +$(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE) + PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(shell pwd)/build:$(PYTHONPATH):$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \ + GYP_GENERATORS=make \ + build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ + -Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS) + +must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN: +ifndef ANDROID_NDK_ROOT +ifndef ANDROID_TOOLCHAIN + $(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set)) +endif +endif + +# Note that NACL_SDK_ROOT must be set to point to an appropriate +# Native Client SDK before using this makefile. You can download +# an SDK here: +# https://developers.google.com/native-client/sdk/download +# The path indicated by NACL_SDK_ROOT will typically end with +# a folder for a pepper version such as "pepper_25" that should +# have "tools" and "toolchain" subdirectories. +must-set-NACL_SDK_ROOT: +ifndef NACL_SDK_ROOT + $(error NACL_SDK_ROOT must be set) +endif + +# Replaces the old with the new environment file if they're different, which +# will trigger GYP to regenerate Makefiles. +$(ENVFILE): $(ENVFILE).new + @if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \ + then rm $(ENVFILE).new; \ + else mv $(ENVFILE).new $(ENVFILE); fi + +# Stores current GYPFLAGS in a file. +$(ENVFILE).new: + @mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \ + echo "CXX=$(CXX)" >> $(ENVFILE).new + +# Heap constants for grokdump. +DUMP_FILE = tools/v8heapconst.py +grokdump: ia32.release + @cat $(DUMP_FILE).tmpl > $(DUMP_FILE) + @$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE) + +# Support for the GNU GLOBAL Source Code Tag System. +gtags.files: $(GYPFILES) $(ENVFILE) + @find include src test -name '*.h' -o -name '*.cc' -o -name '*.c' > $@ + +# We need to manually set the stack limit here, to work around bugs in +# gmake-3.81 and global-5.7.1 on recent 64-bit Linux systems. +GPATH GRTAGS GSYMS GTAGS: gtags.files $(shell cat gtags.files 2> /dev/null) + @bash -c 'ulimit -s 10240 && GTAGSFORCECPP=yes gtags -i -q -f $<' + +gtags.clean: + rm -f gtags.files GPATH GRTAGS GSYMS GTAGS + +# Dependencies. "builddeps" are dependencies required solely for building, +# "dependencies" includes also dependencies required for development. +# Remember to keep these in sync with the DEPS file. +builddeps: + svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \ + --revision 1831 + if svn info third_party/icu 2>&1 | grep -q icu46 ; then \ + svn switch --force \ + https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \ + third_party/icu --revision 277999 ; \ + else \ + svn checkout --force \ + https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \ + third_party/icu --revision 277999 ; \ + fi + svn checkout --force http://googletest.googlecode.com/svn/trunk \ + testing/gtest --revision 692 + svn checkout --force http://googlemock.googlecode.com/svn/trunk \ + testing/gmock --revision 485 + +dependencies: builddeps + # The spec is a copy of the hooks in v8's DEPS file. + gclient sync -r fb782d4369d5ae04f17a2fceef7de5a63e50f07b --spec="solutions = [{u'managed': False, u'name': u'buildtools', u'url': u'https://chromium.googlesource.com/chromium/buildtools.git', u'custom_deps': {}, u'custom_hooks': [{u'name': u'clang_format_win',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=win32',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/win/clang-format.exe.sha1']},{u'name': u'clang_format_mac',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=darwin',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/mac/clang-format.sha1']},{u'name': u'clang_format_linux',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=linux*',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/linux64/clang-format.sha1']}],u'deps_file': u'.DEPS.git', u'safesync_url': u''}]" |