/* nasm.h main header file for the Netwide Assembler: inter-module interface * * The Netwide Assembler is copyright (C) 1996 Simon Tatham and * Julian Hall. All rights reserved. The software is * redistributable under the licence given in the file "Licence" * distributed in the NASM archive. * * initial version: 27/iii/95 by Simon Tatham */ #ifndef NASM_NASM_H #define NASM_NASM_H #define NASM_MAJOR_VER 0 #define NASM_MINOR_VER 98 #define NASM_VER "0.98.09" #ifndef NULL #define NULL 0 #endif #ifndef FALSE #define FALSE 0 /* comes in handy */ #endif #ifndef TRUE #define TRUE 1 #endif #define NO_SEG -1L /* null segment value */ #define SEG_ABS 0x40000000L /* mask for far-absolute segments */ #ifndef FILENAME_MAX #define FILENAME_MAX 256 #endif #ifndef PREFIX_MAX #define PREFIX_MAX 10 #endif #ifndef POSTFIX_MAX #define POSTFIX_MAX 10 #endif /* * Name pollution problems: on Digital UNIX pulls in some * strange hardware header file which sees fit to define R_SP. We * undefine it here so as not to break the enum below. */ #ifdef R_SP #undef R_SP #endif /* * We must declare the existence of this structure type up here, * since we have to reference it before we define it... */ struct ofmt; /* * ------------------------- * Error reporting functions * ------------------------- */ /* * An error reporting function should look like this. */ typedef void (*efunc) (int severity, char *fmt, ...); /* * These are the error severity codes which get passed as the first * argument to an efunc. */ #define ERR_DEBUG 0x00000008 /* put out debugging message */ #define ERR_WARNING 0x00000000 /* warn only: no further action */ #define ERR_NONFATAL 0x00000001 /* terminate assembly after phase */ #define ERR_FATAL 0x00000002 /* instantly fatal: exit with error */ #define ERR_PANIC 0x00000003 /* internal error: panic instantly * and dump core for reference */ #define ERR_MASK 0x0000000F /* mask off the above codes */ #define ERR_NOFILE 0x00000010 /* don't give source file name/line */ #define ERR_USAGE 0x00000020 /* print a usage message */ #define ERR_PASS1 0x00000040 /* only print this error on pass one */ /* * These codes define specific types of suppressible warning. */ #define ERR_WARN_MASK 0x0000FF00 /* the mask for this feature */ #define ERR_WARN_SHR 8 /* how far to shift right */ #define ERR_WARN_MNP 0x00000100 /* macro-num-parameters warning */ #define ERR_WARN_MSR 0x00000200 /* macro self-reference */ #define ERR_WARN_OL 0x00000300 /* orphan label (no colon, and * alone on line) */ #define ERR_WARN_NOV 0x00000400 /* numeric overflow */ #define ERR_WARN_MAX 4 /* the highest numbered one */ /* * ----------------------- * Other function typedefs * ----------------------- */ /* * A label-lookup function should look like this. */ typedef int (*lfunc) (char *label, long *segment, long *offset); /* * And a label-definition function like this. The boolean parameter * `is_norm' states whether the label is a `normal' label (which * should affect the local-label system), or something odder like * an EQU or a segment-base symbol, which shouldn't. */ typedef void (*ldfunc) (char *label, long segment, long offset, char *special, int is_norm, int isextrn, struct ofmt *ofmt, efunc error); /* * List-file generators should look like this: */ typedef struct { /* * Called to initialise the listing file generator. Before this * is called, the other routines will silently do nothing when * called. The `char *' parameter is the file name to write the * listing to. */ void (*init) (char *, efunc); /* * Called to clear stuff up and close the listing file. */ void (*cleanup) (void); /* * Called to output binary data. Parameters are: the offset; * the data; the data type. Data types are similar to the * output-format interface, only OUT_ADDRESS will _always_ be * displayed as if it's relocatable, so ensure that any non- * relocatable address has been converted to OUT_RAWDATA by * then. Note that OUT_RAWDATA+0 is a valid data type, and is a * dummy call used to give the listing generator an offset to * work with when doing things like uplevel(LIST_TIMES) or * uplevel(LIST_INCBIN). */ void (*output) (long, void *, unsigned long); /* * Called to send a text line to the listing generator. The * `int' parameter is LIST_READ or LIST_MACRO depending on * whether the line came directly from an input file or is the * result of a multi-line macro expansion. */ void (*line) (int, char *); /* * Called to change one of the various levelled mechanisms in * the listing generator. LIST_INCLUDE and LIST_MACRO can be * used to increase the nesting level of include files and * macro expansions; LIST_TIMES and LIST_INCBIN switch on the * two binary-output-suppression mechanisms for large-scale * pseudo-instructions. * * LIST_MACRO_NOLIST is synonymous with LIST_MACRO except that * it indicates the beginning of the expansion of a `nolist' * macro, so anything under that level won't be expanded unless * it includes another file. */ void (*uplevel) (int); /* * Reverse the effects of uplevel. */ void (*downlevel) (int); } ListGen; /* * The expression evaluator must be passed a scanner function; a * standard scanner is provided as part of nasmlib.c. The * preprocessor will use a different one. Scanners, and the * token-value structures they return, look like this. * * The return value from the scanner is always a copy of the * `t_type' field in the structure. */ struct tokenval { int t_type; long t_integer, t_inttwo; char *t_charptr; }; typedef int (*scanner) (void *private_data, struct tokenval *tv); /* * Token types returned by the scanner, in addition to ordinary * ASCII character values, and zero for end-of-string. */ enum { /* token types, other than chars */ TOKEN_INVALID = -1, /* a placeholder value */ TOKEN_EOS = 0, /* end of string */ TOKEN_EQ = '=', TOKEN_GT = '>', TOKEN_LT = '<', /* aliases */ TOKEN_ID = 256, TOKEN_NUM, TOKEN_REG, TOKEN_INSN, /* major token types */ TOKEN_ERRNUM, /* numeric constant with error in */ TOKEN_HERE, TOKEN_BASE, /* $ and $$ */ TOKEN_SPECIAL, /* BYTE, WORD, DWORD, FAR, NEAR, etc */ TOKEN_PREFIX, /* A32, O16, LOCK, REPNZ, TIMES, etc */ TOKEN_SHL, TOKEN_SHR, /* << and >> */ TOKEN_SDIV, TOKEN_SMOD, /* // and %% */ TOKEN_GE, TOKEN_LE, TOKEN_NE, /* >=, <= and <> (!= is same as <>) */ TOKEN_DBL_AND, TOKEN_DBL_OR, TOKEN_DBL_XOR, /* &&, || and ^^ */ TOKEN_SEG, TOKEN_WRT, /* SEG and WRT */ TOKEN_FLOAT /* floating-point constant */ }; typedef struct { long segment; long offset; int known; } loc_t; /* * Expression-evaluator datatype. Expressions, within the * evaluator, are stored as an array of these beasts, terminated by * a record with type==0. Mostly, it's a vector type: each type * denotes some kind of a component, and the value denotes the * multiple of that component present in the expression. The * exception is the WRT type, whose `value' field denotes the * segment to which the expression is relative. These segments will * be segment-base types, i.e. either odd segment values or SEG_ABS * types. So it is still valid to assume that anything with a * `value' field of zero is insignificant. */ typedef struct { long type; /* a register, or EXPR_xxx */ long value; /* must be >= 32 bits */ } expr; /* * The evaluator can also return hints about which of two registers * used in an expression should be the base register. See also the * `operand' structure. */ struct eval_hints { int base; int type; }; /* * The actual expression evaluator function looks like this. When * called, it expects the first token of its expression to already * be in `*tv'; if it is not, set tv->t_type to TOKEN_INVALID and * it will start by calling the scanner. * * If a forward reference happens during evaluation, the evaluator * must set `*fwref' to TRUE if `fwref' is non-NULL. * * `critical' is non-zero if the expression may not contain forward * references. The evaluator will report its own error if this * occurs; if `critical' is 1, the error will be "symbol not * defined before use", whereas if `critical' is 2, the error will * be "symbol undefined". * * If `critical' has bit 8 set (in addition to its main value: 0x101 * and 0x102 correspond to 1 and 2) then an extended expression * syntax is recognised, in which relational operators such as =, < * and >= are accepted, as well as low-precedence logical operators * &&, ^^ and ||. * * If `hints' is non-NULL, it gets filled in with some hints as to * the base register in complex effective addresses. */ #define CRITICAL 0x100 typedef expr *(*evalfunc) (scanner sc, void *scprivate, struct tokenval *tv, int *fwref, int critical, efunc error, struct eval_hints *hints); /* * Special values for expr->type. ASSUMPTION MADE HERE: the number * of distinct register names (i.e. possible "type" fields for an * expr structure) does not exceed 124 (EXPR_REG_START through * EXPR_REG_END). */ #define EXPR_REG_START 1 #define EXPR_REG_END 124 #define EXPR_UNKNOWN 125L /* for forward references */ #define EXPR_SIMPLE 126L #define EXPR_WRT 127L #define EXPR_SEGBASE 128L /* * Preprocessors ought to look like this: */ typedef struct { /* * Called at the start of a pass; given a file name, the number * of the pass, an error reporting function, an evaluator * function, and a listing generator to talk to. */ void (*reset) (char *, int, efunc, evalfunc, ListGen *); /* * Called to fetch a line of preprocessed source. The line * returned has been malloc'ed, and so should be freed after * use. */ char *(*getline) (void); /* * Called at the end of a pass. */ void (*cleanup) (void); } Preproc; /* * ---------------------------------------------------------------- * Some lexical properties of the NASM source language, included * here because they are shared between the parser and preprocessor * ---------------------------------------------------------------- */ /* * isidstart matches any character that may start an identifier, and isidchar * matches any character that may appear at places other than the start of an * identifier. E.g. a period may only appear at the start of an identifier * (for local labels), whereas a number may appear anywhere *but* at the * start. */ #define isidstart(c) ( isalpha(c) || (c)=='_' || (c)=='.' || (c)=='?' \ || (c)=='@' ) #define isidchar(c) ( isidstart(c) || isdigit(c) || (c)=='$' || (c)=='#' \ || (c)=='~' ) /* Ditto for numeric constants. */ #define isnumstart(c) ( isdigit(c) || (c)=='$' ) #define isnumchar(c) ( isalnum(c) ) /* This returns the numeric value of a given 'digit'. */ #define numvalue(c) ((c)>='a' ? (c)-'a'+10 : (c)>='A' ? (c)-'A'+10 : (c)-'0') /* * Data-type flags that get passed to listing-file routines. */ enum { LIST_READ, LIST_MACRO, LIST_MACRO_NOLIST, LIST_INCLUDE, LIST_INCBIN, LIST_TIMES }; /* * ----------------------------------------------------------- * Format of the `insn' structure returned from `parser.c' and * passed into `assemble.c' * ----------------------------------------------------------- */ /* * Here we define the operand types. These are implemented as bit * masks, since some are subsets of others; e.g. AX in a MOV * instruction is a special operand type, whereas AX in other * contexts is just another 16-bit register. (Also, consider CL in * shift instructions, DX in OUT, etc.) */ /* size, and other attributes, of the operand */ #define BITS8 0x00000001L #define BITS16 0x00000002L #define BITS32 0x00000004L #define BITS64 0x00000008L /* FPU only */ #define BITS80 0x00000010L /* FPU only */ #define FAR 0x00000020L /* grotty: this means 16:16 or */ /* 16:32, like in CALL/JMP */ #define NEAR 0x00000040L #define SHORT 0x00000080L /* and this means what it says :) */ #define SIZE_MASK 0x000000FFL /* all the size attributes */ #define NON_SIZE (~SIZE_MASK) #define TO 0x00000100L /* reverse effect in FADD, FSUB &c */ #define COLON 0x00000200L /* operand is followed by a colon */ /* type of operand: memory reference, register, etc. */ #define MEMORY 0x00204000L #define REGISTER 0x00001000L /* register number in 'basereg' */ #define IMMEDIATE 0x00002000L #define REGMEM 0x00200000L /* for r/m, ie EA, operands */ #define REGNORM 0x00201000L /* 'normal' reg, qualifies as EA */ #define REG8 0x00201001L #define REG16 0x00201002L #define REG32 0x00201004L #define MMXREG 0x00201008L /* MMX registers */ #define XMMREG 0x00201010L /* XMM Katmai reg */ #define FPUREG 0x01000000L /* floating point stack registers */ #define FPU0 0x01000800L /* FPU stack register zero */ /* special register operands: these may be treated differently */ #define REG_SMASK 0x00070000L /* a mask for the following */ #define REG_ACCUM 0x00211000L /* accumulator: AL, AX or EAX */ #define REG_AL 0x00211001L /* REG_ACCUM | BITSxx */ #define REG_AX 0x00211002L /* ditto */ #define REG_EAX 0x00211004L /* and again */ #define REG_COUNT 0x00221000L /* counter: CL, CX or ECX */ #define REG_CL 0x00221001L /* REG_COUNT | BITSxx */ #define REG_CX 0x00221002L /* ditto */ #define REG_ECX 0x00221004L /* another one */ #define REG_DX 0x00241002L #define REG_SREG 0x00081002L /* any segment register */ #define REG_CS 0x01081002L /* CS */ #define REG_DESS 0x02081002L /* DS, ES, SS (non-CS 86 registers) */ #define REG_FSGS 0x04081002L /* FS, GS (386 extended registers) */ #define REG_CDT 0x00101004L /* CRn, DRn and TRn */ #define REG_CREG 0x08101004L /* CRn */ #define REG_CR4 0x08101404L /* CR4 (Pentium only) */ #define REG_DREG 0x10101004L /* DRn */ #define REG_TREG 0x20101004L /* TRn */ /* special type of EA */ #define MEM_OFFS 0x00604000L /* simple [address] offset */ /* special type of immediate operand */ #define ONENESS 0x00800000L /* so UNITY == IMMEDIATE | ONENESS */ #define UNITY 0x00802000L /* for shift/rotate instructions */ #define BYTENESS 0x80000000L /* so SBYTE == IMMEDIATE | BYTENESS */ #define SBYTE 0x80002000L /* for op r16/32,immediate instrs. */ /* * Next, the codes returned from the parser, for registers and * instructions. */ enum { /* register names */ R_AH = EXPR_REG_START, R_AL, R_AX, R_BH, R_BL, R_BP, R_BX, R_CH, R_CL, R_CR0, R_CR2, R_CR3, R_CR4, R_CS, R_CX, R_DH, R_DI, R_DL, R_DR0, R_DR1, R_DR2, R_DR3, R_DR6, R_DR7, R_DS, R_DX, R_EAX, R_EBP, R_EBX, R_ECX, R_EDI, R_EDX, R_ES, R_ESI, R_ESP, R_FS, R_GS, R_MM0, R_MM1, R_MM2, R_MM3, R_MM4, R_MM5, R_MM6, R_MM7, R_SI, R_SP, R_SS, R_ST0, R_ST1, R_ST2, R_ST3, R_ST4, R_ST5, R_ST6, R_ST7, R_TR3, R_TR4, R_TR5, R_TR6, R_TR7, R_XMM0, R_XMM1, R_XMM2, R_XMM3, R_XMM4, R_XMM5, R_XMM6, R_XMM7, REG_ENUM_LIMIT }; /* Instruction names automatically generated from insns.dat */ #include "insnsi.h" /* max length of any instruction, register name etc. */ #if MAX_INSLEN > 9 #define MAX_KEYWORD MAX_INSLEN #else #define MAX_KEYWORD 9 #endif enum { /* condition code names */ C_A, C_AE, C_B, C_BE, C_C, C_E, C_G, C_GE, C_L, C_LE, C_NA, C_NAE, C_NB, C_NBE, C_NC, C_NE, C_NG, C_NGE, C_NL, C_NLE, C_NO, C_NP, C_NS, C_NZ, C_O, C_P, C_PE, C_PO, C_S, C_Z }; /* * Note that because segment registers may be used as instruction * prefixes, we must ensure the enumerations for prefixes and * register names do not overlap. */ enum { /* instruction prefixes */ PREFIX_ENUM_START = REG_ENUM_LIMIT, P_A16 = PREFIX_ENUM_START, P_A32, P_LOCK, P_O16, P_O32, P_REP, P_REPE, P_REPNE, P_REPNZ, P_REPZ, P_TIMES }; enum { /* extended operand types */ EOT_NOTHING, EOT_DB_STRING, EOT_DB_NUMBER }; enum { /* special EA flags */ EAF_BYTEOFFS = 1, /* force offset part to byte size */ EAF_WORDOFFS = 2, /* force offset part to [d]word size */ EAF_TIMESTWO = 4 /* really do EAX*2 not EAX+EAX */ }; enum { /* values for `hinttype' */ EAH_NOHINT = 0, /* no hint at all - our discretion */ EAH_MAKEBASE = 1, /* try to make given reg the base */ EAH_NOTBASE = 2 /* try _not_ to make reg the base */ }; typedef struct { /* operand to an instruction */ long type; /* type of operand */ int addr_size; /* 0 means default; 16; 32 */ int basereg, indexreg, scale; /* registers and scale involved */ int hintbase, hinttype; /* hint as to real base register */ long segment; /* immediate segment, if needed */ long offset; /* any immediate number */ long wrt; /* segment base it's relative to */ int eaflags; /* special EA flags */ int opflags; /* see OPFLAG_* defines below */ } operand; #define OPFLAG_FORWARD 1 /* operand is a forward reference */ #define OPFLAG_EXTERN 2 /* operand is an external reference */ typedef struct extop { /* extended operand */ struct extop *next; /* linked list */ long type; /* defined above */ char *stringval; /* if it's a string, then here it is */ int stringlen; /* ... and here's how long it is */ long segment; /* if it's a number/address, then... */ long offset; /* ... it's given here ... */ long wrt; /* ... and here */ } extop; #define MAXPREFIX 4 typedef struct { /* an instruction itself */ char *label; /* the label defined, or NULL */ int prefixes[MAXPREFIX]; /* instruction prefixes, if any */ int nprefix; /* number of entries in above */ int opcode; /* the opcode - not just the string */ int condition; /* the condition code, if Jcc/SETcc */ int operands; /* how many operands? 0-3 * (more if db et al) */ operand oprs[3]; /* the operands, defined as above */ extop *eops; /* extended operands */ int eops_float; /* true if DD and floating */ long times; /* repeat count (TIMES prefix) */ int forw_ref; /* is there a forward reference? */ } insn; enum geninfo { GI_SWITCH }; /* * ------------------------------------------------------------ * The data structure defining an output format driver, and the * interfaces to the functions therein. * ------------------------------------------------------------ */ struct ofmt { /* * This is a short (one-liner) description of the type of * output generated by the driver. */ char *fullname; /* * This is a single keyword used to select the driver. */ char *shortname; /* * this is reserved for out module specific help. * It is set to NULL in all the out modules but is not implemented * in the main program */ char *helpstring; /* * this is a pointer to the first element of the debug information */ struct dfmt **debug_formats; /* * and a pointer to the element that is being used * note: this is set to the default at compile time and changed if the * -F option is selected. If developing a set of new debug formats for * an output format, be sure to set this to whatever default you want * */ struct dfmt *current_dfmt; /* * This, if non-NULL, is a NULL-terminated list of `char *'s * pointing to extra standard macros supplied by the object * format (e.g. a sensible initial default value of __SECT__, * and user-level equivalents for any format-specific * directives). */ char **stdmac; /* * This procedure is called at the start of an output session. * It tells the output format what file it will be writing to, * what routine to report errors through, and how to interface * to the label manager and expression evaluator if necessary. * It also gives it a chance to do other initialisation. */ void (*init) (FILE *fp, efunc error, ldfunc ldef, evalfunc eval); /* * This procedure is called to pass generic information to the * object file. The first parameter gives the information type * (currently only command line switches) * and the second parameter gives the value. This function returns * 1 if recognized, 0 if unrecognized */ int (*setinfo)(enum geninfo type, char **string); /* * This procedure is called by assemble() to write actual * generated code or data to the object file. Typically it * doesn't have to actually _write_ it, just store it for * later. * * The `type' argument specifies the type of output data, and * usually the size as well: its contents are described below. */ void (*output) (long segto, void *data, unsigned long type, long segment, long wrt); /* * This procedure is called once for every symbol defined in * the module being assembled. It gives the name and value of * the symbol, in NASM's terms, and indicates whether it has * been declared to be global. Note that the parameter "name", * when passed, will point to a piece of static storage * allocated inside the label manager - it's safe to keep using * that pointer, because the label manager doesn't clean up * until after the output driver has. * * Values of `is_global' are: 0 means the symbol is local; 1 * means the symbol is global; 2 means the symbol is common (in * which case `offset' holds the _size_ of the variable). * Anything else is available for the output driver to use * internally. * * This routine explicitly _is_ allowed to call the label * manager to define further symbols, if it wants to, even * though it's been called _from_ the label manager. That much * re-entrancy is guaranteed in the label manager. However, the * label manager will in turn call this routine, so it should * be prepared to be re-entrant itself. * * The `special' parameter contains special information passed * through from the command that defined the label: it may have * been an EXTERN, a COMMON or a GLOBAL. The distinction should * be obvious to the output format from the other parameters. */ void (*symdef) (char *name, long segment, long offset, int is_global, char *special); /* * This procedure is called when the source code requests a * segment change. It should return the corresponding segment * _number_ for the name, or NO_SEG if the name is not a valid * segment name. * * It may also be called with NULL, in which case it is to * return the _default_ section number for starting assembly in. * * It is allowed to modify the string it is given a pointer to. * * It is also allowed to specify a default instruction size for * the segment, by setting `*bits' to 16 or 32. Or, if it * doesn't wish to define a default, it can leave `bits' alone. */ long (*section) (char *name, int pass, int *bits); /* * This procedure is called to modify the segment base values * returned from the SEG operator. It is given a segment base * value (i.e. a segment value with the low bit set), and is * required to produce in return a segment value which may be * different. It can map segment bases to absolute numbers by * means of returning SEG_ABS types. * * It should return NO_SEG if the segment base cannot be * determined; the evaluator (which calls this routine) is * responsible for throwing an error condition if that occurs * in pass two or in a critical expression. */ long (*segbase) (long segment); /* * This procedure is called to allow the output driver to * process its own specific directives. When called, it has the * directive word in `directive' and the parameter string in * `value'. It is called in both assembly passes, and `pass' * will be either 1 or 2. * * This procedure should return zero if it does not _recognise_ * the directive, so that the main program can report an error. * If it recognises the directive but then has its own errors, * it should report them itself and then return non-zero. It * should also return non-zero if it correctly processes the * directive. */ int (*directive) (char *directive, char *value, int pass); /* * This procedure is called before anything else - even before * the "init" routine - and is passed the name of the input * file from which this output file is being generated. It * should return its preferred name for the output file in * `outname', if outname[0] is not '\0', and do nothing to * `outname' otherwise. Since it is called before the driver is * properly initialised, it has to be passed its error handler * separately. * * This procedure may also take its own copy of the input file * name for use in writing the output file: it is _guaranteed_ * that it will be called before the "init" routine. * * The parameter `outname' points to an area of storage * guaranteed to be at least FILENAME_MAX in size. */ void (*filename) (char *inname, char *outname, efunc error); /* * This procedure is called after assembly finishes, to allow * the output driver to clean itself up and free its memory. * Typically, it will also be the point at which the object * file actually gets _written_. * * One thing the cleanup routine should always do is to close * the output file pointer. */ void (*cleanup) (int debuginfo); }; /* * values for the `type' parameter to an output function. Each one * must have the actual number of _bytes_ added to it. * * Exceptions are OUT_RELxADR, which denote an x-byte relocation * which will be a relative jump. For this we need to know the * distance in bytes from the start of the relocated record until * the end of the containing instruction. _This_ is what is stored * in the size part of the parameter, in this case. * * Also OUT_RESERVE denotes reservation of N bytes of BSS space, * and the contents of the "data" parameter is irrelevant. * * The "data" parameter for the output function points to a "long", * containing the address in question, unless the type is * OUT_RAWDATA, in which case it points to an "unsigned char" * array. */ #define OUT_RAWDATA 0x00000000UL #define OUT_ADDRESS 0x10000000UL #define OUT_REL2ADR 0x20000000UL #define OUT_REL4ADR 0x30000000UL #define OUT_RESERVE 0x40000000UL #define OUT_TYPMASK 0xF0000000UL #define OUT_SIZMASK 0x0FFFFFFFUL /* * ------------------------------------------------------------ * The data structure defining a debug format driver, and the * interfaces to the functions therein. * ------------------------------------------------------------ */ struct dfmt { /* * This is a short (one-liner) description of the type of * output generated by the driver. */ char *fullname; /* * This is a single keyword used to select the driver. */ char *shortname; /* * init - called initially to set up local pointer to object format, * void pointer to implementation defined data, file pointer (which * probably won't be used, but who knows?), and error function. */ void (*init) (struct ofmt * of, void * id, FILE * fp, efunc error); /* * linenum - called any time there is output with a change of * line number or file. */ void (*linenum) (const char * filename, long linenumber, long segto); /* * debug_deflabel - called whenever a label is defined. Parameters * are the same as to 'symdef()' in the output format. This function * would be called before the output format version. */ void (*debug_deflabel) (char * name, long segment, long offset, int is_global, char * special); /* * debug_directive - called whenever a DEBUG directive other than 'LINE' * is encountered. 'directive' contains the first parameter to the * DEBUG directive, and params contains the rest. For example, * 'DEBUG VAR _somevar:int' would translate to a call to this * function with 'directive' equal to "VAR" and 'params' equal to * "_somevar:int". */ void (*debug_directive) (const char * directive, const char * params); /* * typevalue - called whenever the assembler wishes to register a type * for the last defined label. This routine MUST detect if a type was * already registered and not re-register it. */ void (*debug_typevalue) (long type); /* * debug_output - called whenever output is required * 'type' is the type of info required, and this is format-specific */ void (*debug_output) (int type, void *param); /* * cleanup - called after processing of file is complete */ void (*cleanup) (void); }; /* * The type definition macros * for debugging * * low 3 bits: reserved * next 5 bits: type * next 24 bits: number of elements for arrays (0 for labels) */ #define TY_UNKNOWN 0x00 #define TY_LABEL 0x08 #define TY_BYTE 0x10 #define TY_WORD 0x18 #define TY_DWORD 0x20 #define TY_FLOAT 0x28 #define TY_QWORD 0x30 #define TY_TBYTE 0x38 #define TY_COMMON 0xE0 #define TY_SEG 0xE8 #define TY_EXTERN 0xF0 #define TY_EQU 0xF8 #define TYM_TYPE(x) ((x) & 0xF8) #define TYM_ELEMENTS(x) (((x) & 0xFFFFFF00) >> 8) #define TYS_ELEMENTS(x) ((x) << 8) /* * ----- * Other * ----- */ /* * This is a useful #define which I keep meaning to use more often: * the number of elements of a statically defined array. */ #define elements(x) ( sizeof(x) / sizeof(*(x)) ) extern int tasm_compatible_mode; /* * This declaration passes the "pass" number to all other modules * "pass0" assumes the values: 0, 0, ..., 0, 1, 2 * where 0 = optimizing pass * 1 = pass 1 * 2 = pass 2 */ extern int pass0; /* this is globally known */ #endif