/* nasm.h main header file for the Netwide Assembler: inter-module interface * * The Netwide Assembler is copyright (C) 1996 Simon Tatham and * Julian Hall. All rights reserved. The software is * redistributable under the licence given in the file "Licence" * distributed in the NASM archive. * * initial version: 27/iii/95 by Simon Tatham */ #ifndef NASM_NASM_H #define NASM_NASM_H #include "compiler.h" #include #include #include "version.h" /* generated NASM version macros */ #include "nasmlib.h" #include "insnsi.h" /* For enum opcode */ #define NO_SEG -1L /* null segment value */ #define SEG_ABS 0x40000000L /* mask for far-absolute segments */ #ifndef FILENAME_MAX #define FILENAME_MAX 256 #endif #ifndef PREFIX_MAX #define PREFIX_MAX 10 #endif #ifndef POSTFIX_MAX #define POSTFIX_MAX 10 #endif #define IDLEN_MAX 4096 /* * Name pollution problems: on Digital UNIX pulls in some * strange hardware header file which sees fit to define R_SP. We * undefine it here so as not to break the enum below. */ #ifdef R_SP #undef R_SP #endif /* * We must declare the existence of this structure type up here, * since we have to reference it before we define it... */ struct ofmt; /* * ----------------------- * Other function typedefs * ----------------------- */ /* * A label-lookup function should look like this. */ typedef bool (*lfunc) (char *label, int32_t *segment, int32_t *offset); /* * And a label-definition function like this. The boolean parameter * `is_norm' states whether the label is a `normal' label (which * should affect the local-label system), or something odder like * an EQU or a segment-base symbol, which shouldn't. */ typedef void (*ldfunc) (char *label, int32_t segment, int32_t offset, char *special, bool is_norm, bool isextrn, struct ofmt * ofmt, efunc error); /* * List-file generators should look like this: */ typedef struct { /* * Called to initialize the listing file generator. Before this * is called, the other routines will silently do nothing when * called. The `char *' parameter is the file name to write the * listing to. */ void (*init) (char *, efunc); /* * Called to clear stuff up and close the listing file. */ void (*cleanup) (void); /* * Called to output binary data. Parameters are: the offset; * the data; the data type. Data types are similar to the * output-format interface, only OUT_ADDRESS will _always_ be * displayed as if it's relocatable, so ensure that any non- * relocatable address has been converted to OUT_RAWDATA by * then. Note that OUT_RAWDATA+0 is a valid data type, and is a * dummy call used to give the listing generator an offset to * work with when doing things like uplevel(LIST_TIMES) or * uplevel(LIST_INCBIN). */ void (*output) (int32_t, const void *, uint32_t); /* * Called to send a text line to the listing generator. The * `int' parameter is LIST_READ or LIST_MACRO depending on * whether the line came directly from an input file or is the * result of a multi-line macro expansion. */ void (*line) (int, char *); /* * Called to change one of the various levelled mechanisms in * the listing generator. LIST_INCLUDE and LIST_MACRO can be * used to increase the nesting level of include files and * macro expansions; LIST_TIMES and LIST_INCBIN switch on the * two binary-output-suppression mechanisms for large-scale * pseudo-instructions. * * LIST_MACRO_NOLIST is synonymous with LIST_MACRO except that * it indicates the beginning of the expansion of a `nolist' * macro, so anything under that level won't be expanded unless * it includes another file. */ void (*uplevel) (int); /* * Reverse the effects of uplevel. */ void (*downlevel) (int); } ListGen; /* * The expression evaluator must be passed a scanner function; a * standard scanner is provided as part of nasmlib.c. The * preprocessor will use a different one. Scanners, and the * token-value structures they return, look like this. * * The return value from the scanner is always a copy of the * `t_type' field in the structure. */ struct tokenval { int t_type; int64_t t_integer, t_inttwo; char *t_charptr; }; typedef int (*scanner) (void *private_data, struct tokenval * tv); /* * Token types returned by the scanner, in addition to ordinary * ASCII character values, and zero for end-of-string. */ enum { /* token types, other than chars */ TOKEN_INVALID = -1, /* a placeholder value */ TOKEN_EOS = 0, /* end of string */ TOKEN_EQ = '=', TOKEN_GT = '>', TOKEN_LT = '<', /* aliases */ TOKEN_ID = 256, TOKEN_NUM, TOKEN_REG, TOKEN_INSN, /* major token types */ TOKEN_ERRNUM, /* numeric constant with error in */ TOKEN_HERE, TOKEN_BASE, /* $ and $$ */ TOKEN_SPECIAL, /* BYTE, WORD, DWORD, QWORD, FAR, NEAR, etc */ TOKEN_PREFIX, /* A32, O16, LOCK, REPNZ, TIMES, etc */ TOKEN_SHL, TOKEN_SHR, /* << and >> */ TOKEN_SDIV, TOKEN_SMOD, /* // and %% */ TOKEN_GE, TOKEN_LE, TOKEN_NE, /* >=, <= and <> (!= is same as <>) */ TOKEN_DBL_AND, TOKEN_DBL_OR, TOKEN_DBL_XOR, /* &&, || and ^^ */ TOKEN_SEG, TOKEN_WRT, /* SEG and WRT */ TOKEN_FLOAT, /* floating-point constant */ TOKEN_FLOATIZE, /* __floatX__ */ }; enum floatize { FLOAT_16, FLOAT_32, FLOAT_64, FLOAT_80M, FLOAT_80E, FLOAT_128L, FLOAT_128H, }; struct location { int64_t offset; int32_t segment; int known; }; /* * Expression-evaluator datatype. Expressions, within the * evaluator, are stored as an array of these beasts, terminated by * a record with type==0. Mostly, it's a vector type: each type * denotes some kind of a component, and the value denotes the * multiple of that component present in the expression. The * exception is the WRT type, whose `value' field denotes the * segment to which the expression is relative. These segments will * be segment-base types, i.e. either odd segment values or SEG_ABS * types. So it is still valid to assume that anything with a * `value' field of zero is insignificant. */ typedef struct { int32_t type; /* a register, or EXPR_xxx */ int64_t value; /* must be >= 32 bits */ } expr; /* * Library routines to manipulate expression data types. */ int is_reloc(expr *); int is_simple(expr *); int is_really_simple(expr *); int is_unknown(expr *); int is_just_unknown(expr *); int64_t reloc_value(expr *); int32_t reloc_seg(expr *); int32_t reloc_wrt(expr *); /* * The evaluator can also return hints about which of two registers * used in an expression should be the base register. See also the * `operand' structure. */ struct eval_hints { int64_t base; int type; }; /* * The actual expression evaluator function looks like this. When * called, it expects the first token of its expression to already * be in `*tv'; if it is not, set tv->t_type to TOKEN_INVALID and * it will start by calling the scanner. * * If a forward reference happens during evaluation, the evaluator * must set `*fwref' to true if `fwref' is non-NULL. * * `critical' is non-zero if the expression may not contain forward * references. The evaluator will report its own error if this * occurs; if `critical' is 1, the error will be "symbol not * defined before use", whereas if `critical' is 2, the error will * be "symbol undefined". * * If `critical' has bit 8 set (in addition to its main value: 0x101 * and 0x102 correspond to 1 and 2) then an extended expression * syntax is recognised, in which relational operators such as =, < * and >= are accepted, as well as low-precedence logical operators * &&, ^^ and ||. * * If `hints' is non-NULL, it gets filled in with some hints as to * the base register in complex effective addresses. */ #define CRITICAL 0x100 typedef expr *(*evalfunc) (scanner sc, void *scprivate, struct tokenval * tv, int *fwref, int critical, efunc error, struct eval_hints * hints); /* * Special values for expr->type. These come after EXPR_REG_END * as defined in regs.h. */ #define EXPR_UNKNOWN (EXPR_REG_END+1) /* forward references */ #define EXPR_SIMPLE (EXPR_REG_END+2) #define EXPR_WRT (EXPR_REG_END+3) #define EXPR_SEGBASE (EXPR_REG_END+4) /* * Preprocessors ought to look like this: */ typedef struct preproc_ops { /* * Called at the start of a pass; given a file name, the number * of the pass, an error reporting function, an evaluator * function, and a listing generator to talk to. */ void (*reset) (char *, int, efunc, evalfunc, ListGen *); /* * Called to fetch a line of preprocessed source. The line * returned has been malloc'ed, and so should be freed after * use. */ char *(*getline) (void); /* * Called at the end of a pass. */ void (*cleanup) (int); } Preproc; extern Preproc nasmpp; /* * ---------------------------------------------------------------- * Some lexical properties of the NASM source language, included * here because they are shared between the parser and preprocessor * ---------------------------------------------------------------- */ /* * isidstart matches any character that may start an identifier, and isidchar * matches any character that may appear at places other than the start of an * identifier. E.g. a period may only appear at the start of an identifier * (for local labels), whereas a number may appear anywhere *but* at the * start. */ #define isidstart(c) ( isalpha(c) || (c)=='_' || (c)=='.' || (c)=='?' \ || (c)=='@' ) #define isidchar(c) ( isidstart(c) || isdigit(c) || (c)=='$' || (c)=='#' \ || (c)=='~' ) /* Ditto for numeric constants. */ #define isnumstart(c) ( isdigit(c) || (c)=='$' ) #define isnumchar(c) ( isalnum(c) ) /* This returns the numeric value of a given 'digit'. */ #define numvalue(c) ((c)>='a' ? (c)-'a'+10 : (c)>='A' ? (c)-'A'+10 : (c)-'0') /* * Data-type flags that get passed to listing-file routines. */ enum { LIST_READ, LIST_MACRO, LIST_MACRO_NOLIST, LIST_INCLUDE, LIST_INCBIN, LIST_TIMES }; /* * ----------------------------------------------------------- * Format of the `insn' structure returned from `parser.c' and * passed into `assemble.c' * ----------------------------------------------------------- */ /* * Here we define the operand types. These are implemented as bit * masks, since some are subsets of others; e.g. AX in a MOV * instruction is a special operand type, whereas AX in other * contexts is just another 16-bit register. (Also, consider CL in * shift instructions, DX in OUT, etc.) * * The basic concept here is that * (class & ~operand) == 0 * * if and only if "operand" belongs to class type "class". * * The bits are assigned as follows: * * Bits 0-7, 29: sizes * 0: 8 bits (BYTE) * 1: 16 bits (WORD) * 2: 32 bits (DWORD) * 3: 64 bits (QWORD) * 4: 80 bits (TWORD) * 5: FAR * 6: NEAR * 7: SHORT * 29: 128 bits (OWORD) * * Bits 8-11 modifiers * 8: TO * 9: COLON * 10: STRICT * 11: (reserved) * * Bits 12-15: type of operand * 12: REGISTER * 13: IMMEDIATE * 14: MEMORY (always has REGMEM attribute as well) * 15: REGMEM (valid EA operand) * * Bits 16-19: subclasses * With REG_CDT: * 16: REG_CREG (CRx) * 17: REG_DREG (DRx) * 18: REG_TREG (TRx) * With REG_GPR: * 16: REG_ACCUM (AL, AX, EAX, RAX) * 17: REG_COUNT (CL, CX, ECX, RCX) * 18: REG_DATA (DL, DX, EDX, RDX) * 19: REG_HIGH (AH, CH, DH, BH) * * With REG_SREG: * 16: REG_CS * 17: REG_DESS (DS, ES, SS) * 18: REG_FSGS * 19: REG_SEG67 * * With FPUREG: * 16: FPU0 * * With XMMREG: * 16: XMM0 * * With MEMORY: * 16: MEM_OFFS (this is a simple offset) * 17: IP_REL (IP-relative offset) * * With IMMEDIATE: * 16: UNITY (1) * 17: BYTENESS (-128..127) * * Bits 20-26: register classes * 20: REG_CDT (CRx, DRx, TRx) * 21: RM_GPR (REG_GPR) (integer register) * 22: REG_SREG * 23: IP_REG (RIP or EIP) [unused] * 24: FPUREG * 25: RM_MMX (MMXREG) * 26: RM_XMM (XMMREG) * * Bits 27-29 & 31 are currently unallocated. * * 30: SAME_AS * Special flag only used in instruction patterns; means this operand * has to be identical to another operand. Currently only supported * for registers. */ typedef uint32_t opflags_t; /* Size, and other attributes, of the operand */ #define BITS8 0x00000001L #define BITS16 0x00000002L #define BITS32 0x00000004L #define BITS64 0x00000008L /* x64 and FPU only */ #define BITS80 0x00000010L /* FPU only */ #define BITS128 0x20000000L #define FAR 0x00000020L /* grotty: this means 16:16 or */ /* 16:32, like in CALL/JMP */ #define NEAR 0x00000040L #define SHORT 0x00000080L /* and this means what it says :) */ #define SIZE_MASK 0x200000FFL /* all the size attributes */ /* Modifiers */ #define MODIFIER_MASK 0x00000f00L #define TO 0x00000100L /* reverse effect in FADD, FSUB &c */ #define COLON 0x00000200L /* operand is followed by a colon */ #define STRICT 0x00000400L /* do not optimize this operand */ /* Type of operand: memory reference, register, etc. */ #define OPTYPE_MASK 0x0000f000L #define REGISTER 0x00001000L /* register number in 'basereg' */ #define IMMEDIATE 0x00002000L #define MEMORY 0x0000c000L #define REGMEM 0x00008000L /* for r/m, ie EA, operands */ /* Register classes */ #define REG_EA 0x00009000L /* 'normal' reg, qualifies as EA */ #define RM_GPR 0x00208000L /* integer operand */ #define REG_GPR 0x00209000L /* integer register */ #define REG8 0x00209001L /* 8-bit GPR */ #define REG16 0x00209002L /* 16-bit GPR */ #define REG32 0x00209004L /* 32-bit GPR */ #define REG64 0x00209008L /* 64-bit GPR */ #define IP_REG 0x00801000L /* RIP or EIP register */ #define RIPREG 0x00801008L /* RIP */ #define EIPREG 0x00801004L /* EIP */ #define FPUREG 0x01001000L /* floating point stack registers */ #define FPU0 0x01011000L /* FPU stack register zero */ #define RM_MMX 0x02008000L /* MMX operand */ #define MMXREG 0x02009000L /* MMX register */ #define RM_XMM 0x04008000L /* XMM (SSE) operand */ #define XMMREG 0x04009000L /* XMM (SSE) register */ #define XMM0 0x04019000L /* XMM register zero */ #define REG_CDT 0x00101004L /* CRn, DRn and TRn */ #define REG_CREG 0x00111004L /* CRn */ #define REG_DREG 0x00121004L /* DRn */ #define REG_TREG 0x00141004L /* TRn */ #define REG_SREG 0x00401002L /* any segment register */ #define REG_CS 0x00411002L /* CS */ #define REG_DESS 0x00421002L /* DS, ES, SS */ #define REG_FSGS 0x00441002L /* FS, GS */ #define REG_SEG67 0x00481002L /* Unimplemented segment registers */ #define REG_RIP 0x00801008L /* RIP relative addressing */ #define REG_EIP 0x00801004L /* EIP relative addressing */ /* Special GPRs */ #define REG_SMASK 0x000f0000L /* a mask for the following */ #define REG_ACCUM 0x00219000L /* accumulator: AL, AX, EAX, RAX */ #define REG_AL 0x00219001L #define REG_AX 0x00219002L #define REG_EAX 0x00219004L #define REG_RAX 0x00219008L #define REG_COUNT 0x00229000L /* counter: CL, CX, ECX, RCX */ #define REG_CL 0x00229001L #define REG_CX 0x00229002L #define REG_ECX 0x00229004L #define REG_RCX 0x00229008L #define REG_DL 0x00249001L /* data: DL, DX, EDX, RDX */ #define REG_DX 0x00249002L #define REG_EDX 0x00249004L #define REG_RDX 0x00249008L #define REG_HIGH 0x00289001L /* high regs: AH, CH, DH, BH */ /* special types of EAs */ #define MEM_OFFS 0x0001c000L /* simple [address] offset - absolute! */ #define IP_REL 0x0002c000L /* IP-relative offset */ /* memory which matches any type of r/m operand */ #define MEMORY_ANY (MEMORY|RM_GPR|RM_MMX|RM_XMM) /* special type of immediate operand */ #define UNITY 0x00012000L /* for shift/rotate instructions */ #define SBYTE 0x00022000L /* for op r16/32,immediate instrs. */ /* special flags */ #define SAME_AS 0x40000000L /* Register names automatically generated from regs.dat */ #include "regs.h" enum ccode { /* condition code names */ C_A, C_AE, C_B, C_BE, C_C, C_E, C_G, C_GE, C_L, C_LE, C_NA, C_NAE, C_NB, C_NBE, C_NC, C_NE, C_NG, C_NGE, C_NL, C_NLE, C_NO, C_NP, C_NS, C_NZ, C_O, C_P, C_PE, C_PO, C_S, C_Z, C_none = -1 }; /* * REX flags */ #define REX_OC 0x0200 /* DREX suffix has the OC0 bit set */ #define REX_D 0x0100 /* Instruction uses DREX instead of REX */ #define REX_H 0x80 /* High register present, REX forbidden */ #define REX_P 0x40 /* REX prefix present/required */ #define REX_L 0x20 /* Use LOCK prefix instead of REX.R */ #define REX_W 0x08 /* 64-bit operand size */ #define REX_R 0x04 /* ModRM reg extension */ #define REX_X 0x02 /* SIB index extension */ #define REX_B 0x01 /* ModRM r/m extension */ #define REX_REAL 0x4f /* Actual REX prefix bits */ /* * Note that because segment registers may be used as instruction * prefixes, we must ensure the enumerations for prefixes and * register names do not overlap. */ enum prefixes { /* instruction prefixes */ PREFIX_ENUM_START = REG_ENUM_LIMIT, P_A16 = PREFIX_ENUM_START, P_A32, P_LOCK, P_O16, P_O32, P_REP, P_REPE, P_REPNE, P_REPNZ, P_REPZ, P_TIMES }; enum { /* extended operand types */ EOT_NOTHING, EOT_DB_STRING, EOT_DB_NUMBER }; enum { /* special EA flags */ EAF_BYTEOFFS = 1, /* force offset part to byte size */ EAF_WORDOFFS = 2, /* force offset part to [d]word size */ EAF_TIMESTWO = 4, /* really do EAX*2 not EAX+EAX */ EAF_REL = 8, /* IP-relative addressing */ EAF_ABS = 16, /* non-IP-relative addressing */ EAF_FSGS = 32 /* fs/gs segment override present */ }; enum eval_hint { /* values for `hinttype' */ EAH_NOHINT = 0, /* no hint at all - our discretion */ EAH_MAKEBASE = 1, /* try to make given reg the base */ EAH_NOTBASE = 2 /* try _not_ to make reg the base */ }; typedef struct { /* operand to an instruction */ int32_t type; /* type of operand */ int addr_size; /* 0 means default; 16; 32; 64 */ enum reg_enum basereg, indexreg; /* address registers */ int scale; /* index scale */ int hintbase; enum eval_hint hinttype; /* hint as to real base register */ int32_t segment; /* immediate segment, if needed */ int64_t offset; /* any immediate number */ int32_t wrt; /* segment base it's relative to */ int eaflags; /* special EA flags */ int opflags; /* see OPFLAG_* defines below */ } operand; #define OPFLAG_FORWARD 1 /* operand is a forward reference */ #define OPFLAG_EXTERN 2 /* operand is an external reference */ typedef struct extop { /* extended operand */ struct extop *next; /* linked list */ int32_t type; /* defined above */ char *stringval; /* if it's a string, then here it is */ int stringlen; /* ... and here's how long it is */ int32_t segment; /* if it's a number/address, then... */ int64_t offset; /* ... it's given here ... */ int32_t wrt; /* ... and here */ } extop; #define MAXPREFIX 4 #define MAX_OPERANDS 4 typedef struct { /* an instruction itself */ char *label; /* the label defined, or NULL */ enum prefixes prefixes[MAXPREFIX]; /* instruction prefixes, if any */ int nprefix; /* number of entries in above */ enum opcode opcode; /* the opcode - not just the string */ enum ccode condition; /* the condition code, if Jcc/SETcc */ int operands; /* how many operands? 0-3 * (more if db et al) */ operand oprs[MAX_OPERANDS]; /* the operands, defined as above */ extop *eops; /* extended operands */ int eops_float; /* true if DD and floating */ int32_t times; /* repeat count (TIMES prefix) */ int forw_ref; /* is there a forward reference? */ int rex; /* Special REX Prefix */ int drexdst; /* Destination register for DREX suffix */ } insn; enum geninfo { GI_SWITCH }; /* * ------------------------------------------------------------ * The data structure defining an output format driver, and the * interfaces to the functions therein. * ------------------------------------------------------------ */ struct ofmt { /* * This is a short (one-liner) description of the type of * output generated by the driver. */ const char *fullname; /* * This is a single keyword used to select the driver. */ const char *shortname; /* * this is reserved for out module specific help. * It is set to NULL in all the out modules and is not implemented * in the main program */ const char *helpstring; /* * this is a pointer to the first element of the debug information */ struct dfmt **debug_formats; /* * and a pointer to the element that is being used * note: this is set to the default at compile time and changed if the * -F option is selected. If developing a set of new debug formats for * an output format, be sure to set this to whatever default you want * */ struct dfmt *current_dfmt; /* * This, if non-NULL, is a NULL-terminated list of `char *'s * pointing to extra standard macros supplied by the object * format (e.g. a sensible initial default value of __SECT__, * and user-level equivalents for any format-specific * directives). */ const char **stdmac; /* * This procedure is called at the start of an output session. * It tells the output format what file it will be writing to, * what routine to report errors through, and how to interface * to the label manager and expression evaluator if necessary. * It also gives it a chance to do other initialisation. */ void (*init) (FILE * fp, efunc error, ldfunc ldef, evalfunc eval); /* * This procedure is called to pass generic information to the * object file. The first parameter gives the information type * (currently only command line switches) * and the second parameter gives the value. This function returns * 1 if recognized, 0 if unrecognized */ int (*setinfo) (enum geninfo type, char **string); /* * This procedure is called by assemble() to write actual * generated code or data to the object file. Typically it * doesn't have to actually _write_ it, just store it for * later. * * The `type' argument specifies the type of output data, and * usually the size as well: its contents are described below. */ void (*output) (int32_t segto, const void *data, uint32_t type, int32_t segment, int32_t wrt); /* * This procedure is called once for every symbol defined in * the module being assembled. It gives the name and value of * the symbol, in NASM's terms, and indicates whether it has * been declared to be global. Note that the parameter "name", * when passed, will point to a piece of static storage * allocated inside the label manager - it's safe to keep using * that pointer, because the label manager doesn't clean up * until after the output driver has. * * Values of `is_global' are: 0 means the symbol is local; 1 * means the symbol is global; 2 means the symbol is common (in * which case `offset' holds the _size_ of the variable). * Anything else is available for the output driver to use * internally. * * This routine explicitly _is_ allowed to call the label * manager to define further symbols, if it wants to, even * though it's been called _from_ the label manager. That much * re-entrancy is guaranteed in the label manager. However, the * label manager will in turn call this routine, so it should * be prepared to be re-entrant itself. * * The `special' parameter contains special information passed * through from the command that defined the label: it may have * been an EXTERN, a COMMON or a GLOBAL. The distinction should * be obvious to the output format from the other parameters. */ void (*symdef) (char *name, int32_t segment, int32_t offset, int is_global, char *special); /* * This procedure is called when the source code requests a * segment change. It should return the corresponding segment * _number_ for the name, or NO_SEG if the name is not a valid * segment name. * * It may also be called with NULL, in which case it is to * return the _default_ section number for starting assembly in. * * It is allowed to modify the string it is given a pointer to. * * It is also allowed to specify a default instruction size for * the segment, by setting `*bits' to 16 or 32. Or, if it * doesn't wish to define a default, it can leave `bits' alone. */ int32_t (*section) (char *name, int pass, int *bits); /* * This procedure is called to modify the segment base values * returned from the SEG operator. It is given a segment base * value (i.e. a segment value with the low bit set), and is * required to produce in return a segment value which may be * different. It can map segment bases to absolute numbers by * means of returning SEG_ABS types. * * It should return NO_SEG if the segment base cannot be * determined; the evaluator (which calls this routine) is * responsible for throwing an error condition if that occurs * in pass two or in a critical expression. */ int32_t (*segbase) (int32_t segment); /* * This procedure is called to allow the output driver to * process its own specific directives. When called, it has the * directive word in `directive' and the parameter string in * `value'. It is called in both assembly passes, and `pass' * will be either 1 or 2. * * This procedure should return zero if it does not _recognise_ * the directive, so that the main program can report an error. * If it recognises the directive but then has its own errors, * it should report them itself and then return non-zero. It * should also return non-zero if it correctly processes the * directive. */ int (*directive) (char *directive, char *value, int pass); /* * This procedure is called before anything else - even before * the "init" routine - and is passed the name of the input * file from which this output file is being generated. It * should return its preferred name for the output file in * `outname', if outname[0] is not '\0', and do nothing to * `outname' otherwise. Since it is called before the driver is * properly initialized, it has to be passed its error handler * separately. * * This procedure may also take its own copy of the input file * name for use in writing the output file: it is _guaranteed_ * that it will be called before the "init" routine. * * The parameter `outname' points to an area of storage * guaranteed to be at least FILENAME_MAX in size. */ void (*filename) (char *inname, char *outname, efunc error); /* * This procedure is called after assembly finishes, to allow * the output driver to clean itself up and free its memory. * Typically, it will also be the point at which the object * file actually gets _written_. * * One thing the cleanup routine should always do is to close * the output file pointer. */ void (*cleanup) (int debuginfo); }; /* * values for the `type' parameter to an output function. Each one * must have the actual number of _bytes_ added to it. * * Exceptions are OUT_RELxADR, which denote an x-byte relocation * which will be a relative jump. For this we need to know the * distance in bytes from the start of the relocated record until * the end of the containing instruction. _This_ is what is stored * in the size part of the parameter, in this case. * * Also OUT_RESERVE denotes reservation of N bytes of BSS space, * and the contents of the "data" parameter is irrelevant. * * The "data" parameter for the output function points to a "int32_t", * containing the address in question, unless the type is * OUT_RAWDATA, in which case it points to an "uint8_t" * array. */ #define OUT_RAWDATA 0x00000000UL #define OUT_ADDRESS 0x10000000UL #define OUT_REL2ADR 0x20000000UL #define OUT_REL4ADR 0x30000000UL #define OUT_RESERVE 0x40000000UL #define OUT_TYPMASK 0xF0000000UL #define OUT_SIZMASK 0x0FFFFFFFUL /* * ------------------------------------------------------------ * The data structure defining a debug format driver, and the * interfaces to the functions therein. * ------------------------------------------------------------ */ struct dfmt { /* * This is a short (one-liner) description of the type of * output generated by the driver. */ const char *fullname; /* * This is a single keyword used to select the driver. */ const char *shortname; /* * init - called initially to set up local pointer to object format, * void pointer to implementation defined data, file pointer (which * probably won't be used, but who knows?), and error function. */ void (*init) (struct ofmt * of, void *id, FILE * fp, efunc error); /* * linenum - called any time there is output with a change of * line number or file. */ void (*linenum) (const char *filename, int32_t linenumber, int32_t segto); /* * debug_deflabel - called whenever a label is defined. Parameters * are the same as to 'symdef()' in the output format. This function * would be called before the output format version. */ void (*debug_deflabel) (char *name, int32_t segment, int32_t offset, int is_global, char *special); /* * debug_directive - called whenever a DEBUG directive other than 'LINE' * is encountered. 'directive' contains the first parameter to the * DEBUG directive, and params contains the rest. For example, * 'DEBUG VAR _somevar:int' would translate to a call to this * function with 'directive' equal to "VAR" and 'params' equal to * "_somevar:int". */ void (*debug_directive) (const char *directive, const char *params); /* * typevalue - called whenever the assembler wishes to register a type * for the last defined label. This routine MUST detect if a type was * already registered and not re-register it. */ void (*debug_typevalue) (int32_t type); /* * debug_output - called whenever output is required * 'type' is the type of info required, and this is format-specific */ void (*debug_output) (int type, void *param); /* * cleanup - called after processing of file is complete */ void (*cleanup) (void); }; /* * The type definition macros * for debugging * * low 3 bits: reserved * next 5 bits: type * next 24 bits: number of elements for arrays (0 for labels) */ #define TY_UNKNOWN 0x00 #define TY_LABEL 0x08 #define TY_BYTE 0x10 #define TY_WORD 0x18 #define TY_DWORD 0x20 #define TY_FLOAT 0x28 #define TY_QWORD 0x30 #define TY_TBYTE 0x38 #define TY_OWORD 0x40 #define TY_COMMON 0xE0 #define TY_SEG 0xE8 #define TY_EXTERN 0xF0 #define TY_EQU 0xF8 #define TYM_TYPE(x) ((x) & 0xF8) #define TYM_ELEMENTS(x) (((x) & 0xFFFFFF00) >> 8) #define TYS_ELEMENTS(x) ((x) << 8) /* * ----- * Special tokens * ----- */ enum special_tokens { S_ABS, S_BYTE, S_DWORD, S_FAR, S_LONG, S_NEAR, S_NOSPLIT, S_OWORD, S_QWORD, S_REL, S_SHORT, S_STRICT, S_TO, S_TWORD, S_WORD }; /* * ----- * Other * ----- */ /* * This is a useful #define which I keep meaning to use more often: * the number of elements of a statically defined array. */ #define elements(x) ( sizeof(x) / sizeof(*(x)) ) /* * ----- * Global modes * ----- */ /* * This declaration passes the "pass" number to all other modules * "pass0" assumes the values: 0, 0, ..., 0, 1, 2 * where 0 = optimizing pass * 1 = pass 1 * 2 = pass 2 */ extern int pass0; extern bool tasm_compatible_mode; extern int optimizing; extern int globalbits; /* 16, 32 or 64-bit mode */ extern int globalrel; /* default to relative addressing? */ extern int maxbits; /* max bits supported by output */ #endif