diff options
Diffstat (limited to 'doc/Makefile.in')
| -rw-r--r-- | doc/Makefile.in | 117 |
1 files changed, 90 insertions, 27 deletions
diff --git a/doc/Makefile.in b/doc/Makefile.in index a1089bc..c7a018f 100644 --- a/doc/Makefile.in +++ b/doc/Makefile.in @@ -1,9 +1,9 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,8 +16,7 @@ @SET_MAKE@ # -*-Makefile-*-, or close enough -# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, -# 2010 Free Software Foundation, Inc. +# Copyright (C) 2000-2013 Free Software Foundation, Inc. # This file is part of GNU Make. # # GNU Make is free software; you can redistribute it and/or modify it under @@ -33,6 +32,23 @@ # You should have received a copy of the GNU General Public License along with # this program. If not, see <http://www.gnu.org/licenses/>. VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -58,18 +74,24 @@ DIST_COMMON = $(make_TEXINFOS) $(srcdir)/Makefile.am \ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \ $(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \ - $(top_srcdir)/config/isc-posix.m4 \ + $(top_srcdir)/config/intlmacosx.m4 \ $(top_srcdir)/config/lib-ld.m4 \ $(top_srcdir)/config/lib-link.m4 \ $(top_srcdir)/config/lib-prefix.m4 $(top_srcdir)/config/nls.m4 \ $(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \ - $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in + $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ SOURCES = DIST_SOURCES = INFO_DEPS = $(srcdir)/make.info @@ -85,6 +107,11 @@ TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac am__installdirs = "$(DESTDIR)$(infodir)" am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ @@ -107,10 +134,18 @@ am__nobase_list = $(am__nobase_strip_setup); \ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_LDFLAGS = @AM_LDFLAGS@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -130,16 +165,21 @@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GETLOADAVG_LIBS = @GETLOADAVG_LIBS@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GLOBINC = @GLOBINC@ GLOBLIB = @GLOBLIB@ GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ +GUILE_CFLAGS = @GUILE_CFLAGS@ +GUILE_LIBS = @GUILE_LIBS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ KMEM_GROUP = @KMEM_GROUP@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ @@ -152,8 +192,8 @@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MAKE_HOST = @MAKE_HOST@ MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NEED_SETGID = @NEED_SETGID@ OBJEXT = @OBJEXT@ @@ -166,6 +206,9 @@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ RANLIB = @RANLIB@ REMOTE = @REMOTE@ @@ -175,6 +218,8 @@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -357,9 +402,7 @@ uninstall-html-am: uninstall-info-am: @$(PRE_UNINSTALL) - @if test -d '$(DESTDIR)$(infodir)' && \ - (install-info --version && \ - install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ @@ -486,10 +529,15 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -526,8 +574,11 @@ install-dvi: install-dvi-am install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) - test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ + fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ @@ -542,18 +593,22 @@ install-html: install-html-am install-html-am: $(HTMLS) @$(NORMAL_INSTALL) - test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ + fi; \ for p in $$list; do \ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ $(am__strip_dir) \ - if test -d "$$d$$p"; then \ + d2=$$d$$p; \ + if test -d "$$d2"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ - echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ - $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ + echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ else \ - list2="$$list2 $$d$$p"; \ + list2="$$list2 $$d2"; \ fi; \ done; \ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ @@ -565,9 +620,12 @@ install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) - test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ + fi; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ @@ -585,8 +643,7 @@ install-info-am: $(INFO_DEPS) echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done @$(POST_INSTALL) - @if (install-info --version && \ - install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + @if $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ @@ -600,8 +657,11 @@ install-pdf: install-pdf-am install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) - test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ + fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ @@ -613,8 +673,11 @@ install-ps: install-ps-am install-ps-am: $(PSS) @$(NORMAL_INSTALL) - test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" @list='$(PSS)'; test -n "$(psdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ + fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ |