From 70b67e7e430bf0ce5dd66850082ecbdf8313ffd7 Mon Sep 17 00:00:00 2001 From: Jinkun Jang Date: Tue, 12 Mar 2013 15:14:22 +0900 Subject: Tizen 2.1 base --- doc/lzop.pod | 565 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 565 insertions(+) create mode 100644 doc/lzop.pod (limited to 'doc/lzop.pod') diff --git a/doc/lzop.pod b/doc/lzop.pod new file mode 100644 index 0000000..bef01b3 --- /dev/null +++ b/doc/lzop.pod @@ -0,0 +1,565 @@ +=head1 NAME + +lzop - compress or expand files + + + +=head1 ABSTRACT + +B is a file compressor very similar to B. +B favors speed over compression ratio. + + + +=head1 SYNOPSIS + +B S<[ I ]> S<[ I ]> S<[ I ... ]> + +B S<[B<-dxlthIVL19>]> S<[B<-qvcfFnNPkU>]> +S<[B<-o> I]> S<[B<-p>[I]]> S<[B<-S> I]> +S<[I ...]> + + + +=head1 DESCRIPTION + +B reduces the size of the named files. Whenever possible, +each file is compressed into one with the extension +B<.lzo>, while keeping the same ownership modes, access and +modification times. If no files are specified, or if a +file name is "-", lzop tries to compress the standard +input to the standard output. lzop will only attempt to +compress regular files or symbolic links to regular files. +In particular, it will ignore directories. + +If the compressed file name is too long for its file system, +B truncates it. + +Compressed files can be restored to their original form +using S>. +S> takes a list of files on its command line and +decompresses each file whose name ends with B<.lzo> and which +begins with the correct magic number to an uncompressed +file without the original extension. S> also recognizes +the special extension B<.tzo> as shorthand for B<.tar.lzo>. +When compressing, lzop uses the B<.tzo> extension if necessary +instead of truncating a file with a B<.tar> extension. + +B stores the original file name, mode and time stamp +in the compressed file. These can be used when +decompressing the file with the B<-d> option. This is useful when +the compressed file name was truncated or when the time +stamp was not preserved after a file transfer. + +B preserves the ownership, mode and time stamp of files +when compressing. When decompressing lzop restores the +mode and time stamp if present in the compressed files. +See the options B<-n>, B<-N>, B<--no-mode> and B<--no-time> +for more information. + +B always keeps original files unchanged unless +you use the option B<-U>. + +B uses the I for compression +services. The amount of compression obtained depends on +the size of the input and the distribution of common substrings. +Typically, text such as source code or English +is compressed into 40-50% of the original size, and large files usually +compress much better than small ones. Compression and decompression speed +is generally much faster than that achieved by B, but +compression ratio is worse. + + + +=head2 COMPRESSION LEVELS + +lzop offers the following compression levels of the +LZO1X algorithm: + +=over 4 + +=item -3 + +the default level offers pretty fast compression. +-2, -3, -4, -5 and -6 are currently all equivalent - this +may change in a future release. + +=item -1, --fast + +can be even a little bit faster in some cases - but +most times you won't notice the difference + +=item -7, -8, -9, --best + +these compression levels are mainly intended for generating +pre-compressed data - especially B<-9> can be somewhat slow + +=back + +Decompression is I fast for all compression levels, +and decompression speed is not affected by the compression +level. + + + +=head1 MAIN COMMAND + +If no other command is given then lzop defaults to compression +(using compression level -3). + +=over 4 + +=item -#, --fast, --best + +Regulate the speed of compression using the specified +digit B<#>, where -1 or --fast indicates the +fastest compression method (less compression) and +-9 or --best indicates the slowest compression +method (best compression). The default compression +level is -3. + +=item -d, --decompress, --uncompress + +Decompress. Each file will be placed into +same the directory as the compressed file. + +=item -x, --extract + +Extract compressed files to the current working +directory. This is the same as '-dPp'. + +=item -t, --test + +Test. Check the compressed file integrity. + +=item -l, --list + +For each compressed file, list the following +fields: + + method: compression method + compressed: size of the compressed file + uncompr.: size of the uncompressed file + ratio: compression ratio + uncompressed_name: name of the uncompressed file + +In combination with the --verbose option, the following +fields are also displayed: + + date & time: time stamp for the uncompressed file + +With --name, the uncompressed name, date and time +are those stored within the compress file if present. + +With --verbose, the size totals and compression +ratio for all files is also displayed. With +--quiet, the title and totals lines are not displayed. + +Note that lzop defines compression ratio +as compressed_size / uncompressed_size. + +=item --ls, --ls=I + +List each compressed file in a format similar to S>. + +The following flags are currently honoured: + F Append a '*' for executable files. + G Inhibit display of group information. + Q Enclose file names in double quotes. + +=item --info + +For each compressed file, list the internal header fields. + +=item -I, --sysinfo + +Display information about the system and quit. + +=item -L, --license + +Display the lzop license and quit. + +=item -h, -H, --help + +Display a help screen and quit. + +=item -V + +Version. Display the version number and compilation +options and quit. + +=item --version + +Version. Display the version number and quit. + +=back + + + +=head1 OPTIONS + +=over 4 + +=item -c, --stdout, --to-stdout + +Write output on standard output. If there are several +input files, the output consists of a sequence +of independently (de)compressed members. To obtain +better compression, concatenate all input files +before compressing them. + +=item -o I, --output=I + +Write output to the file I. If there are several +input files, the output consists of a sequence +of independently (de)compressed members. + +=item -p, -pI, --path=I + +Write output files into the directory I instead +of the directory determined by the input file. If +I is omitted, then write to the current working +directory. + +=item -f, --force + +Force lzop to + + - overwrite existing files + - (de-)compress from stdin even if it seems a terminal + - (de-)compress to stdout even if it seems a terminal + - allow option -c in combination with -U + +Using B<-f> two or more times forces things like + + - compress files that already have a .lzo suffix + - try to decompress files that do not have a valid suffix + - try to handle compressed files with unknown header flags + +Use with care. + +=item -F, --no-checksum + +Do not store or verify a checksum of the uncompressed +file when compressing or decompressing. +This speeds up the operation of lzop a little bit (especially +when decompressing), but as unnoticed data corruption can happen +in case of damaged compressed files the usage of this option +is not generally recommended. +Also, a checksum is always stored when +compressing with one of the slow compression levels (-7, -8 or -9), +regardless of this option. + +=item -n, --no-name + +When decompressing, do not restore the original +file name if present (remove only the lzop suffix +from the compressed file name). This option is the +default under UNIX. + +=item -N, --name + +When decompressing, restore the original file name +if present. This option is useful on systems which +have a limit on file name length. If the original name saved in +the compressed file is not suitable for its file system, a +new name is constructed from the original one to make it +legal. +This option is the default under DOS, Windows and OS/2. + +=item -P + +When decompressing, restore the original path and file name if present. +When compressing, store the relative (and cleaned) path name. +This option is mainly useful when using B - see +usage examples below. + +=item --no-mode + +When decompressing, do not restore the original +mode (permissions) saved in the compressed file. + +=item --no-time + +When decompressing, do not restore the original +time stamp saved in the compressed file. + +=item -S I<.suf>, --suffix=I<.suf> + +Use suffix I<.suf> instead of I<.lzo>. The suffix must +not contain multiple dots and special characters like '+' or '*', +and suffixes other than I<.lzo> should be avoided to avoid confusion +when files are transferred to other systems. + +=item -k, --keep + +Do not delete input files. This is the default. + +=item -U, --unlink, --delete + +Delete input files after succesfull compression or +decompression. Use this option to make lzop behave +like B and B. +Note that explicitly giving B<-k> overrides B<-U>. + +=item --crc32 + +Use a crc32 checksum instead of a adler32 checksum. + +=item --no-warn + +Suppress all warnings. + +=item --ignore-warn + +Suppress all warnings, and never exit with exit status 2. + +=item -q, --quiet, --silent + +Suppress all warnings and decrease the verbosity of some +commands like B<--list> or B<--test>. + +=item -v, --verbose + +Verbose. Display the name for each file compressed +or decompressed. Multiple B<-v> can be used to increase +the verbosity of some commands like B<--list> or B<--test>. + +=item -- + +Specifies that this is the end of the options. Any file name +after B<--> will not be interpreted as an option even if +it starts with a hyphen. + +=back + + + +=head1 OTHER OPTIONS + +=over 4 + +=item --no-stdin + +Do not try to read standard input (but a file name "-" will +still override this option). +In old versions of B, this option was necessary when +used in cron jobs (which do not have a controlling terminal). + +=item --filter=I + +Rarely useful. +Preprocess data with a special "multimedia" filter +before compressing in order to improve compression ratio. +I must be a decimal number from 1 to 16, inclusive. +Using a filter slows down both compression and decompression +quite a bit, and the compression ratio usually doesn't improve +much either... +More effective filters may be added in the future, though. + +You can try S<--filter=1> with data like 8-bit sound samples, +S<--filter=2> with 16-bit samples or depth-16 images, etc. + +Un-filtering during decompression is handled automatically. + +=item -C, --checksum + +Deprecated. Only for compatibility with very old versions +as lzop now uses a checksum by default. This option will +get removed in a future release. + +=item --no-color + +Do not use any color escape sequences. + +=item --mono + +Assume a mono ANSI terminal. This is the default under UNIX +(if console support is compiled in). + +=item --color + +Assume a color ANSI terminal or try full-screen access. This +is the default under DOS and in a Linux virtual console +(if console support is compiled in). + + +=back + + + +=head1 ADVANCED USAGE + +lzop allows you to deal with your files in many flexible +ways. Here are some usage examples: + +=over 1 + +=item B + + tar --use-compress-program=lzop -cf archive.tar.lzo files.. + + This is the recommended mode for creating backups. + Requires GNU tar or a compatible version which accepts the + '--use-compress-program=XXX' option. + +=item B individually (de)compress each file + + create + lzop a.c -> create a.c.lzo + lzop a.c b.c -> create a.c.lzo & b.c.lzo + lzop -U a.c b.c -> create a.c.lzo & b.c.lzo and delete a.c & b.c + lzop *.c + + extract + lzop -d a.c.lzo -> restore a.c + lzop -df a.c.lzo -> restore a.c, overwrite if already exists + lzop -d *.lzo + + list + lzop -l a.c.lzo + lzop -l *.lzo + lzop -lv *.lzo -> be verbose + + test + lzop -t a.c.lzo + lzop -tq *.lzo -> be quiet + +=item B (de)compress from stdin to stdout + + create + lzop < a.c > y.lzo + cat a.c | lzop > y.lzo + tar -cf - *.c | lzop > y.tar.lzo -> create a compressed tar file + + extract + lzop -d < y.lzo > a.c + lzop -d < y.tar.lzo | tar -xvf - -> extract a tar file + + list + lzop -l < y.lzo + cat y.lzo | lzop -l + lzop -d < y.tar.lzo | tar -tvf - -> list a tar file + + test + lzop -t < y.lzo + cat y.lzo | lzop -t + +=item B (de)compress to stdout + + create + lzop -c a.c > y.lzo + + extract + lzop -dc y.lzo > a.c + lzop -dc y.tar.lzo | tar -xvf - -> extract a tar file + + list + lzop -dc y.tar.lzo | tar -tvf - -> list a tar file + +=item B compress/extract multiple files into a single archive file + + create + lzop a.c b.c -o sources.lzo -> create an archive + lzop -P src/*.c -o sources.lzo -> create an archive, store path name + lzop -c *.c > sources.lzo -> another way to create an archive + lzop -c *.h >> sources.lzo -> add files to archive + + extract + lzop -dN sources.lzo + lzop -x ../src/sources.lzo -> extract to current directory + lzop -x -p/tmp < ../src/sources.lzo -> extract to /tmp directory + + list + lzop -lNv sources.lzo + + test + lzop -t sources.lzo + lzop -tvv sources.lzo -> be very verbose + +=back + +If you wish to create a single archive file with multiple +members so that members can later be extracted independently, +you should prefer a full-featured archiver such as +tar. The latest version of GNU tar supports the +S> option to invoke lzop transparently. +lzop is designed as a complement to tar, not as +a replacement. + + + +=head1 ENVIRONMENT + +The environment variable B can hold a set of default +options for lzop. These options are interpreted first and +can be overwritten by explicit command line parameters. +For example: + + for sh/ksh/zsh: LZOP="-1v --name"; export LZOP + for csh/tcsh: setenv LZOP "-1v --name" + for DOS/Windows: set LZOP=-1v --name + +On Vax/VMS, the name of the environment variable is +LZOP_OPT, to avoid a conflict with the symbol set for +invocation of the program. + +Not all of the options are valid in the environment variable - +lzop will tell you. + + + +=head1 SEE ALSO + +B(1), B(1), B(1) + +Precompiled binaries for some platforms are available +from the lzop home page. + + see http://www.oberhumer.com/opensource/lzop/ + +lzop uses the LZO data compression library for compression +services. + + see http://www.oberhumer.com/opensource/lzo/ + + + +=head1 DIAGNOSTICS + +Exit status is normally 0; if an error occurs, exit status +is 1. If a warning occurs, exit status is 2 (unless +option B<--ignore-warn> is in effect). + +B diagnostics are intended to be self-explanatory. + + + +=head1 BUGS + +No bugs are known. Please report all problems immediately to the author. + + + +=head1 AUTHOR + +Markus Franz Xaver Johannes Oberhumer + +http://www.oberhumer.com/opensource/lzop/ + + + +=head1 COPYRIGHT + +lzop and the LZO library are +Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, +2006, 2007, 2008, 2009, 2010 by Markus Franz Xaver Johannes Oberhumer. +All Rights Reserved. + +lzop and the LZO library are distributed under the terms +of the GNU General Public License (GPL). + +Legal info: If want to integrate lzop into your commercial (backup-)system +please carefully read the GNU GPL FAQ at http://www.gnu.org/licenses/gpl-faq.html +about possible implications. + -- cgit v1.2.3