# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2018 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (C) 2002-2014 Free Software Foundation, Inc.
#
# This file is part of LIBTASN1.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@ENABLE_GTK_DOC_TRUE@am__append_1 = reference
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_ac_append_to_file.m4 \
	$(top_srcdir)/m4/ax_ac_print_to_file.m4 \
	$(top_srcdir)/m4/ax_add_am_macro_static.m4 \
	$(top_srcdir)/m4/ax_am_macros_static.m4 \
	$(top_srcdir)/m4/ax_check_gnu_make.m4 \
	$(top_srcdir)/m4/ax_code_coverage.m4 \
	$(top_srcdir)/m4/ax_file_escapes.m4 \
	$(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4-gl/00gnulib.m4 \
	$(top_srcdir)/m4-gl/__inline.m4 \
	$(top_srcdir)/m4-gl/absolute-header.m4 \
	$(top_srcdir)/m4-gl/extensions.m4 \
	$(top_srcdir)/m4-gl/extern-inline.m4 \
	$(top_srcdir)/m4-gl/gnulib-common.m4 \
	$(top_srcdir)/m4-gl/gnulib-comp.m4 \
	$(top_srcdir)/m4-gl/include_next.m4 \
	$(top_srcdir)/m4-gl/ld-version-script.m4 \
	$(top_srcdir)/m4-gl/limits-h.m4 \
	$(top_srcdir)/m4-gl/longlong.m4 $(top_srcdir)/m4-gl/minmax.m4 \
	$(top_srcdir)/m4-gl/multiarch.m4 $(top_srcdir)/m4-gl/off_t.m4 \
	$(top_srcdir)/m4-gl/ssize_t.m4 $(top_srcdir)/m4-gl/stddef_h.m4 \
	$(top_srcdir)/m4-gl/stdint.m4 $(top_srcdir)/m4-gl/string_h.m4 \
	$(top_srcdir)/m4-gl/strverscmp.m4 \
	$(top_srcdir)/m4-gl/sys_types_h.m4 \
	$(top_srcdir)/m4-gl/valgrind-tests.m4 \
	$(top_srcdir)/m4-gl/visibility.m4 \
	$(top_srcdir)/m4-gl/warn-on-use.m4 \
	$(top_srcdir)/m4-gl/wchar_t.m4 $(top_srcdir)/m4-gl/wint_t.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \
	$(srcdir)/stamp-vti $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
INFO_DEPS = $(srcdir)/libtasn1.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = libtasn1.dvi
PDFS = libtasn1.pdf
PSS = libtasn1.ps
HTMLS = libtasn1.html
TEXINFOS = libtasn1.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(man3dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(dist_man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = cyclo reference
am__DIST_COMMON = $(dist_man_MANS) $(libtasn1_TEXINFOS) \
	$(srcdir)/Makefile.in $(top_srcdir)/build-aux/mdate-sh \
	$(top_srcdir)/build-aux/texinfo.tex COPYING COPYING.LESSER \
	TODO
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
AR = @AR@
ARFLAGS = @ARFLAGS@
AS = @AS@
ASN1_VERSION_MAJOR = @ASN1_VERSION_MAJOR@
ASN1_VERSION_MINOR = @ASN1_VERSION_MINOR@
ASN1_VERSION_NUMBER = @ASN1_VERSION_NUMBER@
ASN1_VERSION_PATCH = @ASN1_VERSION_PATCH@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@
CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@
CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@
CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@
CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@
CONFIG_INCLUDE = @CONFIG_INCLUDE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GCOV = @GCOV@
GENHTML = @GENHTML@
GNULIB_EXPLICIT_BZERO = @GNULIB_EXPLICIT_BZERO@
GNULIB_FFSL = @GNULIB_FFSL@
GNULIB_FFSLL = @GNULIB_FFSLL@
GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
GNULIB_MBSCHR = @GNULIB_MBSCHR@
GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
GNULIB_MBSLEN = @GNULIB_MBSLEN@
GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
GNULIB_MBSSEP = @GNULIB_MBSSEP@
GNULIB_MBSSPN = @GNULIB_MBSSPN@
GNULIB_MBSSTR = @GNULIB_MBSSTR@
GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
GNULIB_MEMCHR = @GNULIB_MEMCHR@
GNULIB_MEMMEM = @GNULIB_MEMMEM@
GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
GNULIB_OVERRIDES_WINT_T = @GNULIB_OVERRIDES_WINT_T@
GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
GNULIB_STPCPY = @GNULIB_STPCPY@
GNULIB_STPNCPY = @GNULIB_STPNCPY@
GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
GNULIB_STRDUP = @GNULIB_STRDUP@
GNULIB_STRERROR = @GNULIB_STRERROR@
GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
GNULIB_STRNCAT = @GNULIB_STRNCAT@
GNULIB_STRNDUP = @GNULIB_STRNDUP@
GNULIB_STRNLEN = @GNULIB_STRNLEN@
GNULIB_STRPBRK = @GNULIB_STRPBRK@
GNULIB_STRSEP = @GNULIB_STRSEP@
GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
GNULIB_STRSTR = @GNULIB_STRSTR@
GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
HAVE_C99_STDINT_H = @HAVE_C99_STDINT_H@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_EXPLICIT_BZERO = @HAVE_EXPLICIT_BZERO@
HAVE_FFSL = @HAVE_FFSL@
HAVE_FFSLL = @HAVE_FFSLL@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
HAVE_MAX_ALIGN_T = @HAVE_MAX_ALIGN_T@
HAVE_MBSLEN = @HAVE_MBSLEN@
HAVE_MEMCHR = @HAVE_MEMCHR@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRSEP = @HAVE_STRSEP@
HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
HAVE_WCHAR_H = @HAVE_WCHAR_H@
HAVE_WCHAR_T = @HAVE_WCHAR_T@
HELP2MAN = @HELP2MAN@
HTML_DIR = @HTML_DIR@
INCLUDE_NEXT = @INCLUDE_NEXT@
INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCOV = @LCOV@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTESTS_LIBDEPS = @LIBTESTS_LIBDEPS@
LIBTOOL = @LIBTOOL@
LIMITS_H = @LIMITS_H@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NEXT_AS_FIRST_DIRECTIVE_LIMITS_H = @NEXT_AS_FIRST_DIRECTIVE_LIMITS_H@
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H@
NEXT_LIMITS_H = @NEXT_LIMITS_H@
NEXT_STDDEF_H = @NEXT_STDDEF_H@
NEXT_STDINT_H = @NEXT_STDINT_H@
NEXT_STRING_H = @NEXT_STRING_H@
NEXT_SYS_TYPES_H = @NEXT_SYS_TYPES_H@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
REPLACE_MEMCHR = @REPLACE_MEMCHR@
REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_NULL = @REPLACE_NULL@
REPLACE_STPNCPY = @REPLACE_STPNCPY@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
REPLACE_STRDUP = @REPLACE_STRDUP@
REPLACE_STRERROR = @REPLACE_STRERROR@
REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
REPLACE_STRNCAT = @REPLACE_STRNCAT@
REPLACE_STRNDUP = @REPLACE_STRNDUP@
REPLACE_STRNLEN = @REPLACE_STRNLEN@
REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
STDDEF_H = @STDDEF_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
VALGRIND = @VALGRIND@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WINDOWS_64_BIT_OFF_T = @WINDOWS_64_BIT_OFF_T@
WINDOWS_STAT_INODES = @WINDOWS_STAT_INODES@
WINT_T_SUFFIX = @WINT_T_SUFFIX@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
gltests_LIBOBJS = @gltests_LIBOBJS@
gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
gltests_WITNESS = @gltests_WITNESS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
ifGNUmake = @ifGNUmake@
ifnGNUmake = @ifnGNUmake@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = cyclo $(am__append_1)
EXTRA_DIST = gdoc TODO libtasn1.html libtasn1.ps libtasn1.pdf stamp_docs \
	COPYING COPYING.LESSER

info_TEXINFOS = libtasn1.texi
libtasn1_TEXINFOS = fdl-1.3.texi texinfo.css $(gdoc_TEXINFOS)
AM_MAKEINFOFLAGS = -I $(top_builddir)/doc
TEXI2DVI = texi2dvi $(AM_MAKEINFOFLAGS)
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) \
	--no-split --number-sections --css-include=texinfo.css

dist_man_MANS = $(gdoc_MANS) asn1Parser.1 asn1Coding.1 asn1Decoding.1
HELP2MAN_OPTS = --info-page libtasn1
gdoc_MANS = man/asn1_get_length_der.3 man/asn1_get_tag_der.3 \
	man/asn1_get_length_ber.3 man/asn1_get_octet_der.3 \
	man/asn1_get_object_id_der.3 man/asn1_get_bit_der.3 \
	man/asn1_der_decoding2.3 man/asn1_der_decoding.3 \
	man/asn1_der_decoding_element.3 \
	man/asn1_der_decoding_startEnd.3 \
	man/asn1_expand_any_defined_by.3 \
	man/asn1_expand_octet_string.3 man/asn1_decode_simple_der.3 \
	man/asn1_decode_simple_ber.3 man/asn1_perror.3 \
	man/asn1_strerror.3 man/asn1_find_node.3 man/asn1_length_der.3 \
	man/asn1_octet_der.3 man/asn1_encode_simple_der.3 \
	man/asn1_bit_der.3 man/asn1_der_coding.3 \
	man/asn1_write_value.3 man/asn1_read_value.3 \
	man/asn1_read_value_type.3 man/asn1_read_tag.3 \
	man/asn1_read_node_value.3 man/asn1_array2tree.3 \
	man/asn1_delete_structure.3 man/asn1_delete_structure2.3 \
	man/asn1_delete_element.3 man/asn1_create_element.3 \
	man/asn1_print_structure.3 man/asn1_number_of_elements.3 \
	man/asn1_find_structure_from_oid.3 man/asn1_copy_node.3 \
	man/asn1_dup_node.3 man/asn1_parser2tree.3 \
	man/asn1_parser2array.3 man/asn1_check_version.3
gdoc_TEXINFOS = texi/decoding.c.texi texi/errors.c.texi \
	texi/parser_aux.c.texi texi/coding.c.texi texi/element.c.texi \
	texi/gstr.c.texi texi/structure.c.texi texi/ASN1.c.texi \
	texi/version.c.texi texi/asn1_get_length_der.texi \
	texi/asn1_get_tag_der.texi texi/asn1_get_length_ber.texi \
	texi/asn1_get_octet_der.texi texi/asn1_get_object_id_der.texi \
	texi/asn1_get_bit_der.texi texi/asn1_der_decoding2.texi \
	texi/asn1_der_decoding.texi \
	texi/asn1_der_decoding_element.texi \
	texi/asn1_der_decoding_startEnd.texi \
	texi/asn1_expand_any_defined_by.texi \
	texi/asn1_expand_octet_string.texi \
	texi/asn1_decode_simple_der.texi \
	texi/asn1_decode_simple_ber.texi texi/asn1_perror.texi \
	texi/asn1_strerror.texi texi/asn1_find_node.texi \
	texi/asn1_length_der.texi texi/asn1_octet_der.texi \
	texi/asn1_encode_simple_der.texi texi/asn1_bit_der.texi \
	texi/asn1_der_coding.texi texi/asn1_write_value.texi \
	texi/asn1_read_value.texi texi/asn1_read_value_type.texi \
	texi/asn1_read_tag.texi texi/asn1_read_node_value.texi \
	texi/asn1_array2tree.texi texi/asn1_delete_structure.texi \
	texi/asn1_delete_structure2.texi texi/asn1_delete_element.texi \
	texi/asn1_create_element.texi texi/asn1_print_structure.texi \
	texi/asn1_number_of_elements.texi \
	texi/asn1_find_structure_from_oid.texi \
	texi/asn1_copy_node.texi texi/asn1_dup_node.texi \
	texi/asn1_parser2tree.texi texi/asn1_parser2array.texi \
	texi/asn1_check_version.texi
GDOC_SRC = $(top_srcdir)/lib/decoding.c $(top_srcdir)/lib/errors.c	\
	$(top_srcdir)/lib/parser_aux.c $(top_srcdir)/lib/coding.c	\
	$(top_srcdir)/lib/element.c $(top_srcdir)/lib/gstr.c		\
	$(top_srcdir)/lib/structure.c $(top_srcdir)/lib/ASN1.c		\
	$(top_srcdir)/lib/version.c

all: all-recursive

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

.texi.info:
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	$<

.texi.pdf:
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	$<

.texi.html:
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
$(srcdir)/libtasn1.info: libtasn1.texi $(srcdir)/version.texi $(libtasn1_TEXINFOS)
libtasn1.dvi: libtasn1.texi $(srcdir)/version.texi $(libtasn1_TEXINFOS)
libtasn1.pdf: libtasn1.texi $(srcdir)/version.texi $(libtasn1_TEXINFOS)
libtasn1.html: libtasn1.texi $(srcdir)/version.texi $(libtasn1_TEXINFOS)
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: libtasn1.texi $(top_srcdir)/configure
	@(dir=.; test -f ./libtasn1.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/libtasn1.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
	(cmp -s vti.tmp$$$$ $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi" && \
	      cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \
	      mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \
	rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp* $(srcdir)/version.texi.tmp*

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf libtasn1.t2d libtasn1.t2p

clean-aminfo:
	-test -z "libtasn1.dvi libtasn1.pdf libtasn1.ps libtasn1.html" \
	|| rm -rf libtasn1.dvi libtasn1.pdf libtasn1.ps libtasn1.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man3: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man3dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.3[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
	done; }

uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man3dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.3[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-aminfo clean-generic clean-libtool clean-local \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-dvi: install-dvi-recursive

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:

install-html: install-html-recursive

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1 install-man3

install-pdf: install-pdf-recursive

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool mostlyclean-vti

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1 uninstall-man3

.MAKE: $(am__recursive_targets) install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
	check-am clean clean-aminfo clean-generic clean-libtool \
	clean-local cscopelist-am ctags ctags-am dist-info distclean \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-man3 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
	pdf-am ps ps-am tags tags-am uninstall uninstall-am \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-man3 uninstall-pdf-am \
	uninstall-ps-am

.PRECIOUS: Makefile


asn1Parser.1: $(top_srcdir)/src/asn1Parser.c $(top_srcdir)/configure.ac
	$(HELP2MAN) $(HELP2MAN_OPTS) \
		--name="ASN.1 syntax tree generator for libtasn1" \
		--output=$@ $(top_builddir)/src/asn1Parser$(EXEEXT)

asn1Coding.1: $(top_srcdir)/src/asn1Coding.c $(top_srcdir)/configure.ac
	$(HELP2MAN) $(HELP2MAN_OPTS) \
		--name="ASN.1 DER encoder" \
		--output=$@ $(top_builddir)/src/asn1Coding$(EXEEXT)

asn1Decoding.1: $(top_srcdir)/src/asn1Decoding.c $(top_srcdir)/configure.ac
	$(HELP2MAN) $(HELP2MAN_OPTS) \
		--name="ASN.1 DER decoder" \
		--output=$@ $(top_builddir)/src/asn1Decoding$(EXEEXT)

compare-makefile:
	@MANS=""; \
	TEXINFOS=""; \
	for i in $(GDOC_SRC); do \
		BASE=`basename $$i`; \
		TEXINFOS="$$TEXINFOS\ngdoc_TEXINFOS += texi/$$BASE.texi"; \
	done; \
	FUNCS=`$(srcdir)/gdoc -listfunc $(GDOC_SRC)`; \
	for i in $$FUNCS; do \
		MANS="$$MANS\ngdoc_MANS += man/$$i.3"; \
		TEXINFOS="$$TEXINFOS\ngdoc_TEXINFOS += texi/$$i.texi"; \
	done; \
	grep -v -e '^gdoc_MANS += ' -e '^gdoc_TEXINFOS += ' Makefile.am | \
		perl -p -e "s,^gdoc_MANS =,gdoc_MANS =$$MANS,;" | \
		perl -p -e "s,^gdoc_TEXINFOS =,gdoc_TEXINFOS =$$TEXINFOS,;" \
		> tmp-$@;
	diff -u $(srcdir)/Makefile.am tmp-$@
	rm -f tmp-$@

$(gdoc_MANS) $(gdoc_TEXINFOS): stamp_docs

clean-local:
	-rm -f stamp_docs

stamp_docs:
	$(mkdir_p) man texi; \
	for i in `$(srcdir)/gdoc -listfunc $(GDOC_SRC)`; do \
		echo -n "Creating documentation for $$i... " && \
		$(srcdir)/gdoc -man \
			-module $(PACKAGE) \
			-pkg-name "$(PACKAGE_NAME)" \
			-sourceversion $(VERSION) \
			-include libtasn1.h \
			-seeinfo $(PACKAGE) -verbatimcopying \
			-copyright "2006-2015 Free Software Foundation, Inc." \
			-function $$i \
			$(GDOC_SRC) > man/$$i.3 && \
		$(srcdir)/gdoc -texinfo -function $$i \
			$(GDOC_SRC) > texi/$$i.texi && \
		echo "ok"; \
	done; \
	for i in $(GDOC_SRC); do \
		BASE=`basename $$i`; \
		echo -n "Creating documentation for $$i... " && \
		$(srcdir)/gdoc -texinfo $$i > texi/$$BASE.texi && \
		echo "ok"; \
	done
	touch $@

.PHONY: compare-makefile

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: