Imported Upstream version 0.6.6upstream/0.6.6

Change-Id: I39261d63e28e2f057203bd11bd6b1cbb83523fab
Signed-off-by: DongHun Kwak <dh0128.kwak@samsung.com>

42 files changed, 1707 insertions, 34 deletions

diff --git a/doc/CMakeLists.txt b/doc/CMakeLists.txt
index fc588e7..13e086c 100644
--- a/doc/CMakeLists.txt
+++ b/doc/CMakeLists.txt
@@ -1,8 +1,51 @@
 
-SET (libsolv_MANPAGES
+SET (libsolv_MANPAGES3
     libsolv.3 libsolv-bindings.3 libsolv-constantids.3 libsolv-history.3
     libsolv-pool.3)
 
+SET (libsolv_MANPAGES1
+    mergesolv.1 dumpsolv.1 installcheck.1 testsolv.1)
+
+IF (ENABLE_RPMDB)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} rpmdb2solv.1 rpms2solv.1)
+ENDIF (ENABLE_RPMDB)
+
+IF (ENABLE_RPMMD)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} repomdxml2solv.1 rpmmd2solv.1 updateinfoxml2solv.1 deltainfoxml2solv.1)
+ENDIF (ENABLE_RPMMD)
+
+IF (ENABLE_HELIXREPO)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} helix2solv.1)
+ENDIF (ENABLE_HELIXREPO)
+
+IF (ENABLE_SUSEREPO)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} susetags2solv.1)
+ENDIF (ENABLE_SUSEREPO)
+
+IF (ENABLE_COMPS)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} comps2solv.1)
+ENDIF (ENABLE_COMPS)
+
+IF (ENABLE_DEBIAN)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} deb2solv.1)
+ENDIF (ENABLE_DEBIAN)
+
+IF (ENABLE_MDKREPO)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} mdk2solv.1)
+ENDIF (ENABLE_MDKREPO)
+
+IF (ENABLE_ARCHREPO)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} archpkgs2solv.1 archrepo2solv.1)
+ENDIF (ENABLE_ARCHREPO)
+
+IF (ENABLE_APPDATA)
+SET (libsolv_MANPAGES1 ${libsolv_MANPAGES1} appdata2solv.1)
+ENDIF (ENABLE_APPDATA)
+
 INSTALL(FILES
-    ${libsolv_MANPAGES}
+    ${libsolv_MANPAGES3}
     DESTINATION "${MAN_INSTALL_DIR}/man3")
+
+INSTALL(FILES
+    ${libsolv_MANPAGES1}
+    DESTINATION "${MAN_INSTALL_DIR}/man1")
diff --git a/doc/Makefile.gen b/doc/Makefile.gen
index e18d0bc..84a1095 100644
--- a/doc/Makefile.gen
+++ b/doc/Makefile.gen
@@ -1,9 +1,19 @@
 
-man: libsolv.3 libsolv-bindings.3 libsolv-constantids.3 libsolv-history.3 libsolv-pool.3
+man:	man3 man1
+
+man3:	libsolv.3 libsolv-bindings.3 libsolv-constantids.3 libsolv-history.3 libsolv-pool.3
+
+man1:	mergesolv.1 dumpsolv.1 installcheck.1 testsolv.1 rpmdb2solv.1 rpms2solv.1 \
+	rpmmd2solv.1 repomdxml2solv.1 updateinfoxml2solv.1 deltainfoxml2solv.1 \
+	helix2solv.1 susetags2solv.1 comps2solv.1 deb2solv.1 mdk2solv.1 \
+	archpkgs2solv.1 archrepo2solv.1 appdata2solv.1
 
 html: libsolv.html libsolv-bindings.html libsolv-constantids.html libsolv-history.html libsolv-pool.html
 
-.SUFFIXES: .html .3 .txt
+.SUFFIXES: .html .3 .1 .txt
+
+.txt.1:
+	a2x -f manpage $<
 
 .txt.3:
 	a2x -f manpage $<
diff --git a/doc/appdata2solv.1 b/doc/appdata2solv.1
new file mode 100644
index 0000000..174e25e
--- /dev/null
+++ b/doc/appdata2solv.1
@@ -0,0 +1,58 @@
+'\" t
+.\"     Title: appdata2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "APPDATA2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+appdata2solv \- convert application meta data into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBappdata2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The appdata format contains metadata about application\&. It can be available both in repositories (for available applications) and in the installed system (for installed applications)\&. The appdata2solv tool reads the metadata from stdin and writes the parsed data as solv file to standard output\&. The parser will create \fBapplication:\fR pseudo packages for each entry\&.
+.PP
+\fB\-d\fR \fIAPPDATADIR\fR
+.RS 4
+Do not read from standard input, instead scan the specified directory for appdata entries\&.
+\fIAPPDATADIR\fR
+is normally set to
+\fB/usr/share/appdata\fR\&.
+.RE
+.PP
+\fB\-r\fR \fIROOTDIR\fR
+.RS 4
+Use
+\fIROOTDIR\fR
+as root directory\&.
+.RE
+.SH "SEE ALSO"
+.sp
+mergesolv(1)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/appdata2solv.txt b/doc/appdata2solv.txt
new file mode 100644
index 0000000..3ccb4b5
--- /dev/null
+++ b/doc/appdata2solv.txt
@@ -0,0 +1,39 @@
+appdata2solv(1)
+===============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+appdata2solv - convert application meta data into a solv file
+
+Synopsis
+--------
+*appdata2solv* ['OPTIONS']
+
+Description
+-----------
+The appdata format contains metadata about application. It can
+be available both in repositories (for available applications)
+and in the installed system (for installed applications).
+The appdata2solv tool reads the metadata from stdin and
+writes the parsed data as solv file to standard output. The
+parser will create *application:* pseudo packages for each entry.
+
+*-d* 'APPDATADIR'::
+Do not read from standard input, instead scan the specified
+directory for appdata entries. 'APPDATADIR' is normally
+set to */usr/share/appdata*.
+
+*-r* 'ROOTDIR'::
+Use 'ROOTDIR' as root directory.
+
+
+See Also
+--------
+mergesolv(1)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/archpkgs2solv.1 b/doc/archpkgs2solv.1
new file mode 100644
index 0000000..e4ef62d
--- /dev/null
+++ b/doc/archpkgs2solv.1
@@ -0,0 +1,59 @@
+'\" t
+.\"     Title: archpkgs2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "ARCHPKGS2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+archpkgs2solv \- convert one or more Arch package files into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBarchpkgs2solv\fR [\fIOPTIONS\fR] \fIPKG1\&.pkg\&.xz\fR \&...
+.SH "DESCRIPTION"
+.sp
+The archpkgs2solv tool converts the meta data from one or more Arch Linux packages into the solv file written to standard output\&.
+.PP
+\fB\-m\fR \fIMANIFESTFILE\fR
+.RS 4
+Read the rpm file names from the specified
+\fIMANIFESTFILE\fR\&. You can use
+\fB\-\fR
+to read the manifest from standard input\&.
+.RE
+.PP
+\fB\-0\fR
+.RS 4
+Use a null byte as line terminator for manifest files instead of a newline\&. This is useful if the file names can contain newlines\&. See also the
+\fB\-print0\fR
+option in
+\fBfind\fR\&.
+.RE
+.SH "SEE ALSO"
+.sp
+pacman(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/archpkgs2solv.txt b/doc/archpkgs2solv.txt
new file mode 100644
index 0000000..2a17066
--- /dev/null
+++ b/doc/archpkgs2solv.txt
@@ -0,0 +1,35 @@
+archpkgs2solv(1)
+================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+archpkgs2solv - convert one or more Arch package files into a solv file
+
+Synopsis
+--------
+*archpkgs2solv* ['OPTIONS'] 'PKG1.pkg.xz' ...
+
+Description
+-----------
+The archpkgs2solv tool converts the meta data from one or more
+Arch Linux packages into the solv file written to standard output.
+
+*-m* 'MANIFESTFILE'::
+Read the rpm file names from the specified 'MANIFESTFILE'. You can
+use *-* to read the manifest from standard input.
+
+*-0*::
+Use a null byte as line terminator for manifest files instead of
+a newline. This is useful if the file names can contain newlines.
+See also the *-print0* option in *find*.
+
+See Also
+--------
+pacman(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/archrepo2solv.1 b/doc/archrepo2solv.1
new file mode 100644
index 0000000..4987821
--- /dev/null
+++ b/doc/archrepo2solv.1
@@ -0,0 +1,52 @@
+'\" t
+.\"     Title: archrepo2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "ARCHREPO2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+archrepo2solv \- convert files in Arch repository format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBarchrepo2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The archrepo2solv tool reads Arch Linux repository data (\fBcore\&.db\fR) from stdin, and writes it as solv file to standard output\&.
+.PP
+\fB\-l\fR \fIDATABASEDIR\fR
+.RS 4
+Instead of reading from standard input, scan the specified directory for package meta files\&. Set
+\fIDATABASEDIR\fR
+to
+\fB/var/lib/pacman/local\fR
+to scan the installed packages\&.
+.RE
+.SH "SEE ALSO"
+.sp
+pacman(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/archrepo2solv.txt b/doc/archrepo2solv.txt
new file mode 100644
index 0000000..3f5b138
--- /dev/null
+++ b/doc/archrepo2solv.txt
@@ -0,0 +1,31 @@
+archrepo2solv(1)
+================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+archrepo2solv - convert files in Arch repository format into a solv file
+
+Synopsis
+--------
+*archrepo2solv* ['OPTIONS']
+
+Description
+-----------
+The archrepo2solv tool reads Arch Linux repository data (*core.db*) from stdin,
+and writes it as solv file to standard output.
+
+*-l* 'DATABASEDIR'::
+Instead of reading from standard input, scan the specified directory for
+package meta files. Set 'DATABASEDIR' to */var/lib/pacman/local* to
+scan the installed packages.
+
+See Also
+--------
+pacman(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/comps2solv.1 b/doc/comps2solv.1
new file mode 100644
index 0000000..e8ec2f7
--- /dev/null
+++ b/doc/comps2solv.1
@@ -0,0 +1,43 @@
+'\" t
+.\"     Title: comps2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "COMPS2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+comps2solv \- convert rpm\-md comps\&.xml file into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBcomps2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The comps\&.xml file is Fedora\(cqs way to implement package groups\&. The comps2solv tool reads the comps xml file from stdin and writes the parsed data as solv file to standard output\&. The parser will create \fBgroup:\fR and \fBcategory:\fR pseudo packages for each comps entry\&.
+.SH "SEE ALSO"
+.sp
+mergesolv(1), createrepo(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/comps2solv.txt b/doc/comps2solv.txt
new file mode 100644
index 0000000..23e304e
--- /dev/null
+++ b/doc/comps2solv.txt
@@ -0,0 +1,29 @@
+comps2solv(1)
+=============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+comps2solv - convert rpm-md comps.xml file into a solv file
+
+Synopsis
+--------
+*comps2solv* ['OPTIONS']
+
+Description
+-----------
+The comps.xml file is Fedora's way to implement package groups.
+The comps2solv tool reads the comps xml file from stdin and
+writes the parsed data as solv file to standard output. The
+parser will create *group:* and *category:* pseudo packages
+for each comps entry.
+
+See Also
+--------
+mergesolv(1), createrepo(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/deb2solv.1 b/doc/deb2solv.1
new file mode 100644
index 0000000..4cfa093
--- /dev/null
+++ b/doc/deb2solv.1
@@ -0,0 +1,59 @@
+'\" t
+.\"     Title: deb2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "DEB2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+deb2solv \- convert one or more Debian package files into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBdeb2solv\fR [\fIOPTIONS\fR] \fIPKG1\&.deb\fR \&...
+.SH "DESCRIPTION"
+.sp
+The deb2solv tool converts the meta data from one or more Debian packages into the solv file written to standard output\&.
+.PP
+\fB\-m\fR \fIMANIFESTFILE\fR
+.RS 4
+Read the rpm file names from the specified
+\fIMANIFESTFILE\fR\&. You can use
+\fB\-\fR
+to read the manifest from standard input\&.
+.RE
+.PP
+\fB\-0\fR
+.RS 4
+Use a null byte as line terminator for manifest files instead of a newline\&. This is useful if the file names can contain newlines\&. See also the
+\fB\-print0\fR
+option in
+\fBfind\fR\&.
+.RE
+.SH "SEE ALSO"
+.sp
+deb(5), dpkg\-deb(1)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/deb2solv.txt b/doc/deb2solv.txt
new file mode 100644
index 0000000..0907383
--- /dev/null
+++ b/doc/deb2solv.txt
@@ -0,0 +1,35 @@
+deb2solv(1)
+============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+deb2solv - convert one or more Debian package files into a solv file
+
+Synopsis
+--------
+*deb2solv* ['OPTIONS'] 'PKG1.deb' ...
+
+Description
+-----------
+The deb2solv tool converts the meta data from one or more
+Debian packages into the solv file written to standard output.
+
+*-m* 'MANIFESTFILE'::
+Read the rpm file names from the specified 'MANIFESTFILE'. You can
+use *-* to read the manifest from standard input.
+
+*-0*::
+Use a null byte as line terminator for manifest files instead of
+a newline. This is useful if the file names can contain newlines.
+See also the *-print0* option in *find*.
+
+See Also
+--------
+deb(5), dpkg-deb(1)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/deltainfoxml2solv.1 b/doc/deltainfoxml2solv.1
new file mode 100644
index 0000000..844c4fb
--- /dev/null
+++ b/doc/deltainfoxml2solv.1
@@ -0,0 +1,43 @@
+'\" t
+.\"     Title: deltainfoxml2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "DELTAINFOXML2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+deltainfoxml2solv \- convert rpm\-md\*(Aqs deltainfo format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBdeltainfoxml2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The deltainfoxml2solv tool reads rpm\-md\(cqs \fBdeltainfo\&.xml\fR data from stdin, and writes it as solv file to standard output\&. Some distributions name the input \fBprestodelta\&.xml\fR instead\&. Each delta rpm element is converted and added as \fBrepository:deltainfo\fR element to the meta section of the solv file\&.
+.SH "SEE ALSO"
+.sp
+mergesolv(1), createrepo(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/deltainfoxml2solv.txt b/doc/deltainfoxml2solv.txt
new file mode 100644
index 0000000..f14a843
--- /dev/null
+++ b/doc/deltainfoxml2solv.txt
@@ -0,0 +1,29 @@
+deltainfoxml2solv(1)
+====================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+deltainfoxml2solv - convert rpm-md's deltainfo format into a solv file
+
+Synopsis
+--------
+*deltainfoxml2solv* ['OPTIONS']
+
+Description
+-----------
+The deltainfoxml2solv tool reads rpm-md's *deltainfo.xml* data from stdin,
+and writes it as solv file to standard output. Some distributions name
+the input *prestodelta.xml* instead. Each delta rpm element is converted
+and added as *repository:deltainfo* element to the meta section of the
+solv file.
+
+See Also
+--------
+mergesolv(1), createrepo(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/dumpsolv.1 b/doc/dumpsolv.1
new file mode 100644
index 0000000..3e1400e
--- /dev/null
+++ b/doc/dumpsolv.1
@@ -0,0 +1,45 @@
+'\" t
+.\"     Title: dumpsolv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/22/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "DUMPSOLV" "1" "09/22/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+dumpsolv \- print a solv file into a human readable format
+.SH "SYNOPSIS"
+.sp
+\fBdumpsolv\fR [\fIOPTIONS\fR] [\fIFILE\&.solv\fR]
+.SH "DESCRIPTION"
+.sp
+The dumpsolv tool reads a solv files and writes its contents to standard output\&. If no input file is given, it reads the solv file from standard input\&.
+.PP
+\fB\-j\fR
+.RS 4
+Write the contents in JSON format\&.
+.RE
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/dumpsolv.txt b/doc/dumpsolv.txt
new file mode 100644
index 0000000..ec2d771
--- /dev/null
+++ b/doc/dumpsolv.txt
@@ -0,0 +1,26 @@
+dumpsolv(1)
+===========
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+dumpsolv - print a solv file into a human readable format
+
+Synopsis
+--------
+*dumpsolv* ['OPTIONS'] ['FILE.solv']
+
+Description
+-----------
+The dumpsolv tool reads a solv files and writes its contents
+to standard output. If no input file is given, it reads the
+solv file from standard input.
+
+*-j*::
+Write the contents in JSON format.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/helix2solv.1 b/doc/helix2solv.1
new file mode 100644
index 0000000..5a8d678
--- /dev/null
+++ b/doc/helix2solv.1
@@ -0,0 +1,40 @@
+'\" t
+.\"     Title: helix2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "HELIX2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+helix2solv \- convert legacy helixcode format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBhelix2solv\fR
+.SH "DESCRIPTION"
+.sp
+The helix format was a metadata format used in the RedCarpet package manager\&. It\(cqs still used in libzypp testcases\&. The helix2solv tool reads data in helix format from standhard input and write it in solv file format to standard output\&.
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/helix2solv.txt b/doc/helix2solv.txt
new file mode 100644
index 0000000..db8dfe9
--- /dev/null
+++ b/doc/helix2solv.txt
@@ -0,0 +1,24 @@
+helix2solv(1)
+=============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+helix2solv - convert legacy helixcode format into a solv file
+
+Synopsis
+--------
+*helix2solv*
+
+Description
+-----------
+The helix format was a metadata format used in the RedCarpet
+package manager. It's still used in libzypp testcases.
+The helix2solv tool reads data in helix format from standhard
+input and write it in solv file format to standard output.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/installcheck.1 b/doc/installcheck.1
new file mode 100644
index 0000000..85e4d89
--- /dev/null
+++ b/doc/installcheck.1
@@ -0,0 +1,42 @@
+'\" t
+.\"     Title: installcheck
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/22/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "INSTALLCHECK" "1" "09/22/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+installcheck \- find out which packages cannot be installed
+.SH "SYNOPSIS"
+.sp
+\fBinstallcheck\fR \fIARCH\fR \fIREPO1\fR \fIREPO2\fR\&... \fB\-\-nocheck\fR \fINREPO1\fR \fINREPO2\fR\&...
+.SH "DESCRIPTION"
+.sp
+The installcheck tool checks if all packages in \fIREPO1\fR\&...\fIREPON\fR are installable\&. A package is installable if there is a set of packages from the repositories that satisfies its dependencies\&. The repositories after the \fB\-\-nocheck\fR option are only used for dependency resolving, but the tool does not check if the packages in them are installable\&.
+.sp
+A Repository can be a solv file, a rpmmd \fBprimary\&.xml\&.gz\fR file, a SUSE \fBpackages\fR or \fBpackages\&.gz\fR file, or a Debian \fBPackages\fR or \fBPackages\&.gz\fR file\&.
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/installcheck.txt b/doc/installcheck.txt
new file mode 100644
index 0000000..99eb279
--- /dev/null
+++ b/doc/installcheck.txt
@@ -0,0 +1,29 @@
+installcheck(1)
+===============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+installcheck - find out which packages cannot be installed
+
+Synopsis
+--------
+*installcheck* 'ARCH' 'REPO1' 'REPO2'... *--nocheck* 'NREPO1' 'NREPO2'...
+
+Description
+-----------
+The installcheck tool checks if all packages in 'REPO1'...'REPON' are
+installable. A package is installable if there is a set of packages
+from the repositories that satisfies its dependencies. The repositories
+after the *--nocheck* option are only used for dependency resolving,
+but the tool does not check if the packages in them are installable.
+
+A Repository can be a solv file, a rpmmd *primary.xml.gz* file, a SUSE
+*packages* or *packages.gz* file, or a Debian *Packages* or *Packages.gz*
+file.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/libsolv-bindings.3 b/doc/libsolv-bindings.3
index 87e949a..1f52285 100644
--- a/doc/libsolv-bindings.3
+++ b/doc/libsolv-bindings.3
@@ -2,12 +2,12 @@
 .\"     Title: Libsolv-Bindings
 .\"    Author: [see the "Author" section]
 .\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
-.\"      Date: 04/04/2014
+.\"      Date: 09/29/2014
 .\"    Manual: LIBSOLV
 .\"    Source: libsolv
 .\"  Language: English
 .\"
-.TH "LIBSOLV\-BINDINGS" "3" "04/04/2014" "libsolv" "LIBSOLV"
+.TH "LIBSOLV\-BINDINGS" "3" "09/29/2014" "libsolv" "LIBSOLV"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -307,7 +307,7 @@ Note that boolean methods have an added trailing \(lq?\(rq, to be consistent wit
 .RS 4
 .\}
 .nf
-\fBputs "empty\fR \fIrepo\fR\fB" if\fR \fIrepo\fR\fB\&.isempty?\fR
+\fBputs "empty" if\fR \fIrepo\fR\fB\&.isempty?\fR
 .fi
 .if n \{\
 .RE
@@ -3435,6 +3435,21 @@ Make the SOLVER_FORCEBEST job option consider only packages that meet the polici
 .RS 4
 Do not enable auto\-targeting up update and distupgrade jobs\&. See the section on targeted updates for more information\&.
 .RE
+.PP
+\fBSOLVER_FLAG_KEEP_ORPHANS\fR
+.RS 4
+Do not allow orphaned packages to be deinstalled if they get in the way of resolving other packages\&.
+.RE
+.PP
+\fBSOLVER_FLAG_BREAK_ORPHANS\fR
+.RS 4
+Ignore dependencies of orphaned packages that get in the way of resolving non\-orphaned ones\&. Setting the flag might result in no longer working packages in case they are orphaned\&.
+.RE
+.PP
+\fBSOLVER_FLAG_FOCUS_INSTALLED\fR
+.RS 4
+Resolve installed packages before resolving the given job\&. Setting this flag means that the solver will prefer picking a package version that fits the other installed packages over updating installed packages\&.
+.RE
 .sp
 Basic rule types:
 .PP
@@ -3443,9 +3458,9 @@ Basic rule types:
 A rule of an unknown class\&. You should never encounter those\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM\fR
+\fBSOLVER_RULE_PKG\fR
 .RS 4
-A package dependency rule, called rpm rule for historical reasons\&.
+A package dependency rule\&.
 .RE
 .PP
 \fBSOLVER_RULE_UPDATE\fR
@@ -3485,47 +3500,47 @@ These rules are generated by the solver to keep it from running into the same pr
 .sp
 Special dependency rule types:
 .PP
-\fBSOLVER_RULE_RPM_NOT_INSTALLABLE\fR
+\fBSOLVER_RULE_PKG_NOT_INSTALLABLE\fR
 .RS 4
 This rule was added to prevent the installation of a package of an architecture that does not work on the system\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_NOTHING_PROVIDES_DEP\fR
+\fBSOLVER_RULE_PKG_NOTHING_PROVIDES_DEP\fR
 .RS 4
 The package contains a required dependency which was not provided by any package\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_PACKAGE_REQUIRES\fR
+\fBSOLVER_RULE_PKG_REQUIRES\fR
 .RS 4
-Similar to SOLVER_RULE_RPM_NOTHING_PROVIDES_DEP, but in this case some packages provided the dependency but none of them could be installed due to other dependency issues\&.
+Similar to SOLVER_RULE_PKG_NOTHING_PROVIDES_DEP, but in this case some packages provided the dependency but none of them could be installed due to other dependency issues\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_SELF_CONFLICT\fR
+\fBSOLVER_RULE_PKG_SELF_CONFLICT\fR
 .RS 4
 The package conflicts with itself\&. This is not allowed by older rpm versions\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_PACKAGE_CONFLICT\fR
+\fBSOLVER_RULE_PKG_CONFLICTS\fR
 .RS 4
 To fulfill the dependencies two packages need to be installed, but one of the packages contains a conflict with the other one\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_SAME_NAME\fR
+\fBSOLVER_RULE_PKG_SAME_NAME\fR
 .RS 4
 The dependencies can only be fulfilled by multiple versions of a package, but installing multiple versions of the same package is not allowed\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_PACKAGE_OBSOLETES\fR
+\fBSOLVER_RULE_PKG_OBSOLETES\fR
 .RS 4
 To fulfill the dependencies two packages need to be installed, but one of the packages obsoletes the other one\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_IMPLICIT_OBSOLETES\fR
+\fBSOLVER_RULE_PKG_IMPLICIT_OBSOLETES\fR
 .RS 4
 To fulfill the dependencies two packages need to be installed, but one of the packages has provides a dependency that is obsoleted by the other one\&. See the POOL_FLAG_IMPLICITOBSOLETEUSESPROVIDES flag\&.
 .RE
 .PP
-\fBSOLVER_RULE_RPM_INSTALLEDPKG_OBSOLETES\fR
+\fBSOLVER_RULE_PKG_INSTALLED_OBSOLETES\fR
 .RS 4
 To fulfill the dependencies a package needs to be installed that is obsoleted by an installed package\&. See the POOL_FLAG_NOINSTALLEDOBSOLETES flag\&.
 .RE
diff --git a/doc/libsolv-bindings.txt b/doc/libsolv-bindings.txt
index b4f5609..2b51635 100644
--- a/doc/libsolv-bindings.txt
+++ b/doc/libsolv-bindings.txt
@@ -138,7 +138,7 @@ Constants live in the namespace of the class they belong to:
 Note that boolean methods have an added trailing ``?'', to be consistent with
 other ruby modules:
 
-	puts "empty repo" if repo.isempty?
+	puts "empty" if repo.isempty?
 
 
 The Solv Class
@@ -2101,8 +2101,8 @@ Basic rule types:
 *SOLVER_RULE_UNKNOWN*::
 A rule of an unknown class. You should never encounter those.
 
-*SOLVER_RULE_RPM*::
-A package dependency rule, called rpm rule for historical reasons.
+*SOLVER_RULE_PKG*::
+A package dependency rule.
 
 *SOLVER_RULE_UPDATE*::
 A rule to implement the update policy of installed packages. Every
@@ -2142,43 +2142,43 @@ implementations.
 
 Special dependency rule types:
 
-*SOLVER_RULE_RPM_NOT_INSTALLABLE*::
+*SOLVER_RULE_PKG_NOT_INSTALLABLE*::
 This rule was added to prevent the installation of a package of an
 architecture that does not work on the system.
 
-*SOLVER_RULE_RPM_NOTHING_PROVIDES_DEP*::
+*SOLVER_RULE_PKG_NOTHING_PROVIDES_DEP*::
 The package contains a required dependency which was not provided by
 any package.
 
-*SOLVER_RULE_RPM_PACKAGE_REQUIRES*::
-Similar to SOLVER_RULE_RPM_NOTHING_PROVIDES_DEP, but in this case
+*SOLVER_RULE_PKG_REQUIRES*::
+Similar to SOLVER_RULE_PKG_NOTHING_PROVIDES_DEP, but in this case
 some packages provided the dependency but none of them could be
 installed due to other dependency issues.
 
-*SOLVER_RULE_RPM_SELF_CONFLICT*::
+*SOLVER_RULE_PKG_SELF_CONFLICT*::
 The package conflicts with itself. This is not allowed by older rpm
 versions.
 
-*SOLVER_RULE_RPM_PACKAGE_CONFLICT*::
+*SOLVER_RULE_PKG_CONFLICTS*::
 To fulfill the dependencies two packages need to be installed, but
 one of the packages contains a conflict with the other one.
 
-*SOLVER_RULE_RPM_SAME_NAME*::
+*SOLVER_RULE_PKG_SAME_NAME*::
 The dependencies can only be fulfilled by multiple versions of
 a package, but installing multiple versions of the same package
 is not allowed.
 
-*SOLVER_RULE_RPM_PACKAGE_OBSOLETES*::
+*SOLVER_RULE_PKG_OBSOLETES*::
 To fulfill the dependencies two packages need to be installed, but
 one of the packages obsoletes the other one.
 
-*SOLVER_RULE_RPM_IMPLICIT_OBSOLETES*::
+*SOLVER_RULE_PKG_IMPLICIT_OBSOLETES*::
 To fulfill the dependencies two packages need to be installed, but
 one of the packages has provides a dependency that is obsoleted
 by the other one. See the POOL_FLAG_IMPLICITOBSOLETEUSESPROVIDES
 flag.
 
-*SOLVER_RULE_RPM_INSTALLEDPKG_OBSOLETES*::
+*SOLVER_RULE_PKG_INSTALLED_OBSOLETES*::
 To fulfill the dependencies a package needs to be installed that is
 obsoleted by an installed package. See the POOL_FLAG_NOINSTALLEDOBSOLETES
 flag.
diff --git a/doc/libsolv-constantids.3 b/doc/libsolv-constantids.3
index 45e717e..8511667 100644
--- a/doc/libsolv-constantids.3
+++ b/doc/libsolv-constantids.3
@@ -89,7 +89,7 @@ Stores an array of dependency Ids that describe the capabilities that also must
 .PP
 \fBSOLVABLE_RECOMMENDS "solvable:recommends"\fR
 .RS 4
-Stores an array of dependency Ids that describe the capabilities that also should be installed when this package is installed\&. It\(cqs not an error if not all capabilites can be met\&.
+Stores an array of dependency Ids that describe the capabilities that also should be installed when this package is installed\&. It\(cqs not an error if not all capabilities can be met\&.
 .RE
 .PP
 \fBSOLVABLE_SUGGESTS "solvable:suggests"\fR
diff --git a/doc/libsolv-pool.3 b/doc/libsolv-pool.3
index 748f112..0db9f8d 100644
--- a/doc/libsolv-pool.3
+++ b/doc/libsolv-pool.3
@@ -1241,7 +1241,7 @@ There can be multiple equivalence classes, the set of allowed vendor changes for
 You can turn off the architecture replacement checks with the Solver\(cqs SOLVER_FLAG_ALLOW_VENDORCHANGE flag\&.
 .SH "BOOLEAN DEPENDENCIES"
 .sp
-Boolean Dependencies allow to build complex expressions from simple dependencies\&. While rpm does not support boolean expressions in dependencies and debian only allows an "OR" expression, libsolv allows to arbitrary complex expressions\&. The following basic types are supported:
+Boolean Dependencies allow to build complex expressions from simple dependencies\&. While rpm does not support boolean expressions in dependencies and debian only allows an "OR" expression, libsolv allows one to arbitrary complex expressions\&. The following basic types are supported:
 .PP
 \fBREL_OR\fR
 .RS 4
diff --git a/doc/mdk2solv.1 b/doc/mdk2solv.1
new file mode 100644
index 0000000..a32118a
--- /dev/null
+++ b/doc/mdk2solv.1
@@ -0,0 +1,53 @@
+'\" t
+.\"     Title: mdk2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "MDK2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+mdk2solv \- convert files in Mandriva synthesis format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBmdk2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The mdk2solv tool reads Mandriva synthesis data (\fBhdlist\fR) from stdin, and writes it as solv file to standard output\&.
+.PP
+\fB\-i\fR \fIINFO\&.xml\fR
+.RS 4
+Also read the info file containing url, license, and src information from the specified xml file\&.
+.RE
+.PP
+\fB\-f\fR \fIFILES\&.xml\fR
+.RS 4
+Also read filelist information from the specified xml file\&.
+.RE
+.SH "SEE ALSO"
+.sp
+genhdlist2(1)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/mdk2solv.txt b/doc/mdk2solv.txt
new file mode 100644
index 0000000..2616a87
--- /dev/null
+++ b/doc/mdk2solv.txt
@@ -0,0 +1,33 @@
+mdk2solv(1)
+===========
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+mdk2solv - convert files in Mandriva synthesis format into a solv file
+
+Synopsis
+--------
+*mdk2solv* ['OPTIONS']
+
+Description
+-----------
+The mdk2solv tool reads Mandriva synthesis data (*hdlist*) from stdin, and writes
+it as solv file to standard output.
+
+*-i* 'INFO.xml'::
+Also read the info file containing url, license, and src information from
+the specified xml file.
+
+*-f* 'FILES.xml'::
+Also read filelist information from the specified xml file.
+
+See Also
+--------
+genhdlist2(1)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/mergesolv.1 b/doc/mergesolv.1
new file mode 100644
index 0000000..e7cdd26
--- /dev/null
+++ b/doc/mergesolv.1
@@ -0,0 +1,45 @@
+'\" t
+.\"     Title: mergesolv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/22/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "MERGESOLV" "1" "09/22/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+mergesolv \- merge multiple files in solv format into a single one
+.SH "SYNOPSIS"
+.sp
+\fBmergesolv\fR [\fIOPTIONS\fR] \fIFILE1\&.solv\fR \fIFILE2\&.solv\fR \&...
+.SH "DESCRIPTION"
+.sp
+The mergesolv tool reads all solv files specified on the command line, and writes a merged version to standard output\&.
+.PP
+\fB\-X\fR
+.RS 4
+Autoexpand SUSE pattern and product provides into packages\&.
+.RE
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/mergesolv.txt b/doc/mergesolv.txt
new file mode 100644
index 0000000..bbe8c72
--- /dev/null
+++ b/doc/mergesolv.txt
@@ -0,0 +1,25 @@
+mergesolv(1)
+============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+mergesolv - merge multiple files in solv format into a single one
+
+Synopsis
+--------
+*mergesolv* ['OPTIONS'] 'FILE1.solv' 'FILE2.solv' ...
+
+Description
+-----------
+The mergesolv tool reads all solv files specified on the command line,
+and writes a merged version to standard output.
+
+*-X*::
+Autoexpand SUSE pattern and product provides into packages.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/repomdxml2solv.1 b/doc/repomdxml2solv.1
new file mode 100644
index 0000000..d00fa02
--- /dev/null
+++ b/doc/repomdxml2solv.1
@@ -0,0 +1,57 @@
+'\" t
+.\"     Title: repomdxml2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "REPOMDXML2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+repomdxml2solv \- convert a repomd\&.xml file into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBrepomdxml2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The repomd\&.xml file is the index file of a rpm\-md repository, containing references to all data file with checksums\&. The repomdxml2solv tool reads the repomd\&.xml file from stdin and writes the parsed data as solv file to standard output\&. The data is stored as meta attributes in the result\&.
+.PP
+\fB\-q\fR \fIWHAT\fR
+.RS 4
+Data query mode: instead of writing a solv file, select the
+\fIWHAT\fR
+element in the input data and write it to standard output\&. Examples for
+\fIWHAT\fR
+are
+\fBtype\fR
+to get a list of all types, and
+\fBprimary:location\fR
+to get the location of the element with type
+\fBprimary\fR\&.
+.RE
+.SH "SEE ALSO"
+.sp
+rpmmd2solv(1), mergesolv(1), createrepo(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/repomdxml2solv.txt b/doc/repomdxml2solv.txt
new file mode 100644
index 0000000..feb859c
--- /dev/null
+++ b/doc/repomdxml2solv.txt
@@ -0,0 +1,36 @@
+repomdxml2solv(1)
+=================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+repomdxml2solv - convert a repomd.xml file into a solv file
+
+Synopsis
+--------
+*repomdxml2solv* ['OPTIONS']
+
+Description
+-----------
+The repomd.xml file is the index file of a rpm-md repository,
+containing references to all data file with checksums. The
+repomdxml2solv tool reads the repomd.xml file from stdin and
+writes the parsed data as solv file to standard output. The
+data is stored as meta attributes in the result.
+
+*-q* 'WHAT'::
+Data query mode: instead of writing a solv file, select the
+'WHAT' element in the input data and write it to standard output.
+Examples for 'WHAT' are *type* to get a list of all types, and
+*primary:location* to get the location of the element with
+type *primary*.
+
+See Also
+--------
+rpmmd2solv(1), mergesolv(1), createrepo(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/rpmdb2solv.1 b/doc/rpmdb2solv.1
new file mode 100644
index 0000000..5057b57
--- /dev/null
+++ b/doc/rpmdb2solv.1
@@ -0,0 +1,95 @@
+'\" t
+.\"     Title: rpmdb2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/25/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "RPMDB2SOLV" "1" "09/25/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+rpmdb2solv \- convert the rpm database into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBrpmdb2solv\fR [\fIOPTIONS\fR] [\fIREFFILE\&.solv\fR]
+.SH "DESCRIPTION"
+.sp
+The rpmdb2solv tool reads rpm\(cqs installed packages database and writes it in solv file format to standard output\&. You can make use of an old version of the database by specifying a \fIREFFILE\&.solv\fR file\&.
+.PP
+\fB\-o\fR \fIOUTFILE\fR
+.RS 4
+Write the generated solv to
+\fIOUTFILE\fR
+instead of standard output\&.
+.RE
+.PP
+\fB\-P\fR
+.RS 4
+Print percentages as packages are being read in\&. The output format is like rpm\(cqs \-\-percent option\&.
+.RE
+.PP
+\fB\-r\fR \fIROOTDIR\fR
+.RS 4
+Use
+\fIROOTDIR\fR
+as root directory\&.
+.RE
+.PP
+\fB\-k\fR
+.RS 4
+Read pubkeys from the rpm database instead of installed packages\&. Note that many distributions stopped storing pubkeys in the database but use a directory like
+\fB/var/lib/rpm/pubkeys\fR
+instead\&.
+.RE
+.PP
+\fB\-A\fR
+.RS 4
+Also scan the
+\fB/usr/share/appdata\fR
+for installed appdata files and create pseudo packages for each file\&.
+.RE
+.PP
+\fB\-p\fR \fIPRODDIR\fR
+.RS 4
+Also read SUSE product files from directory
+\fIPRODDIR\fR\&. The standard directory is
+\fB/etc/products\&.d\fR\&.
+.RE
+.PP
+\fB\-n\fR
+.RS 4
+Do not read any packages from the rpm database\&. This is useful together with
+\fB\-p\fR
+to only convert SUSE products\&.
+.RE
+.PP
+\fB\-X\fR
+.RS 4
+Autoexpand SUSE pattern and product provides into packages\&.
+.RE
+.SH "SEE ALSO"
+.sp
+rpms2solv(1)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/rpmdb2solv.txt b/doc/rpmdb2solv.txt
new file mode 100644
index 0000000..0c4585f
--- /dev/null
+++ b/doc/rpmdb2solv.txt
@@ -0,0 +1,59 @@
+rpmdb2solv(1)
+=============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+rpmdb2solv - convert the rpm database into a solv file
+
+Synopsis
+--------
+*rpmdb2solv* ['OPTIONS'] ['REFFILE.solv']
+
+Description
+-----------
+The rpmdb2solv tool reads rpm's installed packages database
+and writes it in solv file format to standard output. You can
+make use of an old version of the database by specifying a
+'REFFILE.solv' file.
+
+*-o* 'OUTFILE'::
+Write the generated solv to 'OUTFILE' instead of standard output.
+
+*-P*::
+Print percentages as packages are being read in. The output
+format is like rpm's --percent option.
+
+*-r* 'ROOTDIR'::
+Use 'ROOTDIR' as root directory.
+
+*-k*::
+Read pubkeys from the rpm database instead of installed packages.
+Note that many distributions stopped storing pubkeys in the
+database but use a directory like */var/lib/rpm/pubkeys*
+instead.
+
+*-A*::
+Also scan the */usr/share/appdata* for installed appdata files
+and create pseudo packages for each file.
+
+*-p* 'PRODDIR'::
+Also read SUSE product files from directory 'PRODDIR'. The
+standard directory is */etc/products.d*.
+
+*-n*::
+Do not read any packages from the rpm database. This is useful
+together with *-p* to only convert SUSE products.
+
+*-X*::
+Autoexpand SUSE pattern and product provides into packages.
+
+See Also
+--------
+rpms2solv(1)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/rpmmd2solv.1 b/doc/rpmmd2solv.1
new file mode 100644
index 0000000..249d801
--- /dev/null
+++ b/doc/rpmmd2solv.1
@@ -0,0 +1,48 @@
+'\" t
+.\"     Title: rpmmd2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "RPMMD2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+rpmmd2solv \- convert files in rpm\-md format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBrpmmd2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The rpmmd2solv tool reads rpm\-md xml data from stdin, and writes it as solv file to standard output\&. It understands the \fBprimary\fR, \fBfilelist\fR, \fBother\fR, and \fBsusedata\fR format\&.
+.PP
+\fB\-X\fR
+.RS 4
+Autoexpand SUSE pattern and product provides into packages\&.
+.RE
+.SH "SEE ALSO"
+.sp
+repomdxml2solv(1), mergesolv(1), createrepo(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/rpmmd2solv.txt b/doc/rpmmd2solv.txt
new file mode 100644
index 0000000..c72ccc9
--- /dev/null
+++ b/doc/rpmmd2solv.txt
@@ -0,0 +1,30 @@
+rpmmd2solv(1)
+=============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+rpmmd2solv - convert files in rpm-md format into a solv file
+
+Synopsis
+--------
+*rpmmd2solv* ['OPTIONS']
+
+Description
+-----------
+The rpmmd2solv tool reads rpm-md xml data from stdin, and writes
+it as solv file to standard output. It understands the *primary*,
+*filelist*, *other*, and *susedata* format.
+
+*-X*::
+Autoexpand SUSE pattern and product provides into packages.
+
+See Also
+--------
+repomdxml2solv(1), mergesolv(1), createrepo(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/rpms2solv.1 b/doc/rpms2solv.1
new file mode 100644
index 0000000..c6a2725
--- /dev/null
+++ b/doc/rpms2solv.1
@@ -0,0 +1,80 @@
+'\" t
+.\"     Title: rpms2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "RPMS2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+rpms2solv \- convert one or more rpms into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBrpms2solv\fR [\fIOPTIONS\fR] \fIRPM1\&.rpm\fR \&...
+.SH "DESCRIPTION"
+.sp
+The rpms2solv tool converts the header data from one or more rpms into the solv file written to standard output\&.
+.PP
+\fB\-m\fR \fIMANIFESTFILE\fR
+.RS 4
+Read the rpm file names from the specified
+\fIMANIFESTFILE\fR\&. You can use
+\fB\-\fR
+to read the manifest from standard input\&.
+.RE
+.PP
+\fB\-0\fR
+.RS 4
+Use a null byte as line terminator for manifest files instead of a newline\&. This is useful if the file names can contain newlines\&. See also the
+\fB\-print0\fR
+option in
+\fBfind\fR\&.
+.RE
+.PP
+\fB\-F\fR
+.RS 4
+Do not put all files from the headers into the file list, but instead use the filtering also found in
+\fBcreaterepo\fR\&.
+.RE
+.PP
+\fB\-k\fR
+.RS 4
+Read pubkeys instead of rpms\&.
+.RE
+.PP
+\fB\-K\fR
+.RS 4
+Read pubkey keyrings instead of rpms\&.
+.RE
+.PP
+\fB\-X\fR
+.RS 4
+Autoexpand SUSE pattern and product provides into packages\&.
+.RE
+.SH "SEE ALSO"
+.sp
+rpmdb2solv(1)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/rpms2solv.txt b/doc/rpms2solv.txt
new file mode 100644
index 0000000..244dffb
--- /dev/null
+++ b/doc/rpms2solv.txt
@@ -0,0 +1,48 @@
+rpms2solv(1)
+============
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+rpms2solv - convert one or more rpms into a solv file
+
+Synopsis
+--------
+*rpms2solv* ['OPTIONS'] 'RPM1.rpm' ...
+
+Description
+-----------
+The rpms2solv tool converts the header data from one or more
+rpms into the solv file written to standard output.
+
+*-m* 'MANIFESTFILE'::
+Read the rpm file names from the specified 'MANIFESTFILE'. You can
+use *-* to read the manifest from standard input.
+
+*-0*::
+Use a null byte as line terminator for manifest files instead of
+a newline. This is useful if the file names can contain newlines.
+See also the *-print0* option in *find*.
+
+*-F*::
+Do not put all files from the headers into the file list, but
+instead use the filtering also found in *createrepo*.
+
+*-k*::
+Read pubkeys instead of rpms.
+
+*-K*::
+Read pubkey keyrings instead of rpms.
+
+*-X*::
+Autoexpand SUSE pattern and product provides into packages.
+
+See Also
+--------
+rpmdb2solv(1)
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/susetags2solv.1 b/doc/susetags2solv.1
new file mode 100644
index 0000000..9ec9510
--- /dev/null
+++ b/doc/susetags2solv.1
@@ -0,0 +1,66 @@
+'\" t
+.\"     Title: susetags2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "SUSETAGS2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+susetags2solv \- convert the susetags repository format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBsusetags2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The susetags format is most as repository format on most products created by SUSE\&. The susetags2solv reads data from standard input, converts the format into a solv file, and writes it to standard output\&.
+.PP
+\fB\-c\fR \fICONTENTFILE\fR
+.RS 4
+Also parse the specified content file containing meta information about the repository\&.
+.RE
+.PP
+\fB\-q\fR \fIWHAT\fR
+.RS 4
+Data query mode: instead of writing a solv file, select the
+\fIWHAT\fR
+element in the input data and write it to standard output\&. An example for
+\fIWHAT\fR
+is
+\fBdefaultvendor\fR
+to get a default vendor for the repository\&.
+.RE
+.PP
+\fB\-M\fR \fIMERGEFILE\&.solv\fR
+.RS 4
+Merge the content of the specified solv file into the output\&.
+.RE
+.PP
+\fB\-X\fR
+.RS 4
+Autoexpand SUSE pattern and product provides into packages\&.
+.RE
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/susetags2solv.txt b/doc/susetags2solv.txt
new file mode 100644
index 0000000..9a2e2f1
--- /dev/null
+++ b/doc/susetags2solv.txt
@@ -0,0 +1,39 @@
+susetags2solv(1)
+================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+susetags2solv - convert the susetags repository format into a solv file
+
+Synopsis
+--------
+*susetags2solv* ['OPTIONS']
+
+Description
+-----------
+The susetags format is most as repository format on most products
+created by SUSE. The susetags2solv reads data from standard input,
+converts the format into a solv file, and writes it to standard output.
+
+*-c* 'CONTENTFILE'::
+Also parse the specified content file containing meta information
+about the repository.
+
+*-q* 'WHAT'::
+Data query mode: instead of writing a solv file, select the
+'WHAT' element in the input data and write it to standard output.
+An example for 'WHAT' is *defaultvendor* to get a default vendor for
+the repository.
+
+*-M* 'MERGEFILE.solv'::
+Merge the content of the specified solv file into the output.
+
+*-X*::
+Autoexpand SUSE pattern and product provides into packages.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/testsolv.1 b/doc/testsolv.1
new file mode 100644
index 0000000..faf97b6
--- /dev/null
+++ b/doc/testsolv.1
@@ -0,0 +1,62 @@
+'\" t
+.\"     Title: testsolv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/22/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "TESTSOLV" "1" "09/22/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+testsolv \- run a libsolv testcase through the solver
+.SH "SYNOPSIS"
+.sp
+\fBtestsolv\fR [\fIOPTIONS\fR] \fITESTCASE\fR
+.SH "DESCRIPTION"
+.sp
+The testsolv tools can be used to run a testcase\&. Testcases can either be manually created to test specific features, or they can be written by libsolv\(cqs testcase_write function\&. This is useful to evaluate bug reports about the solver\&.
+.PP
+\fB\-v\fR
+.RS 4
+Increase the debug level of the solver\&. This option can be specified multiple times to further increase the amount of debug data\&.
+.RE
+.PP
+\fB\-r\fR
+.RS 4
+Write the output in testcase format instead of human readable text\&. The output can then be used in the result section of the test case\&. If the
+\fB\-r\fR
+option is given twice, the output is formated for verbatim inclusion\&.
+.RE
+.PP
+\fB\-l\fR \fIPKGSPEC\fR
+.RS 4
+Instead of running the solver, list packages in the repositories\&.
+.RE
+.PP
+\fB\-s\fR \fISOLUTIONSPEC\fR
+.RS 4
+This is used in the solver test suite to test the calculated solutions to encountered problems\&.
+.RE
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/testsolv.txt b/doc/testsolv.txt
new file mode 100644
index 0000000..dc3a34e
--- /dev/null
+++ b/doc/testsolv.txt
@@ -0,0 +1,41 @@
+testsolv(1)
+===========
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+testsolv - run a libsolv testcase through the solver
+
+Synopsis
+--------
+*testsolv* ['OPTIONS'] 'TESTCASE'
+
+Description
+-----------
+The testsolv tools can be used to run a testcase. Testcases can
+either be manually created to test specific features, or they
+can be written by libsolv's testcase_write function. This is useful
+to evaluate bug reports about the solver.
+
+*-v*::
+Increase the debug level of the solver. This option can be specified
+multiple times to further increase the amount of debug data.
+
+*-r*::
+Write the output in testcase format instead of human readable text.
+The output can then be used in the result section of the test case.
+If the *-r* option is given twice, the output is formated for
+verbatim inclusion.
+
+*-l* 'PKGSPEC'::
+Instead of running the solver, list packages in the repositories.
+
+*-s* 'SOLUTIONSPEC'::
+This is used in the solver test suite to test the calculated solutions
+to encountered problems.
+
+Author
+------
+Michael Schroeder <mls@suse.de>
diff --git a/doc/updateinfoxml2solv.1 b/doc/updateinfoxml2solv.1
new file mode 100644
index 0000000..03c5cc7
--- /dev/null
+++ b/doc/updateinfoxml2solv.1
@@ -0,0 +1,43 @@
+'\" t
+.\"     Title: updateinfoxml2solv
+.\"    Author: [see the "Author" section]
+.\" Generator: DocBook XSL Stylesheets v1.78.0 <http://docbook.sf.net/>
+.\"      Date: 09/24/2014
+.\"    Manual: LIBSOLV
+.\"    Source: libsolv
+.\"  Language: English
+.\"
+.TH "UPDATEINFOXML2SOLV" "1" "09/24/2014" "libsolv" "LIBSOLV"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+updateinfoxml2solv \- convert rpm\-md\*(Aqs updateinfo\&.xml format into a solv file
+.SH "SYNOPSIS"
+.sp
+\fBupdateinfoxml2solv\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+The updateinfoxml2solv tool reads rpm\-md\(cqs updateinfo xml data from stdin, and writes it as solv file to standard output\&. Update elements are converted into special \fBpatch:\fR pseudo packages\&.
+.SH "SEE ALSO"
+.sp
+mergesolv(1), createrepo(8)
+.SH "AUTHOR"
+.sp
+Michael Schroeder <mls@suse\&.de>
diff --git a/doc/updateinfoxml2solv.txt b/doc/updateinfoxml2solv.txt
new file mode 100644
index 0000000..7e7c5fc
--- /dev/null
+++ b/doc/updateinfoxml2solv.txt
@@ -0,0 +1,27 @@
+updateinfoxml2solv(1)
+=====================
+:man manual: LIBSOLV
+:man source: libsolv
+
+
+Name
+----
+updateinfoxml2solv - convert rpm-md's updateinfo.xml format into a solv file
+
+Synopsis
+--------
+*updateinfoxml2solv* ['OPTIONS']
+
+Description
+-----------
+The updateinfoxml2solv tool reads rpm-md's updateinfo xml data from stdin,
+and writes it as solv file to standard output. Update elements are converted
+into special *patch:* pseudo packages.
+
+See Also
+--------
+mergesolv(1), createrepo(8)
+
+Author
+------
+Michael Schroeder <mls@suse.de>