Tizen 2.1 base

12 files changed, 2003 insertions, 0 deletions

diff --git a/packaging/change-udev-rules.diff b/packaging/change-udev-rules.diff
new file mode 100644
index 0000000..a791e71
--- /dev/null
+++ b/packaging/change-udev-rules.diff
@@ -0,0 +1,294 @@
+--- data/rules/55-hpmud.rules.orig	2011-12-09 12:19:54.000000000 +0100
++++ data/rules/55-hpmud.rules	2012-01-12 16:20:57.000000000 +0100
+@@ -12,142 +12,186 @@
+ #   3. This rules file is an attempt at being compatable with all distros. Feel free to make your own changes and if you feel your
+ #      changes are not distro specific please send your patch to us. 2/11/2009, D Suffield
+ #
++# SUSE changed:
++#
++# ATTRS{idVendor} to ATTR{idVendor} and
++# ATTRS{idProduct to ATTR{idProduct}
++# because ATTRS search all parents which wastes resources
++# while ATTR is sufficient here,
++# see https://bugzilla.novell.com/show_bug.cgi?id=436085
++#
++# MODE="660" to MODE="0664"
++# because it is sufficiently secure to let any user read the device nodes
++# because HPLIP opens the device nodes exclusively so that sniffing
++# of print jobs or scanner image data should not be possible and
++# read permissions for any user is required in particular for USB devices
++# so that any user can see the USB devices when he runs the command "lsusb".
++#
++# Added ENV{sane_hpaio}="yes" to all entries for USB devices
++# to get the SANE driver "hpaio" automatically activated in any case
++# (only scanners in HP parallel port all-in-one devices are ignored)
++# because not only "AiO products (0x03f0xx11)" can have scanner units
++# but also Photosmart products, inkjet printers, and laser printers
++# (e.g. the LaserJet 1220 03f0:0417 has a scanner unit).
++# An activated SANE driver does not cause continuous system load because
++# it is only run when the user launches a scanning frontend (e.g. xsane)
++# and then all what the driver does is to scan the USB device information
++# to find devices which belong to the driver and if nothing found it exits.
++# Additionally see https://bugzilla.novell.com/show_bug.cgi?id=469721#c9
++#
++# Added ENV{libsane_matched}="yes" to all entries for USB devices
++# to get normal user access permissions via udev, see
++# https://bugzilla.novell.com/show_bug.cgi?id=542473#c14
++#
++# Added same rule to disable USB autosuspend
++# as in /etc/udev/rules.d/55-libsane.rules
++#
+ 
+ ACTION!="add", GOTO="hpmud_rules_end"
+-SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0660"
++SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664"
+ SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="hplip_pid_test"
+ SUBSYSTEM!="usb_device", GOTO="hpmud_rules_end"
+ 
+ LABEL="hplip_pid_test"
+ 
+ # Check for AiO products (0x03f0xx11).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??11", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??11", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ 
+ # Check for Photosmart products without wildcard since cameras and scanners also used (0x03f0xx02). 
+ # The xx02 pid has been retired so this explicit list should not change.
+ # photosmart_d2300_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c302", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c302", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_100
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3802", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3802", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_1115
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3402", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3402", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_1215
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3202", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3202", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_1218
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3302", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3302", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_130
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3902", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3902", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_1315
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3602", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3602", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_140_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1002", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1002", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_230
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3502", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3502", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_240_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1102", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1102", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_320_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1202", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1202", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_330_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1602", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1602", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_370_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1302", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1302", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_380_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1702", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1702", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_420_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1502", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1502", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_470_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1802", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1802", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7150
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3a02", OWNER="root", GROUP="lp", MODE="660"
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3b02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3a02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3b02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7200_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="b002", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="b002", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7345
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2002", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2002", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7350 
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3c02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3c02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7400_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="b802", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="b802", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7550
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="3e02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="3e02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7600_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="b202", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="b202", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7700_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="b402", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="b402", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7800_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c002", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c002", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_7900_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="b602", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="b602", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_8000_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c102", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c102", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_8100_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="ba02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="ba02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_8200_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c202", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c202", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_8400_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="bb02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="bb02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_8700_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="bc02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="bc02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a310_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1d02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1d02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a320_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1e02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1e02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a430_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1902", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1902", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a440_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1f02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a510_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1a02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1a02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a520_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2602", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2602", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a530_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2b02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2b02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a610_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1b02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1b02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a620_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2702", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2702", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a630_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2c02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2c02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a710_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1c02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="1c02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_a820_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2902", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="2902", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_d5060_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c802", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c802", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_d5100_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c402", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c402", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_d6100_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c502", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c502", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_d7100_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c602", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c602", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_d7300_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="c702", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="c702", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_pro_b8300_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="be02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="be02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_b8800_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="d002", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="d002", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # photosmart_pro_b9100_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="bd02", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="bd02", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Photosmart_B8500_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="d102", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="d102", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Photosmart_A640_series
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="7902", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="7902", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ 
+ # Check for Business Inkjet products (0x03f0xx12).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??12", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??12", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Check for Deskjet products (0x03f0xx04).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??04", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??04", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Check for LaserJet products (0x03f0xx17).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??17", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??17", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Check for LaserJet products (0x03f0xx2a).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??2a", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??2a", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ # Check for DesignJet product (0x03f0xx14).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??14", OWNER="root", GROUP="lp", MODE="660"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??14", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes"
+ 
+ # Removed the following rule because FHS states that /etc should be reserved for static files only. This
+ # functionality should be done in a deb/rpm post install script.  2/11/2009, D Suffield
+ #
++# SUSE re-enabled it
++# because it is how it works with SANE regardless what FHS think how it should work.
++# Files in /etc/ are config files which can be adapted as needed during runtime.
++# Adapting /etc/sane.d/dll.conf only during package install time is insufficient
++# because a device may be not connected by the admin during package install time
++# but later during runtime by the system's end-user (e.g. on a company workstation).
++#
+ # If sane-bankends is installed add hpaio backend support to dll.conf if needed.
+-# ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c 'grep -q ^#hpaio /etc/sane.d/dll.conf;if [ $$? -eq 0 ];then sed -i -e s/^#hpaio/hpaio/ /etc/sane.d/dll.conf;else grep -q ^hpaio /etc/sane.d/dll.conf;if [ $$? -ne 0 ];then echo hpaio >>/etc/sane.d/dll.conf;fi;fi'"
++ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c 'grep -q ^#hpaio /etc/sane.d/dll.conf;if [ $$? -eq 0 ];then sed -i -e s/^#hpaio/hpaio/ /etc/sane.d/dll.conf;else grep -q ^hpaio /etc/sane.d/dll.conf;if [ $$? -ne 0 ];then echo hpaio >>/etc/sane.d/dll.conf;fi;fi'"
++
++# The following rule will disable USB autosuspend for the device
++ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
+ 
+ LABEL="hpmud_rules_end"
+--- data/rules/56-hpmud_support.rules.orig	2011-12-09 12:19:54.000000000 +0100
++++ data/rules/56-hpmud_support.rules	2012-01-12 16:24:00.000000000 +0100
+@@ -1,15 +1,16 @@
+ # HPLIP udev rules file. Notify console user if plugin support is required for this device.
+ 
+-ACTION!="add", GOTO="hpmud_rules_end"
+-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="pid_test"
+-SUBSYSTEM!="usb_device", GOTO="hpmud_rules_end"
+-
+-LABEL="pid_test"
++ACTION!="add", GOTO="hpmud_support_rules_end"
++SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="hpmud_support_pid_test"
++SUBSYSTEM!="usb_device", GOTO="hpmud_support_rules_end"
++ 
++LABEL="hpmud_support_pid_test"
+ 
+ # Check for LaserJet products (0x03f0xx17).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??17", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??17", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
+ # Check for LaserJet products (0x03f0xx2a).
+-ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??2a", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
++ATTR{idVendor}=="03f0", ATTR{idProduct}=="??2a", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
+ ENV{hp_test}=="yes", RUN+="/bin/sh -c '/usr/bin/hp-mkuri -c &'"
+ 
+-LABEL="hpmud_rules_end"
++LABEL="hpmud_support_rules_end"
++
+--- data/rules/86-hpmud_plugin.rules.orig	2011-12-09 12:19:54.000000000 +0100
++++ data/rules/86-hpmud_plugin.rules	2012-01-12 17:07:28.000000000 +0100
+@@ -1,9 +1,9 @@
+ # Load hp firmware for this printer.
+ 
+-ACTION!="add", GOTO="hpmud_rules_end"
++ACTION!="add", GOTO="hpmud_plugin_rules_end"
+ 
+ # hp_Marvel_Device (These printer requires the plugin files. installling when device is detected)
+-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??17", PROGRAM="/bin/sh -c 'logger -p user.info loading hp_printer_device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/hp-check-plugin -m &'"
+-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??2a", PROGRAM="/bin/sh -c 'logger -p user.info loading hp_printer_device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/hp-check-plugin -m &'"
++SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="03f0", ATTR{idProduct}=="??17", PROGRAM="/bin/sh -c 'logger -p user.info loading hp_printer_device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/hp-check-plugin -m &'"
++SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="03f0", ATTR{idProduct}=="??2a", PROGRAM="/bin/sh -c 'logger -p user.info loading hp_printer_device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/hp-check-plugin -m &'"
+ 
+-LABEL="hpmud_rules_end"
++LABEL="hpmud_plugin_rules_end"
diff --git a/packaging/fix-uninitialized-variables.diff b/packaging/fix-uninitialized-variables.diff
new file mode 100644
index 0000000..c84eee3
--- /dev/null
+++ b/packaging/fix-uninitialized-variables.diff
@@ -0,0 +1,11 @@
+--- ip/xmatrix.c.orig	2004-02-18 23:43:44.000000000 +0100
++++ ip/xmatrix.c	2005-05-17 13:48:17.000000000 +0200
+@@ -380,7 +380,7 @@
+ 
+         while (pwOut < (WORD*)pOutAfter)
+         {
+-            int prod0, prod1, prod2;
++            int prod0 = 0, prod1 = 0, prod2 = 0;
+ 
+             /* The fixed-point calculations below are as follows:
+              *     17.15 = input pixel
diff --git a/packaging/hp-systray.wrapper b/packaging/hp-systray.wrapper
new file mode 100644
index 0000000..60053f1
--- /dev/null
+++ b/packaging/hp-systray.wrapper
@@ -0,0 +1,17 @@
+#! /bin/bash
+
+# Be polite and sleep a bit to let more important processes go ahead
+# (in particular after booting let the cupsd finish its startup):
+sleep 10
+# Run hp-systray only if an appropriate local print queue exists
+# (i.e. on localhost a queue with a "hp:/..." DeviceURI)
+# see https://bugzilla.novell.com/show_bug.cgi?id=649280
+# otherwise and in case of any error do an unnoticeable exit:
+set -o pipefail
+lpstat -h localhost -v | grep -q ': hp:/' || exit 0
+# Replace this wrapper with the actual command
+# so that it exits with the exit code of the command
+# and that the command gets any signals directly,
+# see https://bugzilla.novell.com/show_bug.cgi?id=499735
+exec hp-systray
+
diff --git a/packaging/hpijs.1.gz b/packaging/hpijs.1.gz
new file mode 100644
index 0000000..c810dff
--- /dev/null
+++ b/packaging/hpijs.1.gz
diff --git a/packaging/hplip-3.9.8-CVE-2010-4267.patch b/packaging/hplip-3.9.8-CVE-2010-4267.patch
new file mode 100644
index 0000000..f146ce8
--- /dev/null
+++ b/packaging/hplip-3.9.8-CVE-2010-4267.patch
@@ -0,0 +1,11 @@
+--- io/hpmud/pml.c.orig	2009-08-04 23:37:25.000000000 +0200
++++ io/hpmud/pml.c	2010-12-17 13:09:28.000000000 +0100
+@@ -504,6 +504,8 @@ enum HPMUD_RESULT hpmud_get_pml(HPMUD_DE
+       p += 2;                               /* eat type and length */
+    }
+    
++   if (dLen > buf_size)
++      dLen = buf_size;
+    memcpy(buf, p, dLen);
+    *bytes_read = dLen; 
+    *type = dt;
diff --git a/packaging/hplip.desktop b/packaging/hplip.desktop
new file mode 100644
index 0000000..e1475b5
--- /dev/null
+++ b/packaging/hplip.desktop
@@ -0,0 +1,6 @@
+[Desktop Entry]
+Type=Application
+Name=hp-toolbox
+GenericName=HP Device Manager
+Exec=hp-toolbox
+Icon=HPmenu
diff --git a/packaging/hplip.spec b/packaging/hplip.spec
new file mode 100644
index 0000000..eac46fa
--- /dev/null
+++ b/packaging/hplip.spec
@@ -0,0 +1,1591 @@
+#
+# spec file for package hplip
+#
+# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via http://bugs.opensuse.org/
+#
+
+%define _unpackaged_files_terminate_build 0
+
+Name:           hplip
+Summary:        HP's Printing, Scanning, and Faxing Software
+License:        BSD-3-Clause ; GPL-2.0+ ; MIT
+Group:          Hardware/Printing
+# HPLIP has reached 1.0 status. With this release a date encoded revision number is used:
+# x.y.m : x = major release number, y = year (eg: 6 = 2006), m = month (eg: 6a = second release in June)
+# Official releases have a 3 digit number and release candidates have a 4 digit number: x.y.m.rc
+Version:        3.12.4
+Release:        12
+Url:            http://hplipopensource.com
+# Source0...Source9 is for sources from HP:
+# URL for Source0: http://prdownloads.sourceforge.net/hplip/hplip-3.12.4.tar.gz
+# URL to verify Source0: http://prdownloads.sourceforge.net/hplip/hplip-3.12.4.tar.gz.asc
+# How to verify Source0 see: http://hplipopensource.com/node/327
+# For example: /usr/bin/gpg --keyserver pgp.mit.edu --recv-keys 0xA59047B9
+#              /usr/bin/gpg --verify hplip-3.12.4.tar.gz.asc hplip-3.12.4.tar.gz
+# must result: Good signature from "HPLIP (HP Linux Imaging and Printing) <hplip@hp.com>"
+Source0:        hplip-%{version}.tar.gz
+BuildRoot:  %{_tmppath}/%{name}-%{version}-build
+
+# BuildRequires foomatic-filters to avoid /usr/lib/rpm/brp-symlink ERROR:
+# link target doesn't exist (neither in build root nor in installed system):
+# /usr/lib/cups/filter/foomatic-rip-hplip -> /usr/bin/foomatic-rip
+Requires:  cups
+BuildRequires:  cups-devel
+#BuildRequires:  dbus-1-devel
+#BuildRequires:  fdupes
+#BuildRequires:  foomatic-filters
+#BuildRequires:  hicolor-icon-theme
+#BuildRequires:  libdrm-devel
+#BuildRequires:  libgphoto2-devel
+BuildRequires:  pkgconfig(turbojpeg)
+#BuildRequires:  libqt4-devel
+BuildRequires:  libtool
+BuildRequires:  pkgconfig(libusb)
+#BuildRequires:  net-snmp-devel
+BuildRequires:  pkgconfig
+# All printer driver packages should have "BuildRequires: python-cups"
+# because python-cups installs special rpm macros that adds Provides tags
+# for the printer drivers supported by the package,
+# see https://bugzilla.novell.com/show_bug.cgi?id=735865
+#BuildRequires:  python-cups
+BuildRequires:  python-devel
+#BuildRequires:  python-openssl
+#BuildRequires:  python-qt4
+#BuildRequires:  python-xml
+#BuildRequires:  readline-devel
+#%if 0%{?suse_version} > 1130
+#BuildRequires:  sane-backends-devel
+#%else
+#BuildRequires:  sane-backends
+#%endif
+#BuildRequires:  update-desktop-files
+# Patch0...Patch9 is for patches from HP:
+# Patch10...Patch99 is for Suse patches for the sources from HP:
+# Patch10 fixes "... is used uninitialized ..." warnings:
+Patch10:        fix-uninitialized-variables.diff
+# Patch11 fix_gcc44_glib.diff is obsolete since version 3.9.6b because it is fixed in the source.
+# Patch12 hplip-3.9.8-CVE-2010-4267.patch fixes a remote buffer overflow in hpmud/pml.c:
+Patch12:        hplip-3.9.8-CVE-2010-4267.patch
+# Source100... is for special Suse sources:
+# Source100 is the primary source for the suse_update_desktop_file stuff.
+# It is found automatically in $RPM_SOURCE_DIR by 'suse_update_desktop_file -i hplip':
+Source100:      hplip.desktop
+# Source101 hp-toolbox.wrapper was a wrapper for hp-toolbox which is no longer needed
+# see https://bugzilla.novell.com/show_bug.cgi?id=755820
+# Source102 is a small man page for /usr/bin/hpijs:
+Source102:      hpijs.1.gz
+# Source103 was the init script for hpssd which is obsolete since version 2.8.4.
+# Source104 was a script which outputs a global HAL fdi file which is obsolete
+# since openSUSE 11.2 where HAL is no longer used to manage ACLs,
+# see https://bugzilla.novell.com/show_bug.cgi?id=542473#c13
+# Source105 hplip.SuSEfirewall2 provides support
+# to open UDP ports 5353(mdns) and 427(svrloc) for mDNS support
+# according to the init-suse-firewall in the tar ball
+# (compare also Novell/Suse Bugzilla bnc#498429)
+# hplip.SuSEfirewall2 is no longer provided
+# see https://bugzilla.novell.com/show_bug.cgi?id=757354#c10
+# Source106 is a wrapper for hp-systray which tests via "lpstat"
+# whether or not a 'hp:/...' print queue exists and exits otherwise,
+# see https://bugzilla.novell.com/show_bug.cgi?id=649280
+# hp-systray.wrapper is called via /etc/xdg/autostart/hplip-systray.desktop
+# which is changed accordingly in the install section.
+Source106:      hp-systray.wrapper
+# Patch100... is for special Suse patches:
+# Patch101 changes the udev rules files 55-hpmud.rules and 56-hpmud_support.rules:
+Patch101:       change-udev-rules.diff
+# Patch102 deactivates the "chgrp lp -R /var/log/hp" in Makefile.am
+# because during install this results "Operation not permitted"
+# this is done in the files section via attr(0774,root,lp)
+# where mode 0774 matches to what is set in Makefile.am:
+Patch102:       no-chgrp_lp_hplip_Logdir.diff
+
+# Tizen patch
+# Tizen do not use dbus communication in hpcups filter
+Patch103:		tizen_disable_dbus_hpcups.patch
+# Added SIGPIPE, IGN to avoide hpcups crash
+Patch104:		tizen_add_sigpipe_ign.patch
+Patch105:		tizen_fix_image_align.patch
+Patch106:		tizen_fix_debug_log.patch
+
+#PreReq:         coreutils
+#PreReq:         /bin/grep
+#PreReq:         /bin/sed
+#PreReq:         /usr/bin/find
+# Require the exact matching version-release of the hpijs sub-package to make sure
+# to have the exact matching version of libhpip and libhpmud installed.
+# The exact matching version-release of the sub-package is available on the same
+# repository where the main-package is (compare the "Recommends: hplip" entry below).
+#Requires:       %{name}-hpijs = %{version}-%{release}
+# Same rationale for the sane subpackage.
+#Requires:       %{name}-sane = %{version}-%{release}
+# Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451)
+# plus a leftover in CVE-2004-0801 (bnc#59233)
+# foomatic-rip-hplip is no longer installed and foomatic-rip
+# from the foomatic-filters RPM is used instead.
+# The RPM requirement for foomatic-filters should actually be
+# in the hplip-hpijs sub-package but this would bloat a minimalist system
+# (see the comment for the hplip-hpijs sub-package below).
+# Therefore the hplip main package which is intended
+# to get "all the HPLIP stuff" installed has the RPM requirement:
+#Requires:       foomatic-filters
+# foomatic-filters does not require Ghostscript because depending on the PPD
+# (e.g. some PPDs for PostScript printers in OpenPrintingPPDs-postscript)
+# foomatic-rip can also be used without Ghostscript but for the drivers
+# HPIJS and HPCUPS Ghostscript is needed.
+# The RPM requirement for ghostscript should actually be in the
+# hplip-hpijs sub-package but this would bloat a minimalist system
+# (see the comment for the hplip-hpijs sub-package below).
+# Therefore the hplip main package which is intended
+# to get "all the HPLIP stuff" installed has the RPM requirement:
+#Requires:       ghostscript
+# Require special Python stuff (which pulls in Python base stuff).
+# At least since openSUSE 11.1 and SLE11 pyxml is no longer required
+# (pyxml was required in particular for openSUSE 10.3 and SLE10,
+#  see https://answers.launchpad.net/hplip/+question/25696)
+# but meanwhile python-xml alone is sufficient for "import xml.parsers.expat"
+# see https://bugzilla.novell.com/show_bug.cgi?id=656779#c3
+#Requires:       python-xml
+# Since version 3.9.2 by default only Qt4 is used:
+#Requires:       python-qt4
+# Since version 2.8.4 all interprocess communication uses dbus.
+# Therefore python-dbus version 0.80 or greater is required (which pulls in dbus base stuff).
+# The dbus stuff in HPLIP requires the Python module gobject
+# but there is no automated RPM requirement for python-gobject2,
+# see https://answers.launchpad.net/hplip/+question/30741
+#Requires:       dbus-1-python >= 0.80
+#Requires:       python-gobject2
+# Either the hplip17 packages or the hplip packages can be installed,
+# see https://bugzilla.novell.com/show_bug.cgi?id=251830#c20
+# for the full story why there is this unversioned Obsoletes:
+Obsoletes:      hplip17
+# Obsolete the hplip3 copy that was introduced for older SLED11-GA HP preloads:
+Provides:       hplip3 = 3.9.5
+Obsoletes:      hplip3 < 3.9.5
+# Skip testing devel dependencies required by libtool .la files by the following comment:
+# skip-check-libtool-deps
+
+%description
+The Hewlett-Packard Linux Imaging and Printing project (HPLIP) provides
+a unified single and multifunction connectivity solution for HP
+printers and scanners (in particular, HP all-in-one devices).
+
+HPLIP provides unified connectivity for printing, scanning, sending
+faxes, photo card access, and device management and is designed to work
+with CUPS.
+
+It includes the Ghostscript printer driver HPIJS for HP printers and a
+special "hp" CUPS back-end that provides bidirectional communication
+with the device (required for HP printer device management).
+
+It also includes the SANE scanner driver "hpaio" for HP all-in-one
+devices. Basic PC send fax functionality is supported on a number of
+devices.
+
+The special "hpfax" CUPS back-end is required to send faxes. Direct
+uploading (i.e. without print and scan) of received faxes from the
+device to the PC is not supported.
+
+The "hp-toolbox" program is provided for device management.
+
+The "hp-sendfax" program must be used to send faxes.
+
+The "hp-setup" program can be used to set up HP all-in-one devices.
+
+The HPLIP project is open source software and uses GPL-compatible
+licenses. For more information, see:
+
+http://hplipopensource.com
+
+/usr/share/doc/packages/hplip/index.html
+
+
+#%package hpijs
+#Summary:        Only plain printing with HPLIP printer drivers
+#Group:          Hardware/Printing
+# Since Nov 14 2007 ghostscript-library does no longer require /usr/bin/hpijs
+# but only "Suggests hplip-hpijs" (see Novell/Suse Bugzilla bnc#341564).
+# Have the matching "reverse suggests" = "Enhances" here
+# to document the ghostscript <-> hplip-hpijs relationship:
+#Enhances:       ghostscript
+# On a minimalist system only hplip-hpijs may be installed
+# or on a minimalist package repository (e.g. on the openSUSE CDs)
+# only hplip-hpijs may be available (even when a usual system is installed).
+# When only hplip-hpijs is there, it should tell the dependency resolver
+# that for usual functionality, hplip should be installed too (if possible).
+# Unfortunately the installer ignores suggested packages silently
+# but on the other hand I cannot use "Recommends hplip" here
+# because the installer installs recommended packages silently
+# which would bloat a minimal selection (when hplip is available to be installed)
+# because the minimal selection contains hplip-hpijs which recommends hplip
+# so that the installer installs hplip and all what this requires silently
+# see https://bugzilla.novell.com/show_bug.cgi?id=546893
+# Require only the matching version of the hplip main-package
+# (compare the "Requires: hplip-hpijs" entry above) but do not depend
+# on the exact matching release because the exact matching release
+# may be not available to be installed (e.g. when hplip-hpijs-1.2.3-4.5 is
+# installed from the openSUSE CDs but on our official online repository
+# only hplip-1.2.3-6.7 is available which should usually also work):
+#Suggests:       %{name} = %{version}
+# hpijs-standalone was a stand-alone minimalist package
+# which is no longer provided since a long time.
+# hplip-hpijs and hpijs-standalone both contain /usr/bin/hpijs
+# so that both packages have a RPM conflict which should
+# be solved by a silent replacement of the old hpijs-standalone.
+# This Obsoletes is intentionally unversioned because
+# hplip-hpijs should replace any version of hpijs-standalone.
+#Obsoletes:      hpijs-standalone
+# Either the hplip17 packages or the hplip packages can be installed,
+# see https://bugzilla.novell.com/show_bug.cgi?id=251830#c20
+# for the full story why there is this unversioned Obsoletes:
+#Obsoletes:      hplip17-hpijs
+# Obsolete the hplip3 copy that was introduced for older SLED11-GA HP preloads:
+#Provides:       hplip3-hpijs = 3.9.5
+#Obsoletes:      hplip3-hpijs < 3.9.5
+# PackMan provides HPLIP in the packages hplip and hplip-hpcups.
+# HPLIP does not work if the openSUSE packages hplip and hplip-hpijs
+# are installed together with a leftover PackMan package hplip-hpcups
+# see https://bugzilla.novell.com/show_bug.cgi?id=515005#c17
+# This Obsoletes is intentionally unversioned because
+# the openSUSE package hplip-hpijs must replace
+# any version of PackMan's hplip-hpcups package.
+#Obsoletes:      hplip-hpcups
+
+#%description hpijs
+#HPIJS is HPLIP's Ghostscript printer driver for HP printers.
+#HPCUPS is HPLIP's native CUPS printer driver for HP printers.
+
+#This sub-package includes only what is needed for plain printing
+#with the printer drivers in HPLIP for standard HP printers.
+
+#It does neither provide device status information,
+#nor support for scanning, nor support for faxing,
+#nor support for memory card (mass storage) access,
+#nor support for non-standard devices e.g. no support
+#for devices which require an additional plugin from HP.
+
+#This sub-package includes in particular:
+
+#The hpijs binary and the libraries libhpip and libhpmud
+#which are needed to run it.
+
+#The HPCUPS driver (/usr/lib[64]/cups/filter/hpcups).
+
+#The CUPS backend "hp".
+
+#All HPLIP PPD files (also for HP PostScript printers).
+
+#For the full-featured HPLIP printing and scanning solution,
+#the main-package package hplip must be installed.
+
+#For full documentation and license see the main-package hplip.
+
+
+#%package sane
+#Summary:        Only plain scanning with HPLIP scan drivers
+#Group:          Hardware/Scanner
+# Require the exact matching version-release of the hpijs sub-package to make sure
+# to have the exact matching version of libhpip and libhpmud installed.
+# A wrong library version may let libsane-hpaio crash (e.g. segfault)
+# which lets the whole scanning stack frontend<->libsane-dll<->libsane-backend crash
+# also for any other backend when the hpaio backend is enabled (e.g. "scanimage -L"):
+#Requires:       %{name}-hpijs = %{version}-%{release}
+# See comment in hpijs sub-package for same Suggests:
+#Suggests:       %{name} = %{version}
+# Automatically install this package if hpijs sub-package and sane-backends are
+# both installed:
+#Supplements:    packageand(%{name}-hpijs:sane-backends)
+#Enhances:       sane-backends
+
+#%description sane
+#This sub-package includes only what is needed for plain scanning
+#with the scan drivers in HPLIP for standard HP all-in-one printers.
+
+%prep
+# Be quiet when unpacking:
+%setup -q
+# Patch10 fix-uninitialized-variables.diff
+# fixes "... is used uninitialized ..." warnings:
+%patch10
+# Patch12 hplip-3.9.8-CVE-2010-4267.patch
+# fixes a remote buffer overflow in hpmud/pml.c:
+%patch12
+# Patch101 change-udev-rules.diff
+# changes the udev rules files 55-hpmud.rules and 56-hpmud_support.rules:
+%patch101
+# Patch102 deactivates the "chgrp lp -R /var/log/hp" in Makefile.am
+# because during install this results "Operation not permitted"
+# this is done in the files section via attr(0774,root,lp)
+# where mode 0774 matches to what is set in Makefile.am:
+%patch102
+%patch103
+%patch104
+%patch105
+%patch106
+
+%build
+# If AUTOMAKE='automake --foreign' is not set, autoreconf (in fact automake)
+# complains about missing files like NEWS, README, AUTHORS, ChangeLog
+# in each directory where a Makefile.am exists:
+AUTOMAKE='automake --foreign' autoreconf --force --install
+# Set our preferred architecture-specific flags for the compiler and linker:
+export CFLAGS="$RPM_OPT_FLAGS"
+export CXXFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing"
+# Static "hpijs" PPD files via enable-foomatic-ppd-install
+# require foomatic-rip-hplip via their cupsFilter entries
+# so that enable-foomatic-rip-hplip-install is also needed.
+# Since version 3.9.6 the default printer driver install changed from hpijs to hpcups.
+# According to http://hplipopensource.com/hplip-web/release_notes.html
+# all drv installs require CUPSDDK 1.2.3 or higher.
+# Otherwise a static PPD install must be performed.
+# Furthermore dynamic PPDs will be deprecated in the future in CUPS,
+# see http://www.cups.org/str.php?L3772
+# For hpcups static PPD install one needs:
+# --enable-hpcups-install enable hpcups install (default=yes)
+# --disable-cups-drv-install enable cups dynamic ppd install (default=yes)
+# --enable-cups-ppd-install enable cups static ppd install (default=no)
+# For both hpcups and hpijs install with static PPDs one needs additionally:
+# --enable-hpijs-install enable hpijs install (default=no)
+# --disable-foomatic-drv-install enable foomatic dynamic ppd install (default=no), uses drvdir and hpppddir
+# --enable-foomatic-ppd-install enable foomatic static ppd install (default=no), uses hpppddir
+# --enable-foomatic-rip-hplip-install enable foomatic-rip-hplip install (default=no), uses cupsfilterdir
+# Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451) plus a leftover in CVE-2004-0801 (bnc#59233)
+# which are fixed up to openSUSE 11.4 with patches, after openSUSE 11.4 (i.e. since openSUSE 12.1)
+# foomatic-rip-hplip is no longer installed and foomatic-rip from foomatic-filters is used instead so that 
+# --disable-foomatic-rip-hplip-install is explicitly set and as a consequence the "cupsFilter" entries
+# in the static PPDs are changed in the install section to use foomatic-rip.
+./configure --prefix=/usr \
+            --libdir=%{_libdir} \
+			--prefix=/usr \
+    	    --localstatedir=/var \
+	        --sysconfdir=/opt/etc \
+	        --mandir=\$${prefix}/share/man \
+        	--infodir=\$${prefix}/share/info \
+    	    --docdir=\$${prefix}/share/doc/hplip \
+	        --with-docdir=\$${prefix}/share/doc/hplip \
+            --disable-qt3 \
+            --disable-qt4 \
+            --disable-policykit \
+            --disable-doc-build \
+            --disable-network-build \
+            --disable-pp-build \
+            --disable-scan-build \
+            --disable-gui-build \
+            --disable-fax-build \
+            --disable-dbus-build \
+            --enable-hpcups-install \
+            --disable-cups-drv-install \
+            --disable-cups-ppd-install \
+            --disable-hpijs-install \
+            --disable-foomatic-drv-install \
+            --disable-foomatic-ppd-install \
+            --disable-foomatic-rip-hplip-install \
+            --with-hpppddir=%{_datadir}/cups/model/manufacturer-PPDs/%{name} \
+            --with-cupsbackenddir=/usr/lib/cups/backend \
+            --with-cupsfilterdir=/usr/lib/cups/filter
+#            --with-drvdir=/usr/lib/cups/driver \
+#            --with-mimedir=%{_sysconfdir}/cups \
+#            --with-docdir=%{_defaultdocdir}/%{name}
+make
+
+%install
+make install DESTDIR=%{buildroot}
+
+mkdir -p %{buildroot}/usr/share/license
+cp %{_builddir}/%{buildsubdir}/COPYING %{buildroot}/usr/share/license/%{name}
+
+# Remove the installed /etc/sane.d/dll.conf
+# because this is provided by the sane-backends package:
+#rm %{buildroot}%{_sysconfdir}/sane.d/dll.conf
+# Remove the installed HAL fdi file because HAL is no longer used (HAL is deprecated):
+#rm %{buildroot}%{_datadir}/hal/fdi/preprobe/10osvendor/20-hplip-devices.fdi
+# Remove the outdated "Check and add printer for Suse 10.3 distro" udev rule
+# and let the build fail if it does no longer match to notify about the change:
+#grep 'for Suse 10.3 distro' %{buildroot}%{_sysconfdir}/udev/rules.d/56-hpmud_add_printer.rules || exit 1
+#sed -i -e '/for Suse 10.3 distro/,+1 d' %{buildroot}%{_sysconfdir}/udev/rules.d/56-hpmud_add_printer.rules
+# Begin "General tests and adjustments for all PPDs" (see manufacturer-PPDs.spec):
+#pushd %{buildroot}%{_datadir}/cups/model/manufacturer-PPDs/%{name}
+# Do not pollute the build log file with zillions of meaningless messages:
+#set +x
+#gunzip *.ppd.gz
+# Make some general tests and adjustments for all PPDs:
+#echo "Making some general tests and adjustments for all PPDs:"
+# Add a line-feed to the end of all PPDs to fix those PPDs where it is missing.
+# See Novell/Suse Bugzilla bug #309832: Unix/Linux text files must end with a line-feed.
+# Otherwise reading the last line results EOF and then some programs may ignore the last line.
+#echo "Adding a line-feed to the end of all PPDs to fix those PPDs where it is missing..."
+#for p in *.ppd
+#do echo -en '\n' >>$p
+#done
+# Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451) plus a leftover in CVE-2004-0801 (bnc#59233)
+# foomatic-rip-hplip is no longer installed and foomatic-rip from foomatic-filters is used instead so that 
+# the "cupsFilter" entries in the static PPDs must be changed accordingly:
+#echo "Replacing insecure foomatic-rip-hplip with foomatic-rip everywhere in in the PPDs..."
+#for p in *.ppd
+#do sed -i -e 's/foomatic-rip-hplip/foomatic-rip/' $p
+#done
+# Final test by cupstestppd:
+# To save disk space gzip the files (gzipped PPDs can also be used by CUPS).
+# Future goal: Only have files which don't FAIL for cupstestppd.
+# Ignore FAILs because of errors in UIConstraints and/or NonUIConstraints
+# which are detected since cupstestppd in CUPS > 1.2.7 (i.e. in openSUSE 10.3).
+# See Novell/Suse Bugzilla bug #309822: When this bug is fixed, cupstestppd would
+# no longer result zero exit code.
+# In the long run the PPDs should be fixed but as far as we know there have been
+# no problems because of such UIConstraints errors so that it should be o.k.
+# let those PPDs pass even if they are not strictly compliant.
+# Ignore FAILs because of missing cupsFilter programs because
+# in the package build environment the usual HPLIP filters
+# like "hpcups" and "hpcupsfax" are
+# installed at an unusual place (in the BuildRoot directory).
+# For now keep all PPDs even if cupstestppd FAILs.
+# Reason:
+# With each CUPS version upgrade cupstestppd finds more and more errors
+# so that more and more PPDs would be no longer included in the RPM
+# which have been included before which results a regression.
+# As far as we know there have been no problems at all because of
+# not strictly compliant PPDs in HPLIP so that it is much better
+# to provide all HPLIP PPDs so that the matching printers can be used
+# than to be rigorous regarding enforcing compliance to the PPD specification:
+#echo "Final testing by cupstestppd..."
+#for p in *.ppd
+#do grep -E -v '^\*UIConstraints:|^\*NonUIConstraints:|^\*cupsFilter:' $p | cupstestppd - || true
+#   gzip $p
+#done
+#echo "End of general tests and adjustments for all PPDs."
+# Switch back to the usual build log messages:
+#set -x
+# End of "General tests and adjustments for all PPDs":
+#popd
+# Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451)
+# plus a leftover in CVE-2004-0801 (bnc#59233)
+# foomatic-rip-hplip is no longer installed and foomatic-rip
+# from the foomatic-filters RPM must be used instead.
+# To be backward compatible with PPDs in /etc/cups/ppd/
+# for existing print queues a compatibility link
+# /usr/lib/cups/filter/foomatic-rip-hplip
+# which points to foomatic-rip is installed:
+#ln -s ../../../bin/foomatic-rip %{buildroot}/usr/lib/cups/filter/foomatic-rip-hplip
+# Begin "Desktop menue entry stuff":
+# Install /usr/share/hplip/data/images/64x64/hp_logo.png as desktop icon file
+# because it is used in the hplip.desktop.in and hplip-systray.desktop.in sources:
+#install -D -m 644 %{buildroot}%{_datadir}/hplip/data/images/32x32/hp_logo.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/HPmenu.png
+#install -D -m 644 %{buildroot}%{_datadir}/hplip/data/images/64x64/hp_logo.png %%{buildroot}%{_datadir}/icons/hicolor/64x64/apps/HPmenu.png
+#install -D -m 644 %{buildroot}%{_datadir}/hplip/data/images/128x128/hp_logo.png %{buildroot}%{_datadir}/icons/hicolor/128x128/apps/HPmenu.png
+#install -D -m 644 %{buildroot}%{_datadir}/hplip/data/images/256x256/hp_logo.png %{buildroot}%{_datadir}/icons/hicolor/256x256/apps/HPmenu.png
+# Set up and install the desktop menue entry stuff using "Categories=System;Monitor;"
+# and remove HP's hplip.desktop and hplip-systray.desktop files before because we use Source100:
+# (additionally there is/was a typo in HP's install because of the trailing blank at 'applications ')
+#rm %{buildroot}%{_datadir}/applications/hplip*.desktop
+#%suse_update_desktop_file -i %{name} System HardwareSettings Printing
+# Let suse_update_desktop_file add X-SuSE-translate key to /etc/xdg/autostart/hplip-systray.desktop
+# so that we can update its translations with translation-only packages.
+#%suse_update_desktop_file %{buildroot}/etc/xdg/autostart/hplip-systray.desktop
+# End of "Desktop menue entry stuff".
+# Install the man page for /usr/bin/hpijs:
+#install -d %{buildroot}%{_mandir}/man1
+#install -m 644 %{SOURCE102} %{buildroot}%{_mandir}/man1/
+# Begin "Desktop autostart notification tray stuff":
+# Install the wrapper for hp-systray:
+#install -m 755 %{SOURCE106} %{buildroot}%{_bindir}/hp-systray.wrapper
+# Change /etc/xdg/autostart/hplip-systray.desktop to call hp-systray.wrapper:
+#sed -i -e '/^Exec=hp-systray$/s/hp-systray/hp-systray.wrapper/;' %{buildroot}/etc/xdg/autostart/hplip-systray.desktop
+# End of "Desktop autostart notification tray stuff".
+# Find duplicate files:
+#%fdupes -s %{buildroot}
+
+%post
+#%if 0%{?suse_version} > 1130
+#%icon_theme_cache_post
+#%else
+#gtk-update-icon-cache %{_datadir}/icons/hicolor || true
+#%endif
+/sbin/ldconfig
+#exit 0
+
+#%triggerin -- sane-backends
+# As hplip can be used for plain printers it cannot "PreReq sane-backends".
+# Therefore if sane-backends is installed it may be installed or updated after hplip.
+# In this case trigger to add the SANE backend "hpaio" to /etc/sane.d/dll.conf if it is not there.
+# To be safe there is a test that /etc/sane.d/dll.conf is writable.
+#if [ -w /etc/sane.d/dll.conf ]
+#then if ! grep -q 'hpaio' /etc/sane.d/dll.conf
+#     then echo -e '# The hpaio backend is provided by the hplip package:\n#hpaio' >>/etc/sane.d/dll.conf
+#     fi
+#fi
+#exit 0
+
+%preun
+# If the package was removed and if it was updated
+# remove all byte-compiled Python .pyc (and perhaps .pyo) files
+# which are created at run-time by Python in /usr/share/hplip/.
+# Use a generic method via "find" so that it works in any case
+# without the need to maintain a long list of individual files.
+# Even if this may accidentally remove "foreign" .pyc/.pyo files
+# which do not originate from matching .py files from this package
+# (e.g. third-party stuff in /usr/share/hplip/), there is no damage
+# because Python could re-create them or work only with .py files.
+#find /usr/share/hplip/ -name '*.py[co]' -delete
+#exit 0
+
+%postun
+#%if 0%{?suse_version} > 1130
+#%icon_theme_cache_postun
+#%else
+#gtk-update-icon-cache %{_datadir}/icons/hicolor || true
+#%endif
+/sbin/ldconfig
+# If the package was removed (but not if it was updated)
+# then remove the hpaio lines in /etc/sane.d/dll.conf.
+# Don't remove them when the hplip package was automatically
+# replaced by the hplip17 package (via RPM obsoletes) or vice versa.
+# Because postun of the old package runs last (after triggerin -- sane-backends)
+# it is done via a special "ls" test if any libsane-hpaio.so exists
+# (e.g. there could be only 32-bit installed on 64-bit hardware).
+# If the "ls" test does not fail, some kind of HPLIP is installed.
+# The package sane-backends may not be installed (see triggerin)
+# and therefore the test that /etc/sane.d/dll.conf is writable.
+# The "exit 0" is necessary, otherwise the postun script
+# would exit with non-zero exit-code if the package was not removed.
+#if [ "$1" = "0" ]
+#then if ! ls /usr/lib*/sane/libsane-hpaio.so* &>/dev/null
+#     then [ -w /etc/sane.d/dll.conf ] && sed -i -e '/hpaio/d' /etc/sane.d/dll.conf
+#     fi
+#fi
+#exit 0
+
+#%post hpijs
+#/sbin/ldconfig
+#exit 0
+
+#%postun hpijs
+#/sbin/ldconfig
+#exit 0
+
+%files
+%manifest hplip.manifest
+%defattr(-, root, root)
+/usr/share/license/%{name}
+#%config %{_sysconfdir}/xdg/autostart/hplip-systray.desktop
+#%dir %{_sysconfdir}/udev
+#%dir %{_sysconfdir}/udev/rules.d
+#%config %{_sysconfdir}/udev/rules.d/55-hpmud.rules
+#%config %{_sysconfdir}/udev/rules.d/56-hpmud_add_printer.rules
+#%config %{_sysconfdir}/udev/rules.d/56-hpmud_support.rules
+#%config %{_sysconfdir}/udev/rules.d/86-hpmud_plugin.rules
+#%{_bindir}/hp-align
+#%{_bindir}/hp-check
+#%{_bindir}/hp-check-plugin
+#%{_bindir}/hp-clean
+#%{_bindir}/hp-colorcal
+#%{_bindir}/hp-config_usb_printer
+#%{_bindir}/hp-devicesettings
+#%{_bindir}/hp-diagnose_plugin
+#%{_bindir}/hp-diagnose_queues
+#%{_bindir}/hp-fab
+#%{_bindir}/hp-faxsetup
+#%{_bindir}/hp-firmware
+#%{_bindir}/hp-info
+#%{_bindir}/hp-levels
+#%{_bindir}/hp-linefeedcal
+#%{_bindir}/hp-makecopies
+#%{_bindir}/hp-makeuri
+#%{_bindir}/hp-mkuri
+#%{_bindir}/hp-pkservice
+#%{_bindir}/hp-plugin
+#%{_bindir}/hp-pqdiag
+#%{_bindir}/hp-print
+#%{_bindir}/hp-printsettings
+#%{_bindir}/hp-probe
+#%{_bindir}/hp-query
+#%{_bindir}/hp-scan
+#%{_bindir}/hp-sendfax
+#%{_bindir}/hp-setup
+#%{_bindir}/hp-systray
+#%{_bindir}/hp-testpage
+#%{_bindir}/hp-timedate
+#%{_bindir}/hp-toolbox
+#%{_bindir}/hp-uninstall
+#%{_bindir}/hp-unload
+#%{_bindir}/hp-upgrade
+#%{_bindir}/hp-wificonfig
+#%{_libdir}/python%{py_ver}/site-packages/cupsext.*
+#%{_libdir}/python%{py_ver}/site-packages/hpmudext.*
+#%{_libdir}/python%{py_ver}/site-packages/pcardext.*
+#%{_libdir}/python%{py_ver}/site-packages/scanext.*
+#%dir /usr/lib/cups
+#%dir /usr/lib/cups/backend
+#/usr/lib/cups/backend/hpfax
+%dir /usr/lib/cups/filter
+/usr/lib/cups/filter/hpcups
+#/usr/lib/cups/filter/hpcupsfax
+#%doc %{_defaultdocdir}/%{name}/
+#%{_datadir}/icons/hicolor/*/apps/HPmenu.png
+#%{_datadir}/applications/%{name}.desktop
+#%{_bindir}/hp-systray.wrapper
+#%{_datadir}/hplip/
+#%exclude %{_datadir}/hplip/data/models/models.dat
+
+#%files hpijs
+#%defattr(-, root, root)
+#%config %{_sysconfdir}/hp/
+#%config %{_sysconfdir}/cups/pstotiff.convs
+#%config %{_sysconfdir}/cups/pstotiff.types
+#%{_bindir}/hpijs
+#%doc %{_mandir}/man1/hpijs.1.gz
+#%{_libdir}/libhpip.*
+#%{_libdir}/libhpmud.*
+#%dir /usr/lib/cups
+#%dir /usr/lib/cups/backend
+#/usr/lib/cups/backend/hp
+#%dir /usr/lib/cups/filter
+#/usr/lib/cups/filter/foomatic-rip-hplip
+#/usr/lib/cups/filter/hpcac
+#/usr/lib/cups/filter/hplipjs
+#/usr/lib/cups/filter/hpps
+#/usr/lib/cups/filter/pstotiff
+#%dir %{_datadir}/cups
+#%dir %{_datadir}/cups/model
+#%dir %{_datadir}/cups/model/manufacturer-PPDs
+#%{_datadir}/cups/model/manufacturer-PPDs/%{name}/
+#%{_datadir}/%{name}/data/models/models.dat
+#%dir %attr(0774,root,lp) %{_var}/log/hp
+
+#%files sane
+#%defattr(-, root, root)
+#%dir %{_libdir}/sane
+#%{_libdir}/sane/libsane-hpaio.*
+
+%changelog
+* Tue Apr 24 2012 jsmeix@suse.de
+-  hplip.SuSEfirewall2 is no longer provided
+  (see SUSE Bugzilla bnc#757354 comment #10).
+* Thu Apr 12 2012 jsmeix@suse.de
+- Upgraded to version 3.12.4:
+  Uninstall Support: User can uninstall complete HPLIP package
+  by running "hp-uninstall" command.
+  Upgrade Support: Settings can be configured using
+  "hp-systray -> settings -> Update settings" for notification
+  of newer version of HPLIP release. User can also upgrade to
+  latest version by running "hp-upgrade" command.
+  Queue Analyzer: Print/Fax queues can be analyzed by
+  running "hp-diagnose-queues" command or by clicking
+  on "Diagnose Queues" from toolbox.
+  Several more supported printers and all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Removed hp-toolbox.wrapper because the reason for it
+  is no longer valid (see SUSE Bugzilla bnc#755820).
+- Added "BuildRequires: python-cups" to get special
+  RPM Provides tags for the printers supported by
+  this package (see SUSE Bugzilla bnc#735865).
+* Wed Feb  8 2012 jsmeix@suse.de
+- Upgraded to version 3.12.2:
+  Fixed digital signature mismatch issue for plugin download.
+  Removed unsupported features (Water Mark overlay, Job Storage,
+  PIN 2 Print) from the PS PPDs.
+  Several more supported printers and all-in-one devices.
+  A few bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Thu Jan 12 2012 jsmeix@suse.de
+- Upgraded to version 3.11.12:
+  Auto-detection and installation of missing plug-ins.
+  Designed tool to detect the missing plugin files and intimate
+  user about it and giving the path forward to install it.
+  SYSFS is replaced by ATTRS in udev rules.
+  Uses D-Bus from separate threads without locking.
+  Several more supported printers and all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- change-udev-rules.diff changes ATTRS to ATTR (bnc#436085).
+- no-chgrp_lp_hplip_Logdir.diff deactivates
+  the "chgrp lp -R /var/log/hp" in Makefile.am because
+  during install this results "Operation not permitted".
+  This is done in the files section via attr(0774,root,lp)
+  where mode 0774 matches to what is set in Makefile.am.
+* Fri Oct 28 2011 badshah400@gmail.com
+- Install icons of various sizes in hicolor icon directory for
+  better appearance in gnome-shell (bnc#713902).
+- Add hicolor-icon-theme BuildRequires to own the hicolor icon
+  directory correctly and install icons in there
+- Use appropriate icon theme macros in post scripts
+- Modified hplip.desktop to use these hicolor icons
+- In hplip.desktop replace the category "Settings" by "System" to
+  make it appear under the correct group "System Tools" rather
+  than "Others" in desktop menus.
+* Sat Oct 15 2011 coolo@suse.com
+- add libtool as buildrequire to make the spec file more reliable
+* Thu Oct 13 2011 vuntz@opensuse.org
+- Split the sane driver in a hplip-sane subpackage, so that it's
+  not necessary to install the full hplip tools to use an
+  all-in-one HP printer. See bnc#723870.
+* Tue Oct  4 2011 jsmeix@suse.de
+- Upgraded to version 3.11.10:
+  Fixed insecure tmp file handling in hpcupsfax.cpp CVE-2011-2722
+  see https://bugs.launchpad.net/hplip/+bug/809904 (bnc#704608).
+  New tech classes for HP OfficeJet Pro 8100,
+  HP Deskjet 3070 B611 series and HP Photosmart 7510 e-All-in-One.
+  Added new subtech class for HP Photosmart 6510 e-All-in-one.
+  Modified the error message which was displayed in case
+  of missing .asc file for manual plug-in install.
+  Several more supported printers and all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Fri Aug 12 2011 jsmeix@suse.de
+- Upgraded to version 3.11.7:
+  A few more supported printers and all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Because foomatic-rip-hplip has CVE-2011-2697 (bnc#698451)
+  plus a leftover in CVE-2004-0801 (bnc#59233)
+  foomatic-rip-hplip is no longer installed and foomatic-rip
+  from the foomatic-filters RPM is used instead and the
+  "cupsFilter" entries in the PPDs are changed accordingly.
+  To be backward compatible with PPDs in /etc/cups/ppd/
+  for existing print queues a compatibility link
+  /usr/lib/cups/filter/foomatic-rip-hplip
+  which points to foomatic-rip is installed.
+- The DefaultPageSize in the PPDs is no longer set to A4
+  if A4 is an available PageSize choice but left "as is"
+  because the DefaultPageSize in the PPD templates in
+  /usr/share/cups/model/ does not matter because the cupsd
+  sets the DefaultPageSize for PPDs in /etc/cups/ppd/
+  by default according to the locale that the cupsd runs in or
+  according to a DefaultPaperSize entry in /etc/cups/cupsd.conf.
+- No longer "Correcting or removing non-working PPDs..."
+  because none of those cases which were fixed still exist
+  (i.e. all those cases are meanwhile fixed upstream).
+* Fri May 13 2011 jsmeix@suse.de
+- Upgraded to version 3.11.5:
+  Added LEDM ADF Scan support.
+  Added LEDM Wireless support.
+  Some more supported printers and all-in-one devices.
+  It may fix the inverted/wrong color problem in HPCUPS
+  (see Novell/openSUSE Bugzilla bnc #692905).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Tue Mar 29 2011 jsmeix@suse.de
+- Upgraded to version 3.11.3a:
+  Fixed hp-plugin plugin download error (no Suse bug), see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Fri Mar 18 2011 jsmeix@suse.de
+- Upgraded to version 3.11.3:
+  New device class StingrayOJ for HP OfficeJet 100 Mobile L411.
+  New filter hpps (HP PS filter for PostScript printers) currently
+  only used via hp-officejet_pro_8000_enterprise_a811a-ps.ppd.gz
+  Some more supported printers and all-in-one devices.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Tue Feb  1 2011 jsmeix@suse.de
+- Updated to version 3.11.1:
+  New encapsulation format for LJZJStream class.
+  Alignment of cartridges over LEDM (Low End Data Model).
+  LEDM dynamic scan resolution.
+  New fax protocol (Low End Data Model) support.
+  ADF and color scan for some HP LaserJet Pro and MFP devices.
+  Some more supported all-in-one devices.
+  Many bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Adapted change-udev-rules.diff for version 3.11.1
+  because the "DesignJet product (0x03f0xx14)" was added.
+* Thu Jan 13 2011 jsmeix@suse.de
+-  hplip-3.9.8-CVE-2010-4267.patch fixes a remote buffer overflow
+  (CVE-2010-4267 and Novell/Suse Bugzilla bnc#336658).
+* Wed Dec 29 2010 gber@opensuse.org
+- Use more appropriate categories for hplip.desktop
+  'Settings HardwareSettings Printing' instead of 'System Monitor'
+* Fri Dec  3 2010 jsmeix@suse.de
+- Removed explicite RPM requirement for pyxml. At least since
+  openSUSE 11.1 and SLE11 pyxml is no longer required (pyxml was
+  required e.g. for openSUSE 10.3 and SLE10, see the entry below
+  dated "Wed Apr  2 14:40:57 CEST 2008") but meanwhile python-xml
+  alone is sufficient for "import xml.parsers.expat"
+  (see Novell/openSUSE Bugzilla bnc#656779 comment #3).
+- Added "Obsoletes: hplip-hpcups" because HPLIP does not work
+  if the openSUSE packages hplip and hplip-hpijs are installed
+  together with a leftover PackMan package hplip-hpcups
+  (see Novell/openSUSE Bugzilla bnc#515005 comment #17).
+- Do not pollute the build log file with zillions of meaningless
+  messages while "General tests and adjustments for all PPDs"
+  (compare the OpenPrintingPPDs.spec file).
+* Wed Oct 27 2010 jsmeix@suse.de
+- Added hp-systray.wrapper which is called
+  via /etc/xdg/autostart/hplip-systray.desktop
+  to increase desktop startup speed so that the purpose
+  of this hp-systray.wrapper is different to the
+  entry below dated "Tue Apr  8 14:56:53 CEST 2008".
+  hp-systray.wrapper tests via "lpstat" if a 'hp:/...'
+  print queue exists and exits otherwise.
+  This avoids that hp-systray with all its Python stuff must be
+  loaded when the desktop starts up only to let hp-systray do
+  its built-in test and exit if there is no HPLIP print queue
+  (see Novell/openSUSE Bugzilla bnc#649280).
+- Updated to version 3.10.9:
+  New Scan protocol (Low End Data Model) support.
+  Many more supported all-in-one devices.
+  Many bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.10.6:
+  New protocol support (LEDM) for device status over Network
+  and USB.
+  Some more supported all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.10.5:
+  Fixed "libusb couldn't open USB device, Permission denied"
+  error message in openSUSE.
+  Several more supported all-in-one devices.
+  Several bug fixes.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Wed Sep 15 2010 aj@suse.de
+- Change BuildRequires for sane-backends devel split.
+* Thu Apr  1 2010 jsmeix@suse.de
+- Updated to version 3.10.2:
+  The hpcups driver is again updated to better align with
+  the product specifications for various printer models.
+  Several more supported all-in-one devices.
+  Several bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.9.12:
+  The hpcups driver is updated to better align with the
+  product specifications for various printer models.
+  Several more supported printers.
+  Several bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.9.10:
+  The hpcups driver has been re-written. It does no longer do
+  bi-directional IO. Printer specific settings are no longer
+  hard coded, but are controlled by the PPD file.
+  Many more supported printers and all-in-one devices.
+  Several bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- hpcups.drv.in-3.9.8-reorder.patch and
+  hpcups-ppds-3.9.8-reorder.tar.bz2 are obsolete
+  because it is fixed in the source.
+- create_hal_global_fdi_from_hpmud_rules is obsolete
+  because HAL is no longer used to manage ACLs
+  (see Novell/Suse Bugzilla bnc#542473 comment#13).
+- change-udev-rules.diff fixes now also 56-hpmud_support.rules
+  (see for example Novell/Suse Bugzilla bnc#577035) and
+  it should trigger udev's generic ACL support for SANE
+  via 'ENV{libsane_matched}="yes"' in 55-hpmud.rules
+  (see Novell/Suse Bugzilla bnc#542473 comment#14).
+  Perhaps the latter could be better achieved with the
+  configure option --enable-udev-acl-rules (default=no)
+  which installs 40-hplip.rules instead of 55-hpmud.rules
+  but this was not at all tested up to now and it is
+  likely not backward compatible (e.g. for openSUSE 11.2).
+* Thu Oct 15 2009 jsmeix@suse.de
+- Also moved /usr/share/hplip/data/models/models.dat
+  and /etc/hp/hplip.conf to the hplip-hpijs sub-package
+  so that the "hp" backend can autodetect printers
+  (see Novell/Suse Bugzilla bnc#546856 comment#10).
+* Thu Oct 15 2009 jsmeix@suse.de
+- In the hplip-hpijs sub-package made weak package dependencies
+  even weaker to avoid bloating of minimal installations. Now
+  the hplip-hpijs sub-package only "Enhances: ghostscript_any"
+  and "Suggests: hplip" (see Novell/Suse Bugzilla bnc#546893).
+- Enlarged hplip-hpijs to be useful for a CUPS print queue.
+  Moved the following files from the hplip main package
+  to the hplip-hpijs sub-package: cups/backend/hp,
+  cups/filter/foomatic-rip-hplip, cups/filter/hpcac,
+  cups/filter/hpcups, cups/filter/hplipjs,
+  and all PPD files (see Novell/Suse Bugzilla bnc#546856).
+* Wed Sep 16 2009 jsmeix@suse.de
+- hpcups.drv.in-3.9.8-reorder.patch addresses two issues
+  in the 3.9.8 hpcups.drv.in file from which dynamic PPDs
+  are generated.
+  It re-orders common paper sizes so that normal, fullbleed
+  and duplex papers sizes are grouped together in the PPD.
+  It changes the LJColor device class from RGBW to RGB
+  color space. The K band was not being printed by hpcups.
+- The hpcups-ppds-3.9.8-reorder.tar.bz2 source file contains
+  the matching static PPDs which are fixed according to what
+  hpcups.drv.in-3.9.8-reorder.patch fixes for dynamic PPDs.
+* Thu Aug  6 2009 jsmeix@suse.de
+- The hplip.SuSEfirewall2 source file provides support
+  to open UDP ports 5353(mdns) and 427(svrloc) for mDNS support
+  according to the init-suse-firewall in the tar ball
+  (see Novell/Suse Bugzilla bnc#528819).
+- Updated to version 3.9.8:
+  Added mDNS/Bonjour support.
+  Enabled mDNS as the default network search mechanism.
+  Added front-end support for mDNS/Bonjour in setup.
+  Added hpmud support for mDNS.
+  The tar ball provides a init-suse-firewall init script
+  for mDNS support which is not included in the RPM.
+  Fixed wificonfig associate issue when called from hp-setup.
+  Added 40-hplip.rules to the tar ball for distros with
+  udev ACL support. Use configure option --enable-udev-acl-rules
+  to install 40-hplip.rules instead of 55-hpmud.rules.
+  Fixed Normal Grayscale on DJ8xx and DJ8x5 for HPCUPS.
+  Added -lsane link option for libsane-hpaio in Makefile.
+  Many more supported printers and all-in-one devices.
+  Many bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Wed Jul  1 2009 jsmeix@suse.de
+- Fixed hp-toolbox.wrapper by adding "..." quotation when
+  calling 'test -x "$( type -p whatever )"' because
+  when 'type -p whatever' fails calling 'test -x' without
+  an explicite empty argument would result true
+  (see Novell/Suse Bugzilla bnc#503322 comment#6).
+- fix_gcc44_glib.diff is obsolete since version 3.9.6b
+  because it is fixed in the source.
+- Updated to version 3.9.6b:
+  The new native CUPS driver (HPCUPS) is now the default
+  printer driver. HPCUPS provides new paper sizes for borderless
+  and duplex so that there are now HPCUPS PPDs with exact
+  printable regions for normal, borderless and duplex paper sizes
+  which should fix https://bugs.launchpad.net/hplip/+bug/173857
+  For now HPIJS (and its matching foomatic-rip-hplip PPDs)
+  are still included (HPIJS can co-exist with HPCUPS).
+  A new utility 'hp-wificonfig' can pre-configure wifi-capable
+  printers on a wireless network. Once pre-configured, a queue
+  for the printer can be set up as usual using hp-setup.
+  Renamed hp-devicesetup to hp-devicesettings.
+  Added CUPS filter hpcupsfax and new hpcups fax PPDs.
+  Bumped libhpmud.so.0.0.4 to libhpmud.so.0.0.5.
+  Integrated --enable-lite-build (default=no) into configure.in
+  which can be used to get a minimal print/scan only build with
+  limited Plugin support (Novell/Suse provides the "full" build).
+  Many more supported printers and all-in-one devices.
+  Many bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Tue Jun  2 2009 jsmeix@suse.de
+- fix_gcc44_glib.diff fixes GCC/glibc issues, here in particular
+  "invalid conversion from 'const char*' to 'char*'" errors.
+  The upstream bug report is
+  https://bugs.launchpad.net/hplip/+bug/382720
+* Tue May  5 2009 jsmeix@suse.de
+- force-qt4-for-hp-systray-desktop.diff is obsolete because
+  configure uses --enable-qt4 by default now which obsoletes
+  also "Recommends: python-qt" (only python-qt4 is required).
+- Updated to version 3.9.4b:
+  A few bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.9.4:
+  Added PolicyKit support. Command line tools like hp-setup,
+  hp-plugin, etc. are now run as regular user.
+  Added GPG digital signature support to the HPLIP plug-in
+  to validate that the plug-in is not corrupted and authentic.
+  Added native CUPS driver support (hpcups) currently for
+  testing only and added static PPDs for hpcups.
+  Some more supported printers and all-in-one devices
+  (in particular a few Designjet PostScript printers).
+  Many bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 3.9.2:
+  Qt4 now default UI.
+  Support policy change. End of support date is added to
+  all HPLIP supported devices, for details see
+  http://hplipopensource.com/node/314
+  New file /var/lib/hp/hplip.state for runtime variable data.
+  Removed any variable data from /etc/hp/hplip.conf.
+  Some more supported printers and all-in-one devices.
+  Major bug fixing on Qt4 solution (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 2.8.12:
+  From this release forward, all PPD files - even for devices
+  that require a binary plug-in - will reside in the tarball
+  (the "plugin PPDs" are moved into hpijs.drv).
+  Preview (alpha) release of the Qt4 version of HPLIP.
+  Replaced "MODE 0666" udev device permissions with
+  "console permissions via HAL".
+  No new supported devices.
+  Several bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 2.8.10:
+  Bumped libhpmud version for new plugin attribute.
+  Many more supported printers and all-in-one devices.
+  Several bug fixes (no Suse bugs).
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+- Updated to version 2.8.9:
+  Added Qt4 configure option but Qt3 is the default.
+  Many bug fixes (no Suse bugs).
+  Several more supported printers, in particular
+  some Compact Photo (QuickConnect) printers.
+  For details see
+  http://hplipopensource.com/hplip-web/release_notes.html
+* Wed Dec  3 2008 lnussel@suse.de
+- use "usb" instead of "usb_device" (bnc#438867)
+* Wed Dec  3 2008 jsmeix@suse.de
+- Moved /etc/hal/fdi/policy/10osvendor/70-hpmud.fdi
+  to /usr/share/hal/fdi/information/20thirdparty/70-hpmud.fdi
+  (see Novell/Suse Bugzilla bnc#438867).
+* Tue Nov 18 2008 jsmeix@suse.de
+- Let suse_update_desktop_file add X-SuSE-translate key
+  to /etc/xdg/autostart/hplip-systray.desktop so that we can
+  update its translations with translation-only packages
+  (see Novell/Suse Bugzilla bnc#445738).
+* Tue Oct 21 2008 jsmeix@suse.de
+- Changed change-udev-rules.diff to jump to the end
+  if SUBSYSTEM!="usb" and replaced SYSFS by ATTR
+  (see Novell/Suse Bugzilla bnc#436085).
+* Tue Sep 16 2008 jsmeix@suse.de
+- Added "Recommends: hplip" to hplip-hpijs because when only
+  hplip-hpijs is there, it should tell the dependency resolver
+  that for usual functionality, hplip should be installed
+  too (if possible).
+* Thu Sep 11 2008 jsmeix@suse.de
+- force-qt4-for-hp-systray-desktop.diff forces Gnome and KDE
+  to execute hp-systray as "hp-systray --qt4" via
+  /etc/xdg/autostart/hplip-systray.desktop so that
+  hp-systray docks to the notification tray of the desktops.
+  Because of this the python-qt4 RPM is now required
+  (see Novell/Suse Bugzilla bnc#377575).
+  This additional requirement should be no problem because
+  in an upcoming release HPLIP is converted over to Qt4, see
+  https://bugs.launchpad.net/hplip/+bug/231978/comments/7
+  and then the "Recommends: python-qt" can be dropped
+  (see the entry below) but currently only hp-systray
+  can be used with Qt4.
+* Wed Sep 10 2008 jsmeix@suse.de
+- Do no longer have a hard RPM requirement for python-qt
+  (now there is only "Recommends: python-qt") to be able
+  to provide hplip even on a distribution without python-qt.
+  Without python-qt all GUI stuff would fail but
+  several /usr/bin/hp-* tools have a command line
+  option to run in non-graphical mode so that the basic driver
+  functionality still works even without python-qt.
+- Have versioned "Obsoletes" for hpijs-standalone to meet our
+  policies even if the real intention is that any installed
+  version of hpijs-standalone is replaced and explain the
+  unversioned "Obsoletes" for hplip17 and hplip17-hpijs
+  (see Novell/Suse Bugzilla bnc#251830).
+* Tue Sep  9 2008 jsmeix@suse.de
+- The configure option disable-foomatic-xml-install
+  does no longer exist.
+- Updated to version 2.8.7:
+  Some bug fixes (no Suse bugs).
+  Some more supported printers.
+  For details see release_notes.html
+- Updated to version 2.8.6b:
+  Replaced the doc directory with an abbreviated web document
+  (there is no longer hpijs.html and device_classes.html).
+  Redesigned the proprietary plugin support. There is now only
+  one plugin that is valid for each HPLIP release, see
+  https://answers.launchpad.net/hplip/+question/30595
+  Changed the hpijs.drv to support multiple products via
+  multiple "Product" entries in the PPD but see
+  https://bugs.launchpad.net/hplip/+bug/235148
+  Several bug fixes (no Suse bugs).
+  Many more supported printers.
+  For details see release_notes.html
+- Updated to version 2.8.5:
+  Major toolbox (HP Device Manager) revamp/refresh.
+  More dbus support (live status updating).
+  hp-systray will exit if no HPLIP installed queues found which
+  obsoletes HPLIP-2.8.4-systray_exit_if_no_device_2.patch
+  Many bug fixes (no Suse bugs).
+  Several more supported printers.
+  For details see release_notes.html
+* Fri Sep  5 2008 jsmeix@suse.de
+- Keep all PPDs even if cupstestppd FAILs.
+  With each CUPS version upgrade cupstestppd finds more
+  and more errors so that more and more PPDs would be
+  no longer included in the RPM which have been included
+  before which results a regression.
+  As far as we know there have been no problems at all because of
+  not strictly compliant PPDs in HPLIP so that it is much better
+  to provide all PPDs so that the matching printers can be used
+  than to be rigorous regarding compliance to the PPD spec.
+* Thu Sep  4 2008 jsmeix@suse.de
+- Changed the "Conflicts: hpijs-standalone" in hplip-hpijs
+  to "Obsoletes: hpijs-standalone" regardless of any version.
+  hplip-hpijs and hpijs-standalone both contain /usr/bin/hpijs
+  so that both packages have a RPM conflict.
+  But when the minimalist hpijs-standalone is to be replaced
+  by the full-featured hplip, hplip requires hplip-hpijs
+  and this should silently supersede hpijs-standalone
+  regardless of any version (see Novell/Suse Bugzilla bnc#388149).
+* Thu Aug 14 2008 jsmeix@suse.de
+- Removed the hplip init script which is obsolete since
+  version 2.8.4 where hpssd is gone and replaced by
+  hp-systray, see Novell/Suse Bugzilla bnc#390663.
+* Tue Apr 29 2008 jsmeix@suse.de
+- Added RPM requirement for python-gobject2 because the dbus stuff
+  in HPLIP requires the Python module gobject but there is no
+  automated RPM requirement for python-gobject2, see
+  https://answers.launchpad.net/hplip/+question/30741
+* Thu Apr 10 2008 jsmeix@suse.de
+- HPLIP-2.8.4-systray_exit_if_no_device_2.patch lets hp-systray
+  exit if the HPLIP driver seems to be not in use (i.e. if there
+  is neither a 'hp:/...' nor a 'hpfax:/...' print queue), see
+  https://bugs.launchpad.net/hplip/+bug/213938
+  This patch obsoletes the whole hp-systray.wrapper stuff,
+  see the entry below and Novell/Suse Bugzilla bnc#377885.
+* Tue Apr  8 2008 jsmeix@suse.de
+- Added hp-systray.wrapper which is a wrapper for hp-systray
+  which runs it only if there is a 'hp:/...' print queue
+  and changed /etc/xdg/autostart/hplip-systray.desktop
+  to run the wrapper, see Novell/Suse Bugzilla bnc#377885.
+* Thu Apr  3 2008 jsmeix@suse.de
+- Updated to version 2.8.4:
+  Elimination of all persistent startup daemons.
+  The last daemon hpssd has been replaced with hp-systray.
+  All interprocess communication uses now dbus.
+  Therefore dbus-1-python version 0.80 or greater is required.
+  PC send fax requires dbus and a running hp-systray to operate
+  but hp-toolbox and hp-sendfax launch hp-systray automatically
+  and there is also /etc/xdg/autostart/hplip-systray.desktop.
+  When no HPLIP tools are running (e.g. hp-toolbox),
+  and the user closes or disables hp-systray,
+  there will be no HPLIP processes running whatsoever.
+  Many bug fixes (no Suse bugs).
+  One more supported LaserJet ZJStream printers (M1120),
+  one OfficeJet (J6400), and two Photosmart (C4340, B8800)
+  where the latter has a new printer device class (PSB9100).
+  For details see release_notes.html
+- Adapted the hplip init script to provide backward compatibility:
+  It still exists to avoid that printer/scanner setup tools fail
+  when they try to enable the "hplip" service but all it does
+  is to stop a possibly running hpssd.
+* Wed Apr  2 2008 jsmeix@suse.de
+- Exchanged create_hal_global_fdi_from_models.dat with
+  create_hal_global_fdi_from_hpmud_rules which creates the
+  global HAL 70-hpmud.fdi file during build-time from the
+  55-hpmud.rules file to be in sync with the udev rules file
+  and to make sure to have all possible HPLIP device IDs, see
+  https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/195782
+- Require the exact matching version of the hpijs sub-package
+  to have the correct libhpip and libhpmud installed.
+- Require pyxml to have the xml.parsers.expat Python module,
+  see https://answers.launchpad.net/hplip/+question/25696
+* Tue Feb 26 2008 jsmeix@suse.de
+- Static "hpijs" PPD files via enable-foomatic-ppd-install
+  require foomatic-rip-hplip via their cupsFilter entries
+  so that enable-foomatic-rip-hplip-install is also needed.
+  See https://answers.launchpad.net/hplip/+question/25654
+  and see Novell/Suse Bugzilla bnc#364419.
+* Thu Feb 21 2008 jsmeix@suse.de
+- create_hal_global_fdi_from_models.dat creates the
+  global HAL 70-hpmud.fdi file during build-time from the
+  models.dat file (see Novell/Suse Bugzilla bnc#336658).
+- Built version 2.8.2 in the traditional way with readymade
+  PPD files in /usr/share/cups/model/manufacturer-PPDs/hplip/
+  (i.e. without hpijs.drv and foomatic-rip-hplip)
+- Updated to version 2.8.2:
+  HPIJS PPD files are now created with the CUPS DDK instead of
+  the foomatic database. Dynamic PPD files are now supported
+  via the hpijs.drv file.
+  Added foomatic-rip-hplip support. Foomatic-rip-hplip is for
+  distros that do not have the latest foomatic-rip which is
+  required for drv support.
+  Updated the krgb patch for gpl ghostscript 8.61.
+  Updated the "hp" backend to return only hplip supported devices
+  during device discovery. If the device is not in models.dat
+  the "hp" backend will exclude it.
+  Changed margins to 0.125 inch from 0.
+  Bumped libhpmud from 0.0.1 to 0.0.2 for support_type
+  in hpmud_query_model().
+  Several bug fixes (no Suse bugs).
+  Several more supported printers (some more ZJStream printers).
+- Updated to version 2.7.12:
+  Added PJL support to "hp" backend which provides in-band
+  printer status.
+  Bumped libhpmud from 0.0.0 to 0.0.1 for statustype support
+  in hpmud_query_model().
+  Several bug fixes (no Suse bugs).
+  Several more supported LaserJet printers, one ZJStream printer,
+  one LJm1005 printer with binary-only plugin (LaserJet M1005 MFP).
+* Fri Nov  9 2007 jsmeix@suse.de
+- Changed rchplip (i.e. /etc/init.d/hplip):
+  Added "$local_fs $remote_fs $syslog" to Required-Start
+  to be on the safe side and added a line "export HOME=/tmp"
+  to mitigate Novell/Suse Bugzilla bnc#339443.
+* Tue Oct 23 2007 jsmeix@suse.de
+- Updated to version 2.7.10:
+  New LJZjsMono printer device class for ZJStream printers.
+  ZJStream printers require JBIG which has issues
+  (see Novell/Suse Bugzilla bnc#263181). Therefore the support
+  for ZJStream printers is provided only via a binary-only plugin
+  which is downloaded by "hp-setup" from the HP web-site only after
+  the user has accepted the license terms.
+  Applied patch for issue CVE-2007-5208 (hpssd command injection)
+  Several bug fixes (no Suse bugs).
+  Two more supported Photosmart and Officejet printers.
+  For details see release_notes.html
+- Updated to version 2.7.9:
+  Made the default udev 55-hpmud.rules file more permissive
+  (ie: MODE=0666) so that also device status works for any user.
+  This looks sufficiently secure by default because the
+  55-hpmud.rules matches now only for those USB product IDs
+  which belong to HP printers and all-in-one devices so that
+  other HP USB devices like keyboard, mouse, and mass storage
+  devices won't get MODE=0666 by accident.
+  All known product-ids that HPLIP/HPIJS supports have been
+  added to the model.dat file.
+  Many bug fixes (no Suse bugs).
+  Some more supported Photosmart and Officejet printers.
+  For details see release_notes.html
+* Tue Sep 18 2007 jsmeix@suse.de
+- Add a line-feed to the end of all PPDs to fix those PPDs where
+  it is missing. See Novell/Suse Bugzilla bnc#309832:
+  Unix/Linux text files must end with a line-feed.
+  Otherwise reading the last line results EOF and then some
+  programs may ignore the last line.
+* Wed Sep 12 2007 jsmeix@suse.de
+- Ignore cupstestppd FAILs because of errors in UIConstraints
+  and/or NonUIConstraints which are detected since cupstestppd
+  in CUPS > 1.2.7 (i.e. since openSUSE 10.3).
+  See Novell/Suse Bugzilla bnc#309822: When this bug is fixed,
+  cupstestppd would no longer result zero exit code.
+  In the long run the PPDs should be fixed but as far as we know
+  there have been no problems because of such UIConstraints errors
+  so that it should be o.k. let those PPDs pass even if they are
+  not strictly compliant.
+* Tue Aug  7 2007 jsmeix@suse.de
+- Changed /etc/udev/rules.d/55-hpmud.rules (via a change in
+  change-udev-rules.diff) from OWNER="root" GROUP="lp" MODE="0660"
+  to OWNER="root" GROUP="lp" MODE="0664" (i.e. allow read
+  permissions for HP USB device files for normal users).
+  Reason: Without read permissions even a simple command
+  like "lsusb" cannot list HP USB devices to normal users
+  which could cause unnecessary confusion.
+  Furthermore have only read permissions for HP USB device files
+  for normal users is in compliance to the default assumptions
+  in upstream HPLIP and it should be sufficiently secure because
+  for retrieving data from the device a matching request must be
+  sent to the device which requires write permissions.
+* Thu Aug  2 2007 jsmeix@suse.de
+- Updated to version 2.7.7:
+  Many bug fixes (no Suse bugs).
+  Some more supported Photosmart printers.
+  For details see release_notes.html
+- fix-printing-white-spaces-and-empty-lines.diff is no longer
+  needed because the bug is now fixed in the source.
+* Thu Jul 26 2007 jsmeix@suse.de
+- Changed change-udev-rules.diff so that 55-hpmud.rules matches
+  also against the new SUBSYSTEM=="usb" but keep "usb_device"
+  for backward compatibility (Novell/Suse Bugzilla bnc#294161).
+* Fri Jul  6 2007 jsmeix@suse.de
+- fix-printing-white-spaces-and-empty-lines.diff fixes printing
+  white spaces and empty lines according to a mail from HP
+  on the hplip-help@lists.sourceforge.net list.
+* Tue Jul  3 2007 jsmeix@suse.de
+- Updated to version 2.7.6:
+  No more start-up daemons:
+  hpiod is replaced by new direct device I/O (via hpmud library),
+  hpssd (for device status) still exists but is started by default
+  as a daemon by the first user who needs it which is not nice
+  because this results a random user which runs hpssd therefore
+  we (i.e. Novell/Suse) still provide /etc/init.d/hplip which
+  is used to start hpssd as before during system boot.
+  Many bug fixes (no Suse bugs) and some enhancements.
+  Some more supported Photosmart, Color LaserJet, and DeskJet
+  printers.
+  For details see release_notes.html
+* Thu Jun 21 2007 jsmeix@suse.de
+- Added stop_on_removal to preun, insserv_cleanup to postun,
+  and ldconfig to post and postun for the hpijs sub-package.
+* Thu May 24 2007 ro@suse.de
+- Added libusb-devel to BuildRequires.
+* Fri Apr 27 2007 jsmeix@suse.de
+- Updated to version 1.7.4a:
+  Resolved a build issue that caused a couple missing files
+  in the 1.7.4 release and a fix for hp-check (no Suse bugs).
+* Mon Apr 23 2007 jsmeix@suse.de
+- Updated to version 1.7.4:
+  Many bug fixes (no Suse bugs).
+  Some more supported DeskJet printers.
+  For details see release_notes.html
+* Mon Mar 26 2007 jsmeix@suse.de
+- Updated to version 1.7.3:
+  Many bug fixes (no Suse bugs).
+  No new supported models but enhancements for some models.
+  For details see release_notes.html
+* Thu Mar  1 2007 jsmeix@suse.de
+- Updated to version 1.7.2:
+  Several more supported Officejet Pro devices.
+  New OJProKx50 device class (derived from DJGenericVIP).
+  Major hp-toolbox upgrade/redesign.
+  Many bug fixes (no Suse bugs).
+  fix-buffer-overflow.patch and hplip-1.7.1-1.patch are no longer
+  needed because the bugs are now fixed in the sources.
+* Fri Feb 16 2007 jsmeix@suse.de
+- Added a fix for fat.c to fix-buffer-overflow.patch
+  to aviod access when array subscript is above array bounds
+  (Suse Bugzilla bnc#243047).
+- Remove all byte-compiled Python .pyc (and perhaps .pyo)
+  files which are created at run-time in /usr/share/hplip/
+  via preun script (Suse Bugzilla bnc#244451).
+* Mon Feb  5 2007 jsmeix@suse.de
+- fix-buffer-overflow.patch fixes a too small string buffer
+  which overflows in line 310 in ljcolor.cpp.
+- Moved the hpijs man page to the hplip-hpijs sub-package
+  so that there is no same file in hplip and hpijs-standalone
+  (hplip-hpijs and hpijs-standalone conflict with each other).
+* Thu Feb  1 2007 jsmeix@suse.de
+- hplip-1.7.1-1.patch from HP fixes Deskjet D4100/D4160
+  christmas-tree (firmware hangs up with flashing LEDs)
+  on second print job.
+- Removed /usr/bin/hpijs.without-libcups from hplip-hpijs
+  to get rid of confusing RPM package requirements (hplip-hpijs
+  requires cups-libs because of /usr/bin/hpijs).
+- Created new package hpijs-standalone and hpijs-standalone.spec
+  for a special version of /usr/bin/hpijs which neither needs
+  a HPLIP library nor a CUPS library to run it.
+* Wed Jan 31 2007 jsmeix@suse.de
+- Removed explicite fstack-protector-all from CFLAGS and CXXFLAGS
+  because fstack-protector will be enabled by default.
+* Mon Jan 29 2007 jsmeix@suse.de
+- Package 'sane' was renamed to 'sane-backends'.
+  Adapted it so that it works with 'sane-backends'.
+* Thu Jan 25 2007 jsmeix@suse.de
+- Updated to version 1.7.1:
+  Many bug fixes (no Suse bugs).
+  No new supported models but enhancements for several models.
+  For details see release_notes.html
+- Removed the fix for uninitialized file pointer in api/model.c
+  from fix-uninitialized-variables.diff because it is now
+  fixed in the sources.
+* Fri Jan 19 2007 jsmeix@suse.de
+- Added fix for uninitialized file pointer in api/model.c to
+  fix-uninitialized-variables.diff (Suse Bugzilla bnc#236709).
+* Fri Jan 12 2007 jsmeix@suse.de
+- Since version 1.6.12 /usr/bin/hpijs is linked with libcups
+  so that the package hplip-hpijs could be no longer installed
+  without at least the package cups-libs. Therefore an additional
+  special /usr/bin/hpijs.without-libcups is built which does not
+  require the CUPS library.
+* Wed Dec 20 2006 jsmeix@suse.de
+- Updated to version 1.6.12:
+  Three more supported LaserJet printers.
+  Many bug fixes (no Suse bugs).
+  For details see release_notes.html
+  Added SANE_DEBUG_HPAIO support for the hpaio SANE backend.
+  The new models.dat file replaces the .xml files. The hplip_api
+  can be used to get model attributes without running the HPLIP
+  daemons. See hplip_api.h for reference (this affects the Suse
+  Bugzilla bugs bnc#184798 and bnc#184824).
+- Fixed hp-toolbox.wrapper to catch 'error' regardless of the case
+  (see Suse Bugzilla bnc#229620).
+* Tue Oct 17 2006 jsmeix@suse.de
+- Updated to version 1.6.10:
+  Several more supported LaserJet printers.
+  Many bug fixes (no Suse bugs).
+- Fixed typo in keyword in some LaserJet PPDs
+  ("* PageRegion" -> "*PageRegion").
+* Mon Sep 18 2006 jsmeix@suse.de
+- Updated to version 1.6.9:
+  Added support CD/DVD label printing (ie: PS D5100).
+  Several more supported Photosmart printers.
+  Many bug fixes (no Suse bugs).
+* Mon Sep 11 2006 jsmeix@suse.de
+- Using generalised cupsext* and pcardext* in the files section
+  (instead of explicit only cupsext.so and pcardext.so)
+  so that it works now both for Python 2.4 and 2.5
+  (the latter installs additional *.egg-info files).
+* Mon Sep  4 2006 jsmeix@suse.de
+- Exchanged the hard RPM requirement for ghostscript_any by a
+  supplements entry for hplip-hpijs so that there is no longer
+  a mutual (cyclic) hard RPM dependency between hplip-hpijs
+  and ghostscript-library.
+* Thu Aug  3 2006 jsmeix@suse.de
+- Updated to version 1.6.7:
+  Changed from dynamic IP ports to static IANA IP ports
+  for hpiod (2208) and hpssd (2207).
+  Two more supported Photosmart printers.
+  Several bug fixes (no Suse bugs).
+* Mon Jul 17 2006 jsmeix@suse.de
+- Fixed PPDs which contain "1284DeviceId" which must be
+  "1284DeviceID" (detected by new CUPS 1.2 cupstestppd).
+* Wed Jun 28 2006 jsmeix@suse.de
+- Updated to maintenance release 1.6.6a:
+  This provides various minor fixes and enhancements.
+  For details see doc/release_notes.html in the source
+  or /usr/share/doc/packages/hplip/release_notes.html
+* Mon Jun 19 2006 jsmeix@suse.de
+- Updated to version 1.6.6:
+  HPLIP has reached 1.0 status.
+  With this release a date encoded revision number x.y.m is used:
+  x = major release number, y = year (6=2006), m = month (6=June)
+  Correct URLs in HTML docs (obsoletes fix-doc-hrefs.diff).
+  Removed DeviceOpen from hp backend. This fixes two problems:
+  1) usblp will no longer be removed for device discovery
+  2) device discovery will no longer cause Inkjets to power-up.
+  Added hpaio.desc file for SANE.
+  Several more supported printers.
+- Cleaned up build (simplified spec file):
+  Changed install dir for PPDs and doc in Makefile.am.
+  Using configure without rpm-install.
+  Using configure with --disable-cups-install.
+  Links to work around inconsistent naming of python scripts
+  and links to hpfax backend and its associated PPD file
+  are no longer needed.
+* Fri Jun  9 2006 jsmeix@suse.de
+- Added man page for /usr/bin/hpijs (hpijs.1.gz).
+- Fixed wrong URLs in HTML documentation (fix-doc-hrefs.diff).
+- Added links to work around inconsistent naming of python scripts.
+- Added links to hpfax backend and its associated PPD file
+  to make them available as usual for CUPS setup tools.
+* Mon May 22 2006 jsmeix@suse.de
+- Fixed typo (missing '"') in hplip-init-script.diff
+* Fri May 19 2006 jsmeix@suse.de
+- Updated to version 0.9.11:
+  Revised and updated documentation.
+  Some more supported all-in-one devices and printers.
+  Several bug fixes (no Suse bugs).
+- Updated to version 0.9.10:
+  Several bug fixes (no Suse bugs).
+- Updated to version 0.9.9:
+  Uses libusb for all USB I/O.
+  CUPS USB DeviceURIs must be changed from
+  "hp:/hp_model?device=/dev/usb/lpX" (no longer supported)
+  to "hp:/hp_model?serial=xxxxxxxx".
+  One more supported all-in-one device.
+  Several bug fixes (no Suse bugs).
+- Updated to version 0.9.8:
+  New PC send fax support via special CUPS backend (hpfax)
+  and special HP-Fax-hplip.ppd PPD file
+  and a new send fax UI (hp-sendfax).
+  Some more supported printers.
+  Several bug fixes (no Suse bugs).
+* Wed Apr 26 2006 jsmeix@suse.de
+- Fixed PPDs for "LaserJet 5Si" and "LaserJet 5MP"
+  (see Suse Bugzilla bnc#164991).
+* Fri Feb 24 2006 jsmeix@suse.de
+- Fixed an array index underflow (for LJ1010, LJ1012)
+  in ljfastraster.cpp (Suse Bugzilla bnc#152720).
+* Wed Jan 25 2006 mls@suse.de
+- converted neededforbuild to BuildRequires
+* Thu Jan 12 2006 jsmeix@suse.de
+- Set compiler flag "-fstack-protector-all" to build it with
+  "Stack Protector" via a so called "canary" (requires gcc >= 4.1)
+* Wed Jan  4 2006 jsmeix@suse.de
+- Moved /usr/lib[64]/libhpip.* library files to the hplip-hpijs
+  sub-package because /usr/bin/hpijs requires libhpip but for
+  special cases (e.g. for a minimal printing system) it should
+  be possible to use only HPIJS without the rest of HPLIP.
+* Tue Jan  3 2006 jsmeix@suse.de
+- Updated to version 0.9.7
+  including the additional hplip-0.9.7-2.patch from HP.
+* Thu Dec 22 2005 ro@suse.de
+- requires: PyQt -> python-qt
+* Thu Dec  1 2005 jsmeix@suse.de
+- Removed unneeded KDE packages from "neededforbuild" since
+  the new package python-qt was split from kdebindings3-python
+  (see Suse Bugzilla bnc#135250).
+* Mon Nov 28 2005 jsmeix@suse.de
+- Replaced requirement for the package kdebindings3-python
+  by a generic requirement for the RPM capability PyQt
+  to avoid needless dependencies to KDE libraries
+  (see Suse Bugzilla bnc#135250).
+* Tue Nov 22 2005 jsmeix@suse.de
+- Added -fno-strict-aliasing to the CXXFLAGS to avoid problems
+  in ljfastraster.cpp (line 1213) and hpijs.cpp (lines 86, 223).
+* Fri Nov 18 2005 jsmeix@suse.de
+- Updated to version 0.9.6
+* Wed Sep 21 2005 jsmeix@suse.de
+- Updated to version 0.9.5
+  including the additional hplip-0.9.5-3.patch from HP.
+* Mon Sep 12 2005 jsmeix@suse.de
+- Several PPDs contain "600x600x2dpi" which is not allowed
+  according to the Adobe PPD specification section 5.9
+  and which is therefore simply replaced by "600x1200dpi"
+  (see Suse Bugzilla bnc#116393).
+* Mon Aug 29 2005 jsmeix@suse.de
+- Removed a non-working PPD.
+- Fix "... is used uninitialized ..." warning.
+* Tue Jul 26 2005 jsmeix@suse.de
+- Updated to version 0.9.4
+- Removed obsolete fixes for missing class prototypes.
+- Removed obsolete fixes for HP_Business_Inkjet_3000.ppd
+- Added a fix for condrestart in /etc/init.d/hplip
+* Tue May 31 2005 jsmeix@suse.de
+- Updated to version 0.9.3
+* Tue May 24 2005 jsmeix@suse.de
+- Fixed missing class prototypes, otherwise it fails with
+  "error: ISO C++ forbids declaration of 'xxx' with no type".
+* Tue May 17 2005 jsmeix@suse.de
+- Fix "... is used uninitialized ..." warnings.
+* Wed May  4 2005 jsmeix@suse.de
+- Updated to version 0.9.2 which does no longer need
+  the "fix C" (i.e. hplip-0.8.8.diff) from below.
+* Sun Apr 10 2005 coolo@suse.de
+- fix C
+* Tue Mar 22 2005 jsmeix@suse.de
+- Added PreReq.
+* Thu Mar 17 2005 jsmeix@suse.de
+- Fixed a bug in HP-DeskJet_3740-hpijs.ppd.gz:
+  According to hpijs_readme.html the DeskJet 3740 belongs to the
+  DJ3320 device class.
+* Tue Mar  8 2005 jsmeix@suse.de
+- Added %%suse_update_desktop_file stuff for hp-toolbox.
+- Moved %%{_libdir}/libsane-hpaio.* to %%{_libdir}/sane/
+  instead of creating symlinks (see Tue Mar 1 11:15:33).
+* Tue Mar  1 2005 jsmeix@suse.de
+- Added python-xml to RPM requirements because otherwise
+  hpssd (i.e. /usr/share/hplip/hpssd.py) doesn't work.
+- Create symlinks (via '%%triggerin -- sane') to all
+  %%{_libdir}/libsane-hpaio.* so that SANE will find them.
+- Added kdebindings3-python to RPM requirements because otherwise
+  hp-toolbox (i.e. /usr/share/hplip/toolbox) doesn't work.
+* Tue Feb 22 2005 jsmeix@suse.de
+- Changed default media size from Letter to A4
+  if this is an available choice in the PPD.
+* Tue Feb 15 2005 jsmeix@suse.de
+- Updated to version 0.8.8, for details see ChangeLog and
+  http://hpinkjet.sourceforge.net/updates.php
+- Removed the "compatibility"-links because they are not needed.
+- Fixed basic stuff in the init script (needs further improvement).
+- Source should be x86_64 clean (SUSE patch no longer needed).
+* Tue Feb  1 2005 jsmeix@suse.de
+- Updated to version 0.8.7, for details see ChangeLog and
+  http://hpinkjet.sourceforge.net/updates.php
+- Added triggerin and postun scripts to add and remove
+  the SANE backend "hpaio" in /etc/sane.d/dll.conf
+- Replaced hplip-0.8.4-models.xml.diff by
+  hplip-0.8.7-models.xml.diff because the "HP LaserJet 1220"
+  is now in the models.xml file but the entry is buggy.
+* Tue Jan 25 2005 jsmeix@suse.de
+- Branched the sub-package hplip-hpijs which contains only
+  the plain HPIJS binary so that Ghostscript can require
+  only this sub-package (without all the other stuff).
+- Added a link to the toolbox program to have it accessible
+  via the user's PATH.
+- Added the usual 'rc'-link to the runlevel script.
+- Added the following RPM requirements regarding printing:
+  hplip requires hplip-hpijs and foomatic-filters
+  hplip-hpijs requires ghostscript_any
+  (There are no RPM requirements regarding scanning because
+  HPLIP will be also used for plain printers.)
+- Exchanged the destructive line for the cupsd in the runlevel script
+  because cupsd runs as user lp and dies in case of a SIGHUP.
+* Tue Jan 18 2005 jsmeix@suse.de
+- patch hplip-0.8.4-models.xml.diff adds the "HP LaserJet 1220"
+  to the list of known models of the SANE backend "hpaio"
+* Wed Jan 12 2005 sf@suse.de
+- add --libdir=%%_libdir to build on multilib archs
+- add patch for cups search path for backends
+* Thu Dec  2 2004 jsmeix@suse.de
+- initial version
diff --git a/packaging/no-chgrp_lp_hplip_Logdir.diff b/packaging/no-chgrp_lp_hplip_Logdir.diff
new file mode 100644
index 0000000..3388074
--- /dev/null
+++ b/packaging/no-chgrp_lp_hplip_Logdir.diff
@@ -0,0 +1,20 @@
+--- Makefile.am.orig	2012-04-10 10:35:14.000000000 +0200
++++ Makefile.am	2012-04-13 12:05:40.000000000 +0200
+@@ -509,14 +509,14 @@ endif
+ install-dist_hplip_LogDATA:
+ if FULL_BUILD
+ 	test -z "$(DESTDIR)$(hplip_Logdir)" || mkdir -p $(DESTDIR)$(hplip_Logdir)
+-	chgrp "lp" -R $(DESTDIR)$(hplip_Logdir)
++#	chgrp "lp" -R $(DESTDIR)$(hplip_Logdir)
+ 	chmod 774 $(DESTDIR)$(hplip_Logdir)
+ endif	#FULL_BUILD
+ if HPLIP_BUILD
+ 	test -z "$(DESTDIR)$(hplip_Logdir)" || mkdir -p $(DESTDIR)$(hplip_Logdir)
+-	chgrp "lp" -R $(DESTDIR)$(hplip_Logdir)
++#	chgrp "lp" -R $(DESTDIR)$(hplip_Logdir)
+ 	chmod 774 $(DESTDIR)$(hplip_Logdir)
+-endif	#FULL_BUILD
++endif	#HPLIP_BUILD
+ 
+ install-data-hook:
+ if HPLIP_BUILD
diff --git a/packaging/tizen_add_sigpipe_ign.patch b/packaging/tizen_add_sigpipe_ign.patch
new file mode 100644
index 0000000..720450f
--- /dev/null
+++ b/packaging/tizen_add_sigpipe_ign.patch
@@ -0,0 +1,11 @@
+--- prnt/hpcups/HPCupsFilter.cpp.orig	2012-09-18 13:38:56.754794644 +0900
++++ prnt/hpcups/HPCupsFilter.cpp	2012-09-17 14:10:09.481765002 +0900
+@@ -521,7 +521,7 @@
+  */
+
+     signal(SIGTERM, HPCancelJob);
+-
++	signal(SIGPIPE, SIG_IGN);
+
+     cups_raster = cupsRasterOpen(fd, CUPS_RASTER_READ);
+
diff --git a/packaging/tizen_disable_dbus_hpcups.patch b/packaging/tizen_disable_dbus_hpcups.patch
new file mode 100644
index 0000000..5e38389
--- /dev/null
+++ b/packaging/tizen_disable_dbus_hpcups.patch
@@ -0,0 +1,20 @@
+--- prnt/hpcups/HPCupsFilter.cpp.orig	2012-09-18 15:45:46.546793734 +0900
++++ prnt/hpcups/HPCupsFilter.cpp	2012-09-18 15:46:08.966793734 +0900
+@@ -408,7 +408,7 @@
+     }
+
+	string strPrinterURI="" ,strPrinterName= "";
+-	m_DBusComm.initDBusComm(DBUS_PATH,DBUS_INTERFACE, getenv("DEVICE_URI"), m_JA.printer_name);
++	//m_DBusComm.initDBusComm(DBUS_PATH,DBUS_INTERFACE, getenv("DEVICE_URI"), m_JA.printer_name);
+
+     ptr = strstr(m_argv[5], "job-uuid");
+     if (ptr) {
+@@ -429,7 +429,7 @@
+         {
+             fputs ("STATE: +hplip.plugin-error\n", stderr);
+
+-			m_DBusComm.sendEvent(EVENT_PRINT_FAILED_MISSING_PLUGIN, "Plugin missing", m_JA.job_id, m_JA.user_name);
++			//m_DBusComm.sendEvent(EVENT_PRINT_FAILED_MISSING_PLUGIN, "Plugin missing", m_JA.job_id, m_JA.user_name);
+
+         }
+         dbglog ("m_Job initialization failed with error = %d", err);
diff --git a/packaging/tizen_fix_debug_log.patch b/packaging/tizen_fix_debug_log.patch
new file mode 100644
index 0000000..1507c93
--- /dev/null
+++ b/packaging/tizen_fix_debug_log.patch
@@ -0,0 +1,11 @@
+--- prnt/hpcups/HPCupsFilter.cpp.orig	2012-10-30 16:05:54.096118488 +0900
++++ prnt/hpcups/HPCupsFilter.cpp	2012-10-30 16:08:33.800115451 +0900
+@@ -846,7 +846,7 @@
+     FILE    *fp;
+     char    str[258];
+     char    *p;
+-    fp = fopen ("/etc/cups/cupsd.conf", "r");
++    fp = fopen ("/opt/etc/cups/cupsd.conf", "r");
+     if (fp == NULL)
+         return;
+     while (!feof (fp))
diff --git a/packaging/tizen_fix_image_align.patch b/packaging/tizen_fix_image_align.patch
new file mode 100644
index 0000000..d0fbf62
--- /dev/null
+++ b/packaging/tizen_fix_image_align.patch
@@ -0,0 +1,11 @@
+--- prnt/hpcups/HPCupsFilter.cpp.orig	2012-10-30 16:05:54.096118488 +0900
++++ prnt/hpcups/HPCupsFilter.cpp	2012-10-30 16:08:33.800115451 +0900
+@@ -328,7 +328,7 @@
+     m_JA.media_attributes.printable_height = cups_header->cupsHeight;
+ 
+     m_JA.media_attributes.printable_start_x = (cups_header->Margins[0] * horz_res) / 72;
+-    m_JA.media_attributes.printable_start_y = ((cups_header->PageSize[1] - cups_header->ImagingBoundingBox[3]) * vert_res) / 72;
++    m_JA.media_attributes.printable_start_y = ( cups_header->Margins[1] * vert_res) / 72;
+ 
+     m_JA.media_attributes.horizontal_overspray = (xoverspray * horz_res) / 1000;
+     m_JA.media_attributes.vertical_overspray   = (yoverspray * vert_res) / 1000;