diff options
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | dracut-gencmdline.8.xml | 46 | ||||
| -rwxr-xr-x | dracut-gencmdline.sh | 716 | ||||
| -rw-r--r-- | dracut.spec | 2 |
4 files changed, 1 insertions, 767 deletions
@@ -9,7 +9,7 @@ sysconfdir ?= ${prefix}/etc bindir ?= ${prefix}/bin mandir ?= ${prefix}/share/man -manpages = dracut.8 dracut.cmdline.7 dracut.conf.5 dracut-catimages.8 dracut-gencmdline.8 +manpages = dracut.8 dracut.cmdline.7 dracut.conf.5 dracut-catimages.8 .PHONY: install clean archive rpm testimage test all check AUTHORS doc @@ -32,7 +32,6 @@ install: doc mkdir -p $(DESTDIR)$(pkglibdir)/modules.d mkdir -p $(DESTDIR)$(mandir)/man5 $(DESTDIR)$(mandir)/man7 $(DESTDIR)$(mandir)/man8 install -m 0755 dracut.sh $(DESTDIR)$(bindir)/dracut - install -m 0755 dracut-gencmdline.sh $(DESTDIR)$(bindir)/dracut-gencmdline install -m 0755 dracut-catimages.sh $(DESTDIR)$(bindir)/dracut-catimages install -m 0755 mkinitrd-dracut.sh $(DESTDIR)$(bindir)/mkinitrd install -m 0755 lsinitrd.sh $(DESTDIR)$(bindir)/lsinitrd @@ -45,7 +44,6 @@ install: doc cp -arx modules.d $(DESTDIR)$(pkglibdir) install -m 0644 dracut.8 $(DESTDIR)$(mandir)/man8/dracut.8 install -m 0644 dracut-catimages.8 $(DESTDIR)$(mandir)/man8/dracut-catimages.8 - install -m 0644 dracut-gencmdline.8 $(DESTDIR)$(mandir)/man8/dracut-gencmdline.8 install -m 0644 dracut.conf.5 $(DESTDIR)$(mandir)/man5/dracut.conf.5 install -m 0644 dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.cmdline.7 ln -s dracut.cmdline.7 $(DESTDIR)$(mandir)/man7/dracut.kernel.7 diff --git a/dracut-gencmdline.8.xml b/dracut-gencmdline.8.xml deleted file mode 100644 index a893d0b6..00000000 --- a/dracut-gencmdline.8.xml +++ /dev/null @@ -1,46 +0,0 @@ -<?xml version="1.0" encoding="ISO-8859-1"?> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []> -<!-- lifted from troff+man by doclifter --> -<refentry id='dracutgencmdline8'> -<refmeta> -<refentrytitle>DRACUT-GENCMDLINE</refentrytitle> -<manvolnum>8</manvolnum> -<refmiscinfo class='source'>June 2009</refmiscinfo> -<refmiscinfo class='manual'>Linux</refmiscinfo> -</refmeta> -<refnamediv id='name'> -<refname>dracut-gencmdline</refname> -<refpurpose>generates kernel command line parameters for the dracut generated initramfs</refpurpose> -</refnamediv> -<!-- body begins here --> -<refsynopsisdiv id='synopsis'> -<cmdsynopsis> - <command>dracut-gencmdline</command> - <sbr/> -</cmdsynopsis> -</refsynopsisdiv> - - -<refsect1 id='description'><title>DESCRIPTION</title> -<para><command>dracut-gencmdline</command> -generates kernel command line parameters for the dracut generated initramfs, which are very specific to the host system.</para> - -</refsect1> - -<refsect1 id='authors'><title>AUTHORS</title> -<literallayout remap='.nf'> -Harald Hoyer <harald@redhat.com> -</literallayout> <!-- .fi --> -</refsect1> - -<refsect1 id='availability'><title>AVAILABILITY</title> -<para>The dracut-gencmdline command is part of the dracut package and is available from -<ulink url='https://dracut.wiki.kernel.org'>https://dracut.wiki.kernel.org</ulink></para> - -</refsect1> - -<refsect1 id='see_also'><title>SEE ALSO</title> -<para><citerefentry><refentrytitle>dracut</refentrytitle><manvolnum>8</manvolnum></citerefentry></para> -</refsect1> -</refentry> - diff --git a/dracut-gencmdline.sh b/dracut-gencmdline.sh deleted file mode 100755 index c909e27b..00000000 --- a/dracut-gencmdline.sh +++ /dev/null @@ -1,716 +0,0 @@ -#!/bin/bash --norc -# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- -# ex: ts=8 sw=4 sts=4 et filetype=sh -# -# Copyright 2005-2009 Red Hat, Inc. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -# code taken from mkinitrd -# -#. /usr/libexec/initrd-functions - -IF_verbose="" -function set_verbose() { - case $1 in - 1|true|yes|on) - IF_verbose="-v" - ;; - 0|false|no|off) - IF_verbose="" - ;; - esac -} - -function is_verbose() { - [ -n "$IF_verbose" ] && return 0 - return 1 -} - -function get_verbose() { - echo "$IF_verbose" - is_verbose -} - - -function get_numeric_dev() { - ( - fmt="%d:%d" - if [ "$1" == "hex" ]; then - fmt="%x:%x" - fi - ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }' - ) 2>/dev/null -} - - -function error() { - echo "$@" >&2 -} - -function vecho() { - is_verbose && echo "$@" -} - -# module dep finding and installation functions -moduledep() { - MPARGS="" - if [ "$1" == "--ignore-install" ]; then - MPARGS="$MPARGS --ignore-install" - shift - fi - vecho -n "Looking for deps of module $1" - deps="" - deps=$(modprobe $MPARGS --set-version $kernel --quiet --show-depends $1 | awk '/^insmod / { print gensub(".*/","","g",$2) }' | while read foo ; do [ "${foo%%.ko}" != "$1" ] && echo -n "${foo%%.ko} " ; done) - [ -n "$deps" ] && vecho ": $deps" || vecho -} - -export MALLOC_PERTURB_=204 - -PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH -export PATH - -# Set the umask. For iscsi, the initrd can contain plaintext -# password (chap secret), so only allow read by owner. -umask 077 - -VERSION=6.0.87 - -PROBE="yes" -MODULES="" -GRAPHICSMODS="" -PREMODS="" -DMRAIDS="" -ncryptodevs=0 -ncryptoparts=0 -ncryptolvs=0 -ncryptoraids=0 -root="" -scsi_wait_scan="no" - -NET_LIST="" -LD_SO_CONF=/etc/ld.so.conf -LD_SO_CONF_D=/etc/ld.so.conf.d/ - -[ -e /etc/sysconfig/mkinitrd ] && . /etc/sysconfig/mkinitrd - -CONFMODS="$MODULES" -MODULES="" -ARCH=$(uname -m | sed -e 's/s390x/s390/') - -compress=1 -allowmissing="" -target="" -kernel="" -force="" -img_vers="" -builtins="" -modulefile=/etc/modules.conf -[ "$ARCH" != "s390" ] && withusb=1 -rc=0 -nolvm="" -nodmraid="" - -IMAGESIZE=8000 -PRESCSIMODS="" -fstab="/etc/fstab" - -vg_list="" -net_list="$NET_LIST" - -usage () { - if [ "$1" == "-n" ]; then - cmd=echo - else - cmd=error - fi - - $cmd "usage: `basename $0` [--version] [--help] [-v] [-f]" - - if [ "$1" == "-n" ]; then - exit 0 - else - exit 1 - fi -} - - -qpushd() { - pushd "$1" >/dev/null 2>&1 -} - -qpopd() { - popd >/dev/null 2>&1 -} - - -freadlink() { - readlink -f "$1" -} - -resolve_device_name() { - if [ -z "${1##UUID=*}" ]; then - real=$(freadlink /dev/disk/by-uuid/${1##UUID=}) - [ -b $real ] && { echo $real; return; } - fi - if [ -z "${1##LABEL=*}" ]; then - real=$(freadlink /dev/disk/by-label/${1##LABEL=}) - [ -b $real ] && { echo $real; return; } - fi - echo "$1" -} - -finddevnoinsys() { - majmin="$1" - if [ -n "$majmin" ]; then - dev=$(for x in /sys/block/* ; do find $x/ -name dev ; done | while read device ; do \ - echo "$majmin" | cmp -s $device && echo $device ; done) - if [ -n "$dev" ]; then - dev=${dev%%/dev} - dev=${dev%%/} - echo "$dev" - return 0 - fi - fi - return 1 -} - -finddevicedriverinsys () { - if is_iscsi $PWD; then - handleiscsi "$PWD" - return - fi - while [ "$PWD" != "/sys/devices" ]; do - deps= - if [ -f modalias ]; then - MODALIAS=$(cat modalias) - if [ "${MODALIAS::7}" == "scsi:t-" ]; then - scsi_wait_scan=yes - fi - moduledep $MODALIAS - unset MODALIAS - fi - - cd .. - done -} - -findstoragedriverinsys () { - local sysfs=$(freadlink "$1") - - # if its a partition look at the device holding the partition - if [ -f "$sysfs/start" ]; then - sysfs=$(freadlink ${sysfs%/*}) - fi - - if [[ ! "$sysfs" =~ ^/sys/.*block/.*$ ]]; then - #error "WARNING: $sysfs is a not a block sysfs path, skipping" - return - fi - - case " $handleddevices " in - *" $sysfs "*) - return ;; - *) handleddevices="$handleddevices $sysfs" ;; - esac - - if [[ "$sysfs" =~ ^/sys/.*block/md[0-9]+$ ]]; then - local raid=${sysfs##*/} - vecho "Found MDRAID component $raid" - handleraid $raid - fi - if [[ "$sysfs" =~ ^/sys/.*block/dm-[0-9]+$ ]]; then - vecho "Found DeviceMapper component ${sysfs##*/}" - handledm $(cat $sysfs/dev |cut -d : -f 1) $(cat $sysfs/dev |cut -d : -f 2) - fi - - for slave in $(ls -d "$sysfs"/slaves/* 2>/dev/null) ; do - findstoragedriverinsys "$slave" - done - - if [ -L "$sysfs/device" ]; then - qpushd $(freadlink "$sysfs/device") - finddevicedriverinsys - qpopd - fi -} - -findstoragedriver () { - local device="$1" - - if [ ! -b "$device" ]; then - #error "WARNING: $device is a not a block device, skipping" - return - fi - - local majmin=$(get_numeric_dev dec "$device") - local sysfs=$(finddevnoinsys "$majmin") - - if [ -z "$sysfs" ]; then - #error "WARNING: $device major:minor $majmin not found, skipping" - return - fi - - vecho "Looking for driver for $device in $sysfs" - findstoragedriverinsys "$sysfs" -} - -iscsi_get_rec_val() { - - # The open-iscsi 742 release changed to using flat files in - # /var/lib/iscsi. - - result=$(grep "^${2} = " "$1" | sed -e s'/.* = //') -} - -iscsi_set_parameters() { - path=$1 - vecho setting iscsi parameters - - tmpfile=$(mktemp) - - # Check once before getting explicit values, so we can output a decent - # error message. - /sbin/iscsiadm --show -m session -r $path > $tmpfile - if [ ! -s $tmpfile ]; then - echo Unable to find iscsi record for $path - exit 1 - fi - - nit_name=$(grep "^InitiatorName=" /etc/iscsi/initiatorname.iscsi | \ - sed -e "s/^InitiatorName=//") - - iscsi_get_rec_val $tmpfile "node.name" - tgt_name=${result} - iscsi_get_rec_val $tmpfile "node.tpgt" - tpgt=${result} - # iscsistart wants node.conn[0].address / port - iscsi_get_rec_val $tmpfile 'node.conn\[0\].address' - tgt_ipaddr=${result} - iscsi_get_rec_val $tmpfile 'node.conn\[0\].port' - tgt_port=${result} - - # Note: we get chap secrets (passwords) in plaintext, and also store - # them in the initrd. - - iscsi_get_rec_val $tmpfile "node.session.auth.username" - chap=${result} - if [ -n "${chap}" -a "${chap}" != "<empty>" ]; then - chap="-u ${chap}" - iscsi_get_rec_val $tmpfile "node.session.auth.password" - chap_pw="-w ${result}" - else - chap="" - fi - - iscsi_get_rec_val $tmpfile "node.session.auth.username_in" - chap_in=${result} - if [ -n "${chap_in}" -a "${chap_in}" != "<empty>" ]; then - chap_in="-U ${chap_in}" - iscsi_get_rec_val $tmpfile "node.session.auth.password_in" - chap_in_pw="-W ${result}" - else - chap_in="" - fi - - rm $tmpfile -} - -emit_iscsi () { - if [ -n "${iscsi_devs}" ]; then - for dev in ${iscsi_devs}; do - iscsi_set_parameters $dev - # recid is not really used, just use 0 for it - echo "/bin/iscsistart -t ${tgt_name} -i ${nit_name} \ - -g ${tpgt} -a ${tgt_ipaddr} ${chap} ${chap_pw} \ - ${chap_in} ${chap_in_pw}" - done - fi -} - -is_iscsi() { - path=$1 - if echo $path | grep -q "/platform/host[0-9]*/session[0-9]*/target[0-9]*:[0-9]*:[0-9]*/[0-9]*:[0-9]*:[0-9]*:[0-9]*"; then - return 0 - else - return 1 - fi -} - -handledm() { - major=$1 - minor=$2 - while read dmstart dmend dmtype r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 ; do - case "$dmtype" in - crypt) - # this device is encrypted; find the slave device and see - # whether the encryption is LUKS; if not, bail. - slavedev=$(finddevnoinsys $r3) - # get the basename, then s,!,/, in case it's a cciss device - slavedev=$(echo ${slavedev##*/} | tr '!' '/') - cryptsetup isLuks "/dev/$slavedev" 2>/dev/null || continue - find_base_dm_mods - dmname=$(dmsetup info -j $major -m $minor -c --noheadings -o name) - # do the device resolution dance to get /dev/mapper/foo - # since 'lvm lvs' doesn't like dm-X device nodes - if [[ "$slavedev" =~ ^dm- ]]; then - majmin=$(get_numeric_dev dec "/dev/$slavedev") - for dmdev in /dev/mapper/* ; do - dmnum=$(get_numeric_dev dev $dmdev) - if [ $dmnum = $majmin ]; then - slavedev=${dmdev#/dev/} - break - fi - done - fi - - # determine if $slavedev is an LV - # if so, add the device to latecryptodevs - # if not, add the device to cryptodevs - local vg=$(lvshow /dev/$slavedev) - if [ -n "$vg" ]; then - eval cryptolv${ncryptolvs}='"'/dev/$slavedev $dmname'"' - let ncryptolvs++ - elif grep -q "^$slavedev :" /proc/mdstat ; then - eval cryptoraid${ncryptoraids}='"'/dev/$slavedev $dmname'"' - let ncryptoraids++ - else - eval cryptoparts${ncryptoparts}='"'/dev/$slavedev $dmname'"' - let ncryptoparts++ - fi - - let ncryptodevs++ - findstoragedriver "/dev/$slavedev" - ;; - esac - done << EOF - $(dmsetup table -j $major -m $minor 2>/dev/null) -EOF - local name=$(dmsetup info --noheadings -c -j $major -m $minor -o name) - local vg=$(lvshow "/dev/mapper/$name") - local raids=$(/sbin/dmraid -s -craidname 2>/dev/null | grep -vi "no raid disks") - if [ -n "$vg" ]; then - vg=`echo $vg` # strip whitespace - case " $vg_list " in - *" $vg "*) ;; - *) vg_list="$vg_list $vg" - [ -z "$nolvm" ] && find_base_dm_mods - ;; - esac - fi - for raid in $raids ; do - if [ "$raid" == "$name" ]; then - case " $DMRAIDS " in - *" $raid "*) ;; - *) DMRAIDS="$DMRAIDS $raid" - [ -z "$nodmraid" ] && find_base_dm_mods - ;; - esac - break - fi - done -} - -handleiscsi() { - vecho "Found iscsi component $1" - - # We call iscsi_set_parameters once here to figure out what network to - # use (it sets tgt_ipaddr), and once again to emit iscsi values, - # not very efficient. - iscsi_set_parameters $1 - iscsi_devs="$iscsi_devs $1" - netdev=$(/sbin/ip route get to $tgt_ipaddr | \ - sed 's|.*dev \(.*\).*|\1|g' | awk '{ print $1; exit }') - addnetdev $netdev -} - -handleraid() { - local start=0 - - if [ -n "$noraid" -o ! -f /proc/mdstat ]; then - return 0 - fi - - levels=$(awk "/^$1[ ]*:/ { print\$4 }" /proc/mdstat) - - for level in $levels ; do - case $level in - linear) - start=1 - ;; - multipath) - start=1 - ;; - raid[01] | raid10) - start=1 - ;; - raid[456]) - start=1 - ;; - *) - error "raid level $level (in /proc/mdstat) not recognized" - ;; - esac - done - if [ "$start" = 1 ]; then - raiddevices="$raiddevices $1" - fi - return $start -} - -lvshow() { - lvm lvs --ignorelockingfailure --noheadings -o vg_name \ - $1 2>/dev/null | egrep -v '^ *(WARNING:|Volume Groups with)' -} - -vgdisplay() { - lvm vgdisplay --ignorelockingfailure -v $1 2>/dev/null | - sed -n 's/PV Name//p' -} - -dmmods_found="n" -find_base_dm_mods() -{ - [ "$dmmods_found" == "n" ] || return - dmmods_found="y" -} - -savedargs=$* -while [ $# -gt 0 ]; do - case $1 in - --fstab*) - if [ "$1" != "${1##--fstab=}" ]; then - fstab=${1##--fstab=} - else - fstab=$2 - shift - fi - ;; - - - -v|--verbose) - set_verbose true - ;; - --net-dev*) - if [ "$1" != "${1##--net-dev=}" ]; then - net_list="$net_list ${1##--net-dev=}" - else - net_list="$net_list $2" - shift - fi - ;; - --rootdev*) - if [ "$1" != "${1##--rootdev=}" ]; then - rootdev="${1##--rootdev=}" - else - rootdev="$2" - shift - fi - ;; - --thawdev*) - if [ "$1" != "${1##--thawdev=}" ]; then - thawdev="${1##--thawdev=}" - else - thawdev="$2" - shift - fi - ;; - --rootfs*) - if [ "$1" != "${1##--rootfs=}" ]; then - rootfs="${1##--rootfs=}" - else - rootfs="$2" - shift - fi - ;; - --rootopts*) - if [ "$1" != "${1##--rootopts=}" ]; then - rootopts="${1##--rootopts=}" - else - rootopts="$2" - shift - fi - ;; - --root*) - if [ "$1" != "${1##--root=}" ]; then - root="${1##--root=}" - else - root="$2" - shift - fi - ;; - --loopdev*) - if [ "$1" != "${1##--loopdev=}" ]; then - loopdev="${1##--loopdev=}" - else - loopdev="$2" - shift - fi - ;; - --loopfs*) - if [ "$1" != "${1##--loopfs=}" ]; then - loopfs="${1##--loopfs=}" - else - loopfs="$2" - shift - fi - ;; - --loopopts*) - if [ "$1" != "${1##--loopopts=}" ]; then - loopopts="${1##--loopopts=}" - else - loopopts="$2" - shift - fi - ;; - --looppath*) - if [ "$1" != "${1##--looppath=}" ]; then - looppath="${1##--looppath=}" - else - looppath="$2" - shift - fi - ;; - --help) - usage -n - ;; - *) - if [ -z "$target" ]; then - target=$1 - elif [ -z "$kernel" ]; then - kernel=$1 - else - usage - fi - ;; - esac - - shift -done - -[ -z "$rootfs" ] && rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' $fstab) -[ -z "$rootopts" ] && rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' $fstab) -[ -z "$rootopts" ] && rootopts="defaults" - - -[ -z "$rootdev" ] && rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab) - # check if it's nfsroot -physdev="" -if [ "$rootfs" == "nfs" ]; then - if [ "x$net_list" == "x" ]; then - handlenfs $rootdev - fi -else - # check if it's root by label - rdev=$rootdev - rdev=$(resolve_device_name "$rdev") - rootopts=$(echo $rootopts | sed -e 's/^r[ow],//' -e 's/,_netdev//' -e 's/_netdev//' -e 's/,_rnetdev//' -e 's/_rnetdev//' -e 's/,r[ow],$//' -e 's/,r[ow],/,/' -e 's/^r[ow]$/defaults/' -e 's/$/,ro/') - findstoragedriver "$rdev" -fi - - # find the first swap dev which would get used for swsusp -[ -z "$thawdev" ] && thawdev=$(awk '/^[ \t]*[^#]/ { if ($3 == "swap") { print $1; exit }}' $fstab) -swsuspdev="$thawdev" -if [ -n "$swsuspdev" ]; then - swsuspdev=$(resolve_device_name "$swsuspdev") - findstoragedriver "$swsuspdev" -fi - - -cemit() -{ - cat -} - -emit() -{ - NONL="" - if [ "$1" == "-n" ]; then - NONL="-n" - shift - fi - echo $NONL "$@" -} - -emitdmraids() -{ - if [ -z "$nodmraid" -a -n "$DMRAIDS" ]; then - for raid in $DMRAIDS; do - echo -n "rd_DM_UUID=$raid " - done - fi -} - - -# HACK: module loading + device creation isn't necessarily synchronous... -# this will make sure that we have all of our devices before trying -# things like RAID or LVM -emitdmraids - -emitcrypto() -{ - local luksuuid=$(grep "^$2 " /etc/crypttab 2>/dev/null| awk '{ print $2 }') - if [ -z "$luksuuid" ]; then - luksuuid="$2" - fi - luksuuid=${luksuuid##UUID=} - echo -n "rd_LUKS_UUID=$luksuuid " -} - -if [ -n "$raiddevices" ]; then - for dev in $raiddevices; do - uid=$(udevadm info --query=env --name /dev/${dev}|grep MD_UUID) - uid=${uid##MD_UUID=} - [ -n "$uid" ] && echo -n "rd_MD_UUID=$uid " - done -else - echo -n "rd_NO_MD " -fi - -if [ -z "$nolvm" -a -n "$vg_list" ]; then - for vg in $vg_list; do - echo -n "rd_LVM_VG=$vg " - done -else - echo -n "rd_NO_LVM " -fi - -cryptdevs="$(echo ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@})" - -if [ -z "$cryptdevs" ]; then - echo -n "rd_NO_LUKS " -else - for cryptdev in ${!cryptoraid@} ${!cryptopart@} ${!cryptolv@} ; do - emitcrypto `eval echo '$'$cryptdev` - done -fi - -# output local keyboard/18n settings -[ -e /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard -[ -e /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n - -for i in KEYTABLE SYSFONT SYSFONTACM UNIMAP LANG; do - val=$(eval echo \$$i) - [[ $val ]] && echo -n "$i=$val " -done - -if [ -n "$KEYBOARDTYPE" -a "$KEYBOARDTYPE" != "pc" ]; then - echo -n "KEYBOARDTYPE=$KEYBOARDTYPE " -fi - -if [ -n "$rootdev" ]; then - echo -n "root=$rootdev " -fi - -echo diff --git a/dracut.spec b/dracut.spec index 0275af3c..7a058ae6 100644 --- a/dracut.spec +++ b/dracut.spec @@ -318,9 +318,7 @@ rm -rf $RPM_BUILD_ROOT %files tools %defattr(-,root,root,0755) -%{_mandir}/man8/dracut-gencmdline.8* %{_mandir}/man8/dracut-catimages.8* -%{_bindir}/dracut-gencmdline %{_bindir}/dracut-catimages %dir /boot/dracut %dir /var/lib/dracut |