Imported Upstream version 3.2upstream/3.2

1 files changed, 478 insertions, 0 deletions

diff --git a/gnulib-tests/init.sh b/gnulib-tests/init.sh
new file mode 100644
index 0000000..0da6c1e
--- /dev/null
+++ b/gnulib-tests/init.sh
@@ -0,0 +1,478 @@
+# source this file; set up for tests
+
+# Copyright (C) 2009-2011 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Using this file in a test
+# =========================
+#
+# The typical skeleton of a test looks like this:
+#
+#   #!/bin/sh
+#   . "${srcdir=.}/init.sh"; path_prepend_ .
+#   Execute some commands.
+#   Note that these commands are executed in a subdirectory, therefore you
+#   need to prepend "../" to relative filenames in the build directory.
+#   Note that the "path_prepend_ ." is useful only if the body of your
+#   test invokes programs residing in the initial directory.
+#   For example, if the programs you want to test are in src/, and this test
+#   script is named tests/test-1, then you would use "path_prepend_ ../src",
+#   or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH"
+#   to all tests via automake's TESTS_ENVIRONMENT.
+#   Set the exit code 0 for success, 77 for skipped, or 1 or other for failure.
+#   Use the skip_ and fail_ functions to print a diagnostic and then exit
+#   with the corresponding exit code.
+#   Exit $?
+
+# Executing a test that uses this file
+# ====================================
+#
+# Running a single test:
+#   $ make check TESTS=test-foo.sh
+#
+# Running a single test, with verbose output:
+#   $ make check TESTS=test-foo.sh VERBOSE=yes
+#
+# Running a single test, with single-stepping:
+#   1. Go into a sub-shell:
+#   $ bash
+#   2. Set relevant environment variables from TESTS_ENVIRONMENT in the
+#      Makefile:
+#   $ export srcdir=../../tests # this is an example
+#   3. Execute the commands from the test, copy&pasting them one by one:
+#   $ . "$srcdir/init.sh"; path_prepend_ .
+#   ...
+#   4. Finally
+#   $ exit
+
+ME_=`expr "./$0" : '.*/\(.*\)$'`
+
+# We use a trap below for cleanup.  This requires us to go through
+# hoops to get the right exit status transported through the handler.
+# So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
+# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
+# sh inside this function.
+Exit () { set +e; (exit $1); exit $1; }
+
+# Print warnings (e.g., about skipped and failed tests) to this file number.
+# Override by defining to say, 9, in init.cfg, and putting say,
+#   export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2
+# in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file.
+# This is useful when using automake's parallel tests mode, to print
+# the reason for skip/failure to console, rather than to the .log files.
+: ${stderr_fileno_=2}
+
+warn_ () { echo "$@" 1>&$stderr_fileno_; }
+fail_ () { warn_ "$ME_: failed test: $@"; Exit 1; }
+skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; }
+fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; }
+framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; }
+
+# Sanitize this shell to POSIX mode, if possible.
+DUALCASE=1; export DUALCASE
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+    *posix*) set -o posix ;;
+  esac
+fi
+
+# We require $(...) support unconditionally.
+# We require a few additional shell features only when $EXEEXT is nonempty,
+# in order to support automatic $EXEEXT emulation:
+# - hyphen-containing alias names
+# - we prefer to use ${var#...} substitution, rather than having
+#   to work around lack of support for that feature.
+# The following code attempts to find a shell with support for these features.
+# If the current shell passes the test, we're done.  Otherwise, test other
+# shells until we find one that passes.  If one is found, re-exec it.
+# If no acceptable shell is found, skip the current test.
+#
+# The "...set -x; P=1 true 2>err..." test is to disqualify any shell that
+# emits "P=1" into err, as /bin/sh from SunOS 5.11 and OpenBSD 4.7 do.
+#
+# Use "9" to indicate success (rather than 0), in case some shell acts
+# like Solaris 10's /bin/sh but exits successfully instead of with status 2.
+
+# Eval this code in a subshell to determine a shell's suitability.
+# 10 - passes all tests; ok to use
+#  9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score
+#  ? - not ok
+gl_shell_test_script_='
+test $(echo y) = y || exit 1
+score_=10
+if test "$VERBOSE" = yes; then
+  test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9
+fi
+test -z "$EXEEXT" && exit $score_
+shopt -s expand_aliases
+alias a-b="echo zoo"
+v=abx
+     test ${v%x} = ab \
+  && test ${v#a} = bx \
+  && test $(a-b) = zoo \
+  && exit $score_
+'
+
+if test "x$1" = "x--no-reexec"; then
+  shift
+else
+  # Assume a working shell.  Export to subshells (setup_ needs this).
+  gl_set_x_corrupts_stderr_=false
+  export gl_set_x_corrupts_stderr_
+
+  # Record the first marginally acceptable shell.
+  marginal_=
+
+  # Search for a shell that meets our requirements.
+  for re_shell_ in __current__ "${CONFIG_SHELL:-no_shell}" \
+      /bin/sh bash dash zsh pdksh fail
+  do
+    test "$re_shell_" = no_shell && continue
+
+    # If we've made it all the way to the sentinel, "fail" without
+    # finding even a marginal shell, skip this test.
+    if test "$re_shell_" = fail; then
+      test -z "$marginal_" && skip_ failed to find an adequate shell
+      re_shell_=$marginal_
+      break
+    fi
+
+    # When testing the current shell, simply "eval" the test code.
+    # Otherwise, run it via $re_shell_ -c ...
+    if test "$re_shell_" = __current__; then
+      # 'eval'ing this code makes Solaris 10's /bin/sh exit with
+      # $? set to 2.  It does not evaluate any of the code after the
+      # "unexpected" first `('.  Thus, we must run it in a subshell.
+      ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
+    else
+      "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
+    fi
+
+    st_=$?
+
+    # $re_shell_ works just fine.  Use it.
+    if test $st_ = 10; then
+      gl_set_x_corrupts_stderr_=false
+      break
+    fi
+
+    # If this is our first marginally acceptable shell, remember it.
+    if test "$st_:$marginal_" = 9: ; then
+      marginal_="$re_shell_"
+      gl_set_x_corrupts_stderr_=true
+    fi
+  done
+
+  if test "$re_shell_" != __current__; then
+    # Found a usable shell.  Preserve -v and -x.
+    case $- in
+      *v*x* | *x*v*) opts_=-vx ;;
+      *v*) opts_=-v ;;
+      *x*) opts_=-x ;;
+      *) opts_= ;;
+    esac
+    exec "$re_shell_" $opts_ "$0" --no-reexec "$@"
+    echo "$ME_: exec failed" 1>&2
+    exit 127
+  fi
+fi
+
+test -n "$EXEEXT" && shopt -s expand_aliases
+
+# Enable glibc's malloc-perturbing option.
+# This is useful for exposing code that depends on the fact that
+# malloc-related functions often return memory that is mostly zeroed.
+# If you have the time and cycles, use valgrind to do an even better job.
+: ${MALLOC_PERTURB_=87}
+export MALLOC_PERTURB_
+
+# This is a stub function that is run upon trap (upon regular exit and
+# interrupt).  Override it with a per-test function, e.g., to unmount
+# a partition, or to undo any other global state changes.
+cleanup_ () { :; }
+
+if ( diff --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
+  compare () { diff -u "$@"; }
+elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
+  compare () { cmp -s "$@"; }
+else
+  compare () { cmp "$@"; }
+fi
+
+# An arbitrary prefix to help distinguish test directories.
+testdir_prefix_ () { printf gt; }
+
+# Run the user-overridable cleanup_ function, remove the temporary
+# directory and exit with the incoming value of $?.
+remove_tmp_ ()
+{
+  __st=$?
+  cleanup_
+  # cd out of the directory we're about to remove
+  cd "$initial_cwd_" || cd / || cd /tmp
+  chmod -R u+rwx "$test_dir_"
+  # If removal fails and exit status was to be 0, then change it to 1.
+  rm -rf "$test_dir_" || { test $__st = 0 && __st=1; }
+  exit $__st
+}
+
+# Given a directory name, DIR, if every entry in it that matches *.exe
+# contains only the specified bytes (see the case stmt below), then print
+# a space-separated list of those names and return 0.  Otherwise, don't
+# print anything and return 1.  Naming constraints apply also to DIR.
+find_exe_basenames_ ()
+{
+  feb_dir_=$1
+  feb_fail_=0
+  feb_result_=
+  feb_sp_=
+  for feb_file_ in $feb_dir_/*.exe; do
+    # If there was no *.exe file, or there existed a file named "*.exe" that
+    # was deleted between the above glob expansion and the existence test
+    # below, just skip it.
+    test "x$feb_file_" = "x$feb_dir_/*.exe" && test ! -f "$feb_file_" \
+      && continue
+    # Exempt [.exe, since we can't create a function by that name, yet
+    # we can't invoke [ by PATH search anyways due to shell builtins.
+    test "x$feb_file_" = "x$feb_dir_/[.exe" && continue
+    case $feb_file_ in
+      *[!-a-zA-Z/0-9_.+]*) feb_fail_=1; break;;
+      *) # Remove leading file name components as well as the .exe suffix.
+         feb_file_=${feb_file_##*/}
+         feb_file_=${feb_file_%.exe}
+         feb_result_="$feb_result_$feb_sp_$feb_file_";;
+    esac
+    feb_sp_=' '
+  done
+  test $feb_fail_ = 0 && printf %s "$feb_result_"
+  return $feb_fail_
+}
+
+# Consider the files in directory, $1.
+# For each file name of the form PROG.exe, create an alias named
+# PROG that simply invokes PROG.exe, then return 0.  If any selected
+# file name or the directory name, $1, contains an unexpected character,
+# define no alias and return 1.
+create_exe_shims_ ()
+{
+  case $EXEEXT in
+    '') return 0 ;;
+    .exe) ;;
+    *) echo "$0: unexpected \$EXEEXT value: $EXEEXT" 1>&2; return 1 ;;
+  esac
+
+  base_names_=`find_exe_basenames_ $1` \
+    || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 0; }
+
+  if test -n "$base_names_"; then
+    for base_ in $base_names_; do
+      alias "$base_"="$base_$EXEEXT"
+    done
+  fi
+
+  return 0
+}
+
+# Use this function to prepend to PATH an absolute name for each
+# specified, possibly-$initial_cwd_-relative, directory.
+path_prepend_ ()
+{
+  while test $# != 0; do
+    path_dir_=$1
+    case $path_dir_ in
+      '') fail_ "invalid path dir: '$1'";;
+      /*) abs_path_dir_=$path_dir_;;
+      *) abs_path_dir_=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \
+           || fail_ "invalid path dir: $path_dir_";;
+    esac
+    case $abs_path_dir_ in
+      *:*) fail_ "invalid path dir: '$abs_path_dir_'";;
+    esac
+    PATH="$abs_path_dir_:$PATH"
+
+    # Create an alias, FOO, for each FOO.exe in this directory.
+    create_exe_shims_ "$abs_path_dir_" \
+      || fail_ "something failed (above): $abs_path_dir_"
+    shift
+  done
+  export PATH
+}
+
+setup_ ()
+{
+  if test "$VERBOSE" = yes; then
+    # Test whether set -x may cause the selected shell to corrupt an
+    # application's stderr.  Many do, including zsh-4.3.10 and the /bin/sh
+    # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5.
+    # If enabling verbose output this way would cause trouble, simply
+    # issue a warning and refrain.
+    if $gl_set_x_corrupts_stderr_; then
+      warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr"
+    else
+      set -x
+    fi
+  fi
+
+  initial_cwd_=$PWD
+  fail=0
+
+  pfx_=`testdir_prefix_`
+  test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
+    || fail_ "failed to create temporary directory in $initial_cwd_"
+  cd "$test_dir_"
+
+  # As autoconf-generated configure scripts do, ensure that IFS
+  # is defined initially, so that saving and restoring $IFS works.
+  gl_init_sh_nl_='
+'
+  IFS=" ""	$gl_init_sh_nl_"
+
+  # This trap statement, along with a trap on 0 below, ensure that the
+  # temporary directory, $test_dir_, is removed upon exit as well as
+  # upon receipt of any of the listed signals.
+  for sig_ in 1 2 3 13 15; do
+    eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
+  done
+}
+
+# Create a temporary directory, much like mktemp -d does.
+# Written by Jim Meyering.
+#
+# Usage: mktempd_ /tmp phoey.XXXXXXXXXX
+#
+# First, try to use the mktemp program.
+# Failing that, we'll roll our own mktemp-like function:
+#  - try to get random bytes from /dev/urandom
+#  - failing that, generate output from a combination of quickly-varying
+#      sources and gzip.  Ignore non-varying gzip header, and extract
+#      "random" bits from there.
+#  - given those bits, map to file-name bytes using tr, and try to create
+#      the desired directory.
+#  - make only $MAX_TRIES_ attempts
+
+# Helper function.  Print $N pseudo-random bytes from a-zA-Z0-9.
+rand_bytes_ ()
+{
+  n_=$1
+
+  # Maybe try openssl rand -base64 $n_prime_|tr '+/=\012' abcd first?
+  # But if they have openssl, they probably have mktemp, too.
+
+  chars_=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
+  dev_rand_=/dev/urandom
+  if test -r "$dev_rand_"; then
+    # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194.
+    dd ibs=$n_ count=1 if=$dev_rand_ 2>/dev/null \
+      | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
+    return
+  fi
+
+  n_plus_50_=`expr $n_ + 50`
+  cmds_='date; date +%N; free; who -a; w; ps auxww; ps ef; netstat -n'
+  data_=` (eval "$cmds_") 2>&1 | gzip `
+
+  # Ensure that $data_ has length at least 50+$n_
+  while :; do
+    len_=`echo "$data_"|wc -c`
+    test $n_plus_50_ -le $len_ && break;
+    data_=` (echo "$data_"; eval "$cmds_") 2>&1 | gzip `
+  done
+
+  echo "$data_" \
+    | dd bs=1 skip=50 count=$n_ 2>/dev/null \
+    | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
+}
+
+mktempd_ ()
+{
+  case $# in
+  2);;
+  *) fail_ "Usage: mktempd_ DIR TEMPLATE";;
+  esac
+
+  destdir_=$1
+  template_=$2
+
+  MAX_TRIES_=4
+
+  # Disallow any trailing slash on specified destdir:
+  # it would subvert the post-mktemp "case"-based destdir test.
+  case $destdir_ in
+  /) ;;
+  */) fail_ "invalid destination dir: remove trailing slash(es)";;
+  esac
+
+  case $template_ in
+  *XXXX) ;;
+  *) fail_ \
+       "invalid template: $template_ (must have a suffix of at least 4 X's)";;
+  esac
+
+  # First, try to use mktemp.
+  d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
+    || fail=1
+
+  # The resulting name must be in the specified directory.
+  case $d in "$destdir_"*);; *) fail=1;; esac
+
+  # It must have created the directory.
+  test -d "$d" || fail=1
+
+  # It must have 0700 permissions.  Handle sticky "S" bits.
+  perms=`ls -dgo "$d" 2>/dev/null|tr S -` || fail=1
+  case $perms in drwx------*) ;; *) fail=1;; esac
+
+  test $fail = 0 && {
+    echo "$d"
+    return
+  }
+
+  # If we reach this point, we'll have to create a directory manually.
+
+  # Get a copy of the template without its suffix of X's.
+  base_template_=`echo "$template_"|sed 's/XX*$//'`
+
+  # Calculate how many X's we've just removed.
+  template_length_=`echo "$template_" | wc -c`
+  nx_=`echo "$base_template_" | wc -c`
+  nx_=`expr $template_length_ - $nx_`
+
+  err_=
+  i_=1
+  while :; do
+    X_=`rand_bytes_ $nx_`
+    candidate_dir_="$destdir_/$base_template_$X_"
+    err_=`mkdir -m 0700 "$candidate_dir_" 2>&1` \
+      && { echo "$candidate_dir_"; return; }
+    test $MAX_TRIES_ -le $i_ && break;
+    i_=`expr $i_ + 1`
+  done
+  fail_ "$err_"
+}
+
+# If you want to override the testdir_prefix_ function,
+# or to add more utility functions, use this file.
+test -f "$srcdir/init.cfg" \
+  && . "$srcdir/init.cfg"
+
+setup_ "$@"
+# This trap is here, rather than in the setup_ function, because some
+# shells run the exit trap at shell function exit, rather than script exit.
+trap remove_tmp_ 0