# See the file LICENSE for redistribution information.
#
# Copyright (c) 1996-2009 Oracle.  All rights reserved.
#
# $Id$
#
# TEST	recd005
# TEST	Verify reuse of file ids works on catastrophic recovery.
# TEST
# TEST	Make sure that we can do catastrophic recovery even if we open
# TEST	files using the same log file id.
proc recd005 { method args } {
	source ./include.tcl
	global rand_init

	set envargs ""
	set zero_idx [lsearch -exact $args "-zero_log"]
	if { $zero_idx != -1 } {
		set args [lreplace $args $zero_idx $zero_idx]
		set envargs "-zero_log"
	}

	set args [convert_args $method $args]
	set omethod [convert_method $method]

	puts "Recd005: $method catastrophic recovery ($envargs)"

	berkdb srand $rand_init

	set testfile1 recd005.1.db
	set testfile2 recd005.2.db
	set max_locks 2000
	set eflags "-create -txn -lock_max_locks $max_locks \
	    -lock_max_objects $max_locks -home $testdir $envargs"

	set tnum 0
	foreach sizes "{1000 10} {10 1000}" {
		foreach ops "{abort abort} {abort commit} {commit abort} \
		{commit commit}" {
			env_cleanup $testdir
			incr tnum

			set s1 [lindex $sizes 0]
			set s2 [lindex $sizes 1]
			set op1 [lindex $ops 0]
			set op2 [lindex $ops 1]
			puts "\tRecd005.$tnum: $s1 $s2 $op1 $op2"

			puts "\tRecd005.$tnum.a: creating environment"
			set env_cmd "berkdb_env $eflags"
			set dbenv [eval $env_cmd]
			error_check_bad dbenv $dbenv NULL

			# Create the two databases.
			set oflags \
			    "-create -mode 0644 -env $dbenv $args $omethod"
			set db1 [eval {berkdb_open} $oflags $testfile1]
			error_check_bad db_open $db1 NULL
			error_check_good db_open [is_substr $db1 db] 1
			error_check_good db_close [$db1 close] 0

			set db2 [eval {berkdb_open} $oflags $testfile2]
			error_check_bad db_open $db2 NULL
			error_check_good db_open [is_substr $db2 db] 1
			error_check_good db_close [$db2 close] 0
			$dbenv close

			set dbenv [eval $env_cmd]
			puts "\tRecd005.$tnum.b: Populating databases"
			eval {do_one_file  $testdir \
			    $method $dbenv $env_cmd $testfile1 $s1 $op1 } $args
			eval {do_one_file  $testdir \
			    $method $dbenv $env_cmd $testfile2 $s2 $op2 } $args

			puts "\tRecd005.$tnum.c: Verifying initial population"
			eval {check_file \
			    $testdir $env_cmd $testfile1 $op1 } $args
			eval {check_file \
			    $testdir $env_cmd $testfile2 $op2 } $args

			# Now, close the environment (so that recovery will work
			# on NT which won't allow delete of an open file).
			reset_env $dbenv

			berkdb debug_check
			puts -nonewline \
			    "\tRecd005.$tnum.d: About to run recovery ... "
			flush stdout

			set stat [catch \
			    {exec $util_path/db_recover -h $testdir -c} \
			    result]
			if { $stat == 1 } {
				error "Recovery error: $result."
			}
			puts "complete"

			# Substitute a file that will need recovery and try
			# running recovery again.
			if { $op1 == "abort" } {
				file copy -force $testdir/$testfile1.afterop \
				    $testdir/$testfile1
				move_file_extent $testdir $testfile1 \
				    afterop copy
			} else {
				file copy -force $testdir/$testfile1.init \
				    $testdir/$testfile1
				move_file_extent $testdir $testfile1 init copy
			}
			if { $op2 == "abort" } {
				file copy -force $testdir/$testfile2.afterop \
				    $testdir/$testfile2
				move_file_extent $testdir $testfile2 \
				    afterop copy
			} else {
				file copy -force $testdir/$testfile2.init \
				    $testdir/$testfile2
				move_file_extent $testdir $testfile2 init copy
			}

			berkdb debug_check
			puts -nonewline "\tRecd005.$tnum.e:\
			    About to run recovery on pre-op database ... "
			flush stdout

			set stat \
			    [catch {exec $util_path/db_recover \
			    -h $testdir -c} result]
			if { $stat == 1 } {
				error "Recovery error: $result."
			}
			puts "complete"

			set dbenv [eval $env_cmd]
			eval {check_file \
			    $testdir $env_cmd $testfile1 $op1 } $args
			eval {check_file \
			    $testdir $env_cmd $testfile2 $op2 } $args
			reset_env $dbenv

			puts "\tRecd005.$tnum.f:\
			    Verify db_printlog can read logfile"
			set tmpfile $testdir/printlog.out
			set stat [catch \
			    {exec $util_path/db_printlog -h $testdir \
			    > $tmpfile} ret]
			error_check_good db_printlog $stat 0
			fileremove $tmpfile
		}
	}
}

proc do_one_file { dir method env env_cmd filename num op args} {
	source ./include.tcl

	set init_file $dir/$filename.t1
	set afterop_file $dir/$filename.t2
	set final_file $dir/$filename.t3

	# Save the initial file and open the environment and the first file
	file copy -force $dir/$filename $dir/$filename.init
	copy_extent_file $dir $filename init
	set oflags "-auto_commit -unknown -env $env"
	set db [eval {berkdb_open} $oflags $args $filename]

	# Dump out file contents for initial case
	eval open_and_dump_file $filename $env $init_file nop \
	    dump_file_direction "-first" "-next" $args

	set txn [$env txn]
	error_check_bad txn_begin $txn NULL
	error_check_good txn_begin [is_substr $txn $env] 1

	# Now fill in the db and the txnid in the command
	populate $db $method $txn $num 0 0

	# Sync the file so that we can capture a snapshot to test
	# recovery.
	error_check_good sync:$db [$db sync] 0
	file copy -force $dir/$filename $dir/$filename.afterop
	copy_extent_file $dir $filename afterop
	eval open_and_dump_file $testdir/$filename.afterop NULL \
	    $afterop_file nop dump_file_direction "-first" "-next" $args
	error_check_good txn_$op:$txn [$txn $op] 0

	if { $op == "commit" } {
		puts "\t\tFile $filename executed and committed."
	} else {
		puts "\t\tFile $filename executed and aborted."
	}

	# Dump out file and save a copy.
	error_check_good sync:$db [$db sync] 0
	eval open_and_dump_file $testdir/$filename NULL $final_file nop \
	    dump_file_direction "-first" "-next" $args
	file copy -force $dir/$filename $dir/$filename.final
	copy_extent_file $dir $filename final

	# If this is an abort, it should match the original file.
	# If this was a commit, then this file should match the
	# afterop file.
	if { $op == "abort" } {
		filesort $init_file $init_file.sort
		filesort $final_file $final_file.sort
		error_check_good \
		    diff(initial,post-$op):diff($init_file,$final_file) \
		    [filecmp $init_file.sort $final_file.sort] 0
	} else {
		filesort $afterop_file $afterop_file.sort
		filesort $final_file $final_file.sort
		error_check_good \
		    diff(post-$op,pre-commit):diff($afterop_file,$final_file) \
		    [filecmp $afterop_file.sort $final_file.sort] 0
	}

	error_check_good close:$db [$db close] 0
}

proc check_file { dir env_cmd filename op args} {
	source ./include.tcl

	set init_file $dir/$filename.t1
	set afterop_file $dir/$filename.t2
	set final_file $dir/$filename.t3

	eval open_and_dump_file $testdir/$filename NULL $final_file nop \
	    dump_file_direction "-first" "-next" $args
	if { $op == "abort" } {
		filesort $init_file $init_file.sort
		filesort $final_file $final_file.sort
		error_check_good \
		    diff(initial,post-$op):diff($init_file,$final_file) \
		    [filecmp $init_file.sort $final_file.sort] 0
	} else {
		filesort $afterop_file $afterop_file.sort
		filesort $final_file $final_file.sort
		error_check_good \
		    diff(pre-commit,post-$op):diff($afterop_file,$final_file) \
		    [filecmp $afterop_file.sort $final_file.sort] 0
	}
}